[alsa-devel] [PATCH v3 0/4] Sound support for Exynos4412 Trats2 board

[alsa-devel] [PATCH v3 0/4] Sound support for Exynos4412 Trats2 board

[Inha Song]

This patch-set adds basic sound support for the Trats2 boards.
It just support primary I2s and external speaker playback.

Changes in v3:
  - Set clock out parent to XUSBXTI in pmu_system_controller DT node.

Changes in v2:
  - Remove unnecessary lines in Trats2 machine driver
  - move clock enable/disable to .startup / .shutdown
  - Fix code style issues
  - Remove mclk DT property in Trats2 sound and add MCLK1 property in WM1811 node.
    (MCLK1 is optional property in WM8994 node - refer: Document/devicetree/bindings/sound/wm8994.txt)
  - Use mclk that defined in WM1811 DT node.
  - Add "samsung,audio-codec" property to required properties.

Inha Song (4):
  ASoC: samsung: Add machine driver for Trats2
  ASoC: samsung: Document Trats2 audio subsystem bindings
  ARM: dts: set clock out parent to XUSBXTI
  ARM: dts: Add sound nodes for exynos4412-trats2

 .../bindings/sound/samsung,trats2-wm1811.txt       |  25 +++
 arch/arm/boot/dts/exynos4.dtsi                     |   2 +
 arch/arm/boot/dts/exynos4412-trats2.dts            |  37 ++++
 sound/soc/samsung/Kconfig                          |   8 +
 sound/soc/samsung/Makefile                         |   2 +
 sound/soc/samsung/trats2_wm1811.c                  | 218 +++++++++++++++++++++
 6 files changed, 292 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
 create mode 100644 sound/soc/samsung/trats2_wm1811.c

-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 0/4] Sound support for Exynos4412 Trats2 board

[Inha Song]

This patch-set adds basic sound support for the Trats2 boards.
It just support primary I2s and external speaker playback.

Changes in v3:
  - Set clock out parent to XUSBXTI in pmu_system_controller DT node.

Changes in v2:
  - Remove unnecessary lines in Trats2 machine driver
  - move clock enable/disable to .startup / .shutdown
  - Fix code style issues
  - Remove mclk DT property in Trats2 sound and add MCLK1 property in WM1811 node.
    (MCLK1 is optional property in WM8994 node - refer: Document/devicetree/bindings/sound/wm8994.txt)
  - Use mclk that defined in WM1811 DT node.
  - Add "samsung,audio-codec" property to required properties.

Inha Song (4):
  ASoC: samsung: Add machine driver for Trats2
  ASoC: samsung: Document Trats2 audio subsystem bindings
  ARM: dts: set clock out parent to XUSBXTI
  ARM: dts: Add sound nodes for exynos4412-trats2

 .../bindings/sound/samsung,trats2-wm1811.txt       |  25 +++
 arch/arm/boot/dts/exynos4.dtsi                     |   2 +
 arch/arm/boot/dts/exynos4412-trats2.dts            |  37 ++++
 sound/soc/samsung/Kconfig                          |   8 +
 sound/soc/samsung/Makefile                         |   2 +
 sound/soc/samsung/trats2_wm1811.c                  | 218 +++++++++++++++++++++
 6 files changed, 292 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
 create mode 100644 sound/soc/samsung/trats2_wm1811.c

-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 sound/soc/samsung/Kconfig         |   8 ++
 sound/soc/samsung/Makefile        |   2 +
 sound/soc/samsung/trats2_wm1811.c | 218 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+)
 create mode 100644 sound/soc/samsung/trats2_wm1811.c

