* [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device
@ 2014-06-25 7:14 Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Chanwoo Choi @ 2014-06-25 7:14 UTC (permalink / raw)
To: lee.jones, sbkim73, sameo, broonie
Cc: myungjoo.ham, kyungmin.park, linux-kernel, Chanwoo Choi
This patchset add Samsung S2MPU02 PMIC device driver in exiting S2MPS11 PMIC
driver because S2MPU02 has a little different between S2MPU02 and S2MPS1x.
The S2MPU02 PMIC has LDO[1-28] and BUCK[1-7] regulators.
Changes from v7:
- Add 'REGULATOR' dependency to MFD_SEC_CORE in drivers/mfd/Kconfig
- Remove unneeded simicolon
Changes from v6:
- Fix bisectable build error
- This patchset includes separate patch[1]
[1] https://lkml.org/lkml/2014/6/9/307
Changes from v5:
- Remove the duplicate code about mfd_add_devices() and regmap_add_irq_chip()
- Add acked message by Lee Jones for mfd patch on patch2
Changes from v4:
- This patchset is rebased on 'Linux 3.16-rc1'.
Changes from v3:
- Fix bug of s2mps14_regulator_set_suspend_disable()
Changes from v2:
- Change patchset name
- Remove un-necessary switch statement
- Add acked message by Mark Brown for regulator patch
- Add reviewed message by Krzysztof Kozlowski for all patchs
Changes from v1:
- Fix typo about patch description
- Use existing suspend_state variable instead of defining new variable for S2MPU02
- Remove unnecessary parameter of s2mps11_pmic_dt_parse()
- Remove unfit comment of s2mpu02.h file
- Both patch2 and patch3 should be squashed on patch2
Chanwoo Choi (4):
mfd: sec-core: Add support for S2MPU02 device
regulator: s2mps11: Add support S2MPU02 regulator device
dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC
mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption
Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +-
drivers/mfd/Kconfig | 1 +
drivers/mfd/sec-core.c | 81 +++++-
drivers/mfd/sec-irq.c | 110 ++++++--
drivers/regulator/s2mps11.c | 321 ++++++++++++++++++++--
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/irq.h | 24 ++
include/linux/mfd/samsung/s2mpu02.h | 201 ++++++++++++++
8 files changed, 693 insertions(+), 53 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mpu02.h
--
1.8.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device
2014-06-25 7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
@ 2014-06-25 7:14 ` Chanwoo Choi
2014-07-01 14:00 ` Lee Jones
2014-06-25 7:14 ` [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device Chanwoo Choi
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Chanwoo Choi @ 2014-06-25 7:14 UTC (permalink / raw)
To: lee.jones, sbkim73, sameo, broonie
Cc: myungjoo.ham, kyungmin.park, linux-kernel, Chanwoo Choi
Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
The S2MPU02 device includes PMIC/RTC/Clock devices.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/mfd/sec-core.c | 46 ++++++---
drivers/mfd/sec-irq.c | 110 +++++++++++++++++---
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/irq.h | 24 +++++
include/linux/mfd/samsung/s2mpu02.h | 201 ++++++++++++++++++++++++++++++++++++
5 files changed, 352 insertions(+), 30 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mpu02.h
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index be06d0a..15ba847 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -89,6 +89,15 @@ static const struct mfd_cell s2mpa01_devs[] = {
},
};
+static const struct mfd_cell s2mpu02_devs[] = {
+ { .name = "s2mpu02-pmic", },
+ { .name = "s2mpu02-rtc", },
+ {
+ .name = "s2mpu02-clk",
+ .of_compatible = "samsung,s2mpu02-clk",
+ }
+};
+
#ifdef CONFIG_OF
