[PATCH v4 0/7] pinctrl support for Zynq

[PATCH v4 0/7] pinctrl support for Zynq

[Soren Brinkmann]

Hi Linus,

I rebased my branch onto your current pinctrl/devel. Other than that
this should be exactly what has been sent out as v3. This time I'll use
the gmail SMTP again, which hopefully resolves the encoding issue.

	Thanks,
	Sören

Soren Brinkmann (7):
  pinctrl: pinconf-generic: Infer map type from DT property
  pinctrl: pinconf-generic: Allow driver to specify DT params
  pinctrl: zynq: Document DT binding
  pinctrl: Add driver for Zynq
  ARM: zynq: Enable pinctrl
  ARM: zynq: DT: Add pinctrl information
  pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         |  104 ++
 arch/arm/boot/dts/zynq-7000.dtsi                   |    8 +-
 arch/arm/boot/dts/zynq-zc702.dts                   |  181 +++
 arch/arm/boot/dts/zynq-zc706.dts                   |  152 +++
 arch/arm/mach-zynq/Kconfig                         |    2 +
 drivers/pinctrl/Kconfig                            |    8 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/nomadik/pinctrl-abx500.c           |    2 +-
 drivers/pinctrl/pinconf-generic.c                  |  199 ++--
 drivers/pinctrl/pinconf.c                          |    4 +-
 drivers/pinctrl/pinconf.h                          |   22 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |    2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c               |    2 +-
 drivers/pinctrl/pinctrl-tz1090.c                   |    2 +-
 drivers/pinctrl/pinctrl-zynq.c                     | 1176 ++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |  125 +--
 drivers/pinctrl/sh-pfc/pinctrl.c                   |    2 +-
 include/linux/pinctrl/pinconf-generic.h            |   29 +
 include/linux/pinctrl/pinctrl.h                    |    9 +
 19 files changed, 1808 insertions(+), 222 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

-- 
2.2.1.1.gb42cc81

[PATCH v4 0/7] pinctrl support for Zynq

[Soren Brinkmann]

Hi Linus,

I rebased my branch onto your current pinctrl/devel. Other than that
this should be exactly what has been sent out as v3. This time I'll use
the gmail SMTP again, which hopefully resolves the encoding issue.

	Thanks,
	S?ren

Soren Brinkmann (7):
  pinctrl: pinconf-generic: Infer map type from DT property
  pinctrl: pinconf-generic: Allow driver to specify DT params
  pinctrl: zynq: Document DT binding
  pinctrl: Add driver for Zynq
  ARM: zynq: Enable pinctrl
  ARM: zynq: DT: Add pinctrl information
  pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         |  104 ++
 arch/arm/boot/dts/zynq-7000.dtsi                   |    8 +-
 arch/arm/boot/dts/zynq-zc702.dts                   |  181 +++
 arch/arm/boot/dts/zynq-zc706.dts                   |  152 +++
 arch/arm/mach-zynq/Kconfig                         |    2 +
 drivers/pinctrl/Kconfig                            |    8 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/nomadik/pinctrl-abx500.c           |    2 +-
 drivers/pinctrl/pinconf-generic.c                  |  199 ++--
 drivers/pinctrl/pinconf.c                          |    4 +-
 drivers/pinctrl/pinconf.h                          |   22 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |    2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c               |    2 +-
 drivers/pinctrl/pinctrl-tz1090.c                   |    2 +-
 drivers/pinctrl/pinctrl-zynq.c                     | 1176 ++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |  125 +--
 drivers/pinctrl/sh-pfc/pinctrl.c                   |    2 +-
 include/linux/pinctrl/pinconf-generic.h            |   29 +
 include/linux/pinctrl/pinctrl.h                    |    9 +
 19 files changed, 1808 insertions(+), 222 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

-- 
2.2.1.1.gb42cc81

[PATCH v4 0/7] pinctrl support for Zynq

[Soren Brinkmann]

Hi Linus,

I rebased my branch onto your current pinctrl/devel. Other than that
this should be exactly what has been sent out as v3. This time I'll use
the gmail SMTP again, which hopefully resolves the encoding issue.

	Thanks,
	Sören

Soren Brinkmann (7):
  pinctrl: pinconf-generic: Infer map type from DT property
  pinctrl: pinconf-generic: Allow driver to specify DT params
  pinctrl: zynq: Document DT binding
  pinctrl: Add driver for Zynq
  ARM: zynq: Enable pinctrl
  ARM: zynq: DT: Add pinctrl information
  pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         |  104 ++
 arch/arm/boot/dts/zynq-7000.dtsi                   |    8 +-
 arch/arm/boot/dts/zynq-zc702.dts                   |  181 +++
 arch/arm/boot/dts/zynq-zc706.dts                   |  152 +++
 arch/arm/mach-zynq/Kconfig                         |    2 +
 drivers/pinctrl/Kconfig                            |    8 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/nomadik/pinctrl-abx500.c           |    2 +-
 drivers/pinctrl/pinconf-generic.c                  |  199 ++--
 drivers/pinctrl/pinconf.c                          |    4 +-
 drivers/pinctrl/pinconf.h                          |   22 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |    2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c               |    2 +-
 drivers/pinctrl/pinctrl-tz1090.c                   |    2 +-
 drivers/pinctrl/pinctrl-zynq.c                     | 1176 ++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |  125 +--
 drivers/pinctrl/sh-pfc/pinctrl.c                   |    2 +-
 include/linux/pinctrl/pinconf-generic.h            |   29 +
 include/linux/pinctrl/pinctrl.h                    |    9 +
 19 files changed, 1808 insertions(+), 222 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

-- 
2.2.1.1.gb42cc81

[PATCH v4 1/7] pinctrl: pinconf-generic: Infer map type from DT property

[Soren Brinkmann]

With the new 'groups' property, the DT parser can infer the map type
from the fact whether 'pins' or 'groups' is used to specify the pin
group to work on.
To maintain backwards compatibitliy with current usage of the DT
binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the
parsing function as type.
Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced,
which can be used by drivers as generic callback for dt_node_to_map() to
leverage the new feature.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v2:
 - rename dt_pin_specifier to subnode_target_type
 - add additional comment in header file explaining passing an invalid
   map type
 - mention map_all() helper in commit message
Changes since RFC v2:
 - none
---
 drivers/pinctrl/pinconf-generic.c       | 17 ++++++++++++++---
 include/linux/pinctrl/pinconf-generic.h | 11 +++++++++++
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index f78b416d7984..21b3d90ebb2d 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -264,6 +264,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned reserve;
 	struct property *prop;
 	const char *group;
+	const char *subnode_target_type = "pins";
 
 	ret = of_property_read_string(np, "function", &function);
 	if (ret < 0) {
@@ -284,10 +285,20 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		reserve++;
 	if (num_configs)
 		reserve++;
+
 	ret = of_property_count_strings(np, "pins");
 	if (ret < 0) {
-		dev_err(dev, "could not parse property pins\n");
-		goto exit;
+		ret = of_property_count_strings(np, "groups");
+		if (ret < 0) {
+			dev_err(dev, "could not parse property pins/groups\n");
+			goto exit;
+		}
+		if (type = PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		subnode_target_type = "groups";
+	} else {
+		if (type = PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_PIN;
 	}
 	reserve *= ret;
 
@@ -296,7 +307,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	if (ret < 0)
 		goto exit;
 
-	of_property_for_each_string(np, "pins", prop, group) {
+	of_property_for_each_string(np, subnode_target_type, prop, group) {
 		if (function) {
 			ret = pinctrl_utils_add_map_mux(pctldev, map,
 					reserved_maps, num_maps, group,
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index d578a60eff23..83c89f5ab705 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -174,6 +174,17 @@ static inline int pinconf_generic_dt_node_to_map_pin(
 			PIN_MAP_TYPE_CONFIGS_PIN);
 }
 
+static inline int pinconf_generic_dt_node_to_map_all(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	/*
+	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
+	 * to infer the map type from the DT properties used.
+	 */
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_INVALID);
+}
 #endif
 
 #endif /* CONFIG_GENERIC_PINCONF */
-- 
2.2.1.1.gb42cc81

[PATCH v4 1/7] pinctrl: pinconf-generic: Infer map type from DT property

[Soren Brinkmann]

With the new 'groups' property, the DT parser can infer the map type
from the fact whether 'pins' or 'groups' is used to specify the pin
group to work on.
To maintain backwards compatibitliy with current usage of the DT
binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the
parsing function as type.
Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced,
which can be used by drivers as generic callback for dt_node_to_map() to
leverage the new feature.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since v2:
 - rename dt_pin_specifier to subnode_target_type
 - add additional comment in header file explaining passing an invalid
   map type
 - mention map_all() helper in commit message
Changes since RFC v2:
 - none
---
 drivers/pinctrl/pinconf-generic.c       | 17 ++++++++++++++---
 include/linux/pinctrl/pinconf-generic.h | 11 +++++++++++
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index f78b416d7984..21b3d90ebb2d 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -264,6 +264,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned reserve;
 	struct property *prop;
 	const char *group;
+	const char *subnode_target_type = "pins";
 
 	ret = of_property_read_string(np, "function", &function);
 	if (ret < 0) {
@@ -284,10 +285,20 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		reserve++;
 	if (num_configs)
 		reserve++;
+
 	ret = of_property_count_strings(np, "pins");
 	if (ret < 0) {
-		dev_err(dev, "could not parse property pins\n");
-		goto exit;
+		ret = of_property_count_strings(np, "groups");
+		if (ret < 0) {
+			dev_err(dev, "could not parse property pins/groups\n");
+			goto exit;
+		}
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		subnode_target_type = "groups";
+	} else {
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_PIN;
 	}
 	reserve *= ret;
 
@@ -296,7 +307,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	if (ret < 0)
 		goto exit;
 
-	of_property_for_each_string(np, "pins", prop, group) {
+	of_property_for_each_string(np, subnode_target_type, prop, group) {
 		if (function) {
 			ret = pinctrl_utils_add_map_mux(pctldev, map,
 					reserved_maps, num_maps, group,
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index d578a60eff23..83c89f5ab705 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -174,6 +174,17 @@ static inline int pinconf_generic_dt_node_to_map_pin(
 			PIN_MAP_TYPE_CONFIGS_PIN);
 }
 
+static inline int pinconf_generic_dt_node_to_map_all(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	/*
+	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
+	 * to infer the map type from the DT properties used.
+	 */
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_INVALID);
+}
 #endif
 
 #endif /* CONFIG_GENERIC_PINCONF */
-- 
2.2.1.1.gb42cc81

[PATCH v4 1/7] pinctrl: pinconf-generic: Infer map type from DT property

[Soren Brinkmann]

With the new 'groups' property, the DT parser can infer the map type
from the fact whether 'pins' or 'groups' is used to specify the pin
group to work on.
To maintain backwards compatibitliy with current usage of the DT
binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the
parsing function as type.
Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced,
which can be used by drivers as generic callback for dt_node_to_map() to
leverage the new feature.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v2:
 - rename dt_pin_specifier to subnode_target_type
 - add additional comment in header file explaining passing an invalid
   map type
 - mention map_all() helper in commit message
Changes since RFC v2:
 - none
---
 drivers/pinctrl/pinconf-generic.c       | 17 ++++++++++++++---
 include/linux/pinctrl/pinconf-generic.h | 11 +++++++++++
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index f78b416d7984..21b3d90ebb2d 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -264,6 +264,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned reserve;
 	struct property *prop;
 	const char *group;
+	const char *subnode_target_type = "pins";
 
 	ret = of_property_read_string(np, "function", &function);
 	if (ret < 0) {
@@ -284,10 +285,20 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		reserve++;
 	if (num_configs)
 		reserve++;
+
 	ret = of_property_count_strings(np, "pins");
 	if (ret < 0) {
-		dev_err(dev, "could not parse property pins\n");
-		goto exit;
+		ret = of_property_count_strings(np, "groups");
+		if (ret < 0) {
+			dev_err(dev, "could not parse property pins/groups\n");
+			goto exit;
+		}
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		subnode_target_type = "groups";
+	} else {
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_PIN;
 	}
 	reserve *= ret;
 
@@ -296,7 +307,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	if (ret < 0)
 		goto exit;
 
-	of_property_for_each_string(np, "pins", prop, group) {
+	of_property_for_each_string(np, subnode_target_type, prop, group) {
 		if (function) {
 			ret = pinctrl_utils_add_map_mux(pctldev, map,
 					reserved_maps, num_maps, group,
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index d578a60eff23..83c89f5ab705 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -174,6 +174,17 @@ static inline int pinconf_generic_dt_node_to_map_pin(
 			PIN_MAP_TYPE_CONFIGS_PIN);
 }
 
+static inline int pinconf_generic_dt_node_to_map_all(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	/*
+	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
+	 * to infer the map type from the DT properties used.
+	 */
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_INVALID);
+}
 #endif
 
 #endif /* CONFIG_GENERIC_PINCONF */
-- 
2.2.1.1.gb42cc81


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/7] pinctrl: pinconf-generic: Infer map type from DT property

[Soren Brinkmann]

With the new 'groups' property, the DT parser can infer the map type
from the fact whether 'pins' or 'groups' is used to specify the pin
group to work on.
To maintain backwards compatibitliy with current usage of the DT
binding, this is only done when PIN_MAP_TYPE_INVALID is passed to the
parsing function as type.
Also, a new helper 'pinconf_generic_dt_node_to_map_all()' is introduced,
which can be used by drivers as generic callback for dt_node_to_map() to
leverage the new feature.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v2:
 - rename dt_pin_specifier to subnode_target_type
 - add additional comment in header file explaining passing an invalid
   map type
 - mention map_all() helper in commit message
Changes since RFC v2:
 - none
---
 drivers/pinctrl/pinconf-generic.c       | 17 ++++++++++++++---
 include/linux/pinctrl/pinconf-generic.h | 11 +++++++++++
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index f78b416d7984..21b3d90ebb2d 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -264,6 +264,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned reserve;
 	struct property *prop;
 	const char *group;
+	const char *subnode_target_type = "pins";
 
 	ret = of_property_read_string(np, "function", &function);
 	if (ret < 0) {
@@ -284,10 +285,20 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		reserve++;
 	if (num_configs)
 		reserve++;
+
 	ret = of_property_count_strings(np, "pins");
 	if (ret < 0) {
-		dev_err(dev, "could not parse property pins\n");
-		goto exit;
+		ret = of_property_count_strings(np, "groups");
+		if (ret < 0) {
+			dev_err(dev, "could not parse property pins/groups\n");
+			goto exit;
+		}
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		subnode_target_type = "groups";
+	} else {
+		if (type == PIN_MAP_TYPE_INVALID)
+			type = PIN_MAP_TYPE_CONFIGS_PIN;
 	}
 	reserve *= ret;
 
@@ -296,7 +307,7 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	if (ret < 0)
 		goto exit;
 
-	of_property_for_each_string(np, "pins", prop, group) {
+	of_property_for_each_string(np, subnode_target_type, prop, group) {
 		if (function) {
 			ret = pinctrl_utils_add_map_mux(pctldev, map,
 					reserved_maps, num_maps, group,
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index d578a60eff23..83c89f5ab705 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -174,6 +174,17 @@ static inline int pinconf_generic_dt_node_to_map_pin(
 			PIN_MAP_TYPE_CONFIGS_PIN);
 }
 
+static inline int pinconf_generic_dt_node_to_map_all(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	/*
+	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
+	 * to infer the map type from the DT properties used.
+	 */
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_INVALID);
+}
 #endif
 
 #endif /* CONFIG_GENERIC_PINCONF */
-- 
2.2.1.1.gb42cc81

[PATCH v4 2/7] pinctrl: pinconf-generic: Allow driver to specify DT params

[Soren Brinkmann]

Additionally to the generic DT parameters, allow drivers to provide
driver-specific DT parameters to be used with the generic parser
infrastructure.

To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf
option to the core. In order to pass this kind of information, the
related data structures - 'struct pinconf_generic_dt_params',
'pin_config_item' - are moved from pinconf internals to the
pinconf-generic header.

Additionally pinconfg-generic is refactored to not only iterate over the
generic pinconf parameters but also take the parameters into account
that are provided through the driver's 'struct pinctrl_desc'.
In particular 'pinconf_generic_parse_dt_config()' and
'pinconf_generic_dump' helpers are split into two parts each. In order
to have a more generic helper that can be used to process the generic
parameters as well as the driver-specific ones.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
v2:
 - fix typo
 - add missing documentation for @conf_items member in struct
 - rebase to pinctrl/devel: conflict in abx500
 - rename _pinconf_generic_dump() to pinconf_generic_dump_one()
 - removed '_' from _parse_dt_cfg()
 - removed BUG_ONs, error condition is handled in if statements
 - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin
   helpers
   - fixed up corresponding call sites
   - renamed pinconf_generic_dump() to pinconf_generic_dump_pins()
   - added kernel-doc to pinconf_generic_dump_pins()
 - add kernel-doc
 - more verbose commit message
---
 drivers/pinctrl/nomadik/pinctrl-abx500.c |   2 +-
 drivers/pinctrl/pinconf-generic.c        | 182 +++++++++++++++++--------------
 drivers/pinctrl/pinconf.c                |   4 +-
 drivers/pinctrl/pinconf.h                |  22 ++--
 drivers/pinctrl/pinctrl-rockchip.c       |   2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c     |   2 +-
 drivers/pinctrl/pinctrl-tz1090.c         |   2 +-
 drivers/pinctrl/sh-pfc/pinctrl.c         |   2 +-
 include/linux/pinctrl/pinconf-generic.h  |  18 +++
 include/linux/pinctrl/pinctrl.h          |   9 ++
 10 files changed, 141 insertions(+), 104 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index 3d6d97228523..1806b24faa14 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -914,7 +914,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		}
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs);
 	if (nconfigs) {
 		const char *gpio_name;
 		const char *pin;
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 21b3d90ebb2d..e0886665b70a 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -27,17 +27,6 @@
 #include "pinctrl-utils.h"
 
 #ifdef CONFIG_DEBUG_FS
-
-struct pin_config_item {
-	const enum pin_config_param param;
-	const char * const display;
-	const char * const format;
-	bool has_arg;
-};
-
-#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
-				.has_arg = d }
-
 static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
 	PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
@@ -60,22 +49,25 @@ static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
 };
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin)
+static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
+				     struct seq_file *s, const char *gname,
+				     unsigned pin,
+				     const struct pin_config_item *items,
+				     int nitems)
 {
-	const struct pinconf_ops *ops = pctldev->desc->confops;
 	int i;
 
-	if (!ops->is_generic)
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
+	for (i = 0; i < nitems; i++) {
 		unsigned long config;
 		int ret;
 
 		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_get_for_pin(pctldev, pin, &config);
+		config = pinconf_to_config_packed(items[i].param, 0);
+		if (gname)
+			ret = pin_config_group_get(dev_name(pctldev->dev),
+						   gname, &config);
+		else
+			ret = pin_config_get_for_pin(pctldev, pin, &config);
 		/* These are legal errors */
 		if (ret = -EINVAL || ret = -ENOTSUPP)
 			continue;
@@ -85,56 +77,46 @@ void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
 		}
 		/* Space between multiple configs */
 		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
+		seq_puts(s, items[i].display);
 		/* Print unit if available */
-		if (conf_items[i].has_arg) {
+		if (items[i].has_arg) {
 			seq_printf(s, " (%u",
 				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
+			if (items[i].format)
+				seq_printf(s, " %s)", items[i].format);
 			else
 				seq_puts(s, ")");
 		}
 	}
 }
 
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname)
+/**
+ * pinconf_generic_dump_pins - Print information about pin or group of pins
+ * @pctldev:	Pincontrol device
+ * @s:		File to print to
+ * @gname:	Group name specifying pins
+ * @pin:	Pin number specyfying pin
+ *
+ * Print the pinconf configuration for the requested pin(s) to @s. Pins can be
+ * specified either by pin using @pin or by group using @gname. Only one needs
+ * to be specified the other can be NULL/0.
+ */
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
+			       const char *gname, unsigned pin)
 {
 	const struct pinconf_ops *ops = pctldev->desc->confops;
-	int i;
 
 	if (!ops->is_generic)
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
-		unsigned long config;
-		int ret;
-
-		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_group_get(dev_name(pctldev->dev), gname,
-					   &config);
-		/* These are legal errors */
-		if (ret = -EINVAL || ret = -ENOTSUPP)
-			continue;
-		if (ret) {
-			seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
-			continue;
-		}
-		/* Space between multiple configs */
-		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
-		/* Print unit if available */
-		if (conf_items[i].has_arg) {
-			seq_printf(s, " (%u",
-				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
-			else
-				seq_puts(s, ")");
-		}
-	}
+	/* generic parameters */
+	pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
+				 ARRAY_SIZE(conf_items));
+	/* driver-specific parameters */
+	if (pctldev->desc->num_dt_params && pctldev->desc->conf_items)
+		pinconf_generic_dump_one(pctldev, s, gname, pin,
+					 pctldev->desc->conf_items,
+					 pctldev->desc->num_dt_params);
 }
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
@@ -148,17 +130,21 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 		seq_printf(s, "%s: 0x%x", conf_items[i].display,
 			   pinconf_to_config_argument(config));
 	}
+
+	if (!pctldev->desc->num_dt_params || !pctldev->desc->conf_items)
+		return;
+
+	for (i = 0; i < pctldev->desc->num_dt_params; i++) {
+		if (pinconf_to_config_param(config) != pctldev->desc->conf_items[i].param)
+			continue;
+		seq_printf(s, "%s: 0x%x", pctldev->desc->conf_items[i].display,
+			   pinconf_to_config_argument(config));
+	}
 }
 EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
 #endif
 
 #ifdef CONFIG_OF
-struct pinconf_generic_dt_params {
-	const char * const property;
-	enum pin_config_param param;
-	u32 default_value;
-};
-
 static const struct pinconf_generic_dt_params dt_params[] = {
 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
 	{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
@@ -184,6 +170,47 @@ static const struct pinconf_generic_dt_params dt_params[] = {
 };
 
 /**
+ * parse_dt_cfg - Parse DT pinconf parameters
+ * @np:	DT node
+ * @params:	Array of describing DT parameters
+ * @count:	Number of entries in @params
+ * @cfg:	Array of parsed config options
+ * @ncfg:	Number of entries in @cfg
+ *
+ * Parse the config options described in @params from @np and puts the result
+ * in @cfg. @cfg does not need to be empty, entries are added beggining at
+ * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg
+ * needs to have enough memory allocated to hold all possible entries.
+ */
+static void parse_dt_cfg(struct device_node *np,
+			 const struct pinconf_generic_dt_params *params,
+			 unsigned int count, unsigned long *cfg,
+			 unsigned int *ncfg)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		u32 val;
+		int ret;
+		const struct pinconf_generic_dt_params *par = &params[i];
+
+		ret = of_property_read_u32(np, par->property, &val);
+
+		/* property not found */
+		if (ret = -EINVAL)
+			continue;
+
+		/* use default value, when no value is specified */
+		if (ret)
+			val = par->default_value;
+
+		pr_debug("found %s with value %u\n", par->property, val);
+		cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
+		(*ncfg)++;
+	}
+}
+
+/**
  * pinconf_generic_parse_dt_config()
  * parse the config properties into generic pinconfig values.
  * @np: node containing the pinconfig properties
@@ -191,39 +218,29 @@ static const struct pinconf_generic_dt_params dt_params[] = {
  * @nconfigs: umber of configurations
  */
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs)
 {
 	unsigned long *cfg;
-	unsigned int ncfg = 0;
+	unsigned int max_cfg, ncfg = 0;
 	int ret;
-	int i;
-	u32 val;
 
 	if (!np)
 		return -EINVAL;
 
 	/* allocate a temporary array big enough to hold one of each option */
-	cfg = kzalloc(sizeof(*cfg) * ARRAY_SIZE(dt_params), GFP_KERNEL);
+	max_cfg = ARRAY_SIZE(dt_params);
+	if (pctldev)
+		max_cfg += pctldev->desc->num_dt_params;
+	cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
 		return -ENOMEM;
 
-	for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
-		const struct pinconf_generic_dt_params *par = &dt_params[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret = -EINVAL)
-			continue;
-
-		/* use default value, when no value is specified */
-		if (ret)
-			val = par->default_value;
-
-		pr_debug("found %s with value %u\n", par->property, val);
-		cfg[ncfg] = pinconf_to_config_packed(par->param, val);
-		ncfg++;
-	}
+	parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
+	if (pctldev && pctldev->desc->num_dt_params && pctldev->desc->params)
+		parse_dt_cfg(np, pctldev->desc->params,
+			      pctldev->desc->num_dt_params, cfg, &ncfg);
 
 	ret = 0;
 
@@ -274,7 +291,8 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
 	if (ret < 0) {
 		dev_err(dev, "could not parse node property\n");
 		return ret;
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 8bfa0643e5dc..1fc09dc20199 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -288,7 +288,7 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_pin(pctldev, s, pin);
+	pinconf_generic_dump_pins(pctldev, s, NULL, pin);
 	if (ops && ops->pin_config_dbg_show)
 		ops->pin_config_dbg_show(pctldev, s, pin);
 }
@@ -333,7 +333,7 @@ static void pinconf_dump_group(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_group(pctldev, s, gname);
+	pinconf_generic_dump_pins(pctldev, s, gname, 0);
 	if (ops && ops->pin_config_group_dbg_show)
 		ops->pin_config_group_dbg_show(pctldev, s, selector);
 }
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index a4a5417e1413..55c75780b3b2 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -92,26 +92,17 @@ static inline void pinconf_init_device_debugfs(struct dentry *devroot,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin);
-
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname);
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+			       struct seq_file *s, const char *gname,
+			       unsigned pin);
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 				 struct seq_file *s, unsigned long config);
 #else
 
-static inline void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-					    struct seq_file *s,
-					    unsigned pin)
-{
-	return;
-}
-
-static inline void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-					      struct seq_file *s,
-					      const char *gname)
+static inline void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+					     struct seq_file *s,
+					     const char *gname, unsigned pin)
 {
 	return;
 }
@@ -126,6 +117,7 @@ static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs);
 #endif
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index ba74f0aa60c7..7625f333ab07 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1140,7 +1140,7 @@ static int rockchip_pinctrl_parse_groups(struct device_node *np,
 			return -EINVAL;
 
 		np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
-		ret = pinconf_generic_parse_dt_config(np_config,
+		ret = pinconf_generic_parse_dt_config(np_config, NULL,
 				&grp->data[j].configs, &grp->data[j].nconfigs);
 		if (ret)
 			return ret;
diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c
index 146e48a9b839..fab6aafa6a9f 100644
--- a/drivers/pinctrl/pinctrl-tz1090-pdc.c
+++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c
@@ -415,7 +415,7 @@ static int tz1090_pdc_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c
index df8cb1e5b7b4..8bd73075f9dd 100644
--- a/drivers/pinctrl/pinctrl-tz1090.c
+++ b/drivers/pinctrl/pinctrl-tz1090.c
@@ -1131,7 +1131,7 @@ static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c
index 910deaefa0ac..072e7c62cab7 100644
--- a/drivers/pinctrl/sh-pfc/pinctrl.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl.c
@@ -122,7 +122,7 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np,
 		return ret;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret < 0)
 		return ret;
 
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 83c89f5ab705..342409f7f3ec 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -115,6 +115,18 @@ enum pin_config_param {
 	PIN_CONFIG_END = 0x7FFF,
 };
 
+#ifdef CONFIG_DEBUG_FS
+#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
+				.has_arg = d }
+
+struct pin_config_item {
+	const enum pin_config_param param;
+	const char * const display;
+	const char * const format;
+	bool has_arg;
+};
+#endif /* CONFIG_DEBUG_FS */
+
 /*
  * Helpful configuration macro to be used in tables etc.
  */
@@ -150,6 +162,12 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param
 struct pinctrl_dev;
 struct pinctrl_map;
 
+struct pinconf_generic_dt_params {
+	const char * const property;
+	enum pin_config_param param;
+	u32 default_value;
+};
+
 int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np, struct pinctrl_map **map,
 		unsigned *reserved_maps, unsigned *num_maps,
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index cc8e1aff0e28..c58b3e11ba8e 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -24,6 +24,7 @@ struct pinctrl_dev;
 struct pinctrl_map;
 struct pinmux_ops;
 struct pinconf_ops;
+struct pin_config_item;
 struct gpio_chip;
 struct device_node;
 
@@ -117,6 +118,9 @@ struct pinctrl_ops {
  * @confops: pin config operations vtable, if you support pin configuration in
  *	your driver
  * @owner: module providing the pin controller, used for refcounting
+ * @num_dt_params: Number of driver-specific DT parameters
+ * @params: List of DT parameters
+ * @conf_items: Information how to print @params in debugfs
  */
 struct pinctrl_desc {
 	const char *name;
@@ -126,6 +130,11 @@ struct pinctrl_desc {
 	const struct pinmux_ops *pmxops;
 	const struct pinconf_ops *confops;
 	struct module *owner;
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
+	unsigned int num_dt_params;
+	const struct pinconf_generic_dt_params *params;
+	const struct pin_config_item *conf_items;
+#endif
 };
 
 /* External interface to pin controller */
-- 
2.2.1.1.gb42cc81

[PATCH v4 2/7] pinctrl: pinconf-generic: Allow driver to specify DT params

[Soren Brinkmann]

Additionally to the generic DT parameters, allow drivers to provide
driver-specific DT parameters to be used with the generic parser
infrastructure.

