* [PATCH 00/45] staging: comedi: fix up some driver comments
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Most comedi drivers have a special comedi driver comment block,
information from which can be extracted by some scripts for use in the
"Comedilib" manual and the list of supported devices on the comedi web
site. (Currently, the information for those places comes from the
"out-of-tree" comedi drivers.)
The "Devices:" line (and continuation lines) are supposed to be a
comma-(and space)-separated list with the first item in this format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and "(comedi-board-name)" parts can be omitted from
subsequent list items to decrease verbosity, in which case they are
assumed to be the same as the preceding item.
Several comedi drivers have the "Devices:" line formatted incorrectly,
often with the use of square brackets and parentheses reversed. A few
comedi modules have driver comments, but are just support modules for
other drivers, so don't really need a driver comment.
01) staging: comedi: 8255_pci: rewrite comedi driver comment block
02) staging: comedi: adl_pci6208: rewrite "Devices:" line
03) staging: comedi: adl_pci7x3x: rewrite comedi driver comment block
04) staging: comedi: adl_pci8164: rewrite "Devices:" line
05) staging: comedi: adv_pci1723: rewrite "Devices:" line
06) staging: comedi: adv_pci1724: rewrite "Devices:" line
07) staging: comedi: c6xdigio: rewrite "Devices:" line
08) staging: comedi: cb_pcidda: rewrite "Devices:" line
09) staging: comedi: comedi_parport: rewrite "Devices:" line
10) staging: comedi: dac02: rewrite "Devices:" line
11) staging: comedi: das08: remove comedi driver comment block
12) staging: comedi: das08_isa: rewrite "Devices:" line
13) staging: comedi: das08_pci: rewrite "Devices:" line
14) staging: comedi: das16: rewrite "Devices:" line
15) staging: comedi: das6402: rewrite "Devices:" line
16) staging: comedi: dmm32at: rewrite "Devices:" line
17) staging: comedi: dt282x: rewrite "Devices:" line
18) staging: comedi: dyna_pci10xx: rewrite comedi driver comment block
19) staging: comedi: ii_pci20kc: rewrite "Devices:" line
20) staging: comedi: ke_counter: rewrite "Devices:" line
21) staging: comedi: me_daq: rewrite "Devices:" line
22) staging: comedi: mf6x4: rewrite "Devices:" line
23) staging: comedi: ni_6527: rewrite "Devices:" line
24) staging: comedi: ni_65xx: rewrite "Devices:" line
25) staging: comedi: ni_65xx: use board names on "Devices:" line
26) staging: comedi: ni_at_ao: rewrite "Devices:" line
27) staging: comedi: ni_labpc: rewrite "Devices:" line
28) staging: comedi: ni_labpc_pci: rewrite "Devices:" line
29) staging: comedi: ni_tio: change comedi "driver" comment to "module"
30) staging: comedi: ni_tiocmd: change comedi "driver" comment to
"module"
31) staging: comedi: pcl711: rewrite "Devices:" line
32) staging: comedi: pcl724: rewrite "Devices:" line
33) staging: comedi: pcl726: rewrite "Devices:" line
34) staging: comedi: pcl730: rewrite "Devices:" line
35) staging: comedi: pcmad: rewrite "Devices:" line
36) staging: comedi: pcmda12: rewrite "Devices:" line
37) staging: comedi: pcmmio: rewrite "Devices:" line
38) staging: comedi: pcmuio: rewrite "Devices:" line
39) staging: comedi: rtd520: rewrite "Devices:" line
40) staging: comedi: rti800: rewrite "Devices:" line
41) staging: comedi: rti802: rewrite "Devices:" line
42) staging: comedi: usbdux: rewrite "Devices:" line
43) staging: comedi: usbduxfast: rewrite "Devices:" line
44) staging: comedi: usbduxsigma: rewrite "Devices:" line
45) staging: comedi: vm80xx: rewrite comedi driver comment block
drivers/staging/comedi/drivers/8255_pci.c | 65 +++++++++++++++----------
drivers/staging/comedi/drivers/adl_pci6208.c | 3 +-
drivers/staging/comedi/drivers/adl_pci7x3x.c | 62 +++++++++++------------
drivers/staging/comedi/drivers/adl_pci8164.c | 2 +-
drivers/staging/comedi/drivers/adv_pci1723.c | 2 +-
drivers/staging/comedi/drivers/adv_pci1724.c | 2 +-
drivers/staging/comedi/drivers/c6xdigio.c | 2 +-
drivers/staging/comedi/drivers/cb_pcidda.c | 10 ++--
drivers/staging/comedi/drivers/comedi_parport.c | 2 +-
drivers/staging/comedi/drivers/dac02.c | 2 +-
drivers/staging/comedi/drivers/das08.c | 17 +------
drivers/staging/comedi/drivers/das08_isa.c | 18 +++----
drivers/staging/comedi/drivers/das08_pci.c | 2 +-
drivers/staging/comedi/drivers/das16.c | 33 +++++--------
drivers/staging/comedi/drivers/das6402.c | 4 +-
drivers/staging/comedi/drivers/dmm32at.c | 2 +-
drivers/staging/comedi/drivers/dt282x.c | 22 +++------
drivers/staging/comedi/drivers/dyna_pci10xx.c | 35 +++++++------
drivers/staging/comedi/drivers/ii_pci20kc.c | 2 +-
drivers/staging/comedi/drivers/ke_counter.c | 2 +-
drivers/staging/comedi/drivers/me_daq.c | 3 +-
drivers/staging/comedi/drivers/mf6x4.c | 2 +-
drivers/staging/comedi/drivers/ni_6527.c | 3 +-
drivers/staging/comedi/drivers/ni_65xx.c | 30 +++---------
drivers/staging/comedi/drivers/ni_at_ao.c | 3 +-
drivers/staging/comedi/drivers/ni_labpc.c | 5 +-
drivers/staging/comedi/drivers/ni_labpc_pci.c | 2 +-
drivers/staging/comedi/drivers/ni_tio.c | 43 ++++++++--------
drivers/staging/comedi/drivers/ni_tiocmd.c | 43 ++++++++--------
drivers/staging/comedi/drivers/pcl711.c | 6 +--
drivers/staging/comedi/drivers/pcl724.c | 12 ++---
drivers/staging/comedi/drivers/pcl726.c | 7 +--
drivers/staging/comedi/drivers/pcl730.c | 19 +++-----
drivers/staging/comedi/drivers/pcmad.c | 3 +-
drivers/staging/comedi/drivers/pcmda12.c | 2 +-
drivers/staging/comedi/drivers/pcmmio.c | 2 +-
drivers/staging/comedi/drivers/pcmuio.c | 3 +-
drivers/staging/comedi/drivers/rtd520.c | 6 +--
drivers/staging/comedi/drivers/rti800.c | 3 +-
drivers/staging/comedi/drivers/rti802.c | 2 +-
drivers/staging/comedi/drivers/usbdux.c | 3 +-
drivers/staging/comedi/drivers/usbduxfast.c | 2 +-
drivers/staging/comedi/drivers/usbduxsigma.c | 2 +-
drivers/staging/comedi/drivers/vmk80xx.c | 31 ++++++------
44 files changed, 224 insertions(+), 302 deletions(-)
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH 01/45] staging: comedi: 8255_pci: rewrite comedi driver comment block
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of DIO channels in each item
on the "Devices:" line. Move this information into separate paragraphs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/8255_pci.c | 65 ++++++++++++++++++-------------
1 file changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index 8b95898..9847642 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -22,33 +22,44 @@
*/
/*
-Driver: 8255_pci
-Description: Generic PCI based 8255 Digital I/O boards
-Devices: (ADLink) PCI-7224 [adl_pci-7224] - 24 channels
- (ADLink) PCI-7248 [adl_pci-7248] - 48 channels
- (ADLink) PCI-7296 [adl_pci-7296] - 96 channels
- (Measurement Computing) PCI-DIO24 [cb_pci-dio24] - 24 channels
- (Measurement Computing) PCI-DIO24H [cb_pci-dio24h] - 24 channels
- (Measurement Computing) PCI-DIO48H [cb_pci-dio48h] - 48 channels
- (Measurement Computing) PCI-DIO96H [cb_pci-dio96h] - 96 channels
- (National Instruments) PCI-DIO-96 [ni_pci-dio-96] - 96 channels
- (National Instruments) PCI-DIO-96B [ni_pci-dio-96b] - 96 channels
- (National Instruments) PXI-6508 [ni_pxi-6508] - 96 channels
- (National Instruments) PCI-6503 [ni_pci-6503] - 24 channels
- (National Instruments) PCI-6503B [ni_pci-6503b] - 24 channels
- (National Instruments) PCI-6503X [ni_pci-6503x] - 24 channels
- (National Instruments) PXI-6503 [ni_pxi-6503] - 24 channels
-Author: H Hartley Sweeten <hsweeten@visionengravers.com>
-Updated: Wed, 12 Sep 2012 11:52:01 -0700
-Status: untested
-
-Some of these boards also have an 8254 programmable timer/counter
-chip. This chip is not currently supported by this driver.
-
-Interrupt support for these boards is also not currently supported.
-
-Configuration Options: not applicable, uses PCI auto config
-*/
+ * Driver: 8255_pci
+ * Description: Generic PCI based 8255 Digital I/O boards
+ * Devices: [ADLink] PCI-7224 (adl_pci-7224), PCI-7248 (adl_pci-7248),
+ * PCI-7296 (adl_pci-7296),
+ * [Measurement Computing] PCI-DIO24 (cb_pci-dio24),
+ * PCI-DIO24H (cb_pci-dio24h), PCI-DIO48H (cb_pci-dio48h),
+ * PCI-DIO96H (cb_pci-dio96h),
+ * [National Instruments] PCI-DIO-96 (ni_pci-dio-96),
+ * PCI-DIO-96B (ni_pci-dio-96b), PXI-6508 (ni_pxi-6508),
+ * PCI-6503 (ni_pci-6503), PCI-6503B (ni_pci-6503b),
+ * PCI-6503X (ni_pci-6503x), PXI-6503 (ni_pxi-6503)
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Wed, 12 Sep 2012 11:52:01 -0700
+ * Status: untested
+ *
+ * These boards have one or more 8255 digital I/O chips, each of which
+ * is supported as a separate 24-channel DIO subdevice.
+ *
+ * Boards with 24 DIO channels (1 DIO subdevice):
+ *
+ * PCI-7224, PCI-DIO24, PCI-DIO24H, PCI-6503, PCI-6503B, PCI-6503X,
+ * PXI-6503
+ *
+ * Boards with 48 DIO channels (2 DIO subdevices):
+ *
+ * PCI-7248, PCI-DIO48H
+ *
+ * Boards with 96 DIO channels (4 DIO subdevices):
+ *
+ * PCI-7296, PCI-DIO96H, PCI-DIO-96, PCI-DIO-96B, PXI-6508
+ *
+ * Some of these boards also have an 8254 programmable timer/counter
+ * chip. This chip is not currently supported by this driver.
+ *
+ * Interrupt support for these boards is also not currently supported.
+ *
+ * Configuration Options: not applicable, uses PCI auto config.
+ */
#include <linux/module.h>
#include <linux/pci.h>
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 01/45] staging: comedi: 8255_pci: rewrite comedi driver comment block
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of DIO channels in each item
on the "Devices:" line. Move this information into separate paragraphs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/8255_pci.c | 65 ++++++++++++++++++-------------
1 file changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index 8b95898..9847642 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -22,33 +22,44 @@
*/
/*
-Driver: 8255_pci
-Description: Generic PCI based 8255 Digital I/O boards
-Devices: (ADLink) PCI-7224 [adl_pci-7224] - 24 channels
- (ADLink) PCI-7248 [adl_pci-7248] - 48 channels
- (ADLink) PCI-7296 [adl_pci-7296] - 96 channels
- (Measurement Computing) PCI-DIO24 [cb_pci-dio24] - 24 channels
- (Measurement Computing) PCI-DIO24H [cb_pci-dio24h] - 24 channels
- (Measurement Computing) PCI-DIO48H [cb_pci-dio48h] - 48 channels
- (Measurement Computing) PCI-DIO96H [cb_pci-dio96h] - 96 channels
- (National Instruments) PCI-DIO-96 [ni_pci-dio-96] - 96 channels
- (National Instruments) PCI-DIO-96B [ni_pci-dio-96b] - 96 channels
- (National Instruments) PXI-6508 [ni_pxi-6508] - 96 channels
- (National Instruments) PCI-6503 [ni_pci-6503] - 24 channels
- (National Instruments) PCI-6503B [ni_pci-6503b] - 24 channels
- (National Instruments) PCI-6503X [ni_pci-6503x] - 24 channels
- (National Instruments) PXI-6503 [ni_pxi-6503] - 24 channels
-Author: H Hartley Sweeten <hsweeten@visionengravers.com>
-Updated: Wed, 12 Sep 2012 11:52:01 -0700
-Status: untested
-
-Some of these boards also have an 8254 programmable timer/counter
-chip. This chip is not currently supported by this driver.
-
-Interrupt support for these boards is also not currently supported.