static const struct of_device_id sec_dt_match[] = {
{ .compatible = "samsung,s5m8767-pmic",
@@ -103,6 +112,9 @@ static const struct of_device_id sec_dt_match[] = {
.compatible = "samsung,s2mpa01-pmic",
.data = (void *)S2MPA01,
}, {
+ .compatible = "samsung,s2mpu02-pmic",
+ .data = (void *)S2MPU02,
+ }, {
/* Sentinel */
},
};
@@ -250,9 +262,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
{
struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
const struct regmap_config *regmap;
+ const struct mfd_cell *sec_devs;
struct sec_pmic_dev *sec_pmic;
unsigned long device_type;
- int ret;
+ int ret, num_sec_devs;
sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
GFP_KERNEL);
@@ -319,34 +332,39 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S5M8751X:
- ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
- ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
+ sec_devs = s5m8751_devs;
+ num_sec_devs = ARRAY_SIZE(s5m8751_devs);
break;
case S5M8763X:
- ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
- ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
+ sec_devs = s5m8763_devs;
+ num_sec_devs = ARRAY_SIZE(s5m8763_devs);
break;
case S5M8767X:
- ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
- ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
+ sec_devs = s5m8767_devs;
+ num_sec_devs = ARRAY_SIZE(s5m8767_devs);
break;
case S2MPA01:
- ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
- ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
+ sec_devs = s2mpa01_devs;
+ num_sec_devs = ARRAY_SIZE(s2mpa01_devs);
break;
case S2MPS11X:
- ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
- ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
+ sec_devs = s2mps11_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps11_devs);
break;
case S2MPS14X:
- ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
- ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+ sec_devs = s2mps14_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps14_devs);
+ break;
+ case S2MPU02:
+ sec_devs = s2mpu02_devs;
+ num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
break;
default:
/* If this happens the probe function is problem */
BUG();
}
-
+ ret = mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs, NULL,
+ 0, NULL);
if (ret)
goto err_mfd;
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 654e2c1..f9a5786 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -20,6 +20,7 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
@@ -161,6 +162,77 @@ static const struct regmap_irq s2mps14_irqs[] = {
},
};
+static const struct regmap_irq s2mpu02_irqs[] = {
+ [S2MPU02_IRQ_PWRONF] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_PWRONF_MASK,
+ },
+ [S2MPU02_IRQ_PWRONR] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_PWRONR_MASK,
+ },
+ [S2MPU02_IRQ_JIGONBF] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_JIGONBF_MASK,
+ },
+ [S2MPU02_IRQ_JIGONBR] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_JIGONBR_MASK,
+ },
+ [S2MPU02_IRQ_ACOKBF] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_ACOKBF_MASK,
+ },
+ [S2MPU02_IRQ_ACOKBR] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_ACOKBR_MASK,
+ },
+ [S2MPU02_IRQ_PWRON1S] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_PWRON1S_MASK,
+ },
+ [S2MPU02_IRQ_MRB] = {
+ .reg_offset = 0,
+ .mask = S2MPS11_IRQ_MRB_MASK,
+ },
+ [S2MPU02_IRQ_RTC60S] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_RTC60S_MASK,
+ },
+ [S2MPU02_IRQ_RTCA1] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_RTCA1_MASK,
+ },
+ [S2MPU02_IRQ_RTCA0] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_RTCA0_MASK,
