From: Antoine Tenart <antoine.tenart@free-electrons.com>
To: sebastian.hesselbarth@gmail.com, Peter.Chen@freescale.com,
balbi@ti.com, p.zabel@pengutronix.de
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>,
alexandre.belloni@free-electrons.com,
thomas.petazzoni@free-electrons.com, zmxu@marvell.com,
jszhang@marvell.com, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 00/12] ARM: berlin: USB support
Date: Wed, 3 Sep 2014 09:48:19 +0200 [thread overview]
Message-ID: <1409730511-16101-1-git-send-email-antoine.tenart@free-electrons.com> (raw)
This series adds the support for ChipIdea USB2 (ci13xxx) controllers,
the USB PHYs of the Marvell Berlin SoCs and also adds a reset
controller for these SoCs.
The reset controller is used by the PHY driver and shares the
existing chip controller node with the clocks and one pin controller.
The Marvell Berlin USB controllers are host only on the BG2Q and are
compatible with USB ChipIdea. We here add a glue to use the available
common functions for this kind of controllers, and add a generic USB2
ChipIdea driver. A PHY driver is also added to control the USB PHY.
This series applies on top of the generic PHY support in the USB
framework[1].
Changes since v3:
- removed the DMA mask property
- moved the clock handling in the common probe function
- fixed the documentation for the USB2 ChipIdea USB PHY binding
- made sure the reset bit is 0-31 in the reset driver
Changes since v2:
- moved the PHY driver to the generic PHY framework
- changed the compatible to 'chipidea,usb2'
- added a property to set the DMA mask in the USB2 CI driver
- separated dt specific calls in the CI probing function
- rebased on top of the generic PHY support for CI[1]
Changes since v1:
- made the Berlin CI USB driver a generic one
- added support to custom offset for the reset register
- added fixed regulators to support supply the VBUS
- modified the PHY driver to support the one one the BG2CD as
well
- documented the reset properties
- added bindings for the BG2CD
- cosmetic fixes
[1] git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy
https://lkml.org/lkml/2014/9/3/78
Antoine Tenart (10):
reset: add the Berlin reset controller driver
Documentation: bindings: add reset bindings docs for Marvell Berlin
SoCs
ARM: Berlin: select the reset controller
ARM: dts: berlin: add a required reset property in the chip controller
node
phy: add the Berlin USB PHY driver
Documentation: bindings: add doc for the Berlin USB PHY
usb: chipidea: add a usb2 driver for ci13xxx
Documentation: bindings: add doc for the USB2 ChipIdea USB driver
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP
Sebastian Hesselbarth (2):
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: berlin: enable USB on the Google Chromecast
.../devicetree/bindings/arm/marvell,berlin.txt | 10 +
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 ++
arch/arm/boot/dts/berlin2.dtsi | 1 +
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 +
arch/arm/boot/dts/berlin2cd.dtsi | 35 ++++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 +++++
arch/arm/boot/dts/berlin2q.dtsi | 53 +++++
arch/arm/mach-berlin/Kconfig | 2 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-usb.c | 224 +++++++++++++++++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-berlin.c | 131 ++++++++++++
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci_hdrc_usb2.c | 137 +++++++++++++
16 files changed, 698 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
create mode 100644 drivers/phy/phy-berlin-usb.c
create mode 100644 drivers/reset/reset-berlin.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Antoine Tenart <antoine.tenart@free-electrons.com>
To: sebastian.hesselbarth@gmail.com, Peter.Chen@freescale.com,
balbi@ti.com, p.zabel@pengutronix.de
Cc: thomas.petazzoni@free-electrons.com, zmxu@marvell.com,
devicetree@vger.kernel.org,
Antoine Tenart <antoine.tenart@free-electrons.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
alexandre.belloni@free-electrons.com, jszhang@marvell.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/12] ARM: berlin: USB support
Date: Wed, 3 Sep 2014 09:48:19 +0200 [thread overview]
Message-ID: <1409730511-16101-1-git-send-email-antoine.tenart@free-electrons.com> (raw)
This series adds the support for ChipIdea USB2 (ci13xxx) controllers,
the USB PHYs of the Marvell Berlin SoCs and also adds a reset
controller for these SoCs.