To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf
option to the core. In order to pass this kind of information, the
related data structures - 'struct pinconf_generic_dt_params',
'pin_config_item' - are moved from pinconf internals to the
pinconf-generic header.

Additionally pinconfg-generic is refactored to not only iterate over the
generic pinconf parameters but also take the parameters into account
that are provided through the driver's 'struct pinctrl_desc'.
In particular 'pinconf_generic_parse_dt_config()' and
'pinconf_generic_dump' helpers are split into two parts each. In order
to have a more generic helper that can be used to process the generic
parameters as well as the driver-specific ones.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
v2:
 - fix typo
 - add missing documentation for @conf_items member in struct
 - rebase to pinctrl/devel: conflict in abx500
 - rename _pinconf_generic_dump() to pinconf_generic_dump_one()
 - removed '_' from _parse_dt_cfg()
 - removed BUG_ONs, error condition is handled in if statements
 - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin
   helpers
   - fixed up corresponding call sites
   - renamed pinconf_generic_dump() to pinconf_generic_dump_pins()
   - added kernel-doc to pinconf_generic_dump_pins()
 - add kernel-doc
 - more verbose commit message
---
 drivers/pinctrl/nomadik/pinctrl-abx500.c |   2 +-
 drivers/pinctrl/pinconf-generic.c        | 182 +++++++++++++++++--------------
 drivers/pinctrl/pinconf.c                |   4 +-
 drivers/pinctrl/pinconf.h                |  22 ++--
 drivers/pinctrl/pinctrl-rockchip.c       |   2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c     |   2 +-
 drivers/pinctrl/pinctrl-tz1090.c         |   2 +-
 drivers/pinctrl/sh-pfc/pinctrl.c         |   2 +-
 include/linux/pinctrl/pinconf-generic.h  |  18 +++
 include/linux/pinctrl/pinctrl.h          |   9 ++
 10 files changed, 141 insertions(+), 104 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index 3d6d97228523..1806b24faa14 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -914,7 +914,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		}
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs);
 	if (nconfigs) {
 		const char *gpio_name;
 		const char *pin;
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 21b3d90ebb2d..e0886665b70a 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -27,17 +27,6 @@
 #include "pinctrl-utils.h"
 
 #ifdef CONFIG_DEBUG_FS
-
-struct pin_config_item {
-	const enum pin_config_param param;
-	const char * const display;
-	const char * const format;
-	bool has_arg;
-};
-
-#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
-				.has_arg = d }
-
 static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
 	PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
@@ -60,22 +49,25 @@ static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
 };
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin)
+static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
+				     struct seq_file *s, const char *gname,
+				     unsigned pin,
+				     const struct pin_config_item *items,
+				     int nitems)
 {
-	const struct pinconf_ops *ops = pctldev->desc->confops;
 	int i;
 
-	if (!ops->is_generic)
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
+	for (i = 0; i < nitems; i++) {
 		unsigned long config;
 		int ret;
 
 		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_get_for_pin(pctldev, pin, &config);
+		config = pinconf_to_config_packed(items[i].param, 0);
+		if (gname)
+			ret = pin_config_group_get(dev_name(pctldev->dev),
+						   gname, &config);
+		else
+			ret = pin_config_get_for_pin(pctldev, pin, &config);
 		/* These are legal errors */
 		if (ret == -EINVAL || ret == -ENOTSUPP)
 			continue;
@@ -85,56 +77,46 @@ void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
 		}
 		/* Space between multiple configs */
 		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
+		seq_puts(s, items[i].display);
 		/* Print unit if available */
-		if (conf_items[i].has_arg) {
+		if (items[i].has_arg) {
 			seq_printf(s, " (%u",
 				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
+			if (items[i].format)
+				seq_printf(s, " %s)", items[i].format);
 			else
 				seq_puts(s, ")");
 		}
 	}
 }
 
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname)
+/**
+ * pinconf_generic_dump_pins - Print information about pin or group of pins
+ * @pctldev:	Pincontrol device
+ * @s:		File to print to
+ * @gname:	Group name specifying pins
+ * @pin:	Pin number specyfying pin
+ *
+ * Print the pinconf configuration for the requested pin(s) to @s. Pins can be
+ * specified either by pin using @pin or by group using @gname. Only one needs
+ * to be specified the other can be NULL/0.
+ */
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
+			       const char *gname, unsigned pin)
 {
 	const struct pinconf_ops *ops = pctldev->desc->confops;
-	int i;
 
 	if (!ops->is_generic)
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
-		unsigned long config;
-		int ret;
-
-		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_group_get(dev_name(pctldev->dev), gname,
-					   &config);
-		/* These are legal errors */
-		if (ret == -EINVAL || ret == -ENOTSUPP)
-			continue;
-		if (ret) {
-			seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
-			continue;
-		}
-		/* Space between multiple configs */
-		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
-		/* Print unit if available */
-		if (conf_items[i].has_arg) {
-			seq_printf(s, " (%u",
-				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
-			else
-				seq_puts(s, ")");
-		}
-	}
+	/* generic parameters */
+	pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
+				 ARRAY_SIZE(conf_items));
+	/* driver-specific parameters */
+	if (pctldev->desc->num_dt_params && pctldev->desc->conf_items)
+		pinconf_generic_dump_one(pctldev, s, gname, pin,
+					 pctldev->desc->conf_items,
+					 pctldev->desc->num_dt_params);
 }
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
@@ -148,17 +130,21 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 		seq_printf(s, "%s: 0x%x", conf_items[i].display,
 			   pinconf_to_config_argument(config));
 	}
+
+	if (!pctldev->desc->num_dt_params || !pctldev->desc->conf_items)
+		return;
+
+	for (i = 0; i < pctldev->desc->num_dt_params; i++) {
+		if (pinconf_to_config_param(config) != pctldev->desc->conf_items[i].param)
+			continue;
+		seq_printf(s, "%s: 0x%x", pctldev->desc->conf_items[i].display,
+			   pinconf_to_config_argument(config));
+	}
 }
 EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
 #endif
 
 #ifdef CONFIG_OF
-struct pinconf_generic_dt_params {
-	const char * const property;
-	enum pin_config_param param;
-	u32 default_value;
-};
-
 static const struct pinconf_generic_dt_params dt_params[] = {
 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
 	{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
@@ -184,6 +170,47 @@ static const struct pinconf_generic_dt_params dt_params[] = {
 };
 
 /**
+ * parse_dt_cfg - Parse DT pinconf parameters
+ * @np:	DT node
+ * @params:	Array of describing DT parameters
+ * @count:	Number of entries in @params
+ * @cfg:	Array of parsed config options
+ * @ncfg:	Number of entries in @cfg
+ *
+ * Parse the config options described in @params from @np and puts the result
+ * in @cfg. @cfg does not need to be empty, entries are added beggining at
+ * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg
+ * needs to have enough memory allocated to hold all possible entries.
+ */
+static void parse_dt_cfg(struct device_node *np,
+			 const struct pinconf_generic_dt_params *params,
+			 unsigned int count, unsigned long *cfg,
+			 unsigned int *ncfg)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		u32 val;
+		int ret;
+		const struct pinconf_generic_dt_params *par = &params[i];
+
+		ret = of_property_read_u32(np, par->property, &val);
+
+		/* property not found */
+		if (ret == -EINVAL)
+			continue;
+
+		/* use default value, when no value is specified */
+		if (ret)
+			val = par->default_value;
+
+		pr_debug("found %s with value %u\n", par->property, val);
+		cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
+		(*ncfg)++;
+	}
+}
+
+/**
  * pinconf_generic_parse_dt_config()
  * parse the config properties into generic pinconfig values.
  * @np: node containing the pinconfig properties
@@ -191,39 +218,29 @@ static const struct pinconf_generic_dt_params dt_params[] = {
  * @nconfigs: umber of configurations
  */
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs)
 {
 	unsigned long *cfg;
-	unsigned int ncfg = 0;
+	unsigned int max_cfg, ncfg = 0;
 	int ret;
-	int i;
-	u32 val;
 
 	if (!np)
 		return -EINVAL;
 
 	/* allocate a temporary array big enough to hold one of each option */
-	cfg = kzalloc(sizeof(*cfg) * ARRAY_SIZE(dt_params), GFP_KERNEL);
+	max_cfg = ARRAY_SIZE(dt_params);
+	if (pctldev)
+		max_cfg += pctldev->desc->num_dt_params;
+	cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
 		return -ENOMEM;
 
-	for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
-		const struct pinconf_generic_dt_params *par = &dt_params[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret == -EINVAL)
-			continue;
-
-		/* use default value, when no value is specified */
-		if (ret)
-			val = par->default_value;
-
-		pr_debug("found %s with value %u\n", par->property, val);
-		cfg[ncfg] = pinconf_to_config_packed(par->param, val);
-		ncfg++;
-	}
+	parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
+	if (pctldev && pctldev->desc->num_dt_params && pctldev->desc->params)
+		parse_dt_cfg(np, pctldev->desc->params,
+			      pctldev->desc->num_dt_params, cfg, &ncfg);
 
 	ret = 0;
 
@@ -274,7 +291,8 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
 	if (ret < 0) {
 		dev_err(dev, "could not parse node property\n");
 		return ret;
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 8bfa0643e5dc..1fc09dc20199 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -288,7 +288,7 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_pin(pctldev, s, pin);
+	pinconf_generic_dump_pins(pctldev, s, NULL, pin);
 	if (ops && ops->pin_config_dbg_show)
 		ops->pin_config_dbg_show(pctldev, s, pin);
 }
@@ -333,7 +333,7 @@ static void pinconf_dump_group(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_group(pctldev, s, gname);
+	pinconf_generic_dump_pins(pctldev, s, gname, 0);
 	if (ops && ops->pin_config_group_dbg_show)
 		ops->pin_config_group_dbg_show(pctldev, s, selector);
 }
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index a4a5417e1413..55c75780b3b2 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -92,26 +92,17 @@ static inline void pinconf_init_device_debugfs(struct dentry *devroot,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin);
-
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname);
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+			       struct seq_file *s, const char *gname,
+			       unsigned pin);
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 				 struct seq_file *s, unsigned long config);
 #else
 
-static inline void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-					    struct seq_file *s,
-					    unsigned pin)
-{
-	return;
-}
-
-static inline void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-					      struct seq_file *s,
-					      const char *gname)
+static inline void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+					     struct seq_file *s,
+					     const char *gname, unsigned pin)
 {
 	return;
 }
@@ -126,6 +117,7 @@ static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs);
 #endif
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index ba74f0aa60c7..7625f333ab07 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1140,7 +1140,7 @@ static int rockchip_pinctrl_parse_groups(struct device_node *np,
 			return -EINVAL;
 
 		np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
-		ret = pinconf_generic_parse_dt_config(np_config,
+		ret = pinconf_generic_parse_dt_config(np_config, NULL,
 				&grp->data[j].configs, &grp->data[j].nconfigs);
 		if (ret)
 			return ret;
diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c
index 146e48a9b839..fab6aafa6a9f 100644
--- a/drivers/pinctrl/pinctrl-tz1090-pdc.c
+++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c
@@ -415,7 +415,7 @@ static int tz1090_pdc_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c
index df8cb1e5b7b4..8bd73075f9dd 100644
--- a/drivers/pinctrl/pinctrl-tz1090.c
+++ b/drivers/pinctrl/pinctrl-tz1090.c
@@ -1131,7 +1131,7 @@ static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c
index 910deaefa0ac..072e7c62cab7 100644
--- a/drivers/pinctrl/sh-pfc/pinctrl.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl.c
@@ -122,7 +122,7 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np,
 		return ret;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret < 0)
 		return ret;
 
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 83c89f5ab705..342409f7f3ec 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -115,6 +115,18 @@ enum pin_config_param {
 	PIN_CONFIG_END = 0x7FFF,
 };
 
+#ifdef CONFIG_DEBUG_FS
+#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
+				.has_arg = d }
+
+struct pin_config_item {
+	const enum pin_config_param param;
+	const char * const display;
+	const char * const format;
+	bool has_arg;
+};
+#endif /* CONFIG_DEBUG_FS */
+
 /*
  * Helpful configuration macro to be used in tables etc.
  */
@@ -150,6 +162,12 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param
 struct pinctrl_dev;
 struct pinctrl_map;
 
+struct pinconf_generic_dt_params {
+	const char * const property;
+	enum pin_config_param param;
+	u32 default_value;
+};
+
 int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np, struct pinctrl_map **map,
 		unsigned *reserved_maps, unsigned *num_maps,
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index cc8e1aff0e28..c58b3e11ba8e 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -24,6 +24,7 @@ struct pinctrl_dev;
 struct pinctrl_map;
 struct pinmux_ops;
 struct pinconf_ops;
+struct pin_config_item;
 struct gpio_chip;
 struct device_node;
 
@@ -117,6 +118,9 @@ struct pinctrl_ops {
  * @confops: pin config operations vtable, if you support pin configuration in
  *	your driver
  * @owner: module providing the pin controller, used for refcounting
+ * @num_dt_params: Number of driver-specific DT parameters
+ * @params: List of DT parameters
+ * @conf_items: Information how to print @params in debugfs
  */
 struct pinctrl_desc {
 	const char *name;
@@ -126,6 +130,11 @@ struct pinctrl_desc {
 	const struct pinmux_ops *pmxops;
 	const struct pinconf_ops *confops;
 	struct module *owner;
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
+	unsigned int num_dt_params;
+	const struct pinconf_generic_dt_params *params;
+	const struct pin_config_item *conf_items;
+#endif
 };
 
 /* External interface to pin controller */
-- 
2.2.1.1.gb42cc81

[PATCH v4 2/7] pinctrl: pinconf-generic: Allow driver to specify DT params

[Soren Brinkmann]

Additionally to the generic DT parameters, allow drivers to provide
driver-specific DT parameters to be used with the generic parser
infrastructure.

To achieve this 'struct pinctrl_desc' is extended to pass custom pinconf
option to the core. In order to pass this kind of information, the
related data structures - 'struct pinconf_generic_dt_params',
'pin_config_item' - are moved from pinconf internals to the
pinconf-generic header.

Additionally pinconfg-generic is refactored to not only iterate over the
generic pinconf parameters but also take the parameters into account
that are provided through the driver's 'struct pinctrl_desc'.
In particular 'pinconf_generic_parse_dt_config()' and
'pinconf_generic_dump' helpers are split into two parts each. In order
to have a more generic helper that can be used to process the generic
parameters as well as the driver-specific ones.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
v2:
 - fix typo
 - add missing documentation for @conf_items member in struct
 - rebase to pinctrl/devel: conflict in abx500
 - rename _pinconf_generic_dump() to pinconf_generic_dump_one()
 - removed '_' from _parse_dt_cfg()
 - removed BUG_ONs, error condition is handled in if statements
 - removed pinconf_generic_dump_group() & pinconf_generic_dump_pin
   helpers
   - fixed up corresponding call sites
   - renamed pinconf_generic_dump() to pinconf_generic_dump_pins()
   - added kernel-doc to pinconf_generic_dump_pins()
 - add kernel-doc
 - more verbose commit message
---
 drivers/pinctrl/nomadik/pinctrl-abx500.c |   2 +-
 drivers/pinctrl/pinconf-generic.c        | 182 +++++++++++++++++--------------
 drivers/pinctrl/pinconf.c                |   4 +-
 drivers/pinctrl/pinconf.h                |  22 ++--
 drivers/pinctrl/pinctrl-rockchip.c       |   2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c     |   2 +-
 drivers/pinctrl/pinctrl-tz1090.c         |   2 +-
 drivers/pinctrl/sh-pfc/pinctrl.c         |   2 +-
 include/linux/pinctrl/pinconf-generic.h  |  18 +++
 include/linux/pinctrl/pinctrl.h          |   9 ++
 10 files changed, 141 insertions(+), 104 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index 3d6d97228523..1806b24faa14 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -914,7 +914,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		}
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs);
 	if (nconfigs) {
 		const char *gpio_name;
 		const char *pin;
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 21b3d90ebb2d..e0886665b70a 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -27,17 +27,6 @@
 #include "pinctrl-utils.h"
 
 #ifdef CONFIG_DEBUG_FS
-
-struct pin_config_item {
-	const enum pin_config_param param;
-	const char * const display;
-	const char * const format;
-	bool has_arg;
-};
-
-#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
-				.has_arg = d }
-
 static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
 	PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
@@ -60,22 +49,25 @@ static const struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
 };
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin)
+static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
+				     struct seq_file *s, const char *gname,
+				     unsigned pin,
+				     const struct pin_config_item *items,
+				     int nitems)
 {
-	const struct pinconf_ops *ops = pctldev->desc->confops;
 	int i;
 
-	if (!ops->is_generic)
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
+	for (i = 0; i < nitems; i++) {
 		unsigned long config;
 		int ret;
 
 		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_get_for_pin(pctldev, pin, &config);
+		config = pinconf_to_config_packed(items[i].param, 0);
+		if (gname)
+			ret = pin_config_group_get(dev_name(pctldev->dev),
+						   gname, &config);
+		else
+			ret = pin_config_get_for_pin(pctldev, pin, &config);
 		/* These are legal errors */
 		if (ret == -EINVAL || ret == -ENOTSUPP)
 			continue;
@@ -85,56 +77,46 @@ void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
 		}
 		/* Space between multiple configs */
 		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
+		seq_puts(s, items[i].display);
 		/* Print unit if available */
-		if (conf_items[i].has_arg) {
+		if (items[i].has_arg) {
 			seq_printf(s, " (%u",
 				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
+			if (items[i].format)
+				seq_printf(s, " %s)", items[i].format);
 			else
 				seq_puts(s, ")");
 		}
 	}
 }
 
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname)
+/**
+ * pinconf_generic_dump_pins - Print information about pin or group of pins
+ * @pctldev:	Pincontrol device
+ * @s:		File to print to
+ * @gname:	Group name specifying pins
+ * @pin:	Pin number specyfying pin
+ *
+ * Print the pinconf configuration for the requested pin(s) to @s. Pins can be
+ * specified either by pin using @pin or by group using @gname. Only one needs
+ * to be specified the other can be NULL/0.
+ */
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
+			       const char *gname, unsigned pin)
 {
 	const struct pinconf_ops *ops = pctldev->desc->confops;
-	int i;
 
 	if (!ops->is_generic)
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(conf_items); i++) {
-		unsigned long config;
-		int ret;
-
-		/* We want to check out this parameter */
-		config = pinconf_to_config_packed(conf_items[i].param, 0);
-		ret = pin_config_group_get(dev_name(pctldev->dev), gname,
-					   &config);
-		/* These are legal errors */
-		if (ret == -EINVAL || ret == -ENOTSUPP)
-			continue;
-		if (ret) {
-			seq_printf(s, "ERROR READING CONFIG SETTING %d ", i);
-			continue;
-		}
-		/* Space between multiple configs */
-		seq_puts(s, " ");
-		seq_puts(s, conf_items[i].display);
-		/* Print unit if available */
-		if (conf_items[i].has_arg) {
-			seq_printf(s, " (%u",
-				   pinconf_to_config_argument(config));
-			if (conf_items[i].format)
-				seq_printf(s, " %s)", conf_items[i].format);
-			else
-				seq_puts(s, ")");
-		}
-	}
+	/* generic parameters */
+	pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
+				 ARRAY_SIZE(conf_items));
+	/* driver-specific parameters */
+	if (pctldev->desc->num_dt_params && pctldev->desc->conf_items)
+		pinconf_generic_dump_one(pctldev, s, gname, pin,
+					 pctldev->desc->conf_items,
+					 pctldev->desc->num_dt_params);
 }
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
@@ -148,17 +130,21 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 		seq_printf(s, "%s: 0x%x", conf_items[i].display,
 			   pinconf_to_config_argument(config));
 	}
+
+	if (!pctldev->desc->num_dt_params || !pctldev->desc->conf_items)
+		return;
+
+	for (i = 0; i < pctldev->desc->num_dt_params; i++) {
+		if (pinconf_to_config_param(config) != pctldev->desc->conf_items[i].param)
+			continue;
+		seq_printf(s, "%s: 0x%x", pctldev->desc->conf_items[i].display,
+			   pinconf_to_config_argument(config));
+	}
 }
 EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
 #endif
 
 #ifdef CONFIG_OF
-struct pinconf_generic_dt_params {
-	const char * const property;
-	enum pin_config_param param;
-	u32 default_value;
-};
-
 static const struct pinconf_generic_dt_params dt_params[] = {
 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
 	{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
@@ -184,6 +170,47 @@ static const struct pinconf_generic_dt_params dt_params[] = {
 };
 
 /**
+ * parse_dt_cfg - Parse DT pinconf parameters
+ * @np:	DT node
+ * @params:	Array of describing DT parameters
+ * @count:	Number of entries in @params
+ * @cfg:	Array of parsed config options
+ * @ncfg:	Number of entries in @cfg
+ *
+ * Parse the config options described in @params from @np and puts the result
+ * in @cfg. @cfg does not need to be empty, entries are added beggining at
+ * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg
+ * needs to have enough memory allocated to hold all possible entries.
+ */
+static void parse_dt_cfg(struct device_node *np,
+			 const struct pinconf_generic_dt_params *params,
+			 unsigned int count, unsigned long *cfg,
+			 unsigned int *ncfg)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		u32 val;
+		int ret;
+		const struct pinconf_generic_dt_params *par = &params[i];
+
+		ret = of_property_read_u32(np, par->property, &val);
+
+		/* property not found */
+		if (ret == -EINVAL)
+			continue;
+
+		/* use default value, when no value is specified */
+		if (ret)
+			val = par->default_value;
+
+		pr_debug("found %s with value %u\n", par->property, val);
+		cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
+		(*ncfg)++;
+	}
+}
+
+/**
  * pinconf_generic_parse_dt_config()
  * parse the config properties into generic pinconfig values.
  * @np: node containing the pinconfig properties
@@ -191,39 +218,29 @@ static const struct pinconf_generic_dt_params dt_params[] = {
  * @nconfigs: umber of configurations
  */
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs)
 {
 	unsigned long *cfg;
-	unsigned int ncfg = 0;
+	unsigned int max_cfg, ncfg = 0;
 	int ret;
-	int i;
-	u32 val;
 
 	if (!np)
 		return -EINVAL;
 
 	/* allocate a temporary array big enough to hold one of each option */
-	cfg = kzalloc(sizeof(*cfg) * ARRAY_SIZE(dt_params), GFP_KERNEL);
+	max_cfg = ARRAY_SIZE(dt_params);
+	if (pctldev)
+		max_cfg += pctldev->desc->num_dt_params;
+	cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL);
 	if (!cfg)
 		return -ENOMEM;
 
-	for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
-		const struct pinconf_generic_dt_params *par = &dt_params[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret == -EINVAL)
-			continue;
-
-		/* use default value, when no value is specified */
-		if (ret)
-			val = par->default_value;
-
-		pr_debug("found %s with value %u\n", par->property, val);
-		cfg[ncfg] = pinconf_to_config_packed(par->param, val);
-		ncfg++;
-	}
+	parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
+	if (pctldev && pctldev->desc->num_dt_params && pctldev->desc->params)
+		parse_dt_cfg(np, pctldev->desc->params,
+			      pctldev->desc->num_dt_params, cfg, &ncfg);
 
 	ret = 0;
 
@@ -274,7 +291,8 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
 	if (ret < 0) {
 		dev_err(dev, "could not parse node property\n");
 		return ret;
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 8bfa0643e5dc..1fc09dc20199 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -288,7 +288,7 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_pin(pctldev, s, pin);
+	pinconf_generic_dump_pins(pctldev, s, NULL, pin);
 	if (ops && ops->pin_config_dbg_show)
 		ops->pin_config_dbg_show(pctldev, s, pin);
 }
@@ -333,7 +333,7 @@ static void pinconf_dump_group(struct pinctrl_dev *pctldev,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	/* no-op when not using generic pin config */
-	pinconf_generic_dump_group(pctldev, s, gname);
+	pinconf_generic_dump_pins(pctldev, s, gname, 0);
 	if (ops && ops->pin_config_group_dbg_show)
 		ops->pin_config_group_dbg_show(pctldev, s, selector);
 }
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index a4a5417e1413..55c75780b3b2 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -92,26 +92,17 @@ static inline void pinconf_init_device_debugfs(struct dentry *devroot,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
 
-void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, unsigned pin);
-
-void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-			      struct seq_file *s, const char *gname);
+void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+			       struct seq_file *s, const char *gname,
+			       unsigned pin);
 
 void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 				 struct seq_file *s, unsigned long config);
 #else
 
-static inline void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
-					    struct seq_file *s,
-					    unsigned pin)
-{
-	return;
-}
-
-static inline void pinconf_generic_dump_group(struct pinctrl_dev *pctldev,
-					      struct seq_file *s,
-					      const char *gname)
+static inline void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev,
+					     struct seq_file *s,
+					     const char *gname, unsigned pin)
 {
 	return;
 }
@@ -126,6 +117,7 @@ static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 
 #if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
 int pinconf_generic_parse_dt_config(struct device_node *np,
+				    struct pinctrl_dev *pctldev,
 				    unsigned long **configs,
 				    unsigned int *nconfigs);
 #endif
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index ba74f0aa60c7..7625f333ab07 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1140,7 +1140,7 @@ static int rockchip_pinctrl_parse_groups(struct device_node *np,
 			return -EINVAL;
 
 		np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
-		ret = pinconf_generic_parse_dt_config(np_config,
+		ret = pinconf_generic_parse_dt_config(np_config, NULL,
 				&grp->data[j].configs, &grp->data[j].nconfigs);
 		if (ret)
 			return ret;
diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c
index 146e48a9b839..fab6aafa6a9f 100644
--- a/drivers/pinctrl/pinctrl-tz1090-pdc.c
+++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c
@@ -415,7 +415,7 @@ static int tz1090_pdc_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c
index df8cb1e5b7b4..8bd73075f9dd 100644
--- a/drivers/pinctrl/pinctrl-tz1090.c
+++ b/drivers/pinctrl/pinctrl-tz1090.c
@@ -1131,7 +1131,7 @@ static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev,
 		function = NULL;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret)
 		return ret;
 
diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c
index 910deaefa0ac..072e7c62cab7 100644
--- a/drivers/pinctrl/sh-pfc/pinctrl.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl.c
@@ -122,7 +122,7 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np,
 		return ret;
 	}
 
-	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs);
 	if (ret < 0)
 		return ret;
 
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 83c89f5ab705..342409f7f3ec 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -115,6 +115,18 @@ enum pin_config_param {
 	PIN_CONFIG_END = 0x7FFF,
 };
 
+#ifdef CONFIG_DEBUG_FS
+#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
+				.has_arg = d }
+
+struct pin_config_item {
+	const enum pin_config_param param;
+	const char * const display;
+	const char * const format;
+	bool has_arg;
+};
+#endif /* CONFIG_DEBUG_FS */
+
 /*
  * Helpful configuration macro to be used in tables etc.
  */
@@ -150,6 +162,12 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param
 struct pinctrl_dev;
 struct pinctrl_map;
 
+struct pinconf_generic_dt_params {
+	const char * const property;
+	enum pin_config_param param;
+	u32 default_value;
+};
+
 int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np, struct pinctrl_map **map,
 		unsigned *reserved_maps, unsigned *num_maps,
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index cc8e1aff0e28..c58b3e11ba8e 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -24,6 +24,7 @@ struct pinctrl_dev;
 struct pinctrl_map;
 struct pinmux_ops;
 struct pinconf_ops;
+struct pin_config_item;
 struct gpio_chip;
 struct device_node;
 
@@ -117,6 +118,9 @@ struct pinctrl_ops {
  * @confops: pin config operations vtable, if you support pin configuration in
  *	your driver
  * @owner: module providing the pin controller, used for refcounting
+ * @num_dt_params: Number of driver-specific DT parameters
+ * @params: List of DT parameters
+ * @conf_items: Information how to print @params in debugfs
  */
 struct pinctrl_desc {
 	const char *name;
@@ -126,6 +130,11 @@ struct pinctrl_desc {
 	const struct pinmux_ops *pmxops;
 	const struct pinconf_ops *confops;
 	struct module *owner;
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
+	unsigned int num_dt_params;
+	const struct pinconf_generic_dt_params *params;
+	const struct pin_config_item *conf_items;
+#endif
 };
 
 /* External interface to pin controller */
-- 
2.2.1.1.gb42cc81

[PATCH v4 3/7] pinctrl: zynq: Document DT binding

[Soren Brinkmann]

