From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Antoine Tenart <antoine.tenart@free-electrons.com>,
Peter.Chen@freescale.com, balbi@ti.com, p.zabel@pengutronix.de
Cc: alexandre.belloni@free-electrons.com,
thomas.petazzoni@free-electrons.com, zmxu@marvell.com,
jszhang@marvell.com, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 01/12] reset: add the Berlin reset controller driver
Date: Wed, 03 Sep 2014 23:01:15 +0200 [thread overview]
Message-ID: <5407819B.2060605@gmail.com> (raw)
In-Reply-To: <1409730511-16101-2-git-send-email-antoine.tenart@free-electrons.com>
On 09/03/2014 09:48 AM, Antoine Tenart wrote:
> Add a reset controller for Marvell Berlin SoCs which is used by the
> USB PHYs drivers (for now).
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-berlin.c | 131 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 132 insertions(+)
> create mode 100644 drivers/reset/reset-berlin.c
I guess the reset stuff is quite independent from usb-phy and can
be picked up now.
Applied
01/12 and 03/12 to berlin/soc and
02/12 and 04/12 to berlin/dt.
Thanks!
For the usb-phy dts patches, I'll wait for the corresponding genphy
patches.
Sebastian
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Antoine Tenart
<antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Peter.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
zmxu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org,
jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 01/12] reset: add the Berlin reset controller driver
Date: Wed, 03 Sep 2014 23:01:15 +0200 [thread overview]
Message-ID: <5407819B.2060605@gmail.com> (raw)
In-Reply-To: <1409730511-16101-2-git-send-email-antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
On 09/03/2014 09:48 AM, Antoine Tenart wrote:
> Add a reset controller for Marvell Berlin SoCs which is used by the
> USB PHYs drivers (for now).
>
> Signed-off-by: Antoine Tenart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-berlin.c | 131 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 132 insertions(+)
> create mode 100644 drivers/reset/reset-berlin.c
I guess the reset stuff is quite independent from usb-phy and can
be picked up now.
Applied
01/12 and 03/12 to berlin/soc and
02/12 and 04/12 to berlin/dt.
Thanks!
For the usb-phy dts patches, I'll wait for the corresponding genphy
patches.
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 01/12] reset: add the Berlin reset controller driver
Date: Wed, 03 Sep 2014 23:01:15 +0200 [thread overview]
Message-ID: <5407819B.2060605@gmail.com> (raw)
In-Reply-To: <1409730511-16101-2-git-send-email-antoine.tenart@free-electrons.com>
On 09/03/2014 09:48 AM, Antoine Tenart wrote:
> Add a reset controller for Marvell Berlin SoCs which is used by the
> USB PHYs drivers (for now).
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-berlin.c | 131 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 132 insertions(+)
> create mode 100644 drivers/reset/reset-berlin.c
I guess the reset stuff is quite independent from usb-phy and can
be picked up now.
Applied
01/12 and 03/12 to berlin/soc and
02/12 and 04/12 to berlin/dt.
Thanks!
For the usb-phy dts patches, I'll wait for the corresponding genphy
patches.
Sebastian
next prev parent reply other threads:[~2014-09-03 21:01 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-03 7:48 [PATCH v4 00/12] ARM: berlin: USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 01/12] reset: add the Berlin reset controller driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 21:01 ` Sebastian Hesselbarth [this message]
2014-09-03 21:01 ` Sebastian Hesselbarth
2014-09-03 21:01 ` Sebastian Hesselbarth
2014-09-03 7:48 ` [PATCH v4 02/12] Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 03/12] ARM: Berlin: select the reset controller Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 04/12] ARM: dts: berlin: add a required reset property in the chip controller node Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 05/12] phy: add the Berlin USB PHY driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 06/12] Documentation: bindings: add doc for the Berlin USB PHY Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 07/12] usb: chipidea: add a usb2 driver for ci13xxx Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-11 1:07 ` Peter Chen
2014-09-11 1:07 ` Peter Chen
2014-09-11 1:07 ` Peter Chen
2014-09-11 15:31 ` Antoine Tenart
2014-09-11 15:31 ` Antoine Tenart
2014-09-11 15:31 ` Antoine Tenart
2014-09-12 0:05 ` Peter Chen
2014-09-12 0:05 ` Peter Chen
2014-09-12 0:05 ` Peter Chen
2014-09-03 7:48 ` [PATCH v4 08/12] Documentation: bindings: add doc for the USB2 ChipIdea USB driver Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-11 1:09 ` Peter Chen
2014-09-11 1:09 ` Peter Chen
2014-09-11 1:09 ` Peter Chen
2014-09-03 7:48 ` [PATCH v4 09/12] ARM: dts: berlin: add BG2Q nodes for USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 10/12] ARM: dts: Berlin: enable USB on the BG2Q DMP Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 11/12] ARM: dts: berlin: add BG2CD nodes for USB support Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` [PATCH v4 12/12] ARM: dts: berlin: enable USB on the Google Chromecast Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
2014-09-03 7:48 ` Antoine Tenart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5407819B.2060605@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=Peter.Chen@freescale.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=antoine.tenart@free-electrons.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=thomas.petazzoni@free-electrons.com \
--cc=zmxu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.