From: Javier Martinez Canillas <javier.martinez@collabora.co.uk> To: Alessandro Zummo <a.zummo@towertech.it> Cc: Doug Anderson <dianders@chromium.org>, Olof Johansson <olof@lixom.net>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, rtc-linux@googlegroups.com, linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas <javier.martinez@collabora.co.uk> Subject: [PATCH v9 2/5] rtc: max77686: Remove dead code for SMPL and WTSR. Date: Mon, 18 Aug 2014 10:34:34 +0200 [thread overview] Message-ID: <1408350877-15921-3-git-send-email-javier.martinez@collabora.co.uk> (raw) In-Reply-To: <1408350877-15921-1-git-send-email-javier.martinez@collabora.co.uk> The MAX77686 RTC chip has two features called SMPL (Sudden Momentary Power Loss) and WTSR (Watchdog Timeout and Software Resets). Support for these features seems to be implemented in the driver but compilation is disabled using a C pre-processor conditional. This code has been disabled since the driver was original merged in commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver"). So, since this code has never been built, let's just remove it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- drivers/rtc/rtc-max77686.c | 101 --------------------------------------------- 1 file changed, 101 deletions(-) diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c index c1c6055..7bb5433 100644 --- a/drivers/rtc/rtc-max77686.c +++ b/drivers/rtc/rtc-max77686.c @@ -32,15 +32,6 @@ #define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) #define RTC_RBUDR_SHIFT 4 #define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT) -/* WTSR and SMPL Register */ -#define WTSRT_SHIFT 0 -#define SMPLT_SHIFT 2 -#define WTSR_EN_SHIFT 6 -#define SMPL_EN_SHIFT 7 -#define WTSRT_MASK (3 << WTSRT_SHIFT) -#define SMPLT_MASK (3 << SMPLT_SHIFT) -#define WTSR_EN_MASK (1 << WTSR_EN_SHIFT) -#define SMPL_EN_MASK (1 << SMPL_EN_SHIFT) /* RTC Hour register */ #define HOUR_PM_SHIFT 6 #define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) @@ -49,7 +40,6 @@ #define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) #define MAX77686_RTC_UPDATE_DELAY 16 -#undef MAX77686_RTC_WTSR_SMPL enum { RTC_SEC = 0, @@ -412,64 +402,6 @@ static const struct rtc_class_ops max77686_rtc_ops = { .alarm_irq_enable = max77686_rtc_alarm_irq_enable, }; -#ifdef MAX77686_RTC_WTSR_SMPL -static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable) -{ - int ret; - unsigned int val, mask; - - if (enable) - val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT); - else - val = 0; - - mask = WTSR_EN_MASK | WTSRT_MASK; - - dev_info(info->dev, "%s: %s WTSR\n", __func__, - enable ? "enable" : "disable"); - - ret = regmap_update_bits(info->max77686->rtc_regmap, - MAX77686_WTSR_SMPL_CNTL, mask, val); - if (ret < 0) { - dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n", - __func__, ret); - return; - } - - max77686_rtc_update(info, MAX77686_RTC_WRITE); -} - -static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable) -{ - int ret; - unsigned int val, mask; - - if (enable) - val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT); - else - val = 0; - - mask = SMPL_EN_MASK | SMPLT_MASK; - - dev_info(info->dev, "%s: %s SMPL\n", __func__, - enable ? "enable" : "disable"); - - ret = regmap_update_bits(info->max77686->rtc_regmap, - MAX77686_WTSR_SMPL_CNTL, mask, val); - if (ret < 0) { - dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n", - __func__, ret); - return; - } - - max77686_rtc_update(info, MAX77686_RTC_WRITE); - - val = 0; - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val); - dev_info(info->dev, "%s: WTSR_SMPL(0x%02x)\n", __func__, val); -} -#endif /* MAX77686_RTC_WTSR_SMPL */ - static int max77686_rtc_init_reg(struct max77686_rtc_info *info) { u8 data[2]; @@ -519,11 +451,6 @@ static int max77686_rtc_probe(struct