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index fc67f97..8031423 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
         depends on SND_SOC_SAMSUNG
         select SND_SAMSUNG_I2S
         select SND_SOC_RT5631
+
+config SND_SOC_SAMSUNG_TRATS2_WM1811
+	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
+	depends on SND_SOC_SAMSUNG
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_I2S
+	help
+	  Say Y if you want to add support for SoC audio on the Tizen Trats2 board.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 31e3dba..e2b7b1b 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -46,6 +46,7 @@ snd-soc-littlemill-objs := littlemill.o
 snd-soc-bells-objs := bells.o
 snd-soc-odroidx2-max98090-objs := odroidx2_max98090.o
 snd-soc-arndale-rt5631-objs := arndale_rt5631.o
+snd-soc-trats2-wm1811-objs := trats2_wm1811.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -73,3 +74,4 @@ obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
 obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o
 obj-$(CONFIG_SND_SOC_ODROIDX2) += snd-soc-odroidx2-max98090.o
 obj-$(CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631) += snd-soc-arndale-rt5631.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_TRATS2_WM1811) += snd-soc-trats2-wm1811.o
diff --git a/sound/soc/samsung/trats2_wm1811.c b/sound/soc/samsung/trats2_wm1811.c
new file mode 100644
index 0000000..b937612
--- /dev/null
+++ b/sound/soc/samsung/trats2_wm1811.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include "i2s.h"
+#include "../codecs/wm8994.h"
+
+struct trats2_machine_priv {
+	struct clk *clk_mclk;
+};
+
+static struct trats2_machine_priv trats2_wm1811_priv;
+
+static const struct snd_kcontrol_new trats2_controls[] = {
+	SOC_DAPM_PIN_SWITCH("SPK"),
+};
+
+static const struct snd_soc_dapm_widget trats2_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("SPK", NULL),
+};
+
+static int trats2_aif1_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	unsigned int sysclk_rate;
+	unsigned int mclk_rate =
+			(unsigned int)clk_get_rate(priv->clk_mclk);
+	int ret;
+
+	/* SYSCLK must be greater than 4.096MHz */
+	if (params_rate(params) == 8000 || params_rate(params) == 11025)
+		sysclk_rate = params_rate(params) * 512;
+	else
+		sysclk_rate = params_rate(params) * 256;
+
+	/* Set the codec FLL1 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+				  mclk_rate, sysclk_rate);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set FLL1: %d\n", ret);
+		return ret;
+	}
+
+	/* Set the codec SYSCLK */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+				     sysclk_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int trats2_aif1_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk_mclk);
+	if (ret) {
+		dev_err(rtd->card->dev, "Failed to enable mclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void trats2_aif1_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+
+	clk_disable_unprepare(priv->clk_mclk);
+}
+
+static const struct snd_soc_ops trats2_aif1_ops = {
+	.startup = trats2_aif1_startup,
+	.shutdown = trats2_aif1_shutdown,
+	.hw_params = trats2_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link trats2_dai[] = {
+	{
+		.name		= "WM1811 AIF1",
+		.stream_name	= "Pri_Dai",
+		.codec_dai_name = "wm8994-aif1",
+		.codec_name	= "wm8994-codec",
+		.ops		= &trats2_aif1_ops,
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+	},
+};
+
+static struct snd_soc_card trats2_card = {
+	.owner			= THIS_MODULE,
+
+	.dai_link		= trats2_dai,
+	.num_links		= ARRAY_SIZE(trats2_dai),
+
+	.controls		= trats2_controls,
+	.num_controls		= ARRAY_SIZE(trats2_controls),
+	.dapm_widgets		= trats2_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(trats2_dapm_widgets),
+
+	.drvdata		= &trats2_wm1811_priv,
+};
+
+static int trats2_audio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct snd_soc_card *card = &trats2_card;
+	struct device_node *codec_node;
+	struct snd_soc_dai_link *dai_link = card->dai_link;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "of node is missing.\n");
+		return -ENODEV;
+	}
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_of_parse_card_name(card, "samsung,model");
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Card name is not provided\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "Audio routing is not provided\n");
+		return ret;
+	}
+
+	dai_link->cpu_of_node = of_parse_phandle(np,
+						 "samsung,i2s-controller", 0);
+	if (dai_link->cpu_of_node == NULL) {
+		dev_err(&pdev->dev, "i2s-controller property parse error\n");
+		return -EINVAL;
+	}
+
+	dai_link->platform_of_node = dai_link->cpu_of_node;
+
+	codec_node = of_parse_phandle(np, "samsung,audio-codec", 0);
+	if (codec_node == NULL) {
+		dev_err(&pdev->dev, "audio-codec property parse error\n");
+		return -EINVAL;
+	}
+
+	priv->clk_mclk =  of_clk_get_by_name(codec_node, "MCLK1");
+	if (IS_ERR(priv->clk_mclk)) {
+		dev_err(&pdev->dev, "Failed to get mclk clock\n");
+		of_node_put(codec_node);
+		return PTR_ERR(priv->clk_mclk);
+	}
+	of_node_put(codec_node);
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register card: %d\n", ret);
+		goto clk_put;
+	}
+	return 0;
+
+clk_put:
+	clk_put(priv->clk_mclk);
+	return ret;
+}
+
+static int trats2_audio_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+
+	clk_put(priv->clk_mclk);
+
+	return 0;
+}
+
+static const struct of_device_id trats2_audio_of_match[] = {
+	{ .compatible	= "samsung,trats2-audio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, trats2_audio_of_match);
+
+static struct platform_driver trats2_audio_driver = {
+	.driver = {
+		.name		= "trats2-audio",
+		.owner		= THIS_MODULE,
+		.pm		= &snd_soc_pm_ops,
+		.of_match_table	= trats2_audio_of_match,
+	},
+	.probe	= trats2_audio_probe,
+	.remove	= trats2_audio_remove,
+};
+
+module_platform_driver(trats2_audio_driver);
+
+MODULE_AUTHOR("Inha Song <ideal.song@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC Trats2 Audio Support");
+MODULE_LICENSE("GPL v2");
-- 
2.0.0.390.gcb682f8

[PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 sound/soc/samsung/Kconfig         |   8 ++
 sound/soc/samsung/Makefile        |   2 +
 sound/soc/samsung/trats2_wm1811.c | 218 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+)
 create mode 100644 sound/soc/samsung/trats2_wm1811.c

