* [PATCH v12 0/2] Add support for UltraSoc System Memory Buffer
@ 2022-11-09 13:50 ` Junhao He
0 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
Add support for UltraSoc System Memory Buffer.
Change since v11:
- Modify the code style and rename the register macro according to Jonathan's comment.
- Link: https://lore.kernel.org/lkml/20221107130624.59886-1-hejunhao3@huawei.com/
Change since v10:
- Rebase onto v6.1-rc4, included similar sysfs register accessors (as same as James's patch)
- Link: https://lore.kernel.org/lkml/20221022115929.7503-1-hejunhao3@huawei.com/
Change since v9:
- Update the Contact tag in SMB document.
- Replace the spinlock with mutex.
- Do some clean-ups in "smb_enable()" and "smb_release()".
- Use classic memory mapped interface.
- Link: https://lore.kernel.org/linux-arm-kernel/20220818132231.28240-1-hejunhao3@huawei.com/
Change since v8:
- Insert a blank line at the end of the config tag in Kconfig to Randy's comment.
- Link: https://lore.kernel.org/linux-arm-kernel/20220816131634.38195-1-hejunhao3@huawei.com/
Change since v7:
- Use the macros for register bit flags and numbers of resource.
- Cleanup punctuation.
- Update the Date tag and the KernelVersion tag in the document.
- Link: https://lore.kernel.org/lkml/20220712091353.34540-1-hejunhao3@huawei.com/
Change since v6:
- Modify the code style and driver description according to Suzuki's comment.
- Modify configuration of "drvdata->reading", to void problems in open/read
concurrency scenario.
- Rename the macro of "SMB_FLOW_MASK".
- Use the "handle->head" to determine the page number and offset.
- Link: https://lore.kernel.org/linux-arm-kernel/20220606130223.57354-1-liuqi115@huawei.com/
Change since v5:
- Address the comments from Suzuki, add some comments in SMB document, and modify
configuration of "drvdata->reading", to void problems in multi-core concurrency scenario
- Link: https://lore.kernel.org/linux-arm-kernel/20220416083953.52610-1-liuqi115@huawei.com/
Change since v4:
- Add a simple document of SMB driver according to Suzuki's comment.
- Address the comments from Suzuki.
- Link: https://lore.kernel.org/linux-arm-kernel/20220128061755.31909-1-liuqi115@huawei.com/
Change since v3:
- Modify the file header according to community specifications.
- Address the comments from Mathieu.
- Link: https://lore.kernel.org/linux-arm-kernel/20211118110016.40398-1-liuqi115@huawei.com/
Change since v2:
- Move ultrasoc driver to drivers/hwtracing/coresight by Mathieu's comment.
- Link: https://lists.linaro.org/pipermail/coresight/2021-November/007310.html
Change since v1:
- Drop the document of UltraSoc according to Mathieu's comment.
- Add comments to explain some private hardware settings.
- Address the comments from Mathieu.
- Link: https://lists.linaro.org/pipermail/coresight/2021-August/006842.html
Change since RFC:
- Move driver to drivers/hwtracing/coresight/ultrasoc.
- Remove ultrasoc-axi-com.c, as AXI-COM doesn't need to be configured in
basic tracing function.
- Remove ultrasoc.c as SMB does not need to register with the ultrasoc core.
- Address the comments from Mathieu and Suzuki.
- Link: https://lists.linaro.org/pipermail/coresight/2021-June/006535.html
Qi Liu (2):
drivers/coresight: Add UltraSoc System Memory Buffer driver
Documentation: Add document for UltraSoc SMB drivers
.../sysfs-bus-coresight-devices-ultra_smb | 31 +
.../trace/coresight/ultrasoc-smb.rst | 80 +++
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/ultrasoc-smb.c | 635 ++++++++++++++++++
drivers/hwtracing/coresight/ultrasoc-smb.h | 117 ++++
6 files changed, 875 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
--
2.33.0
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v12 0/2] Add support for UltraSoc System Memory Buffer
@ 2022-11-09 13:50 ` Junhao He
0 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
Add support for UltraSoc System Memory Buffer.
Change since v11:
- Modify the code style and rename the register macro according to Jonathan's comment.
- Link: https://lore.kernel.org/lkml/20221107130624.59886-1-hejunhao3@huawei.com/
Change since v10:
- Rebase onto v6.1-rc4, included similar sysfs register accessors (as same as James's patch)
- Link: https://lore.kernel.org/lkml/20221022115929.7503-1-hejunhao3@huawei.com/
Change since v9:
- Update the Contact tag in SMB document.
- Replace the spinlock with mutex.
- Do some clean-ups in "smb_enable()" and "smb_release()".
- Use classic memory mapped interface.
- Link: https://lore.kernel.org/linux-arm-kernel/20220818132231.28240-1-hejunhao3@huawei.com/
Change since v8:
- Insert a blank line at the end of the config tag in Kconfig to Randy's comment.
- Link: https://lore.kernel.org/linux-arm-kernel/20220816131634.38195-1-hejunhao3@huawei.com/
Change since v7:
- Use the macros for register bit flags and numbers of resource.
- Cleanup punctuation.
- Update the Date tag and the KernelVersion tag in the document.
- Link: https://lore.kernel.org/lkml/20220712091353.34540-1-hejunhao3@huawei.com/
Change since v6:
- Modify the code style and driver description according to Suzuki's comment.
- Modify configuration of "drvdata->reading", to void problems in open/read
concurrency scenario.
- Rename the macro of "SMB_FLOW_MASK".
- Use the "handle->head" to determine the page number and offset.
- Link: https://lore.kernel.org/linux-arm-kernel/20220606130223.57354-1-liuqi115@huawei.com/
Change since v5:
- Address the comments from Suzuki, add some comments in SMB document, and modify
configuration of "drvdata->reading", to void problems in multi-core concurrency scenario
- Link: https://lore.kernel.org/linux-arm-kernel/20220416083953.52610-1-liuqi115@huawei.com/
Change since v4:
- Add a simple document of SMB driver according to Suzuki's comment.
- Address the comments from Suzuki.
- Link: https://lore.kernel.org/linux-arm-kernel/20220128061755.31909-1-liuqi115@huawei.com/
Change since v3:
- Modify the file header according to community specifications.
- Address the comments from Mathieu.
- Link: https://lore.kernel.org/linux-arm-kernel/20211118110016.40398-1-liuqi115@huawei.com/
Change since v2:
- Move ultrasoc driver to drivers/hwtracing/coresight by Mathieu's comment.
- Link: https://lists.linaro.org/pipermail/coresight/2021-November/007310.html
Change since v1:
- Drop the document of UltraSoc according to Mathieu's comment.
- Add comments to explain some private hardware settings.
- Address the comments from Mathieu.
- Link: https://lists.linaro.org/pipermail/coresight/2021-August/006842.html
Change since RFC:
- Move driver to drivers/hwtracing/coresight/ultrasoc.
- Remove ultrasoc-axi-com.c, as AXI-COM doesn't need to be configured in
basic tracing function.
- Remove ultrasoc.c as SMB does not need to register with the ultrasoc core.
- Address the comments from Mathieu and Suzuki.
- Link: https://lists.linaro.org/pipermail/coresight/2021-June/006535.html
Qi Liu (2):
drivers/coresight: Add UltraSoc System Memory Buffer driver
Documentation: Add document for UltraSoc SMB drivers
.../sysfs-bus-coresight-devices-ultra_smb | 31 +
.../trace/coresight/ultrasoc-smb.rst | 80 +++
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/ultrasoc-smb.c | 635 ++++++++++++++++++
drivers/hwtracing/coresight/ultrasoc-smb.h | 117 ++++
6 files changed, 875 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 13:50 ` Junhao He
@ 2022-11-09 13:50 ` Junhao He
-1 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
From: Qi Liu <liuqi115@huawei.com>
This patch adds driver for UltraSoc SMB(System Memory Buffer)
device. SMB provides a way to buffer messages from ETM, and
store these "CPU instructions trace" in system memory.
SMB is developed by UltraSoc technology, which is acquired by
Siemens, and we still use "UltraSoc" to name driver.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Tested-by: JunHao He <hejunhao3@huawei.com>
---
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/ultrasoc-smb.c | 635 +++++++++++++++++++++
drivers/hwtracing/coresight/ultrasoc-smb.h | 116 ++++
4 files changed, 763 insertions(+)
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 45c1eb5dfcb7..cb17c207a728 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -201,4 +201,15 @@ config CORESIGHT_TRBE
To compile this driver as a module, choose M here: the module will be
called coresight-trbe.
+
+config ULTRASOC_SMB
+ tristate "Ultrasoc system memory buffer drivers"
+ depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
+ help
+ This driver provides support for the Ultrasoc system memory buffer (SMB).
+ SMB is responsible for receiving the trace data from Coresight ETM devices
+ and storing them to a system buffer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ultrasoc-smb.
endif
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index b6c4a48140ec..344dba8d6ff8 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
coresight-cti-sysfs.o
+obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
new file mode 100644
index 000000000000..ea2552a98d28
--- /dev/null
+++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Siemens System Memory Buffer driver.
+ * Copyright(c) 2022, HiSilicon Limited.
+ */
+
+#include <linux/atomic.h>
+#include <linux/acpi.h>
+#include <linux/circ_buf.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include "coresight-etm-perf.h"
+#include "coresight-priv.h"
+#include "ultrasoc-smb.h"
+
+DEFINE_CORESIGHT_DEVLIST(sink_devs, "ultra_smb");
+
+#define ULTRASOC_SMB_DSM_UUID "82ae1283-7f6a-4cbe-aa06-53e8fb24db18"
+
+static bool smb_buffer_is_empty(struct smb_drv_data *drvdata)
+{
+ u32 buf_status = readl(drvdata->base + SMB_LB_INT_STS_REG);
+
+ return !FIELD_PREP(SMB_LB_INT_STS_NOT_EMPTY_MSK, buf_status);
+}
+
+static void smb_buffer_sync_status(struct smb_drv_data *drvdata)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+
+ sdb->wr_offset = readl(drvdata->base + SMB_LB_WR_ADDR_REG) - sdb->start_addr;
+ sdb->rd_offset = readl(drvdata->base + SMB_LB_RD_ADDR_REG) - sdb->start_addr;
+ sdb->full = sdb->wr_offset == sdb->rd_offset && !smb_buffer_is_empty(drvdata);
+}
+
+static void smb_reset_buffer_status(struct smb_drv_data *drvdata)
+{
+ writel(SMB_LB_INT_BUF_STS_RESET, drvdata->base + SMB_LB_INT_STS_REG);
+}
+
+/* Purge data remaining in hardware path in case them influence next trace */
+static void smb_purge_data(struct smb_drv_data *drvdata)
+{
+ writel(SMB_LB_PURGE_PURGED, drvdata->base + SMB_LB_PURGE_REG);
+}
+
+static void smb_update_data_size(struct smb_drv_data *drvdata)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+
+ smb_purge_data(drvdata);
+ smb_buffer_sync_status(drvdata);
+ if (sdb->full) {
+ sdb->data_size = sdb->buf_size;
+ return;
+ }
+
+ sdb->data_size = CIRC_CNT(sdb->wr_offset, sdb->rd_offset, sdb->buf_size);
+}
+
+static int smb_open(struct inode *inode, struct file *file)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (atomic_read(drvdata->csdev->refcnt)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ local_set(&drvdata->reading, 1);
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static ssize_t smb_read(struct file *file, char __user *data, size_t len,
+ loff_t *ppos)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ struct device *dev = &drvdata->csdev->dev;
+ ssize_t to_copy = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (!sdb->data_size) {
+ smb_update_data_size(drvdata);
+ if (!sdb->data_size)
+ goto out;
+ }
+
+ to_copy = min(sdb->data_size, len);
+
+ /* Copy parts of trace data when read pointer wrap around SMB buffer */
+ if (sdb->rd_offset + to_copy > sdb->buf_size)
+ to_copy = sdb->buf_size - sdb->rd_offset;
+
+ if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
+ to_copy)) {
+ dev_dbg(dev, "Failed to copy data to user\n");
+ to_copy = -EFAULT;
+ goto out;
+ }
+
+ *ppos += to_copy;
+ sdb->data_size -= to_copy;
+ sdb->rd_offset += to_copy;
+ sdb->rd_offset %= sdb->buf_size;
+ writel(sdb->start_addr + sdb->rd_offset,
+ drvdata->base + SMB_LB_RD_ADDR_REG);
+ dev_dbg(dev, "%zu bytes copied\n", to_copy);
+out:
+ if (!sdb->data_size)
+ smb_reset_buffer_status(drvdata);
+ mutex_unlock(&drvdata->mutex);
+
+ return to_copy;
+}
+
+static int smb_release(struct inode *inode, struct file *file)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+
+ mutex_lock(&drvdata->mutex);
+ local_set(&drvdata->reading, 0);
+ mutex_unlock(&drvdata->mutex);
+
+ return 0;
+}
+
+static const struct file_operations smb_fops = {
+ .owner = THIS_MODULE,
+ .open = smb_open,
+ .read = smb_read,
+ .release = smb_release,
+ .llseek = no_llseek,
+};
+
+static ssize_t buf_size_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(dev->parent);
+
+ return sysfs_emit(buf, "0x%lx\n", drvdata->sdb.buf_size);
+}
+static DEVICE_ATTR_RO(buf_size);
+
+static struct attribute *smb_sink_attrs[] = {
+ coresight_simple_reg32(read_pos, SMB_LB_RD_ADDR_REG),
+ coresight_simple_reg32(write_pos, SMB_LB_WR_ADDR_REG),
+ coresight_simple_reg32(buf_status, SMB_LB_INT_STS_REG),
+ &dev_attr_buf_size.attr,
+ NULL
+};
+
+static const struct attribute_group smb_sink_group = {
+ .attrs = smb_sink_attrs,
+ .name = "mgmt",
+};
+
+static const struct attribute_group *smb_sink_groups[] = {
+ &smb_sink_group,
+ NULL
+};
+
+static void smb_enable_hw(struct smb_drv_data *drvdata)
+{
+ writel(SMB_GLB_EN_HW_ENABLE, drvdata->base + SMB_GLB_EN_REG);
+}
+
+static void smb_disable_hw(struct smb_drv_data *drvdata)
+{
+ writel(0x0, drvdata->base + SMB_GLB_EN_REG);
+}
+
+static void smb_enable_sysfs(struct coresight_device *csdev)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ if (drvdata->mode != CS_MODE_DISABLED)
+ return;
+
+ smb_enable_hw(drvdata);
+ drvdata->mode = CS_MODE_SYSFS;
+}
+
+static int smb_enable_perf(struct coresight_device *csdev, void *data)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct perf_output_handle *handle = data;
+ struct cs_buffers *buf = etm_perf_sink_config(handle);
+ pid_t pid;
+
+ if (!buf)
+ return -EINVAL;
+
+ /* Get a handle on the pid of the target process */
+ pid = buf->pid;
+
+ /* Device is already in used by other session */
+ if (drvdata->pid != -1 && drvdata->pid != pid)
+ return -EBUSY;
+
+ if (drvdata->pid == -1) {
+ smb_enable_hw(drvdata);
+ drvdata->pid = pid;
+ drvdata->mode = CS_MODE_PERF;
+ }
+
+ return 0;
+}
+
+static int smb_enable(struct coresight_device *csdev, u32 mode, void *data)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ /* Do nothing, the trace data is reading by other interface now */
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Do nothing, the SMB is already enabled as other mode */
+ if (drvdata->mode != CS_MODE_DISABLED && drvdata->mode != mode) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ switch (mode) {
+ case CS_MODE_SYSFS:
+ smb_enable_sysfs(csdev);
+ break;
+ case CS_MODE_PERF:
+ ret = smb_enable_perf(csdev, data);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ goto out;
+
+ atomic_inc(csdev->refcnt);
+
+ dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n");
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static int smb_disable(struct coresight_device *csdev)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (atomic_dec_return(csdev->refcnt)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Complain if we (somehow) got out of sync */
+ WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED);
+
+ smb_disable_hw(drvdata);
+ smb_purge_data(drvdata);
+
+ /* Dissociate from the target process. */
+ drvdata->pid = -1;
+ drvdata->mode = CS_MODE_DISABLED;
+
+ dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n");
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static void *smb_alloc_buffer(struct coresight_device *csdev,
+ struct perf_event *event, void **pages,
+ int nr_pages, bool overwrite)
+{
+ struct cs_buffers *buf;
+ int node;
+
+ node = (event->cpu == -1) ? NUMA_NO_NODE : cpu_to_node(event->cpu);
+ buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
+ if (!buf)
+ return NULL;
+
+ buf->snapshot = overwrite;
+ buf->nr_pages = nr_pages;
+ buf->data_pages = pages;
+ buf->pid = task_pid_nr(event->owner);
+
+ return buf;
+}
+
+static void smb_free_buffer(void *config)
+{
+ struct cs_buffers *buf = config;
+
+ kfree(buf);
+}
+
+static void smb_sync_perf_buffer(struct smb_drv_data *drvdata,
+ struct cs_buffers *buf,
+ unsigned long head,
+ unsigned long data_size)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ char **dst_pages = (char **)buf->data_pages;
+ unsigned long to_copy;
+ long pg_idx, pg_offset;
+
+ pg_idx = head >> PAGE_SHIFT;
+ pg_offset = head & (PAGE_SIZE - 1);
+
+ while (data_size) {
+ unsigned long pg_space = PAGE_SIZE - pg_offset;
+
+ /* Copy parts of trace data when read pointer wrap around */
+ if (sdb->rd_offset + pg_space > sdb->buf_size)
+ to_copy = sdb->buf_size - sdb->rd_offset;
+ else
+ to_copy = min(data_size, pg_space);
+
+ memcpy(dst_pages[pg_idx] + pg_offset,
+ sdb->buf_base + sdb->rd_offset, to_copy);
+
+ pg_offset += to_copy;
+ if (pg_offset >= PAGE_SIZE) {
+ pg_offset = 0;
+ pg_idx++;
+ pg_idx %= buf->nr_pages;
+ }
+ data_size -= to_copy;
+ sdb->rd_offset += to_copy;
+ sdb->rd_offset %= sdb->buf_size;
+ }
+
+ sdb->data_size = 0;
+ writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR_REG);
+
+ /*
+ * Data remained in link cannot be purged when SMB is full, so
+ * synchronize the read pointer to write pointer, to make sure
+ * these remained data won't influence next trace.
+ */
+ if (sdb->full) {
+ smb_purge_data(drvdata);
+ writel(readl(drvdata->base + SMB_LB_WR_ADDR_REG),
+ drvdata->base + SMB_LB_RD_ADDR_REG);
+ }
+ smb_reset_buffer_status(drvdata);
+}
+
+static unsigned long smb_update_buffer(struct coresight_device *csdev,
+ struct perf_output_handle *handle,
+ void *sink_config)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ struct cs_buffers *buf = sink_config;
+ unsigned long data_size = 0;
+ bool lost = false;
+
+ if (!buf)
+ return 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ /* Don't do anything if another tracer is using this sink. */
+ if (atomic_read(csdev->refcnt) != 1)
+ goto out;
+
+ smb_disable_hw(drvdata);
+ smb_update_data_size(drvdata);
+ data_size = sdb->data_size;
+
+ /*
+ * The SMB buffer may be bigger than the space available in the
+ * perf ring buffer (handle->size). If so advance the offset so
+ * that we get the latest trace data.
+ */
+ if (data_size > handle->size) {
+ sdb->rd_offset += data_size - handle->size;
+ sdb->rd_offset %= sdb->buf_size;
+ data_size = handle->size;
+ lost = true;
+ }
+
+ smb_sync_perf_buffer(drvdata, buf, handle->head, data_size);
+ if (!buf->snapshot && lost)
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+
+ smb_enable_hw(drvdata);
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return data_size;
+}
+
+static const struct coresight_ops_sink smb_cs_ops = {
+ .enable = smb_enable,
+ .disable = smb_disable,
+ .alloc_buffer = smb_alloc_buffer,
+ .free_buffer = smb_free_buffer,
+ .update_buffer = smb_update_buffer,
+};
+
+static const struct coresight_ops cs_ops = {
+ .sink_ops = &smb_cs_ops,
+};
+
+static int smb_init_data_buffer(struct platform_device *pdev,
+ struct smb_data_buffer *sdb)
+{
+ struct resource *res;
+ void __iomem *base;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, SMB_BUF_ADDR_RES);
+ if (IS_ERR(res)) {
+ dev_err(&pdev->dev, "SMB device failed to get resource\n");
+ return -EINVAL;
+ }
+
+ sdb->start_addr = FIELD_PREP(SMB_BUF_ADDR_LO_MSK, res->start);
+ sdb->buf_size = resource_size(res);
+ if (sdb->buf_size == 0)
+ return -EINVAL;
+
+ /*
+ * This is a chunk of memory, use classic mapping with better
+ * performance.
+ */
+ base = devm_memremap(&pdev->dev, sdb->start_addr, sdb->buf_size,
+ MEMREMAP_WB);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ sdb->buf_base = base;
+
+ return 0;
+}
+
+static void smb_init_hw(struct smb_drv_data *drvdata)
+{
+ /* First disable SMB and clear the status of SMB buffer */
+ smb_reset_buffer_status(drvdata);
+ smb_disable_hw(drvdata);
+ smb_purge_data(drvdata);
+
+ writel(SMB_LB_CFG_LO_DEFAULT, drvdata->base + SMB_LB_CFG_LO_REG);
+ writel(SMB_LB_CFG_HI_DEFAULT, drvdata->base + SMB_LB_CFG_HI_REG);
+ writel(SMB_GLB_CFG_DEFAULT, drvdata->base + SMB_GLB_CFG_REG);
+ writel(SMB_GLB_INT_CFG, drvdata->base + SMB_GLB_INT_REG);
+ writel(SMB_LB_INT_CTRL_CFG, drvdata->base + SMB_LB_INT_CTRL_REG);
+}
+
+static int smb_register_sink(struct platform_device *pdev,
+ struct smb_drv_data *drvdata)
+{
+ struct coresight_platform_data *pdata = NULL;
+ struct coresight_desc desc = { 0 };
+ int ret;
+
+ pdata = coresight_get_platform_data(&pdev->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+
+ desc.type = CORESIGHT_DEV_TYPE_SINK;
+ desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
+ desc.ops = &cs_ops;
+ desc.pdata = pdata;
+ desc.dev = &pdev->dev;
+ desc.groups = smb_sink_groups;
+ desc.name = coresight_alloc_device_name(&sink_devs, &pdev->dev);
+ if (!desc.name) {
+ dev_err(&pdev->dev, "Failed to alloc coresight device name");
+ return -ENOMEM;
+ }
+ desc.access = CSDEV_ACCESS_IOMEM(drvdata->base);
+
+ drvdata->csdev = coresight_register(&desc);
+ if (IS_ERR(drvdata->csdev))
+ return PTR_ERR(drvdata->csdev);
+
+ drvdata->miscdev.name = desc.name;
+ drvdata->miscdev.minor = MISC_DYNAMIC_MINOR;
+ drvdata->miscdev.fops = &smb_fops;
+ ret = misc_register(&drvdata->miscdev);
+ if (ret) {
+ coresight_unregister(drvdata->csdev);
+ dev_err(&pdev->dev, "Failed to register misc, ret=%d\n", ret);
+ }
+
+ return ret;
+}
+
+static void smb_unregister_sink(struct smb_drv_data *drvdata)
+{
+ misc_deregister(&drvdata->miscdev);
+ coresight_unregister(drvdata->csdev);
+}
+
+static int smb_config_inport(struct device *dev, bool enable)
+{
+ u64 func = enable ? 1 : 0;
+ union acpi_object *obj;
+ guid_t guid;
+ u64 rev = 0;
+
+ /*
+ * Using DSM calls to enable/disable ultrasoc hardwares on
+ * tracing path, to prevent ultrasoc packet format being exposed.
+ */
+ if (guid_parse(ULTRASOC_SMB_DSM_UUID, &guid)) {
+ dev_err(dev, "Get GUID failed\n");
+ return -EINVAL;
+ }
+
+ obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, rev, func, NULL);
+ if (!obj)
+ dev_err(dev, "ACPI handle failed\n");
+ else
+ ACPI_FREE(obj);
+
+ return 0;
+}
+
+static int smb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct smb_drv_data *drvdata;
+ int ret;
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->base = devm_platform_ioremap_resource(pdev, SMB_REG_ADDR_RES);
+ if (IS_ERR(drvdata->base)) {
+ dev_err(dev, "Failed to ioremap resource\n");
+ return PTR_ERR(drvdata->base);
+ }
+
+ ret = smb_init_data_buffer(pdev, &drvdata->sdb);
+ if (ret) {
+ dev_err(dev, "Failed to init buffer, ret = %d\n", ret);
+ return ret;
+ }
+
+ smb_init_hw(drvdata);
+ mutex_init(&drvdata->mutex);
+ drvdata->pid = -1;
+
+ ret = smb_register_sink(pdev, drvdata);
+ if (ret) {
+ dev_err(dev, "Failed to register SMB sink\n");
+ return ret;
+ }
+
+ ret = smb_config_inport(dev, true);
+ if (ret) {
+ smb_unregister_sink(drvdata);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+}
+
+static int smb_remove(struct platform_device *pdev)
+{
+ struct smb_drv_data *drvdata = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = smb_config_inport(&pdev->dev, false);
+ if (ret)
+ return ret;
+
+ smb_unregister_sink(drvdata);
+
+ return 0;
+}
+
+static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
+ {"HISI03A1", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
+
+static struct platform_driver smb_driver = {
+ .driver = {
+ .name = "ultrasoc-smb",
+ .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = smb_probe,
+ .remove = smb_remove,
+};
+module_platform_driver(smb_driver);
+
+MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
+MODULE_LICENSE("Dual MIT/GPL");
+MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
+MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
new file mode 100644
index 000000000000..2e2f9f8fe54b
--- /dev/null
+++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Siemens System Memory Buffer driver.
+ * Copyright(c) 2022, HiSilicon Limited.
+ */
+
+#ifndef _ULTRASOC_SMB_H
+#define _ULTRASOC_SMB_H
+
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+
+/* Offset of SMB global registers */
+#define SMB_GLB_CFG_REG 0x00
+#define SMB_GLB_EN_REG 0x04
+#define SMB_GLB_INT_REG 0x08
+
+/* Offset of SMB logical buffer registers */
+#define SMB_LB_CFG_LO_REG 0x40
+#define SMB_LB_CFG_HI_REG 0x44
+#define SMB_LB_INT_CTRL_REG 0x48
+#define SMB_LB_INT_STS_REG 0x4c
+#define SMB_LB_RD_ADDR_REG 0x5c
+#define SMB_LB_WR_ADDR_REG 0x60
+#define SMB_LB_PURGE_REG 0x64
+
+/* Set global config register */
+#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
+#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
+#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
+#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
+#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
+ FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
+ FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
+ FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
+
+/* Set global interrupt control register */
+#define SMB_INT_EN BIT(0)
+#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
+#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
+#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
+
+/* Set logical buffer config register lower 32 bits */
+#define SMB_CFG_LO_EN BIT(0)
+#define SMB_CFG_LO_SINGLE_END BIT(1)
+#define SMB_CFG_LO_INIT BIT(8)
+#define SMB_CFG_LO_CONT BIT(11)
+#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
+#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
+ SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
+ FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
+
+/* Set logical buffer config register upper 32 bits */
+#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
+#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
+
+/* Set logical buffer interrupt control register */
+#define SMB_INT_CTRL_EN BIT(0)
+#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
+#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
+ FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
+
+#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
+#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
+#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
+#define SMB_LB_PURGE_PURGED BIT(0)
+#define SMB_GLB_EN_HW_ENABLE BIT(0)
+
+#define SMB_REG_ADDR_RES 0
+#define SMB_BUF_ADDR_RES 1
+#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
+
+/**
+ * struct smb_data_buffer - Details of the buffer used by SMB
+ * @buf_base: Memory mapped base address of SMB.
+ * @start_addr: SMB buffer start Physical address.
+ * @buf_size: Size of the buffer.
+ * @data_size: Size of Trace data copy to userspace.
+ * @rd_offset: Offset of the read pointer in the buffer.
+ * @wr_offset: Offset of the write pointer in the buffer.
+ * @full: Trace data overflow.
+ */
+struct smb_data_buffer {
+ void __iomem *buf_base;
+ u32 start_addr;
+ unsigned long buf_size;
+ unsigned long data_size;
+ unsigned long rd_offset;
+ unsigned long wr_offset;
+ bool full;
+};
+
+/**
+ * struct smb_drv_data - specifics associated to an SMB component
+ * @base: Memory mapped base address for SMB component.
+ * @csdev: Component vitals needed by the framework.
+ * @sdb: Data buffer for SMB.
+ * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
+ * @mutex: Control data access to one at a time.
+ * @reading: Synchronise user space access to SMB buffer.
+ * @pid: Process ID of the process being monitored by the
+ * session that is using this component.
+ * @mode: how this SMB is being used, perf mode or sysfs mode.
+ */
+struct smb_drv_data {
+ void __iomem *base;
+ struct coresight_device *csdev;
+ struct smb_data_buffer sdb;
+ struct miscdevice miscdev;
+ struct mutex mutex;
+ local_t reading;
+ pid_t pid;
+ u32 mode;
+};
+
+#endif
--
2.33.0
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-09 13:50 ` Junhao He
0 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
From: Qi Liu <liuqi115@huawei.com>
This patch adds driver for UltraSoc SMB(System Memory Buffer)
device. SMB provides a way to buffer messages from ETM, and
store these "CPU instructions trace" in system memory.
SMB is developed by UltraSoc technology, which is acquired by
Siemens, and we still use "UltraSoc" to name driver.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Tested-by: JunHao He <hejunhao3@huawei.com>
---
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/ultrasoc-smb.c | 635 +++++++++++++++++++++
drivers/hwtracing/coresight/ultrasoc-smb.h | 116 ++++
4 files changed, 763 insertions(+)
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 45c1eb5dfcb7..cb17c207a728 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -201,4 +201,15 @@ config CORESIGHT_TRBE
To compile this driver as a module, choose M here: the module will be
called coresight-trbe.
+
+config ULTRASOC_SMB
+ tristate "Ultrasoc system memory buffer drivers"
+ depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
+ help
+ This driver provides support for the Ultrasoc system memory buffer (SMB).
+ SMB is responsible for receiving the trace data from Coresight ETM devices
+ and storing them to a system buffer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ultrasoc-smb.
endif
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index b6c4a48140ec..344dba8d6ff8 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
coresight-cti-sysfs.o
+obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
new file mode 100644
index 000000000000..ea2552a98d28
--- /dev/null
+++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Siemens System Memory Buffer driver.
+ * Copyright(c) 2022, HiSilicon Limited.