+ },
+ [S2MPU02_IRQ_SMPL] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_SMPL_MASK,
+ },
+ [S2MPU02_IRQ_RTC1S] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_RTC1S_MASK,
+ },
+ [S2MPU02_IRQ_WTSR] = {
+ .reg_offset = 1,
+ .mask = S2MPS11_IRQ_WTSR_MASK,
+ },
+ [S2MPU02_IRQ_INT120C] = {
+ .reg_offset = 2,
+ .mask = S2MPS11_IRQ_INT120C_MASK,
+ },
+ [S2MPU02_IRQ_INT140C] = {
+ .reg_offset = 2,
+ .mask = S2MPS11_IRQ_INT140C_MASK,
+ },
+ [S2MPU02_IRQ_TSD] = {
+ .reg_offset = 2,
+ .mask = S2MPS14_IRQ_TSD_MASK,
+ },
+};
+
static const struct regmap_irq s5m8767_irqs[] = {
[S5M8767_IRQ_PWRR] = {
.reg_offset = 0,
@@ -327,6 +399,16 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
.ack_base = S2MPS14_REG_INT1,
};
+static const struct regmap_irq_chip s2mpu02_irq_chip = {
+ .name = "s2mpu02",
+ .irqs = s2mpu02_irqs,
+ .num_irqs = ARRAY_SIZE(s2mpu02_irqs),
+ .num_regs = 3,
+ .status_base = S2MPU02_REG_INT1,
+ .mask_base = S2MPU02_REG_INT1M,
+ .ack_base = S2MPU02_REG_INT1,
+};
+
static const struct regmap_irq_chip s5m8767_irq_chip = {
.name = "s5m8767",
.irqs = s5m8767_irqs,
@@ -351,6 +433,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
{
int ret = 0;
int type = sec_pmic->device_type;
+ const struct regmap_irq_chip *sec_irq_chip;
if (!sec_pmic->irq) {
dev_warn(sec_pmic->dev,
@@ -361,28 +444,19 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
switch (type) {
case S5M8763X:
- ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- sec_pmic->irq_base, &s5m8763_irq_chip,
- &sec_pmic->irq_data);
+ sec_irq_chip = &s5m8763_irq_chip;
break;
case S5M8767X:
- ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- sec_pmic->irq_base, &s5m8767_irq_chip,
- &sec_pmic->irq_data);
+ sec_irq_chip = &s5m8767_irq_chip;
break;
case S2MPS11X:
- ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- sec_pmic->irq_base, &s2mps11_irq_chip,
- &sec_pmic->irq_data);
+ sec_irq_chip = &s2mps11_irq_chip;
break;
case S2MPS14X:
- ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- sec_pmic->irq_base, &s2mps14_irq_chip,
- &sec_pmic->irq_data);
+ sec_irq_chip = &s2mps14_irq_chip;
+ break;
+ case S2MPU02:
+ sec_irq_chip = &s2mpu02_irq_chip;
break;
default:
dev_err(sec_pmic->dev, "Unknown device type %lu\n",
@@ -390,6 +464,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
return -EINVAL;
}
+ ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ sec_pmic->irq_base, sec_irq_chip,
+ &sec_pmic->irq_data);
if (ret != 0) {
dev_err(sec_pmic->dev, "Failed to register IRQ chip: %d\n", ret);
return ret;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 47d8424..b5f73de 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -21,6 +21,7 @@ enum sec_device_type {
S2MPA01,
S2MPS11X,
S2MPS14X,
+ S2MPU02,
};
/**
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index 1224f44..f35af73 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -129,6 +129,30 @@ enum s2mps14_irq {
S2MPS14_IRQ_NR,
};
+enum s2mpu02_irq {
+ S2MPU02_IRQ_PWRONF,
+ S2MPU02_IRQ_PWRONR,
+ S2MPU02_IRQ_JIGONBF,
+ S2MPU02_IRQ_JIGONBR,
+ S2MPU02_IRQ_ACOKBF,
+ S2MPU02_IRQ_ACOKBR,
+ S2MPU02_IRQ_PWRON1S,
+ S2MPU02_IRQ_MRB,
+
+ S2MPU02_IRQ_RTC60S,
+ S2MPU02_IRQ_RTCA1,
+ S2MPU02_IRQ_RTCA0,
+ S2MPU02_IRQ_SMPL,
+ S2MPU02_IRQ_RTC1S,
+ S2MPU02_IRQ_WTSR,
+
+ S2MPU02_IRQ_INT120C,
+ S2MPU02_IRQ_INT140C,
+ S2MPU02_IRQ_TSD,
+
+ S2MPU02_IRQ_NR,
+};
+
/* Masks for interrupts are the same as in s2mps11 */
#define S2MPS14_IRQ_TSD_MASK (1 << 2)
diff --git a/include/linux/mfd/samsung/s2mpu02.h b/include/linux/mfd/samsung/s2mpu02.h
new file mode 100644
index 0000000..47ae9bc