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index fc67f97..8031423 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
         depends on SND_SOC_SAMSUNG
         select SND_SAMSUNG_I2S
         select SND_SOC_RT5631
+
+config SND_SOC_SAMSUNG_TRATS2_WM1811
+	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
+	depends on SND_SOC_SAMSUNG
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_I2S
+	help
+	  Say Y if you want to add support for SoC audio on the Tizen Trats2 board.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 31e3dba..e2b7b1b 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -46,6 +46,7 @@ snd-soc-littlemill-objs := littlemill.o
 snd-soc-bells-objs := bells.o
 snd-soc-odroidx2-max98090-objs := odroidx2_max98090.o
 snd-soc-arndale-rt5631-objs := arndale_rt5631.o
+snd-soc-trats2-wm1811-objs := trats2_wm1811.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -73,3 +74,4 @@ obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
 obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o
 obj-$(CONFIG_SND_SOC_ODROIDX2) += snd-soc-odroidx2-max98090.o
 obj-$(CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631) += snd-soc-arndale-rt5631.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_TRATS2_WM1811) += snd-soc-trats2-wm1811.o
diff --git a/sound/soc/samsung/trats2_wm1811.c b/sound/soc/samsung/trats2_wm1811.c
new file mode 100644
index 0000000..b937612
--- /dev/null
+++ b/sound/soc/samsung/trats2_wm1811.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include "i2s.h"
+#include "../codecs/wm8994.h"
+
+struct trats2_machine_priv {
+	struct clk *clk_mclk;
+};
+
+static struct trats2_machine_priv trats2_wm1811_priv;
+
+static const struct snd_kcontrol_new trats2_controls[] = {
+	SOC_DAPM_PIN_SWITCH("SPK"),
+};
+
+static const struct snd_soc_dapm_widget trats2_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("SPK", NULL),
+};
+
+static int trats2_aif1_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	unsigned int sysclk_rate;
+	unsigned int mclk_rate =
+			(unsigned int)clk_get_rate(priv->clk_mclk);
+	int ret;
+
+	/* SYSCLK must be greater than 4.096MHz */
+	if (params_rate(params) == 8000 || params_rate(params) == 11025)
+		sysclk_rate = params_rate(params) * 512;
+	else
+		sysclk_rate = params_rate(params) * 256;
+
+	/* Set the codec FLL1 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+				  mclk_rate, sysclk_rate);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set FLL1: %d\n", ret);
+		return ret;
+	}
+
+	/* Set the codec SYSCLK */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+				     sysclk_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int trats2_aif1_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk_mclk);
+	if (ret) {
+		dev_err(rtd->card->dev, "Failed to enable mclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void trats2_aif1_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+
+	clk_disable_unprepare(priv->clk_mclk);
+}
+
+static const struct snd_soc_ops trats2_aif1_ops = {
+	.startup = trats2_aif1_startup,
+	.shutdown = trats2_aif1_shutdown,
+	.hw_params = trats2_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link trats2_dai[] = {
+	{
+		.name		= "WM1811 AIF1",
+		.stream_name	= "Pri_Dai",
+		.codec_dai_name = "wm8994-aif1",
+		.codec_name	= "wm8994-codec",
+		.ops		= &trats2_aif1_ops,
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+	},
+};
+
+static struct snd_soc_card trats2_card = {
+	.owner			= THIS_MODULE,
+
+	.dai_link		= trats2_dai,
+	.num_links		= ARRAY_SIZE(trats2_dai),
+
+	.controls		= trats2_controls,
+	.num_controls		= ARRAY_SIZE(trats2_controls),
+	.dapm_widgets		= trats2_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(trats2_dapm_widgets),
+
+	.drvdata		= &trats2_wm1811_priv,
+};
+
+static int trats2_audio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct snd_soc_card *card = &trats2_card;
+	struct device_node *codec_node;
+	struct snd_soc_dai_link *dai_link = card->dai_link;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "of node is missing.\n");
+		return -ENODEV;
+	}
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_of_parse_card_name(card, "samsung,model");
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Card name is not provided\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "Audio routing is not provided\n");
+		return ret;
+	}
+
+	dai_link->cpu_of_node = of_parse_phandle(np,
+						 "samsung,i2s-controller", 0);
+	if (dai_link->cpu_of_node == NULL) {
+		dev_err(&pdev->dev, "i2s-controller property parse error\n");
+		return -EINVAL;
+	}
+
+	dai_link->platform_of_node = dai_link->cpu_of_node;
+
+	codec_node = of_parse_phandle(np, "samsung,audio-codec", 0);
+	if (codec_node == NULL) {
+		dev_err(&pdev->dev, "audio-codec property parse error\n");
+		return -EINVAL;
+	}
+
+	priv->clk_mclk =  of_clk_get_by_name(codec_node, "MCLK1");
+	if (IS_ERR(priv->clk_mclk)) {
+		dev_err(&pdev->dev, "Failed to get mclk clock\n");
+		of_node_put(codec_node);
+		return PTR_ERR(priv->clk_mclk);
+	}
+	of_node_put(codec_node);
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register card: %d\n", ret);
+		goto clk_put;
+	}
+	return 0;
+
+clk_put:
+	clk_put(priv->clk_mclk);
+	return ret;
+}
+
+static int trats2_audio_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+
+	clk_put(priv->clk_mclk);
+
+	return 0;
+}
+
+static const struct of_device_id trats2_audio_of_match[] = {
+	{ .compatible	= "samsung,trats2-audio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, trats2_audio_of_match);
+
+static struct platform_driver trats2_audio_driver = {
+	.driver = {
+		.name		= "trats2-audio",
+		.owner		= THIS_MODULE,
+		.pm		= &snd_soc_pm_ops,
+		.of_match_table	= trats2_audio_of_match,
+	},
+	.probe	= trats2_audio_probe,
+	.remove	= trats2_audio_remove,
+};
+
+module_platform_driver(trats2_audio_driver);
+
+MODULE_AUTHOR("Inha Song <ideal.song@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC Trats2 Audio Support");
+MODULE_LICENSE("GPL v2");
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

This patch add the sound machine driver for Trats2 board.
The codec operate in master mode.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 sound/soc/samsung/Kconfig         |   8 ++
 sound/soc/samsung/Makefile        |   2 +
 sound/soc/samsung/trats2_wm1811.c | 218 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+)
 create mode 100644 sound/soc/samsung/trats2_wm1811.c

