From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/7] ARM: zynq: Enable pinctrl
Date: Fri, 09 Jan 2015 15:43:49 +0000 [thread overview]
Message-ID: <1420818231-13451-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1420818231-13451-1-git-send-email-soren.brinkmann@xilinx.com>
Select pinctrl and the Zynq pinctrl driver.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since RFC v2:
- separate mach-zynq changes in their own patch
---
arch/arm/mach-zynq/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
select HAVE_ARM_TWD if SMP
select ICST
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_ZYNQ
select SOC_BUS
help
Support for Xilinx Zynq ARM Cortex A9 Platform
--
2.2.1.1.gb42cc81
WARNING: multiple messages have this Message-ID (diff)
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>,
"Michal Simek" <michal.simek@xilinx.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Alessandro Rubini" <rubini@unipv.it>,
"Heiko Stuebner" <heiko@sntech.de>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
linux-rockchip@lists.infradead.org, linux-sh@vger.kernel.org,
"Ivan T. Ivanov" <iivanov@mm-sol.com>,
"Bjorn Andersson" <bjorn.andersson@sonymobile.com>,
"Beniamino Galvani" <b.galvani@gmail.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
"Grant Likely" <grant.likely@linaro.org>,
devicetree@vger.kernel.org
Subject: [PATCH v4 5/7] ARM: zynq: Enable pinctrl
Date: Fri, 9 Jan 2015 07:43:49 -0800 [thread overview]
Message-ID: <1420818231-13451-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1420818231-13451-1-git-send-email-soren.brinkmann@xilinx.com>
Select pinctrl and the Zynq pinctrl driver.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since RFC v2:
- separate mach-zynq changes in their own patch
---
arch/arm/mach-zynq/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
select HAVE_ARM_TWD if SMP
select ICST
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_ZYNQ
select SOC_BUS
help
Support for Xilinx Zynq ARM Cortex A9 Platform
--
2.2.1.1.gb42cc81
WARNING: multiple messages have this Message-ID (diff)
From: soren.brinkmann@xilinx.com (Soren Brinkmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/7] ARM: zynq: Enable pinctrl
Date: Fri, 9 Jan 2015 07:43:49 -0800 [thread overview]
Message-ID: <1420818231-13451-6-git-send-email-soren.brinkmann@xilinx.com> (raw)
In-Reply-To: <1420818231-13451-1-git-send-email-soren.brinkmann@xilinx.com>
Select pinctrl and the Zynq pinctrl driver.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since RFC v2:
- separate mach-zynq changes in their own patch
---
arch/arm/mach-zynq/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
select HAVE_ARM_TWD if SMP
select ICST
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_ZYNQ
select SOC_BUS
help
Support for Xilinx Zynq ARM Cortex A9 Platform
--
2.2.1.1.gb42cc81
next prev parent reply other threads:[~2015-01-09 15:43 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 15:43 [PATCH v4 0/7] pinctrl support for Zynq Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` [PATCH v4 1/7] pinctrl: pinconf-generic: Infer map type from DT property Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` [PATCH v4 2/7] pinctrl: pinconf-generic: Allow driver to specify DT params Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` [PATCH v4 3/7] pinctrl: zynq: Document DT binding Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` [PATCH v4 4/7] pinctrl: Add driver for Zynq Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann [this message]
2015-01-09 15:43 ` [PATCH v4 5/7] ARM: zynq: Enable pinctrl Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-11 21:36 ` Linus Walleij
2015-01-11 21:36 ` Linus Walleij
2015-01-11 21:36 ` Linus Walleij
2015-01-11 21:36 ` Linus Walleij
2015-01-12 7:35 ` Michal Simek
2015-01-12 7:35 ` Michal Simek
2015-01-12 7:35 ` Michal Simek
2015-01-12 7:35 ` Michal Simek
2015-01-09 15:43 ` [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-11 21:38 ` Linus Walleij
2015-01-11 21:38 ` Linus Walleij
2015-01-11 21:38 ` Linus Walleij
2015-01-11 21:38 ` Linus Walleij
2015-01-12 7:27 ` Michal Simek
2015-01-12 7:27 ` Michal Simek
2015-01-12 7:27 ` Michal Simek
2015-01-12 7:27 ` Michal Simek
2015-01-27 0:00 ` Andreas Färber
2015-01-27 0:00 ` Andreas Färber
2015-01-27 0:00 ` Andreas Färber
2015-01-27 0:00 ` Andreas Färber
2015-01-28 14:22 ` Michal Simek
2015-01-28 14:22 ` Michal Simek
2015-01-28 14:22 ` Michal Simek
2015-01-28 14:22 ` Michal Simek
2015-01-26 23:57 ` Andreas Färber
2015-01-26 23:57 ` Andreas Färber
2015-01-26 23:57 ` Andreas Färber
2015-01-26 23:57 ` Andreas Färber
2015-01-27 0:32 ` Sören Brinkmann
2015-01-27 0:32 ` Sören Brinkmann
2015-01-27 0:32 ` Sören Brinkmann
2015-01-27 0:32 ` Sören Brinkmann
2015-01-27 2:05 ` Sören Brinkmann
2015-01-27 2:05 ` Sören Brinkmann
2015-01-27 2:05 ` Sören Brinkmann
2015-01-27 2:05 ` Sören Brinkmann
2015-01-09 15:43 ` [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-09 15:43 ` Soren Brinkmann
2015-01-11 21:40 ` Linus Walleij
2015-01-11 21:40 ` Linus Walleij
2015-01-11 21:40 ` Linus Walleij
2015-01-11 21:40 ` Linus Walleij
2015-01-12 9:09 ` Ivan T. Ivanov
2015-01-12 9:09 ` Ivan T. Ivanov
2015-01-12 9:09 ` Ivan T. Ivanov
2015-01-12 9:09 ` Ivan T. Ivanov
2015-01-09 16:53 ` [PATCH v4 0/7] pinctrl support for Zynq Sören Brinkmann
2015-01-09 16:53 ` Sören Brinkmann
2015-01-09 16:53 ` Sören Brinkmann
2015-01-09 16:53 ` Sören Brinkmann
2015-01-11 21:41 ` Linus Walleij
2015-01-11 21:41 ` Linus Walleij
2015-01-11 21:41 ` Linus Walleij
2015-01-11 21:41 ` Linus Walleij
2015-01-11 23:01 ` Sören Brinkmann
2015-01-11 23:01 ` Sören Brinkmann
2015-01-11 23:01 ` Sören Brinkmann
2015-01-11 23:01 ` Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420818231-13451-6-git-send-email-soren.brinkmann@xilinx.com \
--to=soren.brinkmann@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.