-
-Configuration Options: not applicable, uses PCI auto config
-*/
+ * Driver: 8255_pci
+ * Description: Generic PCI based 8255 Digital I/O boards
+ * Devices: [ADLink] PCI-7224 (adl_pci-7224), PCI-7248 (adl_pci-7248),
+ * PCI-7296 (adl_pci-7296),
+ * [Measurement Computing] PCI-DIO24 (cb_pci-dio24),
+ * PCI-DIO24H (cb_pci-dio24h), PCI-DIO48H (cb_pci-dio48h),
+ * PCI-DIO96H (cb_pci-dio96h),
+ * [National Instruments] PCI-DIO-96 (ni_pci-dio-96),
+ * PCI-DIO-96B (ni_pci-dio-96b), PXI-6508 (ni_pxi-6508),
+ * PCI-6503 (ni_pci-6503), PCI-6503B (ni_pci-6503b),
+ * PCI-6503X (ni_pci-6503x), PXI-6503 (ni_pxi-6503)
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Wed, 12 Sep 2012 11:52:01 -0700
+ * Status: untested
+ *
+ * These boards have one or more 8255 digital I/O chips, each of which
+ * is supported as a separate 24-channel DIO subdevice.
+ *
+ * Boards with 24 DIO channels (1 DIO subdevice):
+ *
+ * PCI-7224, PCI-DIO24, PCI-DIO24H, PCI-6503, PCI-6503B, PCI-6503X,
+ * PXI-6503
+ *
+ * Boards with 48 DIO channels (2 DIO subdevices):
+ *
+ * PCI-7248, PCI-DIO48H
+ *
+ * Boards with 96 DIO channels (4 DIO subdevices):
+ *
+ * PCI-7296, PCI-DIO96H, PCI-DIO-96, PCI-DIO-96B, PXI-6508
+ *
+ * Some of these boards also have an 8254 programmable timer/counter
+ * chip. This chip is not currently supported by this driver.
+ *
+ * Interrupt support for these boards is also not currently supported.
+ *
+ * Configuration Options: not applicable, uses PCI auto config.
+ */
#include <linux/module.h>
#include <linux/pci.h>
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 02/45] staging: comedi: adl_pci6208: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adl_pci6208.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 528f15c..a3ea4b7 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -19,8 +19,7 @@
/*
* Driver: adl_pci6208
* Description: ADLink PCI-6208/6216 Series Multi-channel Analog Output Cards
- * Devices: (ADLink) PCI-6208 [adl_pci6208]
- * (ADLink) PCI-6216 [adl_pci6216]
+ * Devices: [ADLink] PCI-6208 (adl_pci6208), PCI-6216 (adl_pci6216)
* Author: nsyeow <nsyeow@pd.jaring.my>
* Updated: Fri, 30 Jan 2004 14:44:27 +0800
* Status: untested
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 02/45] staging: comedi: adl_pci6208: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/adl_pci6208.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 528f15c..a3ea4b7 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -19,8 +19,7 @@
/*
* Driver: adl_pci6208
* Description: ADLink PCI-6208/6216 Series Multi-channel Analog Output Cards
- * Devices: (ADLink) PCI-6208 [adl_pci6208]
- * (ADLink) PCI-6216 [adl_pci6216]
+ * Devices: [ADLink] PCI-6208 (adl_pci6208), PCI-6216 (adl_pci6216)
* Author: nsyeow <nsyeow@pd.jaring.my>
* Updated: Fri, 30 Jan 2004 14:44:27 +0800
* Status: untested
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 03/45] staging: comedi: adl_pci7x3x: rewrite comedi driver comment block
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of input and output channels
in each item on the "Devices:" line. Move this information into a
separate paragraph moved from a block comment found elsewhere in the
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adl_pci7x3x.c | 62 +++++++++++++---------------
1 file changed, 29 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index fb8e5f5..618e641 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -22,27 +22,35 @@
*/
/*
-Driver: adl_pci7x3x
-Description: 32/64-Channel Isolated Digital I/O Boards
-Devices: (ADLink) PCI-7230 [adl_pci7230] - 16 input / 16 output
- (ADLink) PCI-7233 [adl_pci7233] - 32 input
- (ADLink) PCI-7234 [adl_pci7234] - 32 output
- (ADLink) PCI-7432 [adl_pci7432] - 32 input / 32 output
- (ADLink) PCI-7433 [adl_pci7433] - 64 input
- (ADLink) PCI-7434 [adl_pci7434] - 64 output
-Author: H Hartley Sweeten <hsweeten@visionengravers.com>
-Updated: Thu, 02 Aug 2012 14:27:46 -0700
-Status: untested
-
-The PCI-7230, PCI-7432 and PCI-7433 boards also support external
-interrupt signals on digital input channels 0 and 1. The PCI-7233
-has dual-interrupt sources for change-of-state (COS) on any 16
-digital input channels of LSB and for COS on any 16 digital input
-lines of MSB. Interrupts are not currently supported by this
-driver.
-
-Configuration Options: not applicable, uses comedi PCI auto config
-*/
+ * Driver: adl_pci7x3x
+ * Description: 32/64-Channel Isolated Digital I/O Boards
+ * Devices: [ADLink] PCI-7230 (adl_pci7230), PCI-7233 (adl_pci7233),
+ * PCI-7234 (adl_pci7234), PCI-7432 (adl_pci7432), PCI-7433 (adl_pci7433),
+ * PCI-7434 (adl_pci7434)
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Thu, 02 Aug 2012 14:27:46 -0700
+ * Status: untested
+ *
+ * One or two subdevices are setup by this driver depending on
+ * the number of digital inputs and/or outputs provided by the
+ * board. Each subdevice has a maximum of 32 channels.
+ *
+ * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
+ * PCI-7233 - 1 subdevice: 0 - 32 input
+ * PCI-7234 - 1 subdevice: 0 - 32 output
+ * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
+ * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
+ * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
+ *
+ * The PCI-7230, PCI-7432 and PCI-7433 boards also support external
+ * interrupt signals on digital input channels 0 and 1. The PCI-7233
+ * has dual-interrupt sources for change-of-state (COS) on any 16
+ * digital input channels of LSB and for COS on any 16 digital input
+ * lines of MSB. Interrupts are not currently supported by this
+ * driver.
+ *
+ * Configuration Options: not applicable, uses comedi PCI auto config
+ */
#include <linux/module.h>
#include <linux/pci.h>
@@ -155,18 +163,6 @@ static int adl_pci7x3x_auto_attach(struct comedi_device *dev,
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
- /*
- * One or two subdevices are setup by this driver depending on
- * the number of digital inputs and/or outputs provided by the
- * board. Each subdevice has a maximum of 32 channels.
- *
- * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
- * PCI-7233 - 1 subdevice: 0 - 32 input
- * PCI-7234 - 1 subdevice: 0 - 32 output
- * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
- * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
- * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
- */
ret = comedi_alloc_subdevices(dev, board->nsubdevs);
if (ret)
return ret;
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 03/45] staging: comedi: adl_pci7x3x: rewrite comedi driver comment block
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of input and output channels
in each item on the "Devices:" line. Move this information into a
separate paragraph moved from a block comment found elsewhere in the
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/adl_pci7x3x.c | 62 +++++++++++++---------------
1 file changed, 29 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c
index fb8e5f5..618e641 100644
--- a/drivers/staging/comedi/drivers/adl_pci7x3x.c
+++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c
@@ -22,27 +22,35 @@
*/
/*
-Driver: adl_pci7x3x
-Description: 32/64-Channel Isolated Digital I/O Boards
-Devices: (ADLink) PCI-7230 [adl_pci7230] - 16 input / 16 output
- (ADLink) PCI-7233 [adl_pci7233] - 32 input
- (ADLink) PCI-7234 [adl_pci7234] - 32 output
- (ADLink) PCI-7432 [adl_pci7432] - 32 input / 32 output
- (ADLink) PCI-7433 [adl_pci7433] - 64 input
- (ADLink) PCI-7434 [adl_pci7434] - 64 output
-Author: H Hartley Sweeten <hsweeten@visionengravers.com>
-Updated: Thu, 02 Aug 2012 14:27:46 -0700
-Status: untested
-
-The PCI-7230, PCI-7432 and PCI-7433 boards also support external
-interrupt signals on digital input channels 0 and 1. The PCI-7233
-has dual-interrupt sources for change-of-state (COS) on any 16
-digital input channels of LSB and for COS on any 16 digital input
-lines of MSB. Interrupts are not currently supported by this
-driver.
-
-Configuration Options: not applicable, uses comedi PCI auto config
-*/
+ * Driver: adl_pci7x3x
+ * Description: 32/64-Channel Isolated Digital I/O Boards
+ * Devices: [ADLink] PCI-7230 (adl_pci7230), PCI-7233 (adl_pci7233),
+ * PCI-7234 (adl_pci7234), PCI-7432 (adl_pci7432), PCI-7433 (adl_pci7433),
+ * PCI-7434 (adl_pci7434)
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Thu, 02 Aug 2012 14:27:46 -0700
+ * Status: untested
+ *
+ * One or two subdevices are setup by this driver depending on
+ * the number of digital inputs and/or outputs provided by the
+ * board. Each subdevice has a maximum of 32 channels.
+ *
+ * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
+ * PCI-7233 - 1 subdevice: 0 - 32 input
+ * PCI-7234 - 1 subdevice: 0 - 32 output
+ * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
+ * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
+ * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
+ *
+ * The PCI-7230, PCI-7432 and PCI-7433 boards also support external
+ * interrupt signals on digital input channels 0 and 1. The PCI-7233
+ * has dual-interrupt sources for change-of-state (COS) on any 16
+ * digital input channels of LSB and for COS on any 16 digital input
+ * lines of MSB. Interrupts are not currently supported by this
+ * driver.
+ *
+ * Configuration Options: not applicable, uses comedi PCI auto config
+ */
#include <linux/module.h>
#include <linux/pci.h>
@@ -155,18 +163,6 @@ static int adl_pci7x3x_auto_attach(struct comedi_device *dev,
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
- /*
- * One or two subdevices are setup by this driver depending on
- * the number of digital inputs and/or outputs provided by the
- * board. Each subdevice has a maximum of 32 channels.
