All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: tony@atomide.com, paul@pwsan.com, linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
Date: Wed, 25 Feb 2015 21:04:44 +0200	[thread overview]
Message-ID: <1424891085-10392-35-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1424891085-10392-1-git-send-email-t-kristo@ti.com>

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    1 +
 arch/arm/boot/dts/dra7.dtsi                        |   60 ++++++++++++--------
 2 files changed, 36 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 3574d67..f84f4ea 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -21,6 +21,7 @@ Required properties:
 		"ti,omap3-scrm"
 		"ti,omap4-ctrl"
 		"ti,omap5-ctrl"
+		"ti,dra7-ctrl"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..230d22d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -203,26 +203,47 @@
 			};
 		};
 
+		scm: scm@4a002000 {
+			compatible = "ti,dra7-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1400>,
+			      <0x4a003400 0x600>,
+			      <0x4ae0c000 0x600>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1400>,
+				 <1 0 0x4a003400 0x600>,
+				 <2 0 0x4ae0c000 0x600>;
+
+			scm_conf: tisyscon@0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x1400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			dra7_pmx_core: pinmux@1,0 {
+				compatible = "ti,dra7-padconf",
+					     "pinctrl-single";
+				reg = <1 0x0 0x0464>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x3fffffff>;
+			};
+		};
+
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
 			ti,hwmods = "counter_32k";
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
+			reg = <0xe00 0x4>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap5 {
 				regulator-name = "pbias_mmc_omap5";
 				regulator-min-microvolt = <1800000>;
@@ -230,17 +251,6 @@
 			};
 		};
 
-		dra7_pmx_core: pinmux@4a003400 {
-			compatible = "ti,dra7-padconf", "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1410,7 +1420,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&dcan1_sys_clk_mux>;
 			status = "disabled";
@@ -1420,7 +1430,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			syscon-raminit = <&scm_conf 0x558 1>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sys_clkin1>;
 			status = "disabled";
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
Date: Wed, 25 Feb 2015 21:04:44 +0200	[thread overview]
Message-ID: <1424891085-10392-35-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1424891085-10392-1-git-send-email-t-kristo@ti.com>

Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    1 +
 arch/arm/boot/dts/dra7.dtsi                        |   60 ++++++++++++--------
 2 files changed, 36 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 3574d67..f84f4ea 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -21,6 +21,7 @@ Required properties:
 		"ti,omap3-scrm"
 		"ti,omap4-ctrl"
 		"ti,omap5-ctrl"
+		"ti,dra7-ctrl"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..230d22d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -203,26 +203,47 @@
 			};
 		};
 
+		scm: scm at 4a002000 {
+			compatible = "ti,dra7-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1400>,
+			      <0x4a003400 0x600>,
+			      <0x4ae0c000 0x600>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1400>,
+				 <1 0 0x4a003400 0x600>,
+				 <2 0 0x4ae0c000 0x600>;
+
+			scm_conf: tisyscon at 0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x1400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			dra7_pmx_core: pinmux at 1,0 {
+				compatible = "ti,dra7-padconf",
+					     "pinctrl-single";
+				reg = <1 0x0 0x0464>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x3fffffff>;
+			};
+		};
+
 		counter32k: counter at 4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
 			ti,hwmods = "counter_32k";
 		};
 
-		dra7_ctrl_core: ctrl_core at 4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon at 4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
+			reg = <0xe00 0x4>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap5 {
 				regulator-name = "pbias_mmc_omap5";
 				regulator-min-microvolt = <1800000>;
@@ -230,17 +251,6 @@
 			};
 		};
 
-		dra7_pmx_core: pinmux at 4a003400 {
-			compatible = "ti,dra7-padconf", "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
 		sdma: dma-controller at 4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1410,7 +1420,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&dcan1_sys_clk_mux>;
 			status = "disabled";
@@ -1420,7 +1430,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			syscon-raminit = <&scm_conf 0x558 1>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sys_clkin1>;
 			status = "disabled";
-- 
1.7.9.5

  parent reply	other threads:[~2015-02-25 19:05 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-25 19:04 [PATCHv3 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1 Tero Kristo
2015-02-25 19:04 ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:08   ` Felipe Balbi
2015-02-25 19:08     ` Felipe Balbi
2015-02-25 19:04 ` [PATCHv3 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:09   ` Felipe Balbi
2015-02-25 19:09     ` Felipe Balbi
2015-02-25 19:44     ` Tero Kristo
2015-02-25 19:44       ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-03-06 19:18   ` Mike Turquette
2015-03-06 19:18     ` Mike Turquette
2015-03-17 18:38     ` Tony Lindgren
2015-03-17 18:38       ` Tony Lindgren
2015-03-18  7:06       ` Tero Kristo
2015-03-18  7:06         ` Tero Kristo
2015-03-18 17:02         ` Tony Lindgren
2015-03-18 17:02           ` Tony Lindgren
2015-03-19  7:14           ` Tero Kristo
2015-03-19  7:14             ` Tero Kristo
2015-03-20  7:00     ` Tero Kristo
2015-03-20  7:00       ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 13/35] ARM: OMAP2+: CM: determine CM base address from device tree Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 14/35] ARM: OMAP2+: PRM: determine PRM " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 15/35] ARM: OMAP2+: control: determine control module base address from DT Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 21/35] ARM: OMAP2+: clock: add low-level support for regmap Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 22/35] ARM: OMAP2+: control: remove API for getting control module base address Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 23/35] ARM: OMAP2+: id: cache omap_type value Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 24/35] ARM: OMAP2+: control: add syscon support for register accesses Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 25/35] ARM: dts: omap24xx: merge control module features under scrm node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 26/35] ARM: dts: omap3: " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 27/35] ARM: dts: am33xx: " Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 29/35] ARM: dts: am4372: merge control module features under scrm node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 30/35] ARM: dts: omap4: add system control module node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` [PATCHv3 33/35] ARM: dts: omap5: add system control module node Tero Kristo
2015-02-25 19:04   ` Tero Kristo
2015-02-25 19:04 ` Tero Kristo [this message]
2015-02-25 19:04   ` [PATCHv3 34/35] ARM: dts: dra7: " Tero Kristo
2015-03-11 17:17   ` Tony Lindgren
2015-03-11 17:17     ` Tony Lindgren
2015-03-11 19:08     ` Tero Kristo
2015-03-11 19:08       ` Tero Kristo
2015-03-11 19:26       ` Tony Lindgren
2015-03-11 19:26         ` Tony Lindgren
2015-03-11 19:57         ` Tero Kristo
2015-03-11 19:57           ` Tero Kristo
2015-03-11 21:00           ` Tony Lindgren
2015-03-11 21:00             ` Tony Lindgren
2015-02-25 19:04 ` [PATCHv3 35/35] ARM: OMAP4+: control: add support for initializing control module via DT Tero Kristo
2015-02-25 19:04   ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424891085-10392-35-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.