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mpu02.h
@@ -0,0 +1,201 @@
+/*
+ * s2mpu02.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPU02_H
+#define __LINUX_MFD_S2MPU02_H
+
+/* S2MPU02 registers */
+enum S2MPU02_reg {
+ S2MPU02_REG_ID,
+ S2MPU02_REG_INT1,
+ S2MPU02_REG_INT2,
+ S2MPU02_REG_INT3,
+ S2MPU02_REG_INT1M,
+ S2MPU02_REG_INT2M,
+ S2MPU02_REG_INT3M,
+ S2MPU02_REG_ST1,
+ S2MPU02_REG_ST2,
+ S2MPU02_REG_PWRONSRC,
+ S2MPU02_REG_OFFSRC,
+ S2MPU02_REG_BU_CHG,
+ S2MPU02_REG_RTCCTRL,
+ S2MPU02_REG_PMCTRL1,
+ S2MPU02_REG_RSVD1,
+ S2MPU02_REG_RSVD2,
+ S2MPU02_REG_RSVD3,
+ S2MPU02_REG_RSVD4,
+ S2MPU02_REG_RSVD5,
+ S2MPU02_REG_RSVD6,
+ S2MPU02_REG_RSVD7,
+ S2MPU02_REG_WRSTEN,
+ S2MPU02_REG_RSVD8,
+ S2MPU02_REG_RSVD9,
+ S2MPU02_REG_RSVD10,
+ S2MPU02_REG_B1CTRL1,
+ S2MPU02_REG_B1CTRL2,
+ S2MPU02_REG_B2CTRL1,
+ S2MPU02_REG_B2CTRL2,
+ S2MPU02_REG_B3CTRL1,
+ S2MPU02_REG_B3CTRL2,
+ S2MPU02_REG_B4CTRL1,
+ S2MPU02_REG_B4CTRL2,
+ S2MPU02_REG_B5CTRL1,
+ S2MPU02_REG_B5CTRL2,
+ S2MPU02_REG_B5CTRL3,
+ S2MPU02_REG_B5CTRL4,
+ S2MPU02_REG_B5CTRL5,
+ S2MPU02_REG_B6CTRL1,
+ S2MPU02_REG_B6CTRL2,
+ S2MPU02_REG_B7CTRL1,
+ S2MPU02_REG_B7CTRL2,
+ S2MPU02_REG_RAMP1,
+ S2MPU02_REG_RAMP2,
+ S2MPU02_REG_L1CTRL,
+ S2MPU02_REG_L2CTRL1,
+ S2MPU02_REG_L2CTRL2,
+ S2MPU02_REG_L2CTRL3,
+ S2MPU02_REG_L2CTRL4,
+ S2MPU02_REG_L3CTRL,
+ S2MPU02_REG_L4CTRL,
+ S2MPU02_REG_L5CTRL,
+ S2MPU02_REG_L6CTRL,
+ S2MPU02_REG_L7CTRL,
+ S2MPU02_REG_L8CTRL,
+ S2MPU02_REG_L9CTRL,
+ S2MPU02_REG_L10CTRL,
+ S2MPU02_REG_L11CTRL,
+ S2MPU02_REG_L12CTRL,
+ S2MPU02_REG_L13CTRL,
+ S2MPU02_REG_L14CTRL,
+ S2MPU02_REG_L15CTRL,
+ S2MPU02_REG_L16CTRL,
+ S2MPU02_REG_L17CTRL,
+ S2MPU02_REG_L18CTRL,
+ S2MPU02_REG_L19CTRL,
+ S2MPU02_REG_L20CTRL,
+ S2MPU02_REG_L21CTRL,
+ S2MPU02_REG_L22CTRL,
+ S2MPU02_REG_L23CTRL,
+ S2MPU02_REG_L24CTRL,
+ S2MPU02_REG_L25CTRL,
+ S2MPU02_REG_L26CTRL,
+ S2MPU02_REG_L27CTRL,
+ S2MPU02_REG_L28CTRL,
+ S2MPU02_REG_LDODSCH1,
+ S2MPU02_REG_LDODSCH2,
+ S2MPU02_REG_LDODSCH3,
+ S2MPU02_REG_LDODSCH4,
+ S2MPU02_REG_SELMIF,
+ S2MPU02_REG_RSVD11,
+ S2MPU02_REG_RSVD12,
+ S2MPU02_REG_RSVD13,
+ S2MPU02_REG_DVSSEL,
+ S2MPU02_REG_DVSPTR,
+ S2MPU02_REG_DVSDATA,
+};
+
+/* S2MPU02 regulator ids */
+enum S2MPU02_regulators {
+ S2MPU02_LDO1,
+ S2MPU02_LDO2,
+ S2MPU02_LDO3,
+ S2MPU02_LDO4,
+ S2MPU02_LDO5,
+ S2MPU02_LDO6,
+ S2MPU02_LDO7,
+ S2MPU02_LDO8,
+ S2MPU02_LDO9,
+ S2MPU02_LDO10,
+ S2MPU02_LDO11,
+ S2MPU02_LDO12,
+ S2MPU02_LDO13,
+ S2MPU02_LDO14,
+ S2MPU02_LDO15,
+ S2MPU02_LDO16,
+ S2MPU02_LDO17,
+ S2MPU02_LDO18,
+ S2MPU02_LDO19,
+ S2MPU02_LDO20,
+ S2MPU02_LDO21,
+ S2MPU02_LDO22,
+ S2MPU02_LDO23,
+ S2MPU02_LDO24,
+ S2MPU02_LDO25,
+ S2MPU02_LDO26,
+ S2MPU02_LDO27,
+ S2MPU02_LDO28,
+ S2MPU02_BUCK1,
+ S2MPU02_BUCK2,
+ S2MPU02_BUCK3,
+ S2MPU02_BUCK4,
+ S2MPU02_BUCK5,
+ S2MPU02_BUCK6,
+ S2MPU02_BUCK7,
+
+ S2MPU02_REGULATOR_MAX,
+};
+
+/* Regulator constraints for BUCKx */
+#define S2MPU02_BUCK1234_MIN_600MV 600000
+#define S2MPU02_BUCK5_MIN_1081_25MV 1081250
+#define S2MPU02_BUCK6_MIN_1700MV 1700000
+#define S2MPU02_BUCK7_MIN_900MV 900000
+
+#define S2MPU02_BUCK1234_STEP_6_25MV 6250
+#define S2MPU02_BUCK5_STEP_6_25MV 6250
+#define S2MPU02_BUCK6_STEP_2_50MV 2500
+#define S2MPU02_BUCK7_STEP_6_25MV 6250
+
+#define S2MPU02_BUCK1234_START_SEL 0x00
+#define S2MPU02_BUCK5_START_SEL 0x4D
+#define S2MPU02_BUCK6_START_SEL 0x28
+#define S2MPU02_BUCK7_START_SEL 0x30
+
+#define S2MPU02_BUCK_RAMP_DELAY 12500
+
+/* Regulator constraints for different types of LDOx */
+#define S2MPU02_LDO_MIN_900MV 900000
+#define S2MPU02_LDO_MIN_1050MV 1050000
+#define S2MPU02_LDO_MIN_1600MV 1600000
