From: Vincent Yang <vincent.yang.fujitsu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: arnd-r2nGTMty4D4@public.gmane.org, olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, sudeep.holla-5wv7dgnIgG8@public.gmane.org, andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Vincent Yang <Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org>, Tetsuya Nuriya <nuriya.tetsuya-+CUm20s59erQFUHtdCDX3A@public.gmane.org> Subject: [PATCH v3 2/8] mailbox: arm_mhu: add driver for ARM MHU controller Date: Fri, 9 Jan 2015 19:28:09 +0800 [thread overview] Message-ID: <1420802889-4041-1-git-send-email-Vincent.Yang@tw.fujitsu.com> (raw) In-Reply-To: <1420802369-3840-1-git-send-email-Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> From: Jassi Brar <jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Add driver for the ARM Message-Handling-Unit (MHU). Signed-off-by: Andy Green <andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Jassi Brar <jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Vincent Yang <Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya-+CUm20s59erQFUHtdCDX3A@public.gmane.org> --- .../devicetree/bindings/mailbox/arm-mhu.txt | 33 ++++ drivers/mailbox/Kconfig | 7 + drivers/mailbox/Makefile | 2 + drivers/mailbox/arm_mhu.c | 212 +++++++++++++++++++++ 4 files changed, 254 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/arm-mhu.txt create mode 100644 drivers/mailbox/arm_mhu.c diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt new file mode 100644 index 0000000..b1b9888 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt @@ -0,0 +1,33 @@ +ARM MHU Mailbox Driver +====================== + +The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has +3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any +received data. However, there is no specified way of knowing if the sent +data has been read by the remote. This driver assumes the sender polls +STAT register and the remote clears it after having read the data. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "arm,mbox-mhu" +- reg: Contains the mailbox register address range (base + address and length) +- #mbox-cells Shall be 1 +- interrupts: Contains the interrupt information corresponding to + each of the 3 links of MHU. + +Example: +-------- + + mhu: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mbox-mhu"; + reg = <0 0x2b1f0000 0x1000>; + interrupts = <0 36 4>, + <0 35 4>, + <0 37 4>; + }; diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index c04fed9..9238440 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -6,6 +6,13 @@ menuconfig MAILBOX signals. Say Y if your platform supports hardware mailboxes. if MAILBOX + +config ARM_MHU + tristate "ARM MHU Mailbox" + depends on ARM + help + Say Y here if you want to build the ARM MHU controller driver + config PL320_MBOX bool "ARM PL320 Mailbox" depends on ARM_AMBA diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index dd412c2..c83791d 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -2,6 +2,8 @@ obj-$(CONFIG_MAILBOX) += mailbox.o +obj-$(CONFIG_ARM_MHU) += arm_mhu.o + obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o diff --git a/drivers/mailbox/arm_mhu.c b/drivers/mailbox/arm_mhu.c new file mode 100644 index 0000000..8d061b6 --- /dev/null +++ b/drivers/mailbox/arm_mhu.