- *
- * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output
- * PCI-7233 - 1 subdevice: 0 - 32 input
- * PCI-7234 - 1 subdevice: 0 - 32 output
- * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output
- * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input
- * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output
- */
ret = comedi_alloc_subdevices(dev, board->nsubdevs);
if (ret)
return ret;
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 04/45] staging: comedi: adl_pci8164: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adl_pci8164.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 72bccb4..cc6c53b 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -18,7 +18,7 @@
/*
* Driver: adl_pci8164
* Description: Driver for the Adlink PCI-8164 4 Axes Motion Control board
- * Devices: (ADLink) PCI-8164 [adl_pci8164]
+ * Devices: [ADLink] PCI-8164 (adl_pci8164)
* Author: Michel Lachaine <mike@mikelachaine.ca>
* Status: experimental
* Updated: Mon, 14 Apr 2008 15:10:32 +0100
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 04/45] staging: comedi: adl_pci8164: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/adl_pci8164.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 72bccb4..cc6c53b 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -18,7 +18,7 @@
/*
* Driver: adl_pci8164
* Description: Driver for the Adlink PCI-8164 4 Axes Motion Control board
- * Devices: (ADLink) PCI-8164 [adl_pci8164]
+ * Devices: [ADLink] PCI-8164 (adl_pci8164)
* Author: Michel Lachaine <mike@mikelachaine.ca>
* Status: experimental
* Updated: Mon, 14 Apr 2008 15:10:32 +0100
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 05/45] staging: comedi: adv_pci1723: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adv_pci1723.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 65f854e..f1945be 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -20,7 +20,7 @@
* Driver: adv_pci1723
* Description: Advantech PCI-1723
* Author: yonggang <rsmgnu@gmail.com>, Ian Abbott <abbotti@mev.co.uk>
- * Devices: (Advantech) PCI-1723 [adv_pci1723]
+ * Devices: [Advantech] PCI-1723 (adv_pci1723)
* Updated: Mon, 14 Apr 2008 15:12:56 +0100
* Status: works
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 05/45] staging: comedi: adv_pci1723: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/adv_pci1723.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 65f854e..f1945be 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -20,7 +20,7 @@
* Driver: adv_pci1723
* Description: Advantech PCI-1723
* Author: yonggang <rsmgnu@gmail.com>, Ian Abbott <abbotti@mev.co.uk>
- * Devices: (Advantech) PCI-1723 [adv_pci1723]
+ * Devices: [Advantech] PCI-1723 (adv_pci1723)
* Updated: Mon, 14 Apr 2008 15:12:56 +0100
* Status: works
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 06/45] staging: comedi: adv_pci1724: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/adv_pci1724.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1724.c b/drivers/staging/comedi/drivers/adv_pci1724.c
index a8d2840..a3573ea 100644
--- a/drivers/staging/comedi/drivers/adv_pci1724.c
+++ b/drivers/staging/comedi/drivers/adv_pci1724.c
@@ -22,7 +22,7 @@
/*
* Driver: adv_pci1724
* Description: Advantech PCI-1724U
- * Devices: (Advantech) PCI-1724U [adv_pci1724]
+ * Devices: [Advantech] PCI-1724U (adv_pci1724)
* Author: Frank Mori Hess <fmh6jj@gmail.com>
* Updated: 2013-02-09
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 06/45] staging: comedi: adv_pci1724: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/adv_pci1724.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1724.c b/drivers/staging/comedi/drivers/adv_pci1724.c
index a8d2840..a3573ea 100644
--- a/drivers/staging/comedi/drivers/adv_pci1724.c
+++ b/drivers/staging/comedi/drivers/adv_pci1724.c
@@ -22,7 +22,7 @@
/*
* Driver: adv_pci1724
* Description: Advantech PCI-1724U
- * Devices: (Advantech) PCI-1724U [adv_pci1724]
+ * Devices: [Advantech] PCI-1724U (adv_pci1724)
* Author: Frank Mori Hess <fmh6jj@gmail.com>
* Updated: 2013-02-09
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 07/45] staging: comedi: c6xdigio: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/c6xdigio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index e7cb703..1a109e3 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -22,7 +22,7 @@
* Description: Mechatronic Systems Inc. C6x_DIGIO DSP daughter card
* Author: Dan Block
* Status: unknown
- * Devices: (Mechatronic Systems Inc.) C6x_DIGIO DSP daughter card [c6xdigio]
+ * Devices: [Mechatronic Systems Inc.] C6x_DIGIO DSP daughter card (c6xdigio)
* Updated: Sun Nov 20 20:18:34 EST 2005
*
* Configuration Options:
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 07/45] staging: comedi: c6xdigio: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/c6xdigio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index e7cb703..1a109e3 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -22,7 +22,7 @@
* Description: Mechatronic Systems Inc. C6x_DIGIO DSP daughter card
* Author: Dan Block
* Status: unknown
- * Devices: (Mechatronic Systems Inc.) C6x_DIGIO DSP daughter card [c6xdigio]
+ * Devices: [Mechatronic Systems Inc.] C6x_DIGIO DSP daughter card (c6xdigio)
* Updated: Sun Nov 20 20:18:34 EST 2005
*
* Configuration Options:
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 08/45] staging: comedi: cb_pcidda: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/cb_pcidda.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 01875d7..2b2cfcd 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -22,12 +22,10 @@
/*
* Driver: cb_pcidda
* Description: MeasurementComputing PCI-DDA series
- * Devices: (Measurement Computing) PCI-DDA08/12 [pci-dda08/12]
- * (Measurement Computing) PCI-DDA04/12 [pci-dda04/12]
- * (Measurement Computing) PCI-DDA02/12 [pci-dda02/12]
- * (Measurement Computing) PCI-DDA08/16 [pci-dda08/16]
- * (Measurement Computing) PCI-DDA04/16 [pci-dda04/16]
- * (Measurement Computing) PCI-DDA02/16 [pci-dda02/16]
+ * Devices: [Measurement Computing] PCI-DDA08/12 (pci-dda08/12),
+ * PCI-DDA04/12 (pci-dda04/12), PCI-DDA02/12 (pci-dda02/12),
+ * PCI-DDA08/16 (pci-dda08/16), PCI-DDA04/16 (pci-dda04/16),
+ * PCI-DDA02/16 (pci-dda02/16)
* Author: Ivan Martinez <ivanmr@altavista.com>
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 08/45] staging: comedi: cb_pcidda: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/cb_pcidda.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 01875d7..2b2cfcd 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -22,12 +22,10 @@
/*
* Driver: cb_pcidda
* Description: MeasurementComputing PCI-DDA series
- * Devices: (Measurement Computing) PCI-DDA08/12 [pci-dda08/12]
- * (Measurement Computing) PCI-DDA04/12 [pci-dda04/12]
- * (Measurement Computing) PCI-DDA02/12 [pci-dda02/12]
- * (Measurement Computing) PCI-DDA08/16 [pci-dda08/16]
- * (Measurement Computing) PCI-DDA04/16 [pci-dda04/16]
- * (Measurement Computing) PCI-DDA02/16 [pci-dda02/16]
+ * Devices: [Measurement Computing] PCI-DDA08/12 (pci-dda08/12),
+ * PCI-DDA04/12 (pci-dda04/12), PCI-DDA02/12 (pci-dda02/12),
+ * PCI-DDA08/16 (pci-dda08/16), PCI-DDA04/16 (pci-dda04/16),
+ * PCI-DDA02/16 (pci-dda02/16)
* Author: Ivan Martinez <ivanmr@altavista.com>
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 09/45] staging: comedi: comedi_parport: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/comedi_parport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index 3bac903..ceef693 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -24,7 +24,7 @@
* Description: Standard PC parallel port
* Author: ds
* Status: works in immediate mode
- * Devices: (standard) parallel port [comedi_parport]
+ * Devices: [standard] parallel port (comedi_parport)
* Updated: Tue, 30 Apr 2002 21:11:45 -0700
*
* A cheap and easy way to get a few more digital I/O lines. Steal
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 09/45] staging: comedi: comedi_parport: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/comedi_parport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index 3bac903..ceef693 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -24,7 +24,7 @@
* Description: Standard PC parallel port
* Author: ds
* Status: works in immediate mode
- * Devices: (standard) parallel port [comedi_parport]
+ * Devices: [standard] parallel port (comedi_parport)
* Updated: Tue, 30 Apr 2002 21:11:45 -0700
*
* A cheap and easy way to get a few more digital I/O lines. Steal
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 10/45] staging: comedi: dac02: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/dac02.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/dac02.c b/drivers/staging/comedi/drivers/dac02.c
index beb36c8..a6798ad 100644
--- a/drivers/staging/comedi/drivers/dac02.c
+++ b/drivers/staging/comedi/drivers/dac02.c
@@ -24,7 +24,7 @@
/*
* Driver: dac02
* Description: Comedi driver for DAC02 compatible boards
- * Devices: (Keithley Metrabyte) DAC-02 [dac02]
+ * Devices: [Keithley Metrabyte] DAC-02 (dac02)
* Author: H Hartley Sweeten <hsweeten@visionengravers.com>
* Updated: Tue, 11 Mar 2014 11:27:19 -0700
* Status: unknown
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 10/45] staging: comedi: dac02: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/dac02.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/dac02.c b/drivers/staging/comedi/drivers/dac02.c
index beb36c8..a6798ad 100644
--- a/drivers/staging/comedi/drivers/dac02.c
+++ b/drivers/staging/comedi/drivers/dac02.c
@@ -24,7 +24,7 @@
/*
* Driver: dac02
* Description: Comedi driver for DAC02 compatible boards
- * Devices: (Keithley Metrabyte) DAC-02 [dac02]
+ * Devices: [Keithley Metrabyte] DAC-02 (dac02)
* Author: H Hartley Sweeten <hsweeten@visionengravers.com>
* Updated: Tue, 11 Mar 2014 11:27:19 -0700
* Status: unknown
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 11/45] staging: comedi: das08: remove comedi driver comment block
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
This is a module containing common code for the "das08_cs", "das08_isa"
and "das08_pci" comedi drivers. It does not need its own comedi
"driver" comment block, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das08.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 20a9f0e..c78c0df 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -1,6 +1,6 @@
/*
* comedi/drivers/das08.c
- * comedi driver for common DAS08 support (used by ISA/PCI/PCMCIA drivers)
+ * comedi module for common DAS08 support (used by ISA/PCI/PCMCIA drivers)
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
@@ -18,21 +18,6 @@
* GNU General Public License for more details.
*/
-/*
- * Driver: das08
- * Description: DAS-08 compatible boards
- * Devices: various, see das08_isa, das08_cs, and das08_pci drivers
- * Author: Warren Jasper, ds, Frank Hess
- * Updated: Fri, 31 Aug 2012 19:19:06 +0100
- * Status: works
- *
- * This driver is used by the das08_isa, das08_cs, and das08_pci
- * drivers to provide the common support for the DAS-08 hardware.
- *
- * The driver doesn't support asynchronous commands, since the
- * cheap das08 hardware doesn't really support them.
- */
-
#include <linux/module.h>
#include "../comedidev.h"
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 11/45] staging: comedi: das08: remove comedi driver comment block
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
This is a module containing common code for the "das08_cs", "das08_isa"
and "das08_pci" comedi drivers. It does not need its own comedi
"driver" comment block, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/das08.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 20a9f0e..c78c0df 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -1,6 +1,6 @@
/*
* comedi/drivers/das08.c
- * comedi driver for common DAS08 support (used by ISA/PCI/PCMCIA drivers)
+ * comedi module for common DAS08 support (used by ISA/PCI/PCMCIA drivers)
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
@@ -18,21 +18,6 @@
* GNU General Public License for more details.
*/
-/*
- * Driver: das08
- * Description: DAS-08 compatible boards
- * Devices: various, see das08_isa, das08_cs, and das08_pci drivers
- * Author: Warren Jasper, ds, Frank Hess
- * Updated: Fri, 31 Aug 2012 19:19:06 +0100
- * Status: works
- *
- * This driver is used by the das08_isa, das08_cs, and das08_pci
- * drivers to provide the common support for the DAS-08 hardware.
- *
- * The driver doesn't support asynchronous commands, since the
- * cheap das08 hardware doesn't really support them.
- */
-
#include <linux/module.h>
#include "../comedidev.h"
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 12/45] staging: comedi: das08_isa: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das08_isa.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08_isa.c b/drivers/staging/comedi/drivers/das08_isa.c
index e4ba268..2d9a31d 100644
--- a/drivers/staging/comedi/drivers/das08_isa.c
+++ b/drivers/staging/comedi/drivers/das08_isa.c
@@ -21,18 +21,12 @@
/*
* Driver: das08_isa
* Description: DAS-08 ISA/PC-104 compatible boards
- * Devices: (Keithley Metrabyte) DAS08 [isa-das08],
- * (ComputerBoards) DAS08 [isa-das08]
- * (ComputerBoards) DAS08-PGM [das08-pgm]
- * (ComputerBoards) DAS08-PGH [das08-pgh]
- * (ComputerBoards) DAS08-PGL [das08-pgl]
- * (ComputerBoards) DAS08-AOH [das08-aoh]
- * (ComputerBoards) DAS08-AOL [das08-aol]
- * (ComputerBoards) DAS08-AOM [das08-aom]
- * (ComputerBoards) DAS08/JR-AO [das08/jr-ao]
- * (ComputerBoards) DAS08/JR-16-AO [das08jr-16-ao]
- * (ComputerBoards) PC104-DAS08 [pc104-das08]
- * (ComputerBoards) DAS08/JR/16 [das08jr/16]
+ * Devices: [Keithley Metrabyte] DAS08 (isa-das08),
+ * [ComputerBoards] DAS08 (isa-das08), DAS08-PGM (das08-pgm),
+ * DAS08-PGH (das08-pgh), DAS08-PGL (das08-pgl), DAS08-AOH (das08-aoh),
