From: Suman Tripathi <stripathi@apm.com> To: chris@printf.net, anton@enomsg.org, arnd@arndb.de Cc: linux-mmc@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, ddutile@redhat.com, jcm@redhat.com, mlangsdo@redhat.com, patches@apm.com, Suman Tripathi <stripathi@apm.com> Subject: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi. Date: Tue, 27 Jan 2015 22:51:00 +0530 [thread overview] Message-ID: <1422379260-10139-3-git-send-email-stripathi@apm.com> (raw) In-Reply-To: <1422379260-10139-1-git-send-email-stripathi@apm.com> This patch adds the arasan sdhc nodes to reuse the of-arasan driver for APM X-Gene SoC. Signed-off-by: Suman Tripathi <stripathi@apm.com> --- arch/arm64/boot/dts/apm-storm.dtsi | 43 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index f1ad9c2..52de7d3 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -144,6 +144,40 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x1>; + enable-offset = <0x8>; + enable-mask = <0x1>; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + qmlclk: qmlclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -595,6 +629,15 @@ clocks = <&rtcclk 0>; }; + sdhc0: sdhc@1c000000 { + device_type = "sdhc"; + compatible = "arasan,sdhci-8.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + menet: ethernet@17020000 { compatible = "apm,xgene-enet"; status = "disabled"; -- 1.8.2.1
WARNING: multiple messages have this Message-ID (diff)
From: Suman Tripathi <stripathi@apm.com> To: chris@printf.net, anton@enomsg.org, arnd@arndb.de Cc: devicetree@vger.kernel.org, mlangsdo@redhat.com, Suman Tripathi <stripathi@apm.com>, jcm@redhat.com, linux-mmc@vger.kernel.org, patches@apm.com, ddutile@redhat.com, linuxppc-dev@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi. Date: Tue, 27 Jan 2015 22:51:00 +0530 [thread overview] Message-ID: <1422379260-10139-3-git-send-email-stripathi@apm.com> (raw) In-Reply-To: <1422379260-10139-1-git-send-email-stripathi@apm.com> This patch adds the arasan sdhc nodes to reuse the of-arasan driver for APM X-Gene SoC. Signed-off-by: Suman Tripathi <stripathi@apm.com> --- arch/arm64/boot/dts/apm-storm.dtsi | 43 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi index f1ad9c2..52de7d3 100644 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm-storm.dtsi @@ -144,6 +144,40 @@ clock-output-names = "socplldiv2"; }; + ahbclk: ahbclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x1>; + enable-offset = <0x8>; + enable-mask = <0x1>; + divider-offset = <0x164>; + divider-width = <0x5>; + divider-shift = <0x0>; + clock-output-names = "ahbclk"; + }; + + sdioclk: sdioclk@1f2ac000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2ac000 0x0 0x1000 + 0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg", "div-reg"; + csr-offset = <0x0>; + csr-mask = <0x2>; + enable-offset = <0x8>; + enable-mask = <0x2>; + divider-offset = <0x178>; + divider-width = <0x8>; + divider-shift = <0x0>; + clock-output-names = "sdioclk"; + }; + qmlclk: qmlclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; @@ -595,6 +629,15 @@ clocks = <&rtcclk 0>; }; + sdhc0: sdhc@1c000000 { + device_type = "sdhc"; + compatible = "arasan,sdhci-8.9a"; + reg = <0x0 0x1c000000 0x0 0x100>; + interrupts = <0x0 0x49 0x4>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&sdioclk 0>, <&ahbclk 0>; + }; + menet: ethernet@17020000 { compatible = "apm,xgene-enet"; status = "disabled"; -- 1.8.2.1
next prev parent reply other threads:[~2015-01-27 17:21 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-27 17:20 [PATCH v1 0/2] Add SDHCI support for APM X-Gene SoC using ARASAN SDHCI controller Suman Tripathi 2015-01-27 17:20 ` Suman Tripathi 2015-01-27 17:20 ` [PATCH v1 1/2] mmc: host: arasan: Add addition of-arasan quirks and IOMMU support for arasan SDHCI driver Suman Tripathi 2015-01-27 17:20 ` Suman Tripathi 2015-01-27 20:12 ` Arnd Bergmann 2015-01-27 20:12 ` Arnd Bergmann 2015-01-27 20:12 ` Arnd Bergmann 2015-01-27 17:21 ` Suman Tripathi [this message] 2015-01-27 17:21 ` [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi Suman Tripathi 2015-01-27 20:13 ` Arnd Bergmann 2015-01-27 20:13 ` Arnd Bergmann 2015-01-27 20:13 ` Arnd Bergmann 2015-01-28 4:18 ` Suman Tripathi 2015-01-28 4:18 ` Suman Tripathi 2015-01-28 4:23 ` Suman Tripathi 2015-01-28 4:23 ` Suman Tripathi 2015-01-28 12:46 ` Arnd Bergmann 2015-01-28 12:46 ` Arnd Bergmann 2015-01-28 13:22 ` Suman Tripathi 2015-01-28 13:22 ` Suman Tripathi 2015-01-28 13:22 ` Suman Tripathi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1422379260-10139-3-git-send-email-stripathi@apm.com \ --to=stripathi@apm.com \ --cc=anton@enomsg.org \ --cc=arnd@arndb.de \ --cc=chris@printf.net \ --cc=ddutile@redhat.com \ --cc=devicetree@vger.kernel.org \ --cc=jcm@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mlangsdo@redhat.com \ --cc=patches@apm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.