Add documentation for the devicetree binding for the Zynq pincontroller.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v1:
 - fix typo
 - add USB related documentation
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - update documentation to enforce strict separation of pinmux
   and pinconf nodes
   - update example accordingly
---
 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         | 104 +++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
new file mode 100644
index 000000000000..b7b55a964f65
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -0,0 +1,104 @@
+	Binding for Xilinx Zynq Pinctrl
+
+Required properties:
+- compatible: "xlnx,zynq-pinctrl"
+- syscon: phandle to SLCR
+- reg: Offset and length of pinctrl space in SLCR
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Zynq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+Each configuration node can consist of multiple nodes describing the pinmux and
+pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required properties for pinmux nodes are:
+ - groups: A list of pinmux groups.
+ - function: The name of a pinmux function to activate for the specified set
+   of groups.
+
+Required properties for configuration nodes:
+One of:
+ - pins: a list of pin names
+ - groups: A list of pinmux groups.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+ groups, function
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+ groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
+ low-power-disable, low-power-enable
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
+ respectively.
+
+ Valid values for groups are:
+   ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
+   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
+   spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+   sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+   sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
+   can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
+   uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
+   ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
+   gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
+
+ Valid values for pins are:
+   MIO0 - MIO53
+
+ Valid values for function are:
+   ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
+   spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+   sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
+   i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
+
+The following driver-specific properties as defined here are valid to specify in
+a pin configuration subnode:
+ - io-standard: Configure the pin to use the selected IO standard according to
+   this mapping:
+    1: LVCMOS18
+    2: LVCMOS25
+    3: LVCMOS33
+    4: HSTL
+
+Example:
+	pinctrl0: pinctrl@700 {
+		compatible = "xlnx,pinctrl-zynq";
+		reg = <0x700 0x200>;
+		syscon = <&slcr>;
+
+		pinctrl_uart1_default: uart1-default {
+			mux {
+				groups = "uart1_10_grp";
+				function = "uart1";
+			};
+
+			conf {
+				groups = "uart1_10_grp";
+				slew-rate = <0>;
+				io-standard = <1>;
+			};
+
+			conf-rx {
+				pins = "MIO49";
+				bias-high-impedance;
+			};
+
+			conf-tx {
+				pins = "MIO48";
+				bias-disable;
+			};
+		};
+	};
-- 
2.2.1.1.gb42cc81

[PATCH v4 3/7] pinctrl: zynq: Document DT binding

[Soren Brinkmann]

Add documentation for the devicetree binding for the Zynq pincontroller.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since v1:
 - fix typo
 - add USB related documentation
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - update documentation to enforce strict separation of pinmux
   and pinconf nodes
   - update example accordingly
---
 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         | 104 +++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
new file mode 100644
index 000000000000..b7b55a964f65
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -0,0 +1,104 @@
+	Binding for Xilinx Zynq Pinctrl
+
+Required properties:
+- compatible: "xlnx,zynq-pinctrl"
+- syscon: phandle to SLCR
+- reg: Offset and length of pinctrl space in SLCR
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Zynq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+Each configuration node can consist of multiple nodes describing the pinmux and
+pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required properties for pinmux nodes are:
+ - groups: A list of pinmux groups.
+ - function: The name of a pinmux function to activate for the specified set
+   of groups.
+
+Required properties for configuration nodes:
+One of:
+ - pins: a list of pin names
+ - groups: A list of pinmux groups.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+ groups, function
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+ groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
+ low-power-disable, low-power-enable
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
+ respectively.
+
+ Valid values for groups are:
+   ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
+   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
+   spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+   sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+   sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
+   can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
+   uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
+   ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
+   gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
+
+ Valid values for pins are:
+   MIO0 - MIO53
+
+ Valid values for function are:
+   ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
+   spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+   sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
+   i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
+
+The following driver-specific properties as defined here are valid to specify in
+a pin configuration subnode:
+ - io-standard: Configure the pin to use the selected IO standard according to
+   this mapping:
+    1: LVCMOS18
+    2: LVCMOS25
+    3: LVCMOS33
+    4: HSTL
+
+Example:
+	pinctrl0: pinctrl at 700 {
+		compatible = "xlnx,pinctrl-zynq";
+		reg = <0x700 0x200>;
+		syscon = <&slcr>;
+
+		pinctrl_uart1_default: uart1-default {
+			mux {
+				groups = "uart1_10_grp";
+				function = "uart1";
+			};
+
+			conf {
+				groups = "uart1_10_grp";
+				slew-rate = <0>;
+				io-standard = <1>;
+			};
+
+			conf-rx {
+				pins = "MIO49";
+				bias-high-impedance;
+			};
+
+			conf-tx {
+				pins = "MIO48";
+				bias-disable;
+			};
+		};
+	};
-- 
2.2.1.1.gb42cc81

[PATCH v4 3/7] pinctrl: zynq: Document DT binding

[Soren Brinkmann]

Add documentation for the devicetree binding for the Zynq pincontroller.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v1:
 - fix typo
 - add USB related documentation
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - update documentation to enforce strict separation of pinmux
   and pinconf nodes
   - update example accordingly
---
 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         | 104 +++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
new file mode 100644
index 000000000000..b7b55a964f65
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -0,0 +1,104 @@
+	Binding for Xilinx Zynq Pinctrl
+
+Required properties:
+- compatible: "xlnx,zynq-pinctrl"
+- syscon: phandle to SLCR
+- reg: Offset and length of pinctrl space in SLCR
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Zynq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+Each configuration node can consist of multiple nodes describing the pinmux and
+pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required properties for pinmux nodes are:
+ - groups: A list of pinmux groups.
+ - function: The name of a pinmux function to activate for the specified set
+   of groups.
+
+Required properties for configuration nodes:
+One of:
+ - pins: a list of pin names
+ - groups: A list of pinmux groups.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+ groups, function
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+ groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
+ low-power-disable, low-power-enable
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
+ respectively.
+
+ Valid values for groups are:
+   ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
+   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
+   spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+   sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+   sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
+   can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
+   uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
+   ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
+   gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
+
+ Valid values for pins are:
+   MIO0 - MIO53
+
+ Valid values for function are:
+   ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
+   spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+   sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
+   i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
+
+The following driver-specific properties as defined here are valid to specify in
+a pin configuration subnode:
+ - io-standard: Configure the pin to use the selected IO standard according to
+   this mapping:
+    1: LVCMOS18
+    2: LVCMOS25
+    3: LVCMOS33
+    4: HSTL
+
+Example:
+	pinctrl0: pinctrl@700 {
+		compatible = "xlnx,pinctrl-zynq";
+		reg = <0x700 0x200>;
+		syscon = <&slcr>;
+
+		pinctrl_uart1_default: uart1-default {
+			mux {
+				groups = "uart1_10_grp";
+				function = "uart1";
+			};
+
+			conf {
+				groups = "uart1_10_grp";
+				slew-rate = <0>;
+				io-standard = <1>;
+			};
+
+			conf-rx {
+				pins = "MIO49";
+				bias-high-impedance;
+			};
+
+			conf-tx {
+				pins = "MIO48";
+				bias-disable;
+			};
+		};
+	};
-- 
2.2.1.1.gb42cc81

[PATCH v4 4/7] pinctrl: Add driver for Zynq

[Soren Brinkmann]

This adds a pin-control driver for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v2:
- driver-specific DT properties are passed to the core in two arrays,
  one for the actual DT parsing one for the debugfs representation.
  Issue a compiler warning when the number of entries is not the same
  for both arrays.

Changes since v1:
 - fix EMIO_SD1_CD pin name
 - add USB to pinmux options

changes since RFCv2:
 - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is
   present in DT but no driver available.
 - add #defines to get rid of magical constants
 - add commas at end of initializers
 - separate changes in mach-zynq in separate patch
 - add driver specific io-standard DT property
 - refactored pinconf set function to not require arguments for
   argument-less properties
 - squash other patches in
   - support for IO-standard property
   - support for low-power mode property
   - migration to pinconf_generic_dt_node_to_map_all()
 - use newly created infrastructure to add pass driver-specific DT
   params to pinconf-generic

changes since RFC:
 - use syscon/regmap to access registers in SLCR space
 - rebase to 3.18: rename enable -> set_mux
 - add kernel-doc
 - support pinconf
   - supported attributes
     - pin-bias: pull up, tristate, disable
     - slew-rate: 0 = slow, 1 = fast; generic pinconf does not display
       argument
---
 drivers/pinctrl/Kconfig        |    8 +
 drivers/pinctrl/Makefile       |    1 +
 drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1185 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d014f22f387a..67c8db927454 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -191,6 +191,14 @@ config PINCTRL_PALMAS
 	  open drain configuration for the Palmas series devices like
 	  TPS65913, TPS80036 etc.
 
+config PINCTRL_ZYNQ
+	bool "Pinctrl driver for Xilinx Zynq"
+	depends on ARCH_ZYNQ
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  This selectes the pinctrl driver for Xilinx Zynq.
+
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c030b3db8034..886357556e87 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
 obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
 obj-y				+= freescale/
diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c
new file mode 100644
index 000000000000..c2fc9035dde9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-zynq.c
@@ -0,0 +1,1176 @@
+/*
+ * Zynq pin controller
+ *
+ *  Copyright (C) 2014 Xilinx
+ *
+ *  Sören Brinkmann <soren.brinkmann@xilinx.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include "pinctrl-utils.h"
+#include "core.h"
+
+#define ZYNQ_NUM_MIOS	54
+
+#define ZYNQ_PCTRL_MIO_MST_TRI0	0x10c
+#define ZYNQ_PCTRL_MIO_MST_TRI1	0x110
+
+#define ZYNQ_PINMUX_MUX_SHIFT	1
+#define ZYNQ_PINMUX_MUX_MASK	(0x7f << ZYNQ_PINMUX_MUX_SHIFT)
+
+/**
+ * struct zynq_pinctrl - driver data
+ * @pctrl:		Pinctrl device
+ * @syscon:		Syscon regmap
+ * @pctrl_offset:	Offset for pinctrl into the @syscon space
+ * @groups:		Pingroups
+ * @ngroupos:		Number of @groups
+ * @funcs:		Pinmux functions
+ * @nfuncs:		Number of @funcs
+ */
+struct zynq_pinctrl {
+	struct pinctrl_dev *pctrl;
+	struct regmap *syscon;
+	u32 pctrl_offset;
+	const struct zynq_pctrl_group *groups;
+	unsigned int ngroups;
+	const struct zynq_pinmux_function *funcs;
+	unsigned int nfuncs;
+};
+
+struct zynq_pctrl_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned npins;
+};
+
+/**
+ * struct zynq_pinmux_function - a pinmux function
+ * @name:	Name of the pinmux function.
+ * @groups:	List of pingroups for this function.
+ * @ngroups:	Number of entries in @groups.
+ * @mux_val:	Selector for this function
+ * @mux:	Offset of function specific mux
+ * @mux_mask:	Mask for function specific selector
+ * @mux_shift:	Shift for function specific selector
+ */
+struct zynq_pinmux_function {
+	const char *name;
+	const char * const *groups;
+	unsigned int ngroups;
+	unsigned int mux_val;
+	u32 mux;
+	u32 mux_mask;
+	u8 mux_shift;
+};
+
+enum zynq_pinmux_functions {
+	ZYNQ_PMUX_can0,
+	ZYNQ_PMUX_can1,
+	ZYNQ_PMUX_ethernet0,
+	ZYNQ_PMUX_ethernet1,
+	ZYNQ_PMUX_gpio0,
+	ZYNQ_PMUX_i2c0,
+	ZYNQ_PMUX_i2c1,
+	ZYNQ_PMUX_mdio0,
+	ZYNQ_PMUX_mdio1,
+	ZYNQ_PMUX_qspi0,
+	ZYNQ_PMUX_qspi1,
+	ZYNQ_PMUX_qspi_fbclk,
+	ZYNQ_PMUX_qspi_cs1,
+	ZYNQ_PMUX_spi0,
+	ZYNQ_PMUX_spi1,
+	ZYNQ_PMUX_sdio0,
+	ZYNQ_PMUX_sdio0_pc,
+	ZYNQ_PMUX_sdio0_cd,
+	ZYNQ_PMUX_sdio0_wp,
+	ZYNQ_PMUX_sdio1,
+	ZYNQ_PMUX_sdio1_pc,
+	ZYNQ_PMUX_sdio1_cd,
+	ZYNQ_PMUX_sdio1_wp,
+	ZYNQ_PMUX_smc0_nor,
+	ZYNQ_PMUX_smc0_nor_cs1,
+	ZYNQ_PMUX_smc0_nor_addr25,
+	ZYNQ_PMUX_smc0_nand,
+	ZYNQ_PMUX_ttc0,
+	ZYNQ_PMUX_ttc1,
+	ZYNQ_PMUX_uart0,
+	ZYNQ_PMUX_uart1,
+	ZYNQ_PMUX_usb0,
+	ZYNQ_PMUX_usb1,
+	ZYNQ_PMUX_swdt0,
+	ZYNQ_PMUX_MAX_FUNC
+};
+
+const struct pinctrl_pin_desc zynq_pins[] = {
+	PINCTRL_PIN(0,  "MIO0"),
+	PINCTRL_PIN(1,  "MIO1"),
+	PINCTRL_PIN(2,  "MIO2"),
+	PINCTRL_PIN(3,  "MIO3"),
+	PINCTRL_PIN(4,  "MIO4"),
+	PINCTRL_PIN(5,  "MIO5"),
+	PINCTRL_PIN(6,  "MIO6"),
+	PINCTRL_PIN(7,  "MIO7"),
+	PINCTRL_PIN(8,  "MIO8"),
+	PINCTRL_PIN(9,  "MIO9"),
+	PINCTRL_PIN(10, "MIO10"),
+	PINCTRL_PIN(11, "MIO11"),
+	PINCTRL_PIN(12, "MIO12"),
+	PINCTRL_PIN(13, "MIO13"),
+	PINCTRL_PIN(14, "MIO14"),
+	PINCTRL_PIN(15, "MIO15"),
+	PINCTRL_PIN(16, "MIO16"),
+	PINCTRL_PIN(17, "MIO17"),
+	PINCTRL_PIN(18, "MIO18"),
+	PINCTRL_PIN(19, "MIO19"),
+	PINCTRL_PIN(20, "MIO20"),
+	PINCTRL_PIN(21, "MIO21"),
+	PINCTRL_PIN(22, "MIO22"),
+	PINCTRL_PIN(23, "MIO23"),
+	PINCTRL_PIN(24, "MIO24"),
+	PINCTRL_PIN(25, "MIO25"),
+	PINCTRL_PIN(26, "MIO26"),
+	PINCTRL_PIN(27, "MIO27"),
+	PINCTRL_PIN(28, "MIO28"),
+	PINCTRL_PIN(29, "MIO29"),
+	PINCTRL_PIN(30, "MIO30"),
+	PINCTRL_PIN(31, "MIO31"),
+	PINCTRL_PIN(32, "MIO32"),
+	PINCTRL_PIN(33, "MIO33"),
+	PINCTRL_PIN(34, "MIO34"),
+	PINCTRL_PIN(35, "MIO35"),
+	PINCTRL_PIN(36, "MIO36"),
+	PINCTRL_PIN(37, "MIO37"),
+	PINCTRL_PIN(38, "MIO38"),
+	PINCTRL_PIN(39, "MIO39"),
+	PINCTRL_PIN(40, "MIO40"),
+	PINCTRL_PIN(41, "MIO41"),
+	PINCTRL_PIN(42, "MIO42"),
+	PINCTRL_PIN(43, "MIO43"),
+	PINCTRL_PIN(44, "MIO44"),
+	PINCTRL_PIN(45, "MIO45"),
+	PINCTRL_PIN(46, "MIO46"),
+	PINCTRL_PIN(47, "MIO47"),
+	PINCTRL_PIN(48, "MIO48"),
+	PINCTRL_PIN(49, "MIO49"),
+	PINCTRL_PIN(50, "MIO50"),
+	PINCTRL_PIN(51, "MIO51"),
+	PINCTRL_PIN(52, "MIO52"),
+	PINCTRL_PIN(53, "MIO53"),
+	PINCTRL_PIN(54, "EMIO_SD0_WP"),
+	PINCTRL_PIN(55, "EMIO_SD0_CD"),
+	PINCTRL_PIN(56, "EMIO_SD1_WP"),
+	PINCTRL_PIN(57, "EMIO_SD1_CD"),
+};
+
+/* pin groups */
+static const unsigned int ethernet0_0_pins[] = {16, 17, 18, 19, 20, 21, 22, 23,
+						24, 25, 26, 27};
+static const unsigned int ethernet1_0_pins[] = {28, 29, 30, 31, 32, 33, 34, 35,
+						36, 37, 38, 39};
+static const unsigned int mdio0_0_pins[] = {52, 53};
+static const unsigned int mdio1_0_pins[] = {52, 53};
+static const unsigned int qspi0_0_pins[] = {1, 2, 3, 4, 5, 6};
+
+static const unsigned int qspi1_0_pins[] = {9, 10, 11, 12, 13};
+static const unsigned int qspi_cs1_pins[] = {0};
+static const unsigned int qspi_fbclk_pins[] = {8};
+static const unsigned int spi0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int spi0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int spi0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int spi1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int spi1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int spi1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int spi1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int sdio0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int sdio0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int sdio1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int sdio1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int sdio1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int sdio1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_emio_wp_pins[] = {54};
+static const unsigned int sdio0_emio_cd_pins[] = {55};
+static const unsigned int sdio1_emio_wp_pins[] = {56};
+static const unsigned int sdio1_emio_cd_pins[] = {57};
+static const unsigned int smc0_nor_pins[] = {0, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13,
+					     15, 16, 17, 18, 19, 20, 21, 22, 23,
+					     24, 25, 26, 27, 28, 29, 30, 31, 32,
+					     33, 34, 35, 36, 37, 38, 39};
+static const unsigned int smc0_nor_cs1_pins[] = {1};
+static const unsigned int smc0_nor_addr25_pins[] = {1};
+static const unsigned int smc0_nand_pins[] = {0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+					      12, 13, 14, 16, 17, 18, 19, 20,
+					      21, 22, 23};
+/* Note: CAN MIO clock inputs are modeled in the clock framework */
+static const unsigned int can0_0_pins[] = {10, 11};
+static const unsigned int can0_1_pins[] = {14, 15};
+static const unsigned int can0_2_pins[] = {18, 19};
+static const unsigned int can0_3_pins[] = {22, 23};
+static const unsigned int can0_4_pins[] = {26, 27};
+static const unsigned int can0_5_pins[] = {30, 31};
+static const unsigned int can0_6_pins[] = {34, 35};
+static const unsigned int can0_7_pins[] = {38, 39};
+static const unsigned int can0_8_pins[] = {42, 43};
+static const unsigned int can0_9_pins[] = {46, 47};
+static const unsigned int can0_10_pins[] = {50, 51};
+static const unsigned int can1_0_pins[] = {8, 9};
+static const unsigned int can1_1_pins[] = {12, 13};
+static const unsigned int can1_2_pins[] = {16, 17};
+static const unsigned int can1_3_pins[] = {20, 21};
+static const unsigned int can1_4_pins[] = {24, 25};
+static const unsigned int can1_5_pins[] = {28, 29};
+static const unsigned int can1_6_pins[] = {32, 33};
+static const unsigned int can1_7_pins[] = {36, 37};
+static const unsigned int can1_8_pins[] = {40, 41};
+static const unsigned int can1_9_pins[] = {44, 45};
+static const unsigned int can1_10_pins[] = {48, 49};
+static const unsigned int can1_11_pins[] = {52, 53};
+static const unsigned int uart0_0_pins[] = {10, 11};
+static const unsigned int uart0_1_pins[] = {14, 15};
+static const unsigned int uart0_2_pins[] = {18, 19};
+static const unsigned int uart0_3_pins[] = {22, 23};
+static const unsigned int uart0_4_pins[] = {26, 27};
+static const unsigned int uart0_5_pins[] = {30, 31};
+static const unsigned int uart0_6_pins[] = {34, 35};
+static const unsigned int uart0_7_pins[] = {38, 39};
+static const unsigned int uart0_8_pins[] = {42, 43};
+static const unsigned int uart0_9_pins[] = {46, 47};
+static const unsigned int uart0_10_pins[] = {50, 51};
+static const unsigned int uart1_0_pins[] = {8, 9};
+static const unsigned int uart1_1_pins[] = {12, 13};
+static const unsigned int uart1_2_pins[] = {16, 17};
+static const unsigned int uart1_3_pins[] = {20, 21};
+static const unsigned int uart1_4_pins[] = {24, 25};
+static const unsigned int uart1_5_pins[] = {28, 29};
+static const unsigned int uart1_6_pins[] = {32, 33};
+static const unsigned int uart1_7_pins[] = {36, 37};
+static const unsigned int uart1_8_pins[] = {40, 41};
+static const unsigned int uart1_9_pins[] = {44, 45};
+static const unsigned int uart1_10_pins[] = {48, 49};
+static const unsigned int uart1_11_pins[] = {52, 53};
+static const unsigned int i2c0_0_pins[] = {10, 11};
+static const unsigned int i2c0_1_pins[] = {14, 15};
+static const unsigned int i2c0_2_pins[] = {18, 19};
+static const unsigned int i2c0_3_pins[] = {22, 23};
+static const unsigned int i2c0_4_pins[] = {26, 27};
+static const unsigned int i2c0_5_pins[] = {30, 31};
+static const unsigned int i2c0_6_pins[] = {34, 35};
+static const unsigned int i2c0_7_pins[] = {38, 39};
+static const unsigned int i2c0_8_pins[] = {42, 43};
+static const unsigned int i2c0_9_pins[] = {46, 47};
+static const unsigned int i2c0_10_pins[] = {50, 51};
+static const unsigned int i2c1_0_pins[] = {12, 13};
+static const unsigned int i2c1_1_pins[] = {16, 17};
+static const unsigned int i2c1_2_pins[] = {20, 21};
+static const unsigned int i2c1_3_pins[] = {24, 25};
+static const unsigned int i2c1_4_pins[] = {28, 29};
+static const unsigned int i2c1_5_pins[] = {32, 33};
+static const unsigned int i2c1_6_pins[] = {36, 37};
+static const unsigned int i2c1_7_pins[] = {40, 41};
+static const unsigned int i2c1_8_pins[] = {44, 45};
+static const unsigned int i2c1_9_pins[] = {48, 49};
+static const unsigned int i2c1_10_pins[] = {52, 53};
+static const unsigned int ttc0_0_pins[] = {18, 19};
+static const unsigned int ttc0_1_pins[] = {30, 31};
+static const unsigned int ttc0_2_pins[] = {42, 43};
+static const unsigned int ttc1_0_pins[] = {16, 17};
+static const unsigned int ttc1_1_pins[] = {28, 29};
+static const unsigned int ttc1_2_pins[] = {40, 41};
+static const unsigned int swdt0_0_pins[] = {14, 15};
+static const unsigned int swdt0_1_pins[] = {26, 27};
+static const unsigned int swdt0_2_pins[] = {38, 39};
+static const unsigned int swdt0_3_pins[] = {50, 51};
+static const unsigned int swdt0_4_pins[] = {52, 53};
+static const unsigned int gpio0_0_pins[] = {0};
+static const unsigned int gpio0_1_pins[] = {1};
+static const unsigned int gpio0_2_pins[] = {2};
+static const unsigned int gpio0_3_pins[] = {3};
+static const unsigned int gpio0_4_pins[] = {4};
+static const unsigned int gpio0_5_pins[] = {5};
+static const unsigned int gpio0_6_pins[] = {6};
+static const unsigned int gpio0_7_pins[] = {7};
+static const unsigned int gpio0_8_pins[] = {8};
+static const unsigned int gpio0_9_pins[] = {9};
+static const unsigned int gpio0_10_pins[] = {10};
+static const unsigned int gpio0_11_pins[] = {11};
+static const unsigned int gpio0_12_pins[] = {12};
+static const unsigned int gpio0_13_pins[] = {13};
+static const unsigned int gpio0_14_pins[] = {14};
+static const unsigned int gpio0_15_pins[] = {15};
+static const unsigned int gpio0_16_pins[] = {16};
+static const unsigned int gpio0_17_pins[] = {17};
+static const unsigned int gpio0_18_pins[] = {18};
+static const unsigned int gpio0_19_pins[] = {19};
+static const unsigned int gpio0_20_pins[] = {20};
+static const unsigned int gpio0_21_pins[] = {21};
+static const unsigned int gpio0_22_pins[] = {22};
+static const unsigned int gpio0_23_pins[] = {23};
+static const unsigned int gpio0_24_pins[] = {24};
+static const unsigned int gpio0_25_pins[] = {25};
+static const unsigned int gpio0_26_pins[] = {26};
+static const unsigned int gpio0_27_pins[] = {27};
+static const unsigned int gpio0_28_pins[] = {28};
+static const unsigned int gpio0_29_pins[] = {29};
+static const unsigned int gpio0_30_pins[] = {30};
+static const unsigned int gpio0_31_pins[] = {31};
+static const unsigned int gpio0_32_pins[] = {32};
+static const unsigned int gpio0_33_pins[] = {33};
+static const unsigned int gpio0_34_pins[] = {34};
+static const unsigned int gpio0_35_pins[] = {35};
+static const unsigned int gpio0_36_pins[] = {36};
+static const unsigned int gpio0_37_pins[] = {37};
+static const unsigned int gpio0_38_pins[] = {38};
+static const unsigned int gpio0_39_pins[] = {39};
+static const unsigned int gpio0_40_pins[] = {40};
+static const unsigned int gpio0_41_pins[] = {41};
+static const unsigned int gpio0_42_pins[] = {42};
+static const unsigned int gpio0_43_pins[] = {43};
+static const unsigned int gpio0_44_pins[] = {44};
+static const unsigned int gpio0_45_pins[] = {45};
+static const unsigned int gpio0_46_pins[] = {46};
+static const unsigned int gpio0_47_pins[] = {47};
+static const unsigned int gpio0_48_pins[] = {48};
+static const unsigned int gpio0_49_pins[] = {49};
+static const unsigned int gpio0_50_pins[] = {50};
+static const unsigned int gpio0_51_pins[] = {51};
+static const unsigned int gpio0_52_pins[] = {52};
+static const unsigned int gpio0_53_pins[] = {53};
+static const unsigned int usb0_0_pins[] = {28, 19, 30, 31, 32, 33, 34, 35, 36,
+					   37, 38, 39};
+static const unsigned int usb1_0_pins[] = {40, 41, 42, 43, 44, 45, 46, 47, 48,
+					   49, 50, 51};
+
+#define DEFINE_ZYNQ_PINCTRL_GRP(nm) \
+	{ \
+		.name = #nm "_grp", \
+		.pins = nm ## _pins, \
+		.npins = ARRAY_SIZE(nm ## _pins), \
+	}
+
+struct zynq_pctrl_group zynq_pctrl_groups[] = {
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_fbclk),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_addr25),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nand),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_12),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_13),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_14),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_15),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_16),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_17),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_18),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_19),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_20),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_21),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_22),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_23),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_24),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_25),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_26),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_27),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_28),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_29),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_30),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_31),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_32),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_33),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_34),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_35),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_36),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_37),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_38),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_39),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_40),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_41),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_42),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_43),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_44),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_45),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_46),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_47),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_48),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_49),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_50),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_51),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_52),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_53),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb1_0),
+};
+
+/* function groups */
+static const char * const ethernet0_groups[] = {"ethernet0_0_grp"};
+static const char * const ethernet1_groups[] = {"ethernet1_0_grp"};
+static const char * const usb0_groups[] = {"usb0_0_grp"};
+static const char * const usb1_groups[] = {"usb1_0_grp"};
+static const char * const mdio0_groups[] = {"mdio0_0_grp"};
+static const char * const mdio1_groups[] = {"mdio1_0_grp"};
+static const char * const qspi0_groups[] = {"qspi0_0_grp"};
+static const char * const qspi1_groups[] = {"qspi0_1_grp"};
+static const char * const qspi_fbclk_groups[] = {"qspi_fbclk_grp"};
+static const char * const qspi_cs1_groups[] = {"qspi_cs1_grp"};
+static const char * const spi0_groups[] = {"spi0_0_grp", "spi0_1_grp",
+					   "spi0_2_grp"};
+static const char * const spi1_groups[] = {"spi1_0_grp", "spi1_1_grp",
+					   "spi1_2_grp", "spi1_3_grp"};
+static const char * const sdio0_groups[] = {"sdio0_0_grp", "sdio0_1_grp",
+					    "sdio0_2_grp"};
+static const char * const sdio1_groups[] = {"sdio1_0_grp", "sdio1_1_grp",
+					    "sdio1_2_grp", "sdio1_3_grp"};
+static const char * const sdio0_pc_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp"};
+static const char * const sdio1_pc_groups[] = {"gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+static const char * const sdio0_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_cd_grp"};
+static const char * const sdio0_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_wp_grp"};
+static const char * const sdio1_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_cd_grp"};
+static const char * const sdio1_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_wp_grp"};
+static const char * const smc0_nor_groups[] = {"smc0_nor"};
+static const char * const smc0_nor_cs1_groups[] = {"smc0_nor_cs1_grp"};
+static const char * const smc0_nor_addr25_groups[] = {"smc0_nor_addr25_grp"};
+static const char * const smc0_nand_groups[] = {"smc0_nand"};
+static const char * const can0_groups[] = {"can0_0_grp", "can0_1_grp",
+		"can0_2_grp", "can0_3_grp", "can0_4_grp", "can0_5_grp",
+		"can0_6_grp", "can0_7_grp", "can0_8_grp", "can0_9_grp",
+		"can0_10_grp"};
+static const char * const can1_groups[] = {"can1_0_grp", "can1_1_grp",
+		"can1_2_grp", "can1_3_grp", "can1_4_grp", "can1_5_grp",
+		"can1_6_grp", "can1_7_grp", "can1_8_grp", "can1_9_grp",
+		"can1_10_grp", "can1_11_grp"};
+static const char * const uart0_groups[] = {"uart0_0_grp", "uart0_1_grp",
+		"uart0_2_grp", "uart0_3_grp", "uart0_4_grp", "uart0_5_grp",
+		"uart0_6_grp", "uart0_7_grp", "uart0_8_grp", "uart0_9_grp",
+		"uart0_10_grp"};
+static const char * const uart1_groups[] = {"uart1_0_grp", "uart1_1_grp",
+		"uart1_2_grp", "uart1_3_grp", "uart1_4_grp", "uart1_5_grp",
+		"uart1_6_grp", "uart1_7_grp", "uart1_8_grp", "uart1_9_grp",
+		"uart1_10_grp", "uart1_11_grp"};
+static const char * const i2c0_groups[] = {"i2c0_0_grp", "i2c0_1_grp",
+		"i2c0_2_grp", "i2c0_3_grp", "i2c0_4_grp", "i2c0_5_grp",
+		"i2c0_6_grp", "i2c0_7_grp", "i2c0_8_grp", "i2c0_9_grp",
+		"i2c0_10_grp"};
+static const char * const i2c1_groups[] = {"i2c1_0_grp", "i2c1_1_grp",
+		"i2c1_2_grp", "i2c1_3_grp", "i2c1_4_grp", "i2c1_5_grp",
+		"i2c1_6_grp", "i2c1_7_grp", "i2c1_8_grp", "i2c1_9_grp",
+		"i2c1_10_grp"};
+static const char * const ttc0_groups[] = {"ttc0_0_grp", "ttc0_1_grp",
+					   "ttc0_2_grp"};
+static const char * const ttc1_groups[] = {"ttc1_0_grp", "ttc1_1_grp",
+					   "ttc1_2_grp"};
+static const char * const swdt0_groups[] = {"swdt0_0_grp", "swdt0_1_grp",
+		"swdt0_2_grp", "swdt0_3_grp", "swdt0_4_grp"};
+static const char * const gpio0_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION(fname, mval)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+	}
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(fname, mval, mux, mask, shift)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+		.mux_mask = mask,			\
+		.mux_shift = shift,			\
+	}
+
+#define ZYNQ_SDIO_WP_SHIFT	0
+#define ZYNQ_SDIO_WP_MASK	(0x3f << ZYNQ_SDIO_WP_SHIFT)
+#define ZYNQ_SDIO_CD_SHIFT	16
+#define ZYNQ_SDIO_CD_MASK	(0x3f << ZYNQ_SDIO_CD_SHIFT)
+
+static const struct zynq_pinmux_function zynq_pmux_functions[] = {
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb0, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb1, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_fbclk, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_cs1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi0, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_wp, 0, 130, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_cd, 0, 130, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_wp, 0, 134, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_cd, 0, 134, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_cs1, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_addr25, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nand, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can0, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can1, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart0, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart1, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c0, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c1, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc0, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc1, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(swdt0, 0x30),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(gpio0, 0),
+};
+
+
+/* pinctrl */
+static int zynq_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->ngroups;
+}
+
+static const char *zynq_pctrl_get_group_name(struct pinctrl_dev *pctldev,
+					     unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->groups[selector].name;
+}
+
+static int zynq_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     const unsigned **pins,
+				     unsigned *num_pins)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = pctrl->groups[selector].pins;
+	*num_pins = pctrl->groups[selector].npins;
+
+	return 0;
+}
+
+static const struct pinctrl_ops zynq_pctrl_ops = {
+	.get_groups_count = zynq_pctrl_get_groups_count,
+	.get_group_name = zynq_pctrl_get_group_name,
+	.get_group_pins = zynq_pctrl_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+/* pinmux */
+static int zynq_pmux_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->nfuncs;
+}
+
+static const char *zynq_pmux_get_function_name(struct pinctrl_dev *pctldev,
+					       unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->funcs[selector].name;
+}
+
+static int zynq_pmux_get_function_groups(struct pinctrl_dev *pctldev,
+					 unsigned selector,
+					 const char * const **groups,
+					 unsigned * const num_groups)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctrl->funcs[selector].groups;
+	*num_groups = pctrl->funcs[selector].ngroups;
+	return 0;
+}
+
+static int zynq_pinmux_set_mux(struct pinctrl_dev *pctldev,
+			       unsigned function,
+			       unsigned group)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[group];
+	const struct zynq_pinmux_function *func = &pctrl->funcs[function];
+
+	/*
+	 * SD WP & CD are special. They have dedicated registers
+	 * to mux them in
+	 */
+	if (function = ZYNQ_PMUX_sdio0_cd || function = ZYNQ_PMUX_sdio0_wp ||
+			function = ZYNQ_PMUX_sdio1_cd ||
+			function = ZYNQ_PMUX_sdio1_wp) {
+		u32 reg;
+
+		ret = regmap_read(pctrl->syscon,
+				  pctrl->pctrl_offset + func->mux, &reg);
+		if (ret)
+			return ret;
+
+		reg &= ~func->mux_mask;
+		reg |= pgrp->pins[0] << func->mux_shift;
+		ret = regmap_write(pctrl->syscon,
+				   pctrl->pctrl_offset + func->mux, reg);
+		if (ret)
+			return ret;
+	} else {
+		for (i = 0; i < pgrp->npins; i++) {
+			unsigned int pin = pgrp->pins[i];
+			u32 reg, addr = pctrl->pctrl_offset + (4 * pin);
+
+			ret = regmap_read(pctrl->syscon, addr, &reg);
+			if (ret)
+				return ret;
+
+			reg &= ~ZYNQ_PINMUX_MUX_MASK;
+			reg |= func->mux_val << ZYNQ_PINMUX_MUX_SHIFT;
+			ret = regmap_write(pctrl->syscon, addr, reg);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops zynq_pinmux_ops = {
+	.get_functions_count = zynq_pmux_get_functions_count,
+	.get_function_name = zynq_pmux_get_function_name,
+	.get_function_groups = zynq_pmux_get_function_groups,
+	.set_mux = zynq_pinmux_set_mux,
+};
+
+/* pinconfig */
+#define ZYNQ_PINCONF_TRISTATE		BIT(0)
+#define ZYNQ_PINCONF_SPEED		BIT(8)
+#define ZYNQ_PINCONF_PULLUP		BIT(12)
+#define ZYNQ_PINCONF_DISABLE_RECVR	BIT(13)
+
+#define ZYNQ_PINCONF_IOTYPE_SHIFT	9
+#define ZYNQ_PINCONF_IOTYPE_MASK	(7 << ZYNQ_PINCONF_IOTYPE_SHIFT)
+
+enum zynq_io_standards {
+	zynq_iostd_min,
+	zynq_iostd_lvcmos18,
+	zynq_iostd_lvcmos25,
+	zynq_iostd_lvcmos33,
+	zynq_iostd_hstl,
+	zynq_iostd_max
+};
+
+/**
+ * enum zynq_pin_config_param - possible pin configuration parameters
+ * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
+ *	this parameter (on a custom format) tells the driver which alternative
+ *	IO standard to use.
+ */
+enum zynq_pin_config_param {
+	PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
+};
+
+static const struct pinconf_generic_dt_params zynq_dt_params[] = {
+	{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
+};
+
+static const struct pin_config_item zynq_conf_items[ARRAY_SIZE(zynq_dt_params)] = {
+	PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
+};
+
+static unsigned int zynq_pinconf_iostd_get(u32 reg)
+{
+	return (reg & ZYNQ_PINCONF_IOTYPE_MASK) >> ZYNQ_PINCONF_IOTYPE_SHIFT;
+}
+
+static int zynq_pinconf_cfg_get(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *config)
+{
+	u32 reg;
+	int ret;
+	unsigned int arg = 0;
+	unsigned int param = pinconf_to_config_param(*config);
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (!(reg & ZYNQ_PINCONF_PULLUP))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		if (!(reg & ZYNQ_PINCONF_TRISTATE))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (reg & ZYNQ_PINCONF_PULLUP || reg & ZYNQ_PINCONF_TRISTATE)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		arg = !!(reg & ZYNQ_PINCONF_SPEED);
+		break;
+	case PIN_CONFIG_LOW_POWER_MODE:
+	{
+		enum zynq_io_standards iostd = zynq_pinconf_iostd_get(reg);
+
+		if (iostd != zynq_iostd_hstl)
+			return -EINVAL;
+		if (!(reg & ZYNQ_PINCONF_DISABLE_RECVR))
+			return -EINVAL;
+		arg = !!(reg & ZYNQ_PINCONF_DISABLE_RECVR);
+		break;
+	}
+	case PIN_CONFIG_IOSTANDARD:
+		arg = zynq_pinconf_iostd_get(reg);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+	return 0;
+}
+
+static int zynq_pinconf_cfg_set(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *configs,
+				unsigned num_configs)
+{
+	int i, ret;
+	u32 reg;
+	u32 pullup = 0;
+	u32 tristate = 0;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	for (i = 0; i < num_configs; i++) {
+		unsigned int param = pinconf_to_config_param(configs[i]);
+		unsigned int arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			pullup = ZYNQ_PINCONF_PULLUP;
+			break;
+		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+			tristate = ZYNQ_PINCONF_TRISTATE;
+			break;
+		case PIN_CONFIG_BIAS_DISABLE:
+			reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+			break;
+		case PIN_CONFIG_SLEW_RATE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_SPEED;
+			else
+				reg &= ~ZYNQ_PINCONF_SPEED;
+
+			break;
+		case PIN_CONFIG_IOSTANDARD:
+			if (arg <= zynq_iostd_min || arg >= zynq_iostd_max) {
+				dev_warn(pctldev->dev,
+					 "unsupported IO standard '%u'\n",
+					 param);
+				break;
+			}
+			reg &= ~ZYNQ_PINCONF_IOTYPE_MASK;
+			reg |= arg << ZYNQ_PINCONF_IOTYPE_SHIFT;
+			break;
+		case PIN_CONFIG_LOW_POWER_MODE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_DISABLE_RECVR;
+			else
+				reg &= ~ZYNQ_PINCONF_DISABLE_RECVR;
+
+			break;
+		default:
+			dev_warn(pctldev->dev,
+				 "unsupported configuration parameter '%u'\n",
+				 param);
+			continue;
+		}
+	}
+
+	if (tristate || pullup) {
+		reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+		reg |= tristate | pullup;
+	}
+
+	ret = regmap_write(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), reg);
+	if (ret)
+		return -EIO;
+
+	return 0;
+}
+
+static int zynq_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  unsigned long *configs,
+				  unsigned num_configs)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[selector];
+
+	for (i = 0; i < pgrp->npins; i++) {
+		ret = zynq_pinconf_cfg_set(pctldev, pgrp->pins[i], configs,
+					   num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops zynq_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = zynq_pinconf_cfg_get,
+	.pin_config_set = zynq_pinconf_cfg_set,
+	.pin_config_group_set = zynq_pinconf_group_set,
+};
+
+static struct pinctrl_desc zynq_desc = {
+	.name = "zynq_pinctrl",
+	.pins = zynq_pins,
+	.npins = ARRAY_SIZE(zynq_pins),
+	.pctlops = &zynq_pctrl_ops,
+	.pmxops = &zynq_pinmux_ops,
+	.confops = &zynq_pinconf_ops,
+	.num_dt_params = ARRAY_SIZE(zynq_dt_params),
+	.params = zynq_dt_params,
+	.conf_items = zynq_conf_items,
+	.owner = THIS_MODULE,
+};
+
+static int zynq_pinctrl_probe(struct platform_device *pdev)
+
+{
+	struct resource *res;
+	struct zynq_pinctrl *pctrl;
+
+	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+	if (!pctrl)
+		return -ENOMEM;
+
+	pctrl->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"syscon");
+	if (IS_ERR(pctrl->syscon)) {
+		dev_err(&pdev->dev, "unable to get syscon\n");
+		return PTR_ERR(pctrl->syscon);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing IO resource\n");
+		return -ENODEV;
+	}
+	pctrl->pctrl_offset = res->start;
+
+	pctrl->groups = zynq_pctrl_groups;
+	pctrl->ngroups = ARRAY_SIZE(zynq_pctrl_groups);
+	pctrl->funcs = zynq_pmux_functions;
+	pctrl->nfuncs = ARRAY_SIZE(zynq_pmux_functions);
+
+	pctrl->pctrl = pinctrl_register(&zynq_desc, &pdev->dev, pctrl);
+	if (!pctrl->pctrl)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pctrl);
+
+	dev_info(&pdev->dev, "zynq pinctrl initialized\n");
+
+	return 0;
+}
+
+int zynq_pinctrl_remove(struct platform_device *pdev)
+{
+	struct zynq_pinctrl *pctrl = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(pctrl->pctrl);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_pinctrl_of_match[] = {
+	{ .compatible = "xlnx,pinctrl-zynq" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zynq_pinctrl_of_match);
+
+static struct platform_driver zynq_pinctrl_driver = {
+	.driver = {
+		.name = "zynq-pinctrl",
+		.of_match_table = zynq_pinctrl_of_match,
+	},
+	.probe = zynq_pinctrl_probe,
+	.remove = zynq_pinctrl_remove,
+};
+
+module_platform_driver(zynq_pinctrl_driver);
+
+MODULE_AUTHOR("Sören Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Zynq pinctrl driver");
+MODULE_LICENSE("GPL");
-- 
2.2.1.1.gb42cc81