+ * DAS08-AOL (das08-aol), DAS08-AOM (das08-aom), DAS08/JR-AO (das08/jr-ao),
+ * DAS08/JR-16-AO (das08jr-16-ao), PC104-DAS08 (pc104-das08),
+ * DAS08/JR/16 (das08jr/16)
* Author: Warren Jasper, ds, Frank Hess
* Updated: Fri, 31 Aug 2012 19:19:06 +0100
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 12/45] staging: comedi: das08_isa: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/das08_isa.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08_isa.c b/drivers/staging/comedi/drivers/das08_isa.c
index e4ba268..2d9a31d 100644
--- a/drivers/staging/comedi/drivers/das08_isa.c
+++ b/drivers/staging/comedi/drivers/das08_isa.c
@@ -21,18 +21,12 @@
/*
* Driver: das08_isa
* Description: DAS-08 ISA/PC-104 compatible boards
- * Devices: (Keithley Metrabyte) DAS08 [isa-das08],
- * (ComputerBoards) DAS08 [isa-das08]
- * (ComputerBoards) DAS08-PGM [das08-pgm]
- * (ComputerBoards) DAS08-PGH [das08-pgh]
- * (ComputerBoards) DAS08-PGL [das08-pgl]
- * (ComputerBoards) DAS08-AOH [das08-aoh]
- * (ComputerBoards) DAS08-AOL [das08-aol]
- * (ComputerBoards) DAS08-AOM [das08-aom]
- * (ComputerBoards) DAS08/JR-AO [das08/jr-ao]
- * (ComputerBoards) DAS08/JR-16-AO [das08jr-16-ao]
- * (ComputerBoards) PC104-DAS08 [pc104-das08]
- * (ComputerBoards) DAS08/JR/16 [das08jr/16]
+ * Devices: [Keithley Metrabyte] DAS08 (isa-das08),
+ * [ComputerBoards] DAS08 (isa-das08), DAS08-PGM (das08-pgm),
+ * DAS08-PGH (das08-pgh), DAS08-PGL (das08-pgl), DAS08-AOH (das08-aoh),
+ * DAS08-AOL (das08-aol), DAS08-AOM (das08-aom), DAS08/JR-AO (das08/jr-ao),
+ * DAS08/JR-16-AO (das08jr-16-ao), PC104-DAS08 (pc104-das08),
+ * DAS08/JR/16 (das08jr/16)
* Author: Warren Jasper, ds, Frank Hess
* Updated: Fri, 31 Aug 2012 19:19:06 +0100
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 13/45] staging: comedi: das08_pci: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das08_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/das08_pci.c b/drivers/staging/comedi/drivers/das08_pci.c
index 0987ce55..b2ea10b 100644
--- a/drivers/staging/comedi/drivers/das08_pci.c
+++ b/drivers/staging/comedi/drivers/das08_pci.c
@@ -21,7 +21,7 @@
/*
* Driver: das08_pci
* Description: DAS-08 PCI compatible boards
- * Devices: (ComputerBoards) PCI-DAS08 [pci-das08]
+ * Devices: [ComputerBoards] PCI-DAS08 (pci-das08)
* Author: Warren Jasper, ds, Frank Hess
* Updated: Fri, 31 Aug 2012 19:19:06 +0100
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 13/45] staging: comedi: das08_pci: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/das08_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/das08_pci.c b/drivers/staging/comedi/drivers/das08_pci.c
index 0987ce55..b2ea10b 100644
--- a/drivers/staging/comedi/drivers/das08_pci.c
+++ b/drivers/staging/comedi/drivers/das08_pci.c
@@ -21,7 +21,7 @@
/*
* Driver: das08_pci
* Description: DAS-08 PCI compatible boards
- * Devices: (ComputerBoards) PCI-DAS08 [pci-das08]
+ * Devices: [ComputerBoards] PCI-DAS08 (pci-das08)
* Author: Warren Jasper, ds, Frank Hess
* Updated: Fri, 31 Aug 2012 19:19:06 +0100
* Status: works
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 14/45] staging: comedi: das16: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das16.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 2436057..64b0ada 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -22,28 +22,17 @@
* Driver: das16
* Description: DAS16 compatible boards
* Author: Sam Moore, Warren Jasper, ds, Chris Baugher, Frank Hess, Roman Fietze
- * Devices: (Keithley Metrabyte) DAS-16 [das-16]
- * (Keithley Metrabyte) DAS-16G [das-16g]
- * (Keithley Metrabyte) DAS-16F [das-16f]
- * (Keithley Metrabyte) DAS-1201 [das-1201]
- * (Keithley Metrabyte) DAS-1202 [das-1202]
- * (Keithley Metrabyte) DAS-1401 [das-1401]
- * (Keithley Metrabyte) DAS-1402 [das-1402]
- * (Keithley Metrabyte) DAS-1601 [das-1601]
- * (Keithley Metrabyte) DAS-1602 [das-1602]
- * (ComputerBoards) PC104-DAS16/JR [pc104-das16jr]
- * (ComputerBoards) PC104-DAS16JR/16 [pc104-das16jr/16]
- * (ComputerBoards) CIO-DAS16 [cio-das16]
- * (ComputerBoards) CIO-DAS16F [cio-das16/f]
- * (ComputerBoards) CIO-DAS16/JR [cio-das16/jr]
- * (ComputerBoards) CIO-DAS16JR/16 [cio-das16jr/16]
- * (ComputerBoards) CIO-DAS1401/12 [cio-das1401/12]
- * (ComputerBoards) CIO-DAS1402/12 [cio-das1402/12]
- * (ComputerBoards) CIO-DAS1402/16 [cio-das1402/16]
- * (ComputerBoards) CIO-DAS1601/12 [cio-das1601/12]
- * (ComputerBoards) CIO-DAS1602/12 [cio-das1602/12]
- * (ComputerBoards) CIO-DAS1602/16 [cio-das1602/16]
- * (ComputerBoards) CIO-DAS16/330 [cio-das16/330]
+ * Devices: [Keithley Metrabyte] DAS-16 (das-16), DAS-16G (das-16g),
+ * DAS-16F (das-16f), DAS-1201 (das-1201), DAS-1202 (das-1202),
+ * DAS-1401 (das-1401), DAS-1402 (das-1402), DAS-1601 (das-1601),
+ * DAS-1602 (das-1602),
+ * [ComputerBoards] PC104-DAS16/JR (pc104-das16jr),
+ * PC104-DAS16JR/16 (pc104-das16jr/16), CIO-DAS16 (cio-das16),
+ * CIO-DAS16F (cio-das16/f), CIO-DAS16/JR (cio-das16/jr),
+ * CIO-DAS16JR/16 (cio-das16jr/16), CIO-DAS1401/12 (cio-das1401/12),
+ * CIO-DAS1402/12 (cio-das1402/12), CIO-DAS1402/16 (cio-das1402/16),
+ * CIO-DAS1601/12 (cio-das1601/12), CIO-DAS1602/12 (cio-das1602/12),
+ * CIO-DAS1602/16 (cio-das1602/16), CIO-DAS16/330 (cio-das16/330)
* Status: works
* Updated: 2003-10-12
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 14/45] staging: comedi: das16: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/das16.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 2436057..64b0ada 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -22,28 +22,17 @@
* Driver: das16
* Description: DAS16 compatible boards
* Author: Sam Moore, Warren Jasper, ds, Chris Baugher, Frank Hess, Roman Fietze
- * Devices: (Keithley Metrabyte) DAS-16 [das-16]
- * (Keithley Metrabyte) DAS-16G [das-16g]
- * (Keithley Metrabyte) DAS-16F [das-16f]
- * (Keithley Metrabyte) DAS-1201 [das-1201]
- * (Keithley Metrabyte) DAS-1202 [das-1202]
- * (Keithley Metrabyte) DAS-1401 [das-1401]
- * (Keithley Metrabyte) DAS-1402 [das-1402]
- * (Keithley Metrabyte) DAS-1601 [das-1601]
- * (Keithley Metrabyte) DAS-1602 [das-1602]
- * (ComputerBoards) PC104-DAS16/JR [pc104-das16jr]
- * (ComputerBoards) PC104-DAS16JR/16 [pc104-das16jr/16]
- * (ComputerBoards) CIO-DAS16 [cio-das16]
- * (ComputerBoards) CIO-DAS16F [cio-das16/f]
- * (ComputerBoards) CIO-DAS16/JR [cio-das16/jr]
- * (ComputerBoards) CIO-DAS16JR/16 [cio-das16jr/16]
- * (ComputerBoards) CIO-DAS1401/12 [cio-das1401/12]
- * (ComputerBoards) CIO-DAS1402/12 [cio-das1402/12]
- * (ComputerBoards) CIO-DAS1402/16 [cio-das1402/16]
- * (ComputerBoards) CIO-DAS1601/12 [cio-das1601/12]
- * (ComputerBoards) CIO-DAS1602/12 [cio-das1602/12]
- * (ComputerBoards) CIO-DAS1602/16 [cio-das1602/16]
- * (ComputerBoards) CIO-DAS16/330 [cio-das16/330]
+ * Devices: [Keithley Metrabyte] DAS-16 (das-16), DAS-16G (das-16g),
+ * DAS-16F (das-16f), DAS-1201 (das-1201), DAS-1202 (das-1202),
+ * DAS-1401 (das-1401), DAS-1402 (das-1402), DAS-1601 (das-1601),
+ * DAS-1602 (das-1602),
+ * [ComputerBoards] PC104-DAS16/JR (pc104-das16jr),
+ * PC104-DAS16JR/16 (pc104-das16jr/16), CIO-DAS16 (cio-das16),
+ * CIO-DAS16F (cio-das16/f), CIO-DAS16/JR (cio-das16/jr),
+ * CIO-DAS16JR/16 (cio-das16jr/16), CIO-DAS1401/12 (cio-das1401/12),
+ * CIO-DAS1402/12 (cio-das1402/12), CIO-DAS1402/16 (cio-das1402/16),
+ * CIO-DAS1601/12 (cio-das1601/12), CIO-DAS1602/12 (cio-das1602/12),
+ * CIO-DAS1602/16 (cio-das1602/16), CIO-DAS16/330 (cio-das16/330)
* Status: works
* Updated: 2003-10-12
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 15/45] staging: comedi: das6402: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das6402.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index 780f4f6..b8755b5 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -20,8 +20,8 @@
/*
* Driver: das6402
* Description: Keithley Metrabyte DAS6402 (& compatibles)
- * Devices: (Keithley Metrabyte) DAS6402-12 (das6402-12)
- * (Keithley Metrabyte) DAS6402-16 (das6402-16)
+ * Devices: [Keithley Metrabyte] DAS6402-12 (das6402-12),
+ * DAS6402-16 (das6402-16)
* Author: H Hartley Sweeten <hsweeten@visionengravers.com>
* Updated: Fri, 14 Mar 2014 10:18:43 -0700
* Status: unknown
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 15/45] staging: comedi: das6402: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/das6402.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index 780f4f6..b8755b5 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -20,8 +20,8 @@
/*
* Driver: das6402
* Description: Keithley Metrabyte DAS6402 (& compatibles)
- * Devices: (Keithley Metrabyte) DAS6402-12 (das6402-12)
- * (Keithley Metrabyte) DAS6402-16 (das6402-16)
+ * Devices: [Keithley Metrabyte] DAS6402-12 (das6402-12),
+ * DAS6402-16 (das6402-16)
* Author: H Hartley Sweeten <hsweeten@visionengravers.com>
* Updated: Fri, 14 Mar 2014 10:18:43 -0700
* Status: unknown
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 16/45] staging: comedi: dmm32at: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/dmm32at.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 6df298a..df17390 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -19,7 +19,7 @@
/*
* Driver: dmm32at
* Description: Diamond Systems Diamond-MM-32-AT
- * Devices: (Diamond Systems) Diamond-MM-32-AT [dmm32at]
+ * Devices: [Diamond Systems] Diamond-MM-32-AT (dmm32at)
* Author: Perry J. Piplani <perry.j.piplani@nasa.gov>
* Updated: Fri Jun 4 09:13:24 CDT 2004
* Status: experimental
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 16/45] staging: comedi: dmm32at: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/dmm32at.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 6df298a..df17390 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -19,7 +19,7 @@
/*
* Driver: dmm32at
* Description: Diamond Systems Diamond-MM-32-AT
- * Devices: (Diamond Systems) Diamond-MM-32-AT [dmm32at]
+ * Devices: [Diamond Systems] Diamond-MM-32-AT (dmm32at)
* Author: Perry J. Piplani <perry.j.piplani@nasa.gov>
* Updated: Fri Jun 4 09:13:24 CDT 2004
* Status: experimental
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 17/45] staging: comedi: dt282x: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/dt282x.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 2be98bb..cfa0f97 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -20,22 +20,12 @@
* Driver: dt282x
* Description: Data Translation DT2821 series (including DT-EZ)
* Author: ds
- * Devices: (Data Translation) DT2821 [dt2821]
- * (Data Translation) DT2821-F-16SE [dt2821-f]
- * (Data Translation) DT2821-F-8DI [dt2821-f]
- * (Data Translation) DT2821-G-16SE [dt2821-g]
- * (Data Translation) DT2821-G-8DI [dt2821-g]
- * (Data Translation) DT2823 [dt2823]
- * (Data Translation) DT2824-PGH [dt2824-pgh]
- * (Data Translation) DT2824-PGL [dt2824-pgl]
- * (Data Translation) DT2825 [dt2825]
- * (Data Translation) DT2827 [dt2827]
- * (Data Translation) DT2828 [dt2828]
- * (Data Translation) DT2928 [dt2829]
- * (Data Translation) DT21-EZ [dt21-ez]
- * (Data Translation) DT23-EZ [dt23-ez]
- * (Data Translation) DT24-EZ [dt24-ez]
- * (Data Translation) DT24-EZ-PGL [dt24-ez-pgl]
+ * Devices: [Data Translation] DT2821 (dt2821), DT2821-F-16SE (dt2821-f),
+ * DT2821-F-8DI (dt2821-f), DT2821-G-16SE (dt2821-g),
+ * DT2821-G-8DI (dt2821-g), DT2823 (dt2823), DT2824-PGH (dt2824-pgh),
+ * DT2824-PGL (dt2824-pgl), DT2825 (dt2825), DT2827 (dt2827),
+ * DT2828 (dt2828), DT2928 (dt2829), DT21-EZ (dt21-ez), DT23-EZ (dt23-ez),
+ * DT24-EZ (dt24-ez), DT24-EZ-PGL (dt24-ez-pgl)
* Status: complete
* Updated: Wed, 22 Aug 2001 17:11:34 -0700
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 17/45] staging: comedi: dt282x: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/dt282x.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 2be98bb..cfa0f97 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -20,22 +20,12 @@
* Driver: dt282x
* Description: Data Translation DT2821 series (including DT-EZ)
* Author: ds
- * Devices: (Data Translation) DT2821 [dt2821]
- * (Data Translation) DT2821-F-16SE [dt2821-f]
- * (Data Translation) DT2821-F-8DI [dt2821-f]
- * (Data Translation) DT2821-G-16SE [dt2821-g]
- * (Data Translation) DT2821-G-8DI [dt2821-g]
- * (Data Translation) DT2823 [dt2823]
- * (Data Translation) DT2824-PGH [dt2824-pgh]
- * (Data Translation) DT2824-PGL [dt2824-pgl]
- * (Data Translation) DT2825 [dt2825]
- * (Data Translation) DT2827 [dt2827]
- * (Data Translation) DT2828 [dt2828]
- * (Data Translation) DT2928 [dt2829]
- * (Data Translation) DT21-EZ [dt21-ez]
- * (Data Translation) DT23-EZ [dt23-ez]
- * (Data Translation) DT24-EZ [dt24-ez]
- * (Data Translation) DT24-EZ-PGL [dt24-ez-pgl]
+ * Devices: [Data Translation] DT2821 (dt2821), DT2821-F-16SE (dt2821-f),
+ * DT2821-F-8DI (dt2821-f), DT2821-G-16SE (dt2821-g),
+ * DT2821-G-8DI (dt2821-g), DT2823 (dt2823), DT2824-PGH (dt2824-pgh),
+ * DT2824-PGL (dt2824-pgl), DT2825 (dt2825), DT2827 (dt2827),
+ * DT2828 (dt2828), DT2928 (dt2829), DT21-EZ (dt21-ez), DT23-EZ (dt23-ez),
+ * DT24-EZ (dt24-ez), DT24-EZ-PGL (dt24-ez-pgl)
* Status: complete
* Updated: Wed, 22 Aug 2001 17:11:34 -0700
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 18/45] staging: comedi: dyna_pci10xx: rewrite comedi driver comment block
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Change the original "Devices:" line to a "Description:" line.
Remove the "Version:" line as we don't care about driver version numbers
in the kernel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/dyna_pci10xx.c | 35 +++++++++++++--------------
1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 1b6324c..6c1e442 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -14,24 +14,23 @@
*/
/*
- Driver: dyna_pci10xx
- Devices: Dynalog India PCI DAQ Cards, http://www.dynalogindia.com/
- Author: Prashant Shah <pshah.mumbai@gmail.com>
- Developed at Automation Labs, Chemical Dept., IIT Bombay, India.