+#define S2MPU02_LDO_STEP_12_5MV 12500
+#define S2MPU02_LDO_STEP_25MV 25000
+#define S2MPU02_LDO_STEP_50MV 50000
+
+#define S2MPU02_LDO_GROUP1_START_SEL 0x8
+#define S2MPU02_LDO_GROUP2_START_SEL 0xA
+#define S2MPU02_LDO_GROUP3_START_SEL 0x10
+
+#define S2MPU02_LDO_VSEL_MASK 0x3F
+#define S2MPU02_BUCK_VSEL_MASK 0xFF
+#define S2MPU02_ENABLE_MASK (0x03 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_ENABLE_SHIFT 6
+
+/* On/Off controlled by PWREN */
+#define S2MPU02_ENABLE_SUSPEND (0x01 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_DISABLE_SUSPEND (0x11 << S2MPU02_ENABLE_SHIFT)
+#define S2MPU02_LDO_N_VOLTAGES (S2MPU02_LDO_VSEL_MASK + 1)
+#define S2MPU02_BUCK_N_VOLTAGES (S2MPU02_BUCK_VSEL_MASK + 1)
+
+/* RAMP delay for BUCK1234*/
+#define S2MPU02_BUCK1_RAMP_SHIFT 6
+#define S2MPU02_BUCK2_RAMP_SHIFT 4
+#define S2MPU02_BUCK3_RAMP_SHIFT 2
+#define S2MPU02_BUCK4_RAMP_SHIFT 0
+#define S2MPU02_BUCK1234_RAMP_MASK 0x3
+
+#endif /* __LINUX_MFD_S2MPU02_H */
--
1.8.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device
2014-06-25 7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
@ 2014-06-25 7:14 ` Chanwoo Choi
2014-07-01 14:02 ` Lee Jones
2014-06-25 7:14 ` [PATCHv8 3/4] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption Chanwoo Choi
3 siblings, 1 reply; 8+ messages in thread
From: Chanwoo Choi @ 2014-06-25 7:14 UTC (permalink / raw)
To: lee.jones, sbkim73, sameo, broonie
Cc: myungjoo.ham, kyungmin.park, linux-kernel, Chanwoo Choi, Jonghwa Lee
This patch add S2MPU02 regulator device to existing S2MPS11 device driver
because of little difference between S2MPS1x and S2MPU02. The S2MPU02
regulator device includes LDO[1-28] and BUCK[1-7].
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee]
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/sec-core.c | 25 ++++
drivers/regulator/s2mps11.c | 321 +++++++++++++++++++++++++++++++++++++++++---
2 files changed, 325 insertions(+), 21 deletions(-)
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 15ba847..2621328 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -28,6 +28,7 @@
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regmap.h>
@@ -144,6 +145,18 @@ static bool s2mps11_volatile(struct device *dev, unsigned int reg)
}
}
+static bool s2mpu02_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case S2MPU02_REG_INT1M:
+ case S2MPU02_REG_INT2M:
+ case S2MPU02_REG_INT3M:
+ return false;
+ default:
+ return true;
+ }
+}
+
static bool s5m8763_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -189,6 +202,15 @@ static const struct regmap_config s2mps14_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mpu02_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPU02_REG_DVSDATA,
+ .volatile_reg = s2mpu02_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s5m8763_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -310,6 +332,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
case S5M8767X:
regmap = &s5m8767_regmap_config;
break;
+ case S2MPU02:
+ regmap = &s2mpu02_regmap_config;
+ break;
default:
regmap = &sec_regmap_config;
break;
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 02e2fb2..2daacc6 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -31,6 +31,7 @@
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mpu02.h>
struct s2mps11_info {
unsigned int rdev_num;
@@ -40,11 +41,15 @@ struct s2mps11_info {
int ramp_delay16;
int ramp_delay7810;
int ramp_delay9;
+
+ enum sec_device_type dev_type;
+
/*
- * One bit for each S2MPS14 regulator whether the suspend mode
+ * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
* was enabled.