[PATCH v4 4/7] pinctrl: Add driver for Zynq

[Soren Brinkmann]

This adds a pin-control driver for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since v2:
- driver-specific DT properties are passed to the core in two arrays,
  one for the actual DT parsing one for the debugfs representation.
  Issue a compiler warning when the number of entries is not the same
  for both arrays.

Changes since v1:
 - fix EMIO_SD1_CD pin name
 - add USB to pinmux options

changes since RFCv2:
 - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is
   present in DT but no driver available.
 - add #defines to get rid of magical constants
 - add commas at end of initializers
 - separate changes in mach-zynq in separate patch
 - add driver specific io-standard DT property
 - refactored pinconf set function to not require arguments for
   argument-less properties
 - squash other patches in
   - support for IO-standard property
   - support for low-power mode property
   - migration to pinconf_generic_dt_node_to_map_all()
 - use newly created infrastructure to add pass driver-specific DT
   params to pinconf-generic

changes since RFC:
 - use syscon/regmap to access registers in SLCR space
 - rebase to 3.18: rename enable -> set_mux
 - add kernel-doc
 - support pinconf
   - supported attributes
     - pin-bias: pull up, tristate, disable
     - slew-rate: 0 == slow, 1 == fast; generic pinconf does not display
       argument
---
 drivers/pinctrl/Kconfig        |    8 +
 drivers/pinctrl/Makefile       |    1 +
 drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1185 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d014f22f387a..67c8db927454 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -191,6 +191,14 @@ config PINCTRL_PALMAS
 	  open drain configuration for the Palmas series devices like
 	  TPS65913, TPS80036 etc.
 