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2013-2015 Fujitsu Semiconductor Ltd. + * Copyright (C) 2015 Linaro Ltd. + * Author: Jassi Brar <jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mailbox_controller.h> +#include <linux/platform_device.h> + +#define INTR_STAT_OFS 0x0 +#define INTR_SET_OFS 0x8 +#define INTR_CLR_OFS 0x10 + +struct mhu_link { + unsigned irq; + void __iomem *tx_reg; + void __iomem *rx_reg; +}; + +struct arm_mhu { + void __iomem *base; + struct clk *clk; + struct mhu_link mlink[3]; + struct mbox_chan chan[3]; + struct mbox_controller mbox; +}; + +static irqreturn_t mhu_rx_interrupt(int irq, void *p) +{ + struct mbox_chan *chan = p; + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->rx_reg + INTR_STAT_OFS); + mbox_chan_received_data(chan, (void *)val); + + writel_relaxed(val, mlink->rx_reg + INTR_CLR_OFS); + + return IRQ_HANDLED; +} + +static bool mhu_last_tx_done(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS); + + return (val == 0); +} + +static int mhu_send_data(struct mbox_chan *chan, void *data) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + + pr_debug("%s:%d\n", __func__, __LINE__); + if (!mhu_last_tx_done(chan)) { + pr_err("%s:%d Shouldn't have seen the day!\n", + __func__, __LINE__); + return -EBUSY; + } + + writel_relaxed((u32)data, mlink->tx_reg + INTR_SET_OFS); + + return 0; +} + +static int mhu_startup(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + int ret; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS); + writel_relaxed(val, mlink->tx_reg + INTR_CLR_OFS); + + ret = request_irq(mlink->irq, mhu_rx_interrupt, + IRQF_SHARED, "mhu_link", chan); + if (unlikely(ret)) { + pr_err("Unable to aquire IRQ\n"); + return ret; + } + + return 0; +} + +static void mhu_shutdown(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + + pr_debug("%s:%d\n", __func__, __LINE__); + free_irq(mlink->irq, chan); +} + +static struct mbox_chan_ops mhu_ops = { + .send_data = mhu_send_data, + .startup = mhu_startup, + .shutdown = mhu_shutdown, + .last_tx_done = mhu_last_tx_done, +}; + +static int arm_mhu_probe(struct platform_device *pdev) +{ + int i, err; + struct arm_mhu *mhu; + struct resource *res; + int mhu_reg[3] = {0x0, 0x20, 0x200}; + + /* Allocate memory for device */ + mhu = kzalloc(sizeof(*mhu), GFP_KERNEL); + if (!mhu) + return -ENOMEM; + + mhu->clk = clk_get(&pdev->dev, "clk"); + if (unlikely(IS_ERR(mhu->clk))) + dev_info(&pdev->dev, "unable to init clock\n"); + else + clk_prepare_enable(mhu->clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mhu->base = ioremap(res->start, resource_size(res)); + if (!mhu->base) { + dev_err(&pdev->dev, "ioremap failed.\n"); + kfree(mhu); + return -EBUSY; + } + + for (i = 0; i < 3; i++) { + mhu->chan[i].con_priv = &mhu->mlink[i]; + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + mhu->mlink[i].irq = res->start; + mhu->mlink[i].rx_reg = mhu->base + mhu_reg[i]; + mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + 0x100; + } + + mhu->mbox.dev = &pdev->dev; + mhu->mbox.chans = &mhu->chan[0]; + mhu->mbox.num_chans = 3; + mhu->mbox.ops = &mhu_ops; + mhu->mbox.txdone_irq = false; + mhu->mbox.txdone_poll = true; + mhu->mbox.txpoll_period = 10; + + platform_set_drvdata(pdev, mhu); + + err = mbox_controller_register(&mhu->mbox); + if (err) { + dev_err(&pdev->dev, "Failed to register mailboxes %d\n", err); + iounmap(mhu->base); + kfree(mhu); + } else { + dev_info(&pdev->dev, "ARM MHU Mailbox registered\n"); + } + + return 0; +} + +static int arm_mhu_remove(struct platform_device *pdev) +{ + struct arm_mhu *mhu = platform_get_drvdata(pdev); + + mbox_controller_unregister(&mhu->mbox); + + iounmap(mhu->base); + + if (!IS_ERR(mhu->clk)) + clk_disable_unprepare(mhu->clk); + + kfree(mhu); + return 0; +} + +static const struct of_device_id arm_mhu_dt_ids[] = { + { .compatible = "arm,mbox-mhu" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, arm_mhu_dt_ids); + +static struct platform_driver