*/
- unsigned int s2mps14_suspend_state:30;
+ unsigned long long s2mps14_suspend_state:35;
+
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
};
@@ -415,12 +420,24 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
- if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
- val = S2MPS14_ENABLE_SUSPEND;
- else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
- val = S2MPS14_ENABLE_EXT_CONTROL;
- else
- val = rdev->desc->enable_mask;
+ switch (s2mps11->dev_type) {
+ case S2MPS14X:
+ if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+ val = S2MPS14_ENABLE_SUSPEND;
+ else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
+ val = S2MPS14_ENABLE_EXT_CONTROL;
+ else
+ val = rdev->desc->enable_mask;
+ break;
+ case S2MPU02:
+ if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
+ val = S2MPU02_ENABLE_SUSPEND;
+ else
+ val = rdev->desc->enable_mask;
+ break;
+ default:
+ return -EINVAL;
+ };
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val);
@@ -429,12 +446,38 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
{
int ret;
- unsigned int val;
+ unsigned int val, state;
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
+ int rdev_id = rdev_get_id(rdev);
- /* LDO3 should be always on and does not support suspend mode */
- if (rdev_get_id(rdev) == S2MPS14_LDO3)
- return 0;
+ /* Below LDO should be always on or does not support suspend mode. */
+ switch (s2mps11->dev_type) {
+ case S2MPS14X:
+ switch (rdev_id) {
+ case S2MPS14_LDO3:
+ return 0;
+ default:
+ state = S2MPS14_ENABLE_SUSPEND;
+ break;
+ };
+ break;
+ case S2MPU02:
+ switch (rdev_id) {
+ case S2MPU02_LDO13:
+ case S2MPU02_LDO14:
+ case S2MPU02_LDO15:
+ case S2MPU02_LDO17:
+ case S2MPU02_BUCK7:
+ state = S2MPU02_DISABLE_SUSPEND;
+ break;
+ default:
+ state = S2MPU02_ENABLE_SUSPEND;
+ break;
+ };
+ break;
+ default:
+ return -EINVAL;
+ };
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret < 0)
@@ -452,7 +495,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
return 0;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND);
+ rdev->desc->enable_mask, state);
}
static struct regulator_ops s2mps14_reg_ops = {
@@ -605,8 +648,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
}
static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
- struct of_regulator_match *rdata, struct s2mps11_info *s2mps11,
- enum sec_device_type dev_type)
+ struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
{
struct device_node *reg_np;
@@ -617,7 +659,7 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
}
of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
- if (dev_type == S2MPS14X)
+ if (s2mps11->dev_type == S2MPS14X)
s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
of_node_put(reg_np);
@@ -625,6 +667,238 @@ static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
return 0;
}
+static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ unsigned int ramp_val, ramp_shift, ramp_reg;
+
+ switch (rdev_get_id(rdev)) {
+ case S2MPU02_BUCK1:
+ ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
+ break;
+ case S2MPU02_BUCK2:
+ ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
+ break;
+ case S2MPU02_BUCK3:
+ ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
+ break;
+ case S2MPU02_BUCK4:
+ ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
+ break;
+ default:
+ return 0;
+ }
+ ramp_reg = S2MPU02_REG_RAMP1;
+ ramp_val = get_ramp_delay(ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, ramp_reg,
+ S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
+ ramp_val << ramp_shift);
+}
+
+static struct regulator_ops s2mpu02_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = s2mps14_regulator_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_disable = s2mps14_regulator_set_suspend_disable,
+};
+
+static struct regulator_ops s2mpu02_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = s2mps14_regulator_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_disable = s2mps14_regulator_set_suspend_disable,
+ .set_ramp_delay = s2mpu02_set_ramp_delay,
+};
+
+#define regulator_desc_s2mpu02_ldo1(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPU02_LDO##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_LDO_MIN_900MV, \
+ .uV_step = S2MPU02_LDO_STEP_12_5MV, \
+ .linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
+ .n_voltages = S2MPU02_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPU02_REG_L1CTRL, \
+ .vsel_mask = S2MPU02_LDO_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_L1CTRL, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_ldo2(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPU02_LDO##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_LDO_MIN_1050MV, \
+ .uV_step = S2MPU02_LDO_STEP_25MV, \
+ .linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
+ .n_voltages = S2MPU02_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPU02_REG_L2CTRL1, \
+ .vsel_mask = S2MPU02_LDO_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_L2CTRL1, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_ldo3(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPU02_LDO##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_LDO_MIN_900MV, \
+ .uV_step = S2MPU02_LDO_STEP_12_5MV, \
+ .linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
+ .n_voltages = S2MPU02_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .vsel_mask = S2MPU02_LDO_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_ldo4(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPU02_LDO##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_LDO_MIN_1050MV, \
+ .uV_step = S2MPU02_LDO_STEP_25MV, \
+ .linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
+ .n_voltages = S2MPU02_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .vsel_mask = S2MPU02_LDO_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_ldo5(num) { \
+ .name = "LDO"#num, \
+ .id = S2MPU02_LDO##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_LDO_MIN_1600MV, \
+ .uV_step = S2MPU02_LDO_STEP_50MV, \