platform_device *pdev) goto err_rtc; } -#ifdef MAX77686_RTC_WTSR_SMPL - max77686_rtc_enable_wtsr(info, true); - max77686_rtc_enable_smpl(info, true); -#endif - device_init_wakeup(&pdev->dev, 1); info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc", @@ -556,33 +483,6 @@ err_rtc: return ret; } -static void max77686_rtc_shutdown(struct platform_device *pdev) -{ -#ifdef MAX77686_RTC_WTSR_SMPL - struct max77686_rtc_info *info = platform_get_drvdata(pdev); - int i; - u8 val = 0; - - for (i = 0; i < 3; i++) { - max77686_rtc_enable_wtsr(info, false); - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val); - dev_info(info->dev, "%s: WTSR_SMPL reg(0x%02x)\n", __func__, - val); - if (val & WTSR_EN_MASK) { - dev_emerg(info->dev, "%s: fail to disable WTSR\n", - __func__); - } else { - dev_info(info->dev, "%s: success to disable WTSR\n", - __func__); - break; - } - } - - /* Disable SMPL when power off */ - max77686_rtc_enable_smpl(info, false); -#endif /* MAX77686_RTC_WTSR_SMPL */ -} - #ifdef CONFIG_PM_SLEEP static int max77686_rtc_suspend(struct device *dev) { @@ -622,7 +522,6 @@ static struct platform_driver max77686_rtc_driver = { .pm = &max77686_rtc_pm_ops, }, .probe = max77686_rtc_probe, - .shutdown = max77686_rtc_shutdown, .id_table = rtc_id, }; -- 2.0.0.rc2
WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v9 2/5] rtc: max77686: Remove dead code for SMPL and WTSR. Date: Mon, 18 Aug 2014 10:34:34 +0200 [thread overview] Message-ID: <1408350877-15921-3-git-send-email-javier.martinez@collabora.co.uk> (raw) In-Reply-To: <1408350877-15921-1-git-send-email-javier.martinez@collabora.co.uk> The MAX77686 RTC chip has two features called SMPL (Sudden Momentary Power Loss) and WTSR (Watchdog Timeout and Software Resets). Support for these features seems to be implemented in the driver but compilation is disabled using a C pre-processor conditional. This code has been disabled since the driver was original merged in commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver"). So, since this code has never been built, let's just remove it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- drivers/rtc/rtc-max77686.c | 101 --------------------------------------------- 1 file changed, 101 deletions(-) diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c index c1c6055..7bb5433 100644 --- a/drivers/rtc/rtc-max77686.c +++ b/drivers/rtc/rtc-max77686.c @@ -32,15 +32,6 @@ #define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) #define RTC_RBUDR_SHIFT 4 #define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT) -/* WTSR and SMPL Register */ -#define WTSRT_SHIFT 0 -#define SMPLT_SHIFT 2 -#define WTSR_EN_SHIFT 6 -#define SMPL_EN_SHIFT 7 -#define WTSRT_MASK (3 << WTSRT_SHIFT) -#define SMPLT_MASK (3 << SMPLT_SHIFT) -#define WTSR_EN_MASK (1 << WTSR_EN_SHIFT) -#define SMPL_EN_MASK (1 << SMPL_EN_SHIFT) /* RTC Hour register */ #define HOUR_PM_SHIFT 6 #define HOUR_PM_MASK (1 << HOUR_PM_SHIFT) @@ -49,7 +40,6 @@ #define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT) #define MAX77686_RTC_UPDATE_DELAY 16 -#undef MAX77686_RTC_WTSR_SMPL enum { RTC_SEC = 0, @@ -412,64 +402,6 @@ static const struct rtc_class_ops max77686_rtc_ops = { .alarm_irq_enable = max77686_rtc_alarm_irq_enable, }; -#ifdef MAX77686_RTC_WTSR_SMPL -static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable) -{ - int ret; - unsigned int val, mask; - - if (enable) - val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT); - else - val = 0; - - mask = WTSR_EN_MASK | WTSRT_MASK; - - dev_info(info->dev, "%s: %s WTSR\n", __func__, - enable ? "enable" : "disable"); - - ret = regmap_update_bits(info->max77686->rtc_regmap, - MAX77686_WTSR_SMPL_CNTL, mask, val); - if (ret < 0) { - dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n", - __func__, ret); - return; - } - - max77686_rtc_update(info, MAX77686_RTC_WRITE); -} - -static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable) -{ - int ret; - unsigned int val, mask; - - if (enable) - val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT); - else - val = 0; - - mask = SMPL_EN_MASK | SMPLT_MASK; - - dev_info(info->dev, "%s: %s SMPL\n", __func__, - enable ? "enable" : "disable"); - - ret = regmap_update_bits(info->max77686->rtc_regmap, - MAX77686_WTSR_SMPL_CNTL, mask, val); - if (ret < 0) { - dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n", - __func__, ret); - return; - } - - max77686_rtc_update(info, MAX77686_RTC_WRITE); - - val = 0; - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val); - dev_info(info->dev, "%s: WTSR_SMPL(0x%02x)\n", __func__, val); -} -#endif /* MAX77686_RTC_WTSR_SMPL */ - static int max77686_rtc_init_reg(struct max77686_rtc_info *info) { u8 data[2]; @@ -519,11 +451,6 @@ static int max77686_rtc_probe(struct platform_device *pdev) goto err_rtc; } -#ifdef MAX77686_RTC_WTSR_SMPL - max77686_rtc_enable_wtsr(info, true); - max77686_rtc_enable_smpl(info, true); -#endif - device_init_wakeup(&pdev->dev, 1); info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc", @@ -556,33 +483,6 @@ err_rtc: return ret; } -static void max77686_rtc_shutdown(struct platform_device *pdev) -{ -#ifdef MAX77686_RTC_WTSR_SMPL - struct max77686_rtc_info *info = platform_get_drvdata(pdev); - int i; - u8 val = 0; - - for (i = 0; i < 3; i++) { - max77686_rtc_enable_wtsr(info, false); - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val); - dev_info(info->dev, "%s: WTSR_SMPL reg(0x%02x)\n", __func__, - val); - if (val & WTSR_EN_MASK) { - dev_emerg(info->dev, "%s: fail to disable WTSR\n", - __func__); - } else { - dev_info(info->dev, "%s: success to disable WTSR\n", - __func__); - break; - } - } - - /* Disable SMPL when power off */ - max77686_rtc_enable_smpl(info, false); -#endif /* MAX77686_RTC_WTSR_SMPL */ -} - #ifdef CONFIG_PM_SLEEP static int max77686_rtc_suspend(struct device *dev) { @@ -622,7 +522,6 @@ static struct platform_driver max77686_rtc_driver = { .pm = &max77686_rtc_pm_ops, }, .probe = max77686_rtc_probe, - .shutdown = max77686_rtc_shutdown, .id_table = rtc_id, }; -- 2.0.0.rc2
next prev parent reply other threads:[~2014-08-18 8:35 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-08-18 8:34 [PATCH v9 0/5] Add Maxim 77802 RTC support Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-08-18 8:34 ` [PATCH v9 1/5] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas [this message] 2014-08-18 8:34 ` [PATCH v9 2/5] rtc: max77686: Remove dead code for SMPL and WTSR Javier Martinez Canillas 2014-08-18 8:34 ` [PATCH v9 3/5] rtc: max77686: Fail to probe if no RTC regmap irqchip is set Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-08-28 9:21 ` Krzysztof Kozlowski 2014-08-28 9:21 ` Krzysztof Kozlowski 2014-09-08 6:50 ` Javier Martinez Canillas 2014-09-08 6:50 ` Javier Martinez Canillas 2014-08-18 8:34 ` [PATCH v9 4/5] rtc: max77686: Remove unneded info log Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-08-28 8:36 ` Krzysztof Kozlowski 2014-08-28 8:36 ` Krzysztof Kozlowski 2014-08-18 8:34 ` [PATCH v9 5/5] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas 2014-08-18 8:34 ` Javier Martinez Canillas 2014-09-08 6:48 ` [PATCH v9 0/5] Add Maxim 77802 RTC support Javier Martinez Canillas 2014-09-08 6:48 ` Javier Martinez Canillas 2014-09-08 6:48 ` Javier Martinez Canillas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1408350877-15921-3-git-send-email-javier.martinez@collabora.co.uk \ --to=javier.martinez@collabora.co.uk \ --cc=a.zummo@towertech.it \ --cc=dianders@chromium.org \ --cc=k.kozlowski@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=olof@lixom.net \ --cc=rtc-linux@googlegroups.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.