All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: linux-omap@vger.kernel.org, tony@atomide.com, paul@pwsan.com,
	sakari.ailus@iki.fi
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 26/35] ARM: dts: omap3: add minimal l4 bus layout with control module support
Date: Fri, 20 Mar 2015 20:44:37 +0200	[thread overview]
Message-ID: <1426877086-17131-27-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1426877086-17131-1-git-send-email-t-kristo@ti.com>

This patch creates an l4_core interconnect for OMAP3, and moves some
of the generic peripherals under it. System control module nodes are
moved under this new interconnect also, and the SCM clock layout
is changed to use the renamed SCM node as the clock provider.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Tony Lindgren <tony@atomide.com>
---
 Documentation/devicetree/bindings/arm/omap/l4.txt  |    1 +
 .../devicetree/bindings/arm/omap/prcm.txt          |    2 +-
 arch/arm/boot/dts/am3517.dtsi                      |    2 +-
 arch/arm/boot/dts/am35xx-clocks.dtsi               |    2 +-
 arch/arm/boot/dts/omap3.dtsi                       |   96 +++++++++++---------
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             |   13 +--
 arch/arm/mach-omap2/control.c                      |    2 +-
 7 files changed, 67 insertions(+), 51 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
index 57569cc8..6402022 100644
--- a/Documentation/devicetree/bindings/arm/omap/l4.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -5,6 +5,7 @@ These bindings describe the OMAP SoCs L4 interconnect bus.
 Required properties:
 - compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
 	       Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+	       Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
 - ranges : contains the IO map range for the bus
 
 Examples:
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index cce8365..ef5a74b 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -17,7 +17,7 @@ Required properties:
 		"ti,omap2-scm"
 		"ti,omap3-prm"
 		"ti,omap3-cm"
-		"ti,omap3-scrm"
+		"ti,omap3-scm"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index c90724b..f164dce 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -31,7 +31,7 @@
 			status = "disabled";
 			reg = <0x5c000000 0x30000>;
 			interrupts = <67 68 69 70>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0x10000>;
 			ti,davinci-ctrl-mod-reg-offset = <0>;
 			ti,davinci-ctrl-ram-offset = <0x20000>;
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index df489d3..518b8fd 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-&scrm_clocks {
+&scm_clocks {
 	emac_ick: emac_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..0020a7a8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -87,6 +87,60 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		l4_core: l4@48000000 {
+			compatible = "ti,omap3-l4-core", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000000>;
+
+			scm: scm@2000 {
+				compatible = "ti,omap3-scm", "simple-bus";
+				reg = <0x2000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				omap3_pmx_core: pinmux@30 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x230>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+
+				scm_conf: scm_conf@270 {
+					compatible = "syscon";
+					reg = <0x270 0x330>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+
+				omap3_pmx_wkup: pinmux@a00 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0xa00 0x5c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+			};
+		};
+
 		aes: aes@480c5000 {
 			compatible = "ti,omap3-aes";
 			ti,hwmods = "aes";
@@ -121,19 +175,6 @@
 			};
 		};
 
-		scrm: scrm@48002000 {
-			compatible = "ti,omap3-scrm";
-			reg = <0x48002000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -159,37 +200,10 @@
 			#dma-requests = <96>;
 		};
 
-		omap3_pmx_core: pinmux@48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux@48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon@48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 5c37500..bbba5bd 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -79,13 +79,14 @@
 		clock-div = <1>;
 	};
 };
-&scrm_clocks {
+
+&scm_clocks {
 	mcbsp5_mux_fck: mcbsp5_mux_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -99,7 +100,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -113,7 +114,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
@@ -126,7 +127,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -140,7 +141,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d125c4e..4fc6a70 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -670,7 +670,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
-	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
 	{ }
 };
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 26/35] ARM: dts: omap3: add minimal l4 bus layout with control module support
Date: Fri, 20 Mar 2015 20:44:37 +0200	[thread overview]
Message-ID: <1426877086-17131-27-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1426877086-17131-1-git-send-email-t-kristo@ti.com>