- Prof. Kannan Moudgalya <kannan@iitb.ac.in>
- http://www.iitb.ac.in
- Status: Stable
- Version: 1.0
- Device Supported :
- - Dynalog PCI 1050
-
- Notes :
- - Dynalog India Pvt. Ltd. does not have a registered PCI Vendor ID and
- they are using the PLX Technlogies Vendor ID since that is the PCI Chip used
- in the card.
- - Dynalog India Pvt. Ltd. has provided the internal register specification for
- their cards in their manuals.
-*/
+ * Driver: dyna_pci10xx
+ * Description: Dynalog India PCI DAQ Cards, http://www.dynalogindia.com/
+ * Devices: [Dynalog] PCI-1050 (dyna_pci1050)
+ * Author: Prashant Shah <pshah.mumbai@gmail.com>
+ * Status: Stable
+ *
+ * Developed at Automation Labs, Chemical Dept., IIT Bombay, India.
+ * Prof. Kannan Moudgalya <kannan@iitb.ac.in>
+ * http://www.iitb.ac.in
+ *
+ * Notes :
+ * - Dynalog India Pvt. Ltd. does not have a registered PCI Vendor ID and
+ * they are using the PLX Technlogies Vendor ID since that is the PCI Chip
+ * used in the card.
+ * - Dynalog India Pvt. Ltd. has provided the internal register specification
+ * for their cards in their manuals.
+ */
#include <linux/module.h>
#include <linux/delay.h>
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 18/45] staging: comedi: dyna_pci10xx: rewrite comedi driver comment block
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Change the original "Devices:" line to a "Description:" line.
Remove the "Version:" line as we don't care about driver version numbers
in the kernel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/dyna_pci10xx.c | 35 +++++++++++++--------------
1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index 1b6324c..6c1e442 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -14,24 +14,23 @@
*/
/*
- Driver: dyna_pci10xx
- Devices: Dynalog India PCI DAQ Cards, http://www.dynalogindia.com/
- Author: Prashant Shah <pshah.mumbai@gmail.com>
- Developed at Automation Labs, Chemical Dept., IIT Bombay, India.
- Prof. Kannan Moudgalya <kannan@iitb.ac.in>
- http://www.iitb.ac.in
- Status: Stable
- Version: 1.0
- Device Supported :
- - Dynalog PCI 1050
-
- Notes :
- - Dynalog India Pvt. Ltd. does not have a registered PCI Vendor ID and
- they are using the PLX Technlogies Vendor ID since that is the PCI Chip used
- in the card.
- - Dynalog India Pvt. Ltd. has provided the internal register specification for
- their cards in their manuals.
-*/
+ * Driver: dyna_pci10xx
+ * Description: Dynalog India PCI DAQ Cards, http://www.dynalogindia.com/
+ * Devices: [Dynalog] PCI-1050 (dyna_pci1050)
+ * Author: Prashant Shah <pshah.mumbai@gmail.com>
+ * Status: Stable
+ *
+ * Developed at Automation Labs, Chemical Dept., IIT Bombay, India.
+ * Prof. Kannan Moudgalya <kannan@iitb.ac.in>
+ * http://www.iitb.ac.in
+ *
+ * Notes :
+ * - Dynalog India Pvt. Ltd. does not have a registered PCI Vendor ID and
+ * they are using the PLX Technlogies Vendor ID since that is the PCI Chip
+ * used in the card.
+ * - Dynalog India Pvt. Ltd. has provided the internal register specification
+ * for their cards in their manuals.
+ */
#include <linux/module.h>
#include <linux/delay.h>
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 19/45] staging: comedi: ii_pci20kc: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ii_pci20kc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 1085d66..0768bc42 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -9,7 +9,7 @@
/*
* Driver: ii_pci20kc
* Description: Intelligent Instruments PCI-20001C carrier board
- * Devices: (Intelligent Instrumentation) PCI-20001C [ii_pci20kc]
+ * Devices: [Intelligent Instrumentation] PCI-20001C (ii_pci20kc)
* Author: Markus Kempf <kempf@matsci.uni-sb.de>
* Status: works
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 19/45] staging: comedi: ii_pci20kc: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ii_pci20kc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 1085d66..0768bc42 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -9,7 +9,7 @@
/*
* Driver: ii_pci20kc
* Description: Intelligent Instruments PCI-20001C carrier board
- * Devices: (Intelligent Instrumentation) PCI-20001C [ii_pci20kc]
+ * Devices: [Intelligent Instrumentation] PCI-20001C (ii_pci20kc)
* Author: Markus Kempf <kempf@matsci.uni-sb.de>
* Status: works
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 20/45] staging: comedi: ke_counter: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ke_counter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 77e94a3..3c19e0f 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -19,7 +19,7 @@
/*
* Driver: ke_counter
* Description: Driver for Kolter Electronic Counter Card
- * Devices: (Kolter Electronic) PCI Counter Card [ke_counter]
+ * Devices: [Kolter Electronic] PCI Counter Card (ke_counter)
* Author: Michael Hillmann
* Updated: Mon, 14 Apr 2008 15:42:42 +0100
* Status: tested
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 20/45] staging: comedi: ke_counter: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ke_counter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 77e94a3..3c19e0f 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -19,7 +19,7 @@
/*
* Driver: ke_counter
* Description: Driver for Kolter Electronic Counter Card
- * Devices: (Kolter Electronic) PCI Counter Card [ke_counter]
+ * Devices: [Kolter Electronic] PCI Counter Card (ke_counter)
* Author: Michael Hillmann
* Updated: Mon, 14 Apr 2008 15:42:42 +0100
* Status: tested
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 21/45] staging: comedi: me_daq: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/me_daq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index b5278c1..bffc161 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -19,8 +19,7 @@
/*
* Driver: me_daq
* Description: Meilhaus PCI data acquisition cards
- * Devices: (Meilhaus) ME-2600i [me-2600i]
- * (Meilhaus) ME-2000i [me-2000i]
+ * Devices: [Meilhaus] ME-2600i (me-2600i), ME-2000i (me-2000i)
* Author: Michael Hillmann <hillmann@syscongroup.de>
* Status: experimental
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 21/45] staging: comedi: me_daq: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/me_daq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index b5278c1..bffc161 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -19,8 +19,7 @@
/*
* Driver: me_daq
* Description: Meilhaus PCI data acquisition cards
- * Devices: (Meilhaus) ME-2600i [me-2600i]
- * (Meilhaus) ME-2000i [me-2000i]
+ * Devices: [Meilhaus] ME-2600i (me-2600i), ME-2000i (me-2000i)
* Author: Michael Hillmann <hillmann@syscongroup.de>
* Status: experimental
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 22/45] staging: comedi: mf6x4: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/mf6x4.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/mf6x4.c b/drivers/staging/comedi/drivers/mf6x4.c
index af21bc1..db972bc 100644
--- a/drivers/staging/comedi/drivers/mf6x4.c
+++ b/drivers/staging/comedi/drivers/mf6x4.c
@@ -18,7 +18,7 @@
/*
* Driver: mf6x4
* Description: Humusoft MF634 and MF624 Data acquisition card driver
- * Devices: Humusoft MF634, Humusoft MF624
+ * Devices: [Humusoft] MF634 (mf634), MF624 (mf624)
* Author: Rostislav Lisovy <lisovy@gmail.com>
* Status: works
* Updated:
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 22/45] staging: comedi: mf6x4: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/mf6x4.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/mf6x4.c b/drivers/staging/comedi/drivers/mf6x4.c
index af21bc1..db972bc 100644
--- a/drivers/staging/comedi/drivers/mf6x4.c
+++ b/drivers/staging/comedi/drivers/mf6x4.c
@@ -18,7 +18,7 @@
/*
* Driver: mf6x4
* Description: Humusoft MF634 and MF624 Data acquisition card driver
- * Devices: Humusoft MF634, Humusoft MF624
+ * Devices: [Humusoft] MF634 (mf634), MF624 (mf624)
* Author: Rostislav Lisovy <lisovy@gmail.com>
* Status: works
* Updated:
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 23/45] staging: comedi: ni_6527: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_6527.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index f99847f..530f716 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -19,8 +19,7 @@
/*
* Driver: ni_6527
* Description: National Instruments 6527
- * Devices: (National Instruments) PCI-6527 [pci-6527]
- * (National Instruments) PXI-6527 [pxi-6527]
+ * Devices: [National Instruments] PCI-6527 (pci-6527), PXI-6527 (pxi-6527)
* Author: David A. Schleef <ds@schleef.org>
* Updated: Sat, 25 Jan 2003 13:24:40 -0800
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 23/45] staging: comedi: ni_6527: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_6527.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index f99847f..530f716 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -19,8 +19,7 @@
/*
* Driver: ni_6527
* Description: National Instruments 6527
- * Devices: (National Instruments) PCI-6527 [pci-6527]
- * (National Instruments) PXI-6527 [pxi-6527]
+ * Devices: [National Instruments] PCI-6527 (pci-6527), PXI-6527 (pxi-6527)
* Author: David A. Schleef <ds@schleef.org>
* Updated: Sat, 25 Jan 2003 13:24:40 -0800
* Status: works
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 24/45] staging: comedi: ni_65xx: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_65xx.c | 26 ++++----------------------
1 file changed, 4 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index bcb326e..9e8462b 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -25,28 +25,10 @@
* Author: Jon Grierson <jd@renko.co.uk>,
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: testing
- * Devices: (National Instruments) PCI-6509 [ni_65xx]
- * (National Instruments) PXI-6509 [ni_65xx]
- * (National Instruments) PCI-6510 [ni_65xx]
- * (National Instruments) PCI-6511 [ni_65xx]
- * (National Instruments) PXI-6511 [ni_65xx]
- * (National Instruments) PCI-6512 [ni_65xx]
- * (National Instruments) PXI-6512 [ni_65xx]
- * (National Instruments) PCI-6513 [ni_65xx]
- * (National Instruments) PXI-6513 [ni_65xx]
- * (National Instruments) PCI-6514 [ni_65xx]
- * (National Instruments) PXI-6514 [ni_65xx]
- * (National Instruments) PCI-6515 [ni_65xx]
- * (National Instruments) PXI-6515 [ni_65xx]
- * (National Instruments) PCI-6516 [ni_65xx]
- * (National Instruments) PCI-6517 [ni_65xx]
- * (National Instruments) PCI-6518 [ni_65xx]
- * (National Instruments) PCI-6519 [ni_65xx]
- * (National Instruments) PCI-6520 [ni_65xx]
- * (National Instruments) PCI-6521 [ni_65xx]
- * (National Instruments) PXI-6521 [ni_65xx]
- * (National Instruments) PCI-6528 [ni_65xx]
- * (National Instruments) PXI-6528 [ni_65xx]
+ * Devices: [National Instruments] PCI-6509 (ni_65xx), PXI-6509, PCI-6510,
+ * PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, PXI-6513, PCI-6514,
+ * PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, PCI-6518, PCI-6519,
+ * PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
* Updated: Mon, 21 Jul 2014 12:49:58 +0000
*
* Configuration Options: not applicable, uses PCI auto config
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 24/45] staging: comedi: ni_65xx: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_65xx.c | 26 ++++----------------------
1 file changed, 4 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index bcb326e..9e8462b 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -25,28 +25,10 @@
* Author: Jon Grierson <jd@renko.co.uk>,
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: testing
- * Devices: (National Instruments) PCI-6509 [ni_65xx]
- * (National Instruments) PXI-6509 [ni_65xx]
- * (National Instruments) PCI-6510 [ni_65xx]
- * (National Instruments) PCI-6511 [ni_65xx]
- * (National Instruments) PXI-6511 [ni_65xx]
- * (National Instruments) PCI-6512 [ni_65xx]
- * (National Instruments) PXI-6512 [ni_65xx]
- * (National Instruments) PCI-6513 [ni_65xx]
- * (National Instruments) PXI-6513 [ni_65xx]
- * (National Instruments) PCI-6514 [ni_65xx]
- * (National Instruments) PXI-6514 [ni_65xx]
- * (National Instruments) PCI-6515 [ni_65xx]
- * (National Instruments) PXI-6515 [ni_65xx]
- * (National Instruments) PCI-6516 [ni_65xx]
- * (National Instruments) PCI-6517 [ni_65xx]
- * (National Instruments) PCI-6518 [ni_65xx]
- * (National Instruments) PCI-6519 [ni_65xx]
- * (National Instruments) PCI-6520 [ni_65xx]
- * (National Instruments) PCI-6521 [ni_65xx]
- * (National Instruments) PXI-6521 [ni_65xx]
- * (National Instruments) PCI-6528 [ni_65xx]
- * (National Instruments) PXI-6528 [ni_65xx]
+ * Devices: [National Instruments] PCI-6509 (ni_65xx), PXI-6509, PCI-6510,
+ * PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, PXI-6513, PCI-6514,
+ * PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, PCI-6518, PCI-6519,
+ * PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
* Updated: Mon, 21 Jul 2014 12:49:58 +0000
*
* Configuration Options: not applicable, uses PCI auto config
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 25/45] staging: comedi: ni_65xx: use board names on "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
All the supported devices listed on the "Devices:" line currently use
the comedi driver name as the comedi board name. Historically, this
documented the name that should be passed to the "comedi_config" program
to "attach" the device via the COMEDI_DEVCONFIG ioctl. Some drivers
expected the driver name and others expected the board name. Since this
driver no longer supports the legacy "attach" mechanism, change the
"Devices:" list to show the board names, as that is probably more
useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_65xx.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 9e8462b..67cb758 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -25,10 +25,14 @@
* Author: Jon Grierson <jd@renko.co.uk>,