arm_mhu_driver = { + .driver = { + .name = "arm_mhu", + .of_match_table = arm_mhu_dt_ids, + }, + .probe = arm_mhu_probe, + .remove = arm_mhu_remove, +}; +module_platform_driver(arm_mhu_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ARM MHU Driver"); +MODULE_AUTHOR("Jassi Brar <jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"); -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: vincent.yang.fujitsu@gmail.com (Vincent Yang) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/8] mailbox: arm_mhu: add driver for ARM MHU controller Date: Fri, 9 Jan 2015 19:28:09 +0800 [thread overview] Message-ID: <1420802889-4041-1-git-send-email-Vincent.Yang@tw.fujitsu.com> (raw) In-Reply-To: <1420802369-3840-1-git-send-email-Vincent.Yang@tw.fujitsu.com> From: Jassi Brar <jaswinder.singh@linaro.org> Add driver for the ARM Message-Handling-Unit (MHU). Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@jp.fujitsu.com> --- .../devicetree/bindings/mailbox/arm-mhu.txt | 33 ++++ drivers/mailbox/Kconfig | 7 + drivers/mailbox/Makefile | 2 + drivers/mailbox/arm_mhu.c | 212 +++++++++++++++++++++ 4 files changed, 254 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/arm-mhu.txt create mode 100644 drivers/mailbox/arm_mhu.c diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt new file mode 100644 index 0000000..b1b9888 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt @@ -0,0 +1,33 @@ +ARM MHU Mailbox Driver +====================== + +The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has +3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any +received data. However, there is no specified way of knowing if the sent +data has been read by the remote. This driver assumes the sender polls +STAT register and the remote clears it after having read the data. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "arm,mbox-mhu" +- reg: Contains the mailbox register address range (base + address and length) +- #mbox-cells Shall be 1 +- interrupts: Contains the interrupt information corresponding to + each of the 3 links of MHU. + +Example: +-------- + + mhu: mailbox at 2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mbox-mhu"; + reg = <0 0x2b1f0000 0x1000>; + interrupts = <0 36 4>, + <0 35 4>, + <0 37 4>; + }; diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index c04fed9..9238440 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -6,6 +6,13 @@ menuconfig MAILBOX signals. Say Y if your platform supports hardware mailboxes. if MAILBOX + +config ARM_MHU + tristate "ARM MHU Mailbox" + depends on ARM + help + Say Y here if you want to build the ARM MHU controller driver + config PL320_MBOX bool "ARM PL320 Mailbox" depends on ARM_AMBA diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index dd412c2..c83791d 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -2,6 +2,8 @@ obj-$(CONFIG_MAILBOX) += mailbox.o +obj-$(CONFIG_ARM_MHU) += arm_mhu.o + obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o diff --git a/drivers/mailbox/arm_mhu.c b/drivers/mailbox/arm_mhu.c new file mode 100644 index 0000000..8d061b6 --- /dev/null +++ b/drivers/mailbox/arm_mhu.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2013-2015 Fujitsu Semiconductor Ltd. + * Copyright (C) 2015 Linaro Ltd. + * Author: Jassi Brar <jaswinder.singh@linaro.