This patch creates an l4_core interconnect for OMAP3, and moves some
of the generic peripherals under it. System control module nodes are
moved under this new interconnect also, and the SCM clock layout
is changed to use the renamed SCM node as the clock provider.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Tony Lindgren <tony@atomide.com>
---
 Documentation/devicetree/bindings/arm/omap/l4.txt  |    1 +
 .../devicetree/bindings/arm/omap/prcm.txt          |    2 +-
 arch/arm/boot/dts/am3517.dtsi                      |    2 +-
 arch/arm/boot/dts/am35xx-clocks.dtsi               |    2 +-
 arch/arm/boot/dts/omap3.dtsi                       |   96 +++++++++++---------
 arch/arm/boot/dts/omap3xxx-clocks.dtsi             |   13 +--
 arch/arm/mach-omap2/control.c                      |    2 +-
 7 files changed, 67 insertions(+), 51 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
index 57569cc8..6402022 100644
--- a/Documentation/devicetree/bindings/arm/omap/l4.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -5,6 +5,7 @@ These bindings describe the OMAP SoCs L4 interconnect bus.
 Required properties:
 - compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
 	       Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+	       Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
 - ranges : contains the IO map range for the bus
 
 Examples:
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index cce8365..ef5a74b 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -17,7 +17,7 @@ Required properties:
 		"ti,omap2-scm"
 		"ti,omap3-prm"
 		"ti,omap3-cm"
-		"ti,omap3-scrm"
+		"ti,omap3-scm"
 		"ti,omap4-cm1"
 		"ti,omap4-prm"
 		"ti,omap4-cm2"
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index c90724b..f164dce 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -31,7 +31,7 @@
 			status = "disabled";
 			reg = <0x5c000000 0x30000>;
 			interrupts = <67 68 69 70>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0x10000>;
 			ti,davinci-ctrl-mod-reg-offset = <0>;
 			ti,davinci-ctrl-ram-offset = <0x20000>;
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index df489d3..518b8fd 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-&scrm_clocks {
+&scm_clocks {
 	emac_ick: emac_ick {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 01b7111..0020a7a8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -87,6 +87,60 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		l4_core: l4 at 48000000 {
+			compatible = "ti,omap3-l4-core", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000000>;
+
+			scm: scm at 2000 {
+				compatible = "ti,omap3-scm", "simple-bus";
+				reg = <0x2000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				omap3_pmx_core: pinmux at 30 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x230>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+
+				scm_conf: scm_conf at 270 {
+					compatible = "syscon";
+					reg = <0x270 0x330>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+
+				omap3_pmx_wkup: pinmux at a00 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0xa00 0x5c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+			};
+		};
+
 		aes: aes at 480c5000 {
 			compatible = "ti,omap3-aes";
 			ti,hwmods = "aes";
@@ -121,19 +175,6 @@
 			};
 		};
 
-		scrm: scrm at 48002000 {
-			compatible = "ti,omap3-scrm";
-			reg = <0x48002000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
 		counter32k: counter at 48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -159,37 +200,10 @@
 			#dma-requests = <96>;
 		};
 
-		omap3_pmx_core: pinmux at 48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux at 48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon at 48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
 			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap2430 {
 				regulator-name = "pbias_mmc_omap2430";
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 5c37500..bbba5bd 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -79,13 +79,14 @@
 		clock-div = <1>;
 	};
 };
-&scrm_clocks {
+
+&scm_clocks {
 	mcbsp5_mux_fck: mcbsp5_mux_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <4>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -99,7 +100,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&core_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -113,7 +114,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <6>;
-		reg = <0x0274>;
+		reg = <0x04>;
 	};
 
 	mcbsp2_fck: mcbsp2_fck {
@@ -126,7 +127,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp3_fck: mcbsp3_fck {
@@ -140,7 +141,7 @@
 		compatible = "ti,composite-mux-clock";
 		clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		ti,bit-shift = <2>;
-		reg = <0x02d8>;
+		reg = <0x68>;
 	};
 
 	mcbsp4_fck: mcbsp4_fck {
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d125c4e..4fc6a70 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -670,7 +670,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
-	{ .compatible = "ti,omap3-scrm", .data = &ctrl_data },
+	{ .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
 	{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
 	{ }
 };
-- 
1.7.9.5

  parent reply	other threads:[~2015-03-20 18:46 UTC|newest]

