All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mario Smarduch <m.smarduch@samsung.com>
To: kvmarm@lists.cs.columbia.edu, marc.zyngier@arm.com,
	christoffer.dall@linaro.org, pbonzini@redhat.com,
	gleb@kernel.org, agraf@suse.de, xiantao.zhang@intel.com,
	borntraeger@de.ibm.com, cornelia.huck@de.ibm.com
Cc: xiaoguangrong@linux.vnet.ibm.com, steve.capper@arm.com,
	kvm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	jays.lee@samsung.com, sungjinn.chung@samsung.com,
	Mario Smarduch <m.smarduch@samsung.com>
Subject: [PATCH v9 4/4] arm: ARMv7 dirty page logging 2nd stage page fault handling support
Date: Thu, 24 Jul 2014 17:56:08 -0700	[thread overview]
Message-ID: <1406249768-25315-5-git-send-email-m.smarduch@samsung.com> (raw)
In-Reply-To: <1406249768-25315-1-git-send-email-m.smarduch@samsung.com>

This patch adds support for handling 2nd stage page faults during migration,
it disables faulting in huge pages, and dissolves huge pages to page tables.
In case migration is canceled huge pages will be used again.

Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
---
 arch/arm/kvm/mmu.c |   31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index ca84331..a17812a 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -642,7 +642,8 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
 }
 
 static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
-			  phys_addr_t addr, const pte_t *new_pte, bool iomap)
+			  phys_addr_t addr, const pte_t *new_pte, bool iomap,
+			  bool logging_active)
 {
 	pmd_t *pmd;
 	pte_t *pte, old_pte;
@@ -657,6 +658,15 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 		return 0;
 	}
 
+	/*
+	 * While dirty memory logging, clear PMD entry for huge page and split
+	 * into smaller pages, to track dirty memory at page granularity.
+	 */
+	if (logging_active && kvm_pmd_huge(*pmd)) {
+		phys_addr_t ipa = pmd_pfn(*pmd) << PAGE_SHIFT;
+		clear_pmd_entry(kvm, pmd, ipa);
+	}
+
 	/* Create stage-2 page mappings - Level 2 */
 	if (pmd_none(*pmd)) {
 		if (!cache)
@@ -709,7 +719,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 		if (ret)
 			goto out;
 		spin_lock(&kvm->mmu_lock);
-		ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
+		ret = stage2_set_pte(kvm, &cache, addr, &pte, true, false);
 		spin_unlock(&kvm->mmu_lock);
 		if (ret)
 			goto out;
@@ -926,6 +936,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
 	struct vm_area_struct *vma;
 	pfn_t pfn;
+	/* Get logging status, if dirty_bitmap is not NULL then logging is on */
+	#ifdef CONFIG_ARM
+		bool logging_active = !!memslot->dirty_bitmap;
+	#else
+		bool logging_active = false;
+	#endif
 
 	write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu));
 	if (fault_status == FSC_PERM && !write_fault) {
@@ -936,7 +952,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	/* Let's check if we will get back a huge page backed by hugetlbfs */
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma_intersection(current->mm, hva, hva + 1);
-	if (is_vm_hugetlb_page(vma)) {
+	if (is_vm_hugetlb_page(vma) && !logging_active) {
 		hugetlb = true;
 		gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT;
 	} else {
@@ -979,7 +995,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	spin_lock(&kvm->mmu_lock);
 	if (mmu_notifier_retry(kvm, mmu_seq))
 		goto out_unlock;
-	if (!hugetlb && !force_pte)
+	if (!hugetlb && !force_pte && !logging_active)
 		hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
 
 	if (hugetlb) {
@@ -998,9 +1014,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_pfn_dirty(pfn);
 		}
 		coherent_cache_guest_page(vcpu, hva, PAGE_SIZE);
-		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false);
+		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false,
+					logging_active);
 	}
 
+	if (write_fault)
+		mark_page_dirty(kvm, gfn);
 
 out_unlock:
 	spin_unlock(&kvm->mmu_lock);
@@ -1151,7 +1170,7 @@ static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
 {
 	pte_t *pte = (pte_t *)data;
 