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index fc67f97..8031423 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
         depends on SND_SOC_SAMSUNG
         select SND_SAMSUNG_I2S
         select SND_SOC_RT5631
+
+config SND_SOC_SAMSUNG_TRATS2_WM1811
+	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
+	depends on SND_SOC_SAMSUNG
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_I2S
+	help
+	  Say Y if you want to add support for SoC audio on the Tizen Trats2 board.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 31e3dba..e2b7b1b 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -46,6 +46,7 @@ snd-soc-littlemill-objs := littlemill.o
 snd-soc-bells-objs := bells.o
 snd-soc-odroidx2-max98090-objs := odroidx2_max98090.o
 snd-soc-arndale-rt5631-objs := arndale_rt5631.o
+snd-soc-trats2-wm1811-objs := trats2_wm1811.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -73,3 +74,4 @@ obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
 obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o
 obj-$(CONFIG_SND_SOC_ODROIDX2) += snd-soc-odroidx2-max98090.o
 obj-$(CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631) += snd-soc-arndale-rt5631.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_TRATS2_WM1811) += snd-soc-trats2-wm1811.o
diff --git a/sound/soc/samsung/trats2_wm1811.c b/sound/soc/samsung/trats2_wm1811.c
new file mode 100644
index 0000000..b937612
--- /dev/null
+++ b/sound/soc/samsung/trats2_wm1811.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include "i2s.h"
+#include "../codecs/wm8994.h"
+
+struct trats2_machine_priv {
+	struct clk *clk_mclk;
+};
+
+static struct trats2_machine_priv trats2_wm1811_priv;
+
+static const struct snd_kcontrol_new trats2_controls[] = {
+	SOC_DAPM_PIN_SWITCH("SPK"),
+};
+
+static const struct snd_soc_dapm_widget trats2_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("SPK", NULL),
+};
+
+static int trats2_aif1_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	unsigned int sysclk_rate;
+	unsigned int mclk_rate =
+			(unsigned int)clk_get_rate(priv->clk_mclk);
+	int ret;
+
+	/* SYSCLK must be greater than 4.096MHz */
+	if (params_rate(params) == 8000 || params_rate(params) == 11025)
+		sysclk_rate = params_rate(params) * 512;
+	else
+		sysclk_rate = params_rate(params) * 256;
+
+	/* Set the codec FLL1 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+				  mclk_rate, sysclk_rate);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set FLL1: %d\n", ret);
+		return ret;
+	}
+
+	/* Set the codec SYSCLK */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+				     sysclk_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int trats2_aif1_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk_mclk);
+	if (ret) {
+		dev_err(rtd->card->dev, "Failed to enable mclk: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void trats2_aif1_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+
+	clk_disable_unprepare(priv->clk_mclk);
+}
+
+static const struct snd_soc_ops trats2_aif1_ops = {
+	.startup = trats2_aif1_startup,
+	.shutdown = trats2_aif1_shutdown,
+	.hw_params = trats2_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link trats2_dai[] = {
+	{
+		.name		= "WM1811 AIF1",
+		.stream_name	= "Pri_Dai",
+		.codec_dai_name = "wm8994-aif1",
+		.codec_name	= "wm8994-codec",
+		.ops		= &trats2_aif1_ops,
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+	},
+};
+
+static struct snd_soc_card trats2_card = {
+	.owner			= THIS_MODULE,
+
+	.dai_link		= trats2_dai,
+	.num_links		= ARRAY_SIZE(trats2_dai),
+
+	.controls		= trats2_controls,
+	.num_controls		= ARRAY_SIZE(trats2_controls),
+	.dapm_widgets		= trats2_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(trats2_dapm_widgets),
+
+	.drvdata		= &trats2_wm1811_priv,
+};
+
+static int trats2_audio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct snd_soc_card *card = &trats2_card;
+	struct device_node *codec_node;
+	struct snd_soc_dai_link *dai_link = card->dai_link;
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "of node is missing.\n");
+		return -ENODEV;
+	}
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_of_parse_card_name(card, "samsung,model");
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Card name is not provided\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "Audio routing is not provided\n");
+		return ret;
+	}
+
+	dai_link->cpu_of_node = of_parse_phandle(np,
+						 "samsung,i2s-controller", 0);
+	if (dai_link->cpu_of_node == NULL) {
+		dev_err(&pdev->dev, "i2s-controller property parse error\n");
+		return -EINVAL;
+	}
+
+	dai_link->platform_of_node = dai_link->cpu_of_node;
+
+	codec_node = of_parse_phandle(np, "samsung,audio-codec", 0);
+	if (codec_node == NULL) {
+		dev_err(&pdev->dev, "audio-codec property parse error\n");
+		return -EINVAL;
+	}
+
+	priv->clk_mclk =  of_clk_get_by_name(codec_node, "MCLK1");
+	if (IS_ERR(priv->clk_mclk)) {
+		dev_err(&pdev->dev, "Failed to get mclk clock\n");
+		of_node_put(codec_node);
+		return PTR_ERR(priv->clk_mclk);
+	}
+	of_node_put(codec_node);
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register card: %d\n", ret);
+		goto clk_put;
+	}
+	return 0;
+
+clk_put:
+	clk_put(priv->clk_mclk);
+	return ret;
+}
+
+static int trats2_audio_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+
+	clk_put(priv->clk_mclk);
+
+	return 0;
+}
+
+static const struct of_device_id trats2_audio_of_match[] = {
+	{ .compatible	= "samsung,trats2-audio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, trats2_audio_of_match);
+
+static struct platform_driver trats2_audio_driver = {
+	.driver = {
+		.name		= "trats2-audio",
+		.owner		= THIS_MODULE,
+		.pm		= &snd_soc_pm_ops,
+		.of_match_table	= trats2_audio_of_match,
+	},
+	.probe	= trats2_audio_probe,
+	.remove	= trats2_audio_remove,
+};
+
+module_platform_driver(trats2_audio_driver);
+
+MODULE_AUTHOR("Inha Song <ideal.song@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC Trats2 Audio Support");
+MODULE_LICENSE("GPL v2");
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 2/4] ASoC: samsung: Document Trats2 audio subsystem bindings

[Inha Song]

This patch add Trats2 audio subsystem bindings document.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 .../bindings/sound/samsung,trats2-wm1811.txt       | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt

diff --git a/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt b/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
new file mode 100644
index 0000000..319ff07
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
@@ -0,0 +1,25 @@
+Samsung Exynos Trats2 audio with WM1811 codec
+
+Required properties:
+
+ - compatible : Must be "samsung,trats2-audio"
+ - samsung,i2s-controller : The phandle of the I2S controller
+ - samsung,model : The user visible name of this sound
+ - samsung,audio-codec : The phandle of the WM1811 audio codec
+ - samsung,audio-routing : A list of the connections between audio
+   components. each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source
+
+Example:
+
+sound {
+	compatible = "samsung,trats2-audio";
+	samsung,i2s-controller = <&i2s0>;
+	samsung,model = "Trats2";
+	samsung,audio-codec = <&wm1811>;
+	samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+};
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 2/4] ASoC: samsung: Document Trats2 audio subsystem bindings

[Inha Song]

This patch add Trats2 audio subsystem bindings document.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 .../bindings/sound/samsung,trats2-wm1811.txt       | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt

diff --git a/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt b/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
new file mode 100644
index 0000000..319ff07
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,trats2-wm1811.txt
@@ -0,0 +1,25 @@
+Samsung Exynos Trats2 audio with WM1811 codec
+
+Required properties:
+
+ - compatible : Must be "samsung,trats2-audio"
+ - samsung,i2s-controller : The phandle of the I2S controller
+ - samsung,model : The user visible name of this sound
+ - samsung,audio-codec : The phandle of the WM1811 audio codec
+ - samsung,audio-routing : A list of the connections between audio
+   components. each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source
+
+Example:
+
+sound {
+	compatible = "samsung,trats2-audio";
+	samsung,i2s-controller = <&i2s0>;
+	samsung,model = "Trats2";
+	samsung,audio-codec = <&wm1811>;
+	samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+};
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Inha Song]

This patch set clock out parent to XUSBXTI.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b8168f1..020bbaf 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -141,6 +141,8 @@
 	pmu_system_controller: system-controller@10020000 {
 		compatible = "samsung,exynos4210-pmu", "syscon";
 		reg = <0x10020000 0x4000>;
+		assigned-clocks = <&pmu_system_controller 0>;
+		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 	};
 
 	dsi_0: dsi@11C80000 {
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Inha Song]

