All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: tony@atomide.com, paul@pwsan.com, linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
Date: Wed, 25 Feb 2015 21:04:27 +0200	[thread overview]
Message-ID: <1424891085-10392-18-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1424891085-10392-1-git-send-email-t-kristo@ti.com>

PRM device instance offset is now provided through the prm_init_data.
This gets rid of some cpu_is_X / soc_is_X calls from PRM core code,
preparing for PRM to be its own separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    2 ++
 arch/arm/mach-omap2/prm44xx.c     |    2 ++
 arch/arm/mach-omap2/prm_common.c  |   28 +++++++++++++++++++++++++---
 arch/arm/mach-omap2/prminst44xx.c |   18 +++++-------------
 arch/arm/mach-omap2/prminst44xx.h |    1 +
 5 files changed, 35 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 461bdc4..6ae0b3a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
  * @init: low level PRCM init function for this module
  * @np: device node for this PRCM module
  */
@@ -532,6 +533,7 @@ struct omap_prcm_init_data {
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	s32 device_inst_offset;
 	int (*init)(const struct omap_prcm_init_data *data);
 	struct device_node *np;
 };
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index e3f2d31..a980d245 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	if (!soc_is_dra7xx())
 		prm_features |= PRM_HAS_VOLTAGE;
 
+	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7c1ad89..bfefbcb 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -34,6 +34,9 @@
 #include "prm3xxx.h"
 #include "prm33xx.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
 #include "common.h"
 #include "clock.h"
 #include "cm.h"
@@ -658,6 +661,25 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = AM43XX_PRM_DEVICE_INST,
 };
 
 static struct omap_prcm_init_data scrm_data __initdata = {
@@ -666,16 +688,16 @@ static struct omap_prcm_init_data scrm_data __initdata = {
 
 static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1..c4859c4 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@ void omap_prm_base_init(void)
 
 s32 omap4_prmst_get_prm_dev_inst(void)
 {
-	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
-		return prm_dev_inst;
-
-	/* This cannot be done way early at boot.. as things are not setup */
-	if (cpu_is_omap44xx())
-		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
 	return prm_dev_inst;
 }
 
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+	prm_dev_inst = dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index fb1c9d7..0c03d07 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -14,6 +14,7 @@
 
 #define PRM_INSTANCE_UNKNOWN	-1
 extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
 
 /*
  * In an ideal world, we would not export these low-level functions,
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
Date: Wed, 25 Feb 2015 21:04:27 +0200	[thread overview]
Message-ID: <1424891085-10392-18-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1424891085-10392-1-git-send-email-t-kristo@ti.com>

PRM device instance offset is now provided through the prm_init_data.
This gets rid of some cpu_is_X / soc_is_X calls from PRM core code,
preparing for PRM to be its own separate driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/prcm-common.h |    2 ++
 arch/arm/mach-omap2/prm44xx.c     |    2 ++
 arch/arm/mach-omap2/prm_common.c  |   28 +++++++++++++++++++++++++---
 arch/arm/mach-omap2/prminst44xx.c |   18 +++++-------------
 arch/arm/mach-omap2/prminst44xx.h |    1 +
 5 files changed, 35 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 461bdc4..6ae0b3a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -524,6 +524,7 @@ struct omap_prcm_irq_setup {
  * @mem: IO mem pointer for this module
  * @offset: module base address offset from the IO base
  * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
  * @init: low level PRCM init function for this module
  * @np: device node for this PRCM module
  */
@@ -532,6 +533,7 @@ struct omap_prcm_init_data {
 	void __iomem *mem;
 	s16 offset;
 	u16 flags;
+	s32 device_inst_offset;
 	int (*init)(const struct omap_prcm_init_data *data);
 	struct device_node *np;
 };
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index e3f2d31..a980d245 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -713,6 +713,8 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
 	if (!soc_is_dra7xx())
 		prm_features |= PRM_HAS_VOLTAGE;
 