+config PINCTRL_ZYNQ
+	bool "Pinctrl driver for Xilinx Zynq"
+	depends on ARCH_ZYNQ
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  This selectes the pinctrl driver for Xilinx Zynq.
+
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c030b3db8034..886357556e87 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
 obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
 obj-y				+= freescale/
diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c
new file mode 100644
index 000000000000..c2fc9035dde9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-zynq.c
@@ -0,0 +1,1176 @@
+/*
+ * Zynq pin controller
+ *
+ *  Copyright (C) 2014 Xilinx
+ *
+ *  S?ren Brinkmann <soren.brinkmann@xilinx.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include "pinctrl-utils.h"
+#include "core.h"
+
+#define ZYNQ_NUM_MIOS	54
+
+#define ZYNQ_PCTRL_MIO_MST_TRI0	0x10c
+#define ZYNQ_PCTRL_MIO_MST_TRI1	0x110
+
+#define ZYNQ_PINMUX_MUX_SHIFT	1
+#define ZYNQ_PINMUX_MUX_MASK	(0x7f << ZYNQ_PINMUX_MUX_SHIFT)
+
+/**
+ * struct zynq_pinctrl - driver data
+ * @pctrl:		Pinctrl device
+ * @syscon:		Syscon regmap
+ * @pctrl_offset:	Offset for pinctrl into the @syscon space
+ * @groups:		Pingroups
+ * @ngroupos:		Number of @groups
+ * @funcs:		Pinmux functions
+ * @nfuncs:		Number of @funcs
+ */
+struct zynq_pinctrl {
+	struct pinctrl_dev *pctrl;
+	struct regmap *syscon;
+	u32 pctrl_offset;
+	const struct zynq_pctrl_group *groups;
+	unsigned int ngroups;
+	const struct zynq_pinmux_function *funcs;
+	unsigned int nfuncs;
+};
+
+struct zynq_pctrl_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned npins;
+};
+
+/**
+ * struct zynq_pinmux_function - a pinmux function
+ * @name:	Name of the pinmux function.
+ * @groups:	List of pingroups for this function.
+ * @ngroups:	Number of entries in @groups.
+ * @mux_val:	Selector for this function
+ * @mux:	Offset of function specific mux
+ * @mux_mask:	Mask for function specific selector
+ * @mux_shift:	Shift for function specific selector
+ */
+struct zynq_pinmux_function {
+	const char *name;
+	const char * const *groups;
+	unsigned int ngroups;
+	unsigned int mux_val;
+	u32 mux;
+	u32 mux_mask;
+	u8 mux_shift;
+};
+
+enum zynq_pinmux_functions {
+	ZYNQ_PMUX_can0,
+	ZYNQ_PMUX_can1,
+	ZYNQ_PMUX_ethernet0,
+	ZYNQ_PMUX_ethernet1,
+	ZYNQ_PMUX_gpio0,
+	ZYNQ_PMUX_i2c0,
+	ZYNQ_PMUX_i2c1,
+	ZYNQ_PMUX_mdio0,
+	ZYNQ_PMUX_mdio1,
+	ZYNQ_PMUX_qspi0,
+	ZYNQ_PMUX_qspi1,
+	ZYNQ_PMUX_qspi_fbclk,
+	ZYNQ_PMUX_qspi_cs1,
+	ZYNQ_PMUX_spi0,
+	ZYNQ_PMUX_spi1,
+	ZYNQ_PMUX_sdio0,
+	ZYNQ_PMUX_sdio0_pc,
+	ZYNQ_PMUX_sdio0_cd,
+	ZYNQ_PMUX_sdio0_wp,
+	ZYNQ_PMUX_sdio1,
+	ZYNQ_PMUX_sdio1_pc,
+	ZYNQ_PMUX_sdio1_cd,
+	ZYNQ_PMUX_sdio1_wp,
+	ZYNQ_PMUX_smc0_nor,
+	ZYNQ_PMUX_smc0_nor_cs1,
+	ZYNQ_PMUX_smc0_nor_addr25,
+	ZYNQ_PMUX_smc0_nand,
+	ZYNQ_PMUX_ttc0,
+	ZYNQ_PMUX_ttc1,
+	ZYNQ_PMUX_uart0,
+	ZYNQ_PMUX_uart1,
+	ZYNQ_PMUX_usb0,
+	ZYNQ_PMUX_usb1,
+	ZYNQ_PMUX_swdt0,
+	ZYNQ_PMUX_MAX_FUNC
+};
+
+const struct pinctrl_pin_desc zynq_pins[] = {
+	PINCTRL_PIN(0,  "MIO0"),
+	PINCTRL_PIN(1,  "MIO1"),
+	PINCTRL_PIN(2,  "MIO2"),
+	PINCTRL_PIN(3,  "MIO3"),
+	PINCTRL_PIN(4,  "MIO4"),
+	PINCTRL_PIN(5,  "MIO5"),
+	PINCTRL_PIN(6,  "MIO6"),
+	PINCTRL_PIN(7,  "MIO7"),
+	PINCTRL_PIN(8,  "MIO8"),
+	PINCTRL_PIN(9,  "MIO9"),
+	PINCTRL_PIN(10, "MIO10"),
+	PINCTRL_PIN(11, "MIO11"),
+	PINCTRL_PIN(12, "MIO12"),
+	PINCTRL_PIN(13, "MIO13"),
+	PINCTRL_PIN(14, "MIO14"),
+	PINCTRL_PIN(15, "MIO15"),
+	PINCTRL_PIN(16, "MIO16"),
+	PINCTRL_PIN(17, "MIO17"),
+	PINCTRL_PIN(18, "MIO18"),
+	PINCTRL_PIN(19, "MIO19"),
+	PINCTRL_PIN(20, "MIO20"),
+	PINCTRL_PIN(21, "MIO21"),
+	PINCTRL_PIN(22, "MIO22"),
+	PINCTRL_PIN(23, "MIO23"),
+	PINCTRL_PIN(24, "MIO24"),
+	PINCTRL_PIN(25, "MIO25"),
+	PINCTRL_PIN(26, "MIO26"),
+	PINCTRL_PIN(27, "MIO27"),
+	PINCTRL_PIN(28, "MIO28"),
+	PINCTRL_PIN(29, "MIO29"),
+	PINCTRL_PIN(30, "MIO30"),
+	PINCTRL_PIN(31, "MIO31"),
+	PINCTRL_PIN(32, "MIO32"),
+	PINCTRL_PIN(33, "MIO33"),
+	PINCTRL_PIN(34, "MIO34"),
+	PINCTRL_PIN(35, "MIO35"),
+	PINCTRL_PIN(36, "MIO36"),
+	PINCTRL_PIN(37, "MIO37"),
+	PINCTRL_PIN(38, "MIO38"),
+	PINCTRL_PIN(39, "MIO39"),
+	PINCTRL_PIN(40, "MIO40"),
+	PINCTRL_PIN(41, "MIO41"),
+	PINCTRL_PIN(42, "MIO42"),
+	PINCTRL_PIN(43, "MIO43"),
+	PINCTRL_PIN(44, "MIO44"),
+	PINCTRL_PIN(45, "MIO45"),
+	PINCTRL_PIN(46, "MIO46"),
+	PINCTRL_PIN(47, "MIO47"),
+	PINCTRL_PIN(48, "MIO48"),
+	PINCTRL_PIN(49, "MIO49"),
+	PINCTRL_PIN(50, "MIO50"),
+	PINCTRL_PIN(51, "MIO51"),
+	PINCTRL_PIN(52, "MIO52"),
+	PINCTRL_PIN(53, "MIO53"),
+	PINCTRL_PIN(54, "EMIO_SD0_WP"),
+	PINCTRL_PIN(55, "EMIO_SD0_CD"),
+	PINCTRL_PIN(56, "EMIO_SD1_WP"),
+	PINCTRL_PIN(57, "EMIO_SD1_CD"),
+};
+
+/* pin groups */
+static const unsigned int ethernet0_0_pins[] = {16, 17, 18, 19, 20, 21, 22, 23,
+						24, 25, 26, 27};
+static const unsigned int ethernet1_0_pins[] = {28, 29, 30, 31, 32, 33, 34, 35,
+						36, 37, 38, 39};
+static const unsigned int mdio0_0_pins[] = {52, 53};
+static const unsigned int mdio1_0_pins[] = {52, 53};
+static const unsigned int qspi0_0_pins[] = {1, 2, 3, 4, 5, 6};
+
+static const unsigned int qspi1_0_pins[] = {9, 10, 11, 12, 13};
+static const unsigned int qspi_cs1_pins[] = {0};
+static const unsigned int qspi_fbclk_pins[] = {8};
+static const unsigned int spi0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int spi0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int spi0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int spi1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int spi1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int spi1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int spi1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int sdio0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int sdio0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int sdio1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int sdio1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int sdio1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int sdio1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_emio_wp_pins[] = {54};
+static const unsigned int sdio0_emio_cd_pins[] = {55};
+static const unsigned int sdio1_emio_wp_pins[] = {56};
+static const unsigned int sdio1_emio_cd_pins[] = {57};
+static const unsigned int smc0_nor_pins[] = {0, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13,
+					     15, 16, 17, 18, 19, 20, 21, 22, 23,
+					     24, 25, 26, 27, 28, 29, 30, 31, 32,
+					     33, 34, 35, 36, 37, 38, 39};
+static const unsigned int smc0_nor_cs1_pins[] = {1};
+static const unsigned int smc0_nor_addr25_pins[] = {1};
+static const unsigned int smc0_nand_pins[] = {0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+					      12, 13, 14, 16, 17, 18, 19, 20,
+					      21, 22, 23};
+/* Note: CAN MIO clock inputs are modeled in the clock framework */
+static const unsigned int can0_0_pins[] = {10, 11};
+static const unsigned int can0_1_pins[] = {14, 15};
+static const unsigned int can0_2_pins[] = {18, 19};
+static const unsigned int can0_3_pins[] = {22, 23};
+static const unsigned int can0_4_pins[] = {26, 27};
+static const unsigned int can0_5_pins[] = {30, 31};
+static const unsigned int can0_6_pins[] = {34, 35};
+static const unsigned int can0_7_pins[] = {38, 39};
+static const unsigned int can0_8_pins[] = {42, 43};
+static const unsigned int can0_9_pins[] = {46, 47};
+static const unsigned int can0_10_pins[] = {50, 51};
+static const unsigned int can1_0_pins[] = {8, 9};
+static const unsigned int can1_1_pins[] = {12, 13};
+static const unsigned int can1_2_pins[] = {16, 17};
+static const unsigned int can1_3_pins[] = {20, 21};
+static const unsigned int can1_4_pins[] = {24, 25};
+static const unsigned int can1_5_pins[] = {28, 29};
+static const unsigned int can1_6_pins[] = {32, 33};
+static const unsigned int can1_7_pins[] = {36, 37};
+static const unsigned int can1_8_pins[] = {40, 41};
+static const unsigned int can1_9_pins[] = {44, 45};
+static const unsigned int can1_10_pins[] = {48, 49};
+static const unsigned int can1_11_pins[] = {52, 53};
+static const unsigned int uart0_0_pins[] = {10, 11};
+static const unsigned int uart0_1_pins[] = {14, 15};
+static const unsigned int uart0_2_pins[] = {18, 19};
+static const unsigned int uart0_3_pins[] = {22, 23};
+static const unsigned int uart0_4_pins[] = {26, 27};
+static const unsigned int uart0_5_pins[] = {30, 31};
+static const unsigned int uart0_6_pins[] = {34, 35};
+static const unsigned int uart0_7_pins[] = {38, 39};
+static const unsigned int uart0_8_pins[] = {42, 43};
+static const unsigned int uart0_9_pins[] = {46, 47};
+static const unsigned int uart0_10_pins[] = {50, 51};
+static const unsigned int uart1_0_pins[] = {8, 9};
+static const unsigned int uart1_1_pins[] = {12, 13};
+static const unsigned int uart1_2_pins[] = {16, 17};
+static const unsigned int uart1_3_pins[] = {20, 21};
+static const unsigned int uart1_4_pins[] = {24, 25};
+static const unsigned int uart1_5_pins[] = {28, 29};
+static const unsigned int uart1_6_pins[] = {32, 33};
+static const unsigned int uart1_7_pins[] = {36, 37};
+static const unsigned int uart1_8_pins[] = {40, 41};
+static const unsigned int uart1_9_pins[] = {44, 45};
+static const unsigned int uart1_10_pins[] = {48, 49};
+static const unsigned int uart1_11_pins[] = {52, 53};
+static const unsigned int i2c0_0_pins[] = {10, 11};
+static const unsigned int i2c0_1_pins[] = {14, 15};
+static const unsigned int i2c0_2_pins[] = {18, 19};
+static const unsigned int i2c0_3_pins[] = {22, 23};
+static const unsigned int i2c0_4_pins[] = {26, 27};
+static const unsigned int i2c0_5_pins[] = {30, 31};
+static const unsigned int i2c0_6_pins[] = {34, 35};
+static const unsigned int i2c0_7_pins[] = {38, 39};
+static const unsigned int i2c0_8_pins[] = {42, 43};
+static const unsigned int i2c0_9_pins[] = {46, 47};
+static const unsigned int i2c0_10_pins[] = {50, 51};
+static const unsigned int i2c1_0_pins[] = {12, 13};
+static const unsigned int i2c1_1_pins[] = {16, 17};
+static const unsigned int i2c1_2_pins[] = {20, 21};
+static const unsigned int i2c1_3_pins[] = {24, 25};
+static const unsigned int i2c1_4_pins[] = {28, 29};
+static const unsigned int i2c1_5_pins[] = {32, 33};
+static const unsigned int i2c1_6_pins[] = {36, 37};
+static const unsigned int i2c1_7_pins[] = {40, 41};
+static const unsigned int i2c1_8_pins[] = {44, 45};
+static const unsigned int i2c1_9_pins[] = {48, 49};
+static const unsigned int i2c1_10_pins[] = {52, 53};
+static const unsigned int ttc0_0_pins[] = {18, 19};
+static const unsigned int ttc0_1_pins[] = {30, 31};
+static const unsigned int ttc0_2_pins[] = {42, 43};
+static const unsigned int ttc1_0_pins[] = {16, 17};
+static const unsigned int ttc1_1_pins[] = {28, 29};
+static const unsigned int ttc1_2_pins[] = {40, 41};
+static const unsigned int swdt0_0_pins[] = {14, 15};
+static const unsigned int swdt0_1_pins[] = {26, 27};
+static const unsigned int swdt0_2_pins[] = {38, 39};
+static const unsigned int swdt0_3_pins[] = {50, 51};
+static const unsigned int swdt0_4_pins[] = {52, 53};
+static const unsigned int gpio0_0_pins[] = {0};
+static const unsigned int gpio0_1_pins[] = {1};
+static const unsigned int gpio0_2_pins[] = {2};
+static const unsigned int gpio0_3_pins[] = {3};
+static const unsigned int gpio0_4_pins[] = {4};
+static const unsigned int gpio0_5_pins[] = {5};
+static const unsigned int gpio0_6_pins[] = {6};
+static const unsigned int gpio0_7_pins[] = {7};
+static const unsigned int gpio0_8_pins[] = {8};
+static const unsigned int gpio0_9_pins[] = {9};
+static const unsigned int gpio0_10_pins[] = {10};
+static const unsigned int gpio0_11_pins[] = {11};
+static const unsigned int gpio0_12_pins[] = {12};
+static const unsigned int gpio0_13_pins[] = {13};
+static const unsigned int gpio0_14_pins[] = {14};
+static const unsigned int gpio0_15_pins[] = {15};
+static const unsigned int gpio0_16_pins[] = {16};
+static const unsigned int gpio0_17_pins[] = {17};
+static const unsigned int gpio0_18_pins[] = {18};
+static const unsigned int gpio0_19_pins[] = {19};
+static const unsigned int gpio0_20_pins[] = {20};
+static const unsigned int gpio0_21_pins[] = {21};
+static const unsigned int gpio0_22_pins[] = {22};
+static const unsigned int gpio0_23_pins[] = {23};
+static const unsigned int gpio0_24_pins[] = {24};
+static const unsigned int gpio0_25_pins[] = {25};
+static const unsigned int gpio0_26_pins[] = {26};
+static const unsigned int gpio0_27_pins[] = {27};
+static const unsigned int gpio0_28_pins[] = {28};
+static const unsigned int gpio0_29_pins[] = {29};
+static const unsigned int gpio0_30_pins[] = {30};
+static const unsigned int gpio0_31_pins[] = {31};
+static const unsigned int gpio0_32_pins[] = {32};
+static const unsigned int gpio0_33_pins[] = {33};
+static const unsigned int gpio0_34_pins[] = {34};
+static const unsigned int gpio0_35_pins[] = {35};
+static const unsigned int gpio0_36_pins[] = {36};
+static const unsigned int gpio0_37_pins[] = {37};
+static const unsigned int gpio0_38_pins[] = {38};
+static const unsigned int gpio0_39_pins[] = {39};
+static const unsigned int gpio0_40_pins[] = {40};
+static const unsigned int gpio0_41_pins[] = {41};
+static const unsigned int gpio0_42_pins[] = {42};
+static const unsigned int gpio0_43_pins[] = {43};
+static const unsigned int gpio0_44_pins[] = {44};
+static const unsigned int gpio0_45_pins[] = {45};
+static const unsigned int gpio0_46_pins[] = {46};
+static const unsigned int gpio0_47_pins[] = {47};
+static const unsigned int gpio0_48_pins[] = {48};
+static const unsigned int gpio0_49_pins[] = {49};
+static const unsigned int gpio0_50_pins[] = {50};
+static const unsigned int gpio0_51_pins[] = {51};
+static const unsigned int gpio0_52_pins[] = {52};
+static const unsigned int gpio0_53_pins[] = {53};
+static const unsigned int usb0_0_pins[] = {28, 19, 30, 31, 32, 33, 34, 35, 36,
+					   37, 38, 39};
+static const unsigned int usb1_0_pins[] = {40, 41, 42, 43, 44, 45, 46, 47, 48,
+					   49, 50, 51};
+
+#define DEFINE_ZYNQ_PINCTRL_GRP(nm) \
+	{ \
+		.name = #nm "_grp", \
+		.pins = nm ## _pins, \
+		.npins = ARRAY_SIZE(nm ## _pins), \
+	}
+
+struct zynq_pctrl_group zynq_pctrl_groups[] = {
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_fbclk),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_addr25),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nand),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_12),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_13),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_14),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_15),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_16),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_17),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_18),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_19),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_20),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_21),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_22),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_23),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_24),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_25),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_26),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_27),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_28),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_29),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_30),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_31),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_32),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_33),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_34),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_35),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_36),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_37),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_38),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_39),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_40),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_41),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_42),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_43),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_44),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_45),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_46),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_47),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_48),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_49),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_50),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_51),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_52),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_53),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb1_0),
+};
+
+/* function groups */
+static const char * const ethernet0_groups[] = {"ethernet0_0_grp"};
+static const char * const ethernet1_groups[] = {"ethernet1_0_grp"};
+static const char * const usb0_groups[] = {"usb0_0_grp"};
+static const char * const usb1_groups[] = {"usb1_0_grp"};
+static const char * const mdio0_groups[] = {"mdio0_0_grp"};
+static const char * const mdio1_groups[] = {"mdio1_0_grp"};
+static const char * const qspi0_groups[] = {"qspi0_0_grp"};
+static const char * const qspi1_groups[] = {"qspi0_1_grp"};
+static const char * const qspi_fbclk_groups[] = {"qspi_fbclk_grp"};
+static const char * const qspi_cs1_groups[] = {"qspi_cs1_grp"};
+static const char * const spi0_groups[] = {"spi0_0_grp", "spi0_1_grp",
+					   "spi0_2_grp"};
+static const char * const spi1_groups[] = {"spi1_0_grp", "spi1_1_grp",
+					   "spi1_2_grp", "spi1_3_grp"};
+static const char * const sdio0_groups[] = {"sdio0_0_grp", "sdio0_1_grp",
+					    "sdio0_2_grp"};
+static const char * const sdio1_groups[] = {"sdio1_0_grp", "sdio1_1_grp",
+					    "sdio1_2_grp", "sdio1_3_grp"};
+static const char * const sdio0_pc_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp"};
+static const char * const sdio1_pc_groups[] = {"gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+static const char * const sdio0_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_cd_grp"};
+static const char * const sdio0_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_wp_grp"};
+static const char * const sdio1_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_cd_grp"};
+static const char * const sdio1_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_wp_grp"};
+static const char * const smc0_nor_groups[] = {"smc0_nor"};
+static const char * const smc0_nor_cs1_groups[] = {"smc0_nor_cs1_grp"};
+static const char * const smc0_nor_addr25_groups[] = {"smc0_nor_addr25_grp"};
+static const char * const smc0_nand_groups[] = {"smc0_nand"};
+static const char * const can0_groups[] = {"can0_0_grp", "can0_1_grp",
+		"can0_2_grp", "can0_3_grp", "can0_4_grp", "can0_5_grp",
+		"can0_6_grp", "can0_7_grp", "can0_8_grp", "can0_9_grp",
+		"can0_10_grp"};
+static const char * const can1_groups[] = {"can1_0_grp", "can1_1_grp",
+		"can1_2_grp", "can1_3_grp", "can1_4_grp", "can1_5_grp",
+		"can1_6_grp", "can1_7_grp", "can1_8_grp", "can1_9_grp",
+		"can1_10_grp", "can1_11_grp"};
+static const char * const uart0_groups[] = {"uart0_0_grp", "uart0_1_grp",
+		"uart0_2_grp", "uart0_3_grp", "uart0_4_grp", "uart0_5_grp",
+		"uart0_6_grp", "uart0_7_grp", "uart0_8_grp", "uart0_9_grp",
+		"uart0_10_grp"};
+static const char * const uart1_groups[] = {"uart1_0_grp", "uart1_1_grp",
+		"uart1_2_grp", "uart1_3_grp", "uart1_4_grp", "uart1_5_grp",
+		"uart1_6_grp", "uart1_7_grp", "uart1_8_grp", "uart1_9_grp",
+		"uart1_10_grp", "uart1_11_grp"};
+static const char * const i2c0_groups[] = {"i2c0_0_grp", "i2c0_1_grp",
+		"i2c0_2_grp", "i2c0_3_grp", "i2c0_4_grp", "i2c0_5_grp",
+		"i2c0_6_grp", "i2c0_7_grp", "i2c0_8_grp", "i2c0_9_grp",
+		"i2c0_10_grp"};
+static const char * const i2c1_groups[] = {"i2c1_0_grp", "i2c1_1_grp",
+		"i2c1_2_grp", "i2c1_3_grp", "i2c1_4_grp", "i2c1_5_grp",
+		"i2c1_6_grp", "i2c1_7_grp", "i2c1_8_grp", "i2c1_9_grp",
+		"i2c1_10_grp"};
+static const char * const ttc0_groups[] = {"ttc0_0_grp", "ttc0_1_grp",
+					   "ttc0_2_grp"};
+static const char * const ttc1_groups[] = {"ttc1_0_grp", "ttc1_1_grp",
+					   "ttc1_2_grp"};
+static const char * const swdt0_groups[] = {"swdt0_0_grp", "swdt0_1_grp",
+		"swdt0_2_grp", "swdt0_3_grp", "swdt0_4_grp"};
+static const char * const gpio0_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION(fname, mval)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+	}
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(fname, mval, mux, mask, shift)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+		.mux_mask = mask,			\
+		.mux_shift = shift,			\
+	}
+
+#define ZYNQ_SDIO_WP_SHIFT	0
+#define ZYNQ_SDIO_WP_MASK	(0x3f << ZYNQ_SDIO_WP_SHIFT)
+#define ZYNQ_SDIO_CD_SHIFT	16
+#define ZYNQ_SDIO_CD_MASK	(0x3f << ZYNQ_SDIO_CD_SHIFT)
+
+static const struct zynq_pinmux_function zynq_pmux_functions[] = {
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb0, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb1, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_fbclk, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_cs1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi0, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_wp, 0, 130, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_cd, 0, 130, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_wp, 0, 134, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_cd, 0, 134, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_cs1, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_addr25, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nand, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can0, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can1, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart0, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart1, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c0, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c1, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc0, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc1, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(swdt0, 0x30),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(gpio0, 0),
+};
+
+
+/* pinctrl */
+static int zynq_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->ngroups;
+}
+
+static const char *zynq_pctrl_get_group_name(struct pinctrl_dev *pctldev,
+					     unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->groups[selector].name;
+}
+
+static int zynq_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     const unsigned **pins,
+				     unsigned *num_pins)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = pctrl->groups[selector].pins;
+	*num_pins = pctrl->groups[selector].npins;
+
+	return 0;
+}
+
+static const struct pinctrl_ops zynq_pctrl_ops = {
+	.get_groups_count = zynq_pctrl_get_groups_count,
+	.get_group_name = zynq_pctrl_get_group_name,
+	.get_group_pins = zynq_pctrl_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+/* pinmux */
+static int zynq_pmux_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->nfuncs;
+}
+
+static const char *zynq_pmux_get_function_name(struct pinctrl_dev *pctldev,
+					       unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->funcs[selector].name;
+}
+
+static int zynq_pmux_get_function_groups(struct pinctrl_dev *pctldev,
+					 unsigned selector,
+					 const char * const **groups,
+					 unsigned * const num_groups)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctrl->funcs[selector].groups;
+	*num_groups = pctrl->funcs[selector].ngroups;
+	return 0;
+}
+
+static int zynq_pinmux_set_mux(struct pinctrl_dev *pctldev,
+			       unsigned function,
+			       unsigned group)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[group];
+	const struct zynq_pinmux_function *func = &pctrl->funcs[function];
+
+	/*
+	 * SD WP & CD are special. They have dedicated registers
+	 * to mux them in
+	 */
+	if (function == ZYNQ_PMUX_sdio0_cd || function == ZYNQ_PMUX_sdio0_wp ||
+			function == ZYNQ_PMUX_sdio1_cd ||
+			function == ZYNQ_PMUX_sdio1_wp) {
+		u32 reg;
+
+		ret = regmap_read(pctrl->syscon,
+				  pctrl->pctrl_offset + func->mux, &reg);
+		if (ret)
+			return ret;
+
+		reg &= ~func->mux_mask;
+		reg |= pgrp->pins[0] << func->mux_shift;
+		ret = regmap_write(pctrl->syscon,
+				   pctrl->pctrl_offset + func->mux, reg);
+		if (ret)
+			return ret;
+	} else {
+		for (i = 0; i < pgrp->npins; i++) {
+			unsigned int pin = pgrp->pins[i];
+			u32 reg, addr = pctrl->pctrl_offset + (4 * pin);
+
+			ret = regmap_read(pctrl->syscon, addr, &reg);
+			if (ret)
+				return ret;
+
+			reg &= ~ZYNQ_PINMUX_MUX_MASK;
+			reg |= func->mux_val << ZYNQ_PINMUX_MUX_SHIFT;
+			ret = regmap_write(pctrl->syscon, addr, reg);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops zynq_pinmux_ops = {
+	.get_functions_count = zynq_pmux_get_functions_count,
+	.get_function_name = zynq_pmux_get_function_name,
+	.get_function_groups = zynq_pmux_get_function_groups,
+	.set_mux = zynq_pinmux_set_mux,
+};
+
+/* pinconfig */
+#define ZYNQ_PINCONF_TRISTATE		BIT(0)
+#define ZYNQ_PINCONF_SPEED		BIT(8)
+#define ZYNQ_PINCONF_PULLUP		BIT(12)
+#define ZYNQ_PINCONF_DISABLE_RECVR	BIT(13)
+
+#define ZYNQ_PINCONF_IOTYPE_SHIFT	9
+#define ZYNQ_PINCONF_IOTYPE_MASK	(7 << ZYNQ_PINCONF_IOTYPE_SHIFT)
+
+enum zynq_io_standards {
+	zynq_iostd_min,
+	zynq_iostd_lvcmos18,
+	zynq_iostd_lvcmos25,
+	zynq_iostd_lvcmos33,
+	zynq_iostd_hstl,
+	zynq_iostd_max
+};
+
+/**
+ * enum zynq_pin_config_param - possible pin configuration parameters
+ * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
+ *	this parameter (on a custom format) tells the driver which alternative
+ *	IO standard to use.
+ */
+enum zynq_pin_config_param {
+	PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
+};
+
+static const struct pinconf_generic_dt_params zynq_dt_params[] = {
+	{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
+};
+
+static const struct pin_config_item zynq_conf_items[ARRAY_SIZE(zynq_dt_params)] = {
+	PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
+};
+
+static unsigned int zynq_pinconf_iostd_get(u32 reg)
+{
+	return (reg & ZYNQ_PINCONF_IOTYPE_MASK) >> ZYNQ_PINCONF_IOTYPE_SHIFT;
+}
+
+static int zynq_pinconf_cfg_get(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *config)
+{
+	u32 reg;
+	int ret;
+	unsigned int arg = 0;
+	unsigned int param = pinconf_to_config_param(*config);
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (!(reg & ZYNQ_PINCONF_PULLUP))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		if (!(reg & ZYNQ_PINCONF_TRISTATE))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (reg & ZYNQ_PINCONF_PULLUP || reg & ZYNQ_PINCONF_TRISTATE)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		arg = !!(reg & ZYNQ_PINCONF_SPEED);
+		break;
+	case PIN_CONFIG_LOW_POWER_MODE:
+	{
+		enum zynq_io_standards iostd = zynq_pinconf_iostd_get(reg);
+
+		if (iostd != zynq_iostd_hstl)
+			return -EINVAL;
+		if (!(reg & ZYNQ_PINCONF_DISABLE_RECVR))
+			return -EINVAL;
+		arg = !!(reg & ZYNQ_PINCONF_DISABLE_RECVR);
+		break;
+	}
+	case PIN_CONFIG_IOSTANDARD:
+		arg = zynq_pinconf_iostd_get(reg);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+	return 0;
+}
+
+static int zynq_pinconf_cfg_set(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *configs,
+				unsigned num_configs)
+{
+	int i, ret;
+	u32 reg;
+	u32 pullup = 0;
+	u32 tristate = 0;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	for (i = 0; i < num_configs; i++) {
+		unsigned int param = pinconf_to_config_param(configs[i]);
+		unsigned int arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			pullup = ZYNQ_PINCONF_PULLUP;
+			break;
+		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+			tristate = ZYNQ_PINCONF_TRISTATE;
+			break;
+		case PIN_CONFIG_BIAS_DISABLE:
+			reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+			break;
+		case PIN_CONFIG_SLEW_RATE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_SPEED;
+			else
+				reg &= ~ZYNQ_PINCONF_SPEED;
+
+			break;
+		case PIN_CONFIG_IOSTANDARD:
+			if (arg <= zynq_iostd_min || arg >= zynq_iostd_max) {
+				dev_warn(pctldev->dev,
+					 "unsupported IO standard '%u'\n",
+					 param);
+				break;
+			}
+			reg &= ~ZYNQ_PINCONF_IOTYPE_MASK;
+			reg |= arg << ZYNQ_PINCONF_IOTYPE_SHIFT;
+			break;
+		case PIN_CONFIG_LOW_POWER_MODE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_DISABLE_RECVR;
+			else
+				reg &= ~ZYNQ_PINCONF_DISABLE_RECVR;
+
+			break;
+		default:
+			dev_warn(pctldev->dev,
+				 "unsupported configuration parameter '%u'\n",
+				 param);
+			continue;
+		}
+	}
+
+	if (tristate || pullup) {
+		reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+		reg |= tristate | pullup;
+	}
+
+	ret = regmap_write(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), reg);
+	if (ret)
+		return -EIO;
+
+	return 0;
+}
+
+static int zynq_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  unsigned long *configs,
+				  unsigned num_configs)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[selector];
+
+	for (i = 0; i < pgrp->npins; i++) {
+		ret = zynq_pinconf_cfg_set(pctldev, pgrp->pins[i], configs,
+					   num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops zynq_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = zynq_pinconf_cfg_get,
+	.pin_config_set = zynq_pinconf_cfg_set,
+	.pin_config_group_set = zynq_pinconf_group_set,
+};
+
+static struct pinctrl_desc zynq_desc = {
+	.name = "zynq_pinctrl",
+	.pins = zynq_pins,
+	.npins = ARRAY_SIZE(zynq_pins),
+	.pctlops = &zynq_pctrl_ops,
+	.pmxops = &zynq_pinmux_ops,
+	.confops = &zynq_pinconf_ops,
+	.num_dt_params = ARRAY_SIZE(zynq_dt_params),
+	.params = zynq_dt_params,
+	.conf_items = zynq_conf_items,
+	.owner = THIS_MODULE,
+};
+
+static int zynq_pinctrl_probe(struct platform_device *pdev)
+
+{
+	struct resource *res;
+	struct zynq_pinctrl *pctrl;
+
+	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+	if (!pctrl)
+		return -ENOMEM;
+
+	pctrl->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"syscon");
+	if (IS_ERR(pctrl->syscon)) {
+		dev_err(&pdev->dev, "unable to get syscon\n");
+		return PTR_ERR(pctrl->syscon);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing IO resource\n");
+		return -ENODEV;
+	}
+	pctrl->pctrl_offset = res->start;
+
+	pctrl->groups = zynq_pctrl_groups;
+	pctrl->ngroups = ARRAY_SIZE(zynq_pctrl_groups);
+	pctrl->funcs = zynq_pmux_functions;
+	pctrl->nfuncs = ARRAY_SIZE(zynq_pmux_functions);
+
+	pctrl->pctrl = pinctrl_register(&zynq_desc, &pdev->dev, pctrl);
+	if (!pctrl->pctrl)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pctrl);
+
+	dev_info(&pdev->dev, "zynq pinctrl initialized\n");
+
+	return 0;
+}
+
+int zynq_pinctrl_remove(struct platform_device *pdev)
+{
+	struct zynq_pinctrl *pctrl = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(pctrl->pctrl);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_pinctrl_of_match[] = {
+	{ .compatible = "xlnx,pinctrl-zynq" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zynq_pinctrl_of_match);
+
+static struct platform_driver zynq_pinctrl_driver = {
+	.driver = {
+		.name = "zynq-pinctrl",
+		.of_match_table = zynq_pinctrl_of_match,
+	},
+	.probe = zynq_pinctrl_probe,
+	.remove = zynq_pinctrl_remove,
+};
+
+module_platform_driver(zynq_pinctrl_driver);
+
+MODULE_AUTHOR("S?ren Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Zynq pinctrl driver");
+MODULE_LICENSE("GPL");
-- 
2.2.1.1.gb42cc81

[PATCH v4 4/7] pinctrl: Add driver for Zynq

[Soren Brinkmann]

This adds a pin-control driver for Zynq.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v2:
- driver-specific DT properties are passed to the core in two arrays,
  one for the actual DT parsing one for the debugfs representation.
  Issue a compiler warning when the number of entries is not the same
  for both arrays.

Changes since v1:
 - fix EMIO_SD1_CD pin name
 - add USB to pinmux options

changes since RFCv2:
 - let Zynq select PINCTRL_ZYNQ. Boot hangs when pinctrl information is
   present in DT but no driver available.
 - add #defines to get rid of magical constants
 - add commas at end of initializers
 - separate changes in mach-zynq in separate patch
 - add driver specific io-standard DT property
 - refactored pinconf set function to not require arguments for
   argument-less properties
 - squash other patches in
   - support for IO-standard property
   - support for low-power mode property
   - migration to pinconf_generic_dt_node_to_map_all()
 - use newly created infrastructure to add pass driver-specific DT
   params to pinconf-generic

changes since RFC:
 - use syscon/regmap to access registers in SLCR space
 - rebase to 3.18: rename enable -> set_mux
 - add kernel-doc
 - support pinconf
   - supported attributes
     - pin-bias: pull up, tristate, disable
     - slew-rate: 0 == slow, 1 == fast; generic pinconf does not display
       argument
---
 drivers/pinctrl/Kconfig        |    8 +
 drivers/pinctrl/Makefile       |    1 +
 drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1185 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d014f22f387a..67c8db927454 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -191,6 +191,14 @@ config PINCTRL_PALMAS
 	  open drain configuration for the Palmas series devices like
 	  TPS65913, TPS80036 etc.
 