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: testing
- * Devices: [National Instruments] PCI-6509 (ni_65xx), PXI-6509, PCI-6510,
- * PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, PXI-6513, PCI-6514,
- * PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, PCI-6518, PCI-6519,
- * PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
+ * Devices: [National Instruments] PCI-6509 (pci-6509), PXI-6509 (pxi-6509),
+ * PCI-6510 (pci-6510), PCI-6511 (pci-6511), PXI-6511 (pxi-6511),
+ * PCI-6512 (pci-6512), PXI-6512 (pxi-6512), PCI-6513 (pci-6513),
+ * PXI-6513 (pxi-6513), PCI-6514 (pci-6514), PXI-6514 (pxi-6514),
+ * PCI-6515 (pxi-6515), PXI-6515 (pxi-6515), PCI-6516 (pci-6516),
+ * PCI-6517 (pci-6517), PCI-6518 (pci-6518), PCI-6519 (pci-6519),
+ * PCI-6520 (pci-6520), PCI-6521 (pci-6521), PXI-6521 (pxi-6521),
+ * PCI-6528 (pci-6528), PXI-6528 (pxi-6528)
* Updated: Mon, 21 Jul 2014 12:49:58 +0000
*
* Configuration Options: not applicable, uses PCI auto config
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 25/45] staging: comedi: ni_65xx: use board names on "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
All the supported devices listed on the "Devices:" line currently use
the comedi driver name as the comedi board name. Historically, this
documented the name that should be passed to the "comedi_config" program
to "attach" the device via the COMEDI_DEVCONFIG ioctl. Some drivers
expected the driver name and others expected the board name. Since this
driver no longer supports the legacy "attach" mechanism, change the
"Devices:" list to show the board names, as that is probably more
useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_65xx.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 9e8462b..67cb758 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -25,10 +25,14 @@
* Author: Jon Grierson <jd@renko.co.uk>,
* Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: testing
- * Devices: [National Instruments] PCI-6509 (ni_65xx), PXI-6509, PCI-6510,
- * PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, PXI-6513, PCI-6514,
- * PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, PCI-6518, PCI-6519,
- * PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
+ * Devices: [National Instruments] PCI-6509 (pci-6509), PXI-6509 (pxi-6509),
+ * PCI-6510 (pci-6510), PCI-6511 (pci-6511), PXI-6511 (pxi-6511),
+ * PCI-6512 (pci-6512), PXI-6512 (pxi-6512), PCI-6513 (pci-6513),
+ * PXI-6513 (pxi-6513), PCI-6514 (pci-6514), PXI-6514 (pxi-6514),
+ * PCI-6515 (pxi-6515), PXI-6515 (pxi-6515), PCI-6516 (pci-6516),
+ * PCI-6517 (pci-6517), PCI-6518 (pci-6518), PCI-6519 (pci-6519),
+ * PCI-6520 (pci-6520), PCI-6521 (pci-6521), PXI-6521 (pxi-6521),
+ * PCI-6528 (pci-6528), PXI-6528 (pxi-6528)
* Updated: Mon, 21 Jul 2014 12:49:58 +0000
*
* Configuration Options: not applicable, uses PCI auto config
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 26/45] staging: comedi: ni_at_ao: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_at_ao.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 05370a4..9eeaf3c 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -19,8 +19,7 @@
/*
* Driver: ni_at_ao
* Description: National Instruments AT-AO-6/10
- * Devices: (National Instruments) AT-AO-6 [at-ao-6]
- * (National Instruments) AT-AO-10 [at-ao-10]
+ * Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10)
* Status: should work
* Author: David A. Schleef <ds@schleef.org>
* Updated: Sun Dec 26 12:26:28 EST 2004
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 26/45] staging: comedi: ni_at_ao: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_at_ao.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 05370a4..9eeaf3c 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -19,8 +19,7 @@
/*
* Driver: ni_at_ao
* Description: National Instruments AT-AO-6/10
- * Devices: (National Instruments) AT-AO-6 [at-ao-6]
- * (National Instruments) AT-AO-10 [at-ao-10]
+ * Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10)
* Status: should work
* Author: David A. Schleef <ds@schleef.org>
* Updated: Sun Dec 26 12:26:28 EST 2004
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 27/45] staging: comedi: ni_labpc: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_labpc.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 1fbfdb4..59da404 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -17,9 +17,8 @@
/*
* Driver: ni_labpc
* Description: National Instruments Lab-PC (& compatibles)
- * Devices: (National Instruments) Lab-PC-1200 [lab-pc-1200]
- * (National Instruments) Lab-PC-1200AI [lab-pc-1200ai]
- * (National Instruments) Lab-PC+ [lab-pc+]
+ * Devices: [National Instruments] Lab-PC-1200 (lab-pc-1200),
+ * Lab-PC-1200AI (lab-pc-1200ai), Lab-PC+ (lab-pc+)
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 27/45] staging: comedi: ni_labpc: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_labpc.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 1fbfdb4..59da404 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -17,9 +17,8 @@
/*
* Driver: ni_labpc
* Description: National Instruments Lab-PC (& compatibles)
- * Devices: (National Instruments) Lab-PC-1200 [lab-pc-1200]
- * (National Instruments) Lab-PC-1200AI [lab-pc-1200ai]
- * (National Instruments) Lab-PC+ [lab-pc+]
+ * Devices: [National Instruments] Lab-PC-1200 (lab-pc-1200),
+ * Lab-PC-1200AI (lab-pc-1200ai), Lab-PC+ (lab-pc+)
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 28/45] staging: comedi: ni_labpc_pci: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_labpc_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc_pci.c b/drivers/staging/comedi/drivers/ni_labpc_pci.c
index 3fc4204..a9f408a 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_pci.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_pci.c
@@ -17,7 +17,7 @@
/*
* Driver: ni_labpc_pci
* Description: National Instruments Lab-PC PCI-1200
- * Devices: (National Instruments) PCI-1200 [ni_pci-1200]
+ * Devices: [National Instruments] PCI-1200 (ni_pci-1200)
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 28/45] staging: comedi: ni_labpc_pci: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_labpc_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc_pci.c b/drivers/staging/comedi/drivers/ni_labpc_pci.c
index 3fc4204..a9f408a 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_pci.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_pci.c
@@ -17,7 +17,7 @@
/*
* Driver: ni_labpc_pci
* Description: National Instruments Lab-PC PCI-1200
- * Devices: (National Instruments) PCI-1200 [ni_pci-1200]
+ * Devices: [National Instruments] PCI-1200 (ni_pci-1200)
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 29/45] staging: comedi: ni_tio: change comedi "driver" comment to "module"
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_tio.c | 43 ++++++++++++++++-----------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index 0525292..c20c51b 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -16,29 +16,28 @@
*/
/*
-Driver: ni_tio
-Description: National Instruments general purpose counters
-Devices:
-Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
- Herman.Bruyninckx@mech.kuleuven.ac.be,
- Wim.Meeussen@mech.kuleuven.ac.be,
- Klaas.Gadeyne@mech.kuleuven.ac.be,
- Frank Mori Hess <fmhess@users.sourceforge.net>
-Updated: Thu Nov 16 09:50:32 EST 2006
-Status: works
-
-This module is not used directly by end-users. Rather, it
-is used by other drivers (for example ni_660x and ni_pcimio)
-to provide support for NI's general purpose counters. It was
-originally based on the counter code from ni_660x.c and
-ni_mio_common.c.
-
-References:
-DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
-DAQ 6601/6602 User Manual (NI 322137B-01)
-340934b.pdf DAQ-STC reference manual
+ * Module: ni_tio
+ * Description: National Instruments general purpose counters
+ * Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
+ * Herman.Bruyninckx@mech.kuleuven.ac.be,
+ * Wim.Meeussen@mech.kuleuven.ac.be,
+ * Klaas.Gadeyne@mech.kuleuven.ac.be,
+ * Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Updated: Thu Nov 16 09:50:32 EST 2006
+ * Status: works
+ *
+ * This module is not used directly by end-users. Rather, it
+ * is used by other drivers (for example ni_660x and ni_pcimio)
+ * to provide support for NI's general purpose counters. It was
+ * originally based on the counter code from ni_660x.c and
+ * ni_mio_common.c.
+ *
+ * References:
+ * DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
+ * DAQ 6601/6602 User Manual (NI 322137B-01)
+ * 340934b.pdf DAQ-STC reference manual
+ */
-*/
/*
TODO:
Support use of both banks X and Y
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 29/45] staging: comedi: ni_tio: change comedi "driver" comment to "module"
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_tio.c | 43 ++++++++++++++++-----------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index 0525292..c20c51b 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -16,29 +16,28 @@
*/
/*
-Driver: ni_tio
-Description: National Instruments general purpose counters
-Devices:
-Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
- Herman.Bruyninckx@mech.kuleuven.ac.be,
- Wim.Meeussen@mech.kuleuven.ac.be,
- Klaas.Gadeyne@mech.kuleuven.ac.be,
- Frank Mori Hess <fmhess@users.sourceforge.net>
-Updated: Thu Nov 16 09:50:32 EST 2006
-Status: works
-
-This module is not used directly by end-users. Rather, it
-is used by other drivers (for example ni_660x and ni_pcimio)
-to provide support for NI's general purpose counters. It was
-originally based on the counter code from ni_660x.c and
-ni_mio_common.c.
-
-References:
-DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
-DAQ 6601/6602 User Manual (NI 322137B-01)
-340934b.pdf DAQ-STC reference manual
+ * Module: ni_tio
+ * Description: National Instruments general purpose counters
+ * Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
+ * Herman.Bruyninckx@mech.kuleuven.ac.be,
+ * Wim.Meeussen@mech.kuleuven.ac.be,
+ * Klaas.Gadeyne@mech.kuleuven.ac.be,
+ * Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Updated: Thu Nov 16 09:50:32 EST 2006
+ * Status: works
+ *
+ * This module is not used directly by end-users. Rather, it
+ * is used by other drivers (for example ni_660x and ni_pcimio)
+ * to provide support for NI's general purpose counters. It was
+ * originally based on the counter code from ni_660x.c and
+ * ni_mio_common.c.
+ *
+ * References:
+ * DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
+ * DAQ 6601/6602 User Manual (NI 322137B-01)
+ * 340934b.pdf DAQ-STC reference manual
+ */
-*/
/*
TODO:
Support use of both banks X and Y
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 30/45] staging: comedi: ni_tiocmd: change comedi "driver" comment to "module"
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/ni_tiocmd.c | 43 +++++++++++++++---------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 6037bec..d36c3ab 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -16,29 +16,28 @@
*/
/*
-Driver: ni_tiocmd
-Description: National Instruments general purpose counters command support
-Devices:
-Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
- Herman.Bruyninckx@mech.kuleuven.ac.be,
- Wim.Meeussen@mech.kuleuven.ac.be,
- Klaas.Gadeyne@mech.kuleuven.ac.be,
- Frank Mori Hess <fmhess@users.sourceforge.net>
-Updated: Fri, 11 Apr 2008 12:32:35 +0100
-Status: works
-
-This module is not used directly by end-users. Rather, it
-is used by other drivers (for example ni_660x and ni_pcimio)
-to provide command support for NI's general purpose counters.
-It was originally split out of ni_tio.c to stop the 'ni_tio'
-module depending on the 'mite' module.
-
-References:
-DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
-DAQ 6601/6602 User Manual (NI 322137B-01)
-340934b.pdf DAQ-STC reference manual
+ * Module: ni_tiocmd
+ * Description: National Instruments general purpose counters command support
+ * Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
+ * Herman.Bruyninckx@mech.kuleuven.ac.be,
+ * Wim.Meeussen@mech.kuleuven.ac.be,
+ * Klaas.Gadeyne@mech.kuleuven.ac.be,
+ * Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Updated: Fri, 11 Apr 2008 12:32:35 +0100
+ * Status: works
+ *
+ * This module is not used directly by end-users. Rather, it
+ * is used by other drivers (for example ni_660x and ni_pcimio)
+ * to provide command support for NI's general purpose counters.
+ * It was originally split out of ni_tio.c to stop the 'ni_tio'
+ * module depending on the 'mite' module.
+ *
+ * References:
+ * DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
+ * DAQ 6601/6602 User Manual (NI 322137B-01)
+ * 340934b.pdf DAQ-STC reference manual
+ */
-*/
/*
TODO:
Support use of both banks X and Y
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 30/45] staging: comedi: ni_tiocmd: change comedi "driver" comment to "module"
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/ni_tiocmd.c | 43 +++++++++++++++---------------
1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 6037bec..d36c3ab 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -16,29 +16,28 @@
*/
/*
-Driver: ni_tiocmd
-Description: National Instruments general purpose counters command support
-Devices:
-Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
- Herman.Bruyninckx@mech.kuleuven.ac.be,
- Wim.Meeussen@mech.kuleuven.ac.be,
- Klaas.Gadeyne@mech.kuleuven.ac.be,
- Frank Mori Hess <fmhess@users.sourceforge.net>
-Updated: Fri, 11 Apr 2008 12:32:35 +0100
-Status: works
-
-This module is not used directly by end-users. Rather, it
-is used by other drivers (for example ni_660x and ni_pcimio)
-to provide command support for NI's general purpose counters.
-It was originally split out of ni_tio.c to stop the 'ni_tio'
-module depending on the 'mite' module.