This patch set clock out parent to XUSBXTI.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b8168f1..020bbaf 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -141,6 +141,8 @@
 	pmu_system_controller: system-controller at 10020000 {
 		compatible = "samsung,exynos4210-pmu", "syscon";
 		reg = <0x10020000 0x4000>;
+		assigned-clocks = <&pmu_system_controller 0>;
+		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 	};
 
 	dsi_0: dsi at 11C80000 {
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 4/4] ARM: dts: Add sound nodes for exynos4412-trats2

[Inha Song]

This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 37 +++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 29231b4..ec1acaf 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -203,6 +203,25 @@
 		};
 	};
 
+	i2c@138A0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c4_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		wm1811: wm1811@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+			clocks = <&pmu_system_controller 0>;
+			clock-names = "MCLK1";
+			DCVDD-supply = <&ldo3_reg>;
+			DBVDD1-supply = <&ldo3_reg>;
+			wlf,ldo1ena = <&gpj0 4 0>;
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -838,6 +857,24 @@
 		};
 	};
 
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	sound {
+		compatible = "samsung,trats2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,model = "Trats2";
+		samsung,audio-codec = <&wm1811>;
+		samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+	};
+
 	exynos-usbphy@125B0000 {
 		status = "okay";
 	};
-- 
2.0.0.390.gcb682f8

[alsa-devel] [PATCH v3 4/4] ARM: dts: Add sound nodes for exynos4412-trats2

[Inha Song]

This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 37 +++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 29231b4..ec1acaf 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -203,6 +203,25 @@
 		};
 	};
 
+	i2c at 138A0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c4_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		wm1811: wm1811 at 1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+			clocks = <&pmu_system_controller 0>;
+			clock-names = "MCLK1";
+			DCVDD-supply = <&ldo3_reg>;
+			DBVDD1-supply = <&ldo3_reg>;
+			wlf,ldo1ena = <&gpj0 4 0>;
+		};
+	};
+
 	i2c at 138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -838,6 +857,24 @@
 		};
 	};
 
+	i2s0: i2s at 03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	sound {
+		compatible = "samsung,trats2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,model = "Trats2";
+		samsung,audio-codec = <&wm1811>;
+		samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+	};
+
 	exynos-usbphy at 125B0000 {
 		status = "okay";
 	};
-- 
2.0.0.390.gcb682f8

Re: [alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Sylwester Nawrocki]

On 22/01/15 12:17, Inha Song wrote:
> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index fc67f97..8031423 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
>          depends on SND_SOC_SAMSUNG
>          select SND_SAMSUNG_I2S
>          select SND_SOC_RT5631
> +
> +config SND_SOC_SAMSUNG_TRATS2_WM1811
> +	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
> +	depends on SND_SOC_SAMSUNG
> +	select SND_SOC_WM8994
> +	select SND_SAMSUNG_I2S

Shouldn't you also select the MFD part of WM8994 here ?

> +++ b/sound/soc/samsung/trats2_wm1811.c
> @@ -0,0 +1,218 @@

> +static struct snd_soc_dai_link trats2_dai[] = {
> +	{
> +		.name		= "WM1811 AIF1",
> +		.stream_name	= "Pri_Dai",

Could we have a less cryptic name here, e.g. "HiFi Primary" ?

> +		.codec_dai_name = "wm8994-aif1",
> +		.codec_name	= "wm8994-codec",
> +		.ops		= &trats2_aif1_ops,
> +		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> +				  SND_SOC_DAIFMT_CBM_CFM,
> +	},
> +};

> +static int trats2_audio_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct snd_soc_card *card = &trats2_card;
> +	struct device_node *codec_node;
> +	struct snd_soc_dai_link *dai_link = card->dai_link;
> +	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
> +	int ret;
> +
> +	if (!np) {
> +		dev_err(&pdev->dev, "of node is missing.\n");
> +		return -ENODEV;

I'd say this whole np test could be dropped, we will fail right below
at the snd_soc_of_parse_card_name() function call if np is NULL.
Such a situation seems highly unlikely anyway.

> +	}
> +
> +	card->dev = &pdev->dev;
> +
> +	ret = snd_soc_of_parse_card_name(card, "samsung,model");
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Card name is not provided\n");

I guess it would fit in a single line.

> +		return ret;
> +	}
> +

> +static struct platform_driver trats2_audio_driver = {
> +	.driver = {
> +		.name		= "trats2-audio",
> +		.owner		= THIS_MODULE,

You can drop this .owner field assignment, it's also done in
module_platform_driver() macro.

> +		.pm		= &snd_soc_pm_ops,
> +		.of_match_table	= trats2_audio_of_match,
> +	},
> +	.probe	= trats2_audio_probe,
> +	.remove	= trats2_audio_remove,
> +};
> +
> +module_platform_driver(trats2_audio_driver);

--
Regards,
Sylwester

[alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Sylwester Nawrocki]

On 22/01/15 12:17, Inha Song wrote:
> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index fc67f97..8031423 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
>          depends on SND_SOC_SAMSUNG
>          select SND_SAMSUNG_I2S
>          select SND_SOC_RT5631
> +
> +config SND_SOC_SAMSUNG_TRATS2_WM1811
> +	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
> +	depends on SND_SOC_SAMSUNG
> +	select SND_SOC_WM8994
> +	select SND_SAMSUNG_I2S

Shouldn't you also select the MFD part of WM8994 here ?

> +++ b/sound/soc/samsung/trats2_wm1811.c
> @@ -0,0 +1,218 @@

> +static struct snd_soc_dai_link trats2_dai[] = {
> +	{
> +		.name		= "WM1811 AIF1",
> +		.stream_name	= "Pri_Dai",

Could we have a less cryptic name here, e.g. "HiFi Primary" ?

> +		.codec_dai_name = "wm8994-aif1",
> +		.codec_name	= "wm8994-codec",
> +		.ops		= &trats2_aif1_ops,
> +		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> +				  SND_SOC_DAIFMT_CBM_CFM,
> +	},
> +};

> +static int trats2_audio_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct snd_soc_card *card = &trats2_card;
> +	struct device_node *codec_node;
> +	struct snd_soc_dai_link *dai_link = card->dai_link;
> +	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
> +	int ret;
> +
> +	if (!np) {
> +		dev_err(&pdev->dev, "of node is missing.\n");
> +		return -ENODEV;

I'd say this whole np test could be dropped, we will fail right below
at the snd_soc_of_parse_card_name() function call if np is NULL.
Such a situation seems highly unlikely anyway.