+ */
+
+#include <linux/atomic.h>
+#include <linux/acpi.h>
+#include <linux/circ_buf.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include "coresight-etm-perf.h"
+#include "coresight-priv.h"
+#include "ultrasoc-smb.h"
+
+DEFINE_CORESIGHT_DEVLIST(sink_devs, "ultra_smb");
+
+#define ULTRASOC_SMB_DSM_UUID "82ae1283-7f6a-4cbe-aa06-53e8fb24db18"
+
+static bool smb_buffer_is_empty(struct smb_drv_data *drvdata)
+{
+ u32 buf_status = readl(drvdata->base + SMB_LB_INT_STS_REG);
+
+ return !FIELD_PREP(SMB_LB_INT_STS_NOT_EMPTY_MSK, buf_status);
+}
+
+static void smb_buffer_sync_status(struct smb_drv_data *drvdata)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+
+ sdb->wr_offset = readl(drvdata->base + SMB_LB_WR_ADDR_REG) - sdb->start_addr;
+ sdb->rd_offset = readl(drvdata->base + SMB_LB_RD_ADDR_REG) - sdb->start_addr;
+ sdb->full = sdb->wr_offset == sdb->rd_offset && !smb_buffer_is_empty(drvdata);
+}
+
+static void smb_reset_buffer_status(struct smb_drv_data *drvdata)
+{
+ writel(SMB_LB_INT_BUF_STS_RESET, drvdata->base + SMB_LB_INT_STS_REG);
+}
+
+/* Purge data remaining in hardware path in case them influence next trace */
+static void smb_purge_data(struct smb_drv_data *drvdata)
+{
+ writel(SMB_LB_PURGE_PURGED, drvdata->base + SMB_LB_PURGE_REG);
+}
+
+static void smb_update_data_size(struct smb_drv_data *drvdata)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+
+ smb_purge_data(drvdata);
+ smb_buffer_sync_status(drvdata);
+ if (sdb->full) {
+ sdb->data_size = sdb->buf_size;
+ return;
+ }
+
+ sdb->data_size = CIRC_CNT(sdb->wr_offset, sdb->rd_offset, sdb->buf_size);
+}
+
+static int smb_open(struct inode *inode, struct file *file)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (atomic_read(drvdata->csdev->refcnt)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ local_set(&drvdata->reading, 1);
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static ssize_t smb_read(struct file *file, char __user *data, size_t len,
+ loff_t *ppos)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ struct device *dev = &drvdata->csdev->dev;
+ ssize_t to_copy = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (!sdb->data_size) {
+ smb_update_data_size(drvdata);
+ if (!sdb->data_size)
+ goto out;
+ }
+
+ to_copy = min(sdb->data_size, len);
+
+ /* Copy parts of trace data when read pointer wrap around SMB buffer */
+ if (sdb->rd_offset + to_copy > sdb->buf_size)
+ to_copy = sdb->buf_size - sdb->rd_offset;
+
+ if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
+ to_copy)) {
+ dev_dbg(dev, "Failed to copy data to user\n");
+ to_copy = -EFAULT;
+ goto out;
+ }
+
+ *ppos += to_copy;
+ sdb->data_size -= to_copy;
+ sdb->rd_offset += to_copy;
+ sdb->rd_offset %= sdb->buf_size;
+ writel(sdb->start_addr + sdb->rd_offset,
+ drvdata->base + SMB_LB_RD_ADDR_REG);
+ dev_dbg(dev, "%zu bytes copied\n", to_copy);
+out:
+ if (!sdb->data_size)
+ smb_reset_buffer_status(drvdata);
+ mutex_unlock(&drvdata->mutex);
+
+ return to_copy;
+}
+
+static int smb_release(struct inode *inode, struct file *file)
+{
+ struct smb_drv_data *drvdata = container_of(file->private_data,
+ struct smb_drv_data, miscdev);
+
+ mutex_lock(&drvdata->mutex);
+ local_set(&drvdata->reading, 0);
+ mutex_unlock(&drvdata->mutex);
+
+ return 0;
+}
+
+static const struct file_operations smb_fops = {
+ .owner = THIS_MODULE,
+ .open = smb_open,
+ .read = smb_read,
+ .release = smb_release,
+ .llseek = no_llseek,
+};
+
+static ssize_t buf_size_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(dev->parent);
+
+ return sysfs_emit(buf, "0x%lx\n", drvdata->sdb.buf_size);
+}
+static DEVICE_ATTR_RO(buf_size);
+
+static struct attribute *smb_sink_attrs[] = {
+ coresight_simple_reg32(read_pos, SMB_LB_RD_ADDR_REG),
+ coresight_simple_reg32(write_pos, SMB_LB_WR_ADDR_REG),
+ coresight_simple_reg32(buf_status, SMB_LB_INT_STS_REG),
+ &dev_attr_buf_size.attr,
+ NULL
+};
+
+static const struct attribute_group smb_sink_group = {
+ .attrs = smb_sink_attrs,
+ .name = "mgmt",
+};
+
+static const struct attribute_group *smb_sink_groups[] = {
+ &smb_sink_group,
+ NULL
+};
+
+static void smb_enable_hw(struct smb_drv_data *drvdata)
+{
+ writel(SMB_GLB_EN_HW_ENABLE, drvdata->base + SMB_GLB_EN_REG);
+}
+
+static void smb_disable_hw(struct smb_drv_data *drvdata)
+{
+ writel(0x0, drvdata->base + SMB_GLB_EN_REG);
+}
+
+static void smb_enable_sysfs(struct coresight_device *csdev)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ if (drvdata->mode != CS_MODE_DISABLED)
+ return;
+
+ smb_enable_hw(drvdata);
+ drvdata->mode = CS_MODE_SYSFS;
+}
+
+static int smb_enable_perf(struct coresight_device *csdev, void *data)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct perf_output_handle *handle = data;
+ struct cs_buffers *buf = etm_perf_sink_config(handle);
+ pid_t pid;
+
+ if (!buf)
+ return -EINVAL;
+
+ /* Get a handle on the pid of the target process */
+ pid = buf->pid;
+
+ /* Device is already in used by other session */
+ if (drvdata->pid != -1 && drvdata->pid != pid)
+ return -EBUSY;
+
+ if (drvdata->pid == -1) {
+ smb_enable_hw(drvdata);
+ drvdata->pid = pid;
+ drvdata->mode = CS_MODE_PERF;
+ }
+
+ return 0;
+}
+
+static int smb_enable(struct coresight_device *csdev, u32 mode, void *data)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ /* Do nothing, the trace data is reading by other interface now */
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Do nothing, the SMB is already enabled as other mode */
+ if (drvdata->mode != CS_MODE_DISABLED && drvdata->mode != mode) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ switch (mode) {
+ case CS_MODE_SYSFS:
+ smb_enable_sysfs(csdev);
+ break;
+ case CS_MODE_PERF:
+ ret = smb_enable_perf(csdev, data);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ goto out;
+
+ atomic_inc(csdev->refcnt);
+
+ dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n");
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static int smb_disable(struct coresight_device *csdev)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (local_read(&drvdata->reading)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (atomic_dec_return(csdev->refcnt)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* Complain if we (somehow) got out of sync */
+ WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED);
+
+ smb_disable_hw(drvdata);
+ smb_purge_data(drvdata);
+
+ /* Dissociate from the target process. */
+ drvdata->pid = -1;
+ drvdata->mode = CS_MODE_DISABLED;
+
+ dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n");
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return ret;
+}
+
+static void *smb_alloc_buffer(struct coresight_device *csdev,
+ struct perf_event *event, void **pages,
+ int nr_pages, bool overwrite)
+{
+ struct cs_buffers *buf;
+ int node;
+
+ node = (event->cpu == -1) ? NUMA_NO_NODE : cpu_to_node(event->cpu);
+ buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
+ if (!buf)
+ return NULL;
+
+ buf->snapshot = overwrite;
+ buf->nr_pages = nr_pages;
+ buf->data_pages = pages;
+ buf->pid = task_pid_nr(event->owner);
+
+ return buf;
+}
+
+static void smb_free_buffer(void *config)
+{
+ struct cs_buffers *buf = config;
+
+ kfree(buf);
+}
+
+static void smb_sync_perf_buffer(struct smb_drv_data *drvdata,
+ struct cs_buffers *buf,
+ unsigned long head,
+ unsigned long data_size)
+{
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ char **dst_pages = (char **)buf->data_pages;
+ unsigned long to_copy;
+ long pg_idx, pg_offset;
+
+ pg_idx = head >> PAGE_SHIFT;
+ pg_offset = head & (PAGE_SIZE - 1);
+
+ while (data_size) {
+ unsigned long pg_space = PAGE_SIZE - pg_offset;
+
+ /* Copy parts of trace data when read pointer wrap around */
+ if (sdb->rd_offset + pg_space > sdb->buf_size)
+ to_copy = sdb->buf_size - sdb->rd_offset;
+ else
+ to_copy = min(data_size, pg_space);
+
+ memcpy(dst_pages[pg_idx] + pg_offset,
+ sdb->buf_base + sdb->rd_offset, to_copy);
+
+ pg_offset += to_copy;
+ if (pg_offset >= PAGE_SIZE) {
+ pg_offset = 0;
+ pg_idx++;
+ pg_idx %= buf->nr_pages;
+ }
+ data_size -= to_copy;
+ sdb->rd_offset += to_copy;
+ sdb->rd_offset %= sdb->buf_size;
+ }
+
+ sdb->data_size = 0;
+ writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR_REG);
+
+ /*
+ * Data remained in link cannot be purged when SMB is full, so
+ * synchronize the read pointer to write pointer, to make sure
+ * these remained data won't influence next trace.
+ */
+ if (sdb->full) {
+ smb_purge_data(drvdata);
+ writel(readl(drvdata->base + SMB_LB_WR_ADDR_REG),
+ drvdata->base + SMB_LB_RD_ADDR_REG);
+ }
+ smb_reset_buffer_status(drvdata);
+}
+
+static unsigned long smb_update_buffer(struct coresight_device *csdev,
+ struct perf_output_handle *handle,
+ void *sink_config)
+{
+ struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct smb_data_buffer *sdb = &drvdata->sdb;
+ struct cs_buffers *buf = sink_config;
+ unsigned long data_size = 0;
+ bool lost = false;
+
+ if (!buf)
+ return 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ /* Don't do anything if another tracer is using this sink. */
+ if (atomic_read(csdev->refcnt) != 1)
+ goto out;
+
+ smb_disable_hw(drvdata);
+ smb_update_data_size(drvdata);
+ data_size = sdb->data_size;
+
+ /*
+ * The SMB buffer may be bigger than the space available in the
+ * perf ring buffer (handle->size). If so advance the offset so
+ * that we get the latest trace data.
+ */
+ if (data_size > handle->size) {
+ sdb->rd_offset += data_size - handle->size;
+ sdb->rd_offset %= sdb->buf_size;
+ data_size = handle->size;
+ lost = true;
+ }
+
+ smb_sync_perf_buffer(drvdata, buf, handle->head, data_size);
+ if (!buf->snapshot && lost)
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+
+ smb_enable_hw(drvdata);
+out:
+ mutex_unlock(&drvdata->mutex);
+
+ return data_size;
+}
+
+static const struct coresight_ops_sink smb_cs_ops = {
+ .enable = smb_enable,
+ .disable = smb_disable,
+ .alloc_buffer = smb_alloc_buffer,
+ .free_buffer = smb_free_buffer,
+ .update_buffer = smb_update_buffer,
+};
+
+static const struct coresight_ops cs_ops = {
+ .sink_ops = &smb_cs_ops,
+};
+
+static int smb_init_data_buffer(struct platform_device *pdev,
+ struct smb_data_buffer *sdb)
+{
+ struct resource *res;
+ void __iomem *base;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, SMB_BUF_ADDR_RES);
+ if (IS_ERR(res)) {
+ dev_err(&pdev->dev, "SMB device failed to get resource\n");
+ return -EINVAL;
+ }
+
+ sdb->start_addr = FIELD_PREP(SMB_BUF_ADDR_LO_MSK, res->start);
+ sdb->buf_size = resource_size(res);
+ if (sdb->buf_size == 0)
+ return -EINVAL;
+
+ /*
+ * This is a chunk of memory, use classic mapping with better
+ * performance.
+ */
+ base = devm_memremap(&pdev->dev, sdb->start_addr, sdb->buf_size,
+ MEMREMAP_WB);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ sdb->buf_base = base;
+
+ return 0;
+}
+
+static void smb_init_hw(struct smb_drv_data *drvdata)
+{
+ /* First disable SMB and clear the status of SMB buffer */
+ smb_reset_buffer_status(drvdata);
+ smb_disable_hw(drvdata);
+ smb_purge_data(drvdata);
+
+ writel(SMB_LB_CFG_LO_DEFAULT, drvdata->base + SMB_LB_CFG_LO_REG);
+ writel(SMB_LB_CFG_HI_DEFAULT, drvdata->base + SMB_LB_CFG_HI_REG);
+ writel(SMB_GLB_CFG_DEFAULT, drvdata->base + SMB_GLB_CFG_REG);
+ writel(SMB_GLB_INT_CFG, drvdata->base + SMB_GLB_INT_REG);
+ writel(SMB_LB_INT_CTRL_CFG, drvdata->base + SMB_LB_INT_CTRL_REG);
+}
+
+static int smb_register_sink(struct platform_device *pdev,
+ struct smb_drv_data *drvdata)
+{
+ struct coresight_platform_data *pdata = NULL;
+ struct coresight_desc desc = { 0 };
+ int ret;
+
+ pdata = coresight_get_platform_data(&pdev->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+
+ desc.type = CORESIGHT_DEV_TYPE_SINK;
+ desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
+ desc.ops = &cs_ops;
+ desc.pdata = pdata;
+ desc.dev = &pdev->dev;
+ desc.groups = smb_sink_groups;
+ desc.name = coresight_alloc_device_name(&sink_devs, &pdev->dev);
+ if (!desc.name) {
+ dev_err(&pdev->dev, "Failed to alloc coresight device name");
+ return -ENOMEM;
+ }
+ desc.access = CSDEV_ACCESS_IOMEM(drvdata->base);
+
+ drvdata->csdev = coresight_register(&desc);
+ if (IS_ERR(drvdata->csdev))
+ return PTR_ERR(drvdata->csdev);
+
+ drvdata->miscdev.name = desc.name;
+ drvdata->miscdev.minor = MISC_DYNAMIC_MINOR;
+ drvdata->miscdev.fops = &smb_fops;
+ ret = misc_register(&drvdata->miscdev);
+ if (ret) {
+ coresight_unregister(drvdata->csdev);
+ dev_err(&pdev->dev, "Failed to register misc, ret=%d\n", ret);
+ }
+
+ return ret;
+}
+
+static void smb_unregister_sink(struct smb_drv_data *drvdata)
+{
+ misc_deregister(&drvdata->miscdev);
+ coresight_unregister(drvdata->csdev);
+}
+
+static int smb_config_inport(struct device *dev, bool enable)
+{
+ u64 func = enable ? 1 : 0;
+ union acpi_object *obj;
+ guid_t guid;
+ u64 rev = 0;
+
+ /*
+ * Using DSM calls to enable/disable ultrasoc hardwares on
+ * tracing path, to prevent ultrasoc packet format being exposed.
+ */
+ if (guid_parse(ULTRASOC_SMB_DSM_UUID, &guid)) {
+ dev_err(dev, "Get GUID failed\n");
+ return -EINVAL;
+ }
+
+ obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, rev, func, NULL);
+ if (!obj)
+ dev_err(dev, "ACPI handle failed\n");
+ else
+ ACPI_FREE(obj);
+
+ return 0;
+}
+
+static int smb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct smb_drv_data *drvdata;
+ int ret;
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->base = devm_platform_ioremap_resource(pdev, SMB_REG_ADDR_RES);
+ if (IS_ERR(drvdata->base)) {
+ dev_err(dev, "Failed to ioremap resource\n");
+ return PTR_ERR(drvdata->base);
+ }
+
+ ret = smb_init_data_buffer(pdev, &drvdata->sdb);
+ if (ret) {
+ dev_err(dev, "Failed to init buffer, ret = %d\n", ret);
+ return ret;
+ }
+
+ smb_init_hw(drvdata);
+ mutex_init(&drvdata->mutex);
+ drvdata->pid = -1;
+
+ ret = smb_register_sink(pdev, drvdata);
+ if (ret) {
+ dev_err(dev, "Failed to register SMB sink\n");
+ return ret;
+ }
+
+ ret = smb_config_inport(dev, true);
+ if (ret) {
+ smb_unregister_sink(drvdata);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+}
+
+static int smb_remove(struct platform_device *pdev)
+{
+ struct smb_drv_data *drvdata = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = smb_config_inport(&pdev->dev, false);
+ if (ret)
+ return ret;
+
+ smb_unregister_sink(drvdata);
+
+ return 0;
+}
+
+static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
+ {"HISI03A1", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
+
+static struct platform_driver smb_driver = {
+ .driver = {
+ .name = "ultrasoc-smb",
+ .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = smb_probe,
+ .remove = smb_remove,
+};
+module_platform_driver(smb_driver);
+
+MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
+MODULE_LICENSE("Dual MIT/GPL");
+MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
+MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
new file mode 100644
index 000000000000..2e2f9f8fe54b
--- /dev/null
+++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Siemens System Memory Buffer driver.
+ * Copyright(c) 2022, HiSilicon Limited.
+ */
+
+#ifndef _ULTRASOC_SMB_H
+#define _ULTRASOC_SMB_H
+
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
+
+/* Offset of SMB global registers */
+#define SMB_GLB_CFG_REG 0x00
+#define SMB_GLB_EN_REG 0x04
+#define SMB_GLB_INT_REG 0x08
+
+/* Offset of SMB logical buffer registers */
+#define SMB_LB_CFG_LO_REG 0x40
+#define SMB_LB_CFG_HI_REG 0x44
+#define SMB_LB_INT_CTRL_REG 0x48
+#define SMB_LB_INT_STS_REG 0x4c
+#define SMB_LB_RD_ADDR_REG 0x5c
+#define SMB_LB_WR_ADDR_REG 0x60
+#define SMB_LB_PURGE_REG 0x64
+
+/* Set global config register */
+#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
+#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
+#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
+#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
+#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
+ FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
+ FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
+ FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
+
+/* Set global interrupt control register */
+#define SMB_INT_EN BIT(0)
+#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
+#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
+#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
+
+/* Set logical buffer config register lower 32 bits */
+#define SMB_CFG_LO_EN BIT(0)
+#define SMB_CFG_LO_SINGLE_END BIT(1)
+#define SMB_CFG_LO_INIT BIT(8)
+#define SMB_CFG_LO_CONT BIT(11)
+#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
+#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
+ SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
+ FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
+
+/* Set logical buffer config register upper 32 bits */
+#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
+#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
+
+/* Set logical buffer interrupt control register */
+#define SMB_INT_CTRL_EN BIT(0)
+#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
+#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
+ FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
+
+#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
+#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
+#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
+#define SMB_LB_PURGE_PURGED BIT(0)
+#define SMB_GLB_EN_HW_ENABLE BIT(0)
+
+#define SMB_REG_ADDR_RES 0
+#define SMB_BUF_ADDR_RES 1
+#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
+
+/**
+ * struct smb_data_buffer - Details of the buffer used by SMB
+ * @buf_base: Memory mapped base address of SMB.
+ * @start_addr: SMB buffer start Physical address.
+ * @buf_size: Size of the buffer.
+ * @data_size: Size of Trace data copy to userspace.
+ * @rd_offset: Offset of the read pointer in the buffer.
+ * @wr_offset: Offset of the write pointer in the buffer.
+ * @full: Trace data overflow.
+ */
+struct smb_data_buffer {
+ void __iomem *buf_base;
+ u32 start_addr;
+ unsigned long buf_size;
+ unsigned long data_size;
+ unsigned long rd_offset;
+ unsigned long wr_offset;
+ bool full;
+};
+
+/**
+ * struct smb_drv_data - specifics associated to an SMB component
+ * @base: Memory mapped base address for SMB component.
+ * @csdev: Component vitals needed by the framework.
+ * @sdb: Data buffer for SMB.
+ * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
+ * @mutex: Control data access to one at a time.
+ * @reading: Synchronise user space access to SMB buffer.
+ * @pid: Process ID of the process being monitored by the
+ * session that is using this component.
+ * @mode: how this SMB is being used, perf mode or sysfs mode.
+ */
+struct smb_drv_data {
+ void __iomem *base;
+ struct coresight_device *csdev;
+ struct smb_data_buffer sdb;
+ struct miscdevice miscdev;
+ struct mutex mutex;
+ local_t reading;
+ pid_t pid;
+ u32 mode;
+};
+
+#endif
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
2022-11-09 13:50 ` Junhao He
@ 2022-11-09 13:50 ` Junhao He
-1 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
From: Qi Liu <liuqi115@huawei.com>
This patch bring in documentation for UltraSoc SMB drivers.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
---
.../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
.../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 000000000000..deaefd508105
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RW) Add/remove a SMB device from a trace path. There can be
+ multiple sources for a single SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the buffer size of each UltraSoc SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
new file mode 100644
index 000000000000..6d28ef0f6c88
--- /dev/null
+++ b/Documentation/trace/coresight/ultrasoc-smb.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+UltraSoc - HW Assisted Tracing on SoC
+======================================
+ :Author: Qi Liu <liuqi115@huawei.com>
+ :Date: March 2022
+
+Introduction
+------------
+
+UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
+way to buffer and store CPU trace messages in a region of shared system
+memory. SMB is plugged as a coresight sink device and the corresponding
+trace generators (ETM) are plugged in as source devices.
+
+Sysfs files and directories
+---------------------------
+
+The SMB devices appear on the existing coresight bus alongside the other
+coresight devices::
+
+ $# ls /sys/bus/coresight/devices/
+ ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
+
+The ``ultra_smb<N>`` named SMB associated with SCCL.::
+
+ $# ls /sys/bus/coresight/devices/ultra_smb0
+ enable_sink mgmt
+ $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
+ buf_size buf_status read_pos write_pos
+
+*Key file items are:-*
+ * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
+ * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
+ * ``buf_status``: Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+ * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
+
+Firmware Bindings
+---------------------------
+
+SMB device is only supported with ACPI, and ACPI binding of SMB device
+describes SMB device indentifier, resource information and graph structure.
+
+SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
+the _CRS method. Each SMB must present two base address, the first one is the
+configuration base address of SMB device, the second one is the base address of
+shared system memory.
+
+examples::
+
+ Device(USMB) { \
+ Name(_HID, "HISI03A1") \
+ Name(_CRS, ResourceTemplate() { \
+ MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
+ MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
+ }) \
+ Name(_DSD, Package() { \
+ ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
+ /* Use CoreSight Graph ACPI bindings to describe connections topology */
+ Package() { \
+ 0, \
+ 1, \
+ Package() { \
+ 1, \
+ ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
+ 8, \
+ Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
+ Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
+ Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
+ Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
+ Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
+ Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
+ Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
+ Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
+ } \
+ } \
+ }) \
+ }
--
2.33.0
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
@ 2022-11-09 13:50 ` Junhao He
0 siblings, 0 replies; 30+ messages in thread
From: Junhao He @ 2022-11-09 13:50 UTC (permalink / raw)
To: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng, hejunhao3
From: Qi Liu <liuqi115@huawei.com>
This patch bring in documentation for UltraSoc SMB drivers.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
---
.../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
.../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 000000000000..deaefd508105
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (RW) Add/remove a SMB device from a trace path. There can be
+ multiple sources for a single SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the buffer size of each UltraSoc SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <hejunhao3@huawei.com>
+Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
new file mode 100644
index 000000000000..6d28ef0f6c88
--- /dev/null
+++ b/Documentation/trace/coresight/ultrasoc-smb.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+UltraSoc - HW Assisted Tracing on SoC
+======================================
+ :Author: Qi Liu <liuqi115@huawei.com>
+ :Date: March 2022
+
+Introduction
+------------
+
+UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
+way to buffer and store CPU trace messages in a region of shared system
+memory. SMB is plugged as a coresight sink device and the corresponding
+trace generators (ETM) are plugged in as source devices.
+
+Sysfs files and directories
+---------------------------
+
+The SMB devices appear on the existing coresight bus alongside the other
+coresight devices::
+
+ $# ls /sys/bus/coresight/devices/
+ ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
+
+The ``ultra_smb<N>`` named SMB associated with SCCL.::
+
+ $# ls /sys/bus/coresight/devices/ultra_smb0
+ enable_sink mgmt
+ $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
+ buf_size buf_status read_pos write_pos
+
+*Key file items are:-*
+ * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
+ * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
+ * ``buf_status``: Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+ * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
+
+Firmware Bindings
+---------------------------
+
+SMB device is only supported with ACPI, and ACPI binding of SMB device
+describes SMB device indentifier, resource information and graph structure.
+
+SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
+the _CRS method. Each SMB must present two base address, the first one is the
+configuration base address of SMB device, the second one is the base address of
+shared system memory.
+
+examples::
+
+ Device(USMB) { \
+ Name(_HID, "HISI03A1") \
+ Name(_CRS, ResourceTemplate() { \
+ MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
+ MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
+ }) \
+ Name(_DSD, Package() { \
+ ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
+ /* Use CoreSight Graph ACPI bindings to describe connections topology */
+ Package() { \
+ 0, \
+ 1, \
+ Package() { \
+ 1, \
+ ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
+ 8, \
+ Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
+ Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
+ Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
+ Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
+ Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
+ Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
+ Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
+ Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
+ } \
+ } \
+ }) \
+ }
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 13:50 ` Junhao He
@ 2022-11-09 16:56 ` Jonathan Cameron
-1 siblings, 0 replies; 30+ messages in thread
From: Jonathan Cameron @ 2022-11-09 16:56 UTC (permalink / raw)
To: Junhao He
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On Wed, 9 Nov 2022 21:50:07 +0800
Junhao He <hejunhao3@huawei.com> wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch adds driver for UltraSoc SMB(System Memory Buffer)
> device. SMB provides a way to buffer messages from ETM, and
> store these "CPU instructions trace" in system memory.
>
> SMB is developed by UltraSoc technology, which is acquired by
> Siemens, and we still use "UltraSoc" to name driver.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> Tested-by: JunHao He <hejunhao3@huawei.com>
Hi JunHao,
One trivial side effect of dropping the ACPI dependency.
Also, I think (at the cost of a slightly lengthening of lines)
you can rename the register fields to avoid any potential
confusion between GLB and LB registers.
With those fixed feel free to add
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
...
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
> new file mode 100644
> index 000000000000..ea2552a98d28
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
...
> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
> + {"HISI03A1", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
> +
> +static struct platform_driver smb_driver = {
> + .driver = {
> + .name = "ultrasoc-smb",
> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
Now the driver build isn't dependent on CONFIG_ACPI
if !CONFIG_ACPI ACPI_PTR() doesn't reference the parameter.
As such you'll get unused warnings.
1 options to fix this
a) Drop ACPI_PTR() and just have .acpi_match_data = ultrasoc_smb_acpi_match
b) ifdef magic around the acpi_match table.
In theory the first option results in bloat, but in this case I doubt we care.
> + .suppress_bind_attrs = true,
> + },
> + .probe = smb_probe,
> + .remove = smb_remove,
> +};
> +module_platform_driver(smb_driver);
> +
> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
> new file mode 100644
> index 000000000000..2e2f9f8fe54b
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#ifndef _ULTRASOC_SMB_H
> +#define _ULTRASOC_SMB_H
> +
> +#include <linux/miscdevice.h>
> +#include <linux/mutex.h>
> +
> +/* Offset of SMB global registers */
> +#define SMB_GLB_CFG_REG 0x00
> +#define SMB_GLB_EN_REG 0x04
> +#define SMB_GLB_INT_REG 0x08
> +
> +/* Offset of SMB logical buffer registers */
> +#define SMB_LB_CFG_LO_REG 0x40
> +#define SMB_LB_CFG_HI_REG 0x44
> +#define SMB_LB_INT_CTRL_REG 0x48
> +#define SMB_LB_INT_STS_REG 0x4c
> +#define SMB_LB_RD_ADDR_REG 0x5c
> +#define SMB_LB_WR_ADDR_REG 0x60
> +#define SMB_LB_PURGE_REG 0x64
> +
> +/* Set global config register */
> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
Given there are several CFG registers, possibly worth
prefix of SMB_GLB_CFG_ ...
> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
> +
> +/* Set global interrupt control register */
> +#define SMB_INT_EN BIT(0)
Again, multiple INT registers, so SMB_INT_GLB_* perhaps?
> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
> +
> +/* Set logical buffer config register lower 32 bits */
> +#define SMB_CFG_LO_EN BIT(0)
SMB_LB_CFG_...
etc for other cases.
> +#define SMB_CFG_LO_SINGLE_END BIT(1)
> +#define SMB_CFG_LO_INIT BIT(8)
> +#define SMB_CFG_LO_CONT BIT(11)
> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
> +
> +/* Set logical buffer config register upper 32 bits */
> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
> +
> +/* Set logical buffer interrupt control register */
> +#define SMB_INT_CTRL_EN BIT(0)
> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
> +
> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
> +#define SMB_LB_PURGE_PURGED BIT(0)
> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
> +
> +#define SMB_REG_ADDR_RES 0
> +#define SMB_BUF_ADDR_RES 1
> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
...
> +
> +/**
> + * struct smb_drv_data - specifics associated to an SMB component
> + * @base: Memory mapped base address for SMB component.
> + * @csdev: Component vitals needed by the framework.
> + * @sdb: Data buffer for SMB.
> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
> + * @mutex: Control data access to one at a time.
> + * @reading: Synchronise user space access to SMB buffer.
> + * @pid: Process ID of the process being monitored by the
> + * session that is using this component.
> + * @mode: how this SMB is being used, perf mode or sysfs mode.
Trivial, but for consistency should be: How this...
> + */
> +struct smb_drv_data {
> + void __iomem *base;
> + struct coresight_device *csdev;
> + struct smb_data_buffer sdb;
> + struct miscdevice miscdev;
> + struct mutex mutex;
> + local_t reading;
> + pid_t pid;
> + u32 mode;
> +};
> +
> +#endif
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-09 16:56 ` Jonathan Cameron
0 siblings, 0 replies; 30+ messages in thread
From: Jonathan Cameron @ 2022-11-09 16:56 UTC (permalink / raw)
To: Junhao He
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On Wed, 9 Nov 2022 21:50:07 +0800
Junhao He <hejunhao3@huawei.com> wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch adds driver for UltraSoc SMB(System Memory Buffer)
> device. SMB provides a way to buffer messages from ETM, and
> store these "CPU instructions trace" in system memory.
>
> SMB is developed by UltraSoc technology, which is acquired by
> Siemens, and we still use "UltraSoc" to name driver.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> Tested-by: JunHao He <hejunhao3@huawei.com>
Hi JunHao,
One trivial side effect of dropping the ACPI dependency.
Also, I think (at the cost of a slightly lengthening of lines)
you can rename the register fields to avoid any potential
confusion between GLB and LB registers.
With those fixed feel free to add
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
...
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
> new file mode 100644
> index 000000000000..ea2552a98d28
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
...
> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
> + {"HISI03A1", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
> +
> +static struct platform_driver smb_driver = {
> + .driver = {
> + .name = "ultrasoc-smb",
> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
Now the driver build isn't dependent on CONFIG_ACPI
if !CONFIG_ACPI ACPI_PTR() doesn't reference the parameter.
As such you'll get unused warnings.
1 options to fix this
a) Drop ACPI_PTR() and just have .acpi_match_data = ultrasoc_smb_acpi_match
b) ifdef magic around the acpi_match table.
In theory the first option results in bloat, but in this case I doubt we care.
> + .suppress_bind_attrs = true,
> + },
> + .probe = smb_probe,
> + .remove = smb_remove,
> +};
> +module_platform_driver(smb_driver);
> +
> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
> new file mode 100644
> index 000000000000..2e2f9f8fe54b
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#ifndef _ULTRASOC_SMB_H
> +#define _ULTRASOC_SMB_H
> +
> +#include <linux/miscdevice.h>
> +#include <linux/mutex.h>
> +
> +/* Offset of SMB global registers */
> +#define SMB_GLB_CFG_REG 0x00
> +#define SMB_GLB_EN_REG 0x04
> +#define SMB_GLB_INT_REG 0x08
> +
> +/* Offset of SMB logical buffer registers */
> +#define SMB_LB_CFG_LO_REG 0x40
> +#define SMB_LB_CFG_HI_REG 0x44
> +#define SMB_LB_INT_CTRL_REG 0x48
> +#define SMB_LB_INT_STS_REG 0x4c
> +#define SMB_LB_RD_ADDR_REG 0x5c
> +#define SMB_LB_WR_ADDR_REG 0x60
> +#define SMB_LB_PURGE_REG 0x64
> +
> +/* Set global config register */
> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
Given there are several CFG registers, possibly worth
prefix of SMB_GLB_CFG_ ...
> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
> +
> +/* Set global interrupt control register */
> +#define SMB_INT_EN BIT(0)
Again, multiple INT registers, so SMB_INT_GLB_* perhaps?
> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
> +
> +/* Set logical buffer config register lower 32 bits */
> +#define SMB_CFG_LO_EN BIT(0)
SMB_LB_CFG_...
etc for other cases.
> +#define SMB_CFG_LO_SINGLE_END BIT(1)
> +#define SMB_CFG_LO_INIT BIT(8)
> +#define SMB_CFG_LO_CONT BIT(11)
> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
> +
> +/* Set logical buffer config register upper 32 bits */
> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
> +
> +/* Set logical buffer interrupt control register */
> +#define SMB_INT_CTRL_EN BIT(0)
> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
> +
> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
> +#define SMB_LB_PURGE_PURGED BIT(0)
> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
> +
> +#define SMB_REG_ADDR_RES 0
> +#define SMB_BUF_ADDR_RES 1
> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
...
> +
> +/**
> + * struct smb_drv_data - specifics associated to an SMB component
> + * @base: Memory mapped base address for SMB component.
> + * @csdev: Component vitals needed by the framework.
> + * @sdb: Data buffer for SMB.
> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
> + * @mutex: Control data access to one at a time.
> + * @reading: Synchronise user space access to SMB buffer.
> + * @pid: Process ID of the process being monitored by the
> + * session that is using this component.
> + * @mode: how this SMB is being used, perf mode or sysfs mode.
Trivial, but for consistency should be: How this...
> + */
> +struct smb_drv_data {
> + void __iomem *base;
> + struct coresight_device *csdev;
> + struct smb_data_buffer sdb;
> + struct miscdevice miscdev;
> + struct mutex mutex;
> + local_t reading;
> + pid_t pid;
> + u32 mode;
> +};
> +
> +#endif
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
2022-11-09 13:50 ` Junhao He
@ 2022-11-09 16:57 ` Jonathan Cameron
-1 siblings, 0 replies; 30+ messages in thread
From: Jonathan Cameron @ 2022-11-09 16:57 UTC (permalink / raw)
To: Junhao He
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On Wed, 9 Nov 2022 21:50:08 +0800
Junhao He <hejunhao3@huawei.com> wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
LTGM
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Thanks,
Jonathan
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <liuqi115@huawei.com>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
@ 2022-11-09 16:57 ` Jonathan Cameron
0 siblings, 0 replies; 30+ messages in thread
From: Jonathan Cameron @ 2022-11-09 16:57 UTC (permalink / raw)
To: Junhao He
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On Wed, 9 Nov 2022 21:50:08 +0800
Junhao He <hejunhao3@huawei.com> wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
LTGM
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Thanks,
Jonathan
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <liuqi115@huawei.com>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 16:56 ` Jonathan Cameron
@ 2022-11-10 11:13 ` hejunhao
-1 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-10 11:13 UTC (permalink / raw)
To: Jonathan Cameron
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On 2022/11/10 0:56, Jonathan Cameron wrote:
> On Wed, 9 Nov 2022 21:50:07 +0800
> Junhao He <hejunhao3@huawei.com> wrote:
>
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch adds driver for UltraSoc SMB(System Memory Buffer)
>> device. SMB provides a way to buffer messages from ETM, and
>> store these "CPU instructions trace" in system memory.
>>
>> SMB is developed by UltraSoc technology, which is acquired by
>> Siemens, and we still use "UltraSoc" to name driver.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
>> Tested-by: JunHao He <hejunhao3@huawei.com>
> Hi JunHao,
>
> One trivial side effect of dropping the ACPI dependency.
>
> Also, I think (at the cost of a slightly lengthening of lines)
> you can rename the register fields to avoid any potential
> confusion between GLB and LB registers.
>
> With those fixed feel free to add
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
Hi Jonathan,
Thanks for you comments!
I will fix these in the next version.
Thanks.
>
> ...
>
>> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
>> new file mode 100644
>> index 000000000000..ea2552a98d28
>> --- /dev/null
>> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
> ...
>
>> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
>> + {"HISI03A1", 0},
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
>> +
>> +static struct platform_driver smb_driver = {
>> + .driver = {
>> + .name = "ultrasoc-smb",
>> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
> Now the driver build isn't dependent on CONFIG_ACPI
> if !CONFIG_ACPI ACPI_PTR() doesn't reference the parameter.
> As such you'll get unused warnings.
>
> 1 options to fix this
> a) Drop ACPI_PTR() and just have .acpi_match_data = ultrasoc_smb_acpi_match
> b) ifdef magic around the acpi_match table.
>
> In theory the first option results in bloat, but in this case I doubt we care.
Ok, will fix it, as follows
```
#ifdef CONFIG_ACPI
static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
{"HISI03A1", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
#endif
```
>> + .suppress_bind_attrs = true,
>> + },
>> + .probe = smb_probe,
>> + .remove = smb_remove,
>> +};
>> +module_platform_driver(smb_driver);
>> +
>> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
>> +MODULE_LICENSE("Dual MIT/GPL");
>> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
>> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
>> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
>> new file mode 100644
>> index 000000000000..2e2f9f8fe54b
>> --- /dev/null
>> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
>> @@ -0,0 +1,116 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Siemens System Memory Buffer driver.
>> + * Copyright(c) 2022, HiSilicon Limited.
>> + */
>> +
>> +#ifndef _ULTRASOC_SMB_H
>> +#define _ULTRASOC_SMB_H
>> +
>> +#include <linux/miscdevice.h>
>> +#include <linux/mutex.h>
>> +
>> +/* Offset of SMB global registers */
>> +#define SMB_GLB_CFG_REG 0x00
>> +#define SMB_GLB_EN_REG 0x04
>> +#define SMB_GLB_INT_REG 0x08
>> +
>> +/* Offset of SMB logical buffer registers */
>> +#define SMB_LB_CFG_LO_REG 0x40
>> +#define SMB_LB_CFG_HI_REG 0x44
>> +#define SMB_LB_INT_CTRL_REG 0x48
>> +#define SMB_LB_INT_STS_REG 0x4c
>> +#define SMB_LB_RD_ADDR_REG 0x5c
>> +#define SMB_LB_WR_ADDR_REG 0x60
>> +#define SMB_LB_PURGE_REG 0x64
>> +
>> +/* Set global config register */
>> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
> Given there are several CFG registers, possibly worth
> prefix of SMB_GLB_CFG_ ...