-
-References:
-DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
-DAQ 6601/6602 User Manual (NI 322137B-01)
-340934b.pdf DAQ-STC reference manual
+ * Module: ni_tiocmd
+ * Description: National Instruments general purpose counters command support
+ * Author: J.P. Mellor <jpmellor@rose-hulman.edu>,
+ * Herman.Bruyninckx@mech.kuleuven.ac.be,
+ * Wim.Meeussen@mech.kuleuven.ac.be,
+ * Klaas.Gadeyne@mech.kuleuven.ac.be,
+ * Frank Mori Hess <fmhess@users.sourceforge.net>
+ * Updated: Fri, 11 Apr 2008 12:32:35 +0100
+ * Status: works
+ *
+ * This module is not used directly by end-users. Rather, it
+ * is used by other drivers (for example ni_660x and ni_pcimio)
+ * to provide command support for NI's general purpose counters.
+ * It was originally split out of ni_tio.c to stop the 'ni_tio'
+ * module depending on the 'mite' module.
+ *
+ * References:
+ * DAQ 660x Register-Level Programmer Manual (NI 370505A-01)
+ * DAQ 6601/6602 User Manual (NI 322137B-01)
+ * 340934b.pdf DAQ-STC reference manual
+ */
-*/
/*
TODO:
Support use of both banks X and Y
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 31/45] staging: comedi: pcl711: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:54 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl711.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index 938aebc..cb7e4c3 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -22,10 +22,8 @@
/*
* Driver: pcl711
* Description: Advantech PCL-711 and 711b, ADLink ACL-8112
- * Devices: (Advantech) PCL-711 [pcl711]
- * (Advantech) PCL-711B [pcl711b]
- * (AdLink) ACL-8112HG [acl8112hg]
- * (AdLink) ACL-8112DG [acl8112dg]
+ * Devices: [Advantech] PCL-711 (pcl711), PCL-711B (pcl711b),
+ * [ADLink] ACL-8112HG (acl8112hg), ACL-8112DG (acl8112dg)
* Author: David A. Schleef <ds@schleef.org>
* Janne Jalkanen <jalkanen@cs.hut.fi>
* Eric Bunn <ebu@cs.hut.fi>
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 31/45] staging: comedi: pcl711: rewrite "Devices:" line
@ 2015-01-05 17:54 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:54 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcl711.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index 938aebc..cb7e4c3 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -22,10 +22,8 @@
/*
* Driver: pcl711
* Description: Advantech PCL-711 and 711b, ADLink ACL-8112
- * Devices: (Advantech) PCL-711 [pcl711]
- * (Advantech) PCL-711B [pcl711b]
- * (AdLink) ACL-8112HG [acl8112hg]
- * (AdLink) ACL-8112DG [acl8112dg]
+ * Devices: [Advantech] PCL-711 (pcl711), PCL-711B (pcl711b),
+ * [ADLink] ACL-8112HG (acl8112hg), ACL-8112DG (acl8112dg)
* Author: David A. Schleef <ds@schleef.org>
* Janne Jalkanen <jalkanen@cs.hut.fi>
* Eric Bunn <ebu@cs.hut.fi>
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 32/45] staging: comedi: pcl724: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl724.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index fcc4408..74b07e1 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -8,14 +8,10 @@
/*
* Driver: pcl724
* Description: Comedi driver for 8255 based ISA DIO boards
- * Devices: (Advantech) PCL-724 [pcl724]
- * (Advantech) PCL-722 [pcl722]
- * (Advantech) PCL-731 [pcl731]
- * (ADLink) ACL-7122 [acl7122]
- * (ADLink) ACL-7124 [acl7124]
- * (ADLink) PET-48DIO [pet48dio]
- * (WinSystems) PCM-IO48 [pcmio48]
- * (Diamond Systems) ONYX-MM-DIO [onyx-mm-dio]
+ * Devices: [Advantech] PCL-724 (pcl724), PCL-722 (pcl722), PCL-731 (pcl731),
+ * [ADLink] ACL-7122 (acl7122), ACL-7124 (acl7124), PET-48DIO (pet48dio),
+ * [WinSystems] PCM-IO48 (pcmio48),
+ * [Diamond Systems] ONYX-MM-DIO (onyx-mm-dio)
* Author: Michal Dobes <dobes@tesnet.cz>
* Status: untested
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 32/45] staging: comedi: pcl724: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcl724.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index fcc4408..74b07e1 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -8,14 +8,10 @@
/*
* Driver: pcl724
* Description: Comedi driver for 8255 based ISA DIO boards
- * Devices: (Advantech) PCL-724 [pcl724]
- * (Advantech) PCL-722 [pcl722]
- * (Advantech) PCL-731 [pcl731]
- * (ADLink) ACL-7122 [acl7122]
- * (ADLink) ACL-7124 [acl7124]
- * (ADLink) PET-48DIO [pet48dio]
- * (WinSystems) PCM-IO48 [pcmio48]
- * (Diamond Systems) ONYX-MM-DIO [onyx-mm-dio]
+ * Devices: [Advantech] PCL-724 (pcl724), PCL-722 (pcl722), PCL-731 (pcl731),
+ * [ADLink] ACL-7122 (acl7122), ACL-7124 (acl7124), PET-48DIO (pet48dio),
+ * [WinSystems] PCM-IO48 (pcmio48),
+ * [Diamond Systems] ONYX-MM-DIO (onyx-mm-dio)
* Author: Michal Dobes <dobes@tesnet.cz>
* Status: untested
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 33/45] staging: comedi: pcl726: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl726.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 86f713f..4079815 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -21,11 +21,8 @@
* Description: Advantech PCL-726 & compatibles
* Author: David A. Schleef <ds@schleef.org>
* Status: untested
- * Devices: (Advantech) PCL-726 [pcl726]
- * (Advantech) PCL-727 [pcl727]
- * (Advantech) PCL-728 [pcl728]
- * (ADLink) ACL-6126 [acl6126]
- * (ADLink) ACL-6128 [acl6128]
+ * Devices: [Advantech] PCL-726 (pcl726), PCL-727 (pcl727), PCL-728 (pcl728),
+ * [ADLink] ACL-6126 (acl6126), ACL-6128 (acl6128)
*
* Configuration Options:
* [0] - IO Base
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 33/45] staging: comedi: pcl726: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcl726.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 86f713f..4079815 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -21,11 +21,8 @@
* Description: Advantech PCL-726 & compatibles
* Author: David A. Schleef <ds@schleef.org>
* Status: untested
- * Devices: (Advantech) PCL-726 [pcl726]
- * (Advantech) PCL-727 [pcl727]
- * (Advantech) PCL-728 [pcl728]
- * (ADLink) ACL-6126 [acl6126]
- * (ADLink) ACL-6128 [acl6128]
+ * Devices: [Advantech] PCL-726 (pcl726), PCL-727 (pcl727), PCL-728 (pcl728),
+ * [ADLink] ACL-6126 (acl6126), ACL-6128 (acl6128)
*
* Configuration Options:
* [0] - IO Base
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 34/45] staging: comedi: pcl730: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Group boards from the same manufacturer together on the "Devices:" line
to avoid repeating the "[Manufacturer]" tag unnecessarily.
Also fix a couple of typos in the board names on the "Devices:" line:
"p16r16dio" was used twice, but one of them should be "p8r8dio";
"prearl-mm-p" should be "pearl-mm-p".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl730.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index a6c5770..ce958ee 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -7,19 +7,12 @@
/*
* Driver: pcl730
* Description: Advantech PCL-730 (& compatibles)
- * Devices: (Advantech) PCL-730 [pcl730]
- * (ICP) ISO-730 [iso730]
- * (Adlink) ACL-7130 [acl7130]
- * (Advantech) PCM-3730 [pcm3730]
- * (Advantech) PCL-725 [pcl725]
- * (ICP) P8R8-DIO [p16r16dio]
- * (Adlink) ACL-7225b [acl7225b]
- * (ICP) P16R16-DIO [p16r16dio]
- * (Advantech) PCL-733 [pcl733]
- * (Advantech) PCL-734 [pcl734]
- * (Diamond Systems) OPMM-1616-XT [opmm-1616-xt]
- * (Diamond Systems) PEARL-MM-P [prearl-mm-p]
- * (Diamond Systems) IR104-PBF [ir104-pbf]
+ * Devices: [Advantech] PCL-730 (pcl730), PCM-3730 (pcm3730), PCL-725 (pcl725),
+ * PCL-733 (pcl733), PCL-734 (pcl734),
+ * [ADLink] ACL-7130 (acl7130), ACL-7225b (acl7225b),
+ * [ICP] ISO-730 (iso730), P8R8-DIO (p8r8dio), P16R16-DIO (p16r16dio),
+ * [Diamond Systems] OPMM-1616-XT (opmm-1616-xt), PEARL-MM-P (pearl-mm-p),
+ * IR104-PBF (ir104-pbf),
* Author: José Luis Sánchez (jsanchezv@teleline.es)
* Status: untested
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 34/45] staging: comedi: pcl730: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Group boards from the same manufacturer together on the "Devices:" line
to avoid repeating the "[Manufacturer]" tag unnecessarily.
Also fix a couple of typos in the board names on the "Devices:" line:
"p16r16dio" was used twice, but one of them should be "p8r8dio";
"prearl-mm-p" should be "pearl-mm-p".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcl730.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index a6c5770..ce958ee 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -7,19 +7,12 @@
/*
* Driver: pcl730
* Description: Advantech PCL-730 (& compatibles)
- * Devices: (Advantech) PCL-730 [pcl730]
- * (ICP) ISO-730 [iso730]
- * (Adlink) ACL-7130 [acl7130]
- * (Advantech) PCM-3730 [pcm3730]
- * (Advantech) PCL-725 [pcl725]
- * (ICP) P8R8-DIO [p16r16dio]
- * (Adlink) ACL-7225b [acl7225b]
- * (ICP) P16R16-DIO [p16r16dio]
- * (Advantech) PCL-733 [pcl733]
- * (Advantech) PCL-734 [pcl734]
- * (Diamond Systems) OPMM-1616-XT [opmm-1616-xt]
- * (Diamond Systems) PEARL-MM-P [prearl-mm-p]
- * (Diamond Systems) IR104-PBF [ir104-pbf]
+ * Devices: [Advantech] PCL-730 (pcl730), PCM-3730 (pcm3730), PCL-725 (pcl725),
+ * PCL-733 (pcl733), PCL-734 (pcl734),
+ * [ADLink] ACL-7130 (acl7130), ACL-7225b (acl7225b),
+ * [ICP] ISO-730 (iso730), P8R8-DIO (p8r8dio), P16R16-DIO (p16r16dio),
+ * [Diamond Systems] OPMM-1616-XT (opmm-1616-xt), PEARL-MM-P (pearl-mm-p),
+ * IR104-PBF (ir104-pbf),
* Author: José Luis Sánchez (jsanchezv@teleline.es)
* Status: untested
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 35/45] staging: comedi: pcmad: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcmad.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index e3ac8ac..12f94fe 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -19,8 +19,7 @@
/*
* Driver: pcmad
* Description: Winsystems PCM-A/D12, PCM-A/D16
- * Devices: (Winsystems) PCM-A/D12 [pcmad12]
- * (Winsystems) PCM-A/D16 [pcmad16]
+ * Devices: [Winsystems] PCM-A/D12 (pcmad12), PCM-A/D16 (pcmad16)
* Author: ds
* Status: untested
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 35/45] staging: comedi: pcmad: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcmad.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index e3ac8ac..12f94fe 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -19,8 +19,7 @@
/*
* Driver: pcmad
* Description: Winsystems PCM-A/D12, PCM-A/D16
- * Devices: (Winsystems) PCM-A/D12 [pcmad12]
- * (Winsystems) PCM-A/D16 [pcmad16]
+ * Devices: [Winsystems] PCM-A/D12 (pcmad12), PCM-A/D16 (pcmad16)
* Author: ds
* Status: untested
*
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 36/45] staging: comedi: pcmda12: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcmda12.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 59108c0..d86c5e2 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -19,7 +19,7 @@
/*
* Driver: pcmda12
* Description: A driver for the Winsystems PCM-D/A-12
- * Devices: (Winsystems) PCM-D/A-12 [pcmda12]
+ * Devices: [Winsystems] PCM-D/A-12 (pcmda12)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Fri, 13 Jan 2006 12:01:01 -0500
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 36/45] staging: comedi: pcmda12: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcmda12.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 59108c0..d86c5e2 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -19,7 +19,7 @@
/*
* Driver: pcmda12
* Description: A driver for the Winsystems PCM-D/A-12
- * Devices: (Winsystems) PCM-D/A-12 [pcmda12]
+ * Devices: [Winsystems] PCM-D/A-12 (pcmda12)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Fri, 13 Jan 2006 12:01:01 -0500
* Status: works
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 37/45] staging: comedi: pcmmio: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcmmio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index f0059e9..2c0e7ec 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -19,7 +19,7 @@
/*
* Driver: pcmmio
* Description: A driver for the PCM-MIO multifunction board
- * Devices: (Winsystems) PCM-MIO [pcmmio]
+ * Devices: [Winsystems] PCM-MIO (pcmmio)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Wed, May 16 2007 16:21:10 -0500
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 37/45] staging: comedi: pcmmio: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcmmio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index f0059e9..2c0e7ec 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -19,7 +19,7 @@
/*
* Driver: pcmmio
* Description: A driver for the PCM-MIO multifunction board
- * Devices: (Winsystems) PCM-MIO [pcmmio]
+ * Devices: [Winsystems] PCM-MIO (pcmmio)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Wed, May 16 2007 16:21:10 -0500
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 38/45] staging: comedi: pcmuio: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/pcmuio.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 0f5483b..a1641d9 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -19,8 +19,7 @@
/*
* Driver: pcmuio
* Description: Winsystems PC-104 based 48/96-channel DIO boards.