> +	}
> +
> +	card->dev = &pdev->dev;
> +
> +	ret = snd_soc_of_parse_card_name(card, "samsung,model");
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Card name is not provided\n");

I guess it would fit in a single line.

> +		return ret;
> +	}
> +

> +static struct platform_driver trats2_audio_driver = {
> +	.driver = {
> +		.name		= "trats2-audio",
> +		.owner		= THIS_MODULE,

You can drop this .owner field assignment, it's also done in
module_platform_driver() macro.

> +		.pm		= &snd_soc_pm_ops,
> +		.of_match_table	= trats2_audio_of_match,
> +	},
> +	.probe	= trats2_audio_probe,
> +	.remove	= trats2_audio_remove,
> +};
> +
> +module_platform_driver(trats2_audio_driver);

--
Regards,
Sylwester

Re: [alsa-devel] [PATCH v3 2/4] ASoC: samsung: Document Trats2 audio subsystem bindings

[Sylwester Nawrocki]

On 22/01/15 12:18, Inha Song wrote:
> This patch add Trats2 audio subsystem bindings document.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

[alsa-devel] [PATCH v3 2/4] ASoC: samsung: Document Trats2 audio subsystem bindings

[Sylwester Nawrocki]

On 22/01/15 12:18, Inha Song wrote:
> This patch add Trats2 audio subsystem bindings document.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Re: [alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Sylwester Nawrocki]

On 22/01/15 12:18, Inha Song wrote:
> This patch set clock out parent to XUSBXTI.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index b8168f1..020bbaf 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -141,6 +141,8 @@
>  	pmu_system_controller: system-controller@10020000 {
>  		compatible = "samsung,exynos4210-pmu", "syscon";
>  		reg = <0x10020000 0x4000>;
> +		assigned-clocks = <&pmu_system_controller 0>;
> +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
>  	};

Looks good, except it needs to be done only for the Trats2 board, i.e.
the PMU device node including these properties should be added to
exynos4412-trats2.dts.  I think it's fine to make it a one patch including
all dts changes.


-- 
Regards,
Sylwester

[alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Sylwester Nawrocki]

On 22/01/15 12:18, Inha Song wrote:
> This patch set clock out parent to XUSBXTI.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index b8168f1..020bbaf 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -141,6 +141,8 @@
>  	pmu_system_controller: system-controller at 10020000 {
>  		compatible = "samsung,exynos4210-pmu", "syscon";
>  		reg = <0x10020000 0x4000>;
> +		assigned-clocks = <&pmu_system_controller 0>;
> +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
>  	};

Looks good, except it needs to be done only for the Trats2 board, i.e.
the PMU device node including these properties should be added to
exynos4412-trats2.dts.  I think it's fine to make it a one patch including
all dts changes.


-- 
Regards,
Sylwester

Re: [alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Inha Song]

Hi,
Thanks for your comment.

On Thu, 22 Jan 2015 13:25:07 +0100
Sylwester Nawrocki <s.nawrocki@samsung.com> wrote:

> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> > 
> > Signed-off-by: Inha Song <ideal.song@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos4.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index b8168f1..020bbaf 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -141,6 +141,8 @@
> >  	pmu_system_controller: system-controller@10020000 {
> >  		compatible = "samsung,exynos4210-pmu", "syscon";
> >  		reg = <0x10020000 0x4000>;
> > +		assigned-clocks = <&pmu_system_controller 0>;
> > +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> >  	};
> 
> Looks good, except it needs to be done only for the Trats2 board, i.e.
> the PMU device node including these properties should be added to
> exynos4412-trats2.dts.  I think it's fine to make it a one patch including
> all dts changes.

Opps! I understand. I will move this node to exynos4412-trats2.dts.

&pmu_system_controller {
   assigned-clocks = <&pmu_system_controller 0>;
   assigned-clock-parents =  <&clock CLK_XUSBXTI>;
};

Thanks!

Best Regards,
Inha Song.

> 
> 
> -- 
> Regards,
> Sylwester
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Inha Song]

Hi,
Thanks for your comment.

On Thu, 22 Jan 2015 13:25:07 +0100
Sylwester Nawrocki <s.nawrocki@samsung.com> wrote:

> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> > 
> > Signed-off-by: Inha Song <ideal.song@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos4.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index b8168f1..020bbaf 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -141,6 +141,8 @@
> >  	pmu_system_controller: system-controller at 10020000 {
> >  		compatible = "samsung,exynos4210-pmu", "syscon";
> >  		reg = <0x10020000 0x4000>;
> > +		assigned-clocks = <&pmu_system_controller 0>;
> > +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> >  	};
> 
> Looks good, except it needs to be done only for the Trats2 board, i.e.
> the PMU device node including these properties should be added to
> exynos4412-trats2.dts.  I think it's fine to make it a one patch including
> all dts changes.

Opps! I understand. I will move this node to exynos4412-trats2.dts.

&pmu_system_controller {
   assigned-clocks = <&pmu_system_controller 0>;
   assigned-clock-parents =  <&clock CLK_XUSBXTI>;
};

Thanks!

Best Regards,
Inha Song.

> 
> 
> -- 
> Regards,
> Sylwester
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

Hi,
Thanks for your review.

On Thu, 22 Jan 2015 13:16:03 +0100
Sylwester Nawrocki <s.nawrocki@samsung.com> wrote:

> On 22/01/15 12:17, Inha Song wrote:
> > diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> > index fc67f97..8031423 100644
> > --- a/sound/soc/samsung/Kconfig
> > +++ b/sound/soc/samsung/Kconfig
> > @@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
> >          depends on SND_SOC_SAMSUNG
> >          select SND_SAMSUNG_I2S
> >          select SND_SOC_RT5631
> > +
> > +config SND_SOC_SAMSUNG_TRATS2_WM1811
> > +	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
> > +	depends on SND_SOC_SAMSUNG
> > +	select SND_SOC_WM8994
> > +	select SND_SAMSUNG_I2S
> 
> Shouldn't you also select the MFD part of WM8994 here ?
Maybe, I will add also "select MFD_WM8994"

> 
> > +++ b/sound/soc/samsung/trats2_wm1811.c
> > @@ -0,0 +1,218 @@
> 
> > +static struct snd_soc_dai_link trats2_dai[] = {
> > +	{
> > +		.name		= "WM1811 AIF1",
> > +		.stream_name	= "Pri_Dai",
> 
> Could we have a less cryptic name here, e.g. "HiFi Primary" ?