+ .linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
+ .n_voltages = S2MPU02_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .vsel_mask = S2MPU02_LDO_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mpu02_buck1234(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPU02_BUCK##num, \
+ .ops = &s2mpu02_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_BUCK1234_MIN_600MV, \
+ .uV_step = S2MPU02_BUCK1234_STEP_6_25MV, \
+ .n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
+ .linear_min_sel = S2MPU02_BUCK1234_START_SEL, \
+ .ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPU02_REG_B1CTRL2 + (num - 1) * 2, \
+ .vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_B1CTRL1 + (num - 1) * 2, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_buck5(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPU02_BUCK##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_BUCK5_MIN_1081_25MV, \
+ .uV_step = S2MPU02_BUCK5_STEP_6_25MV, \
+ .n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
+ .linear_min_sel = S2MPU02_BUCK5_START_SEL, \
+ .ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPU02_REG_B5CTRL2, \
+ .vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_B5CTRL1, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_buck6(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPU02_BUCK##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_BUCK6_MIN_1700MV, \
+ .uV_step = S2MPU02_BUCK6_STEP_2_50MV, \
+ .n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
+ .linear_min_sel = S2MPU02_BUCK6_START_SEL, \
+ .ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPU02_REG_B6CTRL2, \
+ .vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_B6CTRL1, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+#define regulator_desc_s2mpu02_buck7(num) { \
+ .name = "BUCK"#num, \
+ .id = S2MPU02_BUCK##num, \
+ .ops = &s2mpu02_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = S2MPU02_BUCK7_MIN_900MV, \
+ .uV_step = S2MPU02_BUCK7_STEP_6_25MV, \
+ .n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
+ .linear_min_sel = S2MPU02_BUCK7_START_SEL, \
+ .ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPU02_REG_B7CTRL2, \
+ .vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPU02_REG_B7CTRL1, \
+ .enable_mask = S2MPU02_ENABLE_MASK \
+}
+
+static const struct regulator_desc s2mpu02_regulators[] = {
+ regulator_desc_s2mpu02_ldo1(1),
+ regulator_desc_s2mpu02_ldo2(2),
+ regulator_desc_s2mpu02_ldo4(3),
+ regulator_desc_s2mpu02_ldo5(4),
+ regulator_desc_s2mpu02_ldo4(5),
+ regulator_desc_s2mpu02_ldo3(6),
+ regulator_desc_s2mpu02_ldo3(7),
+ regulator_desc_s2mpu02_ldo4(8),
+ regulator_desc_s2mpu02_ldo5(9),
+ regulator_desc_s2mpu02_ldo3(10),
+ regulator_desc_s2mpu02_ldo4(11),
+ regulator_desc_s2mpu02_ldo5(12),
+ regulator_desc_s2mpu02_ldo5(13),
+ regulator_desc_s2mpu02_ldo5(14),
+ regulator_desc_s2mpu02_ldo5(15),
+ regulator_desc_s2mpu02_ldo5(16),
+ regulator_desc_s2mpu02_ldo4(17),
+ regulator_desc_s2mpu02_ldo5(18),
+ regulator_desc_s2mpu02_ldo3(19),
+ regulator_desc_s2mpu02_ldo4(20),
+ regulator_desc_s2mpu02_ldo5(21),
+ regulator_desc_s2mpu02_ldo5(22),
+ regulator_desc_s2mpu02_ldo5(23),
+ regulator_desc_s2mpu02_ldo4(24),
+ regulator_desc_s2mpu02_ldo5(25),
+ regulator_desc_s2mpu02_ldo4(26),
+ regulator_desc_s2mpu02_ldo5(27),
+ regulator_desc_s2mpu02_ldo5(28),
+ regulator_desc_s2mpu02_buck1234(1),
+ regulator_desc_s2mpu02_buck1234(2),
+ regulator_desc_s2mpu02_buck1234(3),
+ regulator_desc_s2mpu02_buck1234(4),
+ regulator_desc_s2mpu02_buck5(5),
+ regulator_desc_s2mpu02_buck6(6),
+ regulator_desc_s2mpu02_buck7(7),
+};
+
static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +908,14 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
struct s2mps11_info *s2mps11;
int i, ret = 0;
const struct regulator_desc *regulators;
- enum sec_device_type dev_type;
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
GFP_KERNEL);
if (!s2mps11)
return -ENOMEM;
- dev_type = platform_get_device_id(pdev)->driver_data;
- switch (dev_type) {
+ s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
+ switch (s2mps11->dev_type) {
case S2MPS11X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
@@ -651,8 +924,13 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
break;
+ case S2MPU02:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
+ regulators = s2mpu02_regulators;
+ break;
default:
- dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type);
+ dev_err(&pdev->dev, "Invalid device type: %u\n",
+ s2mps11->dev_type);
return -EINVAL;
};
@@ -686,7 +964,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
for (i = 0; i < s2mps11->rdev_num; i++)
rdata[i].name = regulators[i].name;
- ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, dev_type);
+ ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
if (ret)
goto out;
@@ -739,6 +1017,7 @@ out:
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps14-pmic", S2MPS14X},
+ { "s2mpu02-pmic", S2MPU02},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
--
1.8.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCHv8 3/4] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC
2014-06-25 7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device Chanwoo Choi
@ 2014-06-25 7:14 ` Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption Chanwoo Choi
3 siblings, 0 replies; 8+ messages in thread
From: Chanwoo Choi @ 2014-06-25 7:14 UTC (permalink / raw)
To: lee.jones, sbkim73, sameo, broonie
Cc: myungjoo.ham, kyungmin.park, linux-kernel, Chanwoo Choi
This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index d81ba30..f7c9180 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+ or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS14: 1 to 25
+ - S2MPU02: 1 to 28
- Example: LDO1, LD02, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
Example:
--
1.8.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption
2014-06-25 7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
` (2 preceding siblings ...)