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mailbox_controller.h> +#include <linux/platform_device.h> + +#define INTR_STAT_OFS 0x0 +#define INTR_SET_OFS 0x8 +#define INTR_CLR_OFS 0x10 + +struct mhu_link { + unsigned irq; + void __iomem *tx_reg; + void __iomem *rx_reg; +}; + +struct arm_mhu { + void __iomem *base; + struct clk *clk; + struct mhu_link mlink[3]; + struct mbox_chan chan[3]; + struct mbox_controller mbox; +}; + +static irqreturn_t mhu_rx_interrupt(int irq, void *p) +{ + struct mbox_chan *chan = p; + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->rx_reg + INTR_STAT_OFS); + mbox_chan_received_data(chan, (void *)val); + + writel_relaxed(val, mlink->rx_reg + INTR_CLR_OFS); + + return IRQ_HANDLED; +} + +static bool mhu_last_tx_done(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS); + + return (val == 0); +} + +static int mhu_send_data(struct mbox_chan *chan, void *data) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + + pr_debug("%s:%d\n", __func__, __LINE__); + if (!mhu_last_tx_done(chan)) { + pr_err("%s:%d Shouldn't have seen the day!\n", + __func__, __LINE__); + return -EBUSY; + } + + writel_relaxed((u32)data, mlink->tx_reg + INTR_SET_OFS); + + return 0; +} + +static int mhu_startup(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + u32 val; + int ret; + + pr_debug("%s:%d\n", __func__, __LINE__); + val = readl_relaxed(mlink->tx_reg + INTR_STAT_OFS); + writel_relaxed(val, mlink->tx_reg + INTR_CLR_OFS); + + ret = request_irq(mlink->irq, mhu_rx_interrupt, + IRQF_SHARED, "mhu_link", chan); + if (unlikely(ret)) { + pr_err("Unable to aquire IRQ\n"); + return ret; + } + + return 0; +} + +static void mhu_shutdown(struct mbox_chan *chan) +{ + struct mhu_link *mlink = (struct mhu_link *)chan->con_priv; + + pr_debug("%s:%d\n", __func__, __LINE__); + free_irq(mlink->irq, chan); +} + +static struct mbox_chan_ops mhu_ops = { + .send_data = mhu_send_data, + .startup = mhu_startup, + .shutdown = mhu_shutdown, + .last_tx_done = mhu_last_tx_done, +}; + +static int arm_mhu_probe(struct platform_device *pdev) +{ + int i, err; + struct arm_mhu *mhu; + struct resource *res; + int mhu_reg[3] = {0x0, 0x20, 0x200}; + + /* Allocate memory for device */ + mhu = kzalloc(sizeof(*mhu), GFP_KERNEL); + if (!mhu) + return -ENOMEM; + + mhu->clk = clk_get(&pdev->dev, "clk"); + if (unlikely(IS_ERR(mhu->clk))) + dev_info(&pdev->dev, "unable to init clock\n"); + else + clk_prepare_enable(mhu->clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mhu->base = ioremap(res->start, resource_size(res)); + if (!mhu->base) { + dev_err(&pdev->dev, "ioremap failed.\n"); + kfree(mhu); + return -EBUSY; + } + + for (i = 0; i < 3; i++) { + mhu->chan[i].con_priv = &mhu->mlink[i]; + res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + mhu->mlink[i].irq = res->start; + mhu->mlink[i].rx_reg = mhu->base + mhu_reg[i]; + mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + 0x100; + } + + mhu->mbox.dev = &pdev->dev; + mhu->mbox.chans = &mhu->chan[0]; + mhu->mbox.num_chans = 3; + mhu->mbox.ops = &mhu_ops; + mhu->mbox.txdone_irq = false; + mhu->mbox.txdone_poll = true; + mhu->mbox.txpoll_period = 10; + + platform_set_drvdata(pdev, mhu); + + err = mbox_controller_register(&mhu->mbox); + if (err) { + dev_err(&pdev->dev, "Failed to register mailboxes %d\n", err); + iounmap(mhu->base); + kfree(mhu); + } else { + dev_info(&pdev->dev, "ARM MHU Mailbox registered\n"); + } + + return 0; +} + +static int arm_mhu_remove(struct platform_device *pdev) +{ + struct arm_mhu *mhu = platform_get_drvdata(pdev); + + mbox_controller_unregister(&mhu->mbox); + + iounmap(mhu->base); + + if (!IS_ERR(mhu->clk)) + clk_disable_unprepare(mhu->clk); + + kfree(mhu); + return 0; +} + +static const struct of_device_id arm_mhu_dt_ids[] = { + { .compatible = "arm,mbox-mhu" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, arm_mhu_dt_ids); + +static struct platform_driver arm_mhu_driver = { + .driver = { + .name = "arm_mhu", + .of_match_table = arm_mhu_dt_ids, + }, + .probe = arm_mhu_probe, + .remove = arm_mhu_remove, +}; +module_platform_driver(arm_mhu_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ARM MHU Driver"); +MODULE_AUTHOR("Jassi Brar <jassisinghbrar@gmail.com>"); -- 1.9.0