Sure, I will do that.
>> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
>> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
>> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
>> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
>> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
>> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
>> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
>> +
>> +/* Set global interrupt control register */
>> +#define SMB_INT_EN BIT(0)
> Again, multiple INT registers, so SMB_INT_GLB_* perhaps?
Ok, will fix it.
>> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
>> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
>> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
>> +
>> +/* Set logical buffer config register lower 32 bits */
>> +#define SMB_CFG_LO_EN BIT(0)
> SMB_LB_CFG_...
>
> etc for other cases.
Sure, I will do that.
>> +#define SMB_CFG_LO_SINGLE_END BIT(1)
>> +#define SMB_CFG_LO_INIT BIT(8)
>> +#define SMB_CFG_LO_CONT BIT(11)
>> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
>> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
>> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
>> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
>> +
>> +/* Set logical buffer config register upper 32 bits */
>> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
>> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
>> +
>> +/* Set logical buffer interrupt control register */
>> +#define SMB_INT_CTRL_EN BIT(0)
>> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
>> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
>> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
>> +
>> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
>> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
>> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
>> +#define SMB_LB_PURGE_PURGED BIT(0)
>> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
>> +
>> +#define SMB_REG_ADDR_RES 0
>> +#define SMB_BUF_ADDR_RES 1
>> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
> ...
>
>> +
>> +/**
>> + * struct smb_drv_data - specifics associated to an SMB component
>> + * @base: Memory mapped base address for SMB component.
>> + * @csdev: Component vitals needed by the framework.
>> + * @sdb: Data buffer for SMB.
>> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
>> + * @mutex: Control data access to one at a time.
>> + * @reading: Synchronise user space access to SMB buffer.
>> + * @pid: Process ID of the process being monitored by the
>> + * session that is using this component.
>> + * @mode: how this SMB is being used, perf mode or sysfs mode.
> Trivial, but for consistency should be: How this...
Yes, I will do that.
>> + */
>> +struct smb_drv_data {
>> + void __iomem *base;
>> + struct coresight_device *csdev;
>> + struct smb_data_buffer sdb;
>> + struct miscdevice miscdev;
>> + struct mutex mutex;
>> + local_t reading;
>> + pid_t pid;
>> + u32 mode;
>> +};
>> +
>> +#endif
> .
>
Best regards,
Junhao.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-10 11:13 ` hejunhao
0 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-10 11:13 UTC (permalink / raw)
To: Jonathan Cameron
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On 2022/11/10 0:56, Jonathan Cameron wrote:
> On Wed, 9 Nov 2022 21:50:07 +0800
> Junhao He <hejunhao3@huawei.com> wrote:
>
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch adds driver for UltraSoc SMB(System Memory Buffer)
>> device. SMB provides a way to buffer messages from ETM, and
>> store these "CPU instructions trace" in system memory.
>>
>> SMB is developed by UltraSoc technology, which is acquired by
>> Siemens, and we still use "UltraSoc" to name driver.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
>> Tested-by: JunHao He <hejunhao3@huawei.com>
> Hi JunHao,
>
> One trivial side effect of dropping the ACPI dependency.
>
> Also, I think (at the cost of a slightly lengthening of lines)
> you can rename the register fields to avoid any potential
> confusion between GLB and LB registers.
>
> With those fixed feel free to add
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
Hi Jonathan,
Thanks for you comments!
I will fix these in the next version.
Thanks.
>
> ...
>
>> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
>> new file mode 100644
>> index 000000000000..ea2552a98d28
>> --- /dev/null
>> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
> ...
>
>> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
>> + {"HISI03A1", 0},
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
>> +
>> +static struct platform_driver smb_driver = {
>> + .driver = {
>> + .name = "ultrasoc-smb",
>> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
> Now the driver build isn't dependent on CONFIG_ACPI
> if !CONFIG_ACPI ACPI_PTR() doesn't reference the parameter.
> As such you'll get unused warnings.
>
> 1 options to fix this
> a) Drop ACPI_PTR() and just have .acpi_match_data = ultrasoc_smb_acpi_match
> b) ifdef magic around the acpi_match table.
>
> In theory the first option results in bloat, but in this case I doubt we care.
Ok, will fix it, as follows
```
#ifdef CONFIG_ACPI
static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
{"HISI03A1", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
#endif
```
>> + .suppress_bind_attrs = true,
>> + },
>> + .probe = smb_probe,
>> + .remove = smb_remove,
>> +};
>> +module_platform_driver(smb_driver);
>> +
>> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
>> +MODULE_LICENSE("Dual MIT/GPL");
>> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
>> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
>> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
>> new file mode 100644
>> index 000000000000..2e2f9f8fe54b
>> --- /dev/null
>> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
>> @@ -0,0 +1,116 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Siemens System Memory Buffer driver.
>> + * Copyright(c) 2022, HiSilicon Limited.
>> + */
>> +
>> +#ifndef _ULTRASOC_SMB_H
>> +#define _ULTRASOC_SMB_H
>> +
>> +#include <linux/miscdevice.h>
>> +#include <linux/mutex.h>
>> +
>> +/* Offset of SMB global registers */
>> +#define SMB_GLB_CFG_REG 0x00
>> +#define SMB_GLB_EN_REG 0x04
>> +#define SMB_GLB_INT_REG 0x08
>> +
>> +/* Offset of SMB logical buffer registers */
>> +#define SMB_LB_CFG_LO_REG 0x40
>> +#define SMB_LB_CFG_HI_REG 0x44
>> +#define SMB_LB_INT_CTRL_REG 0x48
>> +#define SMB_LB_INT_STS_REG 0x4c
>> +#define SMB_LB_RD_ADDR_REG 0x5c
>> +#define SMB_LB_WR_ADDR_REG 0x60
>> +#define SMB_LB_PURGE_REG 0x64
>> +
>> +/* Set global config register */
>> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
> Given there are several CFG registers, possibly worth
> prefix of SMB_GLB_CFG_ ...
Sure, I will do that.
>> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
>> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
>> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
>> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
>> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
>> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
>> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
>> +
>> +/* Set global interrupt control register */
>> +#define SMB_INT_EN BIT(0)
> Again, multiple INT registers, so SMB_INT_GLB_* perhaps?
Ok, will fix it.
>> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
>> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
>> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
>> +
>> +/* Set logical buffer config register lower 32 bits */
>> +#define SMB_CFG_LO_EN BIT(0)
> SMB_LB_CFG_...
>
> etc for other cases.
Sure, I will do that.
>> +#define SMB_CFG_LO_SINGLE_END BIT(1)
>> +#define SMB_CFG_LO_INIT BIT(8)
>> +#define SMB_CFG_LO_CONT BIT(11)
>> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
>> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
>> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
>> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
>> +
>> +/* Set logical buffer config register upper 32 bits */
>> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
>> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
>> +
>> +/* Set logical buffer interrupt control register */
>> +#define SMB_INT_CTRL_EN BIT(0)
>> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
>> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
>> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
>> +
>> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
>> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
>> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
>> +#define SMB_LB_PURGE_PURGED BIT(0)
>> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
>> +
>> +#define SMB_REG_ADDR_RES 0
>> +#define SMB_BUF_ADDR_RES 1
>> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
> ...
>
>> +
>> +/**
>> + * struct smb_drv_data - specifics associated to an SMB component
>> + * @base: Memory mapped base address for SMB component.
>> + * @csdev: Component vitals needed by the framework.
>> + * @sdb: Data buffer for SMB.
>> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
>> + * @mutex: Control data access to one at a time.
>> + * @reading: Synchronise user space access to SMB buffer.
>> + * @pid: Process ID of the process being monitored by the
>> + * session that is using this component.
>> + * @mode: how this SMB is being used, perf mode or sysfs mode.
> Trivial, but for consistency should be: How this...
Yes, I will do that.
>> + */
>> +struct smb_drv_data {
>> + void __iomem *base;
>> + struct coresight_device *csdev;
>> + struct smb_data_buffer sdb;
>> + struct miscdevice miscdev;
>> + struct mutex mutex;
>> + local_t reading;
>> + pid_t pid;
>> + u32 mode;
>> +};
>> +
>> +#endif
> .
>
Best regards,
Junhao.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
2022-11-09 16:57 ` Jonathan Cameron
@ 2022-11-10 11:20 ` hejunhao
-1 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-10 11:20 UTC (permalink / raw)
To: Jonathan Cameron
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On 2022/11/10 0:57, Jonathan Cameron wrote:
> On Wed, 9 Nov 2022 21:50:08 +0800
> Junhao He <hejunhao3@huawei.com> wrote:
>
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> LTGM
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Thanks,
>
> Jonathan
Hi Jonathan,
Thanks for your review!
Best regards,
Junhao.
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <liuqi115@huawei.com>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
> .
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
@ 2022-11-10 11:20 ` hejunhao
0 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-10 11:20 UTC (permalink / raw)
To: Jonathan Cameron
Cc: mathieu.poirier, suzuki.poulose, mike.leach, leo.yan, john.garry,
coresight, linux-kernel, linux-arm-kernel, lpieralisi, linuxarm,
liuqi115, f.fangjian, prime.zeng
On 2022/11/10 0:57, Jonathan Cameron wrote:
> On Wed, 9 Nov 2022 21:50:08 +0800
> Junhao He <hejunhao3@huawei.com> wrote:
>
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> LTGM
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Thanks,
>
> Jonathan
Hi Jonathan,
Thanks for your review!
Best regards,
Junhao.
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <liuqi115@huawei.com>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
> .
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 13:50 ` Junhao He
@ 2022-11-10 12:05 ` Yicong Yang
-1 siblings, 0 replies; 30+ messages in thread
From: Yicong Yang @ 2022-11-10 12:05 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
Hi Junhao,
On 2022/11/9 21:50, Junhao He wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch adds driver for UltraSoc SMB(System Memory Buffer)
> device. SMB provides a way to buffer messages from ETM, and
> store these "CPU instructions trace" in system memory.
>
> SMB is developed by UltraSoc technology, which is acquired by
> Siemens, and we still use "UltraSoc" to name driver.
>
Some comments inline.
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> Tested-by: JunHao He <hejunhao3@huawei.com>
> ---
> drivers/hwtracing/coresight/Kconfig | 11 +
> drivers/hwtracing/coresight/Makefile | 1 +
> drivers/hwtracing/coresight/ultrasoc-smb.c | 635 +++++++++++++++++++++
> drivers/hwtracing/coresight/ultrasoc-smb.h | 116 ++++
> 4 files changed, 763 insertions(+)
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 45c1eb5dfcb7..cb17c207a728 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -201,4 +201,15 @@ config CORESIGHT_TRBE
>
> To compile this driver as a module, choose M here: the module will be
> called coresight-trbe.
> +
> +config ULTRASOC_SMB
> + tristate "Ultrasoc system memory buffer drivers"
> + depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
> + help
> + This driver provides support for the Ultrasoc system memory buffer (SMB).
> + SMB is responsible for receiving the trace data from Coresight ETM devices
> + and storing them to a system buffer.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called ultrasoc-smb.
> endif
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index b6c4a48140ec..344dba8d6ff8 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -27,3 +27,4 @@ obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
> coresight-cti-sysfs.o
> +obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
> new file mode 100644
> index 000000000000..ea2552a98d28
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
> @@ -0,0 +1,635 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/acpi.h>
> +#include <linux/circ_buf.h>
> +#include <linux/err.h>
> +#include <linux/fs.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "coresight-etm-perf.h"
> +#include "coresight-priv.h"
> +#include "ultrasoc-smb.h"
> +
> +DEFINE_CORESIGHT_DEVLIST(sink_devs, "ultra_smb");
> +
> +#define ULTRASOC_SMB_DSM_UUID "82ae1283-7f6a-4cbe-aa06-53e8fb24db18"
> +
> +static bool smb_buffer_is_empty(struct smb_drv_data *drvdata)
> +{
> + u32 buf_status = readl(drvdata->base + SMB_LB_INT_STS_REG);
> +
> + return !FIELD_PREP(SMB_LB_INT_STS_NOT_EMPTY_MSK, buf_status);
Should be FIELD_GET() here?
> +}
> +
> +static void smb_buffer_sync_status(struct smb_drv_data *drvdata)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> +
> + sdb->wr_offset = readl(drvdata->base + SMB_LB_WR_ADDR_REG) - sdb->start_addr;
> + sdb->rd_offset = readl(drvdata->base + SMB_LB_RD_ADDR_REG) - sdb->start_addr;
> + sdb->full = sdb->wr_offset == sdb->rd_offset && !smb_buffer_is_empty(drvdata);
Mistake here? Why to overwrite wr_offset?
> +}
> +
> +static void smb_reset_buffer_status(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_LB_INT_BUF_STS_RESET, drvdata->base + SMB_LB_INT_STS_REG);
You'll reset other fields of SMB_LB_INT_STS_REG since SMB_LB_INT_BUF_STS_RESET is only
BIT [3, 0], if it's not intended I'd suggest to only update the necessary fields. So is
other places.
> +}
> +
> +/* Purge data remaining in hardware path in case them influence next trace */
> +static void smb_purge_data(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_LB_PURGE_PURGED, drvdata->base + SMB_LB_PURGE_REG);
> +}
> +
> +static void smb_update_data_size(struct smb_drv_data *drvdata)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> +
> + smb_purge_data(drvdata);
> + smb_buffer_sync_status(drvdata);
> + if (sdb->full) {
> + sdb->data_size = sdb->buf_size;
> + return;
> + }
> +
> + sdb->data_size = CIRC_CNT(sdb->wr_offset, sdb->rd_offset, sdb->buf_size);
> +}
> +
> +static int smb_open(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (atomic_read(drvdata->csdev->refcnt)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + local_set(&drvdata->reading, 1);
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t smb_read(struct file *file, char __user *data, size_t len,
> + loff_t *ppos)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct device *dev = &drvdata->csdev->dev;
> + ssize_t to_copy = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (!sdb->data_size) {
> + smb_update_data_size(drvdata);
> + if (!sdb->data_size)
> + goto out;
> + }
> +
It'd be better to check this earlier in open().
> + to_copy = min(sdb->data_size, len);
> +
> + /* Copy parts of trace data when read pointer wrap around SMB buffer */
> + if (sdb->rd_offset + to_copy > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> +
> + if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
> + to_copy)) {
> + dev_dbg(dev, "Failed to copy data to user\n");
> + to_copy = -EFAULT;
> + goto out;
> + }
> +
> + *ppos += to_copy;
> + sdb->data_size -= to_copy;
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + writel(sdb->start_addr + sdb->rd_offset,
> + drvdata->base + SMB_LB_RD_ADDR_REG);
> + dev_dbg(dev, "%zu bytes copied\n", to_copy);
> +out:
> + if (!sdb->data_size)
> + smb_reset_buffer_status(drvdata);
> + mutex_unlock(&drvdata->mutex);
> +
> + return to_copy;
> +}
> +
> +static int smb_release(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> +
> + mutex_lock(&drvdata->mutex);
> + local_set(&drvdata->reading, 0);
> + mutex_unlock(&drvdata->mutex);
> +
> + return 0;
> +}
> +
> +static const struct file_operations smb_fops = {
> + .owner = THIS_MODULE,
> + .open = smb_open,
> + .read = smb_read,
> + .release = smb_release,
> + .llseek = no_llseek,
> +};
> +
> +static ssize_t buf_size_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(dev->parent);
> +
> + return sysfs_emit(buf, "0x%lx\n", drvdata->sdb.buf_size);
Need to update the data size before sysfs_emit().
> +}
> +static DEVICE_ATTR_RO(buf_size);
> +
> +static struct attribute *smb_sink_attrs[] = {
> + coresight_simple_reg32(read_pos, SMB_LB_RD_ADDR_REG),
> + coresight_simple_reg32(write_pos, SMB_LB_WR_ADDR_REG),
> + coresight_simple_reg32(buf_status, SMB_LB_INT_STS_REG),
> + &dev_attr_buf_size.attr,
> + NULL
> +};
> +
> +static const struct attribute_group smb_sink_group = {
> + .attrs = smb_sink_attrs,
> + .name = "mgmt",
> +};
> +
> +static const struct attribute_group *smb_sink_groups[] = {
> + &smb_sink_group,
> + NULL
> +};
> +
> +static void smb_enable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_GLB_EN_HW_ENABLE, drvdata->base + SMB_GLB_EN_REG);
> +}
> +
> +static void smb_disable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(0x0, drvdata->base + SMB_GLB_EN_REG);
> +}
> +
> +static void smb_enable_sysfs(struct coresight_device *csdev)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> +
> + if (drvdata->mode != CS_MODE_DISABLED)
> + return;
> +
> + smb_enable_hw(drvdata);
> + drvdata->mode = CS_MODE_SYSFS;
> +}
> +
> +static int smb_enable_perf(struct coresight_device *csdev, void *data)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + struct perf_output_handle *handle = data;
> + struct cs_buffers *buf = etm_perf_sink_config(handle);
> + pid_t pid;
> +
> + if (!buf)
> + return -EINVAL;
> +
> + /* Get a handle on the pid of the target process */
> + pid = buf->pid;
> +
> + /* Device is already in used by other session */
> + if (drvdata->pid != -1 && drvdata->pid != pid)
> + return -EBUSY;
> +
> + if (drvdata->pid == -1) {
> + smb_enable_hw(drvdata);
> + drvdata->pid = pid;
> + drvdata->mode = CS_MODE_PERF;
> + }
> +
> + return 0;
> +}
> +
> +static int smb_enable(struct coresight_device *csdev, u32 mode, void *data)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + /* Do nothing, the trace data is reading by other interface now */
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + /* Do nothing, the SMB is already enabled as other mode */
> + if (drvdata->mode != CS_MODE_DISABLED && drvdata->mode != mode) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + switch (mode) {
> + case CS_MODE_SYSFS:
> + smb_enable_sysfs(csdev);
> + break;
> + case CS_MODE_PERF:
> + ret = smb_enable_perf(csdev, data);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + if (ret)
> + goto out;
> +
> + atomic_inc(csdev->refcnt);
> +
> + dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n");
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static int smb_disable(struct coresight_device *csdev)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (atomic_dec_return(csdev->refcnt)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + /* Complain if we (somehow) got out of sync */
> + WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED);
Is there any conditions we can reach here? I see we always update
drvdata->mode within the mutex's protection.
> +
> + smb_disable_hw(drvdata);
> + smb_purge_data(drvdata);
> +
> + /* Dissociate from the target process. */
> + drvdata->pid = -1;
> + drvdata->mode = CS_MODE_DISABLED;
> +
> + dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n");
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static void *smb_alloc_buffer(struct coresight_device *csdev,
> + struct perf_event *event, void **pages,
> + int nr_pages, bool overwrite)
> +{
> + struct cs_buffers *buf;
> + int node;
> +
> + node = (event->cpu == -1) ? NUMA_NO_NODE : cpu_to_node(event->cpu);
> + buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
> + if (!buf)
> + return NULL;
> +
> + buf->snapshot = overwrite;
> + buf->nr_pages = nr_pages;
> + buf->data_pages = pages;
> + buf->pid = task_pid_nr(event->owner);
> +
> + return buf;
> +}
> +
> +static void smb_free_buffer(void *config)
> +{
> + struct cs_buffers *buf = config;
> +
> + kfree(buf);
> +}
> +
> +static void smb_sync_perf_buffer(struct smb_drv_data *drvdata,
> + struct cs_buffers *buf,
> + unsigned long head,
> + unsigned long data_size)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + char **dst_pages = (char **)buf->data_pages;
> + unsigned long to_copy;
> + long pg_idx, pg_offset;
> +
> + pg_idx = head >> PAGE_SHIFT;
> + pg_offset = head & (PAGE_SIZE - 1);
> +
> + while (data_size) {
> + unsigned long pg_space = PAGE_SIZE - pg_offset;
> +
> + /* Copy parts of trace data when read pointer wrap around */
> + if (sdb->rd_offset + pg_space > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> + else
> + to_copy = min(data_size, pg_space);
> +
> + memcpy(dst_pages[pg_idx] + pg_offset,
> + sdb->buf_base + sdb->rd_offset, to_copy);
> +
> + pg_offset += to_copy;
> + if (pg_offset >= PAGE_SIZE) {
> + pg_offset = 0;
> + pg_idx++;
> + pg_idx %= buf->nr_pages;
> + }
> + data_size -= to_copy;
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + }
> +
> + sdb->data_size = 0;
> + writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR_REG);
> +
> + /*
> + * Data remained in link cannot be purged when SMB is full, so
> + * synchronize the read pointer to write pointer, to make sure
> + * these remained data won't influence next trace.
> + */
> + if (sdb->full) {
> + smb_purge_data(drvdata);
> + writel(readl(drvdata->base + SMB_LB_WR_ADDR_REG),
> + drvdata->base + SMB_LB_RD_ADDR_REG);
> + }
> + smb_reset_buffer_status(drvdata);
> +}
> +
> +static unsigned long smb_update_buffer(struct coresight_device *csdev,
> + struct perf_output_handle *handle,
> + void *sink_config)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct cs_buffers *buf = sink_config;
> + unsigned long data_size = 0;
> + bool lost = false;
> +
> + if (!buf)
> + return 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + /* Don't do anything if another tracer is using this sink. */
> + if (atomic_read(csdev->refcnt) != 1)
> + goto out;
> +
> + smb_disable_hw(drvdata);
> + smb_update_data_size(drvdata);
> + data_size = sdb->data_size;
> +
> + /*
> + * The SMB buffer may be bigger than the space available in the
> + * perf ring buffer (handle->size). If so advance the offset so
> + * that we get the latest trace data.
> + */
> + if (data_size > handle->size) {
> + sdb->rd_offset += data_size - handle->size;
> + sdb->rd_offset %= sdb->buf_size;
> + data_size = handle->size;
> + lost = true;
> + }
> +
> + smb_sync_perf_buffer(drvdata, buf, handle->head, data_size);
> + if (!buf->snapshot && lost)
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
> +
> + smb_enable_hw(drvdata);
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return data_size;
> +}
> +
> +static const struct coresight_ops_sink smb_cs_ops = {
> + .enable = smb_enable,
> + .disable = smb_disable,
> + .alloc_buffer = smb_alloc_buffer,
> + .free_buffer = smb_free_buffer,
> + .update_buffer = smb_update_buffer,
> +};
> +
> +static const struct coresight_ops cs_ops = {
> + .sink_ops = &smb_cs_ops,
> +};
> +
> +static int smb_init_data_buffer(struct platform_device *pdev,
> + struct smb_data_buffer *sdb)
> +{
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, SMB_BUF_ADDR_RES);
> + if (IS_ERR(res)) {
> + dev_err(&pdev->dev, "SMB device failed to get resource\n");
> + return -EINVAL;
> + }
> +
> + sdb->start_addr = FIELD_PREP(SMB_BUF_ADDR_LO_MSK, res->start);
also FIELD_GET()?
> + sdb->buf_size = resource_size(res);
> + if (sdb->buf_size == 0)
> + return -EINVAL;
> +
> + /*
> + * This is a chunk of memory, use classic mapping with better
> + * performance.
> + */
> + base = devm_memremap(&pdev->dev, sdb->start_addr, sdb->buf_size,
> + MEMREMAP_WB);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + sdb->buf_base = base;
> +
> + return 0;
> +}
> +
> +static void smb_init_hw(struct smb_drv_data *drvdata)
> +{
> + /* First disable SMB and clear the status of SMB buffer */
> + smb_reset_buffer_status(drvdata);
> + smb_disable_hw(drvdata);
> + smb_purge_data(drvdata);
> +
> + writel(SMB_LB_CFG_LO_DEFAULT, drvdata->base + SMB_LB_CFG_LO_REG);
> + writel(SMB_LB_CFG_HI_DEFAULT, drvdata->base + SMB_LB_CFG_HI_REG);
> + writel(SMB_GLB_CFG_DEFAULT, drvdata->base + SMB_GLB_CFG_REG);
> + writel(SMB_GLB_INT_CFG, drvdata->base + SMB_GLB_INT_REG);
> + writel(SMB_LB_INT_CTRL_CFG, drvdata->base + SMB_LB_INT_CTRL_REG);
> +}
> +
> +static int smb_register_sink(struct platform_device *pdev,
> + struct smb_drv_data *drvdata)
> +{
> + struct coresight_platform_data *pdata = NULL;
> + struct coresight_desc desc = { 0 };
> + int ret;
> +
> + pdata = coresight_get_platform_data(&pdev->dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> +
> + desc.type = CORESIGHT_DEV_TYPE_SINK;
> + desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
> + desc.ops = &cs_ops;
> + desc.pdata = pdata;
> + desc.dev = &pdev->dev;
> + desc.groups = smb_sink_groups;
> + desc.name = coresight_alloc_device_name(&sink_devs, &pdev->dev);
> + if (!desc.name) {
> + dev_err(&pdev->dev, "Failed to alloc coresight device name");
> + return -ENOMEM;
> + }
> + desc.access = CSDEV_ACCESS_IOMEM(drvdata->base);
> +
> + drvdata->csdev = coresight_register(&desc);
> + if (IS_ERR(drvdata->csdev))
> + return PTR_ERR(drvdata->csdev);
> +
> + drvdata->miscdev.name = desc.name;
> + drvdata->miscdev.minor = MISC_DYNAMIC_MINOR;
> + drvdata->miscdev.fops = &smb_fops;
> + ret = misc_register(&drvdata->miscdev);
> + if (ret) {
> + coresight_unregister(drvdata->csdev);
> + dev_err(&pdev->dev, "Failed to register misc, ret=%d\n", ret);
> + }
> +
> + return ret;
> +}
> +
> +static void smb_unregister_sink(struct smb_drv_data *drvdata)
> +{
> + misc_deregister(&drvdata->miscdev);
> + coresight_unregister(drvdata->csdev);
> +}
> +
> +static int smb_config_inport(struct device *dev, bool enable)
> +{
> + u64 func = enable ? 1 : 0;
> + union acpi_object *obj;
> + guid_t guid;
> + u64 rev = 0;
> +
> + /*
> + * Using DSM calls to enable/disable ultrasoc hardwares on
> + * tracing path, to prevent ultrasoc packet format being exposed.
> + */
> + if (guid_parse(ULTRASOC_SMB_DSM_UUID, &guid)) {
> + dev_err(dev, "Get GUID failed\n");
> + return -EINVAL;
> + }
> +
> + obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, rev, func, NULL);
> + if (!obj)
> + dev_err(dev, "ACPI handle failed\n");
> + else
> + ACPI_FREE(obj);
> +
> + return 0;
> +}
> +
> +static int smb_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct smb_drv_data *drvdata;
> + int ret;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->base = devm_platform_ioremap_resource(pdev, SMB_REG_ADDR_RES);
> + if (IS_ERR(drvdata->base)) {
> + dev_err(dev, "Failed to ioremap resource\n");
> + return PTR_ERR(drvdata->base);
> + }
> +
> + ret = smb_init_data_buffer(pdev, &drvdata->sdb);
> + if (ret) {
> + dev_err(dev, "Failed to init buffer, ret = %d\n", ret);
> + return ret;
> + }
> +
> + smb_init_hw(drvdata);
> + mutex_init(&drvdata->mutex);
> + drvdata->pid = -1;
> +
> + ret = smb_register_sink(pdev, drvdata);
> + if (ret) {
> + dev_err(dev, "Failed to register SMB sink\n");
> + return ret;
> + }
> +
> + ret = smb_config_inport(dev, true);
> + if (ret) {
> + smb_unregister_sink(drvdata);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> +
> + return 0;
> +}
> +
> +static int smb_remove(struct platform_device *pdev)
> +{
> + struct smb_drv_data *drvdata = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = smb_config_inport(&pdev->dev, false);
> + if (ret)
> + return ret;
> +
> + smb_unregister_sink(drvdata);
> +
> + return 0;
> +}
> +
> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
> + {"HISI03A1", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
> +
> +static struct platform_driver smb_driver = {
> + .driver = {
> + .name = "ultrasoc-smb",
> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
> + .suppress_bind_attrs = true,
> + },
> + .probe = smb_probe,
> + .remove = smb_remove,
> +};
> +module_platform_driver(smb_driver);
> +
> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
> new file mode 100644
> index 000000000000..2e2f9f8fe54b
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#ifndef _ULTRASOC_SMB_H
> +#define _ULTRASOC_SMB_H
> +
> +#include <linux/miscdevice.h>
> +#include <linux/mutex.h>
> +
> +/* Offset of SMB global registers */
> +#define SMB_GLB_CFG_REG 0x00
> +#define SMB_GLB_EN_REG 0x04
> +#define SMB_GLB_INT_REG 0x08
> +
> +/* Offset of SMB logical buffer registers */
> +#define SMB_LB_CFG_LO_REG 0x40
> +#define SMB_LB_CFG_HI_REG 0x44
> +#define SMB_LB_INT_CTRL_REG 0x48
> +#define SMB_LB_INT_STS_REG 0x4c
> +#define SMB_LB_RD_ADDR_REG 0x5c
> +#define SMB_LB_WR_ADDR_REG 0x60
> +#define SMB_LB_PURGE_REG 0x64
> +
> +/* Set global config register */
> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
> +
> +/* Set global interrupt control register */
> +#define SMB_INT_EN BIT(0)
> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
> +
> +/* Set logical buffer config register lower 32 bits */
> +#define SMB_CFG_LO_EN BIT(0)
> +#define SMB_CFG_LO_SINGLE_END BIT(1)
> +#define SMB_CFG_LO_INIT BIT(8)
> +#define SMB_CFG_LO_CONT BIT(11)
> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
> +
> +/* Set logical buffer config register upper 32 bits */
> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
> +
> +/* Set logical buffer interrupt control register */
> +#define SMB_INT_CTRL_EN BIT(0)
> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
> +
> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
> +#define SMB_LB_PURGE_PURGED BIT(0)
> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
> +
> +#define SMB_REG_ADDR_RES 0
> +#define SMB_BUF_ADDR_RES 1
> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
> +
> +/**
> + * struct smb_data_buffer - Details of the buffer used by SMB
> + * @buf_base: Memory mapped base address of SMB.
> + * @start_addr: SMB buffer start Physical address.
> + * @buf_size: Size of the buffer.
> + * @data_size: Size of Trace data copy to userspace.
> + * @rd_offset: Offset of the read pointer in the buffer.
> + * @wr_offset: Offset of the write pointer in the buffer.
> + * @full: Trace data overflow.
> + */
> +struct smb_data_buffer {
> + void __iomem *buf_base;
The backend of buffer is a chunk of memory, so I guess we don't need
this __iomem here.
> + u32 start_addr;
Is u32 enough if we're running on a 64bit platform? You can use phys_addr_t
instead since you comment it to be "start Physical address".
> + unsigned long buf_size;
> + unsigned long data_size;
> + unsigned long rd_offset;
> + unsigned long wr_offset;
> + bool full;
> +};
> +
> +/**
> + * struct smb_drv_data - specifics associated to an SMB component
> + * @base: Memory mapped base address for SMB component.
> + * @csdev: Component vitals needed by the framework.
> + * @sdb: Data buffer for SMB.
> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
> + * @mutex: Control data access to one at a time.
> + * @reading: Synchronise user space access to SMB buffer.
> + * @pid: Process ID of the process being monitored by the
> + * session that is using this component.
> + * @mode: how this SMB is being used, perf mode or sysfs mode.
> + */
> +struct smb_drv_data {
> + void __iomem *base;
> + struct coresight_device *csdev;
> + struct smb_data_buffer sdb;
> + struct miscdevice miscdev;
> + struct mutex mutex;
> + local_t reading;
Why do we need to use local_t here? Considering the whole structure is
already protected by the mutex, maybe a boolean is enough?
Thanks.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-10 12:05 ` Yicong Yang
0 siblings, 0 replies; 30+ messages in thread
From: Yicong Yang @ 2022-11-10 12:05 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
Hi Junhao,
On 2022/11/9 21:50, Junhao He wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch adds driver for UltraSoc SMB(System Memory Buffer)
> device. SMB provides a way to buffer messages from ETM, and
> store these "CPU instructions trace" in system memory.
>
> SMB is developed by UltraSoc technology, which is acquired by
> Siemens, and we still use "UltraSoc" to name driver.
>
Some comments inline.
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> Tested-by: JunHao He <hejunhao3@huawei.com>
> ---
> drivers/hwtracing/coresight/Kconfig | 11 +
> drivers/hwtracing/coresight/Makefile | 1 +
> drivers/hwtracing/coresight/ultrasoc-smb.c | 635 +++++++++++++++++++++
> drivers/hwtracing/coresight/ultrasoc-smb.h | 116 ++++
> 4 files changed, 763 insertions(+)
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 45c1eb5dfcb7..cb17c207a728 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -201,4 +201,15 @@ config CORESIGHT_TRBE
>
> To compile this driver as a module, choose M here: the module will be
> called coresight-trbe.
> +
> +config ULTRASOC_SMB
> + tristate "Ultrasoc system memory buffer drivers"
> + depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
> + help
> + This driver provides support for the Ultrasoc system memory buffer (SMB).
> + SMB is responsible for receiving the trace data from Coresight ETM devices
> + and storing them to a system buffer.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called ultrasoc-smb.
> endif
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index b6c4a48140ec..344dba8d6ff8 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -27,3 +27,4 @@ obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
> coresight-cti-sysfs.o
> +obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
> new file mode 100644
> index 000000000000..ea2552a98d28
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
> @@ -0,0 +1,635 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/acpi.h>
> +#include <linux/circ_buf.h>
> +#include <linux/err.h>
> +#include <linux/fs.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "coresight-etm-perf.h"
> +#include "coresight-priv.h"
> +#include "ultrasoc-smb.h"
> +
> +DEFINE_CORESIGHT_DEVLIST(sink_devs, "ultra_smb");
> +
> +#define ULTRASOC_SMB_DSM_UUID "82ae1283-7f6a-4cbe-aa06-53e8fb24db18"
> +
> +static bool smb_buffer_is_empty(struct smb_drv_data *drvdata)
> +{
> + u32 buf_status = readl(drvdata->base + SMB_LB_INT_STS_REG);
> +
> + return !FIELD_PREP(SMB_LB_INT_STS_NOT_EMPTY_MSK, buf_status);
Should be FIELD_GET() here?