-	stage2_set_pte(kvm, NULL, gpa, pte, false);
+	stage2_set_pte(kvm, NULL, gpa, pte, false, false);
 }
 
 
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: m.smarduch@samsung.com (Mario Smarduch)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 4/4] arm: ARMv7 dirty page logging 2nd stage page fault handling support
Date: Thu, 24 Jul 2014 17:56:08 -0700	[thread overview]
Message-ID: <1406249768-25315-5-git-send-email-m.smarduch@samsung.com> (raw)
In-Reply-To: <1406249768-25315-1-git-send-email-m.smarduch@samsung.com>

This patch adds support for handling 2nd stage page faults during migration,
it disables faulting in huge pages, and dissolves huge pages to page tables.
In case migration is canceled huge pages will be used again.

Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
---
 arch/arm/kvm/mmu.c |   31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index ca84331..a17812a 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -642,7 +642,8 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
 }
 
 static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
-			  phys_addr_t addr, const pte_t *new_pte, bool iomap)
+			  phys_addr_t addr, const pte_t *new_pte, bool iomap,
+			  bool logging_active)
 {
 	pmd_t *pmd;
 	pte_t *pte, old_pte;
@@ -657,6 +658,15 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 		return 0;
 	}
 
+	/*
+	 * While dirty memory logging, clear PMD entry for huge page and split
+	 * into smaller pages, to track dirty memory at page granularity.
+	 */
+	if (logging_active && kvm_pmd_huge(*pmd)) {
+		phys_addr_t ipa = pmd_pfn(*pmd) << PAGE_SHIFT;
+		clear_pmd_entry(kvm, pmd, ipa);
+	}
+
 	/* Create stage-2 page mappings - Level 2 */
 	if (pmd_none(*pmd)) {
 		if (!cache)
@@ -709,7 +719,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 		if (ret)
 			goto out;
 		spin_lock(&kvm->mmu_lock);
-		ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
+		ret = stage2_set_pte(kvm, &cache, addr, &pte, true, false);
 		spin_unlock(&kvm->mmu_lock);
 		if (ret)
 			goto out;
@@ -926,6 +936,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
 	struct vm_area_struct *vma;
 	pfn_t pfn;
+	/* Get logging status, if dirty_bitmap is not NULL then logging is on */
+	#ifdef CONFIG_ARM
+		bool logging_active = !!memslot->dirty_bitmap;
+	#else
+		bool logging_active = false;
+	#endif
 
 	write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu));
 	if (fault_status == FSC_PERM && !write_fault) {
@@ -936,7 +952,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	/* Let's check if we will get back a huge page backed by hugetlbfs */
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma_intersection(current->mm, hva, hva + 1);
-	if (is_vm_hugetlb_page(vma)) {
+	if (is_vm_hugetlb_page(vma) && !logging_active) {
 		hugetlb = true;
 		gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT;
 	} else {
@@ -979,7 +995,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	spin_lock(&kvm->mmu_lock);
 	if (mmu_notifier_retry(kvm, mmu_seq))
 		goto out_unlock;
-	if (!hugetlb && !force_pte)
+	if (!hugetlb && !force_pte && !logging_active)
 		hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
 
 	if (hugetlb) {
@@ -998,9 +1014,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			kvm_set_pfn_dirty(pfn);
 		}
 		coherent_cache_guest_page(vcpu, hva, PAGE_SIZE);
-		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false);
+		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false,
+					logging_active);
 	}
 
+	if (write_fault)
+		mark_page_dirty(kvm, gfn);
 
 out_unlock:
 	spin_unlock(&kvm->mmu_lock);
@@ -1151,7 +1170,7 @@ static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
 {
 	pte_t *pte = (pte_t *)data;
 
-	stage2_set_pte(kvm, NULL, gpa, pte, false);
+	stage2_set_pte(kvm, NULL, gpa, pte, false, false);
 }
 