+config PINCTRL_ZYNQ
+	bool "Pinctrl driver for Xilinx Zynq"
+	depends on ARCH_ZYNQ
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  This selectes the pinctrl driver for Xilinx Zynq.
+
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c030b3db8034..886357556e87 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
 obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
 obj-y				+= freescale/
diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c
new file mode 100644
index 000000000000..c2fc9035dde9
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-zynq.c
@@ -0,0 +1,1176 @@
+/*
+ * Zynq pin controller
+ *
+ *  Copyright (C) 2014 Xilinx
+ *
+ *  Sören Brinkmann <soren.brinkmann@xilinx.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include "pinctrl-utils.h"
+#include "core.h"
+
+#define ZYNQ_NUM_MIOS	54
+
+#define ZYNQ_PCTRL_MIO_MST_TRI0	0x10c
+#define ZYNQ_PCTRL_MIO_MST_TRI1	0x110
+
+#define ZYNQ_PINMUX_MUX_SHIFT	1
+#define ZYNQ_PINMUX_MUX_MASK	(0x7f << ZYNQ_PINMUX_MUX_SHIFT)
+
+/**
+ * struct zynq_pinctrl - driver data
+ * @pctrl:		Pinctrl device
+ * @syscon:		Syscon regmap
+ * @pctrl_offset:	Offset for pinctrl into the @syscon space
+ * @groups:		Pingroups
+ * @ngroupos:		Number of @groups
+ * @funcs:		Pinmux functions
+ * @nfuncs:		Number of @funcs
+ */
+struct zynq_pinctrl {
+	struct pinctrl_dev *pctrl;
+	struct regmap *syscon;
+	u32 pctrl_offset;
+	const struct zynq_pctrl_group *groups;
+	unsigned int ngroups;
+	const struct zynq_pinmux_function *funcs;
+	unsigned int nfuncs;
+};
+
+struct zynq_pctrl_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned npins;
+};
+
+/**
+ * struct zynq_pinmux_function - a pinmux function
+ * @name:	Name of the pinmux function.
+ * @groups:	List of pingroups for this function.
+ * @ngroups:	Number of entries in @groups.
+ * @mux_val:	Selector for this function
+ * @mux:	Offset of function specific mux
+ * @mux_mask:	Mask for function specific selector
+ * @mux_shift:	Shift for function specific selector
+ */
+struct zynq_pinmux_function {
+	const char *name;
+	const char * const *groups;
+	unsigned int ngroups;
+	unsigned int mux_val;
+	u32 mux;
+	u32 mux_mask;
+	u8 mux_shift;
+};
+
+enum zynq_pinmux_functions {
+	ZYNQ_PMUX_can0,
+	ZYNQ_PMUX_can1,
+	ZYNQ_PMUX_ethernet0,
+	ZYNQ_PMUX_ethernet1,
+	ZYNQ_PMUX_gpio0,
+	ZYNQ_PMUX_i2c0,
+	ZYNQ_PMUX_i2c1,
+	ZYNQ_PMUX_mdio0,
+	ZYNQ_PMUX_mdio1,
+	ZYNQ_PMUX_qspi0,
+	ZYNQ_PMUX_qspi1,
+	ZYNQ_PMUX_qspi_fbclk,
+	ZYNQ_PMUX_qspi_cs1,
+	ZYNQ_PMUX_spi0,
+	ZYNQ_PMUX_spi1,
+	ZYNQ_PMUX_sdio0,
+	ZYNQ_PMUX_sdio0_pc,
+	ZYNQ_PMUX_sdio0_cd,
+	ZYNQ_PMUX_sdio0_wp,
+	ZYNQ_PMUX_sdio1,
+	ZYNQ_PMUX_sdio1_pc,
+	ZYNQ_PMUX_sdio1_cd,
+	ZYNQ_PMUX_sdio1_wp,
+	ZYNQ_PMUX_smc0_nor,
+	ZYNQ_PMUX_smc0_nor_cs1,
+	ZYNQ_PMUX_smc0_nor_addr25,
+	ZYNQ_PMUX_smc0_nand,
+	ZYNQ_PMUX_ttc0,
+	ZYNQ_PMUX_ttc1,
+	ZYNQ_PMUX_uart0,
+	ZYNQ_PMUX_uart1,
+	ZYNQ_PMUX_usb0,
+	ZYNQ_PMUX_usb1,
+	ZYNQ_PMUX_swdt0,
+	ZYNQ_PMUX_MAX_FUNC
+};
+
+const struct pinctrl_pin_desc zynq_pins[] = {
+	PINCTRL_PIN(0,  "MIO0"),
+	PINCTRL_PIN(1,  "MIO1"),
+	PINCTRL_PIN(2,  "MIO2"),
+	PINCTRL_PIN(3,  "MIO3"),
+	PINCTRL_PIN(4,  "MIO4"),
+	PINCTRL_PIN(5,  "MIO5"),
+	PINCTRL_PIN(6,  "MIO6"),
+	PINCTRL_PIN(7,  "MIO7"),
+	PINCTRL_PIN(8,  "MIO8"),
+	PINCTRL_PIN(9,  "MIO9"),
+	PINCTRL_PIN(10, "MIO10"),
+	PINCTRL_PIN(11, "MIO11"),
+	PINCTRL_PIN(12, "MIO12"),
+	PINCTRL_PIN(13, "MIO13"),
+	PINCTRL_PIN(14, "MIO14"),
+	PINCTRL_PIN(15, "MIO15"),
+	PINCTRL_PIN(16, "MIO16"),
+	PINCTRL_PIN(17, "MIO17"),
+	PINCTRL_PIN(18, "MIO18"),
+	PINCTRL_PIN(19, "MIO19"),
+	PINCTRL_PIN(20, "MIO20"),
+	PINCTRL_PIN(21, "MIO21"),
+	PINCTRL_PIN(22, "MIO22"),
+	PINCTRL_PIN(23, "MIO23"),
+	PINCTRL_PIN(24, "MIO24"),
+	PINCTRL_PIN(25, "MIO25"),
+	PINCTRL_PIN(26, "MIO26"),
+	PINCTRL_PIN(27, "MIO27"),
+	PINCTRL_PIN(28, "MIO28"),
+	PINCTRL_PIN(29, "MIO29"),
+	PINCTRL_PIN(30, "MIO30"),
+	PINCTRL_PIN(31, "MIO31"),
+	PINCTRL_PIN(32, "MIO32"),
+	PINCTRL_PIN(33, "MIO33"),
+	PINCTRL_PIN(34, "MIO34"),
+	PINCTRL_PIN(35, "MIO35"),
+	PINCTRL_PIN(36, "MIO36"),
+	PINCTRL_PIN(37, "MIO37"),
+	PINCTRL_PIN(38, "MIO38"),
+	PINCTRL_PIN(39, "MIO39"),
+	PINCTRL_PIN(40, "MIO40"),
+	PINCTRL_PIN(41, "MIO41"),
+	PINCTRL_PIN(42, "MIO42"),
+	PINCTRL_PIN(43, "MIO43"),
+	PINCTRL_PIN(44, "MIO44"),
+	PINCTRL_PIN(45, "MIO45"),
+	PINCTRL_PIN(46, "MIO46"),
+	PINCTRL_PIN(47, "MIO47"),
+	PINCTRL_PIN(48, "MIO48"),
+	PINCTRL_PIN(49, "MIO49"),
+	PINCTRL_PIN(50, "MIO50"),
+	PINCTRL_PIN(51, "MIO51"),
+	PINCTRL_PIN(52, "MIO52"),
+	PINCTRL_PIN(53, "MIO53"),
+	PINCTRL_PIN(54, "EMIO_SD0_WP"),
+	PINCTRL_PIN(55, "EMIO_SD0_CD"),
+	PINCTRL_PIN(56, "EMIO_SD1_WP"),
+	PINCTRL_PIN(57, "EMIO_SD1_CD"),
+};
+
+/* pin groups */
+static const unsigned int ethernet0_0_pins[] = {16, 17, 18, 19, 20, 21, 22, 23,
+						24, 25, 26, 27};
+static const unsigned int ethernet1_0_pins[] = {28, 29, 30, 31, 32, 33, 34, 35,
+						36, 37, 38, 39};
+static const unsigned int mdio0_0_pins[] = {52, 53};
+static const unsigned int mdio1_0_pins[] = {52, 53};
+static const unsigned int qspi0_0_pins[] = {1, 2, 3, 4, 5, 6};
+
+static const unsigned int qspi1_0_pins[] = {9, 10, 11, 12, 13};
+static const unsigned int qspi_cs1_pins[] = {0};
+static const unsigned int qspi_fbclk_pins[] = {8};
+static const unsigned int spi0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int spi0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int spi0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int spi1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int spi1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int spi1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int spi1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_0_pins[] = {16, 17, 18, 19, 20, 21};
+static const unsigned int sdio0_1_pins[] = {28, 29, 30, 31, 32, 33};
+static const unsigned int sdio0_2_pins[] = {40, 41, 42, 43, 44, 45};
+static const unsigned int sdio1_0_pins[] = {10, 11, 12, 13, 14, 15};
+static const unsigned int sdio1_1_pins[] = {22, 23, 24, 25, 26, 27};
+static const unsigned int sdio1_2_pins[] = {34, 35, 36, 37, 38, 39};
+static const unsigned int sdio1_3_pins[] = {46, 47, 48, 49, 40, 51};
+static const unsigned int sdio0_emio_wp_pins[] = {54};
+static const unsigned int sdio0_emio_cd_pins[] = {55};
+static const unsigned int sdio1_emio_wp_pins[] = {56};
+static const unsigned int sdio1_emio_cd_pins[] = {57};
+static const unsigned int smc0_nor_pins[] = {0, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13,
+					     15, 16, 17, 18, 19, 20, 21, 22, 23,
+					     24, 25, 26, 27, 28, 29, 30, 31, 32,
+					     33, 34, 35, 36, 37, 38, 39};
+static const unsigned int smc0_nor_cs1_pins[] = {1};
+static const unsigned int smc0_nor_addr25_pins[] = {1};
+static const unsigned int smc0_nand_pins[] = {0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+					      12, 13, 14, 16, 17, 18, 19, 20,
+					      21, 22, 23};
+/* Note: CAN MIO clock inputs are modeled in the clock framework */
+static const unsigned int can0_0_pins[] = {10, 11};
+static const unsigned int can0_1_pins[] = {14, 15};
+static const unsigned int can0_2_pins[] = {18, 19};
+static const unsigned int can0_3_pins[] = {22, 23};
+static const unsigned int can0_4_pins[] = {26, 27};
+static const unsigned int can0_5_pins[] = {30, 31};
+static const unsigned int can0_6_pins[] = {34, 35};
+static const unsigned int can0_7_pins[] = {38, 39};
+static const unsigned int can0_8_pins[] = {42, 43};
+static const unsigned int can0_9_pins[] = {46, 47};
+static const unsigned int can0_10_pins[] = {50, 51};
+static const unsigned int can1_0_pins[] = {8, 9};
+static const unsigned int can1_1_pins[] = {12, 13};
+static const unsigned int can1_2_pins[] = {16, 17};
+static const unsigned int can1_3_pins[] = {20, 21};
+static const unsigned int can1_4_pins[] = {24, 25};
+static const unsigned int can1_5_pins[] = {28, 29};
+static const unsigned int can1_6_pins[] = {32, 33};
+static const unsigned int can1_7_pins[] = {36, 37};
+static const unsigned int can1_8_pins[] = {40, 41};
+static const unsigned int can1_9_pins[] = {44, 45};
+static const unsigned int can1_10_pins[] = {48, 49};
+static const unsigned int can1_11_pins[] = {52, 53};
+static const unsigned int uart0_0_pins[] = {10, 11};
+static const unsigned int uart0_1_pins[] = {14, 15};
+static const unsigned int uart0_2_pins[] = {18, 19};
+static const unsigned int uart0_3_pins[] = {22, 23};
+static const unsigned int uart0_4_pins[] = {26, 27};
+static const unsigned int uart0_5_pins[] = {30, 31};
+static const unsigned int uart0_6_pins[] = {34, 35};
+static const unsigned int uart0_7_pins[] = {38, 39};
+static const unsigned int uart0_8_pins[] = {42, 43};
+static const unsigned int uart0_9_pins[] = {46, 47};
+static const unsigned int uart0_10_pins[] = {50, 51};
+static const unsigned int uart1_0_pins[] = {8, 9};
+static const unsigned int uart1_1_pins[] = {12, 13};
+static const unsigned int uart1_2_pins[] = {16, 17};
+static const unsigned int uart1_3_pins[] = {20, 21};
+static const unsigned int uart1_4_pins[] = {24, 25};
+static const unsigned int uart1_5_pins[] = {28, 29};
+static const unsigned int uart1_6_pins[] = {32, 33};
+static const unsigned int uart1_7_pins[] = {36, 37};
+static const unsigned int uart1_8_pins[] = {40, 41};
+static const unsigned int uart1_9_pins[] = {44, 45};
+static const unsigned int uart1_10_pins[] = {48, 49};
+static const unsigned int uart1_11_pins[] = {52, 53};
+static const unsigned int i2c0_0_pins[] = {10, 11};
+static const unsigned int i2c0_1_pins[] = {14, 15};
+static const unsigned int i2c0_2_pins[] = {18, 19};
+static const unsigned int i2c0_3_pins[] = {22, 23};
+static const unsigned int i2c0_4_pins[] = {26, 27};
+static const unsigned int i2c0_5_pins[] = {30, 31};
+static const unsigned int i2c0_6_pins[] = {34, 35};
+static const unsigned int i2c0_7_pins[] = {38, 39};
+static const unsigned int i2c0_8_pins[] = {42, 43};
+static const unsigned int i2c0_9_pins[] = {46, 47};
+static const unsigned int i2c0_10_pins[] = {50, 51};
+static const unsigned int i2c1_0_pins[] = {12, 13};
+static const unsigned int i2c1_1_pins[] = {16, 17};
+static const unsigned int i2c1_2_pins[] = {20, 21};
+static const unsigned int i2c1_3_pins[] = {24, 25};
+static const unsigned int i2c1_4_pins[] = {28, 29};
+static const unsigned int i2c1_5_pins[] = {32, 33};
+static const unsigned int i2c1_6_pins[] = {36, 37};
+static const unsigned int i2c1_7_pins[] = {40, 41};
+static const unsigned int i2c1_8_pins[] = {44, 45};
+static const unsigned int i2c1_9_pins[] = {48, 49};
+static const unsigned int i2c1_10_pins[] = {52, 53};
+static const unsigned int ttc0_0_pins[] = {18, 19};
+static const unsigned int ttc0_1_pins[] = {30, 31};
+static const unsigned int ttc0_2_pins[] = {42, 43};
+static const unsigned int ttc1_0_pins[] = {16, 17};
+static const unsigned int ttc1_1_pins[] = {28, 29};
+static const unsigned int ttc1_2_pins[] = {40, 41};
+static const unsigned int swdt0_0_pins[] = {14, 15};
+static const unsigned int swdt0_1_pins[] = {26, 27};
+static const unsigned int swdt0_2_pins[] = {38, 39};
+static const unsigned int swdt0_3_pins[] = {50, 51};
+static const unsigned int swdt0_4_pins[] = {52, 53};
+static const unsigned int gpio0_0_pins[] = {0};
+static const unsigned int gpio0_1_pins[] = {1};
+static const unsigned int gpio0_2_pins[] = {2};
+static const unsigned int gpio0_3_pins[] = {3};
+static const unsigned int gpio0_4_pins[] = {4};
+static const unsigned int gpio0_5_pins[] = {5};
+static const unsigned int gpio0_6_pins[] = {6};
+static const unsigned int gpio0_7_pins[] = {7};
+static const unsigned int gpio0_8_pins[] = {8};
+static const unsigned int gpio0_9_pins[] = {9};
+static const unsigned int gpio0_10_pins[] = {10};
+static const unsigned int gpio0_11_pins[] = {11};
+static const unsigned int gpio0_12_pins[] = {12};
+static const unsigned int gpio0_13_pins[] = {13};
+static const unsigned int gpio0_14_pins[] = {14};
+static const unsigned int gpio0_15_pins[] = {15};
+static const unsigned int gpio0_16_pins[] = {16};
+static const unsigned int gpio0_17_pins[] = {17};
+static const unsigned int gpio0_18_pins[] = {18};
+static const unsigned int gpio0_19_pins[] = {19};
+static const unsigned int gpio0_20_pins[] = {20};
+static const unsigned int gpio0_21_pins[] = {21};
+static const unsigned int gpio0_22_pins[] = {22};
+static const unsigned int gpio0_23_pins[] = {23};
+static const unsigned int gpio0_24_pins[] = {24};
+static const unsigned int gpio0_25_pins[] = {25};
+static const unsigned int gpio0_26_pins[] = {26};
+static const unsigned int gpio0_27_pins[] = {27};
+static const unsigned int gpio0_28_pins[] = {28};
+static const unsigned int gpio0_29_pins[] = {29};
+static const unsigned int gpio0_30_pins[] = {30};
+static const unsigned int gpio0_31_pins[] = {31};
+static const unsigned int gpio0_32_pins[] = {32};
+static const unsigned int gpio0_33_pins[] = {33};
+static const unsigned int gpio0_34_pins[] = {34};
+static const unsigned int gpio0_35_pins[] = {35};
+static const unsigned int gpio0_36_pins[] = {36};
+static const unsigned int gpio0_37_pins[] = {37};
+static const unsigned int gpio0_38_pins[] = {38};
+static const unsigned int gpio0_39_pins[] = {39};
+static const unsigned int gpio0_40_pins[] = {40};
+static const unsigned int gpio0_41_pins[] = {41};
+static const unsigned int gpio0_42_pins[] = {42};
+static const unsigned int gpio0_43_pins[] = {43};
+static const unsigned int gpio0_44_pins[] = {44};
+static const unsigned int gpio0_45_pins[] = {45};
+static const unsigned int gpio0_46_pins[] = {46};
+static const unsigned int gpio0_47_pins[] = {47};
+static const unsigned int gpio0_48_pins[] = {48};
+static const unsigned int gpio0_49_pins[] = {49};
+static const unsigned int gpio0_50_pins[] = {50};
+static const unsigned int gpio0_51_pins[] = {51};
+static const unsigned int gpio0_52_pins[] = {52};
+static const unsigned int gpio0_53_pins[] = {53};
+static const unsigned int usb0_0_pins[] = {28, 19, 30, 31, 32, 33, 34, 35, 36,
+					   37, 38, 39};
+static const unsigned int usb1_0_pins[] = {40, 41, 42, 43, 44, 45, 46, 47, 48,
+					   49, 50, 51};
+
+#define DEFINE_ZYNQ_PINCTRL_GRP(nm) \
+	{ \
+		.name = #nm "_grp", \
+		.pins = nm ## _pins, \
+		.npins = ARRAY_SIZE(nm ## _pins), \
+	}
+
+struct zynq_pctrl_group zynq_pctrl_groups[] = {
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ethernet1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(mdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_fbclk),
+	DEFINE_ZYNQ_PINCTRL_GRP(qspi_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(spi1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio0_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_wp),
+	DEFINE_ZYNQ_PINCTRL_GRP(sdio1_emio_cd),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_cs1),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nor_addr25),
+	DEFINE_ZYNQ_PINCTRL_GRP(smc0_nand),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(can1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(uart1_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(i2c1_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(ttc1_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(swdt0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_1),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_2),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_3),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_4),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_5),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_6),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_7),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_8),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_9),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_10),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_11),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_12),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_13),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_14),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_15),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_16),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_17),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_18),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_19),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_20),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_21),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_22),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_23),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_24),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_25),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_26),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_27),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_28),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_29),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_30),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_31),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_32),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_33),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_34),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_35),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_36),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_37),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_38),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_39),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_40),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_41),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_42),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_43),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_44),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_45),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_46),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_47),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_48),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_49),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_50),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_51),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_52),
+	DEFINE_ZYNQ_PINCTRL_GRP(gpio0_53),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb0_0),
+	DEFINE_ZYNQ_PINCTRL_GRP(usb1_0),
+};
+
+/* function groups */
+static const char * const ethernet0_groups[] = {"ethernet0_0_grp"};
+static const char * const ethernet1_groups[] = {"ethernet1_0_grp"};
+static const char * const usb0_groups[] = {"usb0_0_grp"};
+static const char * const usb1_groups[] = {"usb1_0_grp"};
+static const char * const mdio0_groups[] = {"mdio0_0_grp"};
+static const char * const mdio1_groups[] = {"mdio1_0_grp"};
+static const char * const qspi0_groups[] = {"qspi0_0_grp"};
+static const char * const qspi1_groups[] = {"qspi0_1_grp"};
+static const char * const qspi_fbclk_groups[] = {"qspi_fbclk_grp"};
+static const char * const qspi_cs1_groups[] = {"qspi_cs1_grp"};
+static const char * const spi0_groups[] = {"spi0_0_grp", "spi0_1_grp",
+					   "spi0_2_grp"};
+static const char * const spi1_groups[] = {"spi1_0_grp", "spi1_1_grp",
+					   "spi1_2_grp", "spi1_3_grp"};
+static const char * const sdio0_groups[] = {"sdio0_0_grp", "sdio0_1_grp",
+					    "sdio0_2_grp"};
+static const char * const sdio1_groups[] = {"sdio1_0_grp", "sdio1_1_grp",
+					    "sdio1_2_grp", "sdio1_3_grp"};
+static const char * const sdio0_pc_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp"};
+static const char * const sdio1_pc_groups[] = {"gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+static const char * const sdio0_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_cd_grp"};
+static const char * const sdio0_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio0_emio_wp_grp"};
+static const char * const sdio1_cd_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_cd_grp"};
+static const char * const sdio1_wp_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp", "sdio1_emio_wp_grp"};
+static const char * const smc0_nor_groups[] = {"smc0_nor"};
+static const char * const smc0_nor_cs1_groups[] = {"smc0_nor_cs1_grp"};
+static const char * const smc0_nor_addr25_groups[] = {"smc0_nor_addr25_grp"};
+static const char * const smc0_nand_groups[] = {"smc0_nand"};
+static const char * const can0_groups[] = {"can0_0_grp", "can0_1_grp",
+		"can0_2_grp", "can0_3_grp", "can0_4_grp", "can0_5_grp",
+		"can0_6_grp", "can0_7_grp", "can0_8_grp", "can0_9_grp",
+		"can0_10_grp"};
+static const char * const can1_groups[] = {"can1_0_grp", "can1_1_grp",
+		"can1_2_grp", "can1_3_grp", "can1_4_grp", "can1_5_grp",
+		"can1_6_grp", "can1_7_grp", "can1_8_grp", "can1_9_grp",
+		"can1_10_grp", "can1_11_grp"};
+static const char * const uart0_groups[] = {"uart0_0_grp", "uart0_1_grp",
+		"uart0_2_grp", "uart0_3_grp", "uart0_4_grp", "uart0_5_grp",
+		"uart0_6_grp", "uart0_7_grp", "uart0_8_grp", "uart0_9_grp",
+		"uart0_10_grp"};
+static const char * const uart1_groups[] = {"uart1_0_grp", "uart1_1_grp",
+		"uart1_2_grp", "uart1_3_grp", "uart1_4_grp", "uart1_5_grp",
+		"uart1_6_grp", "uart1_7_grp", "uart1_8_grp", "uart1_9_grp",
+		"uart1_10_grp", "uart1_11_grp"};
+static const char * const i2c0_groups[] = {"i2c0_0_grp", "i2c0_1_grp",
+		"i2c0_2_grp", "i2c0_3_grp", "i2c0_4_grp", "i2c0_5_grp",
+		"i2c0_6_grp", "i2c0_7_grp", "i2c0_8_grp", "i2c0_9_grp",
+		"i2c0_10_grp"};
+static const char * const i2c1_groups[] = {"i2c1_0_grp", "i2c1_1_grp",
+		"i2c1_2_grp", "i2c1_3_grp", "i2c1_4_grp", "i2c1_5_grp",
+		"i2c1_6_grp", "i2c1_7_grp", "i2c1_8_grp", "i2c1_9_grp",
+		"i2c1_10_grp"};
+static const char * const ttc0_groups[] = {"ttc0_0_grp", "ttc0_1_grp",
+					   "ttc0_2_grp"};
+static const char * const ttc1_groups[] = {"ttc1_0_grp", "ttc1_1_grp",
+					   "ttc1_2_grp"};
+static const char * const swdt0_groups[] = {"swdt0_0_grp", "swdt0_1_grp",
+		"swdt0_2_grp", "swdt0_3_grp", "swdt0_4_grp"};
+static const char * const gpio0_groups[] = {"gpio0_0_grp",
+		"gpio0_2_grp", "gpio0_4_grp", "gpio0_6_grp",
+		"gpio0_8_grp", "gpio0_10_grp", "gpio0_12_grp",
+		"gpio0_14_grp", "gpio0_16_grp", "gpio0_18_grp",
+		"gpio0_20_grp", "gpio0_22_grp", "gpio0_24_grp",
+		"gpio0_26_grp", "gpio0_28_grp", "gpio0_30_grp",
+		"gpio0_32_grp", "gpio0_34_grp", "gpio0_36_grp",
+		"gpio0_38_grp", "gpio0_40_grp", "gpio0_42_grp",
+		"gpio0_44_grp", "gpio0_46_grp", "gpio0_48_grp",
+		"gpio0_50_grp", "gpio0_52_grp", "gpio0_1_grp",
+		"gpio0_3_grp", "gpio0_5_grp", "gpio0_7_grp",
+		"gpio0_9_grp", "gpio0_11_grp", "gpio0_13_grp",
+		"gpio0_15_grp", "gpio0_17_grp", "gpio0_19_grp",
+		"gpio0_21_grp", "gpio0_23_grp", "gpio0_25_grp",
+		"gpio0_27_grp", "gpio0_29_grp", "gpio0_31_grp",
+		"gpio0_33_grp", "gpio0_35_grp", "gpio0_37_grp",
+		"gpio0_39_grp", "gpio0_41_grp", "gpio0_43_grp",
+		"gpio0_45_grp", "gpio0_47_grp", "gpio0_49_grp",
+		"gpio0_51_grp", "gpio0_53_grp"};
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION(fname, mval)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+	}
+
+#define DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(fname, mval, mux, mask, shift)	\
+	[ZYNQ_PMUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+		.mux_val = mval,			\
+		.mux_mask = mask,			\
+		.mux_shift = shift,			\
+	}
+
+#define ZYNQ_SDIO_WP_SHIFT	0
+#define ZYNQ_SDIO_WP_MASK	(0x3f << ZYNQ_SDIO_WP_SHIFT)
+#define ZYNQ_SDIO_CD_SHIFT	16
+#define ZYNQ_SDIO_CD_MASK	(0x3f << ZYNQ_SDIO_CD_SHIFT)
+
+static const struct zynq_pinmux_function zynq_pmux_functions[] = {
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ethernet1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb0, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(usb1, 2),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(mdio1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi0, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_fbclk, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(qspi_cs1, 1),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi0, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(spi1, 0x50),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio0_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_wp, 0, 130, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio0_cd, 0, 130, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1, 0x40),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(sdio1_pc, 0xc),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_wp, 0, 134, ZYNQ_SDIO_WP_MASK,
+					ZYNQ_SDIO_WP_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION_MUX(sdio1_cd, 0, 134, ZYNQ_SDIO_CD_MASK,
+					ZYNQ_SDIO_CD_SHIFT),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_cs1, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nor_addr25, 4),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(smc0_nand, 8),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can0, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(can1, 0x10),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart0, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(uart1, 0x70),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c0, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(i2c1, 0x20),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc0, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(ttc1, 0x60),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(swdt0, 0x30),
+	DEFINE_ZYNQ_PINMUX_FUNCTION(gpio0, 0),
+};
+
+
+/* pinctrl */
+static int zynq_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->ngroups;
+}
+
+static const char *zynq_pctrl_get_group_name(struct pinctrl_dev *pctldev,
+					     unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->groups[selector].name;
+}
+
+static int zynq_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     const unsigned **pins,
+				     unsigned *num_pins)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = pctrl->groups[selector].pins;
+	*num_pins = pctrl->groups[selector].npins;
+
+	return 0;
+}
+
+static const struct pinctrl_ops zynq_pctrl_ops = {
+	.get_groups_count = zynq_pctrl_get_groups_count,
+	.get_group_name = zynq_pctrl_get_group_name,
+	.get_group_pins = zynq_pctrl_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+/* pinmux */
+static int zynq_pmux_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->nfuncs;
+}
+
+static const char *zynq_pmux_get_function_name(struct pinctrl_dev *pctldev,
+					       unsigned selector)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return pctrl->funcs[selector].name;
+}
+
+static int zynq_pmux_get_function_groups(struct pinctrl_dev *pctldev,
+					 unsigned selector,
+					 const char * const **groups,
+					 unsigned * const num_groups)
+{
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pctrl->funcs[selector].groups;
+	*num_groups = pctrl->funcs[selector].ngroups;
+	return 0;
+}
+
+static int zynq_pinmux_set_mux(struct pinctrl_dev *pctldev,
+			       unsigned function,
+			       unsigned group)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[group];
+	const struct zynq_pinmux_function *func = &pctrl->funcs[function];
+
+	/*
+	 * SD WP & CD are special. They have dedicated registers
+	 * to mux them in
+	 */
+	if (function == ZYNQ_PMUX_sdio0_cd || function == ZYNQ_PMUX_sdio0_wp ||
+			function == ZYNQ_PMUX_sdio1_cd ||
+			function == ZYNQ_PMUX_sdio1_wp) {
+		u32 reg;
+
+		ret = regmap_read(pctrl->syscon,
+				  pctrl->pctrl_offset + func->mux, &reg);
+		if (ret)
+			return ret;
+
+		reg &= ~func->mux_mask;
+		reg |= pgrp->pins[0] << func->mux_shift;
+		ret = regmap_write(pctrl->syscon,
+				   pctrl->pctrl_offset + func->mux, reg);
+		if (ret)
+			return ret;
+	} else {
+		for (i = 0; i < pgrp->npins; i++) {
+			unsigned int pin = pgrp->pins[i];
+			u32 reg, addr = pctrl->pctrl_offset + (4 * pin);
+
+			ret = regmap_read(pctrl->syscon, addr, &reg);
+			if (ret)
+				return ret;
+
+			reg &= ~ZYNQ_PINMUX_MUX_MASK;
+			reg |= func->mux_val << ZYNQ_PINMUX_MUX_SHIFT;
+			ret = regmap_write(pctrl->syscon, addr, reg);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops zynq_pinmux_ops = {
+	.get_functions_count = zynq_pmux_get_functions_count,
+	.get_function_name = zynq_pmux_get_function_name,
+	.get_function_groups = zynq_pmux_get_function_groups,
+	.set_mux = zynq_pinmux_set_mux,
+};
+
+/* pinconfig */
+#define ZYNQ_PINCONF_TRISTATE		BIT(0)
+#define ZYNQ_PINCONF_SPEED		BIT(8)
+#define ZYNQ_PINCONF_PULLUP		BIT(12)
+#define ZYNQ_PINCONF_DISABLE_RECVR	BIT(13)
+
+#define ZYNQ_PINCONF_IOTYPE_SHIFT	9
+#define ZYNQ_PINCONF_IOTYPE_MASK	(7 << ZYNQ_PINCONF_IOTYPE_SHIFT)
+
+enum zynq_io_standards {
+	zynq_iostd_min,
+	zynq_iostd_lvcmos18,
+	zynq_iostd_lvcmos25,
+	zynq_iostd_lvcmos33,
+	zynq_iostd_hstl,
+	zynq_iostd_max
+};
+
+/**
+ * enum zynq_pin_config_param - possible pin configuration parameters
+ * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
+ *	this parameter (on a custom format) tells the driver which alternative
+ *	IO standard to use.
+ */
+enum zynq_pin_config_param {
+	PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
+};
+
+static const struct pinconf_generic_dt_params zynq_dt_params[] = {
+	{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
+};
+
+static const struct pin_config_item zynq_conf_items[ARRAY_SIZE(zynq_dt_params)] = {
+	PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
+};
+
+static unsigned int zynq_pinconf_iostd_get(u32 reg)
+{
+	return (reg & ZYNQ_PINCONF_IOTYPE_MASK) >> ZYNQ_PINCONF_IOTYPE_SHIFT;
+}
+
+static int zynq_pinconf_cfg_get(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *config)
+{
+	u32 reg;
+	int ret;
+	unsigned int arg = 0;
+	unsigned int param = pinconf_to_config_param(*config);
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (!(reg & ZYNQ_PINCONF_PULLUP))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		if (!(reg & ZYNQ_PINCONF_TRISTATE))
+			return -EINVAL;
+		arg = 1;
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (reg & ZYNQ_PINCONF_PULLUP || reg & ZYNQ_PINCONF_TRISTATE)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		arg = !!(reg & ZYNQ_PINCONF_SPEED);
+		break;
+	case PIN_CONFIG_LOW_POWER_MODE:
+	{
+		enum zynq_io_standards iostd = zynq_pinconf_iostd_get(reg);
+
+		if (iostd != zynq_iostd_hstl)
+			return -EINVAL;
+		if (!(reg & ZYNQ_PINCONF_DISABLE_RECVR))
+			return -EINVAL;
+		arg = !!(reg & ZYNQ_PINCONF_DISABLE_RECVR);
+		break;
+	}
+	case PIN_CONFIG_IOSTANDARD:
+		arg = zynq_pinconf_iostd_get(reg);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+	return 0;
+}
+
+static int zynq_pinconf_cfg_set(struct pinctrl_dev *pctldev,
+				unsigned pin,
+				unsigned long *configs,
+				unsigned num_configs)
+{
+	int i, ret;
+	u32 reg;
+	u32 pullup = 0;
+	u32 tristate = 0;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= ZYNQ_NUM_MIOS)
+		return -ENOTSUPP;
+
+	ret = regmap_read(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), &reg);
+	if (ret)
+		return -EIO;
+
+	for (i = 0; i < num_configs; i++) {
+		unsigned int param = pinconf_to_config_param(configs[i]);
+		unsigned int arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			pullup = ZYNQ_PINCONF_PULLUP;
+			break;
+		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+			tristate = ZYNQ_PINCONF_TRISTATE;
+			break;
+		case PIN_CONFIG_BIAS_DISABLE:
+			reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+			break;
+		case PIN_CONFIG_SLEW_RATE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_SPEED;
+			else
+				reg &= ~ZYNQ_PINCONF_SPEED;
+
+			break;
+		case PIN_CONFIG_IOSTANDARD:
+			if (arg <= zynq_iostd_min || arg >= zynq_iostd_max) {
+				dev_warn(pctldev->dev,
+					 "unsupported IO standard '%u'\n",
+					 param);
+				break;
+			}
+			reg &= ~ZYNQ_PINCONF_IOTYPE_MASK;
+			reg |= arg << ZYNQ_PINCONF_IOTYPE_SHIFT;
+			break;
+		case PIN_CONFIG_LOW_POWER_MODE:
+			if (arg)
+				reg |= ZYNQ_PINCONF_DISABLE_RECVR;
+			else
+				reg &= ~ZYNQ_PINCONF_DISABLE_RECVR;
+
+			break;
+		default:
+			dev_warn(pctldev->dev,
+				 "unsupported configuration parameter '%u'\n",
+				 param);
+			continue;
+		}
+	}
+
+	if (tristate || pullup) {
+		reg &= ~(ZYNQ_PINCONF_PULLUP | ZYNQ_PINCONF_TRISTATE);
+		reg |= tristate | pullup;
+	}
+
+	ret = regmap_write(pctrl->syscon, pctrl->pctrl_offset + (4 * pin), reg);
+	if (ret)
+		return -EIO;
+
+	return 0;
+}
+
+static int zynq_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  unsigned long *configs,
+				  unsigned num_configs)
+{
+	int i, ret;
+	struct zynq_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct zynq_pctrl_group *pgrp = &pctrl->groups[selector];
+
+	for (i = 0; i < pgrp->npins; i++) {
+		ret = zynq_pinconf_cfg_set(pctldev, pgrp->pins[i], configs,
+					   num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops zynq_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = zynq_pinconf_cfg_get,
+	.pin_config_set = zynq_pinconf_cfg_set,
+	.pin_config_group_set = zynq_pinconf_group_set,
+};
+
+static struct pinctrl_desc zynq_desc = {
+	.name = "zynq_pinctrl",
+	.pins = zynq_pins,
+	.npins = ARRAY_SIZE(zynq_pins),
+	.pctlops = &zynq_pctrl_ops,
+	.pmxops = &zynq_pinmux_ops,
+	.confops = &zynq_pinconf_ops,
+	.num_dt_params = ARRAY_SIZE(zynq_dt_params),
+	.params = zynq_dt_params,
+	.conf_items = zynq_conf_items,
+	.owner = THIS_MODULE,
+};
+
+static int zynq_pinctrl_probe(struct platform_device *pdev)
+
+{
+	struct resource *res;
+	struct zynq_pinctrl *pctrl;
+
+	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+	if (!pctrl)
+		return -ENOMEM;
+
+	pctrl->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"syscon");
+	if (IS_ERR(pctrl->syscon)) {
+		dev_err(&pdev->dev, "unable to get syscon\n");
+		return PTR_ERR(pctrl->syscon);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing IO resource\n");
+		return -ENODEV;
+	}
+	pctrl->pctrl_offset = res->start;
+
+	pctrl->groups = zynq_pctrl_groups;
+	pctrl->ngroups = ARRAY_SIZE(zynq_pctrl_groups);
+	pctrl->funcs = zynq_pmux_functions;
+	pctrl->nfuncs = ARRAY_SIZE(zynq_pmux_functions);
+
+	pctrl->pctrl = pinctrl_register(&zynq_desc, &pdev->dev, pctrl);
+	if (!pctrl->pctrl)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pctrl);
+
+	dev_info(&pdev->dev, "zynq pinctrl initialized\n");
+
+	return 0;
+}
+
+int zynq_pinctrl_remove(struct platform_device *pdev)
+{
+	struct zynq_pinctrl *pctrl = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(pctrl->pctrl);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_pinctrl_of_match[] = {
+	{ .compatible = "xlnx,pinctrl-zynq" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zynq_pinctrl_of_match);
+
+static struct platform_driver zynq_pinctrl_driver = {
+	.driver = {
+		.name = "zynq-pinctrl",
+		.of_match_table = zynq_pinctrl_of_match,
+	},
+	.probe = zynq_pinctrl_probe,
+	.remove = zynq_pinctrl_remove,
+};
+
+module_platform_driver(zynq_pinctrl_driver);
+
+MODULE_AUTHOR("Sören Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Zynq pinctrl driver");
+MODULE_LICENSE("GPL");
-- 
2.2.1.1.gb42cc81

[PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Soren Brinkmann]

Select pinctrl and the Zynq pinctrl driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since RFC v2:
 - separate mach-zynq changes in their own patch
---
 arch/arm/mach-zynq/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
 	select HAVE_ARM_TWD if SMP
 	select ICST
 	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_ZYNQ
 	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
-- 
2.2.1.1.gb42cc81

[PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Soren Brinkmann]

Select pinctrl and the Zynq pinctrl driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since RFC v2:
 - separate mach-zynq changes in their own patch
---
 arch/arm/mach-zynq/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
 	select HAVE_ARM_TWD if SMP
 	select ICST
 	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_ZYNQ
 	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
-- 
2.2.1.1.gb42cc81

[PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Soren Brinkmann]

Select pinctrl and the Zynq pinctrl driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since RFC v2:
 - separate mach-zynq changes in their own patch
---
 arch/arm/mach-zynq/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index aaa5162c1509..78e5e007f52d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,6 +9,8 @@ config ARCH_ZYNQ
 	select HAVE_ARM_TWD if SMP
 	select ICST
 	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_ZYNQ
 	select SOC_BUS
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
-- 
2.2.1.1.gb42cc81

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Select pinctrl and the Zynq pinctrl driver.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>
> ---
> Changes since RFC v2:
>  - separate mach-zynq changes in their own patch

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Since we're only selecting some symbols and these will appear
in the merge window this can be applied orthogonally in the Zynq
tree target for ARM SoC.

Yours,
Linus Walleij

[PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Select pinctrl and the Zynq pinctrl driver.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas F?rber <afaerber@suse.de>
> ---
> Changes since RFC v2:
>  - separate mach-zynq changes in their own patch

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Since we're only selecting some symbols and these will appear
in the merge window this can be applied orthogonally in the Zynq
tree target for ARM SoC.

Yours,
Linus Walleij

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Select pinctrl and the Zynq pinctrl driver.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>
> ---
> Changes since RFC v2:
>  - separate mach-zynq changes in their own patch

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Since we're only selecting some symbols and these will appear
in the merge window this can be applied orthogonally in the Zynq
tree target for ARM SoC.

Yours,
Linus Walleij

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Select pinctrl and the Zynq pinctrl driver.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>
> ---
> Changes since RFC v2:
>  - separate mach-zynq changes in their own patch

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Since we're only selecting some symbols and these will appear
in the merge window this can be applied orthogonally in the Zynq
tree target for ARM SoC.

Yours,
Linus Walleij

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Michal Simek]

On 01/11/2015 10:36 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Select pinctrl and the Zynq pinctrl driver.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
>> ---
>> Changes since RFC v2:
>>  - separate mach-zynq changes in their own patch
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Since we're only selecting some symbols and these will appear
> in the merge window this can be applied orthogonally in the Zynq
> tree target for ARM SoC.
> 

Applied to zynq/soc.

Thanks,
Michal

[PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Michal Simek]

On 01/11/2015 10:36 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Select pinctrl and the Zynq pinctrl driver.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas F?rber <afaerber@suse.de>
>> ---
>> Changes since RFC v2:
>>  - separate mach-zynq changes in their own patch
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Since we're only selecting some symbols and these will appear
> in the merge window this can be applied orthogonally in the Zynq
> tree target for ARM SoC.
> 

Applied to zynq/soc.

Thanks,
Michal

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Michal Simek]

On 01/11/2015 10:36 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Select pinctrl and the Zynq pinctrl driver.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
>> ---
>> Changes since RFC v2:
>>  - separate mach-zynq changes in their own patch
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Since we're only selecting some symbols and these will appear
> in the merge window this can be applied orthogonally in the Zynq
> tree target for ARM SoC.
> 

Applied to zynq/soc.

Thanks,
Michal


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 5/7] ARM: zynq: Enable pinctrl

[Michal Simek]

On 01/11/2015 10:36 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Select pinctrl and the Zynq pinctrl driver.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
>> ---
>> Changes since RFC v2:
>>  - separate mach-zynq changes in their own patch
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Since we're only selecting some symbols and these will appear
> in the merge window this can be applied orthogonally in the Zynq
> tree target for ARM SoC.
> 

Applied to zynq/soc.

Thanks,
Michal

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Soren Brinkmann]

Add pinctrl descriptions to the zc702 and zc706 device trees.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v1:
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - separate config and mux nodes

Changes since RFC v2:
 - add pinconf properties to zc702 mdio node
 - remove arguments from bias-related props

Changes since RFC v1:
 - separate DT changes into their own patch
---
 arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
 arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ee3e5d675b05..9a19a319b0f1 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -237,7 +237,7 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
@@ -257,6 +257,12 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
 		};
 
 		dmac_s: dmac@f8003000 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 280f02dd4ddc..4995412f116f 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -40,6 +40,8 @@
 
 &can0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
 };
 
 &clkc {
@@ -50,15 +52,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -132,10 +143,180 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable = <0>;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 34f7812d2ee8..af590d2bb046 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -37,15 +37,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -111,10 +120,153 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
-- 
2.2.1.1.gb42cc81

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Soren Brinkmann]

Add pinctrl descriptions to the zc702 and zc706 device trees.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas F?rber <afaerber@suse.de>
---
Changes since v1:
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - separate config and mux nodes

Changes since RFC v2:
 - add pinconf properties to zc702 mdio node
 - remove arguments from bias-related props

Changes since RFC v1:
 - separate DT changes into their own patch
---
 arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
 arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ee3e5d675b05..9a19a319b0f1 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -237,7 +237,7 @@
 		slcr: slcr at f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc at 100 {
@@ -257,6 +257,12 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			pinctrl0: pinctrl at 700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
 		};
 
 		dmac_s: dmac at f8003000 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 280f02dd4ddc..4995412f116f 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -40,6 +40,8 @@
 
 &can0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
 };
 
 &clkc {
@@ -50,15 +52,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy at 7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch at 74 {
 		compatible = "nxp,pca9548";
@@ -132,10 +143,180 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable = <0>;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 34f7812d2ee8..af590d2bb046 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -37,15 +37,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy at 7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch at 74 {
 		compatible = "nxp,pca9548";
@@ -111,10 +120,153 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
-- 
2.2.1.1.gb42cc81

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Soren Brinkmann]

Add pinctrl descriptions to the zc702 and zc706 device trees.

Signed-off-by: Soren Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Tested-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
---
Changes since v1:
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - separate config and mux nodes

Changes since RFC v2:
 - add pinconf properties to zc702 mdio node
 - remove arguments from bias-related props

Changes since RFC v1:
 - separate DT changes into their own patch
---
 arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
 arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ee3e5d675b05..9a19a319b0f1 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -237,7 +237,7 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
@@ -257,6 +257,12 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
 		};
 
 		dmac_s: dmac@f8003000 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 280f02dd4ddc..4995412f116f 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -40,6 +40,8 @@
 
 &can0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
 };
 
 &clkc {
@@ -50,15 +52,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -132,10 +143,180 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable = <0>;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 34f7812d2ee8..af590d2bb046 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -37,15 +37,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -111,10 +120,153 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
-- 
2.2.1.1.gb42cc81

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Soren Brinkmann]

Add pinctrl descriptions to the zc702 and zc706 device trees.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Andreas Färber <afaerber@suse.de>
---
Changes since v1:
 - remove 'pinctrl-' prefix for pinctrl sub-nodes
 - separate config and mux nodes

Changes since RFC v2:
 - add pinconf properties to zc702 mdio node
 - remove arguments from bias-related props

Changes since RFC v1:
 - separate DT changes into their own patch
---
 arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
 arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ee3e5d675b05..9a19a319b0f1 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -237,7 +237,7 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
@@ -257,6 +257,12 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
 		};
 
 		dmac_s: dmac@f8003000 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 280f02dd4ddc..4995412f116f 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -40,6 +40,8 @@
 
 &can0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
 };
 
 &clkc {
@@ -50,15 +52,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -132,10 +143,180 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable = <0>;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 34f7812d2ee8..af590d2bb046 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -37,15 +37,24 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
 	};
 };
 
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
 
 	i2cswitch@74 {
 		compatible = "nxp,pca9548";
@@ -111,10 +120,153 @@
 	};
 };
 
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+};
+
 &sdhci0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
-- 
2.2.1.1.gb42cc81

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Add pinctrl descriptions to the zc702 and zc706 device trees.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Beautiful and in line with how I want things to look.

Yours,
Linus Walleij

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Add pinctrl descriptions to the zc702 and zc706 device trees.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas F?rber <afaerber@suse.de>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Beautiful and in line with how I want things to look.

Yours,
Linus Walleij

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Add pinctrl descriptions to the zc702 and zc706 device trees.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Beautiful and in line with how I want things to look.

Yours,
Linus Walleij

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Add pinctrl descriptions to the zc702 and zc706 device trees.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Beautiful and in line with how I want things to look.

Yours,
Linus Walleij

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

On 01/11/2015 10:38 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Beautiful and in line with how I want things to look.
> 
> Yours,
> Linus Walleij
> 

Applied to zynq/dt.

Thanks,
Michal

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

On 01/11/2015 10:38 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas F?rber <afaerber@suse.de>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Beautiful and in line with how I want things to look.
> 
> Yours,
> Linus Walleij
> 

Applied to zynq/dt.

Thanks,
Michal

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

On 01/11/2015 10:38 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Beautiful and in line with how I want things to look.
> 
> Yours,
> Linus Walleij
> 

Applied to zynq/dt.

Thanks,
Michal

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

On 01/11/2015 10:38 PM, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> 
>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Tested-by: Andreas Färber <afaerber@suse.de>
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Beautiful and in line with how I want things to look.
> 
> Yours,
> Linus Walleij
> 

Applied to zynq/dt.

Thanks,
Michal

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Am 12.01.2015 um 08:27 schrieb Michal Simek:
> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>> <soren.brinkmann@xilinx.com> wrote:
>>
>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>
>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>
>> Beautiful and in line with how I want things to look.
>>
>> Yours,
>> Linus Walleij
>>
> 
> Applied to zynq/dt.

Did you maybe forget to push?

https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

Am 12.01.2015 um 08:27 schrieb Michal Simek:
> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>> <soren.brinkmann@xilinx.com> wrote:
>>
>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>
>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Tested-by: Andreas F?rber <afaerber@suse.de>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>
>> Beautiful and in line with how I want things to look.
>>
>> Yours,
>> Linus Walleij
>>
> 
> Applied to zynq/dt.

Did you maybe forget to push?

https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG N?rnberg)

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150127/d5a26211/attachment-0001.sig>

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Am 12.01.2015 um 08:27 schrieb Michal Simek:
> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>> <soren.brinkmann@xilinx.com> wrote:
>>
>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>
>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>
>> Beautiful and in line with how I want things to look.
>>
>> Yours,
>> Linus Walleij
>>
> 
> Applied to zynq/dt.

Did you maybe forget to push?

https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Am 12.01.2015 um 08:27 schrieb Michal Simek:
> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>> <soren.brinkmann@xilinx.com> wrote:
>>
>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>
>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>
>> Beautiful and in line with how I want things to look.
>>
>> Yours,
>> Linus Walleij
>>
> 
> Applied to zynq/dt.

Did you maybe forget to push?

https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 806 bytes --]

On 01/27/2015 01:00 AM, Andreas Färber wrote:
> Am 12.01.2015 um 08:27 schrieb Michal Simek:
>> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>>> <soren.brinkmann@xilinx.com> wrote:
>>>
>>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>>
>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>>
>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Beautiful and in line with how I want things to look.
>>>
>>> Yours,
>>> Linus Walleij
>>>
>>
>> Applied to zynq/dt.
> 
> Did you maybe forget to push?
> 
> https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Ah sorry - I have pushed it now.

Thanks,
Michal



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

On 01/27/2015 01:00 AM, Andreas F?rber wrote:
> Am 12.01.2015 um 08:27 schrieb Michal Simek:
>> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>>> <soren.brinkmann@xilinx.com> wrote:
>>>
>>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>>
>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Tested-by: Andreas F?rber <afaerber@suse.de>
>>>
>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Beautiful and in line with how I want things to look.
>>>
>>> Yours,
>>> Linus Walleij
>>>
>>
>> Applied to zynq/dt.
> 
> Did you maybe forget to push?
> 
> https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Ah sorry - I have pushed it now.

Thanks,
Michal


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150128/55f98779/attachment.sig>

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

[-- Attachment #1.1: Type: text/plain, Size: 806 bytes --]

On 01/27/2015 01:00 AM, Andreas Färber wrote:
> Am 12.01.2015 um 08:27 schrieb Michal Simek:
>> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>>> <soren.brinkmann@xilinx.com> wrote:
>>>
>>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>>
>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>>
>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Beautiful and in line with how I want things to look.
>>>
>>> Yours,
>>> Linus Walleij
>>>
>>
>> Applied to zynq/dt.
> 
> Did you maybe forget to push?
> 
> https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Ah sorry - I have pushed it now.

Thanks,
Michal



[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 806 bytes --]

On 01/27/2015 01:00 AM, Andreas Färber wrote:
> Am 12.01.2015 um 08:27 schrieb Michal Simek:
>> On 01/11/2015 10:38 PM, Linus Walleij wrote:
>>> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
>>> <soren.brinkmann@xilinx.com> wrote:
>>>
>>>> Add pinctrl descriptions to the zc702 and zc706 device trees.
>>>>
>>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Tested-by: Andreas Färber <afaerber@suse.de>
>>>
>>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Beautiful and in line with how I want things to look.
>>>
>>> Yours,
>>> Linus Walleij
>>>
>>
>> Applied to zynq/dt.
> 
> Did you maybe forget to push?
> 
> https://github.com/Xilinx/linux-xlnx/commits/zynq/dt doesn't have it.

Ah sorry - I have pushed it now.

Thanks,
Michal



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 3072 bytes --]

Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> Add pinctrl descriptions to the zc702 and zc706 device trees.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>
> ---
> Changes since v1:
>  - remove 'pinctrl-' prefix for pinctrl sub-nodes
>  - separate config and mux nodes
> 
> Changes since RFC v2:
>  - add pinconf properties to zc702 mdio node
>  - remove arguments from bias-related props
> 
> Changes since RFC v1:
>  - separate DT changes into their own patch
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
>  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
>  3 files changed, 340 insertions(+), 1 deletion(-)
[...]
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index 280f02dd4ddc..4995412f116f 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
[...]
> @@ -50,15 +52,24 @@
>  	status = "okay";
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethernet_phy>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gem0_default>;
>  
>  	ethernet_phy: ethernet-phy@7 {
>  		reg = <7>;
>  	};
>  };
>  
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio0_default>;

On linux-next the equivalent no longer works for the Parallella, with
gpio failing to probe.

If I move these two properties to the leds node (for which I am
configuring gpio 7) then I get a heartbeat as before.

Regards,
Andreas

> +};
> +
>  &i2c0 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c0_default>;
>  
>  	i2cswitch@74 {
>  		compatible = "nxp,pca9548";
> @@ -132,10 +143,180 @@
>  	};
>  };
>  
> +&pinctrl0 {
[...]
> +	pinctrl_gpio0_default: gpio0-default {
> +		mux {
> +			function = "gpio0";
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +		};
> +
> +		conf {
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-pull-up {
> +			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
> +			bias-pull-up;
> +		};
> +
> +		conf-pull-none {
> +			pins = "MIO7", "MIO8";
> +			bias-disable;
> +		};
> +	};
[...]
> +};
> +
>  &sdhci0 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sdhci0_default>;
>  };
>  
>  &uart1 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1_default>;
>  };
[dito for zc706]

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> Add pinctrl descriptions to the zc702 and zc706 device trees.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas F?rber <afaerber@suse.de>
> ---
> Changes since v1:
>  - remove 'pinctrl-' prefix for pinctrl sub-nodes
>  - separate config and mux nodes
> 
> Changes since RFC v2:
>  - add pinconf properties to zc702 mdio node
>  - remove arguments from bias-related props
> 
> Changes since RFC v1:
>  - separate DT changes into their own patch
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
>  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
>  3 files changed, 340 insertions(+), 1 deletion(-)
[...]
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index 280f02dd4ddc..4995412f116f 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
[...]
> @@ -50,15 +52,24 @@
>  	status = "okay";
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethernet_phy>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gem0_default>;
>  
>  	ethernet_phy: ethernet-phy at 7 {
>  		reg = <7>;
>  	};
>  };
>  
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio0_default>;

On linux-next the equivalent no longer works for the Parallella, with
gpio failing to probe.

If I move these two properties to the leds node (for which I am
configuring gpio 7) then I get a heartbeat as before.

Regards,
Andreas

> +};
> +
>  &i2c0 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c0_default>;
>  
>  	i2cswitch at 74 {
>  		compatible = "nxp,pca9548";
> @@ -132,10 +143,180 @@
>  	};
>  };
>  
> +&pinctrl0 {
[...]
> +	pinctrl_gpio0_default: gpio0-default {
> +		mux {
> +			function = "gpio0";
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +		};
> +
> +		conf {
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-pull-up {
> +			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
> +			bias-pull-up;
> +		};
> +
> +		conf-pull-none {
> +			pins = "MIO7", "MIO8";
> +			bias-disable;
> +		};
> +	};
[...]
> +};
> +
>  &sdhci0 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sdhci0_default>;
>  };
>  
>  &uart1 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1_default>;
>  };
[dito for zc706]

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG N?rnberg)

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150127/1d700d8e/attachment.sig>

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 3122 bytes --]

Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> Add pinctrl descriptions to the zc702 and zc706 device trees.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> Tested-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
> ---
> Changes since v1:
>  - remove 'pinctrl-' prefix for pinctrl sub-nodes
>  - separate config and mux nodes
> 
> Changes since RFC v2:
>  - add pinconf properties to zc702 mdio node
>  - remove arguments from bias-related props
> 
> Changes since RFC v1:
>  - separate DT changes into their own patch
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
>  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
>  3 files changed, 340 insertions(+), 1 deletion(-)
[...]
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index 280f02dd4ddc..4995412f116f 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
[...]
> @@ -50,15 +52,24 @@
>  	status = "okay";
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethernet_phy>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gem0_default>;
>  
>  	ethernet_phy: ethernet-phy@7 {
>  		reg = <7>;
>  	};
>  };
>  
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio0_default>;

On linux-next the equivalent no longer works for the Parallella, with
gpio failing to probe.

If I move these two properties to the leds node (for which I am
configuring gpio 7) then I get a heartbeat as before.

Regards,
Andreas

> +};
> +
>  &i2c0 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c0_default>;
>  
>  	i2cswitch@74 {
>  		compatible = "nxp,pca9548";
> @@ -132,10 +143,180 @@
>  	};
>  };
>  
> +&pinctrl0 {
[...]
> +	pinctrl_gpio0_default: gpio0-default {
> +		mux {
> +			function = "gpio0";
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +		};
> +
> +		conf {
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-pull-up {
> +			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
> +			bias-pull-up;
> +		};
> +
> +		conf-pull-none {
> +			pins = "MIO7", "MIO8";
> +			bias-disable;
> +		};
> +	};
[...]
> +};
> +
>  &sdhci0 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sdhci0_default>;
>  };
>  
>  &uart1 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1_default>;
>  };
[dito for zc706]

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Andreas Färber]

[-- Attachment #1: Type: text/plain, Size: 3072 bytes --]

Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> Add pinctrl descriptions to the zc702 and zc706 device trees.
> 
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Tested-by: Andreas Färber <afaerber@suse.de>
> ---
> Changes since v1:
>  - remove 'pinctrl-' prefix for pinctrl sub-nodes
>  - separate config and mux nodes
> 
> Changes since RFC v2:
>  - add pinconf properties to zc702 mdio node
>  - remove arguments from bias-related props
> 
> Changes since RFC v1:
>  - separate DT changes into their own patch
> ---
>  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
>  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
>  3 files changed, 340 insertions(+), 1 deletion(-)
[...]
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index 280f02dd4ddc..4995412f116f 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
[...]
> @@ -50,15 +52,24 @@
>  	status = "okay";
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethernet_phy>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gem0_default>;
>  
>  	ethernet_phy: ethernet-phy@7 {
>  		reg = <7>;
>  	};
>  };
>  
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio0_default>;

On linux-next the equivalent no longer works for the Parallella, with
gpio failing to probe.

If I move these two properties to the leds node (for which I am
configuring gpio 7) then I get a heartbeat as before.

Regards,
Andreas

> +};
> +
>  &i2c0 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c0_default>;
>  
>  	i2cswitch@74 {
>  		compatible = "nxp,pca9548";
> @@ -132,10 +143,180 @@
>  	};
>  };
>  
> +&pinctrl0 {
[...]
> +	pinctrl_gpio0_default: gpio0-default {
> +		mux {
> +			function = "gpio0";
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +		};
> +
> +		conf {
> +			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> +				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> +				 "gpio0_13_grp", "gpio0_14_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-pull-up {
> +			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
> +			bias-pull-up;
> +		};
> +
> +		conf-pull-none {
> +			pins = "MIO7", "MIO8";
> +			bias-disable;
> +		};
> +	};
[...]
> +};
> +
>  &sdhci0 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sdhci0_default>;
>  };
>  
>  &uart1 {
>  	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1_default>;
>  };
[dito for zc706]

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu,
Graham Norton; HRB 21284 (AG Nürnberg)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

Moving this away from the gpio node seems wrong. IMHO, it should be
where it is. I guess, there might be some issues with probe
ordering/deferral that we may have to sort out.

	Sören

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas F?rber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas F?rber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy at 7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

Moving this away from the gpio node seems wrong. IMHO, it should be
where it is. I guess, there might be some issues with probe
ordering/deferral that we may have to sort out.

	S?ren

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

Moving this away from the gpio node seems wrong. IMHO, it should be
where it is. I guess, there might be some issues with probe
ordering/deferral that we may have to sort out.

	Sören

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

Moving this away from the gpio node seems wrong. IMHO, it should be
where it is. I guess, there might be some issues with probe
ordering/deferral that we may have to sort out.

	Sören

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

I think for USB I have a fix (see other email with patch), but LEDs seem
to be broken too. On my zc702 I get:
   of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ds23[0]' - status (-517)

517 is probe deferral. Looks like the LED driver needs to learn to defer
probing when the GPIO driver isn't available yet.

	Sören

[PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas F?rber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas F?rber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy at 7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

I think for USB I have a fix (see other email with patch), but LEDs seem
to be broken too. On my zc702 I get:
   of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ds23[0]' - status (-517)

517 is probe deferral. Looks like the LED driver needs to learn to defer
probing when the GPIO driver isn't available yet.

	S?ren

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

I think for USB I have a fix (see other email with patch), but LEDs seem
to be broken too. On my zc702 I get:
   of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ds23[0]' - status (-517)

517 is probe deferral. Looks like the LED driver needs to learn to defer
probing when the GPIO driver isn't available yet.

	Sören

Re: [PATCH v4 6/7] ARM: zynq: DT: Add pinctrl information

[Sören Brinkmann]

On Tue, 2015-01-27 at 12:57AM +0100, Andreas Färber wrote:
> Am 09.01.2015 um 16:43 schrieb Soren Brinkmann:
> > Add pinctrl descriptions to the zc702 and zc706 device trees.
> > 
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> > Tested-by: Andreas Färber <afaerber@suse.de>
> > ---
> > Changes since v1:
> >  - remove 'pinctrl-' prefix for pinctrl sub-nodes
> >  - separate config and mux nodes
> > 
> > Changes since RFC v2:
> >  - add pinconf properties to zc702 mdio node
> >  - remove arguments from bias-related props
> > 
> > Changes since RFC v1:
> >  - separate DT changes into their own patch
> > ---
> >  arch/arm/boot/dts/zynq-7000.dtsi |   8 +-
> >  arch/arm/boot/dts/zynq-zc702.dts | 181 +++++++++++++++++++++++++++++++++++++++
> >  arch/arm/boot/dts/zynq-zc706.dts | 152 ++++++++++++++++++++++++++++++++
> >  3 files changed, 340 insertions(+), 1 deletion(-)
> [...]
> > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> > index 280f02dd4ddc..4995412f116f 100644
> > --- a/arch/arm/boot/dts/zynq-zc702.dts
> > +++ b/arch/arm/boot/dts/zynq-zc702.dts
> [...]
> > @@ -50,15 +52,24 @@
> >  	status = "okay";
> >  	phy-mode = "rgmii-id";
> >  	phy-handle = <&ethernet_phy>;
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gem0_default>;
> >  
> >  	ethernet_phy: ethernet-phy@7 {
> >  		reg = <7>;
> >  	};
> >  };
> >  
> > +&gpio0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_gpio0_default>;
> 
> On linux-next the equivalent no longer works for the Parallella, with
> gpio failing to probe.
> 
> If I move these two properties to the leds node (for which I am
> configuring gpio 7) then I get a heartbeat as before.

I think for USB I have a fix (see other email with patch), but LEDs seem
to be broken too. On my zc702 I get:
   of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/ds23[0]' - status (-517)

517 is probe deferral. Looks like the LED driver needs to learn to defer
probing when the GPIO driver isn't available yet.

	Sören

[PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Soren Brinkmann]

Instead of the driver caring about implementation details like device
tree, just provide information about driver specific pinconf parameters
to pinconf-generic which takes care of parsing the DT.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
Changes since v2:
 - remove hyphens in 'pull-up-strength' debugfs representation.
 - driver-specific DT properties are passed to the core in two arrays,
   one for the actual DT parsing one for the debugfs representation.
   Issue a compiler warning when the number of entries is not the same
   for both arrays.