Thread overview: 122+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-20 18:44 [PATCHv5 00/35] ARM: OMAP2+: PRCM/SCM cleanups against 4.0-rc Tero Kristo
2015-03-20 18:44 ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 01/35] clk: ti: fix ti_clk_get_reg_addr error handling Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-24 18:51   ` Tero Kristo
2015-03-24 18:51     ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 02/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 03/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 04/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 05/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 06/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 07/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 08/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-25 15:12   ` Tero Kristo
2015-03-25 15:12     ` Tero Kristo
2015-03-25 23:17     ` Tony Lindgren
2015-03-25 23:17       ` Tony Lindgren
2015-03-26  7:24       ` Tero Kristo
2015-03-26  7:24         ` Tero Kristo
2015-03-26 10:55         ` Tero Kristo
2015-03-26 10:55           ` Tero Kristo
2015-03-26 17:30           ` Tony Lindgren
2015-03-26 17:30             ` Tony Lindgren
2015-03-26 18:49             ` Tero Kristo
2015-03-26 18:49               ` Tero Kristo
2015-03-27 13:06             ` Tero Kristo
2015-03-27 13:06               ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 13/35] ARM: OMAP2+: CM: determine CM base address from device tree Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 14/35] ARM: OMAP2+: PRM: determine PRM " Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 15/35] ARM: OMAP2+: control: determine control module base address from DT Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 21/35] ARM: OMAP2+: clock: add low-level support for regmap Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 22/35] ARM: OMAP2+: control: remove API for getting control module base address Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 23/35] ARM: OMAP2+: id: cache omap_type value Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 24/35] ARM: OMAP2+: control: add syscon support for register accesses Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 25/35] ARM: dts: omap24xx: add minimal l4 bus layout with control module support Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` Tero Kristo [this message]
2015-03-20 18:44   ` [PATCHv5 26/35] ARM: dts: omap3: " Tero Kristo
2015-03-30 22:56   ` Tony Lindgren
2015-03-30 22:56     ` Tony Lindgren
2015-03-31 14:57     ` Tero Kristo
2015-03-31 14:57       ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 27/35] ARM: dts: am33xx: " Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 21:43   ` Suman Anna
2015-03-20 21:43     ` Suman Anna
2015-03-20 22:35     ` Tony Lindgren
2015-03-20 22:35       ` Tony Lindgren
2015-03-20 23:23       ` Suman Anna
2015-03-20 23:23         ` Suman Anna
2015-03-20 23:30         ` Tony Lindgren
2015-03-20 23:30           ` Tony Lindgren
2015-03-23  6:35           ` Tero Kristo
2015-03-23  6:35             ` Tero Kristo
2015-03-25 15:02           ` Tero Kristo
2015-03-25 15:02             ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 29/35] ARM: dts: am4372: add minimal l4 bus layout with control module support Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-24 20:10   ` Suman Anna
2015-03-24 20:10     ` Suman Anna
2015-03-25  9:10     ` Tero Kristo
2015-03-25  9:10       ` Tero Kristo
2015-03-25 15:03       ` Tero Kristo
2015-03-25 15:03         ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 30/35] ARM: dts: omap4: " Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-30 23:01   ` Tony Lindgren
2015-03-30 23:01     ` Tony Lindgren
2015-03-31 14:58     ` Tero Kristo
2015-03-31 14:58       ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 33/35] ARM: dts: omap5: add minimal l4 bus layout with control module support Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 34/35] ARM: dts: dra7: " Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-20 18:44 ` [PATCHv5 35/35] ARM: OMAP4+: control: add support for initializing control module via DT Tero Kristo
2015-03-20 18:44   ` Tero Kristo
2015-03-31  0:10 ` [PATCHv5 00/35] ARM: OMAP2+: PRCM/SCM cleanups against 4.0-rc Tony Lindgren
2015-03-31  0:10   ` Tony Lindgren
2015-03-31  1:25   ` Tony Lindgren
2015-03-31  1:25     ` Tony Lindgren
2015-03-31 18:28     ` Tero Kristo
2015-03-31 18:28       ` Tero Kristo
2015-03-31 14:59   ` Tero Kristo
2015-03-31 14:59     ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426877086-17131-27-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=sakari.ailus@iki.fi \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.