Looks like "HiFi Primary", I will fix.

> 
> > +		.codec_dai_name = "wm8994-aif1",
> > +		.codec_name	= "wm8994-codec",
> > +		.ops		= &trats2_aif1_ops,
> > +		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> > +				  SND_SOC_DAIFMT_CBM_CFM,
> > +	},
> > +};
> 
> > +static int trats2_audio_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct snd_soc_card *card = &trats2_card;
> > +	struct device_node *codec_node;
> > +	struct snd_soc_dai_link *dai_link = card->dai_link;
> > +	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
> > +	int ret;
> > +
> > +	if (!np) {
> > +		dev_err(&pdev->dev, "of node is missing.\n");
> > +		return -ENODEV;
> 
> I'd say this whole np test could be dropped, we will fail right below
> at the snd_soc_of_parse_card_name() function call if np is NULL.
> Such a situation seems highly unlikely anyway.
I will remove :)

> 
> > +	}
> > +
> > +	card->dev = &pdev->dev;
> > +
> > +	ret = snd_soc_of_parse_card_name(card, "samsung,model");
> > +	if (ret) {
> > +		dev_err(&pdev->dev,
> > +			"Card name is not provided\n");
> 
> I guess it would fit in a single line.
Oh, Thanks.

> 
> > +		return ret;
> > +	}
> > +
> 
> > +static struct platform_driver trats2_audio_driver = {
> > +	.driver = {
> > +		.name		= "trats2-audio",
> > +		.owner		= THIS_MODULE,
> 
> You can drop this .owner field assignment, it's also done in
> module_platform_driver() macro.
> 
Yes, I will fix based on your comments :)
Thanks,

Best Regards,
Inha Song.

> > +		.pm		= &snd_soc_pm_ops,
> > +		.of_match_table	= trats2_audio_of_match,
> > +	},
> > +	.probe	= trats2_audio_probe,
> > +	.remove	= trats2_audio_remove,
> > +};
> > +
> > +module_platform_driver(trats2_audio_driver);
> 
> --
> Regards,
> Sylwester
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

Hi,
Thanks for your review.

On Thu, 22 Jan 2015 13:16:03 +0100
Sylwester Nawrocki <s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:

> On 22/01/15 12:17, Inha Song wrote:
> > diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> > index fc67f97..8031423 100644
> > --- a/sound/soc/samsung/Kconfig
> > +++ b/sound/soc/samsung/Kconfig
> > @@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
> >          depends on SND_SOC_SAMSUNG
> >          select SND_SAMSUNG_I2S
> >          select SND_SOC_RT5631
> > +
> > +config SND_SOC_SAMSUNG_TRATS2_WM1811
> > +	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
> > +	depends on SND_SOC_SAMSUNG
> > +	select SND_SOC_WM8994
> > +	select SND_SAMSUNG_I2S
> 
> Shouldn't you also select the MFD part of WM8994 here ?
Maybe, I will add also "select MFD_WM8994"

> 
> > +++ b/sound/soc/samsung/trats2_wm1811.c
> > @@ -0,0 +1,218 @@
> 
> > +static struct snd_soc_dai_link trats2_dai[] = {
> > +	{
> > +		.name		= "WM1811 AIF1",
> > +		.stream_name	= "Pri_Dai",
> 
> Could we have a less cryptic name here, e.g. "HiFi Primary" ?

Looks like "HiFi Primary", I will fix.

> 
> > +		.codec_dai_name = "wm8994-aif1",
> > +		.codec_name	= "wm8994-codec",
> > +		.ops		= &trats2_aif1_ops,
> > +		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> > +				  SND_SOC_DAIFMT_CBM_CFM,
> > +	},
> > +};
> 
> > +static int trats2_audio_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct snd_soc_card *card = &trats2_card;
> > +	struct device_node *codec_node;
> > +	struct snd_soc_dai_link *dai_link = card->dai_link;
> > +	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
> > +	int ret;
> > +
> > +	if (!np) {
> > +		dev_err(&pdev->dev, "of node is missing.\n");
> > +		return -ENODEV;
> 
> I'd say this whole np test could be dropped, we will fail right below
> at the snd_soc_of_parse_card_name() function call if np is NULL.
> Such a situation seems highly unlikely anyway.
I will remove :)

> 
> > +	}
> > +
> > +	card->dev = &pdev->dev;
> > +
> > +	ret = snd_soc_of_parse_card_name(card, "samsung,model");
> > +	if (ret) {
> > +		dev_err(&pdev->dev,
> > +			"Card name is not provided\n");
> 
> I guess it would fit in a single line.
Oh, Thanks.

> 
> > +		return ret;
> > +	}
> > +
> 
> > +static struct platform_driver trats2_audio_driver = {
> > +	.driver = {
> > +		.name		= "trats2-audio",
> > +		.owner		= THIS_MODULE,
> 
> You can drop this .owner field assignment, it's also done in
> module_platform_driver() macro.
> 
Yes, I will fix based on your comments :)
Thanks,

Best Regards,
Inha Song.

> > +		.pm		= &snd_soc_pm_ops,
> > +		.of_match_table	= trats2_audio_of_match,
> > +	},
> > +	.probe	= trats2_audio_probe,
> > +	.remove	= trats2_audio_remove,
> > +};
> > +
> > +module_platform_driver(trats2_audio_driver);
> 
> --
> Regards,
> Sylwester
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[alsa-devel] [PATCH v3 1/4] ASoC: samsung: Add machine driver for Trats2

[Inha Song]

Hi,
Thanks for your review.