- * Devices: (Winsystems) PCM-UIO48A [pcmuio48]
- * (Winsystems) PCM-UIO96A [pcmuio96]
+ * Devices: [Winsystems] PCM-UIO48A (pcmuio48), PCM-UIO96A (pcmuio96)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Fri, 13 Jan 2006 12:01:01 -0500
* Status: works
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 38/45] staging: comedi: pcmuio: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/pcmuio.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 0f5483b..a1641d9 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -19,8 +19,7 @@
/*
* Driver: pcmuio
* Description: Winsystems PC-104 based 48/96-channel DIO boards.
- * Devices: (Winsystems) PCM-UIO48A [pcmuio48]
- * (Winsystems) PCM-UIO96A [pcmuio96]
+ * Devices: [Winsystems] PCM-UIO48A (pcmuio48), PCM-UIO96A (pcmuio96)
* Author: Calin Culianu <calin@ajvar.org>
* Updated: Fri, 13 Jan 2006 12:01:01 -0500
* Status: works
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 39/45] staging: comedi: rtd520: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/rtd520.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 581aa58..06ae436 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -19,10 +19,8 @@
/*
* Driver: rtd520
* Description: Real Time Devices PCI4520/DM7520
- * Devices: (Real Time Devices) DM7520HR-1 [DM7520]
- * (Real Time Devices) DM7520HR-8 [DM7520]
- * (Real Time Devices) PCI4520 [PCI4520]
- * (Real Time Devices) PCI4520-8 [PCI4520]
+ * Devices: [Real Time Devices] DM7520HR-1 (DM7520), DM7520HR-8,
+ * PCI4520 (PCI4520), PCI4520-8
* Author: Dan Christian
* Status: Works. Only tested on DM7520-8. Not SMP safe.
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 39/45] staging: comedi: rtd520: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/rtd520.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 581aa58..06ae436 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -19,10 +19,8 @@
/*
* Driver: rtd520
* Description: Real Time Devices PCI4520/DM7520
- * Devices: (Real Time Devices) DM7520HR-1 [DM7520]
- * (Real Time Devices) DM7520HR-8 [DM7520]
- * (Real Time Devices) PCI4520 [PCI4520]
- * (Real Time Devices) PCI4520-8 [PCI4520]
+ * Devices: [Real Time Devices] DM7520HR-1 (DM7520), DM7520HR-8,
+ * PCI4520 (PCI4520), PCI4520-8
* Author: Dan Christian
* Status: Works. Only tested on DM7520-8. Not SMP safe.
*
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 40/45] staging: comedi: rti800: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/rti800.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 67b4b37..340ac77 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -19,8 +19,7 @@
/*
* Driver: rti800
* Description: Analog Devices RTI-800/815
- * Devices: (Analog Devices) RTI-800 [rti800]
- * (Analog Devices) RTI-815 [rti815]
+ * Devices: [Analog Devices] RTI-800 (rti800), RTI-815 (rti815)
* Author: David A. Schleef <ds@schleef.org>
* Status: unknown
* Updated: Fri, 05 Sep 2008 14:50:44 +0100
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 40/45] staging: comedi: rti800: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/rti800.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 67b4b37..340ac77 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -19,8 +19,7 @@
/*
* Driver: rti800
* Description: Analog Devices RTI-800/815
- * Devices: (Analog Devices) RTI-800 [rti800]
- * (Analog Devices) RTI-815 [rti815]
+ * Devices: [Analog Devices] RTI-800 (rti800), RTI-815 (rti815)
* Author: David A. Schleef <ds@schleef.org>
* Status: unknown
* Updated: Fri, 05 Sep 2008 14:50:44 +0100
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 41/45] staging: comedi: rti802: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/rti802.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index 96c3974..6db58fc 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -20,7 +20,7 @@
* Driver: rti802
* Description: Analog Devices RTI-802
* Author: Anders Blomdell <anders.blomdell@control.lth.se>
- * Devices: (Analog Devices) RTI-802 [rti802]
+ * Devices: [Analog Devices] RTI-802 (rti802)
* Status: works
*
* Configuration Options:
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 41/45] staging: comedi: rti802: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/rti802.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index 96c3974..6db58fc 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -20,7 +20,7 @@
* Driver: rti802
* Description: Analog Devices RTI-802
* Author: Anders Blomdell <anders.blomdell@control.lth.se>
- * Devices: (Analog Devices) RTI-802 [rti802]
+ * Devices: [Analog Devices] RTI-802 (rti802)
* Status: works
*
* Configuration Options:
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 42/45] staging: comedi: usbdux: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/usbdux.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 4737dbf..0683d6a 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -16,10 +16,11 @@
/*
* Driver: usbdux
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbdux]
+ * Devices: [ITL] USB-DUX (usbdux)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: Stable
+ *
* Connection scheme for the counter at the digital port:
* 0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1.
* The sampling rate of the counter is approximately 500Hz.
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 42/45] staging: comedi: usbdux: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/usbdux.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 4737dbf..0683d6a 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -16,10 +16,11 @@
/*
* Driver: usbdux
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbdux]
+ * Devices: [ITL] USB-DUX (usbdux)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: Stable
+ *
* Connection scheme for the counter at the digital port:
* 0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1.
* The sampling rate of the counter is approximately 500Hz.
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 43/45] staging: comedi: usbduxfast: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-FAST" to distinguish it from the other
USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/usbduxfast.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index ddc4cb9..85071da 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -15,7 +15,7 @@
/*
* Driver: usbduxfast
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbduxfast]
+ * Devices: [ITL] USB-DUX-FAST (usbduxfast)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: stable
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 43/45] staging: comedi: usbduxfast: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-FAST" to distinguish it from the other
USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/usbduxfast.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index ddc4cb9..85071da 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -15,7 +15,7 @@
/*
* Driver: usbduxfast
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbduxfast]
+ * Devices: [ITL] USB-DUX-FAST (usbduxfast)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: stable
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 44/45] staging: comedi: usbduxsigma: rewrite "Devices:" line
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-SIGMA" to distinguish it from the
other USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/usbduxsigma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index dc19435..17e5a81 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -16,7 +16,7 @@
/*
* Driver: usbduxsigma
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbduxsigma]
+ * Devices: [ITL] USB-DUX-SIGMA (usbduxsigma)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: stable
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 44/45] staging: comedi: usbduxsigma: rewrite "Devices:" line
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel; +Cc: Greg Kroah-Hartman, Ian Abbott, linux-kernel
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-SIGMA" to distinguish it from the
other USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/usbduxsigma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index dc19435..17e5a81 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -16,7 +16,7 @@
/*
* Driver: usbduxsigma
* Description: University of Stirling USB DAQ & INCITE Technology Limited
- * Devices: (ITL) USB-DUX [usbduxsigma]
+ * Devices: [ITL] USB-DUX-SIGMA (usbduxsigma)
* Author: Bernd Porr <mail@berndporr.me.uk>
* Updated: 10 Oct 2014
* Status: stable
--
2.1.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 94+ messages in thread
* [PATCH 45/45] staging: comedi: vm80xx: rewrite comedi driver comment block
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 17:55 ` Ian Abbott
-1 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Note that the comedi board names I've added to the "Devices:" line don't
quite match the board names reported by the driver itself, as they
contain parentheses and I don't want nested parentheses on the
"Devices:" line (mostly because it confuses a script I use to extract
supported devices from the driver comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/vmk80xx.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index a19a56e..5312e0f 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -18,21 +18,22 @@
GNU General Public License for more details.
*/
/*
-Driver: vmk80xx
-Description: Velleman USB Board Low-Level Driver
-Devices: K8055/K8061 aka VM110/VM140
-Author: Manuel Gebele <forensixs@gmx.de>
-Updated: Sun, 10 May 2009 11:14:59 +0200
-Status: works
-
-Supports:
- - analog input
- - analog output
- - digital input
- - digital output
- - counter
- - pwm
-*/
+ * Driver: vmk80xx
+ * Description: Velleman USB Board Low-Level Driver
+ * Devices: [Velleman] K8055 (K8055/VM110), K8061 (K8061/VM140),
+ * VM110 (K8055/VM110), VM140 (K8061/VM140)
+ * Author: Manuel Gebele <forensixs@gmx.de>
+ * Updated: Sun, 10 May 2009 11:14:59 +0200
+ * Status: works
+ *
+ * Supports:
+ * - analog input
+ * - analog output
+ * - digital input
+ * - digital output
+ * - counter
+ * - pwm
+ */
#include <linux/kernel.h>
#include <linux/module.h>
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread* [PATCH 45/45] staging: comedi: vm80xx: rewrite comedi driver comment block
@ 2015-01-05 17:55 ` Ian Abbott
0 siblings, 0 replies; 94+ messages in thread
From: Ian Abbott @ 2015-01-05 17:55 UTC (permalink / raw)
To: driverdev-devel
Cc: Greg Kroah-Hartman, Ian Abbott, H Hartley Sweeten, linux-kernel
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Note that the comedi board names I've added to the "Devices:" line don't
quite match the board names reported by the driver itself, as they
contain parentheses and I don't want nested parentheses on the
"Devices:" line (mostly because it confuses a script I use to extract
supported devices from the driver comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
drivers/staging/comedi/drivers/vmk80xx.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index a19a56e..5312e0f 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -18,21 +18,22 @@
GNU General Public License for more details.
*/
/*
-Driver: vmk80xx
-Description: Velleman USB Board Low-Level Driver
-Devices: K8055/K8061 aka VM110/VM140
-Author: Manuel Gebele <forensixs@gmx.de>
-Updated: Sun, 10 May 2009 11:14:59 +0200
-Status: works
-
-Supports:
- - analog input
- - analog output
- - digital input
- - digital output
- - counter
- - pwm
-*/
+ * Driver: vmk80xx
+ * Description: Velleman USB Board Low-Level Driver
+ * Devices: [Velleman] K8055 (K8055/VM110), K8061 (K8061/VM140),
+ * VM110 (K8055/VM110), VM140 (K8061/VM140)
+ * Author: Manuel Gebele <forensixs@gmx.de>
+ * Updated: Sun, 10 May 2009 11:14:59 +0200
+ * Status: works
+ *
+ * Supports:
+ * - analog input
+ * - analog output
+ * - digital input
+ * - digital output
+ * - counter
+ * - pwm
+ */
#include <linux/kernel.h>
#include <linux/module.h>
--
2.1.4
^ permalink raw reply related [flat|nested] 94+ messages in thread
* RE: [PATCH 00/45] staging: comedi: fix up some driver comments
2015-01-05 17:54 ` Ian Abbott
@ 2015-01-05 18:55 ` Hartley Sweeten
-1 siblings, 0 replies; 94+ messages in thread
From: Hartley Sweeten @ 2015-01-05 18:55 UTC (permalink / raw)
To: Ian Abbott, driverdev-devel; +Cc: Greg Kroah-Hartman, linux-kernel
On Monday, January 05, 2015 10:54 AM, Ian Abbott wrote:
> Most comedi drivers have a special comedi driver comment block,
> information from which can be extracted by some scripts for use in the
> "Comedilib" manual and the list of supported devices on the comedi web
> site. (Currently, the information for those places comes from the
> "out-of-tree" comedi drivers.)
>
> The "Devices:" line (and continuation lines) are supposed to be a
> comma-(and space)-separated list with the first item in this format:
>
> [Manufacturer] BOARD-NAME (comedi-board-name)
>
> The "[Manufacturer]" and "(comedi-board-name)" parts can be omitted from
> subsequent list items to decrease verbosity, in which case they are
> assumed to be the same as the preceding item.
>
> Several comedi drivers have the "Devices:" line formatted incorrectly,
> often with the use of square brackets and parentheses reversed. A few
> comedi modules have driver comments, but are just support modules for
> other drivers, so don't really need a driver comment.
Ian,
There are a number of drivers that still need the comedi comment block
converted to the normal CodingStyle format for multi-line comments.
And, as you mentioned to me before, all of the ADDI-DATA drivers
are missing the comedi comment block:
But, this is a great start to getting them cleaned up.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
^ permalink raw reply [flat|nested] 94+ messages in thread
* RE: [PATCH 00/45] staging: comedi: fix up some driver comments
@ 2015-01-05 18:55 ` Hartley Sweeten
0 siblings, 0 replies; 94+ messages in thread
From: Hartley Sweeten @ 2015-01-05 18:55 UTC (permalink / raw)
To: Ian Abbott, driverdev-devel; +Cc: Greg Kroah-Hartman, linux-kernel
On Monday, January 05, 2015 10:54 AM, Ian Abbott wrote:
> Most comedi drivers have a special comedi driver comment block,
> information from which can be extracted by some scripts for use in the
> "Comedilib" manual and the list of supported devices on the comedi web
> site. (Currently, the information for those places comes from the
> "out-of-tree" comedi drivers.)
>
> The "Devices:" line (and continuation lines) are supposed to be a
> comma-(and space)-separated list with the first item in this format:
>
> [Manufacturer] BOARD-NAME (comedi-board-name)
>
> The "[Manufacturer]" and "(comedi-board-name)" parts can be omitted from
> subsequent list items to decrease verbosity, in which case they are
> assumed to be the same as the preceding item.
>
> Several comedi drivers have the "Devices:" line formatted incorrectly,
> often with the use of square brackets and parentheses reversed. A few
> comedi modules have driver comments, but are just support modules for
> other drivers, so don't really need a driver comment.
Ian,
There are a number of drivers that still need the comedi comment block
converted to the normal CodingStyle format for multi-line comments.
And, as you mentioned to me before, all of the ADDI-DATA drivers
are missing the comedi comment block:
But, this is a great start to getting them cleaned up.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
^ permalink raw reply [flat|nested] 94+ messages in thread