> +}
> +
> +static void smb_buffer_sync_status(struct smb_drv_data *drvdata)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> +
> + sdb->wr_offset = readl(drvdata->base + SMB_LB_WR_ADDR_REG) - sdb->start_addr;
> + sdb->rd_offset = readl(drvdata->base + SMB_LB_RD_ADDR_REG) - sdb->start_addr;
> + sdb->full = sdb->wr_offset == sdb->rd_offset && !smb_buffer_is_empty(drvdata);
Mistake here? Why to overwrite wr_offset?
> +}
> +
> +static void smb_reset_buffer_status(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_LB_INT_BUF_STS_RESET, drvdata->base + SMB_LB_INT_STS_REG);
You'll reset other fields of SMB_LB_INT_STS_REG since SMB_LB_INT_BUF_STS_RESET is only
BIT [3, 0], if it's not intended I'd suggest to only update the necessary fields. So is
other places.
> +}
> +
> +/* Purge data remaining in hardware path in case them influence next trace */
> +static void smb_purge_data(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_LB_PURGE_PURGED, drvdata->base + SMB_LB_PURGE_REG);
> +}
> +
> +static void smb_update_data_size(struct smb_drv_data *drvdata)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> +
> + smb_purge_data(drvdata);
> + smb_buffer_sync_status(drvdata);
> + if (sdb->full) {
> + sdb->data_size = sdb->buf_size;
> + return;
> + }
> +
> + sdb->data_size = CIRC_CNT(sdb->wr_offset, sdb->rd_offset, sdb->buf_size);
> +}
> +
> +static int smb_open(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (atomic_read(drvdata->csdev->refcnt)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + local_set(&drvdata->reading, 1);
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t smb_read(struct file *file, char __user *data, size_t len,
> + loff_t *ppos)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct device *dev = &drvdata->csdev->dev;
> + ssize_t to_copy = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (!sdb->data_size) {
> + smb_update_data_size(drvdata);
> + if (!sdb->data_size)
> + goto out;
> + }
> +
It'd be better to check this earlier in open().
> + to_copy = min(sdb->data_size, len);
> +
> + /* Copy parts of trace data when read pointer wrap around SMB buffer */
> + if (sdb->rd_offset + to_copy > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> +
> + if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
> + to_copy)) {
> + dev_dbg(dev, "Failed to copy data to user\n");
> + to_copy = -EFAULT;
> + goto out;
> + }
> +
> + *ppos += to_copy;
> + sdb->data_size -= to_copy;
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + writel(sdb->start_addr + sdb->rd_offset,
> + drvdata->base + SMB_LB_RD_ADDR_REG);
> + dev_dbg(dev, "%zu bytes copied\n", to_copy);
> +out:
> + if (!sdb->data_size)
> + smb_reset_buffer_status(drvdata);
> + mutex_unlock(&drvdata->mutex);
> +
> + return to_copy;
> +}
> +
> +static int smb_release(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> +
> + mutex_lock(&drvdata->mutex);
> + local_set(&drvdata->reading, 0);
> + mutex_unlock(&drvdata->mutex);
> +
> + return 0;
> +}
> +
> +static const struct file_operations smb_fops = {
> + .owner = THIS_MODULE,
> + .open = smb_open,
> + .read = smb_read,
> + .release = smb_release,
> + .llseek = no_llseek,
> +};
> +
> +static ssize_t buf_size_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(dev->parent);
> +
> + return sysfs_emit(buf, "0x%lx\n", drvdata->sdb.buf_size);
Need to update the data size before sysfs_emit().
> +}
> +static DEVICE_ATTR_RO(buf_size);
> +
> +static struct attribute *smb_sink_attrs[] = {
> + coresight_simple_reg32(read_pos, SMB_LB_RD_ADDR_REG),
> + coresight_simple_reg32(write_pos, SMB_LB_WR_ADDR_REG),
> + coresight_simple_reg32(buf_status, SMB_LB_INT_STS_REG),
> + &dev_attr_buf_size.attr,
> + NULL
> +};
> +
> +static const struct attribute_group smb_sink_group = {
> + .attrs = smb_sink_attrs,
> + .name = "mgmt",
> +};
> +
> +static const struct attribute_group *smb_sink_groups[] = {
> + &smb_sink_group,
> + NULL
> +};
> +
> +static void smb_enable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(SMB_GLB_EN_HW_ENABLE, drvdata->base + SMB_GLB_EN_REG);
> +}
> +
> +static void smb_disable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(0x0, drvdata->base + SMB_GLB_EN_REG);
> +}
> +
> +static void smb_enable_sysfs(struct coresight_device *csdev)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> +
> + if (drvdata->mode != CS_MODE_DISABLED)
> + return;
> +
> + smb_enable_hw(drvdata);
> + drvdata->mode = CS_MODE_SYSFS;
> +}
> +
> +static int smb_enable_perf(struct coresight_device *csdev, void *data)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + struct perf_output_handle *handle = data;
> + struct cs_buffers *buf = etm_perf_sink_config(handle);
> + pid_t pid;
> +
> + if (!buf)
> + return -EINVAL;
> +
> + /* Get a handle on the pid of the target process */
> + pid = buf->pid;
> +
> + /* Device is already in used by other session */
> + if (drvdata->pid != -1 && drvdata->pid != pid)
> + return -EBUSY;
> +
> + if (drvdata->pid == -1) {
> + smb_enable_hw(drvdata);
> + drvdata->pid = pid;
> + drvdata->mode = CS_MODE_PERF;
> + }
> +
> + return 0;
> +}
> +
> +static int smb_enable(struct coresight_device *csdev, u32 mode, void *data)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + /* Do nothing, the trace data is reading by other interface now */
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + /* Do nothing, the SMB is already enabled as other mode */
> + if (drvdata->mode != CS_MODE_DISABLED && drvdata->mode != mode) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + switch (mode) {
> + case CS_MODE_SYSFS:
> + smb_enable_sysfs(csdev);
> + break;
> + case CS_MODE_PERF:
> + ret = smb_enable_perf(csdev, data);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + if (ret)
> + goto out;
> +
> + atomic_inc(csdev->refcnt);
> +
> + dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n");
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static int smb_disable(struct coresight_device *csdev)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + int ret = 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + if (local_read(&drvdata->reading)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (atomic_dec_return(csdev->refcnt)) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + /* Complain if we (somehow) got out of sync */
> + WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED);
Is there any conditions we can reach here? I see we always update
drvdata->mode within the mutex's protection.
> +
> + smb_disable_hw(drvdata);
> + smb_purge_data(drvdata);
> +
> + /* Dissociate from the target process. */
> + drvdata->pid = -1;
> + drvdata->mode = CS_MODE_DISABLED;
> +
> + dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n");
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return ret;
> +}
> +
> +static void *smb_alloc_buffer(struct coresight_device *csdev,
> + struct perf_event *event, void **pages,
> + int nr_pages, bool overwrite)
> +{
> + struct cs_buffers *buf;
> + int node;
> +
> + node = (event->cpu == -1) ? NUMA_NO_NODE : cpu_to_node(event->cpu);
> + buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
> + if (!buf)
> + return NULL;
> +
> + buf->snapshot = overwrite;
> + buf->nr_pages = nr_pages;
> + buf->data_pages = pages;
> + buf->pid = task_pid_nr(event->owner);
> +
> + return buf;
> +}
> +
> +static void smb_free_buffer(void *config)
> +{
> + struct cs_buffers *buf = config;
> +
> + kfree(buf);
> +}
> +
> +static void smb_sync_perf_buffer(struct smb_drv_data *drvdata,
> + struct cs_buffers *buf,
> + unsigned long head,
> + unsigned long data_size)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + char **dst_pages = (char **)buf->data_pages;
> + unsigned long to_copy;
> + long pg_idx, pg_offset;
> +
> + pg_idx = head >> PAGE_SHIFT;
> + pg_offset = head & (PAGE_SIZE - 1);
> +
> + while (data_size) {
> + unsigned long pg_space = PAGE_SIZE - pg_offset;
> +
> + /* Copy parts of trace data when read pointer wrap around */
> + if (sdb->rd_offset + pg_space > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> + else
> + to_copy = min(data_size, pg_space);
> +
> + memcpy(dst_pages[pg_idx] + pg_offset,
> + sdb->buf_base + sdb->rd_offset, to_copy);
> +
> + pg_offset += to_copy;
> + if (pg_offset >= PAGE_SIZE) {
> + pg_offset = 0;
> + pg_idx++;
> + pg_idx %= buf->nr_pages;
> + }
> + data_size -= to_copy;
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + }
> +
> + sdb->data_size = 0;
> + writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR_REG);
> +
> + /*
> + * Data remained in link cannot be purged when SMB is full, so
> + * synchronize the read pointer to write pointer, to make sure
> + * these remained data won't influence next trace.
> + */
> + if (sdb->full) {
> + smb_purge_data(drvdata);
> + writel(readl(drvdata->base + SMB_LB_WR_ADDR_REG),
> + drvdata->base + SMB_LB_RD_ADDR_REG);
> + }
> + smb_reset_buffer_status(drvdata);
> +}
> +
> +static unsigned long smb_update_buffer(struct coresight_device *csdev,
> + struct perf_output_handle *handle,
> + void *sink_config)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct cs_buffers *buf = sink_config;
> + unsigned long data_size = 0;
> + bool lost = false;
> +
> + if (!buf)
> + return 0;
> +
> + mutex_lock(&drvdata->mutex);
> +
> + /* Don't do anything if another tracer is using this sink. */
> + if (atomic_read(csdev->refcnt) != 1)
> + goto out;
> +
> + smb_disable_hw(drvdata);
> + smb_update_data_size(drvdata);
> + data_size = sdb->data_size;
> +
> + /*
> + * The SMB buffer may be bigger than the space available in the
> + * perf ring buffer (handle->size). If so advance the offset so
> + * that we get the latest trace data.
> + */
> + if (data_size > handle->size) {
> + sdb->rd_offset += data_size - handle->size;
> + sdb->rd_offset %= sdb->buf_size;
> + data_size = handle->size;
> + lost = true;
> + }
> +
> + smb_sync_perf_buffer(drvdata, buf, handle->head, data_size);
> + if (!buf->snapshot && lost)
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
> +
> + smb_enable_hw(drvdata);
> +out:
> + mutex_unlock(&drvdata->mutex);
> +
> + return data_size;
> +}
> +
> +static const struct coresight_ops_sink smb_cs_ops = {
> + .enable = smb_enable,
> + .disable = smb_disable,
> + .alloc_buffer = smb_alloc_buffer,
> + .free_buffer = smb_free_buffer,
> + .update_buffer = smb_update_buffer,
> +};
> +
> +static const struct coresight_ops cs_ops = {
> + .sink_ops = &smb_cs_ops,
> +};
> +
> +static int smb_init_data_buffer(struct platform_device *pdev,
> + struct smb_data_buffer *sdb)
> +{
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, SMB_BUF_ADDR_RES);
> + if (IS_ERR(res)) {
> + dev_err(&pdev->dev, "SMB device failed to get resource\n");
> + return -EINVAL;
> + }
> +
> + sdb->start_addr = FIELD_PREP(SMB_BUF_ADDR_LO_MSK, res->start);
also FIELD_GET()?
> + sdb->buf_size = resource_size(res);
> + if (sdb->buf_size == 0)
> + return -EINVAL;
> +
> + /*
> + * This is a chunk of memory, use classic mapping with better
> + * performance.
> + */
> + base = devm_memremap(&pdev->dev, sdb->start_addr, sdb->buf_size,
> + MEMREMAP_WB);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + sdb->buf_base = base;
> +
> + return 0;
> +}
> +
> +static void smb_init_hw(struct smb_drv_data *drvdata)
> +{
> + /* First disable SMB and clear the status of SMB buffer */
> + smb_reset_buffer_status(drvdata);
> + smb_disable_hw(drvdata);
> + smb_purge_data(drvdata);
> +
> + writel(SMB_LB_CFG_LO_DEFAULT, drvdata->base + SMB_LB_CFG_LO_REG);
> + writel(SMB_LB_CFG_HI_DEFAULT, drvdata->base + SMB_LB_CFG_HI_REG);
> + writel(SMB_GLB_CFG_DEFAULT, drvdata->base + SMB_GLB_CFG_REG);
> + writel(SMB_GLB_INT_CFG, drvdata->base + SMB_GLB_INT_REG);
> + writel(SMB_LB_INT_CTRL_CFG, drvdata->base + SMB_LB_INT_CTRL_REG);
> +}
> +
> +static int smb_register_sink(struct platform_device *pdev,
> + struct smb_drv_data *drvdata)
> +{
> + struct coresight_platform_data *pdata = NULL;
> + struct coresight_desc desc = { 0 };
> + int ret;
> +
> + pdata = coresight_get_platform_data(&pdev->dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> +
> + desc.type = CORESIGHT_DEV_TYPE_SINK;
> + desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
> + desc.ops = &cs_ops;
> + desc.pdata = pdata;
> + desc.dev = &pdev->dev;
> + desc.groups = smb_sink_groups;
> + desc.name = coresight_alloc_device_name(&sink_devs, &pdev->dev);
> + if (!desc.name) {
> + dev_err(&pdev->dev, "Failed to alloc coresight device name");
> + return -ENOMEM;
> + }
> + desc.access = CSDEV_ACCESS_IOMEM(drvdata->base);
> +
> + drvdata->csdev = coresight_register(&desc);
> + if (IS_ERR(drvdata->csdev))
> + return PTR_ERR(drvdata->csdev);
> +
> + drvdata->miscdev.name = desc.name;
> + drvdata->miscdev.minor = MISC_DYNAMIC_MINOR;
> + drvdata->miscdev.fops = &smb_fops;
> + ret = misc_register(&drvdata->miscdev);
> + if (ret) {
> + coresight_unregister(drvdata->csdev);
> + dev_err(&pdev->dev, "Failed to register misc, ret=%d\n", ret);
> + }
> +
> + return ret;
> +}
> +
> +static void smb_unregister_sink(struct smb_drv_data *drvdata)
> +{
> + misc_deregister(&drvdata->miscdev);
> + coresight_unregister(drvdata->csdev);
> +}
> +
> +static int smb_config_inport(struct device *dev, bool enable)
> +{
> + u64 func = enable ? 1 : 0;
> + union acpi_object *obj;
> + guid_t guid;
> + u64 rev = 0;
> +
> + /*
> + * Using DSM calls to enable/disable ultrasoc hardwares on
> + * tracing path, to prevent ultrasoc packet format being exposed.
> + */
> + if (guid_parse(ULTRASOC_SMB_DSM_UUID, &guid)) {
> + dev_err(dev, "Get GUID failed\n");
> + return -EINVAL;
> + }
> +
> + obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, rev, func, NULL);
> + if (!obj)
> + dev_err(dev, "ACPI handle failed\n");
> + else
> + ACPI_FREE(obj);
> +
> + return 0;
> +}
> +
> +static int smb_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct smb_drv_data *drvdata;
> + int ret;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->base = devm_platform_ioremap_resource(pdev, SMB_REG_ADDR_RES);
> + if (IS_ERR(drvdata->base)) {
> + dev_err(dev, "Failed to ioremap resource\n");
> + return PTR_ERR(drvdata->base);
> + }
> +
> + ret = smb_init_data_buffer(pdev, &drvdata->sdb);
> + if (ret) {
> + dev_err(dev, "Failed to init buffer, ret = %d\n", ret);
> + return ret;
> + }
> +
> + smb_init_hw(drvdata);
> + mutex_init(&drvdata->mutex);
> + drvdata->pid = -1;
> +
> + ret = smb_register_sink(pdev, drvdata);
> + if (ret) {
> + dev_err(dev, "Failed to register SMB sink\n");
> + return ret;
> + }
> +
> + ret = smb_config_inport(dev, true);
> + if (ret) {
> + smb_unregister_sink(drvdata);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> +
> + return 0;
> +}
> +
> +static int smb_remove(struct platform_device *pdev)
> +{
> + struct smb_drv_data *drvdata = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = smb_config_inport(&pdev->dev, false);
> + if (ret)
> + return ret;
> +
> + smb_unregister_sink(drvdata);
> +
> + return 0;
> +}
> +
> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
> + {"HISI03A1", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
> +
> +static struct platform_driver smb_driver = {
> + .driver = {
> + .name = "ultrasoc-smb",
> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
> + .suppress_bind_attrs = true,
> + },
> + .probe = smb_probe,
> + .remove = smb_remove,
> +};
> +module_platform_driver(smb_driver);
> +
> +MODULE_DESCRIPTION("UltraSoc SMB CoreSight driver");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen@huawei.com>");
> +MODULE_AUTHOR("Qi Liu <liuqi115@huawei.com>");
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
> new file mode 100644
> index 000000000000..2e2f9f8fe54b
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
> @@ -0,0 +1,116 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#ifndef _ULTRASOC_SMB_H
> +#define _ULTRASOC_SMB_H
> +
> +#include <linux/miscdevice.h>
> +#include <linux/mutex.h>
> +
> +/* Offset of SMB global registers */
> +#define SMB_GLB_CFG_REG 0x00
> +#define SMB_GLB_EN_REG 0x04
> +#define SMB_GLB_INT_REG 0x08
> +
> +/* Offset of SMB logical buffer registers */
> +#define SMB_LB_CFG_LO_REG 0x40
> +#define SMB_LB_CFG_HI_REG 0x44
> +#define SMB_LB_INT_CTRL_REG 0x48
> +#define SMB_LB_INT_STS_REG 0x4c
> +#define SMB_LB_RD_ADDR_REG 0x5c
> +#define SMB_LB_WR_ADDR_REG 0x60
> +#define SMB_LB_PURGE_REG 0x64
> +
> +/* Set global config register */
> +#define SMB_CFG_BURST_LEN_MSK GENMASK(11, 4)
> +#define SMB_CFG_IDLE_PRD_MSK GENMASK(15, 12)
> +#define SMB_CFG_MEM_WR_MSK GENMASK(21, 16)
> +#define SMB_CFG_MEM_RD_MSK GENMASK(27, 22)
> +#define SMB_GLB_CFG_DEFAULT (FIELD_PREP(SMB_CFG_BURST_LEN_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_IDLE_PRD_MSK, 0xf) | \
> + FIELD_PREP(SMB_CFG_MEM_WR_MSK, 0x3) | \
> + FIELD_PREP(SMB_CFG_MEM_RD_MSK, 0x1b))
> +
> +/* Set global interrupt control register */
> +#define SMB_INT_EN BIT(0)
> +#define SMB_INT_PULSE BIT(1) /* Interrupt type: 1 - Pulse */
> +#define SMB_INT_ACT_H BIT(2) /* Interrupt polarity: 1 - Active high */
> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_PULSE | SMB_INT_ACT_H)
> +
> +/* Set logical buffer config register lower 32 bits */
> +#define SMB_CFG_LO_EN BIT(0)
> +#define SMB_CFG_LO_SINGLE_END BIT(1)
> +#define SMB_CFG_LO_INIT BIT(8)
> +#define SMB_CFG_LO_CONT BIT(11)
> +#define SMB_CFG_LO_FLOW_MSK GENMASK(19, 16)
> +#define SMB_LB_CFG_LO_DEFAULT (SMB_CFG_LO_EN | SMB_CFG_LO_SINGLE_END | \
> + SMB_CFG_LO_INIT | SMB_CFG_LO_CONT | \
> + FIELD_PREP(SMB_CFG_LO_FLOW_MSK, 0xf))
> +
> +/* Set logical buffer config register upper 32 bits */
> +#define SMB_CFG_HI_RANGE_UP_MSK GENMASK(15, 8)
> +#define SMB_LB_CFG_HI_DEFAULT FIELD_PREP(SMB_CFG_HI_RANGE_UP_MSK, 0xff)
> +
> +/* Set logical buffer interrupt control register */
> +#define SMB_INT_CTRL_EN BIT(0)
> +#define SMB_INT_CTRL_BUF_NOTE_MSK GENMASK(11, 8)
> +#define SMB_LB_INT_CTRL_CFG (SMB_INT_CTRL_EN | \
> + FIELD_PREP(SMB_INT_CTRL_BUF_NOTE_MSK, 0xf))
> +
> +#define SMB_LB_INT_STS_NOT_EMPTY_MSK BIT(0)
> +#define SMB_LB_STS_RESET_MSK GENMASK(3, 0)
> +#define SMB_LB_INT_BUF_STS_RESET FIELD_PREP(SMB_LB_STS_RESET_MSK, 0xf)
> +#define SMB_LB_PURGE_PURGED BIT(0)
> +#define SMB_GLB_EN_HW_ENABLE BIT(0)
> +
> +#define SMB_REG_ADDR_RES 0
> +#define SMB_BUF_ADDR_RES 1
> +#define SMB_BUF_ADDR_LO_MSK GENMASK(31, 0)
> +
> +/**
> + * struct smb_data_buffer - Details of the buffer used by SMB
> + * @buf_base: Memory mapped base address of SMB.
> + * @start_addr: SMB buffer start Physical address.
> + * @buf_size: Size of the buffer.
> + * @data_size: Size of Trace data copy to userspace.
> + * @rd_offset: Offset of the read pointer in the buffer.
> + * @wr_offset: Offset of the write pointer in the buffer.
> + * @full: Trace data overflow.
> + */
> +struct smb_data_buffer {
> + void __iomem *buf_base;
The backend of buffer is a chunk of memory, so I guess we don't need
this __iomem here.
> + u32 start_addr;
Is u32 enough if we're running on a 64bit platform? You can use phys_addr_t
instead since you comment it to be "start Physical address".
> + unsigned long buf_size;
> + unsigned long data_size;
> + unsigned long rd_offset;
> + unsigned long wr_offset;
> + bool full;
> +};
> +
> +/**
> + * struct smb_drv_data - specifics associated to an SMB component
> + * @base: Memory mapped base address for SMB component.
> + * @csdev: Component vitals needed by the framework.
> + * @sdb: Data buffer for SMB.
> + * @miscdev: Specifics to handle "/dev/xyz.smb" entry.
> + * @mutex: Control data access to one at a time.
> + * @reading: Synchronise user space access to SMB buffer.
> + * @pid: Process ID of the process being monitored by the
> + * session that is using this component.
> + * @mode: how this SMB is being used, perf mode or sysfs mode.
> + */
> +struct smb_drv_data {
> + void __iomem *base;
> + struct coresight_device *csdev;
> + struct smb_data_buffer sdb;
> + struct miscdevice miscdev;
> + struct mutex mutex;
> + local_t reading;
Why do we need to use local_t here? Considering the whole structure is
already protected by the mutex, maybe a boolean is enough?
Thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
2022-11-09 13:50 ` Junhao He
@ 2022-11-10 12:08 ` Yicong Yang
-1 siblings, 0 replies; 30+ messages in thread
From: Yicong Yang @ 2022-11-10 12:08 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/9 21:50, Junhao He wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <liuqi115@huawei.com>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
btw, you need to cc linux-doc@vger.kernel.org.
Thanks.
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
@ 2022-11-10 12:08 ` Yicong Yang
0 siblings, 0 replies; 30+ messages in thread
From: Yicong Yang @ 2022-11-10 12:08 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/9 21:50, Junhao He wrote:
> From: Qi Liu <liuqi115@huawei.com>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <liuqi115@huawei.com>
> Signed-off-by: Junhao He <hejunhao3@huawei.com>
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <hejunhao3@huawei.com>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <liuqi115@huawei.com>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
btw, you need to cc linux-doc@vger.kernel.org.
Thanks.
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 13:50 ` Junhao He
` (2 preceding siblings ...)
(?)
@ 2022-11-11 13:30 ` kernel test robot
-1 siblings, 0 replies; 30+ messages in thread
From: kernel test robot @ 2022-11-11 13:30 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng,
hejunhao3
[-- Attachment #1: Type: text/plain, Size: 3236 bytes --]
Hi Junhao,
I love your patch! Perhaps something to improve:
[auto build test WARNING on soc/for-next]
[also build test WARNING on linus/master v6.1-rc4 next-20221111]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
patch link: https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
config: arm64-randconfig-r023-20221111
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
git checkout 49ede03fd874b65deca5382ea84c3377188136da
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/hwtracing/coresight/ultrasoc-smb.c: In function 'smb_config_inport':
>> drivers/hwtracing/coresight/ultrasoc-smb.c:553:31: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
553 | ACPI_FREE(obj);
| ^
drivers/hwtracing/coresight/ultrasoc-smb.c: At top level:
drivers/hwtracing/coresight/ultrasoc-smb.c:615:36: warning: 'ultrasoc_smb_acpi_match' defined but not used [-Wunused-const-variable=]
615 | static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~
vim +/else +553 drivers/hwtracing/coresight/ultrasoc-smb.c
532
533 static int smb_config_inport(struct device *dev, bool enable)
534 {
535 u64 func = enable ? 1 : 0;
536 union acpi_object *obj;
537 guid_t guid;
538 u64 rev = 0;
539
540 /*
541 * Using DSM calls to enable/disable ultrasoc hardwares on
542 * tracing path, to prevent ultrasoc packet format being exposed.