On Thu, 22 Jan 2015 13:16:03 +0100
Sylwester Nawrocki <s.nawrocki@samsung.com> wrote:

> On 22/01/15 12:17, Inha Song wrote:
> > diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> > index fc67f97..8031423 100644
> > --- a/sound/soc/samsung/Kconfig
> > +++ b/sound/soc/samsung/Kconfig
> > @@ -245,3 +245,11 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
> >          depends on SND_SOC_SAMSUNG
> >          select SND_SAMSUNG_I2S
> >          select SND_SOC_RT5631
> > +
> > +config SND_SOC_SAMSUNG_TRATS2_WM1811
> > +	tristate "SoC I2S Audio support for WM1811 on Tizen Trats2 board"
> > +	depends on SND_SOC_SAMSUNG
> > +	select SND_SOC_WM8994
> > +	select SND_SAMSUNG_I2S
> 
> Shouldn't you also select the MFD part of WM8994 here ?
Maybe, I will add also "select MFD_WM8994"

> 
> > +++ b/sound/soc/samsung/trats2_wm1811.c
> > @@ -0,0 +1,218 @@
> 
> > +static struct snd_soc_dai_link trats2_dai[] = {
> > +	{
> > +		.name		= "WM1811 AIF1",
> > +		.stream_name	= "Pri_Dai",
> 
> Could we have a less cryptic name here, e.g. "HiFi Primary" ?

Looks like "HiFi Primary", I will fix.

> 
> > +		.codec_dai_name = "wm8994-aif1",
> > +		.codec_name	= "wm8994-codec",
> > +		.ops		= &trats2_aif1_ops,
> > +		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> > +				  SND_SOC_DAIFMT_CBM_CFM,
> > +	},
> > +};
> 
> > +static int trats2_audio_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct snd_soc_card *card = &trats2_card;
> > +	struct device_node *codec_node;
> > +	struct snd_soc_dai_link *dai_link = card->dai_link;
> > +	struct trats2_machine_priv *priv = snd_soc_card_get_drvdata(card);
> > +	int ret;
> > +
> > +	if (!np) {
> > +		dev_err(&pdev->dev, "of node is missing.\n");
> > +		return -ENODEV;
> 
> I'd say this whole np test could be dropped, we will fail right below
> at the snd_soc_of_parse_card_name() function call if np is NULL.
> Such a situation seems highly unlikely anyway.
I will remove :)

> 
> > +	}
> > +
> > +	card->dev = &pdev->dev;
> > +
> > +	ret = snd_soc_of_parse_card_name(card, "samsung,model");
> > +	if (ret) {
> > +		dev_err(&pdev->dev,
> > +			"Card name is not provided\n");
> 
> I guess it would fit in a single line.
Oh, Thanks.

> 
> > +		return ret;
> > +	}
> > +
> 
> > +static struct platform_driver trats2_audio_driver = {
> > +	.driver = {
> > +		.name		= "trats2-audio",
> > +		.owner		= THIS_MODULE,
> 
> You can drop this .owner field assignment, it's also done in
> module_platform_driver() macro.
> 
Yes, I will fix based on your comments :)
Thanks,

Best Regards,
Inha Song.

> > +		.pm		= &snd_soc_pm_ops,
> > +		.of_match_table	= trats2_audio_of_match,
> > +	},
> > +	.probe	= trats2_audio_probe,
> > +	.remove	= trats2_audio_remove,
> > +};
> > +
> > +module_platform_driver(trats2_audio_driver);
> 
> --
> Regards,
> Sylwester
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Kukjin Kim]

Sylwester Nawrocki wrote:
> 
> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> >
> > Signed-off-by: Inha Song <ideal.song@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos4.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index b8168f1..020bbaf 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -141,6 +141,8 @@
> >  	pmu_system_controller: system-controller@10020000 {
> >  		compatible = "samsung,exynos4210-pmu", "syscon";
> >  		reg = <0x10020000 0x4000>;
> > +		assigned-clocks = <&pmu_system_controller 0>;
> > +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> >  	};
> 
> Looks good, except it needs to be done only for the Trats2 board, i.e.
> the PMU device node including these properties should be added to
> exynos4412-trats2.dts.  I think it's fine to make it a one patch including
> all dts changes.
> 
Yeah, I agree with Sylwester's suggestion. Please make a one patch for the
updating DT for sound support and adding me in Cc for the change for relevant
driver changes as well.

Thanks,
Kukjin

RE: [alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Kukjin Kim]

Sylwester Nawrocki wrote:
> 
> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> >
> > Signed-off-by: Inha Song <ideal.song-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> > ---
> >  arch/arm/boot/dts/exynos4.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index b8168f1..020bbaf 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -141,6 +141,8 @@
> >  	pmu_system_controller: system-controller@10020000 {
> >  		compatible = "samsung,exynos4210-pmu", "syscon";
> >  		reg = <0x10020000 0x4000>;
> > +		assigned-clocks = <&pmu_system_controller 0>;
> > +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> >  	};
> 
> Looks good, except it needs to be done only for the Trats2 board, i.e.
> the PMU device node including these properties should be added to
> exynos4412-trats2.dts.  I think it's fine to make it a one patch including
> all dts changes.
> 
Yeah, I agree with Sylwester's suggestion. Please make a one patch for the
updating DT for sound support and adding me in Cc for the change for relevant
driver changes as well.

Thanks,
Kukjin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[alsa-devel] [PATCH v3 3/4] ARM: dts: set clock out parent to XUSBXTI

[Kukjin Kim]

Sylwester Nawrocki wrote:
> 
> On 22/01/15 12:18, Inha Song wrote:
> > This patch set clock out parent to XUSBXTI.
> >
> > Signed-off-by: Inha Song <ideal.song@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos4.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> > index b8168f1..020bbaf 100644
> > --- a/arch/arm/boot/dts/exynos4.dtsi
> > +++ b/arch/arm/boot/dts/exynos4.dtsi
> > @@ -141,6 +141,8 @@
> >  	pmu_system_controller: system-controller at 10020000 {
> >  		compatible = "samsung,exynos4210-pmu", "syscon";
> >  		reg = <0x10020000 0x4000>;
> > +		assigned-clocks = <&pmu_system_controller 0>;
> > +		assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> >  	};
> 
> Looks good, except it needs to be done only for the Trats2 board, i.e.
> the PMU device node including these properties should be added to
> exynos4412-trats2.dts.  I think it's fine to make it a one patch including
> all dts changes.
> 
Yeah, I agree with Sylwester's suggestion. Please make a one patch for the
updating DT for sound support and adding me in Cc for the change for relevant
driver changes as well.

Thanks,
Kukjin