The reset controller is used by the PHY driver and shares the
existing chip controller node with the clocks and one pin controller.
The Marvell Berlin USB controllers are host only on the BG2Q and are
compatible with USB ChipIdea. We here add a glue to use the available
common functions for this kind of controllers, and add a generic USB2
ChipIdea driver. A PHY driver is also added to control the USB PHY.
This series applies on top of the generic PHY support in the USB
framework[1].
Changes since v3:
- removed the DMA mask property
- moved the clock handling in the common probe function
- fixed the documentation for the USB2 ChipIdea USB PHY binding
- made sure the reset bit is 0-31 in the reset driver
Changes since v2:
- moved the PHY driver to the generic PHY framework
- changed the compatible to 'chipidea,usb2'
- added a property to set the DMA mask in the USB2 CI driver
- separated dt specific calls in the CI probing function
- rebased on top of the generic PHY support for CI[1]
Changes since v1:
- made the Berlin CI USB driver a generic one
- added support to custom offset for the reset register
- added fixed regulators to support supply the VBUS
- modified the PHY driver to support the one one the BG2CD as
well
- documented the reset properties
- added bindings for the BG2CD
- cosmetic fixes
[1] git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy
https://lkml.org/lkml/2014/9/3/78
Antoine Tenart (10):
reset: add the Berlin reset controller driver
Documentation: bindings: add reset bindings docs for Marvell Berlin
SoCs
ARM: Berlin: select the reset controller
ARM: dts: berlin: add a required reset property in the chip controller
node
phy: add the Berlin USB PHY driver
Documentation: bindings: add doc for the Berlin USB PHY
usb: chipidea: add a usb2 driver for ci13xxx
Documentation: bindings: add doc for the USB2 ChipIdea USB driver
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP
Sebastian Hesselbarth (2):
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: berlin: enable USB on the Google Chromecast
.../devicetree/bindings/arm/marvell,berlin.txt | 10 +
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 ++
arch/arm/boot/dts/berlin2.dtsi | 1 +
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 +
arch/arm/boot/dts/berlin2cd.dtsi | 35 ++++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 +++++
arch/arm/boot/dts/berlin2q.dtsi | 53 +++++
arch/arm/mach-berlin/Kconfig | 2 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-usb.c | 224 +++++++++++++++++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-berlin.c | 131 ++++++++++++
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci_hdrc_usb2.c | 137 +++++++++++++
16 files changed, 698 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
create mode 100644 drivers/phy/phy-berlin-usb.c
create mode 100644 drivers/reset/reset-berlin.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: antoine.tenart@free-electrons.com (Antoine Tenart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/12] ARM: berlin: USB support
Date: Wed, 3 Sep 2014 09:48:19 +0200 [thread overview]
Message-ID: <1409730511-16101-1-git-send-email-antoine.tenart@free-electrons.com> (raw)
This series adds the support for ChipIdea USB2 (ci13xxx) controllers,
the USB PHYs of the Marvell Berlin SoCs and also adds a reset
controller for these SoCs.
The reset controller is used by the PHY driver and shares the
existing chip controller node with the clocks and one pin controller.
The Marvell Berlin USB controllers are host only on the BG2Q and are
compatible with USB ChipIdea. We here add a glue to use the available
common functions for this kind of controllers, and add a generic USB2
ChipIdea driver. A PHY driver is also added to control the USB PHY.
This series applies on top of the generic PHY support in the USB
framework[1].