543 */
544 if (guid_parse(ULTRASOC_SMB_DSM_UUID, &guid)) {
545 dev_err(dev, "Get GUID failed\n");
546 return -EINVAL;
547 }
548
549 obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, rev, func, NULL);
550 if (!obj)
551 dev_err(dev, "ACPI handle failed\n");
552 else
> 553 ACPI_FREE(obj);
554
555 return 0;
556 }
557
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 169336 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.1.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="aarch64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
# CONFIG_TIME_KUNIT_TEST is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM64=y
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=16
CONFIG_ARM64_CONT_PTE_SHIFT=5
CONFIG_ARM64_CONT_PMD_SHIFT=5
CONFIG_ARCH_MMAP_RND_BITS_MIN=14
CONFIG_ARCH_MMAP_RND_BITS_MAX=27
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=7
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NO_IOPORT_MAP=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
#
# Platform selection
#
# CONFIG_ARCH_ACTIONS is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_ALPINE is not set
CONFIG_ARCH_APPLE=y
# CONFIG_ARCH_BCM is not set
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BITMAIN=y
CONFIG_ARCH_EXYNOS=y
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_K3 is not set
CONFIG_ARCH_LG1K=y
# CONFIG_ARCH_HISI is not set
CONFIG_ARCH_KEEMBAY=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
# CONFIG_ARCH_NXP is not set
CONFIG_ARCH_NPCM=y
# CONFIG_ARCH_QCOM is not set
CONFIG_ARCH_REALTEK=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_INTEL_SOCFPGA=y
CONFIG_ARCH_SYNQUACER=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_TESLA_FSD is not set
# CONFIG_ARCH_SPRD is not set
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
# CONFIG_ARCH_UNIPHIER is not set
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_VISCONTI is not set
# CONFIG_ARCH_XGENE is not set
# CONFIG_ARCH_ZYNQMP is not set
# end of Platform selection
#
# Kernel Features
#
#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
# CONFIG_ARM64_ERRATUM_826319 is not set
# CONFIG_ARM64_ERRATUM_827319 is not set
# CONFIG_ARM64_ERRATUM_824069 is not set
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
# CONFIG_ARM64_ERRATUM_1024718 is not set
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
# CONFIG_ARM64_ERRATUM_1165522 is not set
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
# CONFIG_ARM64_ERRATUM_2441007 is not set
CONFIG_ARM64_ERRATUM_1286807=y
# CONFIG_ARM64_ERRATUM_1463225 is not set
# CONFIG_ARM64_ERRATUM_1542419 is not set
CONFIG_ARM64_ERRATUM_1508412=y
CONFIG_ARM64_ERRATUM_2051678=y
CONFIG_ARM64_ERRATUM_2077057=y
CONFIG_ARM64_ERRATUM_2658417=y
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
# CONFIG_ARM64_ERRATUM_2054223 is not set
CONFIG_ARM64_ERRATUM_2067961=y
# CONFIG_ARM64_ERRATUM_2441009 is not set
# CONFIG_ARM64_ERRATUM_2457168 is not set
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
# CONFIG_CAVIUM_ERRATUM_30115 is not set
CONFIG_CAVIUM_TX2_ERRATUM_219=y
# CONFIG_FUJITSU_ERRATUM_010001 is not set
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
# CONFIG_NVIDIA_CARMEL_CNP_ERRATUM is not set
# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
# end of ARM errata workarounds via the alternatives framework
# CONFIG_ARM64_4K_PAGES is not set
# CONFIG_ARM64_16K_PAGES is not set
CONFIG_ARM64_64K_PAGES=y
CONFIG_ARM64_VA_BITS_42=y
# CONFIG_ARM64_VA_BITS_48 is not set
CONFIG_ARM64_VA_BITS=42
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SCHED_MC=y
# CONFIG_SCHED_CLUSTER is not set
# CONFIG_SCHED_SMT is not set
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
# CONFIG_NUMA is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
#
# Support for PE file signature verification disabled
#
# CONFIG_CRASH_DUMP is not set
CONFIG_TRANS_TABLE=y
# CONFIG_XEN is not set
CONFIG_ARCH_FORCE_MAX_ORDER=14
CONFIG_UNMAP_KERNEL_AT_EL0=y
# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
CONFIG_ARM64_SW_TTBR0_PAN=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
# CONFIG_COMPAT is not set
#
# ARMv8.1 architectural features
#
# CONFIG_ARM64_HW_AFDBM is not set
# CONFIG_ARM64_PAN is not set
CONFIG_AS_HAS_LDAPR=y
CONFIG_AS_HAS_LSE_ATOMICS=y
# CONFIG_ARM64_USE_LSE_ATOMICS is not set
# end of ARMv8.1 architectural features
#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
CONFIG_ARM64_PMEM=y
# CONFIG_ARM64_RAS_EXTN is not set
# end of ARMv8.2 architectural features
#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_PAC=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features
#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
# CONFIG_ARM64_TLB_RANGE is not set
# end of ARMv8.4 architectural features
#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARM64_AS_HAS_MTE=y
# end of ARMv8.5 architectural features
#
# ARMv8.7 architectural features
#
# end of ARMv8.7 architectural features
# CONFIG_ARM64_SVE is not set
# CONFIG_ARM64_PSEUDO_NMI is not set
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
CONFIG_ARCH_NR_GPIO=2048
# end of Kernel Features
#
# Boot options
#
CONFIG_CMDLINE=""
# end of Boot options
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_USERSPACE_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_PSCI_CPUIDLE is not set
CONFIG_ARM_CLPS711X_CPUIDLE=y
# end of ARM CPU Idle Drivers
# end of CPU Idle
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=y
CONFIG_ARM_MEDIATEK_CPUFREQ=y
# CONFIG_ARM_MEDIATEK_CPUFREQ_HW is not set
CONFIG_ARM_QCOM_CPUFREQ_HW=y
CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
# CONFIG_ARM_SCMI_CPUFREQ is not set
CONFIG_QORIQ_CPUFREQ=y
# end of CPU Frequency scaling
# end of CPU Power Management
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_SHADOW_CALL_STACK=y
CONFIG_SHADOW_CALL_STACK=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=14
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_RELR=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_CGROUP_IOLATENCY=y
# CONFIG_BLK_CGROUP_FC_APPID is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF_KUNIT_TEST is not set
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
# CONFIG_ZONE_DMA is not set
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_LRU_GEN_STATS=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
# CONFIG_DAMON_VADDR_KUNIT_TEST is not set
CONFIG_DAMON_SYSFS=y
# CONFIG_DAMON_DBGFS is not set
# CONFIG_DAMON_RECLAIM is not set
# CONFIG_DAMON_LRU_SORT is not set
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
#
# PC-card bridges
#
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_CACHE is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_PM_QOS_KUNIT_TEST is not set
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
CONFIG_BRCMSTB_GISB_ARB=y
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUNXI_RSB=y
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_FSL_MC_BUS=y
# CONFIG_FSL_MC_UAPI_SUPPORT is not set
# CONFIG_MHI_BUS is not set
CONFIG_MHI_BUS_EP=y
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_INTEL_STRATIX10_SERVICE is not set
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
# CONFIG_ARM_FFA_TRANSPORT is not set
CONFIG_BCM47XX_NVRAM=y
# CONFIG_BCM47XX_SPROM is not set
# CONFIG_TEE_BNXT_FW is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_ARM_PSCI_FW=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
# CONFIG_GNSS_MTK_SERIAL is not set
# CONFIG_GNSS_SIRF_SERIAL is not set
CONFIG_GNSS_UBX_SERIAL=y
# CONFIG_GNSS_USB is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
# CONFIG_NVME_TARGET_FC is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_QCOM_COINCELL is not set
CONFIG_QCOM_FASTRPC=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
CONFIG_ECHO=y
CONFIG_MISC_RTSX_USB=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_CLPS711X=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_SNVS_PWRKEY=y
# CONFIG_KEYBOARD_IMX is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_PINEPHONE is not set
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MT6779=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_BYD is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_FOCALTECH is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADC=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_ATMEL is not set
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
# CONFIG_SERIAL_CLPS711X is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
# CONFIG_SERIAL_IMX_CONSOLE is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=18
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_HS_LPC32XX=y
CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MSM=y
# CONFIG_SERIAL_MSM_CONSOLE is not set
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=y
# CONFIG_SERIAL_OMAP_CONSOLE is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_QE is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OWL=y
# CONFIG_SERIAL_OWL_CONSOLE is not set
CONFIG_SERIAL_RDA=y
# CONFIG_SERIAL_RDA_CONSOLE is not set
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_NULL_TTY=y
# CONFIG_HVC_DCC is not set
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
# CONFIG_IPMI_KCS_BMC_SERIO is not set
CONFIG_ASPEED_BT_IPMI_BMC=y
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
CONFIG_HW_RANDOM_BA431=y
# CONFIG_HW_RANDOM_BCM2835 is not set
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_IMX_RNGC=y
# CONFIG_HW_RANDOM_NOMADIK is not set
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_MESON=y
# CONFIG_HW_RANDOM_MTK is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_HW_RANDOM_NPCM is not set
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
# CONFIG_SCR24X is not set
# end of PCMCIA character devices
# CONFIG_DEVMEM is not set
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_TCG_TIS_CORE=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_VTPM_PROXY=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
# CONFIG_I2C_ASPEED is not set
CONFIG_I2C_AT91=y
# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
CONFIG_I2C_AXXIA=y
# CONFIG_I2C_BCM2835 is not set
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DAVINCI=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DIGICOLOR=y
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
CONFIG_I2C_HISI=y
# CONFIG_I2C_IMG is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_IMX_LPI2C is not set
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
# CONFIG_I2C_KEMPLD is not set
# CONFIG_I2C_LPC2K is not set
CONFIG_I2C_MESON=y
CONFIG_I2C_MICROCHIP_CORE=y
CONFIG_I2C_MT65XX=y
# CONFIG_I2C_MT7621 is not set
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
# CONFIG_I2C_NOMADIK is not set
CONFIG_I2C_NPCM=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_SPRD=y
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SVC_I3C_MASTER is not set
# CONFIG_MIPI_I3C_HCI is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_APPLE_GPIO=y
CONFIG_PINCTRL_AT91PIO4=y
# CONFIG_PINCTRL_AXP209 is not set
CONFIG_PINCTRL_BM1880=y
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_DA850_PUPD=y
# CONFIG_PINCTRL_DA9062 is not set
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_INGENIC=y
# CONFIG_PINCTRL_KEEMBAY is not set
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=y
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_THUNDERBAY=y
CONFIG_PINCTRL_OWL=y
# CONFIG_PINCTRL_S500 is not set
# CONFIG_PINCTRL_S700 is not set
# CONFIG_PINCTRL_S900 is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
# CONFIG_PINCTRL_BCM4908 is not set
CONFIG_PINCTRL_BCM63XX=y
# CONFIG_PINCTRL_BCM6318 is not set
CONFIG_PINCTRL_BCM6328=y
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
# CONFIG_PINCTRL_IMX8MP is not set
# CONFIG_PINCTRL_IMX8MQ is not set
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
# CONFIG_PINCTRL_MT7623 is not set
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
CONFIG_PINCTRL_MT6779=y
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
CONFIG_PINCTRL_MT8188=y
# CONFIG_PINCTRL_MT8192 is not set
CONFIG_PINCTRL_MT8195=y
# CONFIG_PINCTRL_MT8365 is not set
CONFIG_PINCTRL_MT8516=y
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
# CONFIG_PINCTRL_MESON_GXL is not set
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
# CONFIG_PINCTRL_MESON_G12A is not set
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
CONFIG_PINCTRL_PXA=y
# CONFIG_PINCTRL_PXA25X is not set
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ4019=y
# CONFIG_PINCTRL_IPQ8064 is not set
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
# CONFIG_PINCTRL_MSM8660 is not set
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PINCTRL_MSM8909 is not set
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
# CONFIG_PINCTRL_MSM8976 is not set
CONFIG_PINCTRL_MSM8994=y
# CONFIG_PINCTRL_MSM8996 is not set
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
# CONFIG_PINCTRL_SC8180X is not set
# CONFIG_PINCTRL_SC8280XP is not set
# CONFIG_PINCTRL_SDM660 is not set
CONFIG_PINCTRL_SDM845=y
# CONFIG_PINCTRL_SDX55 is not set
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
# CONFIG_PINCTRL_SDX65 is not set
# CONFIG_PINCTRL_SM8150 is not set
CONFIG_PINCTRL_SM8250=y
# CONFIG_PINCTRL_SM8250_LPASS_LPI is not set
# CONFIG_PINCTRL_SM8350 is not set
CONFIG_PINCTRL_SM8450=y
# CONFIG_PINCTRL_SM8450_LPASS_LPI is not set
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=y
CONFIG_PINCTRL_LPASS_LPI=y
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
# CONFIG_PINCTRL_PFC_R8A77970 is not set
CONFIG_PINCTRL_PFC_R8A779A0=y
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
CONFIG_PINCTRL_RZA1=y
# CONFIG_PINCTRL_RZA2 is not set
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
# CONFIG_PINCTRL_PFC_SH7203 is not set
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
# CONFIG_PINCTRL_PFC_SH7757 is not set
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
# CONFIG_PINCTRL_PFC_SH73A0 is not set
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STARFIVE_JH7100=y
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_SUNXI=y
# CONFIG_PINCTRL_SUN4I_A10 is not set
CONFIG_PINCTRL_SUN5I=y
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN6I_A31_R is not set
CONFIG_PINCTRL_SUN8I_A23=y
# CONFIG_PINCTRL_SUN8I_A33 is not set
CONFIG_PINCTRL_SUN8I_A83T=y
# CONFIG_PINCTRL_SUN8I_A83T_R is not set
# CONFIG_PINCTRL_SUN8I_A23_R is not set
CONFIG_PINCTRL_SUN8I_H3=y
# CONFIG_PINCTRL_SUN8I_H3_R is not set
# CONFIG_PINCTRL_SUN8I_V3S is not set
# CONFIG_PINCTRL_SUN9I_A80 is not set
CONFIG_PINCTRL_SUN9I_A80_R=y
CONFIG_PINCTRL_SUN20I_D1=y
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
# CONFIG_PINCTRL_SUN50I_A100 is not set
# CONFIG_PINCTRL_SUN50I_A100_R is not set
CONFIG_PINCTRL_SUN50I_H5=y
# CONFIG_PINCTRL_SUN50I_H6 is not set
# CONFIG_PINCTRL_SUN50I_H6_R is not set
CONFIG_PINCTRL_SUN50I_H616=y
CONFIG_PINCTRL_SUN50I_H616_R=y
CONFIG_PINCTRL_TI_IODELAY=y
# CONFIG_PINCTRL_UNIPHIER is not set
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
CONFIG_GPIO_ASPEED_SGPIO=y
# CONFIG_GPIO_ATH79 is not set
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_BCM_KONA is not set
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
CONFIG_GPIO_LPC32XX=y
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SNPS_CREG is not set
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_WCD934X=y
# CONFIG_GPIO_XGENE is not set
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_AMD_FCH is not set
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
# CONFIG_GPIO_MADERA is not set
# CONFIG_GPIO_MAX77620 is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65912=y
# end of MFD GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_BRCMKONA=y
# CONFIG_POWER_RESET_BRCMSTB is not set
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MT6323=y
# CONFIG_POWER_RESET_REGULATOR is not set
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_TPS65086 is not set
# CONFIG_POWER_RESET_XGENE is not set
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_POWER_RESET_RMOBILE is not set
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=y
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_TEST_POWER=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_SAMSUNG_SDI=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
# CONFIG_AXP20X_POWER is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
# CONFIG_CHARGER_MAX14577 is not set
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MT6360=y
# CONFIG_CHARGER_MT6370 is not set
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65217=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_SC2731=y
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
# CONFIG_BATTERY_ACER_A500 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_BT1_PVT=y
# CONFIG_SENSORS_BT1_PVT_ALARMS is not set
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_SPARX5 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX31760=y
CONFIG_SENSORS_MAX6620=y
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_NCT6775_I2C=y
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_NSA320=y
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
CONFIG_SENSORS_NZXT_SMART2=y
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
# CONFIG_SENSORS_PECI_DIMMTEMP is not set
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
# CONFIG_SENSORS_IR36021 is not set
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=y
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LM25066_REGULATOR is not set
CONFIG_SENSORS_LT7182S=y
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=y
# CONFIG_SENSORS_MAX15301 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX16601 is not set
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
# CONFIG_SENSORS_MAX31785 is not set
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
# CONFIG_SENSORS_Q54SJ108A2 is not set
CONFIG_SENSORS_STPDDC60=y
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_TPS546D24=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
# CONFIG_SENSORS_SBTSI is not set
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83773G=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=y
# CONFIG_MAX77620_THERMAL is not set
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
CONFIG_RZG2L_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y
CONFIG_AMLOGIC_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BRCMSTB_THERMAL=y
# CONFIG_BCM_NS_THERMAL is not set
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
# CONFIG_TI_THERMAL is not set
# CONFIG_OMAP3_THERMAL is not set
# CONFIG_OMAP4_THERMAL is not set
CONFIG_OMAP5_THERMAL=y
# CONFIG_DRA752_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_TSENS is not set
CONFIG_QCOM_SPMI_ADC_TM5=y
CONFIG_QCOM_SPMI_TEMP_ALARM=y
# end of Qualcomm thermal drivers
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_HOST_SOC is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_SUN4I_GPADC=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AC100=y
CONFIG_MFD_AXP20X=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SY7636A=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
# CONFIG_REGULATOR_BD71828 is not set
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
# CONFIG_REGULATOR_HI6421V600 is not set
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LM363X is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
# CONFIG_REGULATOR_LP8788 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=y
# CONFIG_REGULATOR_MAX8907 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
CONFIG_REGULATOR_MT6358=y
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6360=y
# CONFIG_REGULATOR_MT6370 is not set
CONFIG_REGULATOR_MT6380=y
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PBIAS is not set
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
# CONFIG_REGULATOR_RT5120 is not set
CONFIG_REGULATOR_RT5190A=y
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
CONFIG_REGULATOR_RTQ2134=y
# CONFIG_REGULATOR_RTMV20 is not set
CONFIG_REGULATOR_RTQ6752=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_STPMIC1 is not set
CONFIG_REGULATOR_TI_ABB=y
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65217 is not set
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_UNIPHIER=y
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=y
# CONFIG_IR_SERIAL is not set
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
# CONFIG_IR_TOY is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_IR_WINBOND_CIR is not set
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
# CONFIG_RC_XBOX_DVD is not set
CONFIG_IR_IMG=y
# CONFIG_IR_IMG_RAW is not set
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
# CONFIG_IR_IMG_SONY is not set
# CONFIG_IR_IMG_SHARP is not set
# CONFIG_IR_IMG_SANYO is not set
# CONFIG_IR_IMG_RC5 is not set
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
# CONFIG_CEC_GPIO is not set
CONFIG_CEC_SAMSUNG_S5P=y
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_DVB_CORE=y
# end of Media core support
#
# Digital TV options
#
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
# CONFIG_DVB_TEST_DRIVERS is not set
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_R820T is not set
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_TDA18218=y
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_M88DS3103 is not set
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
# CONFIG_DVB_STV6110x is not set
CONFIG_DVB_STV6111=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
# CONFIG_DVB_MN88472 is not set
# CONFIG_DVB_MN88473 is not set
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA8261=y
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TS2020=y
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
# CONFIG_DVB_EC100 is not set
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
# CONFIG_DVB_RTL2830 is not set
CONFIG_DVB_RTL2832=y
CONFIG_DVB_S5H1432=y
# CONFIG_DVB_SI2168 is not set
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_STV0367=y
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_ZD1301_DEMOD=y
# CONFIG_DVB_ZL10353 is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_STV0297 is not set
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LG2160 is not set
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_DIB8000 is not set
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
# CONFIG_DVB_TC90522 is not set
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_AF9033=y
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=y
# CONFIG_DVB_HELENE is not set
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=y
# CONFIG_DVB_LNBP22 is not set
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_DRX39XYJ=y
#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_USE_DYNAMIC_DEBUG=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_BUDDY=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=y
# end of ARM devices
CONFIG_DRM_KMB_DISPLAY=y
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_EXYNOS is not set
CONFIG_DRM_ROCKCHIP=y
CONFIG_ROCKCHIP_VOP=y
CONFIG_ROCKCHIP_VOP2=y
CONFIG_ROCKCHIP_ANALOGIX_DP=y
# CONFIG_ROCKCHIP_CDN_DP is not set
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
# CONFIG_ROCKCHIP_LVDS is not set
CONFIG_ROCKCHIP_RGB=y
# CONFIG_ROCKCHIP_RK3066_HDMI is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_RCAR_DU=y
# CONFIG_DRM_RCAR_USE_CMM is not set
CONFIG_DRM_RCAR_DW_HDMI=y
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_MIPI_DSI is not set
CONFIG_DRM_RCAR_WRITEBACK=y
CONFIG_DRM_SUN4I=y
CONFIG_DRM_SUN4I_HDMI=y
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=y
# CONFIG_DRM_SUN6I_DSI is not set
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_DRM_SUN8I_MIXER=y
CONFIG_DRM_SUN8I_TCON_TOP=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_MSM=y
CONFIG_DRM_MSM_GPU_STATE=y
# CONFIG_DRM_MSM_GPU_SUDO is not set
CONFIG_DRM_MSM_MDSS=y
CONFIG_DRM_MSM_MDP4=y
CONFIG_DRM_MSM_MDP5=y
CONFIG_DRM_MSM_DPU=y
# CONFIG_DRM_MSM_DP is not set
# CONFIG_DRM_MSM_DSI is not set
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=y
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=y
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
# CONFIG_DRM_FSL_LDB is not set
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
# CONFIG_DRM_LONTIUM_LT9211 is not set
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_ITE_IT66121=y
# CONFIG_DRM_LVDS_CODEC is not set
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
# CONFIG_DRM_NXP_PTN3460 is not set
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=y
# CONFIG_DRM_TOSHIBA_TC358768 is not set
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_TI_SN65DSI83=y
# CONFIG_DRM_TI_SN65DSI86 is not set
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_DW_MIPI_DSI=y
# end of Display Interface Bridges
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_INGENIC=y
CONFIG_DRM_INGENIC_IPU=y
CONFIG_DRM_V3D=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_HISI_KIRIN=y
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
CONFIG_DRM_MESON=y
# CONFIG_DRM_MESON_DW_HDMI is not set
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_GM12U320=y
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_TVE200=y
# CONFIG_DRM_LIMA is not set
CONFIG_DRM_PANFROST=y
# CONFIG_DRM_ASPEED_GFX is not set
# CONFIG_DRM_MCDE is not set
# CONFIG_DRM_TIDSS is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_SPRD=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_OMAP1 is not set
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
# CONFIG_BACKLIGHT_RAVE_SP is not set
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# end of Graphics support
CONFIG_SOUND=y
# CONFIG_SND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
CONFIG_HID_MACALLY=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
CONFIG_HID_XIAOMI=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
# CONFIG_HID_MEGAWORLD_FF is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
# CONFIG_NINTENDO_FF is not set
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
# CONFIG_PLAYSTATION_FF is not set
CONFIG_HID_PXRC=y
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=y
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
# CONFIG_HID_KUNIT_TEST is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
# CONFIG_USB_XHCI_MTK is not set
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=y
# CONFIG_USB_BRCMSTB is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SPEAR=y
CONFIG_USB_OHCI_HCD_STI=y
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
CONFIG_USB_OHCI_HCD_LPC32XX=y
# CONFIG_USB_OHCI_HCD_AT91 is not set
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_DAVINCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_SH=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_RENESAS_USBHS_HCD=y
# CONFIG_USB_HCD_SSB is not set
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
# CONFIG_USB_MTU3 is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
# CONFIG_USB_MUSB_DUAL_ROLE is not set
#
# Platform Glue Layer
#
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_TUSB6010=y
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
# CONFIG_USB_MUSB_MEDIATEK is not set
CONFIG_USB_MUSB_POLARFIRE_SOC=y
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
# CONFIG_USB_DWC3_OF_SIMPLE is not set
# CONFIG_USB_DWC3_ST is not set
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PERIPHERAL=y
# CONFIG_USB_DWC2_DUAL_ROLE is not set
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_F8153X=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_WWAN=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_CHAOSKEY is not set
CONFIG_BRCM_USB_PINMAP=y
CONFIG_USB_ONBOARD_HUB=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
# CONFIG_USB_R8A66597 is not set
CONFIG_USB_RENESAS_USBHS_UDC=y
# CONFIG_USB_RENESAS_USB3 is not set
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_NET2272=y
# CONFIG_USB_NET2272_DMA is not set
# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_ASPEED_UDC=y
CONFIG_USB_ASPEED_VHUB=y
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
# CONFIG_USB_CONFIGFS_F_TCM is not set
#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
CONFIG_USB_GADGETFS=y
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_G_SERIAL=y
CONFIG_USB_G_PRINTER=y
# CONFIG_USB_G_ACM_MS is not set
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_MT6360=y
CONFIG_TYPEC_TCPCI_MT6370=y
CONFIG_TYPEC_TCPCI_MAXIM=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC_TPS6598X=y
# CONFIG_TYPEC_ANX7411 is not set
# CONFIG_TYPEC_RT1719 is not set
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_QCOM_PMIC=y
CONFIG_TYPEC_WUSB3801=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
# CONFIG_MMC_BLOCK is not set
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_CRYPTO is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_STM32_SDMMC is not set
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_SDHCI_S3C is not set
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_MESON_GX=y
# CONFIG_MMC_MESON_MX_SDHC is not set
CONFIG_MMC_MESON_MX_SDIO=y
# CONFIG_MMC_MOXART is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_DAVINCI=y
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_TMIO=y
CONFIG_MMC_SDHI=y
# CONFIG_MMC_SDHI_SYS_DMAC is not set
CONFIG_MMC_SDHI_INTERNAL_DMAC=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_BLUEFIELD=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_HI3798CV200=y
CONFIG_MMC_DW_K3=y
# CONFIG_MMC_DW_ROCKCHIP is not set
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_MTK=y
# CONFIG_MMC_OWL is not set
# CONFIG_MMC_LITEX is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_REALTEK_USB is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_AN30259A=y
# CONFIG_LEDS_ARIEL is not set
CONFIG_LEDS_AW2013=y
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_TURRIS_OMNIA=y
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
# CONFIG_LEDS_NETXBIG is not set
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
# CONFIG_LEDS_LM36274 is not set
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
# CONFIG_LEDS_BCM63138 is not set
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_MT6360 is not set
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM80X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABEOZ9=y
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_AC100=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BD70528 is not set
CONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_RC5T583 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=y
CONFIG_RTC_DRV_SC27XX=y
# CONFIG_RTC_DRV_SPEAR is not set
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_PL030 is not set
CONFIG_RTC_DRV_PL031=y
# CONFIG_RTC_DRV_AT91RM9200 is not set
CONFIG_RTC_DRV_AT91SAM9=y
# CONFIG_RTC_DRV_RZN1 is not set
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=y
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
# CONFIG_RTC_DRV_LPC32XX is not set
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_AMBA_PL08X=y
CONFIG_APPLE_ADMAC=y
CONFIG_AXI_DMAC=y
CONFIG_DMA_JZ4780=y
CONFIG_DMA_SA11X0=y
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
# CONFIG_EP93XX_DMA is not set
CONFIG_FSL_EDMA=y
CONFIG_FSL_QDMA=y
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_LPC18XX_DMAMUX is not set
# CONFIG_MCF_EDMA is not set
CONFIG_MILBEAUT_HDMAC=y
CONFIG_MILBEAUT_XDMAC=y
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=y
CONFIG_MV_XOR=y
# CONFIG_MV_XOR_V2 is not set
CONFIG_MXS_DMA=y
CONFIG_NBPFAXI_DMA=y
# CONFIG_PL330_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
CONFIG_STM32_MDMA=y
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
CONFIG_TEGRA186_GPC_DMA=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=y
# CONFIG_UNIPHIER_MDMAC is not set
CONFIG_UNIPHIER_XDMAC=y
CONFIG_XGENE_DMA=y
CONFIG_XILINX_DMA=y
CONFIG_XILINX_ZYNQMP_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_MTK_HSDMA=y
CONFIG_MTK_CQDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_RZN1_DMAMUX=y
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
# CONFIG_SH_DMAE_BASE is not set
# CONFIG_RCAR_DMAC is not set
CONFIG_RENESAS_USB_DMAC=y
CONFIG_RZ_DMAC=y
CONFIG_TI_EDMA=y
# CONFIG_DMA_OMAP is not set
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_IMG_ASCII_LCD=y
CONFIG_LCD2S=y
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
# CONFIG_ADE7854_I2C is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_USB_EMXX=y
CONFIG_STAGING_MEDIA=y
# CONFIG_VIDEO_SUNXI is not set
CONFIG_STAGING_MEDIA_DEPRECATED=y
# CONFIG_STAGING_BOARD is not set
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
# CONFIG_BCM2835_VCHIQ_MMAL is not set
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_NVSW_SN2201=y
CONFIG_OLPC_XO175=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_RK808 is not set
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_EN7523=y
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_LAN966X=y
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=y
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_VC7=y
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_BCM_63XX=y
# CONFIG_CLK_BCM_63XX_GATE is not set
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
# CONFIG_COMMON_CLK_HI3660 is not set
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
# CONFIG_COMMON_CLK_HI6220 is not set
CONFIG_RESET_HISI=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
# CONFIG_CLK_IMX8MM is not set
CONFIG_CLK_IMX8MN=y
# CONFIG_CLK_IMX8MP is not set
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y
#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
# CONFIG_INGENIC_CGU_JZ4780 is not set
CONFIG_INGENIC_CGU_X1000=y
# CONFIG_INGENIC_CGU_X1830 is not set
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
# CONFIG_COMMON_CLK_MT2701_VDECSYS is not set
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
# CONFIG_COMMON_CLK_MT2701_ETHSYS is not set
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
# CONFIG_COMMON_CLK_MT2712 is not set
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
# CONFIG_COMMON_CLK_MT6765_GCESYS is not set
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
# CONFIG_COMMON_CLK_MT6765_VCODECSYS is not set
# CONFIG_COMMON_CLK_MT6765_MFGSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI0ASYS is not set
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI1BSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI2BSYS is not set
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
CONFIG_COMMON_CLK_MT6779_IPESYS=y
# CONFIG_COMMON_CLK_MT6779_CAMSYS is not set
# CONFIG_COMMON_CLK_MT6779_VDECSYS is not set
# CONFIG_COMMON_CLK_MT6779_VENCSYS is not set
# CONFIG_COMMON_CLK_MT6779_MFGCFG is not set
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6795=y
# CONFIG_COMMON_CLK_MT6795_MFGCFG is not set
CONFIG_COMMON_CLK_MT6795_MMSYS=y
CONFIG_COMMON_CLK_MT6795_VDECSYS=y
# CONFIG_COMMON_CLK_MT6795_VENCSYS is not set
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
# CONFIG_COMMON_CLK_MT6797_IMGSYS is not set
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
CONFIG_COMMON_CLK_MT8135=y
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
CONFIG_COMMON_CLK_MT8186=y
CONFIG_COMMON_CLK_MT8192=y
CONFIG_COMMON_CLK_MT8192_AUDSYS=y
# CONFIG_COMMON_CLK_MT8192_CAMSYS is not set
# CONFIG_COMMON_CLK_MT8192_IMGSYS is not set
CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y
CONFIG_COMMON_CLK_MT8192_IPESYS=y
# CONFIG_COMMON_CLK_MT8192_MDPSYS is not set
# CONFIG_COMMON_CLK_MT8192_MFGCFG is not set
CONFIG_COMMON_CLK_MT8192_MMSYS=y
# CONFIG_COMMON_CLK_MT8192_MSDC is not set
CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
# CONFIG_COMMON_CLK_MT8192_VDECSYS is not set
# CONFIG_COMMON_CLK_MT8192_VENCSYS is not set
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8365=y
# CONFIG_COMMON_CLK_MT8365_APU is not set
CONFIG_COMMON_CLK_MT8365_CAM=y
CONFIG_COMMON_CLK_MT8365_MFG=y
# CONFIG_COMMON_CLK_MT8365_MMSYS is not set
CONFIG_COMMON_CLK_MT8365_VDEC=y
# CONFIG_COMMON_CLK_MT8365_VENC is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PHASE=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_SCLK_DIV=y
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_GXBB=y
# CONFIG_COMMON_CLK_AXG is not set
CONFIG_COMMON_CLK_AXG_AUDIO=y
# CONFIG_COMMON_CLK_G12A is not set
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
CONFIG_MCHP_CLK_MPFS=y
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_COMMON_CLK_PISTACHIO=y
# CONFIG_COMMON_CLK_QCOM is not set
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_EMEV2=y
CONFIG_CLK_RZA1=y
CONFIG_CLK_R7S9210=y
# CONFIG_CLK_R8A73A4 is not set
CONFIG_CLK_R8A7740=y
CONFIG_CLK_R8A7742=y
# CONFIG_CLK_R8A7743 is not set
# CONFIG_CLK_R8A7745 is not set
CONFIG_CLK_R8A77470=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
CONFIG_CLK_R8A774E1=y
CONFIG_CLK_R8A7778=y
# CONFIG_CLK_R8A7779 is not set
CONFIG_CLK_R8A7790=y
CONFIG_CLK_R8A7791=y
# CONFIG_CLK_R8A7792 is not set
CONFIG_CLK_R8A7794=y
# CONFIG_CLK_R8A7795 is not set
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
CONFIG_CLK_R8A77980=y
CONFIG_CLK_R8A77990=y
CONFIG_CLK_R8A77995=y
CONFIG_CLK_R8A779A0=y
CONFIG_CLK_R8A779F0=y
# CONFIG_CLK_R8A779G0 is not set
# CONFIG_CLK_R9A06G032 is not set
# CONFIG_CLK_R9A07G043 is not set
CONFIG_CLK_R9A07G044=y
CONFIG_CLK_R9A07G054=y
CONFIG_CLK_R9A09G011=y
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_ROCKCHIP=y
# CONFIG_CLK_PX30 is not set
# CONFIG_CLK_RV110X is not set
CONFIG_CLK_RV1126=y
# CONFIG_CLK_RK3036 is not set
CONFIG_CLK_RK312X=y
CONFIG_CLK_RK3188=y
# CONFIG_CLK_RK322X is not set
# CONFIG_CLK_RK3288 is not set
CONFIG_CLK_RK3308=y
CONFIG_CLK_RK3328=y
CONFIG_CLK_RK3368=y
# CONFIG_CLK_RK3399 is not set
# CONFIG_CLK_RK3568 is not set
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_S3C64XX_COMMON_CLK is not set
# CONFIG_S5PV210_COMMON_CLK is not set
CONFIG_EXYNOS_3250_COMMON_CLK=y
# CONFIG_EXYNOS_4_COMMON_CLK is not set
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
CONFIG_EXYNOS_5260_COMMON_CLK=y
# CONFIG_EXYNOS_5410_COMMON_CLK is not set
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
CONFIG_S3C2410_COMMON_CLK=y
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_TESLA_FSD_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
CONFIG_CLK_INTEL_SOCFPGA64=y
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
CONFIG_COMMON_CLK_TI_ADPLL=y
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_CLK_KUNIT_TEST is not set
CONFIG_CLK_GATE_KUNIT_TEST=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
CONFIG_BCM_KONA_TIMER=y
# CONFIG_DAVINCI_TIMER is not set
CONFIG_DIGICOLOR_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
CONFIG_DW_APB_TIMER_OF=y
CONFIG_FTTMR010_TIMER=y
# CONFIG_IXP4XX_TIMER is not set
CONFIG_ROCKCHIP_TIMER=y
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_TEGRA_TIMER=y
# CONFIG_VT8500_TIMER is not set
CONFIG_NPCM7XX_TIMER=y
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ASM9260_TIMER=y
CONFIG_CLKSRC_DBX500_PRCMU=y
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
CONFIG_KEYSTONE_TIMER=y
# CONFIG_INTEGRATOR_AP_TIMER is not set
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_TI_32K=y
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
# CONFIG_FSL_ERRATUM_A008585 is not set
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
CONFIG_ARM_TIMER_SP804=y
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_EXYNOS_MCT=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_FSL_FTM_TIMER=y
# CONFIG_OXNAS_RPS_TIMER is not set
CONFIG_SYS_SUPPORTS_SH_CMT=y
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
CONFIG_SYS_SUPPORTS_SH_TMU=y
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_CLKSRC_IMX_GPT is not set
# CONFIG_CLKSRC_IMX_TPM is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_INGENIC_TIMER=y
CONFIG_INGENIC_SYSOST=y
CONFIG_INGENIC_OST=y
# CONFIG_MICROCHIP_PIT64B is not set
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set
CONFIG_IOMMU_IO_PGTABLE_DART=y
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_OMAP_IOMMU is not set
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_SUN50I_IOMMU=y
# CONFIG_IPMMU_VMSA is not set
CONFIG_APPLE_DART=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS=y
# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
# CONFIG_ARM_SMMU_V3 is not set
CONFIG_S390_CCW_IOMMU=y
# CONFIG_S390_AP_IOMMU is not set
CONFIG_MTK_IOMMU=y
# CONFIG_QCOM_IOMMU is not set
CONFIG_VIRTIO_IOMMU=y
CONFIG_SPRD_IOMMU=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_RCAR_REMOTEPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
# CONFIG_MESON_GX_SOCINFO is not set
CONFIG_MESON_GX_PM_DOMAINS=y
# CONFIG_MESON_EE_PM_DOMAINS is not set
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
CONFIG_APPLE_PMGR_PWRSTATE=y
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
CONFIG_ASPEED_LPC_SNOOP=y
# CONFIG_ASPEED_UART_ROUTING is not set
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
CONFIG_AT91_SOC_SFR=y
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
# CONFIG_FSL_MC_DPIO is not set
# CONFIG_DPAA2_CONSOLE is not set
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
CONFIG_MTK_DEVAPC=y
# CONFIG_MTK_INFRACFG is not set
CONFIG_MTK_PMIC_WRAP=y
# CONFIG_MTK_SCPSYS is not set
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
# CONFIG_MTK_MMSYS is not set
CONFIG_MTK_SVS=y
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMPD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SPM=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers
CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RCAR_GEN3=y
CONFIG_ARCH_RZG2L=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
# CONFIG_ARCH_R8A77950 is not set
# CONFIG_ARCH_R8A77951 is not set
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77960=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A779F0=y
CONFIG_ARCH_R8A77980=y
# CONFIG_ARCH_R8A77970 is not set
CONFIG_ARCH_R8A779A0=y
# CONFIG_ARCH_R8A779G0 is not set
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
# CONFIG_ARCH_R8A774A1 is not set
# CONFIG_ARCH_R8A774B1 is not set
# CONFIG_ARCH_R9A07G043 is not set
CONFIG_ARCH_R9A07G044=y
# CONFIG_ARCH_R9A07G054 is not set
CONFIG_ARCH_R9A09G011=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
# CONFIG_SYSC_R8A7790 is not set
CONFIG_SYSC_R8A7795=y
# CONFIG_SYSC_R8A7791 is not set
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A779F0=y
# CONFIG_SYSC_R8A7792 is not set
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A779G0=y
# CONFIG_SYSC_RMOBILE is not set
CONFIG_SYSC_R8A77470=y
# CONFIG_SYSC_R8A7745 is not set
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
# CONFIG_ROCKCHIP_GRF is not set
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_ASV_ARM is not set
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
CONFIG_EXYNOS_PMU=y
CONFIG_EXYNOS_PMU_ARM_DRIVERS=y
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_EXYNOS_REGULATOR_COUPLER is not set
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_ARM_IMX_BUS_DEVFREQ=y
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77843=y
# CONFIG_EXTCON_PTN5150 is not set
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ARM_PL172_MPMC is not set
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
CONFIG_BRCMSTB_MEMC=y
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_GPMC_DEBUG is not set
CONFIG_MVEBU_DEVBUS=y
# CONFIG_FSL_CORENET_CF is not set
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_PL353_SMC=y
CONFIG_RENESAS_RPCIF=y
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
# CONFIG_TEGRA20_EMC is not set
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA180=y
# CONFIG_BMA400 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
CONFIG_DA311=y
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7091R5=y
# CONFIG_AD7291 is not set
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AXP20X_ADC=y
# CONFIG_AXP288_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
CONFIG_BERLIN2_ADC=y
CONFIG_CC10001_ADC=y
# CONFIG_DA9150_GPADC is not set
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_FSL_MX25_ADC=y
CONFIG_HX711=y
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
CONFIG_LPC32XX_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
# CONFIG_LTC2497 is not set
CONFIG_MAX1363=y
# CONFIG_MAX9611 is not set
CONFIG_MCP3422=y
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MESON_SARADC=y
CONFIG_NAU7802=y
CONFIG_NPCM_ADC=y
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_SPMI_RRADC=y
# CONFIG_QCOM_SPMI_IADC is not set
# CONFIG_QCOM_SPMI_VADC is not set
# CONFIG_QCOM_SPMI_ADC5 is not set
CONFIG_RCAR_GYRO_ADC=y
CONFIG_ROCKCHIP_SARADC=y
CONFIG_RICHTEK_RTQ6056=y
# CONFIG_RZG2L_ADC is not set
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
CONFIG_STM32_DFSDM_CORE=y
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_SUN4I_GPADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_TI_AM335X_ADC=y
CONFIG_VF610_ADC=y
CONFIG_XILINX_XADC=y
CONFIG_XILINX_AMS=y
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_HMC425=y
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
CONFIG_CCS811=y
# CONFIG_IAQCORE is not set
# CONFIG_PMS7003 is not set
CONFIG_SCD30_CORE=y
# CONFIG_SCD30_I2C is not set
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
# CONFIG_SENSIRION_SGP30 is not set
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# CONFIG_IIO_SCMI is not set
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
CONFIG_AD5446=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
# CONFIG_AD5696_I2C is not set
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=y
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
CONFIG_MAX517=y
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
# CONFIG_TI_DAC5571 is not set
CONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
# CONFIG_BMG160 is not set
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HDC2010=y
# CONFIG_HID_SENSOR_HUMIDITY is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
# CONFIG_HTU21 is not set
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BOSCH_BNO055=y
# CONFIG_BOSCH_BNO055_SERIAL is not set
CONFIG_BOSCH_BNO055_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_ADUX1020 is not set
CONFIG_AL3010=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
CONFIG_AS73211=y
# CONFIG_BH1750 is not set
CONFIG_BH1780=y
CONFIG_CM32181=y
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=y
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_LTRF216A=y
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
# CONFIG_TSL2583 is not set
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
CONFIG_VCNL4000=y
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
# CONFIG_IIO_ST_MAGN_I2C_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
# CONFIG_IIO_RESCALE_KUNIT_TEST is not set
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
# CONFIG_AD5272 is not set
CONFIG_DS1803=y
# CONFIG_MAX5432 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4531 is not set
# CONFIG_TPL0102 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=y
# CONFIG_BMP280 is not set
# CONFIG_DLHL60D is not set
CONFIG_DPS310=y
# CONFIG_HID_SENSOR_PRESS is not set
CONFIG_HP03=y
# CONFIG_ICP10100 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
# CONFIG_MB1232 is not set
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
CONFIG_SX9360=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
# CONFIG_HID_SENSOR_TEMP is not set
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
# CONFIG_TMP117 is not set
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# end of Temperature sensors
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
# CONFIG_AL_FIC is not set
CONFIG_DW_APB_ICTL=y
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
# CONFIG_SL28CPLD_INTC is not set
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
CONFIG_TS4800_IRQ=y
CONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_PARTITION_PERCPU=y
# CONFIG_IRQ_UNIPHIER_AIDET is not set
CONFIG_MESON_IRQ_GPIO=y
CONFIG_IMX_IRQSTEER=y
# CONFIG_IMX_INTMUX is not set
CONFIG_IMX_MU_MSI=y
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_APPLE_AIC=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=y
CONFIG_RESET_INTEL_GW=y
# CONFIG_RESET_K210 is not set
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_POLARFIRE_SOC is not set
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
# CONFIG_RESET_SUNPLUS is not set
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=y
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
CONFIG_USB_LGM_PHY=y
# CONFIG_PHY_CAN_TRANSCEIVER is not set
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN9I_USB=y
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=y
# CONFIG_PHY_HI3660_USB is not set
CONFIG_PHY_HI3670_USB=y
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_COMPHY=y
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
CONFIG_PHY_MVEBU_A38X_COMPHY=y
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
# CONFIG_PHY_MTK_MIPI_DSI is not set
CONFIG_PHY_MTK_DP=y
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
# CONFIG_PHY_OCELOT_SERDES is not set
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=y
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_HS=y
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
CONFIG_PHY_QCOM_USB_SS=y
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN2=y
# CONFIG_PHY_RCAR_GEN3_PCIE is not set
# CONFIG_PHY_RCAR_GEN3_USB2 is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
CONFIG_PHY_ROCKCHIP_DP=y
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
CONFIG_PHY_ROCKCHIP_EMMC=y
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_ROCKCHIP_USB is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
CONFIG_PHY_SAMSUNG_UFS=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_EXYNOS5_USBDRD=y
# CONFIG_PHY_UNIPHIER_USB2 is not set
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=y
CONFIG_PHY_UNIPHIER_AHCI=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_SUNPLUS_USB=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_TUSB1210=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCI_PMU is not set
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_ARM_PMU is not set
# CONFIG_ARM_SMMU_V3_PMU is not set
# CONFIG_ARM_DSU_PMU is not set
CONFIG_FSL_IMX8_DDR_PMU=y
# CONFIG_XGENE_PMU is not set
CONFIG_ARM_SPE_PMU=y
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
CONFIG_ALIBABA_UNCORE_DRW_PMU=y
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_APPLE_EFUSES=y
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_BRCM_NVRAM=y
CONFIG_NVMEM_IMX_IIM=y
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
CONFIG_NVMEM_LAYERSCAPE_SFP=y
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
CONFIG_NVMEM_LPC18XX_OTP=y
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
CONFIG_NVMEM_MICROCHIP_OTPC=y
CONFIG_NVMEM_MTK_EFUSE=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_NVMEM_QCOM_QFPROM=y
CONFIG_NVMEM_RAVE_SP_EEPROM=y
# CONFIG_NVMEM_RMEM is not set
CONFIG_NVMEM_ROCKCHIP_EFUSE=y
CONFIG_NVMEM_ROCKCHIP_OTP=y
CONFIG_NVMEM_SC27XX_EFUSE=y
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_NVMEM_SPRD_EFUSE=y
CONFIG_NVMEM_STM32_ROMEM=y
CONFIG_NVMEM_SUNPLUS_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_UNIPHIER_EFUSE=y
CONFIG_NVMEM_VF610_OCOTP=y
#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
# CONFIG_STM_SOURCE_HEARTBEAT is not set
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_TEE=y
# CONFIG_OPTEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
CONFIG_TI_ECAP_CAPTURE=y
CONFIG_MOST=y
# CONFIG_MOST_USB_HDM is not set
# CONFIG_MOST_CDEV is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
# CONFIG_EXT4_KUNIT_TESTS is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_F2FS_IOSTAT is not set
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
# CONFIG_FAT_KUNIT_TEST is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
# CONFIG_TRUSTED_KEYS_TEE is not set
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
# end of Crypto core or helper
#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ARIA=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_KEYWRAP=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_AEGIS128_SIMD is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_NHPOLY1305_NEON=y
CONFIG_CRYPTO_CHACHA20_NEON=y
#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_POLY1305_NEON=y
# CONFIG_CRYPTO_SHA1_ARM64_CE is not set
CONFIG_CRYPTO_SHA256_ARM64=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_SHA512_ARM64=y
# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
# CONFIG_CRYPTO_SHA3_ARM64 is not set
CONFIG_CRYPTO_SM3_ARM64_CE=y
# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
CONFIG_CRYPTO_AES_ARM64=y
CONFIG_CRYPTO_AES_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_BS=y
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
CONFIG_CRYPTO_SM4_ARM64_CE_BLK=y
CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
# end of Accelerated Cryptographic Algorithms for CPU (arm64)
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_INDIRECT_PIO=y
CONFIG_TRACE_MMIO_ACCESS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
CONFIG_CMA_SIZE_SEL_MAX=y
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_FORCE_NR_CPUS=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_SLAB=y
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
# CONFIG_KFENCE_DEFERRABLE is not set
CONFIG_KFENCE_STATIC_KEYS=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
CONFIG_TRACE_PREEMPT_TOGGLE=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_PREEMPT_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
CONFIG_TRACEPOINT_BENCHMARK=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
# CONFIG_RING_BUFFER_RECORD_RECURSION is not set
CONFIG_GCOV_PROFILE_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_HIST_TRIGGERS_DEBUG=y
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_LINKS_AND_SINKS=y
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
CONFIG_CORESIGHT_CATU=y
CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y
# CONFIG_CORESIGHT_SOURCE_ETM4X is not set
CONFIG_CORESIGHT_STM=y
# CONFIG_CORESIGHT_CPU_DEBUG is not set
# CONFIG_CORESIGHT_CTI is not set
CONFIG_ULTRASOC_SMB=y
# end of arm64 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
# CONFIG_KUNIT_TEST is not set
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
# CONFIG_KCOV_ENABLE_COMPARISONS is not set
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
# CONFIG_TEST_SORT is not set
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
# CONFIG_TEST_STRSCPY is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
# CONFIG_SYSCTL_KUNIT_TEST is not set
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
# CONFIG_BITS_TEST is not set
# CONFIG_RATIONAL_KUNIT_TEST is not set
# CONFIG_MEMCPY_KUNIT_TEST is not set
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
# CONFIG_OVERFLOW_KUNIT_TEST is not set
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_HW_BREAKPOINT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
# CONFIG_TEST_DEBUG_VIRTUAL is not set
CONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_MEMINIT is not set
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-09 13:50 ` Junhao He
` (3 preceding siblings ...)