next prev parent reply other threads:[~2015-01-09 11:28 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-09 11:19 [PATCH v3 0/8] Support for Fujitsu MB86S7X SoCs Vincent Yang 2015-01-09 11:19 ` Vincent Yang [not found] ` <1420802369-3840-1-git-send-email-Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> 2015-01-09 11:24 ` [PATCH v3 1/8] ARM: Add platform support " Vincent Yang 2015-01-09 11:24 ` Vincent Yang 2015-01-09 11:28 ` Vincent Yang [this message] 2015-01-09 11:28 ` [PATCH v3 2/8] mailbox: arm_mhu: add driver for ARM MHU controller Vincent Yang [not found] ` <1420802889-4041-1-git-send-email-Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> 2015-01-09 12:51 ` Russell King - ARM Linux 2015-01-09 12:51 ` Russell King - ARM Linux [not found] ` <20150109125102.GL12302-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org> 2015-01-09 13:19 ` Jassi Brar 2015-01-09 13:19 ` Jassi Brar 2015-01-09 15:24 ` Russell King - ARM Linux 2015-01-09 15:24 ` Russell King - ARM Linux [not found] ` <20150109152402.GQ12302-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org> 2015-01-09 15:29 ` Jassi Brar 2015-01-09 15:29 ` Jassi Brar 2015-01-09 11:29 ` [PATCH v3 4/8] clk: Add clock driver for mb86s7x Vincent Yang 2015-01-09 11:29 ` Vincent Yang [not found] ` <1420802977-4126-1-git-send-email-Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> 2015-01-09 12:39 ` Russell King - ARM Linux 2015-01-09 12:39 ` Russell King - ARM Linux [not found] ` <20150109123958.GJ12302-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org> 2015-01-09 13:03 ` Jassi Brar 2015-01-09 13:03 ` Jassi Brar 2015-01-09 11:35 ` [PATCH v3 7/8] of: add Fujitsu vendor prefix Vincent Yang 2015-01-09 11:35 ` Vincent Yang 2015-01-09 11:28 ` [PATCH v3 3/8] ARM: MB86S7X: Add MCPM support Vincent Yang 2015-01-09 12:41 ` Russell King - ARM Linux 2015-01-09 13:23 ` Jassi Brar 2015-01-09 20:04 ` Nicolas Pitre 2015-01-09 11:33 ` [PATCH v3 5/8] gpio: Add Fujitsu MB86S7x GPIO driver Vincent Yang 2015-01-09 11:33 ` Vincent Yang [not found] ` <1420803212-4350-1-git-send-email-Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org> 2015-01-09 12:52 ` Russell King - ARM Linux 2015-01-09 12:52 ` Russell King - ARM Linux 2015-01-09 13:20 ` Jassi Brar 2015-01-09 13:20 ` Jassi Brar 2015-01-11 22:40 ` Linus Walleij 2015-01-11 22:40 ` Linus Walleij 2015-01-12 0:04 ` Linus Walleij 2015-01-12 0:04 ` Linus Walleij 2015-01-09 11:34 ` [PATCH v3 6/8] dt: mb86s7x: add dt files for MB86S7x evbs Vincent Yang 2015-01-09 11:34 ` Vincent Yang 2015-01-09 11:36 ` [PATCH v3 8/8] ARM: MB86S7x: Add configs Vincent Yang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1420802889-4041-1-git-send-email-Vincent.Yang@tw.fujitsu.com \ --to=vincent.yang.fujitsu-re5jqeeqqe8avxtiumwx3w@public.gmane.org \ --cc=Vincent.Yang-l16TxrwUIHTQFUHtdCDX3A@public.gmane.org \ --cc=andy.green-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=arnd-r2nGTMty4D4@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \ --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \ --cc=jaswinder.singh-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=nuriya.tetsuya-+CUm20s59erQFUHtdCDX3A@public.gmane.org \ --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \ --cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=sudeep.holla-5wv7dgnIgG8@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.