From: Rajendra Nayak <rnayak@ti.com> To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Cc: tony@atomide.com, bcousson@baylibre.com, nm@ti.com, arnd@arndb.de, Rajendra Nayak <rnayak@ti.com>, linux-doc@vger.kernel.org Subject: [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices Date: Thu, 24 Apr 2014 15:36:25 +0530 [thread overview] Message-ID: <1398333987-19454-3-git-send-email-rnayak@ti.com> (raw) In-Reply-To: <1398333987-19454-1-git-send-email-rnayak@ti.com> DRA72x is a single core cortex A15 device with most infrastructure IPs otherwise same as whats on the DRA74x devices. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/arm/omap/omap.txt | 14 +++++-- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/dra7-evm.dts | 6 +-- arch/arm/boot/dts/dra7.dtsi | 27 ------------- arch/arm/boot/dts/dra72-evm.dts | 24 ++++++++++++ arch/arm/boot/dts/dra72x.dtsi | 25 ++++++++++++ arch/arm/boot/dts/dra74x.dtsi | 41 ++++++++++++++++++++ 7 files changed, 105 insertions(+), 35 deletions(-) create mode 100644 arch/arm/boot/dts/dra72-evm.dts create mode 100644 arch/arm/boot/dts/dra72x.dtsi create mode 100644 arch/arm/boot/dts/dra74x.dtsi diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 36ede19..1bc2338 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -79,8 +79,11 @@ SoCs: - OMAP5432 compatible = "ti,omap5432", "ti,omap5" -- DRA742 - compatible = "ti,dra7xx", "ti,dra7" +- DRA74x + compatible = "ti,dra74", "ti,dra7" + +- DRA72x + compatible = "ti,dra72", "ti,dra7" - AM4372 compatible = "ti,am4372", "ti,am43" @@ -120,5 +123,8 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" -- DRA7 EVM: Software Developement Board for DRA7XX - compatible = "ti,dra7-evm", "ti,dra7" +- DRA74 EVM: Software Developement Board for DRA74x + compatible = "ti,dra7-evm", "ti,dra74", "ti,dra7" + +- DRA72 EVM: Software Development Board for DRA72x + compatible = "ti,dra72-evm", "ti,dra72", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f..ff98a97 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -288,7 +288,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb \ am437x-gp-evm.dtb \ - dra7-evm.dtb + dra7-evm.dtb \ + dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 7807429..df6a6db 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "dra7.dtsi" +#include "dra74x.dtsi" / { - model = "TI DRA7"; - compatible = "ti,dra7-evm", "ti,dra7"; + model = "TI DRA74x"; + compatible = "ti,dra7-evm", "ti,dra74", "ti,dra7"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1..e27fec7 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -33,33 +33,6 @@ serial5 = &uart6; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts new file mode 100644 index 0000000..ead6440 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" + +/ { + model = "TI DRA72x"; + compatible = "ti,dra72-evm", "ti,dra72", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi new file mode 100644 index 0000000..236e5e3 --- /dev/null +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi new file mode 100644 index 0000000..493deab --- /dev/null +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra74", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; +}; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices Date: Thu, 24 Apr 2014 15:36:25 +0530 [thread overview] Message-ID: <1398333987-19454-3-git-send-email-rnayak@ti.com> (raw) In-Reply-To: <1398333987-19454-1-git-send-email-rnayak@ti.com> DRA72x is a single core cortex A15 device with most infrastructure IPs otherwise same as whats on the DRA74x devices. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc at vger.kernel.org Cc: devicetree at vger.kernel.org --- .../devicetree/bindings/arm/omap/omap.txt | 14 +++++-- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/dra7-evm.dts | 6 +-- arch/arm/boot/dts/dra7.dtsi | 27 ------------- arch/arm/boot/dts/dra72-evm.dts | 24 ++++++++++++ arch/arm/boot/dts/dra72x.dtsi | 25 ++++++++++++ arch/arm/boot/dts/dra74x.dtsi | 41 ++++++++++++++++++++ 7 files changed, 105 insertions(+), 35 deletions(-) create mode 100644 arch/arm/boot/dts/dra72-evm.dts create mode 100644 arch/arm/boot/dts/dra72x.dtsi create mode 100644 arch/arm/boot/dts/dra74x.dtsi diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 36ede19..1bc2338 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -79,8 +79,11 @@ SoCs: - OMAP5432 compatible = "ti,omap5432", "ti,omap5" -- DRA742 - compatible = "ti,dra7xx", "ti,dra7" +- DRA74x + compatible = "ti,dra74", "ti,dra7" + +- DRA72x + compatible = "ti,dra72", "ti,dra7" - AM4372 compatible = "ti,am4372", "ti,am43" @@ -120,5 +123,8 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" -- DRA7 EVM: Software Developement Board for DRA7XX - compatible = "ti,dra7-evm", "ti,dra7" +- DRA74 EVM: Software Developement Board for DRA74x + compatible = "ti,dra7-evm", "ti,dra74", "ti,dra7" + +- DRA72 EVM: Software Development Board for DRA72x + compatible = "ti,dra72-evm", "ti,dra72", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35c146f..ff98a97 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -288,7 +288,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb \ am437x-gp-evm.dtb \ - dra7-evm.dtb + dra7-evm.dtb \ + dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 7807429..df6a6db 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "dra7.dtsi" +#include "dra74x.dtsi" / { - model = "TI DRA7"; - compatible = "ti,dra7-evm", "ti,dra7"; + model = "TI DRA74x"; + compatible = "ti,dra7-evm", "ti,dra74", "ti,dra7"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1..e27fec7 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -33,33 +33,6 @@ serial5 = &uart6; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu at 0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu at 1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts new file mode 100644 index 0000000..ead6440 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" + +/ { + model = "TI DRA72x"; + compatible = "ti,dra72-evm", "ti,dra72", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi new file mode 100644 index 0000000..236e5e3 --- /dev/null +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi new file mode 100644 index 0000000..493deab --- /dev/null +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra74", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; +}; -- 1.7.9.5
next prev parent reply other threads:[~2014-04-24 10:06 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-04-24 10:06 [PATCH v3 0/4] ARM: DRA7: Add support for DRA72x devices Rajendra Nayak 2014-04-24 10:06 ` Rajendra Nayak [not found] ` <1398333987-19454-1-git-send-email-rnayak-l0cyMroinI0@public.gmane.org> 2014-04-24 10:06 ` [PATCH v3 1/4] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible Rajendra Nayak 2014-04-24 10:06 ` Rajendra Nayak 2014-04-24 10:06 ` Rajendra Nayak [this message] 2014-04-24 10:06 ` [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices Rajendra Nayak 2014-04-24 13:13 ` Arnd Bergmann 2014-04-24 13:13 ` Arnd Bergmann 2014-04-28 6:09 ` Rajendra Nayak 2014-04-28 6:09 ` Rajendra Nayak [not found] ` <535DF092.7000307-l0cyMroinI0@public.gmane.org> 2014-04-28 8:50 ` Arnd Bergmann 2014-04-28 8:50 ` Arnd Bergmann 2014-04-28 8:55 ` Rajendra Nayak 2014-04-28 8:55 ` Rajendra Nayak 2014-04-24 10:06 ` [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices Rajendra Nayak 2014-04-24 10:06 ` Rajendra Nayak 2014-04-24 17:09 ` Suman Anna 2014-04-24 17:09 ` Suman Anna 2014-04-28 6:10 ` Rajendra Nayak 2014-04-28 6:10 ` Rajendra Nayak 2014-04-24 10:06 ` [PATCH v3 4/4] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients Rajendra Nayak 2014-04-24 10:06 ` Rajendra Nayak
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1398333987-19454-3-git-send-email-rnayak@ti.com \ --to=rnayak@ti.com \ --cc=arnd@arndb.de \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=nm@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.