(?)
@ 2022-11-11 22:06 ` kernel test robot
2022-11-14 10:49 ` Suzuki K Poulose
-1 siblings, 1 reply; 30+ messages in thread
From: kernel test robot @ 2022-11-11 22:06 UTC (permalink / raw)
To: Junhao He, mathieu.poirier, suzuki.poulose, mike.leach, leo.yan,
jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng,
hejunhao3
[-- Attachment #1: Type: text/plain, Size: 5082 bytes --]
Hi Junhao,
I love your patch! Perhaps something to improve:
[auto build test WARNING on soc/for-next]
[also build test WARNING on linus/master v6.1-rc4 next-20221111]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
patch link: https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
config: arm64-randconfig-s033-20221111
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
git checkout 49ede03fd874b65deca5382ea84c3377188136da
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse: cast removes address space '__iomem' of expression
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void [noderef] __iomem *base @@ got void * @@
drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: expected void [noderef] __iomem *base
drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got void *
vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
89
90 static ssize_t smb_read(struct file *file, char __user *data, size_t len,
91 loff_t *ppos)
92 {
93 struct smb_drv_data *drvdata = container_of(file->private_data,
94 struct smb_drv_data, miscdev);
95 struct smb_data_buffer *sdb = &drvdata->sdb;
96 struct device *dev = &drvdata->csdev->dev;
97 ssize_t to_copy = 0;
98
99 mutex_lock(&drvdata->mutex);
100
101 if (!sdb->data_size) {
102 smb_update_data_size(drvdata);
103 if (!sdb->data_size)
104 goto out;
105 }
106
107 to_copy = min(sdb->data_size, len);
108
109 /* Copy parts of trace data when read pointer wrap around SMB buffer */
110 if (sdb->rd_offset + to_copy > sdb->buf_size)
111 to_copy = sdb->buf_size - sdb->rd_offset;
112
> 113 if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
114 to_copy)) {
115 dev_dbg(dev, "Failed to copy data to user\n");
116 to_copy = -EFAULT;
117 goto out;
118 }
119
120 *ppos += to_copy;
121 sdb->data_size -= to_copy;
122 sdb->rd_offset += to_copy;
123 sdb->rd_offset %= sdb->buf_size;
124 writel(sdb->start_addr + sdb->rd_offset,
125 drvdata->base + SMB_LB_RD_ADDR_REG);
126 dev_dbg(dev, "%zu bytes copied\n", to_copy);
127 out:
128 if (!sdb->data_size)
129 smb_reset_buffer_status(drvdata);
130 mutex_unlock(&drvdata->mutex);
131
132 return to_copy;
133 }
134
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 206159 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.1.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="aarch64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
# CONFIG_TIME_KUNIT_TEST is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
CONFIG_CONTEXT_TRACKING_USER_FORCE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=m
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_LD_ORPHAN_WARN=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
# CONFIG_PRINTK is not set
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM64=y
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=16
CONFIG_ARM64_CONT_PTE_SHIFT=5
CONFIG_ARM64_CONT_PMD_SHIFT=5
CONFIG_ARCH_MMAP_RND_BITS_MIN=14
CONFIG_ARCH_MMAP_RND_BITS_MAX=14
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=7
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
#
# Platform selection
#
# CONFIG_ARCH_ACTIONS is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_ALPINE is not set
CONFIG_ARCH_APPLE=y
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
CONFIG_ARCH_BITMAIN=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_SPARX5=y
CONFIG_ARCH_K3=y
# CONFIG_ARCH_LG1K is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEEMBAY is not set
# CONFIG_ARCH_MEDIATEK is not set
# CONFIG_ARCH_MESON is not set
CONFIG_ARCH_MVEBU=y
# CONFIG_ARCH_NXP is not set
# CONFIG_ARCH_NPCM is not set
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_REALTEK=y
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SEATTLE is not set
CONFIG_ARCH_INTEL_SOCFPGA=y
CONFIG_ARCH_SYNQUACER=y
# CONFIG_ARCH_TEGRA is not set
CONFIG_ARCH_TESLA_FSD=y
CONFIG_ARCH_SPRD=y
CONFIG_ARCH_THUNDER=y
# CONFIG_ARCH_THUNDER2 is not set
CONFIG_ARCH_UNIPHIER=y
# CONFIG_ARCH_VEXPRESS is not set
CONFIG_ARCH_VISCONTI=y
CONFIG_ARCH_XGENE=y
# CONFIG_ARCH_ZYNQMP is not set
# end of Platform selection
#
# Kernel Features
#
#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
# CONFIG_ARM64_ERRATUM_826319 is not set
CONFIG_ARM64_ERRATUM_827319=y
# CONFIG_ARM64_ERRATUM_824069 is not set
# CONFIG_ARM64_ERRATUM_819472 is not set
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_1742098=y
CONFIG_ARM64_ERRATUM_845719=y
# CONFIG_ARM64_ERRATUM_843419 is not set
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
# CONFIG_ARM64_ERRATUM_1418040 is not set
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1319367=y
# CONFIG_ARM64_ERRATUM_1530923 is not set
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_2441007=y
# CONFIG_ARM64_ERRATUM_1286807 is not set
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
# CONFIG_ARM64_ERRATUM_1508412 is not set
CONFIG_ARM64_ERRATUM_2051678=y
# CONFIG_ARM64_ERRATUM_2077057 is not set
# CONFIG_ARM64_ERRATUM_2658417 is not set
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
# CONFIG_ARM64_ERRATUM_2054223 is not set
CONFIG_ARM64_ERRATUM_2067961=y
CONFIG_ARM64_ERRATUM_2441009=y
# CONFIG_ARM64_ERRATUM_2457168 is not set
# CONFIG_CAVIUM_ERRATUM_22375 is not set
# CONFIG_CAVIUM_ERRATUM_23154 is not set
# CONFIG_CAVIUM_ERRATUM_27456 is not set
# CONFIG_CAVIUM_ERRATUM_30115 is not set
CONFIG_CAVIUM_TX2_ERRATUM_219=y
# CONFIG_FUJITSU_ERRATUM_010001 is not set
# CONFIG_HISILICON_ERRATUM_161600802 is not set
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework
# CONFIG_ARM64_4K_PAGES is not set
# CONFIG_ARM64_16K_PAGES is not set
CONFIG_ARM64_64K_PAGES=y
# CONFIG_ARM64_VA_BITS_42 is not set
# CONFIG_ARM64_VA_BITS_48 is not set
CONFIG_ARM64_VA_BITS_52=y
# CONFIG_ARM64_FORCE_52BIT is not set
CONFIG_ARM64_VA_BITS=52
# CONFIG_ARM64_PA_BITS_48 is not set
CONFIG_ARM64_PA_BITS_52=y
CONFIG_ARM64_PA_BITS=52
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_SCHED_MC is not set
CONFIG_SCHED_CLUSTER=y
# CONFIG_SCHED_SMT is not set
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
# CONFIG_NUMA is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_TRANS_TABLE=y
# CONFIG_XEN is not set
CONFIG_ARCH_FORCE_MAX_ORDER=14
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
# CONFIG_ARM64_SW_TTBR0_PAN is not set
# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_COMPAT_ALIGNMENT_FIXUPS=y
#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
CONFIG_AS_HAS_LDAPR=y
CONFIG_AS_HAS_LSE_ATOMICS=y
CONFIG_ARM64_LSE_ATOMICS=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
# end of ARMv8.1 architectural features
#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
# CONFIG_ARM64_PMEM is not set
CONFIG_ARM64_RAS_EXTN=y
# CONFIG_ARM64_CNP is not set
# end of ARMv8.2 architectural features
#
# ARMv8.3 architectural features
#
# CONFIG_ARM64_PTR_AUTH is not set
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_PAC=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features
#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features
#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
# CONFIG_ARM64_E0PD is not set
CONFIG_ARM64_AS_HAS_MTE=y
# end of ARMv8.5 architectural features
#
# ARMv8.7 architectural features
#
CONFIG_ARM64_EPAN=y
# end of ARMv8.7 architectural features
CONFIG_ARM64_SVE=y
# CONFIG_ARM64_SME is not set
CONFIG_ARM64_MODULE_PLTS=y
CONFIG_ARM64_PSEUDO_NMI=y
# CONFIG_ARM64_DEBUG_PRIORITY_MASKING is not set
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_ARCH_NR_GPIO=2048
# end of Kernel Features
#
# Boot options
#
CONFIG_CMDLINE=""
# CONFIG_EFI is not set
# end of Boot options
#
# Power management options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_PSCI_CPUIDLE is not set
# CONFIG_ARM_CLPS711X_CPUIDLE is not set
# end of ARM CPU Idle Drivers
# end of CPU Idle
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=y
CONFIG_ARM_MEDIATEK_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_HW=m
# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
# CONFIG_ARM_SCMI_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set
# end of CPU Frequency scaling
# end of CPU Power Management
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_ARCH_SUPPORTS_SHADOW_CALL_STACK=y
# CONFIG_SHADOW_CALL_STACK is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=14
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=7
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_RELR=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
# CONFIG_MODULE_SIG_ALL is not set
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
CONFIG_LRU_GEN=y
# CONFIG_LRU_GEN_ENABLED is not set
CONFIG_LRU_GEN_STATS=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=m
# CONFIG_PCIE_XILINX_NWL is not set
CONFIG_PCI_FTPCI100=y
# CONFIG_PCI_TEGRA is not set
# CONFIG_PCIE_RCAR_HOST is not set
# CONFIG_PCIE_RCAR_EP is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=m
CONFIG_PCIE_XILINX=y
# CONFIG_PCIE_XILINX_CPM is not set
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
CONFIG_PCI_HOST_THUNDER_ECAM=y
# CONFIG_PCIE_ROCKCHIP_HOST is not set
# CONFIG_PCIE_ROCKCHIP_EP is not set
# CONFIG_PCIE_MEDIATEK is not set
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
# CONFIG_PCIE_BRCMSTB is not set
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR=0xfffff000
CONFIG_PCIE_APPLE=y
# CONFIG_PCIE_MT7621 is not set
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# CONFIG_PCIE_DW_PLAT_EP is not set
CONFIG_PCI_EXYNOS=y
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCI_LAYERSCAPE is not set
# CONFIG_PCI_LAYERSCAPE_EP is not set
# CONFIG_PCI_HISI is not set
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_QCOM_EP=y
CONFIG_PCIE_ARMADA_8K=y
# CONFIG_PCIE_ARTPEC6_HOST is not set
# CONFIG_PCIE_ARTPEC6_EP is not set
# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
# CONFIG_PCIE_INTEL_GW is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_KEEMBAY_EP is not set
CONFIG_PCIE_KIRIN=m
# CONFIG_PCIE_HISI_STB is not set
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_TEGRA194_EP is not set
CONFIG_PCIE_VISCONTI_HOST=y
CONFIG_PCIE_UNIPHIER=y
# CONFIG_PCIE_UNIPHIER_EP is not set
# CONFIG_PCIE_AL is not set
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=m
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=y
# CONFIG_RAPIDIO_MPORT_CDEV is not set
#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_I3C=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
CONFIG_BRCMSTB_GISB_ARB=y
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
CONFIG_MOXTET=m
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_QCOM_SSC_BLOCK_BUS=y
# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNXI_RSB=y
# CONFIG_UNIPHIER_SYSTEM_BUS is not set
CONFIG_VEXPRESS_CONFIG=m
# CONFIG_FSL_MC_BUS is not set
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=m
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_INTEL_STRATIX10_SERVICE=m
CONFIG_INTEL_STRATIX10_RSU=m
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_ARM_FFA_TRANSPORT=y
CONFIG_ARM_FFA_SMCCC=y
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_TEE_BNXT_FW is not set
CONFIG_CS_DSP=m
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=m
# CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT is not set
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
CONFIG_GOOGLE_VPD=m
CONFIG_ARM_PSCI_FW=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
# CONFIG_ARM_SMCCC_SOC_ID is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
# CONFIG_OF_DYNAMIC is not set
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
CONFIG_NVME_AUTH=y
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_FC is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=m
# CONFIG_AD525X_DPOT_SPI is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_GEHC_ACHC is not set
# CONFIG_HP_ILO is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_PCH_PHUB is not set
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=m
CONFIG_PCI_ENDPOINT_TEST=m
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=m
CONFIG_VCPU_STALL_DETECTOR=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_SPI=m
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
CONFIG_BCM_VK=m
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=m
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# CONFIG_PVPANIC_PCI is not set
CONFIG_GP_PCI1XXXX=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=m
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=m
CONFIG_SCSI_SNIC=m
CONFIG_SCSI_SNIC_DEBUG_FS=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
CONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
CONFIG_AHCI_DWC=y
# CONFIG_AHCI_ST is not set
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_CEVA=m
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
CONFIG_AHCI_SUNXI=y
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
# CONFIG_PATA_BK3710 is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IMX is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=m
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_OPTIDMA=m
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_PXA is not set
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_IXP4XX_CF is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=y
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SAMSUNG_CF is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_CACHE=m
# CONFIG_DM_CACHE_SMQ is not set
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_EBS=m
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_MULTIPATH_HST is not set
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=m
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_CLPS711X is not set
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_EP93XX is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PINEPHONE=m
CONFIG_KEYBOARD_SAMSUNG=m
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CAP11XX=m
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_MT6779 is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
CONFIG_KEYBOARD_CYPRESS_SF=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
CONFIG_TOUCHSCREEN_EXC3000=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_HIDEEP=m
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_ILITEK=m
# CONFIG_TOUCHSCREEN_IPROC is not set
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MSG2638=m
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_IMAGIS=m
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_MIGOR is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=m
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
# CONFIG_TOUCHSCREEN_USB_E2I is not set
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TS4800 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMFTS=m
# CONFIG_TOUCHSCREEN_SUN4I is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_TOUCHSCREEN_ZET6223=m
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_TOUCHSCREEN_ZINITIX=m
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_AMBAKMI=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_SERIO_SUN4I_PS2=m
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=m
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_ATMEL=y
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
# CONFIG_HW_RANDOM_OMAP is not set
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_XGENE=m
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_CAVIUM=m
CONFIG_HW_RANDOM_MTK=y
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=m
CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=m
CONFIG_HW_RANDOM_CN10K=y
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_SCR24X=m
# end of PCMCIA character devices
CONFIG_DEVMEM=y
# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=m
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_ATMEL=y
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
# CONFIG_XILLYBUS is not set
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_GPMUX is not set
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=m
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_HIX5HD2 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=m
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=m
CONFIG_I2C_CADENCE=m
CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=m
CONFIG_I2C_EXYNOS5=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
CONFIG_I2C_HISI=m
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=m
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_NPCM is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
CONFIG_I2C_APPLE=m
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
CONFIG_I2C_QCOM_CCI=m
# CONFIG_I2C_QCOM_GENI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=m
# CONFIG_I2C_RZV2M is not set
CONFIG_I2C_S3C2410=m
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
CONFIG_I2C_UNIPHIER=m
CONFIG_I2C_UNIPHIER_F=m
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_THUNDERX=m
CONFIG_I2C_XILINX=m
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_DLN2 is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PCI1XXXX=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_XGENE_SLIMPRO=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=m
CONFIG_CDNS_I3C_MASTER=m
CONFIG_DW_I3C_MASTER=m
CONFIG_SVC_I3C_MASTER=m
CONFIG_MIPI_I3C_HCI=m
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=m
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
CONFIG_SPI_ARMADA_3700=y
# CONFIG_SPI_ASPEED_SMC is not set
# CONFIG_SPI_ATMEL is not set
# CONFIG_SPI_ATMEL_QUADSPI is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
# CONFIG_SPI_CLPS711X is not set
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_DLN2=y
# CONFIG_SPI_EP93XX is not set
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
CONFIG_SPI_GPIO=y
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_JCORE is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LP8841_RTC is not set
CONFIG_SPI_FSL_LIB=m
CONFIG_SPI_FSL_SPI=m
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=m
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_NPCM_FIU is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
CONFIG_SPI_ORION=m
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
# CONFIG_SPI_PL022 is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
CONFIG_SPI_ROCKCHIP=m
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QCOM_QSPI is not set
CONFIG_SPI_QUP=m
# CONFIG_SPI_QCOM_GENI is not set
CONFIG_SPI_S3C64XX=m
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
CONFIG_SPI_SIFIVE=m
CONFIG_SPI_SPRD=y
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_ST_SSC4 is not set
CONFIG_SPI_SUN4I=m
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not set
CONFIG_SPI_MXIC=m
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
# CONFIG_SPI_TEGRA20_SLINK is not set
# CONFIG_SPI_THUNDERX is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_UNIPHIER is not set
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=y
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_LOOPBACK_TEST is not set
CONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_APPLE_GPIO=y
# CONFIG_PINCTRL_AT91PIO4 is not set
# CONFIG_PINCTRL_BM1880 is not set
CONFIG_PINCTRL_CY8C95X0=m
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_KEEMBAY is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=m
# CONFIG_PINCTRL_THUNDERBAY is not set
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
# CONFIG_PINCTRL_EXYNOS_ARM is not set
CONFIG_PINCTRL_EXYNOS_ARM64=y
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
CONFIG_PINCTRL_SUNXI=y
CONFIG_PINCTRL_SUN4I_A10=y
# CONFIG_PINCTRL_SUN5I is not set
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN6I_A31_R is not set
CONFIG_PINCTRL_SUN8I_A23=y
CONFIG_PINCTRL_SUN8I_A33=y
CONFIG_PINCTRL_SUN8I_A83T=y
# CONFIG_PINCTRL_SUN8I_A83T_R is not set
# CONFIG_PINCTRL_SUN8I_A23_R is not set
CONFIG_PINCTRL_SUN8I_H3=y
# CONFIG_PINCTRL_SUN8I_H3_R is not set
# CONFIG_PINCTRL_SUN8I_V3S is not set
CONFIG_PINCTRL_SUN9I_A80=y
CONFIG_PINCTRL_SUN9I_A80_R=y
CONFIG_PINCTRL_SUN20I_D1=y
# CONFIG_PINCTRL_SUN50I_A64 is not set
CONFIG_PINCTRL_SUN50I_A64_R=y
CONFIG_PINCTRL_SUN50I_A100=y
CONFIG_PINCTRL_SUN50I_A100_R=y
CONFIG_PINCTRL_SUN50I_H5=y
# CONFIG_PINCTRL_SUN50I_H6 is not set
CONFIG_PINCTRL_SUN50I_H6_R=y
# CONFIG_PINCTRL_SUN50I_H616 is not set
# CONFIG_PINCTRL_SUN50I_H616_R is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
# CONFIG_PINCTRL_UNIPHIER is not set
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=m
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EIC_SPRD=m
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=m
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=m
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MVEBU=y
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_PL061=m
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_SNPS_CREG is not set
CONFIG_GPIO_SPRD=m
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=m
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
CONFIG_GPIO_THUNDERX=m
CONFIG_GPIO_UNIPHIER=m
CONFIG_GPIO_VISCONTI=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_WCD934X is not set
# CONFIG_GPIO_XGENE is not set
CONFIG_GPIO_XGENE_SB=m
CONFIG_GPIO_XILINX=m
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=m
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCA9570=m
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=m
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ALTERA_A10SR=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DLN2=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_LP87565=m
CONFIG_GPIO_MADERA=m
# CONFIG_GPIO_MAX77650 is not set
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=m
# CONFIG_GPIO_MLXBF is not set
# CONFIG_GPIO_MLXBF2 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=m
CONFIG_GPIO_MOXTET=m
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=m
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=m
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_ATC260X=m
# CONFIG_POWER_RESET_BRCMKONA is not set
CONFIG_POWER_RESET_BRCMSTB=y
# CONFIG_POWER_RESET_GEMINI_POWEROFF is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_OCELOT_RESET is not set
# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MT6323=y
# CONFIG_POWER_RESET_REGULATOR is not set
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_XGENE=y
# CONFIG_POWER_RESET_KEYSTONE is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_POWER_RESET_RMOBILE is not set
CONFIG_REBOOT_MODE=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_POWER_RESET_SC27XX is not set
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_IP5XXX_POWER=m
CONFIG_TEST_POWER=m
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=m
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9052=y
# CONFIG_CHARGER_DA9150 is not set
# CONFIG_BATTERY_DA9150 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_DETECTOR_MAX14656=m
# CONFIG_CHARGER_MAX77650 is not set
CONFIG_CHARGER_MAX77693=m
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=m
# CONFIG_CHARGER_TPS65217 is not set
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_UG3105=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_ARM_SCPI=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_SPARX5=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GSC=m
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=m
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2947_SPI=m
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC2992=m
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_MLXREG_FAN=m
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NPCM7XX=m
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_PECI_CPUTEMP is not set
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
CONFIG_SENSORS_IRPS5401=m
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
CONFIG_SENSORS_LT7182S=m
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
CONFIG_SENSORS_MAX20730=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
# CONFIG_SENSORS_PLI1209BC_REGULATOR is not set
CONFIG_SENSORS_PM6764TR=m
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_TPS546D24 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VEXPRESS is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_XGENE=m
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
CONFIG_K3_THERMAL=y
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
CONFIG_SUN8I_THERMAL=m
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
CONFIG_ARMADA_THERMAL=y
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=y
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_LMH is not set
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
CONFIG_SPRD_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_MIPS is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ALTERA_A10SR=y
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_ACT8945A=m
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_ATMEL_HLCDC=m
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=m
# CONFIG_MFD_AC100 is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_AXP20X_RSB is not set
CONFIG_MFD_MADERA=m
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_MADERA_SPI is not set
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=y
# CONFIG_MFD_ENE_KB3930 is not set
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=m
CONFIG_MFD_IQS62X=m
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77650=m
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=m
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_OCELOT=m
CONFIG_EZX_PCAP=y
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
CONFIG_MFD_NTXEC=m
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_QCOM_RPM is not set
CONFIG_MFD_SY7636A=m
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=m
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=m
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=m
CONFIG_MFD_TI_LMU=m
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=m
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_WM8994=m
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STMFX=m
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_MFD_QCOM_PM8008=m
CONFIG_MFD_VEXPRESS_SYSREG=m
CONFIG_RAVE_SP_CORE=m
# CONFIG_MFD_INTEL_M10_BMC is not set
CONFIG_MFD_RSMU_I2C=m
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_ACT8945A=m
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_ARIZONA_LDO1=m
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
CONFIG_REGULATOR_ATC260X=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9121=m
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP873X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LP87565=m
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=m
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX20086=m
# CONFIG_REGULATOR_MAX77686 is not set
CONFIG_REGULATOR_MAX77693=m
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6331 is not set
CONFIG_REGULATOR_MT6332=y
# CONFIG_REGULATOR_MT6358 is not set
# CONFIG_REGULATOR_MT6359 is not set
CONFIG_REGULATOR_MT6397=m
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
# CONFIG_REGULATOR_RN5T618 is not set
CONFIG_REGULATOR_RT4801=m
# CONFIG_REGULATOR_RT5033 is not set
CONFIG_REGULATOR_RT5190A=m
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6245=m
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SKY81452=m
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY7636A=m
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=m
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS6286X=m
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=m
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_UNIPHIER=y
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_VEXPRESS is not set
CONFIG_REGULATOR_VQMMC_IPQ4019=y
CONFIG_REGULATOR_WM8994=m
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=m
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_MEM2MEM_DEV=m
# CONFIG_V4L2_FLASH_LED_CLASS is not set
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_SHARK is not set
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SI4713=m
# CONFIG_RADIO_SI476X is not set
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
# CONFIG_RADIO_WL1273 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_KEENE is not set
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
# CONFIG_RADIO_SI470X is not set
CONFIG_USB_SI4713=m
# CONFIG_PLATFORM_SI4713 is not set
CONFIG_I2C_SI4713=m
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
# CONFIG_MEDIA_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
CONFIG_VIDEO_VIMC=m
CONFIG_VIDEO_VIVID=m
# CONFIG_VIDEO_VIVID_CEC is not set
CONFIG_VIDEO_VIVID_MAX_DEVS=64
# CONFIG_DVB_TEST_DRIVERS is not set
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_CCS_PLL=m
CONFIG_VIDEO_AR0521=m
# CONFIG_VIDEO_HI556 is not set
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
CONFIG_VIDEO_IMX219=m
# CONFIG_VIDEO_IMX258 is not set
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX290=m
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX334 is not set
CONFIG_VIDEO_IMX335=m
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_IMX412=m
CONFIG_VIDEO_MAX9271_LIB=m
CONFIG_VIDEO_MT9M001=m
# CONFIG_VIDEO_MT9M032 is not set
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T001=m
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
# CONFIG_VIDEO_MT9V111 is not set
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_OG01A1B=m
CONFIG_VIDEO_OV02A10=m
# CONFIG_VIDEO_OV08D10 is not set
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
CONFIG_VIDEO_OV2680=m
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5648=m
# CONFIG_VIDEO_OV5670 is not set
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5693=m
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6650=m
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7740=m
# CONFIG_VIDEO_OV8856 is not set
CONFIG_VIDEO_OV8865=m
CONFIG_VIDEO_OV9282=m
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_RDACM20 is not set
CONFIG_VIDEO_RDACM21=m
CONFIG_VIDEO_RJ54N1=m
# CONFIG_VIDEO_S5C73M3 is not set
CONFIG_VIDEO_S5K4ECGX=m
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_CCS=m
# CONFIG_VIDEO_ET8EK8 is not set
CONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
CONFIG_VIDEO_DW9714=m
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_ISL7998X=m
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=m
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
CONFIG_VIDEO_ADV7511_CEC=y
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=m
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_FC2580=m
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=m
# CONFIG_MEDIA_TUNER_MC44S803 is not set
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_R820T is not set
CONFIG_MEDIA_TUNER_SI2157=m
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
# CONFIG_DVB_SI2165 is not set
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_DS3000 is not set
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_STV6110=m
# CONFIG_DVB_TDA10071 is not set
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_TUNER_CX24113=m
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_VES1X93=m
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_CX22700 is not set
CONFIG_DVB_CX22702=m
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_DRXD=m
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_MT352=m
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_RTL2830 is not set
CONFIG_DVB_RTL2832=m
# CONFIG_DVB_RTL2832_SDR is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_SI2168 is not set
CONFIG_DVB_SP887X=m
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_CXD2880=m
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_STV0297 is not set
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
# CONFIG_DVB_LG2160 is not set
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_MXL692 is not set
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_AF9033=m
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_PVR2 is not set
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_ATMEL is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=m
CONFIG_FB_SMSCUFX=m
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SIMPLE=m
# CONFIG_FB_SSD1307 is not set
CONFIG_FB_SM712=m
# CONFIG_FB_OMAP2 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_QCOM_WLED=m
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_TPS65217=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_VGASTATE=m
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_CTL_FAST_LOOKUP is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
# CONFIG_SND_CTL_DEBUG is not set
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=m
CONFIG_SND_SOC_ADI=m
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_AMD_ACP_CONFIG=m
CONFIG_SND_SOC_APPLE_MCA=m
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_BCM2835_SOC_I2S is not set
# CONFIG_SND_SOC_CYGNUS is not set
CONFIG_SND_BCM63XX_I2S_WHISTLER=m
# CONFIG_SND_EP93XX_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=m
# CONFIG_SND_DESIGNWARE_PCM is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
# CONFIG_SND_SOC_FSL_SPDIF is not set
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_FSL_MICFIL is not set
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_SOC_FSL_XCVR=m
# CONFIG_SND_SOC_FSL_AUD2HTX is not set
CONFIG_SND_SOC_FSL_UTILS=m
CONFIG_SND_SOC_FSL_RPMSG=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
# CONFIG_SND_JZ4740_SOC_I2S is not set
# CONFIG_SND_KIRKWOOD_SOC is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
# CONFIG_SND_SOC_MT8186 is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
# CONFIG_SND_SOC_MT8195 is not set
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
# CONFIG_SND_MESON_AXG_TDMIN is not set
# CONFIG_SND_MESON_AXG_TDMOUT is not set
# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
# CONFIG_SND_MESON_AXG_SPDIFOUT is not set
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
# CONFIG_SND_MESON_AXG_PDM is not set
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
# CONFIG_SND_MESON_G12A_TOACODEC is not set
# CONFIG_SND_MESON_G12A_TOHDMITX is not set
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
# CONFIG_SND_MXS_SOC is not set
# CONFIG_SND_PXA2XX_SOC is not set
CONFIG_SND_SOC_QCOM=m
CONFIG_SND_SOC_LPASS_CPU=m
CONFIG_SND_SOC_LPASS_PLATFORM=m
CONFIG_SND_SOC_LPASS_APQ8016=m
# CONFIG_SND_SOC_STORM is not set
CONFIG_SND_SOC_APQ8016_SBC=m
CONFIG_SND_SOC_QCOM_COMMON=m
# CONFIG_SND_SOC_SC7180 is not set
# CONFIG_SND_SOC_SC7280 is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SAMSUNG_PCM=m
# CONFIG_SND_SAMSUNG_SPDIF is not set
CONFIG_SND_SAMSUNG_I2S=m
# CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753 is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580 is not set
# CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X is not set
# CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 is not set
# CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES is not set
# CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380 is not set
# CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380 is not set
# CONFIG_SND_SOC_SMARTQ is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
# CONFIG_SND_SOC_SPEYSIDE is not set
# CONFIG_SND_SOC_TOBERMORY is not set
# CONFIG_SND_SOC_LOWLAND is not set
# CONFIG_SND_SOC_LITTLEMILL is not set
CONFIG_SND_SOC_SNOW=m
# CONFIG_SND_SOC_ODROID is not set
# CONFIG_SND_SOC_ARNDALE is not set
CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994=m
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=m
#
# SoC Audio support for Renesas SoCs
#
# CONFIG_SND_SOC_SH4_FSI is not set
# CONFIG_SND_SOC_RCAR is not set
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI=m
# CONFIG_SND_SOC_SOF_ACPI is not set
# CONFIG_SND_SOC_SOF_OF is not set
# CONFIG_SND_SOC_SOF_AMD_TOPLEVEL is not set
# CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL is not set
CONFIG_SND_SOC_SPRD=m
CONFIG_SND_SOC_SPRD_MCDT=m
# CONFIG_SND_SOC_STI is not set
#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_STM32_SAI is not set
# CONFIG_SND_SOC_STM32_I2S is not set
# CONFIG_SND_SOC_STM32_SPDIFRX is not set
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=m
CONFIG_SND_SUN8I_CODEC=m
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
CONFIG_SND_SUN50I_CODEC_ANALOG=m
# CONFIG_SND_SUN4I_I2S is not set
CONFIG_SND_SUN4I_SPDIF=m
# CONFIG_SND_SUN50I_DMIC is not set
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=m
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
#
# Texas Instruments DAI support for:
#
# CONFIG_SND_SOC_DAVINCI_ASP is not set
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
# CONFIG_SND_SOC_DAVINCI_VCIF is not set
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
CONFIG_SND_SOC_UNIPHIER=m
CONFIG_SND_SOC_UNIPHIER_AIO=m
# CONFIG_SND_SOC_UNIPHIER_LD11 is not set
CONFIG_SND_SOC_UNIPHIER_PXS2=m
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=m
CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1372_I2C is not set
# CONFIG_SND_SOC_ADAU1372_SPI is not set
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