2014-06-25 7:14 ` [PATCHv8 3/4] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC Chanwoo Choi
@ 2014-06-25 7:14 ` Chanwoo Choi
2014-07-01 14:04 ` Lee Jones
3 siblings, 1 reply; 8+ messages in thread
From: Chanwoo Choi @ 2014-06-25 7:14 UTC (permalink / raw)
To: lee.jones, sbkim73, sameo, broonie
Cc: myungjoo.ham, kyungmin.park, linux-kernel, Chanwoo Choi
This patch use regulator_suspend_prepare() function to prepare the proper state
of regulators for suspend state to remove un-necessary leakage power-consumption.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/mfd/Kconfig | 1 +
drivers/mfd/sec-core.c | 10 ++++++++++
2 files changed, 11 insertions(+)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index af0e83f..b5898dc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -586,6 +586,7 @@ config MFD_SEC_CORE
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
+ select REGULATOR
help
Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 2621328..fb8ba64 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -31,6 +31,7 @@
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/regulator/machine.h>
#include <linux/regmap.h>
static const struct mfd_cell s5m8751_devs[] = {
@@ -430,6 +431,15 @@ static int sec_pmic_suspend(struct device *dev)
*/
disable_irq(sec_pmic->irq);
+ switch (sec_pmic->device_type) {
+ case S2MPS14X:
+ case S2MPU02:
+ regulator_suspend_prepare(PM_SUSPEND_MEM);
+ break;
+ default:
+ break;
+ }
+
return 0;
}
--
1.8.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device
2014-06-25 7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
@ 2014-07-01 14:00 ` Lee Jones
0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2014-07-01 14:00 UTC (permalink / raw)
To: Chanwoo Choi
Cc: sbkim73, sameo, broonie, myungjoo.ham, kyungmin.park, linux-kernel
On Wed, 25 Jun 2014, Chanwoo Choi wrote:
> Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver.
> The S2MPU02 device includes PMIC/RTC/Clock devices.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/mfd/sec-core.c | 46 ++++++---
> drivers/mfd/sec-irq.c | 110 +++++++++++++++++---
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/irq.h | 24 +++++
> include/linux/mfd/samsung/s2mpu02.h | 201 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 352 insertions(+), 30 deletions(-)
> create mode 100644 include/linux/mfd/samsung/s2mpu02.h
I like what you've done, but really this patch should be split into 3
separate patches. One to consolidate the mfd_add_devices() calls, one
to consolidate the regmap_add_irq_chip() calls and the final one to
add support for the S2MPU02.
When you submit them, you can apply my:
Acked-by: Lee Jones <lee.jones@linaro.org>
... to each of them.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device
2014-06-25 7:14 ` [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device Chanwoo Choi
@ 2014-07-01 14:02 ` Lee Jones
0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2014-07-01 14:02 UTC (permalink / raw)
To: Chanwoo Choi
Cc: sbkim73, sameo, broonie, myungjoo.ham, kyungmin.park,
linux-kernel, Jonghwa Lee
On Wed, 25 Jun 2014, Chanwoo Choi wrote:
> This patch add S2MPU02 regulator device to existing S2MPS11 device driver
> because of little difference between S2MPS1x and S2MPU02. The S2MPU02
> regulator device includes LDO[1-28] and BUCK[1-7].
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> [Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee]
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Acked-by: Mark Brown <broonie@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/mfd/sec-core.c | 25 ++++
> drivers/regulator/s2mps11.c | 321 +++++++++++++++++++++++++++++++++++++++++--
Why are these change munged into one patch? Shouldn't the MFD changes
really be in patch 1?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption
2014-06-25 7:14 ` [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption Chanwoo Choi
@ 2014-07-01 14:04 ` Lee Jones
0 siblings, 0 replies; 8+ messages in thread
From: Lee Jones @ 2014-07-01 14:04 UTC (permalink / raw)
To: Chanwoo Choi
Cc: sbkim73, sameo, broonie, myungjoo.ham, kyungmin.park, linux-kernel
On Wed, 25 Jun 2014, Chanwoo Choi wrote:
> This patch use regulator_suspend_prepare() function to prepare the proper state
> of regulators for suspend state to remove un-necessary leakage power-consumption.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/sec-core.c | 10 ++++++++++
> 2 files changed, 11 insertions(+)
Looks reasonable to me:
Acked-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-07-01 14:04 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-25 7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
2014-07-01 14:00 ` Lee Jones
2014-06-25 7:14 ` [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device Chanwoo Choi
2014-07-01 14:02 ` Lee Jones
2014-06-25 7:14 ` [PATCHv8 3/4] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC Chanwoo Choi
2014-06-25 7:14 ` [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption Chanwoo Choi
2014-07-01 14:04 ` Lee Jones
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.