 
-- 
1.7.9.5

  parent reply	other threads:[~2014-07-25  0:56 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-25  0:56 [PATCH v9 0/4] arm: dirty page logging support for ARMv7 Mario Smarduch
2014-07-25  0:56 ` Mario Smarduch
2014-07-25  0:56 ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs, change generic TLB flush to support arch flush Mario Smarduch
2014-07-25  0:56   ` Mario Smarduch
2014-07-25  6:12   ` Alexander Graf
2014-07-25  6:12     ` Alexander Graf
2014-07-25 17:37     ` Mario Smarduch
2014-07-25 17:37       ` Mario Smarduch
2014-08-08 17:50       ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs ... - looking for comments Mario Smarduch
2014-08-08 17:50         ` Mario Smarduch
2014-08-11 19:12   ` [PATCH v9 1/4] arm: add ARMv7 HYP API to flush VM TLBs, change generic TLB flush to support arch flush Christoffer Dall
2014-08-11 19:12     ` Christoffer Dall
2014-08-11 23:54     ` Mario Smarduch
2014-08-11 23:54       ` Mario Smarduch
2014-07-25  0:56 ` [PATCH v9 2/4] arm: ARMv7 dirty page logging inital mem region write protect (w/no huge PUD support) Mario Smarduch
2014-07-25  0:56   ` Mario Smarduch
2014-07-25  6:16   ` Alexander Graf
2014-07-25  6:16     ` Alexander Graf
2014-07-25 17:45     ` Mario Smarduch
2014-07-25 17:45       ` Mario Smarduch
2014-08-11 19:12   ` Christoffer Dall
2014-08-11 19:12     ` Christoffer Dall
2014-08-12  0:16     ` Mario Smarduch
2014-08-12  0:16       ` Mario Smarduch
2014-08-12  9:32       ` Christoffer Dall
2014-08-12  9:32         ` Christoffer Dall
2014-08-12 23:17         ` Mario Smarduch
2014-08-12 23:17           ` Mario Smarduch
2014-08-12  1:36     ` Mario Smarduch
2014-08-12  1:36       ` Mario Smarduch
2014-08-12  9:36       ` Christoffer Dall
2014-08-12  9:36         ` Christoffer Dall
2014-08-12 21:08         ` Mario Smarduch
2014-08-12 21:08           ` Mario Smarduch
2014-07-25  0:56 ` [PATCH v9 3/4] arm: dirty log write protect mgmt. Moved x86, armv7 to generic, set armv8 ia64 mips powerpc s390 arch specific Mario Smarduch
2014-07-25  0:56   ` Mario Smarduch
2014-08-11 19:13   ` Christoffer Dall
2014-08-11 19:13     ` Christoffer Dall
2014-08-12  0:24     ` Mario Smarduch
2014-08-12  0:24       ` Mario Smarduch
2014-07-25  0:56 ` Mario Smarduch [this message]
2014-07-25  0:56   ` [PATCH v9 4/4] arm: ARMv7 dirty page logging 2nd stage page fault handling support Mario Smarduch
2014-08-11 19:13   ` Christoffer Dall
2014-08-11 19:13     ` Christoffer Dall
2014-08-12  1:25     ` Mario Smarduch
2014-08-12  1:25       ` Mario Smarduch
2014-08-12  9:50       ` Christoffer Dall
2014-08-12  9:50         ` Christoffer Dall
2014-08-13  1:27         ` Mario Smarduch
2014-08-13  1:27           ` Mario Smarduch
2014-08-13  7:30           ` Christoffer Dall
2014-08-13  7:30             ` Christoffer Dall
2014-08-14  1:20             ` Mario Smarduch
2014-08-14  1:20               ` Mario Smarduch
2014-08-15  0:01               ` Mario Smarduch
2014-08-15  0:01                 ` Mario Smarduch
2014-08-18 12:51               ` Christoffer Dall
2014-08-18 12:51                 ` Christoffer Dall
2014-08-18 17:42                 ` Mario Smarduch
2014-08-18 17:42                   ` Mario Smarduch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406249768-25315-5-git-send-email-m.smarduch@samsung.com \
    --to=m.smarduch@samsung.com \
    --cc=agraf@suse.de \
    --cc=borntraeger@de.ibm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=cornelia.huck@de.ibm.com \
    --cc=gleb@kernel.org \
    --cc=jays.lee@samsung.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=steve.capper@arm.com \
    --cc=sungjinn.chung@samsung.com \
    --cc=xiantao.zhang@intel.com \
    --cc=xiaoguangrong@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.