# CONFIG_SND_SOC_ADAU7002 is not set
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4375=m
# CONFIG_SND_SOC_AK4458 is not set
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_AW8738=m
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=m
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_SPI=m
# CONFIG_SND_SOC_CS35L41_I2C is not set
CONFIG_SND_SOC_CS35L45_TABLES=m
CONFIG_SND_SOC_CS35L45=m
CONFIG_SND_SOC_CS35L45_SPI=m
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
# CONFIG_SND_SOC_CS42L83 is not set
CONFIG_SND_SOC_CS4234=m
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CX2072X=m
# CONFIG_SND_SOC_JZ4740_CODEC is not set
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
# CONFIG_SND_SOC_JZ4760_CODEC is not set
# CONFIG_SND_SOC_JZ4770_CODEC is not set
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_ES7134=m
# CONFIG_SND_SOC_ES7241 is not set
# CONFIG_SND_SOC_ES8316 is not set
# CONFIG_SND_SOC_ES8326 is not set
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
# CONFIG_SND_SOC_ES8328_SPI is not set
CONFIG_SND_SOC_GTM601=m
# CONFIG_SND_SOC_HDA is not set
# CONFIG_SND_SOC_ICS43432 is not set
CONFIG_SND_SOC_INNO_RK3036=m
# CONFIG_SND_SOC_LOCHNAGAR_SC is not set
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
# CONFIG_SND_SOC_MAX98373_SDW is not set
# CONFIG_SND_SOC_MAX98390 is not set
CONFIG_SND_SOC_MAX98396=m
CONFIG_SND_SOC_MAX9860=m
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
CONFIG_SND_SOC_PCM5102A=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RK3328 is not set
# CONFIG_SND_SOC_RK817 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
# CONFIG_SND_SOC_RT1316_SDW is not set
CONFIG_SND_SOC_RT5616=m
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
# CONFIG_SND_SOC_RT715_SDW is not set
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT9120 is not set
# CONFIG_SND_SOC_SDW_MOCKUP is not set
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
# CONFIG_SND_SOC_SIMPLE_MUX is not set
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SRC4XXX_I2C=m
CONFIG_SND_SOC_SRC4XXX=m
CONFIG_SND_SOC_SSM2305=m
# CONFIG_SND_SOC_SSM2518 is not set
CONFIG_SND_SOC_SSM2602=m
# CONFIG_SND_SOC_SSM2602_SPI is not set
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=m
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=m
# CONFIG_SND_SOC_TAS2764 is not set
# CONFIG_SND_SOC_TAS2770 is not set
# CONFIG_SND_SOC_TAS2780 is not set
# CONFIG_SND_SOC_TAS5086 is not set
CONFIG_SND_SOC_TAS571X=m
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS5805M is not set
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=m
# CONFIG_SND_SOC_TFA9879 is not set
CONFIG_SND_SOC_TFA989X=m
CONFIG_SND_SOC_TLV320ADC3XXX=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
CONFIG_SND_SOC_TLV320AIC31XX=m
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
CONFIG_SND_SOC_TLV320AIC3X_SPI=m
CONFIG_SND_SOC_TLV320ADCX140=m
# CONFIG_SND_SOC_TS3A227E is not set
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
CONFIG_SND_SOC_UDA1334=m
# CONFIG_SND_SOC_WCD9335 is not set
# CONFIG_SND_SOC_WCD934X is not set
# CONFIG_SND_SOC_WCD938X_SDW is not set
CONFIG_SND_SOC_WM8510=m
# CONFIG_SND_SOC_WM8523 is not set
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
# CONFIG_SND_SOC_WM8711 is not set
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
# CONFIG_SND_SOC_WM8731_SPI is not set
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WSA881X=m
# CONFIG_SND_SOC_WSA883X is not set
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_MAX9759=m
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_MT6660 is not set
CONFIG_SND_SOC_NAU8315=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
# CONFIG_SND_SOC_NAU8824 is not set
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
CONFIG_SND_SOC_LPASS_RX_MACRO=m
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SND_AUDIO_GRAPH_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
CONFIG_SND_TEST_COMPONENT=m
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
#
# HID support
#
# CONFIG_HID is not set
#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_PRODUCTLIST=y
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_BRCMSTB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_FSL=m
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
CONFIG_USB_EHCI_HCD_ORION=y
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
CONFIG_USB_CDNS_SUPPORT=m
CONFIG_USB_CDNS3=m
CONFIG_USB_CDNS3_GADGET=y
# CONFIG_USB_CDNS3_HOST is not set
CONFIG_USB_CDNS3_TI=m
CONFIG_USB_CDNS3_IMX=m
# CONFIG_USB_MTU3 is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=m
CONFIG_USB_DWC3_EXYNOS=m
CONFIG_USB_DWC3_KEYSTONE=m
CONFIG_USB_DWC3_MESON_G12A=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC3_ST=m
CONFIG_USB_DWC3_QCOM=m
CONFIG_USB_DWC3_IMX8MP=m
# CONFIG_USB_DWC3_AM62 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
# CONFIG_USB_DWC2_DEBUG_PERIODIC is not set
# CONFIG_USB_CHIPIDEA is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
CONFIG_USB_ISP1760_GADGET_ROLE=y
# CONFIG_USB_ISP1760_DUAL_ROLE is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=y
# CONFIG_BRCM_USB_PINMAP is not set
CONFIG_USB_ONBOARD_HUB=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_USB_GPIO_VBUS=m
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=m
# CONFIG_USB_TEGRA_PHY is not set
# CONFIG_USB_ULPI is not set
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
# CONFIG_USB_RENESAS_USB3 is not set
# CONFIG_USB_PXA27X is not set
CONFIG_USB_MV_UDC=m
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_SNP_CORE=m
CONFIG_USB_SNP_UDC_PLAT=m
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_NET2272=m
# CONFIG_USB_NET2272_DMA is not set
# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_MAX3420_UDC=m
# CONFIG_USB_ASPEED_UDC is not set
# CONFIG_USB_ASPEED_VHUB is not set
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC1_LEGACY=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
# CONFIG_USB_CONFIGFS_F_TCM is not set
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_G_HID=m
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_QCOM_DML=y
# CONFIG_MMC_STM32_SDMMC is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_OMAP_HS is not set
CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_DAVINCI is not set
CONFIG_MMC_SPI=m
# CONFIG_MMC_S3C is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_TMIO_CORE=y
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
CONFIG_MMC_UNIPHIER=y
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_CAVIUM_THUNDERX=m
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_BLUEFIELD=m
# CONFIG_MMC_DW_EXYNOS is not set
# CONFIG_MMC_DW_HI3798CV200 is not set
CONFIG_MMC_DW_K3=m
# CONFIG_MMC_DW_PCI is not set
# CONFIG_MMC_SH_MMCIF is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=y
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=y
# CONFIG_MMC_OWL is not set
CONFIG_MMC_LITEX=y
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=m
# CONFIG_MEMSTICK_REALTEK_USB is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CLASS_FLASH=m
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_AN30259A=m
# CONFIG_LEDS_ARIEL is not set
CONFIG_LEDS_AW2013=m
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=m
# CONFIG_LEDS_CR0014114 is not set
CONFIG_LEDS_EL15203000=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_MT6323=m
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
CONFIG_LEDS_LP8860=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX77650=m
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_IS31FL319X=m
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=m
CONFIG_LEDS_SPI_BYTE=m
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
# CONFIG_LEDS_AAT1290 is not set
# CONFIG_LEDS_AS3645A is not set
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_RT4505=m
CONFIG_LEDS_RT8515=m
CONFIG_LEDS_SGM3140=m
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_PATTERN=m
# CONFIG_LEDS_TRIGGER_AUDIO is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_LIB_KUNIT_TEST is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
CONFIG_RTC_DRV_MAX6900=m
# CONFIG_RTC_DRV_MAX8907 is not set
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_NCT3018Y=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_ISL12026=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_RC5T619 is not set
CONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
CONFIG_RTC_DRV_M41T94=m
# CONFIG_RTC_DRV_DS1302 is not set
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
# CONFIG_RTC_DRV_DS1347 is not set
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=m
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
CONFIG_RTC_DRV_RX6110=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
# CONFIG_RTC_DRV_DA9063 is not set
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not set
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_ZYNQMP=m
# CONFIG_RTC_DRV_NTXEC is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
CONFIG_RTC_DRV_PL030=y
CONFIG_RTC_DRV_PL031=y
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
CONFIG_RTC_DRV_MV=m
# CONFIG_RTC_DRV_ARMADA38X is not set
CONFIG_RTC_DRV_CADENCE=m
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_STMP is not set
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=m
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
CONFIG_RTC_DRV_R7301=m
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_ASPEED is not set
CONFIG_RTC_DRV_TI_K3=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=m
# CONFIG_AMBA_PL08X is not set
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_BCM_SBA_RAID is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
CONFIG_DMA_SUN6I=y
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
CONFIG_FSL_EDMA=m
CONFIG_FSL_QDMA=y
CONFIG_HISI_DMA=y
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
CONFIG_MV_XOR_V2=y
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_PL330_DMA is not set
CONFIG_PLX_DMA=y
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
CONFIG_SPRD_DMA=m
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA186_GPC_DMA is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_UNIPHIER_MDMAC=m
# CONFIG_UNIPHIER_XDMAC is not set
CONFIG_XGENE_DMA=y
CONFIG_XILINX_DMA=y
CONFIG_XILINX_ZYNQMP_DMA=y
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GPI_DMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_SF_PDMA=m
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_K3_UDMA=y
CONFIG_TI_K3_UDMA_GLUE_LAYER=y
CONFIG_TI_K3_PSIL=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_LINEDISP=m
CONFIG_HD44780_COMMON=m
CONFIG_HD44780=m
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=m
CONFIG_HT16K33=m
CONFIG_LCD2S=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=m
# CONFIG_UIO is not set
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_SCSI=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
# CONFIG_COMEDI_NI_DAQ_700_CS is not set
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
# CONFIG_COMEDI_NI_MIO_CS is not set
# CONFIG_COMEDI_QUATECH_DAQP_CS is not set
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
# CONFIG_RTS5208 is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=m
# CONFIG_ADIS16240 is not set
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=y
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
CONFIG_AD9834=y
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
CONFIG_AD2S1210=m
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_FB_SM750=m
# CONFIG_USB_EMXX is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_BOARD is not set
CONFIG_FB_TFT=m
# CONFIG_FB_TFT_AGM1264K_FL is not set
CONFIG_FB_TFT_BD663474=m
# CONFIG_FB_TFT_HX8340BN is not set
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
# CONFIG_FB_TFT_ILI9325 is not set
# CONFIG_FB_TFT_ILI9340 is not set
# CONFIG_FB_TFT_ILI9341 is not set
# CONFIG_FB_TFT_ILI9481 is not set
# CONFIG_FB_TFT_ILI9486 is not set
CONFIG_FB_TFT_PCD8544=m
# CONFIG_FB_TFT_RA8875 is not set
CONFIG_FB_TFT_S6D02A1=m
# CONFIG_FB_TFT_S6D1121 is not set
CONFIG_FB_TFT_SEPS525=m
CONFIG_FB_TFT_SH1106=m
# CONFIG_FB_TFT_SSD1289 is not set
# CONFIG_FB_TFT_SSD1305 is not set
# CONFIG_FB_TFT_SSD1306 is not set
# CONFIG_FB_TFT_SSD1331 is not set
CONFIG_FB_TFT_SSD1351=m
# CONFIG_FB_TFT_ST7735R is not set
CONFIG_FB_TFT_ST7789V=m
# CONFIG_FB_TFT_TINYLCD is not set
# CONFIG_FB_TFT_TLS8204 is not set
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_MOST_COMPONENTS=m
CONFIG_MOST_VIDEO=m
CONFIG_MOST_DIM2=m
CONFIG_MOST_I2C=m
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
# CONFIG_GREYBUS_BRIDGED_PHY is not set
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_SND_BCM2835 is not set
# CONFIG_VIDEO_BCM2835 is not set
# CONFIG_PI433 is not set
# CONFIG_XIL_AXIS_FIFO is not set
CONFIG_FIELDBUS_DEV=m
# CONFIG_HMS_ANYBUSS_BUS is not set
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_MLXREG_HOTPLUG is not set
CONFIG_MLXREG_IO=m
CONFIG_MLXREG_LC=m
CONFIG_NVSW_SN2201=m
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
# CONFIG_CLK_SP810 is not set
CONFIG_CLK_VEXPRESS_OSC=m
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=m
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI514=m
CONFIG_COMMON_CLK_SI544=m
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=m
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=y
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=m
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_STUB_CLK_HI6220 is not set
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SCI_CLK is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
CONFIG_COMMON_CLK_MT8192=y
# CONFIG_COMMON_CLK_MT8192_AUDSYS is not set
# CONFIG_COMMON_CLK_MT8192_CAMSYS is not set
# CONFIG_COMMON_CLK_MT8192_IMGSYS is not set
# CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP is not set
# CONFIG_COMMON_CLK_MT8192_IPESYS is not set
# CONFIG_COMMON_CLK_MT8192_MDPSYS is not set
# CONFIG_COMMON_CLK_MT8192_MFGCFG is not set
# CONFIG_COMMON_CLK_MT8192_MMSYS is not set
# CONFIG_COMMON_CLK_MT8192_MSDC is not set
# CONFIG_COMMON_CLK_MT8192_SCP_ADSP is not set
# CONFIG_COMMON_CLK_MT8192_VDECSYS is not set
# CONFIG_COMMON_CLK_MT8192_VENCSYS is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
# CONFIG_COMMON_CLK_AXG_AUDIO is not set
CONFIG_COMMON_CLK_G12A=y
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_CP110_SYSCON=y
# CONFIG_COMMON_CLK_PISTACHIO is not set
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=m
CONFIG_QCOM_A53PLL=m
CONFIG_QCOM_A7PLL=m
CONFIG_QCOM_CLK_APCS_MSM8916=m
CONFIG_QCOM_CLK_APCC_MSM8996=m
CONFIG_QCOM_CLK_APCS_SDX55=m
CONFIG_QCOM_CLK_SMD_RPM=m
CONFIG_APQ_GCC_8084=m
CONFIG_APQ_MMCC_8084=m
CONFIG_IPQ_APSS_PLL=m
CONFIG_IPQ_APSS_6018=m
CONFIG_IPQ_GCC_4019=m
CONFIG_IPQ_GCC_6018=m
CONFIG_IPQ_GCC_806X=m
CONFIG_IPQ_LCC_806X=m
CONFIG_IPQ_GCC_8074=m
CONFIG_MSM_GCC_8660=m
CONFIG_MSM_GCC_8909=m
CONFIG_MSM_GCC_8916=m
CONFIG_MSM_GCC_8939=m
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_LCC_8960 is not set
CONFIG_MDM_GCC_9607=m
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
# CONFIG_MSM_MMCC_8960 is not set
CONFIG_MSM_GCC_8953=m
CONFIG_MSM_GCC_8974=m
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_GCC_8976 is not set
CONFIG_MSM_MMCC_8994=m
CONFIG_MSM_GCC_8994=m
CONFIG_MSM_GCC_8996=m
CONFIG_MSM_MMCC_8996=m
CONFIG_MSM_GCC_8998=m
CONFIG_MSM_GPUCC_8998=m
CONFIG_MSM_MMCC_8998=m
CONFIG_QCM_GCC_2290=m
CONFIG_QCM_DISPCC_2290=m
CONFIG_QCS_GCC_404=m
CONFIG_SC_CAMCC_7180=m
# CONFIG_SC_CAMCC_7280 is not set
CONFIG_SC_DISPCC_7180=m
CONFIG_SC_DISPCC_7280=m
CONFIG_SC_GCC_7180=m
CONFIG_SC_GCC_7280=m
CONFIG_SC_GCC_8180X=m
CONFIG_SC_GCC_8280XP=m
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_GPUCC_7280 is not set
CONFIG_SC_GPUCC_8280XP=m
# CONFIG_SC_LPASSCC_7280 is not set
CONFIG_SC_LPASS_CORECC_7180=m
CONFIG_SC_LPASS_CORECC_7280=m
CONFIG_SC_MSS_7180=m
CONFIG_SC_VIDEOCC_7180=m
CONFIG_SC_VIDEOCC_7280=m
CONFIG_SDM_CAMCC_845=m
CONFIG_SDM_GCC_660=m
CONFIG_SDM_MMCC_660=m
CONFIG_SDM_GPUCC_660=m
CONFIG_QCS_TURING_404=m
CONFIG_QCS_Q6SSTOP_404=m
CONFIG_SDM_GCC_845=m
# CONFIG_SDM_GPUCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
CONFIG_SDM_DISPCC_845=m
# CONFIG_SDM_LPASSCC_845 is not set
CONFIG_SDX_GCC_55=m
CONFIG_SDX_GCC_65=m
CONFIG_SM_CAMCC_8250=m
# CONFIG_SM_CAMCC_8450 is not set
CONFIG_SM_DISPCC_6115=m
CONFIG_SM_DISPCC_6125=m
CONFIG_SM_DISPCC_8250=m
CONFIG_SM_DISPCC_6350=m
CONFIG_SM_DISPCC_8450=m
CONFIG_SM_GCC_6115=m
CONFIG_SM_GCC_6125=m
CONFIG_SM_GCC_6350=m
CONFIG_SM_GCC_6375=m
CONFIG_SM_GCC_8150=m
CONFIG_SM_GCC_8250=m
CONFIG_SM_GCC_8350=m
CONFIG_SM_GCC_8450=m
# CONFIG_SM_GPUCC_6350 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
CONFIG_SM_GPUCC_8350=m
CONFIG_SM_VIDEOCC_8150=m
# CONFIG_SM_VIDEOCC_8250 is not set
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_QCOM_HFPLL=m
CONFIG_KPSS_XCC=m
CONFIG_CLK_GFM_LPASS_SM8250=m
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
CONFIG_COMMON_CLK_SAMSUNG=y
# CONFIG_S3C64XX_COMMON_CLK is not set
# CONFIG_S5PV210_COMMON_CLK is not set
# CONFIG_EXYNOS_3250_COMMON_CLK is not set
# CONFIG_EXYNOS_4_COMMON_CLK is not set
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
# CONFIG_EXYNOS_5260_COMMON_CLK is not set
# CONFIG_EXYNOS_5410_COMMON_CLK is not set
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=m
CONFIG_EXYNOS_CLKOUT=y
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
CONFIG_TESLA_FSD_COMMON_CLK=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_INTEL_SOCFPGA=y
# CONFIG_CLK_INTEL_SOCFPGA32 is not set
CONFIG_CLK_INTEL_SOCFPGA64=y
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
CONFIG_COMMON_CLK_VISCONTI=y
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=m
# CONFIG_CLK_GATE_KUNIT_TEST is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
CONFIG_DW_APB_TIMER=y
CONFIG_DW_APB_TIMER_OF=y
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_ROCKCHIP_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
CONFIG_SUN4I_TIMER=y
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_KEYSTONE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
# CONFIG_FSL_ERRATUM_A008585 is not set
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
CONFIG_CLKSRC_EXYNOS_MCT=y
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
CONFIG_SPRD_TIMER=y
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_CLKSRC_IMX_GPT is not set
# CONFIG_CLKSRC_IMX_TPM is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# CONFIG_GOLDFISH_TIMER is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_APPLE_MAILBOX=m
CONFIG_ARM_MHU=y
CONFIG_ARM_MHU_V2=y
# CONFIG_IMX_MBOX is not set
CONFIG_PLATFORM_MHU=m
CONFIG_PL320_MBOX=y
CONFIG_ARMADA_37XX_RWTM_MBOX=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
CONFIG_TI_MESSAGE_MANAGER=y
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
CONFIG_QCOM_APCS_IPC=y
CONFIG_XGENE_SLIMPRO_MBOX=m
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_BCM_FLEXRM_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
CONFIG_SUN6I_MSGBOX=m
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
CONFIG_PRU_REMOTEPROC=m
# CONFIG_RCAR_REMOTEPROC is not set
CONFIG_TI_K3_DSP_REMOTEPROC=m
CONFIG_TI_K3_R5_REMOTEPROC=m
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_QCOM is not set
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
CONFIG_APPLE_PMGR_PWRSTATE=y
# CONFIG_APPLE_RTKIT is not set
CONFIG_APPLE_SART=m
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
CONFIG_SOC_BRCMSTB=y
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# CONFIG_FSL_RCPM is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=m
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_CPR=y
CONFIG_QCOM_GENI_SE=m
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
CONFIG_QCOM_KRYO_L2_ACCESSORS=y
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_RMTFS_MEM is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_RPMPD is not set
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_SPM=y
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_ASV_ARM is not set
CONFIG_EXYNOS_CHIPID=y
# CONFIG_EXYNOS_USI is not set
CONFIG_EXYNOS_PMU=y
# CONFIG_EXYNOS_PMU_ARM_DRIVERS is not set
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_EXYNOS_REGULATOR_COUPLER is not set
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_TI_SCI_PM_DOMAINS is not set
CONFIG_TI_K3_RINGACC=y
CONFIG_TI_K3_SOCINFO=y
CONFIG_TI_PRUSS=m
CONFIG_TI_SCI_INTA_MSI_DOMAIN=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=m
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=m
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ARM_PL172_MPMC is not set
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
CONFIG_FPGA_DFL_EMIF=m
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_PL353_SMC is not set
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m
#
# Accelerometers
#
CONFIG_ADIS16201=y
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
CONFIG_ADXL345=m
CONFIG_ADXL345_I2C=m
# CONFIG_ADXL345_SPI is not set
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=m
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=m
# CONFIG_ADXL367_SPI is not set
CONFIG_ADXL367_I2C=m
# CONFIG_ADXL372_SPI is not set
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA180=m
# CONFIG_BMA220 is not set
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_BMI088_ACCEL is not set
# CONFIG_DA280 is not set
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_FXLS8962AF=m
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_FXLS8962AF_SPI=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=m
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
CONFIG_MXC4005=m
# CONFIG_MXC6255 is not set
CONFIG_SCA3000=m
# CONFIG_SCA3300 is not set
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7091R5 is not set
CONFIG_AD7124=m
# CONFIG_AD7192 is not set
# CONFIG_AD7266 is not set
CONFIG_AD7280=m
# CONFIG_AD7291 is not set
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=m
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
# CONFIG_AD7768_1 is not set
CONFIG_AD7780=m
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=m
CONFIG_AD7923=m
# CONFIG_AD7949 is not set
# CONFIG_AD799X is not set
# CONFIG_AD9467 is not set
CONFIG_ADI_AXI_ADC=y
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not set
CONFIG_HI8435=m
CONFIG_HX711=y
CONFIG_INA2XX_ADC=m
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
# CONFIG_LTC2496 is not set
CONFIG_LTC2497=m
# CONFIG_MAX1027 is not set
CONFIG_MAX11100=y
CONFIG_MAX1118=y
CONFIG_MAX11205=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
# CONFIG_MAX9611 is not set
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MCP3911=y
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=m
# CONFIG_MESON_SARADC is not set
# CONFIG_MP2629_ADC is not set
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RN5T618_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=y
# CONFIG_TI_ADC084S021 is not set
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=m
# CONFIG_TI_ADS1015 is not set
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
# CONFIG_TI_ADS124S08 is not set
# CONFIG_TI_ADS131E08 is not set
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TI_TLC4541=m
CONFIG_TI_TSC2046=y
CONFIG_VF610_ADC=y
CONFIG_XILINX_XADC=m
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
CONFIG_SENSIRION_SGP30=m
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
# CONFIG_VZ89X is not set
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
# CONFIG_AD3552R is not set
CONFIG_AD5064=m
CONFIG_AD5360=y
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
# CONFIG_AD5592R is not set
CONFIG_AD5593R=m
CONFIG_AD5504=m
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC2688 is not set
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=m
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
# CONFIG_AD5761 is not set
CONFIG_AD5764=y
CONFIG_AD5766=y
CONFIG_AD5770R=m
CONFIG_AD5791=y
CONFIG_AD7293=y
CONFIG_AD7303=y
CONFIG_AD8801=m
CONFIG_DPOT_DAC=y
CONFIG_DS4424=m
# CONFIG_LPC18XX_DAC is not set
# CONFIG_LTC1660 is not set
CONFIG_LTC2632=m
# CONFIG_M62332 is not set
CONFIG_MAX517=m
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=m
# CONFIG_MCP4922 is not set
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=m
# CONFIG_TI_DAC7311 is not set
CONFIG_TI_DAC7612=m
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver
#
# Filters
#
CONFIG_ADMV8818=m
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=m
CONFIG_ADMV1013=m
# CONFIG_ADMV1014 is not set
CONFIG_ADMV4420=y
# CONFIG_ADRF6780 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=m
# CONFIG_ADXRS290 is not set
CONFIG_ADXRS450=m
# CONFIG_BMG160 is not set
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
# CONFIG_IIO_ST_GYRO_I2C_3AXIS is not set
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=m
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=y
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
# CONFIG_HTU21 is not set
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
CONFIG_ADIS16460=y
# CONFIG_ADIS16475 is not set
# CONFIG_ADIS16480 is not set
CONFIG_BMI160=y
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=y
CONFIG_BOSCH_BNO055=m
# CONFIG_BOSCH_BNO055_SERIAL is not set
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
# CONFIG_FXOS8700_I2C is not set
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
# CONFIG_AL3010 is not set
CONFIG_AL3320A=m
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_AS73211 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
CONFIG_CM32181=m
CONFIG_CM3232=m
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=m
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=m
CONFIG_IQS621_ALS=m
CONFIG_SENSORS_ISL29018=m
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_ISL29125=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR501 is not set
CONFIG_LTRF216A=m
CONFIG_LV0104CS=m
# CONFIG_MAX44000 is not set
CONFIG_MAX44009=m
# CONFIG_NOA1305 is not set
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=m
# CONFIG_TSL4531 is not set
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=m
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=y
CONFIG_MAG3110=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=y
# CONFIG_IIO_ST_MAGN_I2C_3AXIS is not set
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
# end of Inclinometer sensors
CONFIG_IIO_FORMAT_KUNIT_TEST=m
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=m
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
CONFIG_MAX5481=y
CONFIG_MAX5487=m
CONFIG_MCP4018=m
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
CONFIG_MCP41010=y
CONFIG_TPL0102=m
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_DLHL60D is not set
# CONFIG_DPS310 is not set
# CONFIG_HP03 is not set
# CONFIG_ICP10100 is not set
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
# CONFIG_MS5611_SPI is not set
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=y
CONFIG_RFD77402=m
CONFIG_SRF04=m
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=m
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
CONFIG_AD2S1200=m
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=m
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=m
CONFIG_TMP006=m
# CONFIG_TMP007 is not set
# CONFIG_TMP117 is not set
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
CONFIG_NTB_IDT=m
# CONFIG_NTB_EPF is not set
CONFIG_NTB_SWITCHTEC=m
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
# CONFIG_PWM_ATMEL_HLCDC_PWM is not set
CONFIG_PWM_ATMEL_TCB=m
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
CONFIG_PWM_CLK=m
# CONFIG_PWM_CLPS711X is not set
CONFIG_PWM_DWC=y
# CONFIG_PWM_EP93XX is not set
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=m
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
CONFIG_PWM_NTXEC=m
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=m
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
CONFIG_PWM_SAMSUNG=m
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_VISCONTI=y
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=m
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_IRQ_UNIPHIER_AIDET=y
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_QCOM_PDC=y
CONFIG_QCOM_MPM=y
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
CONFIG_TI_SCI_INTR_IRQCHIP=y
CONFIG_TI_SCI_INTA_IRQCHIP=y
CONFIG_TI_PRUSS_INTC=m
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
CONFIG_APPLE_AIC=y
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=m
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=m
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RESET_TI_TPS380X=m
# CONFIG_RESET_TN48M_CPLD is not set
CONFIG_RESET_UNIPHIER=m
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
CONFIG_PHY_XGENE=y
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_SUN6I_MIPI_DPHY=m
CONFIG_PHY_SUN9I_USB=m
CONFIG_PHY_SUN50I_USB3=m
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=m
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=m
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=m
CONFIG_PHY_MVEBU_CP110_COMPHY=m
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
CONFIG_PHY_SPARX5_SERDES=m
CONFIG_PHY_LAN966X_SERDES=m
# CONFIG_PHY_CPCAP_USB is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=m
CONFIG_PHY_QCOM_APQ8064_SATA=m
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=m
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
CONFIG_PHY_QCOM_PCIE2=m
# CONFIG_PHY_QCOM_QMP is not set
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
CONFIG_PHY_QCOM_USB_HS_28NM=m
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=y
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_S5PV210_USB2 is not set
# CONFIG_PHY_EXYNOS5_USBDRD is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
CONFIG_PHY_UNIPHIER_USB3=m
CONFIG_PHY_UNIPHIER_PCIE=y
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_DM816X_USB is not set
CONFIG_PHY_AM654_SERDES=y
# CONFIG_PHY_J721E_WIZ is not set
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_OMAP_USB2=y
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# CONFIG_ARM_CCI_PMU is not set
CONFIG_ARM_CCN=m
CONFIG_ARM_CMN=y
# CONFIG_ARM_PMU is not set
# CONFIG_ARM_SMMU_V3_PMU is not set
CONFIG_ARM_DSU_PMU=y
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
# CONFIG_ARM_SPE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
CONFIG_MARVELL_CN10K_TAD_PMU=m
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_HISI_PCIE_PMU is not set
# CONFIG_HNS3_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android
CONFIG_DAX=m
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPRD_EFUSE=m
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_SUNXI_SID=m
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
# CONFIG_STM_SOURCE_HEARTBEAT is not set
CONFIG_STM_SOURCE_FTRACE=m
# CONFIG_INTEL_TH is not set
CONFIG_HISI_PTT=y
# end of HW tracing support
CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=m
# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set
CONFIG_FPGA_MGR_ALTERA_CVP=y
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
# CONFIG_FPGA_MGR_XILINX_SPI is not set
# CONFIG_FPGA_MGR_ICE40_SPI is not set
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=y
CONFIG_SOCFPGA_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=m
# CONFIG_FPGA_DFL_FME is not set
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=m
CONFIG_FPGA_DFL_PCI=m
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
CONFIG_FPGA_MGR_MICROCHIP_SPI=y
# CONFIG_FSI is not set
CONFIG_TEE=y
# CONFIG_OPTEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not set
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
# CONFIG_FTM_QUADDEC is not set
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
CONFIG_INTEL_QEP=m
CONFIG_TI_ECAP_CAPTURE=m
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=m
CONFIG_PECI=y
CONFIG_PECI_CPU=y
# CONFIG_PECI_ASPEED is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
# CONFIG_F2FS_FS_LZORLE is not set
# CONFIG_F2FS_FS_LZ4 is not set
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=m
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=m
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_TRUSTED_KEYS_TPM=y
# CONFIG_TRUSTED_KEYS_TEE is not set
CONFIG_ENCRYPTED_KEYS=m
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_GCC_PLUGIN_STACKLEAK=y
CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
# CONFIG_STACKLEAK_METRICS is not set
# CONFIG_STACKLEAK_RUNTIME_DISABLE is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization
# CONFIG_RANDSTRUCT_NONE is not set
# CONFIG_RANDSTRUCT_FULL is not set
CONFIG_RANDSTRUCT_PERFORMANCE=y
CONFIG_RANDSTRUCT=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=m
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLYVAL=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_NHPOLY1305_NEON=y
CONFIG_CRYPTO_CHACHA20_NEON=y
#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
# CONFIG_CRYPTO_GHASH_ARM64_CE is not set
CONFIG_CRYPTO_POLY1305_NEON=y
CONFIG_CRYPTO_SHA1_ARM64_CE=m
CONFIG_CRYPTO_SHA256_ARM64=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_SHA512_ARM64=y
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=y
CONFIG_CRYPTO_SM3_ARM64_CE=m
CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64=y
CONFIG_CRYPTO_AES_ARM64_CE=y
# CONFIG_CRYPTO_AES_ARM64_CE_BLK is not set
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_BS=y
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
CONFIG_CRYPTO_SM4_ARM64_CE_BLK=m
CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
# end of Accelerated Cryptographic Algorithms for CPU (arm64)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN4I_SS=m
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set
CONFIG_CRYPTO_DEV_SUN8I_CE=y
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_HASH is not set
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
# CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG is not set
# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
# CONFIG_CRYPTO_DEV_SL3516 is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_CPT=y
CONFIG_CAVIUM_CPT=y
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
CONFIG_CRYPTO_DEV_MARVELL=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_DEV_OCTEONTX_CPT=y
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=m
# CONFIG_CRYPTO_DEV_QCE is not set
CONFIG_CRYPTO_DEV_QCOM_RNG=y
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
CONFIG_CRYPTO_DEV_CCREE=m
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_CRYPTO_DEV_SA2UL=y
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
CONFIG_FIPS_SIGNATURE_SELFTEST=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
# CONFIG_INDIRECT_PIO is not set
CONFIG_TRACE_MMIO_ACCESS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=m
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_ASN1_ENCODER=m
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
# CONFIG_UBSAN_UNREACHABLE is not set
# CONFIG_UBSAN_BOOL is not set
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_LIST is not set
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_ARM64_RELOC_TEST is not set
CONFIG_CORESIGHT=m
CONFIG_CORESIGHT_LINKS_AND_SINKS=m
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=m
CONFIG_CORESIGHT_CATU=m
CONFIG_CORESIGHT_SINK_TPIU=m
CONFIG_CORESIGHT_SINK_ETBV10=m
CONFIG_CORESIGHT_SOURCE_ETM4X=m
CONFIG_ETM4X_IMPDEF_FEATURE=y
CONFIG_CORESIGHT_STM=m
CONFIG_CORESIGHT_CPU_DEBUG=m
CONFIG_CORESIGHT_CPU_DEBUG_DEFAULT_ON=y
# CONFIG_CORESIGHT_CTI is not set
# CONFIG_CORESIGHT_TRBE is not set
CONFIG_ULTRASOC_SMB=m
# end of arm64 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
# CONFIG_KUNIT_DEBUGFS is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
CONFIG_KUNIT_ALL_TESTS=m
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=m
CONFIG_TEST_LIST_SORT=m
CONFIG_TEST_MIN_HEAP=m
CONFIG_TEST_SORT=m
CONFIG_TEST_DIV64=m
CONFIG_KPROBES_SANITY_TEST=m
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_TEST_REF_TRACKER=y
# CONFIG_RBTREE_TEST is not set
CONFIG_REED_SOLOMON_TEST=m
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
CONFIG_STRING_SELFTEST=m
CONFIG_TEST_STRING_HELPERS=y
# CONFIG_TEST_STRSCPY is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
# CONFIG_TEST_SCANF is not set
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_XARRAY=y
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
CONFIG_TEST_IDA=m
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_FIND_BIT_BENCHMARK=m
# CONFIG_TEST_FIRMWARE is not set
CONFIG_BITFIELD_KUNIT=m
CONFIG_HASH_KUNIT_TEST=m
# CONFIG_RESOURCE_KUNIT_TEST is not set
# CONFIG_SYSCTL_KUNIT_TEST is not set
CONFIG_LIST_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
# CONFIG_CMDLINE_KUNIT_TEST is not set
# CONFIG_BITS_TEST is not set
# CONFIG_RATIONAL_KUNIT_TEST is not set
# CONFIG_MEMCPY_KUNIT_TEST is not set
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=m
CONFIG_STACKINIT_KUNIT_TEST=m
CONFIG_FORTIFY_KUNIT_TEST=m
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DEBUG_VIRTUAL is not set
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_MEMINIT=m
CONFIG_TEST_FREE_PAGES=m
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
2022-11-10 12:08 ` Yicong Yang
@ 2022-11-12 10:06 ` hejunhao
-1 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-12 10:06 UTC (permalink / raw)
To: Yicong Yang, mathieu.poirier, suzuki.poulose, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
Hi Yicong.