+	omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7c1ad89..bfefbcb 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -34,6 +34,9 @@
 #include "prm3xxx.h"
 #include "prm33xx.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
 #include "common.h"
 #include "clock.h"
 #include "cm.h"
@@ -658,6 +661,25 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
 	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+};
+
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+	.index = TI_CLKM_PRM,
+	.init = omap44xx_prm_init,
+	.device_inst_offset = AM43XX_PRM_DEVICE_INST,
 };
 
 static struct omap_prcm_init_data scrm_data __initdata = {
@@ -666,16 +688,16 @@ static struct omap_prcm_init_data scrm_data __initdata = {
 
 static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
 	{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
-	{ .compatible = "ti,am4-prcm", .data = &omap4_prm_data },
+	{ .compatible = "ti,am4-prcm", .data = &am4_prm_data },
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 	{ .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
 	{ .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
 	{ .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
 	{ .compatible = "ti,omap4-scrm", .data = &scrm_data },
-	{ .compatible = "ti,omap5-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
 	{ .compatible = "ti,omap5-scrm", .data = &scrm_data },
-	{ .compatible = "ti,dra7-prm", .data = &omap4_prm_data },
+	{ .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
 	{ }
 };
 
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1..c4859c4 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@ void omap_prm_base_init(void)
 
 s32 omap4_prmst_get_prm_dev_inst(void)
 {
-	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
-		return prm_dev_inst;
-
-	/* This cannot be done way early at boot.. as things are not setup */
-	if (cpu_is_omap44xx())
-		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
 	return prm_dev_inst;
 }
 
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+	prm_dev_inst = dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index fb1c9d7..0c03d07 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -14,6 +14,7 @@
 
 #define PRM_INSTANCE_UNKNOWN	-1
 extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
 
 /*
  * In an ideal world, we would not export these low-level functions,
-- 
1.7.9.5

  parent reply	other threads:[~2015-02-25 19:05 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-25 19:04 [PATCHv3 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1 Tero Kristo
2015-02-25 19:04 ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:08   ` Felipe Balbi
2015-02-25 19:08     ` Felipe Balbi
2015-02-25 19:04 ` [PATCHv3 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:09   ` Felipe Balbi
2015-02-25 19:09     ` Felipe Balbi
2015-02-25 19:44     ` Tero Kristo
2015-02-25 19:44       ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-03-06 19:18   ` Mike Turquette
2015-03-06 19:18     ` Mike Turquette
2015-03-17 18:38     ` Tony Lindgren
2015-03-17 18:38       ` Tony Lindgren
2015-03-18  7:06       ` Tero Kristo
2015-03-18  7:06         ` Tero Kristo
2015-03-18 17:02         ` Tony Lindgren
2015-03-18 17:02           ` Tony Lindgren
2015-03-19  7:14           ` Tero Kristo
2015-03-19  7:14             ` Tero Kristo
2015-03-20  7:00     ` Tero Kristo
2015-03-20  7:00       ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 13/35] ARM: OMAP2+: CM: determine CM base address from device tree Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 14/35] ARM: OMAP2+: PRM: determine PRM " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 15/35] ARM: OMAP2+: control: determine control module base address from DT Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` Tero Kristo [this message]
2015-02-25 19:04   ` [PATCHv3 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility Tero Kristo
2015-02-25 19:04 ` [PATCHv3 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 21/35] ARM: OMAP2+: clock: add low-level support for regmap Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 22/35] ARM: OMAP2+: control: remove API for getting control module base address Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 23/35] ARM: OMAP2+: id: cache omap_type value Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 24/35] ARM: OMAP2+: control: add syscon support for register accesses Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 25/35] ARM: dts: omap24xx: merge control module features under scrm node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 26/35] ARM: dts: omap3: " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 27/35] ARM: dts: am33xx: " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 29/35] ARM: dts: am4372: merge control module features under scrm node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 30/35] ARM: dts: omap4: add system control module node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 33/35] ARM: dts: omap5: add system control module node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 34/35] ARM: dts: dra7: " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-03-11 17:17   ` Tony Lindgren
2015-03-11 17:17     ` Tony Lindgren
2015-03-11 19:08     ` Tero Kristo
2015-03-11 19:08       ` Tero Kristo
2015-03-11 19:26       ` Tony Lindgren
2015-03-11 19:26         ` Tony Lindgren
2015-03-11 19:57         ` Tero Kristo
2015-03-11 19:57           ` Tero Kristo
2015-03-11 21:00           ` Tony Lindgren
2015-03-11 21:00             ` Tony Lindgren
2015-02-25 19:04 ` [PATCHv3 35/35] ARM: OMAP4+: control: add support for initializing control module via DT Tero Kristo
2015-02-25 19:04   ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424891085-10392-18-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.