Changes since v3:
- removed the DMA mask property
- moved the clock handling in the common probe function
- fixed the documentation for the USB2 ChipIdea USB PHY binding
- made sure the reset bit is 0-31 in the reset driver
Changes since v2:
- moved the PHY driver to the generic PHY framework
- changed the compatible to 'chipidea,usb2'
- added a property to set the DMA mask in the USB2 CI driver
- separated dt specific calls in the CI probing function
- rebased on top of the generic PHY support for CI[1]
Changes since v1:
- made the Berlin CI USB driver a generic one
- added support to custom offset for the reset register
- added fixed regulators to support supply the VBUS
- modified the PHY driver to support the one one the BG2CD as
well
- documented the reset properties
- added bindings for the BG2CD
- cosmetic fixes
[1] git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy
https://lkml.org/lkml/2014/9/3/78
Antoine Tenart (10):
reset: add the Berlin reset controller driver
Documentation: bindings: add reset bindings docs for Marvell Berlin
SoCs
ARM: Berlin: select the reset controller
ARM: dts: berlin: add a required reset property in the chip controller
node
phy: add the Berlin USB PHY driver
Documentation: bindings: add doc for the Berlin USB PHY
usb: chipidea: add a usb2 driver for ci13xxx
Documentation: bindings: add doc for the USB2 ChipIdea USB driver
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP
Sebastian Hesselbarth (2):
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: berlin: enable USB on the Google Chromecast
.../devicetree/bindings/arm/marvell,berlin.txt | 10 +
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 ++
arch/arm/boot/dts/berlin2.dtsi | 1 +
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 4 +
arch/arm/boot/dts/berlin2cd.dtsi | 35 ++++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 +++++
arch/arm/boot/dts/berlin2q.dtsi | 53 +++++
arch/arm/mach-berlin/Kconfig | 2 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-usb.c | 224 +++++++++++++++++++++
drivers/reset/Makefile | 1 +
drivers/reset/reset-berlin.c | 131 ++++++++++++
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci_hdrc_usb2.c | 137 +++++++++++++
16 files changed, 698 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
create mode 100644 drivers/phy/phy-berlin-usb.c
create mode 100644 drivers/reset/reset-berlin.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c
--
1.9.1
next reply other threads:[~2014-09-03 7:48 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-03 7:48 Antoine Tenart [this message]
2014-09-03 7:48 ` [PATCH v4 00/12] ARM: berlin: USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 01/12] reset: add the Berlin reset controller driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 21:01 ` Sebastian Hesselbarth
2014-09-03 21:01 ` Sebastian Hesselbarth
2014-09-03 21:01 ` Sebastian Hesselbarth
2014-09-03 7:48 ` [PATCH v4 02/12] Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 03/12] ARM: Berlin: select the reset controller Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 04/12] ARM: dts: berlin: add a required reset property in the chip controller node Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 05/12] phy: add the Berlin USB PHY driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 06/12] Documentation: bindings: add doc for the Berlin USB PHY Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 07/12] usb: chipidea: add a usb2 driver for ci13xxx Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-11 1:07 ` Peter Chen
2014-09-11 1:07 ` Peter Chen
2014-09-11 1:07 ` Peter Chen
2014-09-11 15:31 ` Antoine Tenart
2014-09-11 15:31 ` Antoine Tenart
2014-09-11 15:31 ` Antoine Tenart
2014-09-12 0:05 ` Peter Chen
2014-09-12 0:05 ` Peter Chen
2014-09-12 0:05 ` Peter Chen
2014-09-03 7:48 ` [PATCH v4 08/12] Documentation: bindings: add doc for the USB2 ChipIdea USB driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-11 1:09 ` Peter Chen
2014-09-11 1:09 ` Peter Chen
2014-09-11 1:09 ` Peter Chen
2014-09-03 7:48 ` [PATCH v4 09/12] ARM: dts: berlin: add BG2Q nodes for USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 10/12] ARM: dts: Berlin: enable USB on the BG2Q DMP Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 11/12] ARM: dts: berlin: add BG2CD nodes for USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 12/12] ARM: dts: berlin: enable USB on the Google Chromecast Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409730511-16101-1-git-send-email-antoine.tenart@free-electrons.com \
--to=antoine.tenart@free-electrons.com \
--cc=Peter.Chen@freescale.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=zmxu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.