This is compile tested only. So, it's likely that it needs more tweaking
to make it actually work on HW. But it illustrates the potential
benefits of the pinconf-generic changes in this series.
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +++----------------------------
 1 file changed, 11 insertions(+), 114 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index b863b5080890..17f811c9c2c0 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -131,14 +131,14 @@ struct pmic_gpio_state {
 	struct gpio_chip chip;
 };
 
-struct pmic_gpio_bindings {
-	const char	*property;
-	unsigned	param;
+static const struct pinconf_generic_dt_params pmic_gpio_bindings[] = {
+	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP,		0},
+	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH,	0},
 };
 
-static struct pmic_gpio_bindings pmic_gpio_bindings[] = {
-	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP},
-	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH},
+static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = {
+	PCONFDUMP(PMIC_GPIO_CONF_PULL_UP,  "pull up strength", NULL, true),
+	PCONFDUMP(PMIC_GPIO_CONF_STRENGTH, "drive-strength", NULL, true),
 };
 
 static const char *const pmic_gpio_groups[] = {
@@ -209,118 +209,11 @@ static int pmic_gpio_get_group_pins(struct pinctrl_dev *pctldev, unsigned pin,
 	return 0;
 }
 
-static int pmic_gpio_parse_dt_config(struct device_node *np,
-				     struct pinctrl_dev *pctldev,
-				     unsigned long **configs,
-				     unsigned int *nconfs)
-{
-	struct pmic_gpio_bindings *par;
-	unsigned long cfg;
-	int ret, i;
-	u32 val;
-
-	for (i = 0; i < ARRAY_SIZE(pmic_gpio_bindings); i++) {
-		par = &pmic_gpio_bindings[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret = -EINVAL)
-			continue;
-
-		/* use zero as default value */
-		if (ret)
-			val = 0;
-
-		dev_dbg(pctldev->dev, "found %s with value %u\n",
-			par->property, val);
-
-		cfg = pinconf_to_config_packed(par->param, val);
-
-		ret = pinctrl_utils_add_config(pctldev, configs, nconfs, cfg);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int pmic_gpio_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-				       struct device_node *np,
-				       struct pinctrl_map **map,
-				       unsigned *reserv, unsigned *nmaps,
-				       enum pinctrl_map_type type)
-{
-	unsigned long *configs = NULL;
-	unsigned nconfs = 0;
-	struct property *prop;
-	const char *group;
-	int ret;
-
-	ret = pmic_gpio_parse_dt_config(np, pctldev, &configs, &nconfs);
-	if (ret < 0)
-		return ret;
-
-	if (!nconfs)
-		return 0;
-
-	ret = of_property_count_strings(np, "pins");
-	if (ret < 0)
-		goto exit;
-
-	ret = pinctrl_utils_reserve_map(pctldev, map, reserv, nmaps, ret);
-	if (ret < 0)
-		goto exit;
-
-	of_property_for_each_string(np, "pins", prop, group) {
-		ret = pinctrl_utils_add_map_configs(pctldev, map,
-						    reserv, nmaps, group,
-						    configs, nconfs, type);
-		if (ret < 0)
-			break;
-	}
-exit:
-	kfree(configs);
-	return ret;
-}
-
-static int pmic_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
-				    struct device_node *np_config,
-				    struct pinctrl_map **map, unsigned *nmaps)
-{
-	enum pinctrl_map_type type;
-	struct device_node *np;
-	unsigned reserv;
-	int ret;
-
-	ret = 0;
-	*map = NULL;
-	*nmaps = 0;
-	reserv = 0;
-	type = PIN_MAP_TYPE_CONFIGS_GROUP;
-
-	for_each_child_of_node(np_config, np) {
-		ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
-							&reserv, nmaps, type);
-		if (ret)
-			break;
-
-		ret = pmic_gpio_dt_subnode_to_map(pctldev, np, map, &reserv,
-						  nmaps, type);
-		if (ret)
-			break;
-	}
-
-	if (ret < 0)
-		pinctrl_utils_dt_free_map(pctldev, *map, *nmaps);
-
-	return ret;
-}
-
 static const struct pinctrl_ops pmic_gpio_pinctrl_ops = {
 	.get_groups_count	= pmic_gpio_get_groups_count,
 	.get_group_name		= pmic_gpio_get_group_name,
 	.get_group_pins		= pmic_gpio_get_group_pins,
-	.dt_node_to_map		= pmic_gpio_dt_node_to_map,
+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group,
 	.dt_free_map		= pinctrl_utils_dt_free_map,
 };
 
@@ -590,6 +483,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
 }
 
 static const struct pinconf_ops pmic_gpio_pinconf_ops = {
+	.is_generic			= true,
 	.pin_config_group_get		= pmic_gpio_config_get,
 	.pin_config_group_set		= pmic_gpio_config_set,
 	.pin_config_group_dbg_show	= pmic_gpio_config_dbg_show,
@@ -848,6 +742,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	pctrldesc->name = dev_name(dev);
 	pctrldesc->pins = pindesc;
 	pctrldesc->npins = npins;
+	pctrldesc->num_dt_params = ARRAY_SIZE(pmic_gpio_bindings);
+	pctrldesc->params = pmic_gpio_bindings;
+	pctrldesc->conf_items = pmic_conf_items;
 
 	for (i = 0; i < npins; i++, pindesc++) {
 		pad = &pads[i];
-- 
2.2.1.1.gb42cc81

[PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Soren Brinkmann]

Instead of the driver caring about implementation details like device
tree, just provide information about driver specific pinconf parameters
to pinconf-generic which takes care of parsing the DT.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
Changes since v2:
 - remove hyphens in 'pull-up-strength' debugfs representation.
 - driver-specific DT properties are passed to the core in two arrays,
   one for the actual DT parsing one for the debugfs representation.
   Issue a compiler warning when the number of entries is not the same
   for both arrays.

This is compile tested only. So, it's likely that it needs more tweaking
to make it actually work on HW. But it illustrates the potential
benefits of the pinconf-generic changes in this series.
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +++----------------------------
 1 file changed, 11 insertions(+), 114 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index b863b5080890..17f811c9c2c0 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -131,14 +131,14 @@ struct pmic_gpio_state {
 	struct gpio_chip chip;
 };
 
-struct pmic_gpio_bindings {
-	const char	*property;
-	unsigned	param;
+static const struct pinconf_generic_dt_params pmic_gpio_bindings[] = {
+	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP,		0},
+	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH,	0},
 };
 
-static struct pmic_gpio_bindings pmic_gpio_bindings[] = {
-	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP},
-	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH},
+static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = {
+	PCONFDUMP(PMIC_GPIO_CONF_PULL_UP,  "pull up strength", NULL, true),
+	PCONFDUMP(PMIC_GPIO_CONF_STRENGTH, "drive-strength", NULL, true),
 };
 
 static const char *const pmic_gpio_groups[] = {
@@ -209,118 +209,11 @@ static int pmic_gpio_get_group_pins(struct pinctrl_dev *pctldev, unsigned pin,
 	return 0;
 }
 
-static int pmic_gpio_parse_dt_config(struct device_node *np,
-				     struct pinctrl_dev *pctldev,
-				     unsigned long **configs,
-				     unsigned int *nconfs)
-{
-	struct pmic_gpio_bindings *par;
-	unsigned long cfg;
-	int ret, i;
-	u32 val;
-
-	for (i = 0; i < ARRAY_SIZE(pmic_gpio_bindings); i++) {
-		par = &pmic_gpio_bindings[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret == -EINVAL)
-			continue;
-
-		/* use zero as default value */
-		if (ret)
-			val = 0;
-
-		dev_dbg(pctldev->dev, "found %s with value %u\n",
-			par->property, val);
-
-		cfg = pinconf_to_config_packed(par->param, val);
-
-		ret = pinctrl_utils_add_config(pctldev, configs, nconfs, cfg);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int pmic_gpio_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-				       struct device_node *np,
-				       struct pinctrl_map **map,
-				       unsigned *reserv, unsigned *nmaps,
-				       enum pinctrl_map_type type)
-{
-	unsigned long *configs = NULL;
-	unsigned nconfs = 0;
-	struct property *prop;
-	const char *group;
-	int ret;
-
-	ret = pmic_gpio_parse_dt_config(np, pctldev, &configs, &nconfs);
-	if (ret < 0)
-		return ret;
-
-	if (!nconfs)
-		return 0;
-
-	ret = of_property_count_strings(np, "pins");
-	if (ret < 0)
-		goto exit;
-
-	ret = pinctrl_utils_reserve_map(pctldev, map, reserv, nmaps, ret);
-	if (ret < 0)
-		goto exit;
-
-	of_property_for_each_string(np, "pins", prop, group) {
-		ret = pinctrl_utils_add_map_configs(pctldev, map,
-						    reserv, nmaps, group,
-						    configs, nconfs, type);
-		if (ret < 0)
-			break;
-	}
-exit:
-	kfree(configs);
-	return ret;
-}
-
-static int pmic_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
-				    struct device_node *np_config,
-				    struct pinctrl_map **map, unsigned *nmaps)
-{
-	enum pinctrl_map_type type;
-	struct device_node *np;
-	unsigned reserv;
-	int ret;
-
-	ret = 0;
-	*map = NULL;
-	*nmaps = 0;
-	reserv = 0;
-	type = PIN_MAP_TYPE_CONFIGS_GROUP;
-
-	for_each_child_of_node(np_config, np) {
-		ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
-							&reserv, nmaps, type);
-		if (ret)
-			break;
-
-		ret = pmic_gpio_dt_subnode_to_map(pctldev, np, map, &reserv,
-						  nmaps, type);
-		if (ret)
-			break;
-	}
-
-	if (ret < 0)
-		pinctrl_utils_dt_free_map(pctldev, *map, *nmaps);
-
-	return ret;
-}
-
 static const struct pinctrl_ops pmic_gpio_pinctrl_ops = {
 	.get_groups_count	= pmic_gpio_get_groups_count,
 	.get_group_name		= pmic_gpio_get_group_name,
 	.get_group_pins		= pmic_gpio_get_group_pins,
-	.dt_node_to_map		= pmic_gpio_dt_node_to_map,
+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group,
 	.dt_free_map		= pinctrl_utils_dt_free_map,
 };
 
@@ -590,6 +483,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
 }
 
 static const struct pinconf_ops pmic_gpio_pinconf_ops = {
+	.is_generic			= true,
 	.pin_config_group_get		= pmic_gpio_config_get,
 	.pin_config_group_set		= pmic_gpio_config_set,
 	.pin_config_group_dbg_show	= pmic_gpio_config_dbg_show,
@@ -848,6 +742,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	pctrldesc->name = dev_name(dev);
 	pctrldesc->pins = pindesc;
 	pctrldesc->npins = npins;
+	pctrldesc->num_dt_params = ARRAY_SIZE(pmic_gpio_bindings);
+	pctrldesc->params = pmic_gpio_bindings;
+	pctrldesc->conf_items = pmic_conf_items;
 
 	for (i = 0; i < npins; i++, pindesc++) {
 		pad = &pads[i];
-- 
2.2.1.1.gb42cc81

[PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Soren Brinkmann]

Instead of the driver caring about implementation details like device
tree, just provide information about driver specific pinconf parameters
to pinconf-generic which takes care of parsing the DT.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
Changes since v2:
 - remove hyphens in 'pull-up-strength' debugfs representation.
 - driver-specific DT properties are passed to the core in two arrays,
   one for the actual DT parsing one for the debugfs representation.
   Issue a compiler warning when the number of entries is not the same
   for both arrays.

This is compile tested only. So, it's likely that it needs more tweaking
to make it actually work on HW. But it illustrates the potential
benefits of the pinconf-generic changes in this series.
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +++----------------------------
 1 file changed, 11 insertions(+), 114 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index b863b5080890..17f811c9c2c0 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -131,14 +131,14 @@ struct pmic_gpio_state {
 	struct gpio_chip chip;
 };
 
-struct pmic_gpio_bindings {
-	const char	*property;
-	unsigned	param;
+static const struct pinconf_generic_dt_params pmic_gpio_bindings[] = {
+	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP,		0},
+	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH,	0},
 };
 
-static struct pmic_gpio_bindings pmic_gpio_bindings[] = {
-	{"qcom,pull-up-strength",	PMIC_GPIO_CONF_PULL_UP},
-	{"qcom,drive-strength",		PMIC_GPIO_CONF_STRENGTH},
+static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = {
+	PCONFDUMP(PMIC_GPIO_CONF_PULL_UP,  "pull up strength", NULL, true),
+	PCONFDUMP(PMIC_GPIO_CONF_STRENGTH, "drive-strength", NULL, true),
 };
 
 static const char *const pmic_gpio_groups[] = {
@@ -209,118 +209,11 @@ static int pmic_gpio_get_group_pins(struct pinctrl_dev *pctldev, unsigned pin,
 	return 0;
 }
 
-static int pmic_gpio_parse_dt_config(struct device_node *np,
-				     struct pinctrl_dev *pctldev,
-				     unsigned long **configs,
-				     unsigned int *nconfs)
-{
-	struct pmic_gpio_bindings *par;
-	unsigned long cfg;
-	int ret, i;
-	u32 val;
-
-	for (i = 0; i < ARRAY_SIZE(pmic_gpio_bindings); i++) {
-		par = &pmic_gpio_bindings[i];
-		ret = of_property_read_u32(np, par->property, &val);
-
-		/* property not found */
-		if (ret == -EINVAL)
-			continue;
-
-		/* use zero as default value */
-		if (ret)
-			val = 0;
-
-		dev_dbg(pctldev->dev, "found %s with value %u\n",
-			par->property, val);
-
-		cfg = pinconf_to_config_packed(par->param, val);
-
-		ret = pinctrl_utils_add_config(pctldev, configs, nconfs, cfg);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int pmic_gpio_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-				       struct device_node *np,
-				       struct pinctrl_map **map,
-				       unsigned *reserv, unsigned *nmaps,
-				       enum pinctrl_map_type type)
-{
-	unsigned long *configs = NULL;
-	unsigned nconfs = 0;
-	struct property *prop;
-	const char *group;
-	int ret;
-
-	ret = pmic_gpio_parse_dt_config(np, pctldev, &configs, &nconfs);
-	if (ret < 0)
-		return ret;
-
-	if (!nconfs)
-		return 0;
-
-	ret = of_property_count_strings(np, "pins");
-	if (ret < 0)
-		goto exit;
-
-	ret = pinctrl_utils_reserve_map(pctldev, map, reserv, nmaps, ret);
-	if (ret < 0)
-		goto exit;
-
-	of_property_for_each_string(np, "pins", prop, group) {
-		ret = pinctrl_utils_add_map_configs(pctldev, map,
-						    reserv, nmaps, group,
-						    configs, nconfs, type);
-		if (ret < 0)
-			break;
-	}
-exit:
-	kfree(configs);
-	return ret;
-}
-
-static int pmic_gpio_dt_node_to_map(struct pinctrl_dev *pctldev,
-				    struct device_node *np_config,
-				    struct pinctrl_map **map, unsigned *nmaps)
-{
-	enum pinctrl_map_type type;
-	struct device_node *np;
-	unsigned reserv;
-	int ret;
-
-	ret = 0;
-	*map = NULL;
-	*nmaps = 0;
-	reserv = 0;
-	type = PIN_MAP_TYPE_CONFIGS_GROUP;
-
-	for_each_child_of_node(np_config, np) {
-		ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
-							&reserv, nmaps, type);
-		if (ret)
-			break;
-
-		ret = pmic_gpio_dt_subnode_to_map(pctldev, np, map, &reserv,
-						  nmaps, type);
-		if (ret)
-			break;
-	}
-
-	if (ret < 0)
-		pinctrl_utils_dt_free_map(pctldev, *map, *nmaps);
-
-	return ret;
-}
-
 static const struct pinctrl_ops pmic_gpio_pinctrl_ops = {
 	.get_groups_count	= pmic_gpio_get_groups_count,
 	.get_group_name		= pmic_gpio_get_group_name,
 	.get_group_pins		= pmic_gpio_get_group_pins,
-	.dt_node_to_map		= pmic_gpio_dt_node_to_map,
+	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group,
 	.dt_free_map		= pinctrl_utils_dt_free_map,
 };
 
@@ -590,6 +483,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
 }
 
 static const struct pinconf_ops pmic_gpio_pinconf_ops = {
+	.is_generic			= true,
 	.pin_config_group_get		= pmic_gpio_config_get,
 	.pin_config_group_set		= pmic_gpio_config_set,
 	.pin_config_group_dbg_show	= pmic_gpio_config_dbg_show,
@@ -848,6 +742,9 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 	pctrldesc->name = dev_name(dev);
 	pctrldesc->pins = pindesc;
 	pctrldesc->npins = npins;
+	pctrldesc->num_dt_params = ARRAY_SIZE(pmic_gpio_bindings);
+	pctrldesc->params = pmic_gpio_bindings;
+	pctrldesc->conf_items = pmic_conf_items;
 
 	for (i = 0; i < npins; i++, pindesc++) {
 		pad = &pads[i];
-- 
2.2.1.1.gb42cc81

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Instead of the driver caring about implementation details like device
> tree, just provide information about driver specific pinconf parameters
> to pinconf-generic which takes care of parsing the DT.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Patch applied: qualcomm folks, can you make sure that the Qualcomm
stuff is still working as expected with Sören's core parser?

Yours,
Linus Walleij

[PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Instead of the driver caring about implementation details like device
> tree, just provide information about driver specific pinconf parameters
> to pinconf-generic which takes care of parsing the DT.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Patch applied: qualcomm folks, can you make sure that the Qualcomm
stuff is still working as expected with S?ren's core parser?

Yours,
Linus Walleij

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Instead of the driver caring about implementation details like device
> tree, just provide information about driver specific pinconf parameters
> to pinconf-generic which takes care of parsing the DT.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Patch applied: qualcomm folks, can you make sure that the Qualcomm
stuff is still working as expected with Sören's core parser?

Yours,
Linus Walleij

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Linus Walleij]

On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Instead of the driver caring about implementation details like device
> tree, just provide information about driver specific pinconf parameters
> to pinconf-generic which takes care of parsing the DT.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Patch applied: qualcomm folks, can you make sure that the Qualcomm
stuff is still working as expected with Sören's core parser?

Yours,
Linus Walleij

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Ivan T. Ivanov]

On Sun, 2015-01-11 at 22:40 +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> brinkmann@xilinx.com> wrote:
> 
> > Instead of the driver caring about implementation details like device
> > tree, just provide information about driver specific pinconf parameters
> > to pinconf-generic which takes care of parsing the DT.
> > 
> > Signed-off-by: Soren Brinkmann brinkmann@xilinx.com>
> 
> Patch applied: qualcomm folks, can you make sure that the Qualcomm
> stuff is still working as expected with Sören's core parser?
> 

Yep, it still works. Tested on pm8941 and pma8084. Thanks.

Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>

[PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Ivan T. Ivanov]

On Sun, 2015-01-11 at 22:40 +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> brinkmann at xilinx.com> wrote:
> 
> > Instead of the driver caring about implementation details like device
> > tree, just provide information about driver specific pinconf parameters
> > to pinconf-generic which takes care of parsing the DT.
> > 
> > Signed-off-by: Soren Brinkmann brinkmann at xilinx.com>
> 
> Patch applied: qualcomm folks, can you make sure that the Qualcomm
> stuff is still working as expected with S?ren's core parser?
> 

Yep, it still works. Tested on pm8941 and pma8084. Thanks.

Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Ivan T. Ivanov]

On Sun, 2015-01-11 at 22:40 +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> brinkmann@xilinx.com> wrote:
> 
> > Instead of the driver caring about implementation details like device
> > tree, just provide information about driver specific pinconf parameters
> > to pinconf-generic which takes care of parsing the DT.
> > 
> > Signed-off-by: Soren Brinkmann brinkmann@xilinx.com>
> 
> Patch applied: qualcomm folks, can you make sure that the Qualcomm
> stuff is still working as expected with Sören's core parser?
> 

Yep, it still works. Tested on pm8941 and pma8084. Thanks.

Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>

Re: [PATCH v4 7/7] pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

[Ivan T. Ivanov]

On Sun, 2015-01-11 at 22:40 +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
> brinkmann@xilinx.com> wrote:
> 
> > Instead of the driver caring about implementation details like device
> > tree, just provide information about driver specific pinconf parameters
> > to pinconf-generic which takes care of parsing the DT.
> > 
> > Signed-off-by: Soren Brinkmann brinkmann@xilinx.com>
> 
> Patch applied: qualcomm folks, can you make sure that the Qualcomm
> stuff is still working as expected with Sören's core parser?
> 

Yep, it still works. Tested on pm8941 and pma8084. Thanks.

Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> Hi Linus,
> 
> I rebased my branch onto your current pinctrl/devel. Other than that
> this should be exactly what has been sent out as v3. This time I'll use
> the gmail SMTP again, which hopefully resolves the encoding issue.

The transfer-encoding is again 'quoted-printable'. So, seems it is not
exchange to blame. I tried to git am a patch from this series and it
seems to work fine. I.e. send-email and am apparently to the right
thing.
Let me know if that doesn't work for you. In that case I might have to
get rid of all non-ascii characters (quite sad, given that it's already
2015 and things like this still don't work right away).

	Sören

[PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> Hi Linus,
> 
> I rebased my branch onto your current pinctrl/devel. Other than that
> this should be exactly what has been sent out as v3. This time I'll use
> the gmail SMTP again, which hopefully resolves the encoding issue.

The transfer-encoding is again 'quoted-printable'. So, seems it is not
exchange to blame. I tried to git am a patch from this series and it
seems to work fine. I.e. send-email and am apparently to the right
thing.
Let me know if that doesn't work for you. In that case I might have to
get rid of all non-ascii characters (quite sad, given that it's already
2015 and things like this still don't work right away).

	S?ren

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> Hi Linus,
> 
> I rebased my branch onto your current pinctrl/devel. Other than that
> this should be exactly what has been sent out as v3. This time I'll use
> the gmail SMTP again, which hopefully resolves the encoding issue.

The transfer-encoding is again 'quoted-printable'. So, seems it is not
exchange to blame. I tried to git am a patch from this series and it
seems to work fine. I.e. send-email and am apparently to the right
thing.
Let me know if that doesn't work for you. In that case I might have to
get rid of all non-ascii characters (quite sad, given that it's already
2015 and things like this still don't work right away).

	Sören

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> Hi Linus,
> 
> I rebased my branch onto your current pinctrl/devel. Other than that
> this should be exactly what has been sent out as v3. This time I'll use
> the gmail SMTP again, which hopefully resolves the encoding issue.

The transfer-encoding is again 'quoted-printable'. So, seems it is not
exchange to blame. I tried to git am a patch from this series and it
seems to work fine. I.e. send-email and am apparently to the right
thing.
Let me know if that doesn't work for you. In that case I might have to
get rid of all non-ascii characters (quite sad, given that it's already
2015 and things like this still don't work right away).

	Sören

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Linus Walleij]

On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
>> Hi Linus,
>>
>> I rebased my branch onto your current pinctrl/devel. Other than that
>> this should be exactly what has been sent out as v3. This time I'll use
>> the gmail SMTP again, which hopefully resolves the encoding issue.
>
> The transfer-encoding is again 'quoted-printable'. So, seems it is not
> exchange to blame. I tried to git am a patch from this series and it
> seems to work fine. I.e. send-email and am apparently to the right
> thing.

Yeah it works like a charm :)

All patches that affect the pin control tree are applied now. It is
looking *beautiful* especially your device trees look exactly as I
want them to look for a group/function type pin controller driver.

Yours,
Linus Walleij

[PATCH v4 0/7] pinctrl support for Zynq

[Linus Walleij]

On Fri, Jan 9, 2015 at 5:53 PM, S?ren Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
>> Hi Linus,
>>
>> I rebased my branch onto your current pinctrl/devel. Other than that
>> this should be exactly what has been sent out as v3. This time I'll use
>> the gmail SMTP again, which hopefully resolves the encoding issue.
>
> The transfer-encoding is again 'quoted-printable'. So, seems it is not
> exchange to blame. I tried to git am a patch from this series and it
> seems to work fine. I.e. send-email and am apparently to the right
> thing.

Yeah it works like a charm :)

All patches that affect the pin control tree are applied now. It is
looking *beautiful* especially your device trees look exactly as I
want them to look for a group/function type pin controller driver.

Yours,
Linus Walleij

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Linus Walleij]

On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
>> Hi Linus,
>>
>> I rebased my branch onto your current pinctrl/devel. Other than that
>> this should be exactly what has been sent out as v3. This time I'll use
>> the gmail SMTP again, which hopefully resolves the encoding issue.
>
> The transfer-encoding is again 'quoted-printable'. So, seems it is not
> exchange to blame. I tried to git am a patch from this series and it
> seems to work fine. I.e. send-email and am apparently to the right
> thing.

Yeah it works like a charm :)

All patches that affect the pin control tree are applied now. It is
looking *beautiful* especially your device trees look exactly as I
want them to look for a group/function type pin controller driver.

Yours,
Linus Walleij

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Linus Walleij]

On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
>> Hi Linus,
>>
>> I rebased my branch onto your current pinctrl/devel. Other than that
>> this should be exactly what has been sent out as v3. This time I'll use
>> the gmail SMTP again, which hopefully resolves the encoding issue.
>
> The transfer-encoding is again 'quoted-printable'. So, seems it is not
> exchange to blame. I tried to git am a patch from this series and it
> seems to work fine. I.e. send-email and am apparently to the right
> thing.

Yeah it works like a charm :)

All patches that affect the pin control tree are applied now. It is
looking *beautiful* especially your device trees look exactly as I
want them to look for a group/function type pin controller driver.

Yours,
Linus Walleij

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Sun, 2015-01-11 at 10:41PM +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> > On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> >> Hi Linus,
> >>
> >> I rebased my branch onto your current pinctrl/devel. Other than that
> >> this should be exactly what has been sent out as v3. This time I'll use
> >> the gmail SMTP again, which hopefully resolves the encoding issue.
> >
> > The transfer-encoding is again 'quoted-printable'. So, seems it is not
> > exchange to blame. I tried to git am a patch from this series and it
> > seems to work fine. I.e. send-email and am apparently to the right
> > thing.
> 
> Yeah it works like a charm :)
> 
> All patches that affect the pin control tree are applied now. It is
> looking *beautiful* especially your device trees look exactly as I
> want them to look for a group/function type pin controller driver.

Thanks a lot! This is great.

@Michal: Could you please pick up the patches that go through the armsoc
tree (5 and 6 in this series)?

	Thanks,
	Sören

[PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Sun, 2015-01-11 at 10:41PM +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 5:53 PM, S?ren Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> > On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> >> Hi Linus,
> >>
> >> I rebased my branch onto your current pinctrl/devel. Other than that
> >> this should be exactly what has been sent out as v3. This time I'll use
> >> the gmail SMTP again, which hopefully resolves the encoding issue.
> >
> > The transfer-encoding is again 'quoted-printable'. So, seems it is not
> > exchange to blame. I tried to git am a patch from this series and it
> > seems to work fine. I.e. send-email and am apparently to the right
> > thing.
> 
> Yeah it works like a charm :)
> 
> All patches that affect the pin control tree are applied now. It is
> looking *beautiful* especially your device trees look exactly as I
> want them to look for a group/function type pin controller driver.

Thanks a lot! This is great.

@Michal: Could you please pick up the patches that go through the armsoc
tree (5 and 6 in this series)?

	Thanks,
	S?ren

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Sun, 2015-01-11 at 10:41PM +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> > On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> >> Hi Linus,
> >>
> >> I rebased my branch onto your current pinctrl/devel. Other than that
> >> this should be exactly what has been sent out as v3. This time I'll use
> >> the gmail SMTP again, which hopefully resolves the encoding issue.
> >
> > The transfer-encoding is again 'quoted-printable'. So, seems it is not
> > exchange to blame. I tried to git am a patch from this series and it
> > seems to work fine. I.e. send-email and am apparently to the right
> > thing.
> 
> Yeah it works like a charm :)
> 
> All patches that affect the pin control tree are applied now. It is
> looking *beautiful* especially your device trees look exactly as I
> want them to look for a group/function type pin controller driver.

Thanks a lot! This is great.

@Michal: Could you please pick up the patches that go through the armsoc
tree (5 and 6 in this series)?

	Thanks,
	Sören

Re: [PATCH v4 0/7] pinctrl support for Zynq

[Sören Brinkmann]

On Sun, 2015-01-11 at 10:41PM +0100, Linus Walleij wrote:
> On Fri, Jan 9, 2015 at 5:53 PM, Sören Brinkmann
> <soren.brinkmann@xilinx.com> wrote:
> > On Fri, 2015-01-09 at 07:43AM -0800, Soren Brinkmann wrote:
> >> Hi Linus,
> >>
> >> I rebased my branch onto your current pinctrl/devel. Other than that
> >> this should be exactly what has been sent out as v3. This time I'll use
> >> the gmail SMTP again, which hopefully resolves the encoding issue.
> >
> > The transfer-encoding is again 'quoted-printable'. So, seems it is not
> > exchange to blame. I tried to git am a patch from this series and it
> > seems to work fine. I.e. send-email and am apparently to the right
> > thing.
> 
> Yeah it works like a charm :)
> 
> All patches that affect the pin control tree are applied now. It is
> looking *beautiful* especially your device trees look exactly as I
> want them to look for a group/function type pin controller driver.

Thanks a lot! This is great.

@Michal: Could you please pick up the patches that go through the armsoc
tree (5 and 6 in this series)?

	Thanks,
	Sören