On 2022/11/10 20:08, Yicong Yang wrote:
> On 2022/11/9 21:50, Junhao He wrote:
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <liuqi115@huawei.com>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
>
> btw, you need to cc linux-doc@vger.kernel.org.
>
> Thanks.
"MEM_RESERVE" is a macro. will update the doc and add cc.
Thanks for the comments!
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
>>
> .
>
Best regards,
Junhao.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers
@ 2022-11-12 10:06 ` hejunhao
0 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-12 10:06 UTC (permalink / raw)
To: Yicong Yang, mathieu.poirier, suzuki.poulose, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: yangyicong, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
Hi Yicong.
On 2022/11/10 20:08, Yicong Yang wrote:
> On 2022/11/9 21:50, Junhao He wrote:
>> From: Qi Liu <liuqi115@huawei.com>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <liuqi115@huawei.com>
>> Signed-off-by: Junhao He <hejunhao3@huawei.com>
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <hejunhao3@huawei.com>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <liuqi115@huawei.com>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
>
> btw, you need to cc linux-doc@vger.kernel.org.
>
> Thanks.
"MEM_RESERVE" is a macro. will update the doc and add cc.
Thanks for the comments!
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
>>
> .
>
Best regards,
Junhao.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-11 22:06 ` kernel test robot
@ 2022-11-14 10:49 ` Suzuki K Poulose
0 siblings, 0 replies; 30+ messages in thread
From: Suzuki K Poulose @ 2022-11-14 10:49 UTC (permalink / raw)
To: kernel test robot, Junhao He, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 11/11/2022 22:06, kernel test robot wrote:
> Hi Junhao,
>
> I love your patch! Perhaps something to improve:
>
> [auto build test WARNING on soc/for-next]
> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
> patch link: https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
> config: arm64-randconfig-s033-20221111
> compiler: aarch64-linux-gcc (GCC) 12.1.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # apt-get install sparse
> # sparse version: v0.6.4-39-gce1a6720-dirty
> # https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
> git remote add linux-review https://github.com/intel-lab-lkp/linux
> git fetch --no-tags linux-review Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
> git checkout 49ede03fd874b65deca5382ea84c3377188136da
> # save the config file
> mkdir build_dir && cp config build_dir/.config
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
>
> sparse warnings: (new ones prefixed by >>)
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse: cast removes address space '__iomem' of expression
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void [noderef] __iomem *base @@ got void * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: expected void [noderef] __iomem *base
> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got void *
>
> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>
> 89
> 90 static ssize_t smb_read(struct file *file, char __user *data, size_t len,
> 91 loff_t *ppos)
> 92 {
> 93 struct smb_drv_data *drvdata = container_of(file->private_data,
> 94 struct smb_drv_data, miscdev);
> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
> 96 struct device *dev = &drvdata->csdev->dev;
> 97 ssize_t to_copy = 0;
> 98
> 99 mutex_lock(&drvdata->mutex);
> 100
> 101 if (!sdb->data_size) {
> 102 smb_update_data_size(drvdata);
> 103 if (!sdb->data_size)
> 104 goto out;
> 105 }
> 106
> 107 to_copy = min(sdb->data_size, len);
> 108
> 109 /* Copy parts of trace data when read pointer wrap around SMB buffer */
> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
> 111 to_copy = sdb->buf_size - sdb->rd_offset;
> 112
> > 113 if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
> 114 to_copy)) {
> 115 dev_dbg(dev, "Failed to copy data to user\n");
> 116 to_copy = -EFAULT;
> 117 goto out;
> 118 }
> 119
Please could we replace this with copy_to_user_fromio() ?
Suzuki
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-14 10:49 ` Suzuki K Poulose
0 siblings, 0 replies; 30+ messages in thread
From: Suzuki K Poulose @ 2022-11-14 10:49 UTC (permalink / raw)
To: kernel test robot, Junhao He, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 11/11/2022 22:06, kernel test robot wrote:
> Hi Junhao,
>
> I love your patch! Perhaps something to improve:
>
> [auto build test WARNING on soc/for-next]
> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
> patch link: https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
> config: arm64-randconfig-s033-20221111
> compiler: aarch64-linux-gcc (GCC) 12.1.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # apt-get install sparse
> # sparse version: v0.6.4-39-gce1a6720-dirty
> # https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
> git remote add linux-review https://github.com/intel-lab-lkp/linux
> git fetch --no-tags linux-review Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
> git checkout 49ede03fd874b65deca5382ea84c3377188136da
> # save the config file
> mkdir build_dir && cp config build_dir/.config
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
>
> sparse warnings: (new ones prefixed by >>)
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse: cast removes address space '__iomem' of expression
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const * @@ got void [noderef] __iomem * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: expected void const *
> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void [noderef] __iomem *base @@ got void * @@
> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: expected void [noderef] __iomem *base
> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got void *
>
> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>
> 89
> 90 static ssize_t smb_read(struct file *file, char __user *data, size_t len,
> 91 loff_t *ppos)
> 92 {
> 93 struct smb_drv_data *drvdata = container_of(file->private_data,
> 94 struct smb_drv_data, miscdev);
> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
> 96 struct device *dev = &drvdata->csdev->dev;
> 97 ssize_t to_copy = 0;
> 98
> 99 mutex_lock(&drvdata->mutex);
> 100
> 101 if (!sdb->data_size) {
> 102 smb_update_data_size(drvdata);
> 103 if (!sdb->data_size)
> 104 goto out;
> 105 }
> 106
> 107 to_copy = min(sdb->data_size, len);
> 108
> 109 /* Copy parts of trace data when read pointer wrap around SMB buffer */
> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
> 111 to_copy = sdb->buf_size - sdb->rd_offset;
> 112
> > 113 if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset,
> 114 to_copy)) {
> 115 dev_dbg(dev, "Failed to copy data to user\n");
> 116 to_copy = -EFAULT;
> 117 goto out;
> 118 }
> 119
Please could we replace this with copy_to_user_fromio() ?
Suzuki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-14 10:49 ` Suzuki K Poulose
@ 2022-11-14 13:06 ` hejunhao
-1 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-14 13:06 UTC (permalink / raw)
To: Suzuki K Poulose, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/14 18:49, Suzuki K Poulose wrote:
> On 11/11/2022 22:06, kernel test robot wrote:
>> Hi Junhao,
>>
>> I love your patch! Perhaps something to improve:
>>
>> [auto build test WARNING on soc/for-next]
>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>
>> url:
>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>> for-next
>> patch link:
>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System
>> Memory Buffer driver
>> config: arm64-randconfig-s033-20221111
>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>> reproduce:
>> wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>> -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> # apt-get install sparse
>> # sparse version: v0.6.4-39-gce1a6720-dirty
>> #
>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>> git remote add linux-review
>> https://github.com/intel-lab-lkp/linux
>> git fetch --no-tags linux-review
>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>> # save the config file
>> mkdir build_dir && cp config build_dir/.config
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>
>> If you fix the issue, kindly add following tag where applicable
>> | Reported-by: kernel test robot <lkp@intel.com>
>>
>> sparse warnings: (new ones prefixed by >>)
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse:
>>>> cast removes address space '__iomem' of expression
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>> incorrect type in argument 1 (different address spaces) @@
>>>> expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>> incorrect type in argument 1 (different address spaces) @@
>>>> expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> sparse: incorrect type in argument 2 (different address spaces)
>> @@ expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse:
>>>> incorrect type in assignment (different address spaces) @@
>>>> expected void [noderef] __iomem *base @@ got void * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>> expected void [noderef] __iomem *base
>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>> got void *
>>
>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>
>> 89
>> 90 static ssize_t smb_read(struct file *file, char __user
>> *data, size_t len,
>> 91 loff_t *ppos)
>> 92 {
>> 93 struct smb_drv_data *drvdata =
>> container_of(file->private_data,
>> 94 struct smb_drv_data, miscdev);
>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>> 96 struct device *dev = &drvdata->csdev->dev;
>> 97 ssize_t to_copy = 0;
>> 98
>> 99 mutex_lock(&drvdata->mutex);
>> 100
>> 101 if (!sdb->data_size) {
>> 102 smb_update_data_size(drvdata);
>> 103 if (!sdb->data_size)
>> 104 goto out;
>> 105 }
>> 106
>> 107 to_copy = min(sdb->data_size, len);
>> 108
>> 109 /* Copy parts of trace data when read pointer wrap
>> around SMB buffer */
>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>> 112
>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>> sdb->rd_offset,
>> 114 to_copy)) {
>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>> 116 to_copy = -EFAULT;
>> 117 goto out;
>> 118 }
>> 119
>
> Please could we replace this with copy_to_user_fromio() ?
>
> Suzuki
>
> _______________________________________________
> CoreSight mailing list -- coresight@lists.linaro.org
> To unsubscribe send an email to coresight-leave@lists.linaro.org
> .
>
Hi Suzuki,
This is a cache memory, due to improper use of "__iomem" , the sparse
generates warnings.
I has fix it in v13.
https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
Best regards,
Junhao.
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-14 13:06 ` hejunhao
0 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-14 13:06 UTC (permalink / raw)
To: Suzuki K Poulose, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/14 18:49, Suzuki K Poulose wrote:
> On 11/11/2022 22:06, kernel test robot wrote:
>> Hi Junhao,
>>
>> I love your patch! Perhaps something to improve:
>>
>> [auto build test WARNING on soc/for-next]
>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>
>> url:
>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>> for-next
>> patch link:
>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System
>> Memory Buffer driver
>> config: arm64-randconfig-s033-20221111
>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>> reproduce:
>> wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>> -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> # apt-get install sparse
>> # sparse version: v0.6.4-39-gce1a6720-dirty
>> #
>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>> git remote add linux-review
>> https://github.com/intel-lab-lkp/linux
>> git fetch --no-tags linux-review
>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>> # save the config file
>> mkdir build_dir && cp config build_dir/.config
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>
>> If you fix the issue, kindly add following tag where applicable
>> | Reported-by: kernel test robot <lkp@intel.com>
>>
>> sparse warnings: (new ones prefixed by >>)
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse:
>>>> cast removes address space '__iomem' of expression
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>> incorrect type in argument 1 (different address spaces) @@
>>>> expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>> incorrect type in argument 1 (different address spaces) @@
>>>> expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> sparse: incorrect type in argument 2 (different address spaces)
>> @@ expected void const * @@ got void [noderef] __iomem * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> expected void const *
>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>> got void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse:
>>>> incorrect type in assignment (different address spaces) @@
>>>> expected void [noderef] __iomem *base @@ got void * @@
>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>> expected void [noderef] __iomem *base
>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>> got void *
>>
>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>
>> 89
>> 90 static ssize_t smb_read(struct file *file, char __user
>> *data, size_t len,
>> 91 loff_t *ppos)
>> 92 {
>> 93 struct smb_drv_data *drvdata =
>> container_of(file->private_data,
>> 94 struct smb_drv_data, miscdev);
>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>> 96 struct device *dev = &drvdata->csdev->dev;
>> 97 ssize_t to_copy = 0;
>> 98
>> 99 mutex_lock(&drvdata->mutex);
>> 100
>> 101 if (!sdb->data_size) {
>> 102 smb_update_data_size(drvdata);
>> 103 if (!sdb->data_size)
>> 104 goto out;
>> 105 }
>> 106
>> 107 to_copy = min(sdb->data_size, len);
>> 108
>> 109 /* Copy parts of trace data when read pointer wrap
>> around SMB buffer */
>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>> 112
>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>> sdb->rd_offset,
>> 114 to_copy)) {
>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>> 116 to_copy = -EFAULT;
>> 117 goto out;
>> 118 }
>> 119
>
> Please could we replace this with copy_to_user_fromio() ?
>
> Suzuki
>
> _______________________________________________
> CoreSight mailing list -- coresight@lists.linaro.org
> To unsubscribe send an email to coresight-leave@lists.linaro.org
> .
>
Hi Suzuki,
This is a cache memory, due to improper use of "__iomem" , the sparse
generates warnings.
I has fix it in v13.
https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
Best regards,
Junhao.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-14 13:06 ` hejunhao
@ 2022-11-14 13:59 ` Suzuki K Poulose
-1 siblings, 0 replies; 30+ messages in thread
From: Suzuki K Poulose @ 2022-11-14 13:59 UTC (permalink / raw)
To: hejunhao, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 14/11/2022 13:06, hejunhao wrote:
>
>
> On 2022/11/14 18:49, Suzuki K Poulose wrote:
>> On 11/11/2022 22:06, kernel test robot wrote:
>>> Hi Junhao,
>>>
>>> I love your patch! Perhaps something to improve:
>>>
>>> [auto build test WARNING on soc/for-next]
>>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>>> And when submitting patch, we suggest to use '--base' as documented in
>>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>>
>>> url:
>>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>>> for-next
>>> patch link:
>>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System
>>> Memory Buffer driver
>>> config: arm64-randconfig-s033-20221111
>>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>>> reproduce:
>>> wget
>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>> chmod +x ~/bin/make.cross
>>> # apt-get install sparse
>>> # sparse version: v0.6.4-39-gce1a6720-dirty
>>> #
>>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>>> git remote add linux-review
>>> https://github.com/intel-lab-lkp/linux
>>> git fetch --no-tags linux-review
>>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>>> # save the config file
>>> mkdir build_dir && cp config build_dir/.config
>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>>
>>> If you fix the issue, kindly add following tag where applicable
>>> | Reported-by: kernel test robot <lkp@intel.com>
>>>
>>> sparse warnings: (new ones prefixed by >>)
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse:
>>>>> cast removes address space '__iomem' of expression
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>>> incorrect type in argument 1 (different address spaces) @@ expected
>>>>> void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>>> incorrect type in argument 1 (different address spaces) @@ expected
>>>>> void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> sparse: incorrect type in argument 2 (different address spaces)
>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse:
>>>>> incorrect type in assignment (different address spaces) @@ expected
>>>>> void [noderef] __iomem *base @@ got void * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>> expected void [noderef] __iomem *base
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got
>>> void *
>>>
>>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>>
>>> 89
>>> 90 static ssize_t smb_read(struct file *file, char __user
>>> *data, size_t len,
>>> 91 loff_t *ppos)
>>> 92 {
>>> 93 struct smb_drv_data *drvdata =
>>> container_of(file->private_data,
>>> 94 struct smb_drv_data, miscdev);
>>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>>> 96 struct device *dev = &drvdata->csdev->dev;
>>> 97 ssize_t to_copy = 0;
>>> 98
>>> 99 mutex_lock(&drvdata->mutex);
>>> 100
>>> 101 if (!sdb->data_size) {
>>> 102 smb_update_data_size(drvdata);
>>> 103 if (!sdb->data_size)
>>> 104 goto out;
>>> 105 }
>>> 106
>>> 107 to_copy = min(sdb->data_size, len);
>>> 108
>>> 109 /* Copy parts of trace data when read pointer wrap
>>> around SMB buffer */
>>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>>> 112
>>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>>> sdb->rd_offset,
>>> 114 to_copy)) {
>>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>>> 116 to_copy = -EFAULT;
>>> 117 goto out;
>>> 118 }
>>> 119
>>
>> Please could we replace this with copy_to_user_fromio() ?
>>
>> Suzuki
>>
>> _______________________________________________
>> CoreSight mailing list -- coresight@lists.linaro.org
>> To unsubscribe send an email to coresight-leave@lists.linaro.org
>> .
>>
> Hi Suzuki,
>
> This is a cache memory, due to improper use of "__iomem" , the sparse
> generates warnings.
> I has fix it in v13.
> https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
I don't see a ChangeLog mentioning that this change. Please make sure
you accurately describe the changes (especially fixes like these).
Thanks
Suzuki
>
> Best regards,
> Junhao.
>
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-14 13:59 ` Suzuki K Poulose
0 siblings, 0 replies; 30+ messages in thread
From: Suzuki K Poulose @ 2022-11-14 13:59 UTC (permalink / raw)
To: hejunhao, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 14/11/2022 13:06, hejunhao wrote:
>
>
> On 2022/11/14 18:49, Suzuki K Poulose wrote:
>> On 11/11/2022 22:06, kernel test robot wrote:
>>> Hi Junhao,
>>>
>>> I love your patch! Perhaps something to improve:
>>>
>>> [auto build test WARNING on soc/for-next]
>>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>>> And when submitting patch, we suggest to use '--base' as documented in
>>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>>
>>> url:
>>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>>> for-next
>>> patch link:
>>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System
>>> Memory Buffer driver
>>> config: arm64-randconfig-s033-20221111
>>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>>> reproduce:
>>> wget
>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>> chmod +x ~/bin/make.cross
>>> # apt-get install sparse
>>> # sparse version: v0.6.4-39-gce1a6720-dirty
>>> #
>>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>>> git remote add linux-review
>>> https://github.com/intel-lab-lkp/linux
>>> git fetch --no-tags linux-review
>>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>>> # save the config file
>>> mkdir build_dir && cp config build_dir/.config
>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>>
>>> If you fix the issue, kindly add following tag where applicable
>>> | Reported-by: kernel test robot <lkp@intel.com>
>>>
>>> sparse warnings: (new ones prefixed by >>)
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse: sparse:
>>>>> cast removes address space '__iomem' of expression
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>>> incorrect type in argument 1 (different address spaces) @@ expected
>>>>> void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: sparse:
>>>>> incorrect type in argument 1 (different address spaces) @@ expected
>>>>> void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> sparse: incorrect type in argument 2 (different address spaces)
>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>> expected void const *
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>> void [noderef] __iomem *
>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: sparse:
>>>>> incorrect type in assignment (different address spaces) @@ expected
>>>>> void [noderef] __iomem *base @@ got void * @@
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>> expected void [noderef] __iomem *base
>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got
>>> void *
>>>
>>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>>
>>> 89
>>> 90 static ssize_t smb_read(struct file *file, char __user
>>> *data, size_t len,
>>> 91 loff_t *ppos)
>>> 92 {
>>> 93 struct smb_drv_data *drvdata =
>>> container_of(file->private_data,
>>> 94 struct smb_drv_data, miscdev);
>>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>>> 96 struct device *dev = &drvdata->csdev->dev;
>>> 97 ssize_t to_copy = 0;
>>> 98
>>> 99 mutex_lock(&drvdata->mutex);
>>> 100
>>> 101 if (!sdb->data_size) {
>>> 102 smb_update_data_size(drvdata);
>>> 103 if (!sdb->data_size)
>>> 104 goto out;
>>> 105 }
>>> 106
>>> 107 to_copy = min(sdb->data_size, len);
>>> 108
>>> 109 /* Copy parts of trace data when read pointer wrap
>>> around SMB buffer */
>>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>>> 112
>>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>>> sdb->rd_offset,
>>> 114 to_copy)) {
>>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>>> 116 to_copy = -EFAULT;
>>> 117 goto out;
>>> 118 }
>>> 119
>>
>> Please could we replace this with copy_to_user_fromio() ?
>>
>> Suzuki
>>
>> _______________________________________________
>> CoreSight mailing list -- coresight@lists.linaro.org
>> To unsubscribe send an email to coresight-leave@lists.linaro.org
>> .
>>
> Hi Suzuki,
>
> This is a cache memory, due to improper use of "__iomem" , the sparse
> generates warnings.
> I has fix it in v13.
> https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
I don't see a ChangeLog mentioning that this change. Please make sure
you accurately describe the changes (especially fixes like these).
Thanks
Suzuki
>
> Best regards,
> Junhao.
>
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
2022-11-14 13:59 ` Suzuki K Poulose
@ 2022-11-15 7:11 ` hejunhao
-1 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-15 7:11 UTC (permalink / raw)
To: Suzuki K Poulose, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/14 21:59, Suzuki K Poulose wrote:
> On 14/11/2022 13:06, hejunhao wrote:
>>
>>
>> On 2022/11/14 18:49, Suzuki K Poulose wrote:
>>> On 11/11/2022 22:06, kernel test robot wrote:
>>>> Hi Junhao,
>>>>
>>>> I love your patch! Perhaps something to improve:
>>>>
>>>> [auto build test WARNING on soc/for-next]
>>>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>>>> [If your patch is applied to the wrong git tree, kindly drop us a
>>>> note.
>>>> And when submitting patch, we suggest to use '--base' as documented in
>>>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>>>
>>>> url:
>>>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>>>> for-next
>>>> patch link:
>>>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>>>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc
>>>> System Memory Buffer driver
>>>> config: arm64-randconfig-s033-20221111
>>>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>>>> reproduce:
>>>> wget
>>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>>>> -O ~/bin/make.cross
>>>> chmod +x ~/bin/make.cross
>>>> # apt-get install sparse
>>>> # sparse version: v0.6.4-39-gce1a6720-dirty
>>>> #
>>>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>>>> git remote add linux-review
>>>> https://github.com/intel-lab-lkp/linux
>>>> git fetch --no-tags linux-review
>>>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>>>
>>>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>>>> # save the config file
>>>> mkdir build_dir && cp config build_dir/.config
>>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>>>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>>>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>>>
>>>> If you fix the issue, kindly add following tag where applicable
>>>> | Reported-by: kernel test robot <lkp@intel.com>
>>>>
>>>> sparse warnings: (new ones prefixed by >>)
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse:
>>>>>> sparse: cast removes address space '__iomem' of expression
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>>>> sparse: incorrect type in argument 1 (different address spaces)
>>>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>>>> sparse: incorrect type in argument 1 (different address spaces)
>>>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> sparse: incorrect type in argument 2 (different address spaces)
>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>>>>> sparse: incorrect type in assignment (different address spaces)
>>>>>> @@ expected void [noderef] __iomem *base @@ got void * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>>> expected void [noderef] __iomem *base
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got
>>>> void *
>>>>
>>>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>>>
>>>> 89
>>>> 90 static ssize_t smb_read(struct file *file, char __user
>>>> *data, size_t len,
>>>> 91 loff_t *ppos)
>>>> 92 {
>>>> 93 struct smb_drv_data *drvdata =
>>>> container_of(file->private_data,
>>>> 94 struct smb_drv_data, miscdev);
>>>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>>>> 96 struct device *dev = &drvdata->csdev->dev;
>>>> 97 ssize_t to_copy = 0;
>>>> 98
>>>> 99 mutex_lock(&drvdata->mutex);
>>>> 100
>>>> 101 if (!sdb->data_size) {
>>>> 102 smb_update_data_size(drvdata);
>>>> 103 if (!sdb->data_size)
>>>> 104 goto out;
>>>> 105 }
>>>> 106
>>>> 107 to_copy = min(sdb->data_size, len);
>>>> 108
>>>> 109 /* Copy parts of trace data when read pointer wrap
>>>> around SMB buffer */
>>>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>>>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>>>> 112
>>>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>>>> sdb->rd_offset,
>>>> 114 to_copy)) {
>>>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>>>> 116 to_copy = -EFAULT;
>>>> 117 goto out;
>>>> 118 }
>>>> 119
>>>
>>> Please could we replace this with copy_to_user_fromio() ?
>>>
>>> Suzuki
>>>
>>> _______________________________________________
>>> CoreSight mailing list -- coresight@lists.linaro.org
>>> To unsubscribe send an email to coresight-leave@lists.linaro.org
>>> .
>>>
>> Hi Suzuki,
>>
>> This is a cache memory, due to improper use of "__iomem" , the
>> sparse generates warnings.
>> I has fix it in v13.
>> https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
>>
>
> I don't see a ChangeLog mentioning that this change. Please make sure
> you accurately describe the changes (especially fixes like these).
>
> Thanks
> Suzuki
>
Hi Suzuki,
Sure, I will fill in the v13 change log.
Thanks for your comments. Any comment or suggestion is appreciated.
Best regards,
Junhao.
>>
>> Best regards,
>> Junhao.
>>
>>
>>
>
> _______________________________________________
> CoreSight mailing list -- coresight@lists.linaro.org
> To unsubscribe send an email to coresight-leave@lists.linaro.org
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver
@ 2022-11-15 7:11 ` hejunhao
0 siblings, 0 replies; 30+ messages in thread
From: hejunhao @ 2022-11-15 7:11 UTC (permalink / raw)
To: Suzuki K Poulose, kernel test robot, mathieu.poirier, mike.leach,
leo.yan, jonathan.cameron, john.garry
Cc: oe-kbuild-all, coresight, linux-kernel, linux-arm-kernel,
lpieralisi, linuxarm, liuqi115, f.fangjian, prime.zeng
On 2022/11/14 21:59, Suzuki K Poulose wrote:
> On 14/11/2022 13:06, hejunhao wrote:
>>
>>
>> On 2022/11/14 18:49, Suzuki K Poulose wrote:
>>> On 11/11/2022 22:06, kernel test robot wrote:
>>>> Hi Junhao,
>>>>
>>>> I love your patch! Perhaps something to improve:
>>>>
>>>> [auto build test WARNING on soc/for-next]
>>>> [also build test WARNING on linus/master v6.1-rc4 next-20221111]
>>>> [If your patch is applied to the wrong git tree, kindly drop us a
>>>> note.
>>>> And when submitting patch, we suggest to use '--base' as documented in
>>>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>>>
>>>> url:
>>>> https://github.com/intel-lab-lkp/linux/commits/Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>>> base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
>>>> for-next
>>>> patch link:
>>>> https://lore.kernel.org/r/20221109135008.9485-2-hejunhao3%40huawei.com
>>>> patch subject: [PATCH v12 1/2] drivers/coresight: Add UltraSoc
>>>> System Memory Buffer driver
>>>> config: arm64-randconfig-s033-20221111
>>>> compiler: aarch64-linux-gcc (GCC) 12.1.0
>>>> reproduce:
>>>> wget
>>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>>>> -O ~/bin/make.cross
>>>> chmod +x ~/bin/make.cross
>>>> # apt-get install sparse
>>>> # sparse version: v0.6.4-39-gce1a6720-dirty
>>>> #
>>>> https://github.com/intel-lab-lkp/linux/commit/49ede03fd874b65deca5382ea84c3377188136da
>>>> git remote add linux-review
>>>> https://github.com/intel-lab-lkp/linux
>>>> git fetch --no-tags linux-review
>>>> Junhao-He/Add-support-for-UltraSoc-System-Memory-Buffer/20221109-215158
>>>>
>>>> git checkout 49ede03fd874b65deca5382ea84c3377188136da
>>>> # save the config file
>>>> mkdir build_dir && cp config build_dir/.config
>>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0
>>>> make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>>>> O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/hwtracing/coresight/
>>>>
>>>> If you fix the issue, kindly add following tag where applicable
>>>> | Reported-by: kernel test robot <lkp@intel.com>
>>>>
>>>> sparse warnings: (new ones prefixed by >>)
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:113:33: sparse:
>>>>>> sparse: cast removes address space '__iomem' of expression
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>>>> sparse: incorrect type in argument 1 (different address spaces)
>>>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>>>> sparse: incorrect type in argument 1 (different address spaces)
>>>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> sparse: incorrect type in argument 2 (different address spaces)
>>>> @@ expected void const * @@ got void [noderef] __iomem * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse:
>>>> expected void const *
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:354:17: sparse: got
>>>> void [noderef] __iomem *
>>>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>>>>> sparse: incorrect type in assignment (different address spaces)
>>>>>> @@ expected void [noderef] __iomem *base @@ got void * @@
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse:
>>>> expected void [noderef] __iomem *base
>>>> drivers/hwtracing/coresight/ultrasoc-smb.c:463:14: sparse: got
>>>> void *
>>>>
>>>> vim +/__iomem +113 drivers/hwtracing/coresight/ultrasoc-smb.c
>>>>
>>>> 89
>>>> 90 static ssize_t smb_read(struct file *file, char __user
>>>> *data, size_t len,
>>>> 91 loff_t *ppos)
>>>> 92 {
>>>> 93 struct smb_drv_data *drvdata =
>>>> container_of(file->private_data,
>>>> 94 struct smb_drv_data, miscdev);
>>>> 95 struct smb_data_buffer *sdb = &drvdata->sdb;
>>>> 96 struct device *dev = &drvdata->csdev->dev;
>>>> 97 ssize_t to_copy = 0;
>>>> 98
>>>> 99 mutex_lock(&drvdata->mutex);
>>>> 100
>>>> 101 if (!sdb->data_size) {
>>>> 102 smb_update_data_size(drvdata);
>>>> 103 if (!sdb->data_size)
>>>> 104 goto out;
>>>> 105 }
>>>> 106
>>>> 107 to_copy = min(sdb->data_size, len);
>>>> 108
>>>> 109 /* Copy parts of trace data when read pointer wrap
>>>> around SMB buffer */
>>>> 110 if (sdb->rd_offset + to_copy > sdb->buf_size)
>>>> 111 to_copy = sdb->buf_size - sdb->rd_offset;
>>>> 112
>>>> > 113 if (copy_to_user(data, (void *)sdb->buf_base +
>>>> sdb->rd_offset,
>>>> 114 to_copy)) {
>>>> 115 dev_dbg(dev, "Failed to copy data to user\n");
>>>> 116 to_copy = -EFAULT;
>>>> 117 goto out;
>>>> 118 }
>>>> 119
>>>
>>> Please could we replace this with copy_to_user_fromio() ?
>>>
>>> Suzuki
>>>
>>> _______________________________________________
>>> CoreSight mailing list -- coresight@lists.linaro.org
>>> To unsubscribe send an email to coresight-leave@lists.linaro.org
>>> .
>>>
>> Hi Suzuki,
>>
>> This is a cache memory, due to improper use of "__iomem" , the
>> sparse generates warnings.
>> I has fix it in v13.
>> https://lore.kernel.org/lkml/20221114090316.63157-2-hejunhao3@huawei.com/
>>
>
> I don't see a ChangeLog mentioning that this change. Please make sure
> you accurately describe the changes (especially fixes like these).
>
> Thanks
> Suzuki
>
Hi Suzuki,
Sure, I will fill in the v13 change log.
Thanks for your comments. Any comment or suggestion is appreciated.
Best regards,
Junhao.
>>
>> Best regards,
>> Junhao.
>>
>>
>>
>
> _______________________________________________
> CoreSight mailing list -- coresight@lists.linaro.org
> To unsubscribe send an email to coresight-leave@lists.linaro.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2022-11-15 7:12 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-09 13:50 [PATCH v12 0/2] Add support for UltraSoc System Memory Buffer Junhao He
2022-11-09 13:50 ` Junhao He
2022-11-09 13:50 ` [PATCH v12 1/2] drivers/coresight: Add UltraSoc System Memory Buffer driver Junhao He
2022-11-09 13:50 ` Junhao He
2022-11-09 16:56 ` Jonathan Cameron
2022-11-09 16:56 ` Jonathan Cameron
2022-11-10 11:13 ` hejunhao
2022-11-10 11:13 ` hejunhao
2022-11-10 12:05 ` Yicong Yang
2022-11-10 12:05 ` Yicong Yang
2022-11-11 13:30 ` kernel test robot
2022-11-11 22:06 ` kernel test robot
2022-11-14 10:49 ` Suzuki K Poulose
2022-11-14 10:49 ` Suzuki K Poulose
2022-11-14 13:06 ` hejunhao
2022-11-14 13:06 ` hejunhao
2022-11-14 13:59 ` Suzuki K Poulose
2022-11-14 13:59 ` Suzuki K Poulose
2022-11-15 7:11 ` hejunhao
2022-11-15 7:11 ` hejunhao
2022-11-09 13:50 ` [PATCH v12 2/2] Documentation: Add document for UltraSoc SMB drivers Junhao He
2022-11-09 13:50 ` Junhao He
2022-11-09 16:57 ` Jonathan Cameron
2022-11-09 16:57 ` Jonathan Cameron
2022-11-10 11:20 ` hejunhao
2022-11-10 11:20 ` hejunhao
2022-11-10 12:08 ` Yicong Yang
2022-11-10 12:08 ` Yicong Yang
2022-11-12 10:06 ` hejunhao
2022-11-12 10:06 ` hejunhao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.