[patch added to the 3.12 stable tree] drivers: parport: Kconfig: exclude arm64 for PARPORT_PC

[patch added to the 3.12 stable tree] drivers: parport: Kconfig: exclude arm64 for PARPORT_PC

[Jiri Slaby]

From: Guenter Roeck <linux@roeck-us.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

Fix build problem seen with arm64:allmodconfig.

drivers/parport/parport_pc.c:67:25: fatal error: asm/parport.h: No such file or
directory

arm64 does not support PARPORT_PC.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/parport/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 70694ce38be2..46d2de24bf3e 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -37,7 +37,7 @@ config PARPORT_PC
 	tristate "PC-style hardware"
 	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
 		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
-		!XTENSA && !CRIS && !H8300
+		!XTENSA && !CRIS && !H8300 && !ARM64
 
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: gadget: composite: enable BESL support

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a6615937bcd9234e6d6bb817c3701fce44d0a84d upstream.

According to USB 2.0 ECN Errata for Link Power
Management (USB2-LPM-Errata-final.pdf), BESL
must be enabled if LPM is enabled.

This helps with USB30CV TD 9.21 LPM L1
Suspend Resume Test.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/gadget/composite.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7c0adb9812aa..a0b5a13b52b0 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -528,7 +528,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
 	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
 	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
-	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
 
 	/*
 	 * The Superspeed USB Capability descriptor shall be implemented by all
-- 
2.3.5

[patch added to the 3.12 stable tree] nosave: consolidate __nosave_{begin,end} in <asm/sections.h>

[Jiri Slaby]

From: Geert Uytterhoeven <geert@linux-m68k.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 7f8998c7aef3ac9c5f3f2943e083dfa6302e90d0 upstream.

The different architectures used their own (and different) declarations:

    extern __visible const void __nosave_begin, __nosave_end;
    extern const void __nosave_begin, __nosave_end;
    extern long __nosave_begin, __nosave_end;

Consolidate them using the first variant in <asm/sections.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[js -- port to 3.12: arm does not have hibernation yet]
---
 arch/mips/include/asm/suspend.h   | 7 -------
 arch/mips/power/cpu.c             | 2 +-
 arch/powerpc/kernel/suspend.c     | 4 +---
 arch/s390/kernel/suspend.c        | 6 +-----
 arch/sh/include/asm/sections.h    | 1 -
 arch/sparc/power/hibernate.c      | 4 +---
 arch/unicore32/include/mach/pm.h  | 3 ---
 arch/unicore32/kernel/hibernate.c | 1 +
 arch/x86/power/hibernate_32.c     | 4 +---
 arch/x86/power/hibernate_64.c     | 4 +---
 include/asm-generic/sections.h    | 4 ++++
 11 files changed, 11 insertions(+), 29 deletions(-)
 delete mode 100644 arch/mips/include/asm/suspend.h

diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
deleted file mode 100644
index 3adac3b53d19..000000000000
--- a/arch/mips/include/asm/suspend.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SUSPEND_H
-#define __ASM_SUSPEND_H
-
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
-#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c
index 521e5963df05..2129e67723ff 100644
--- a/arch/mips/power/cpu.c
+++ b/arch/mips/power/cpu.c
@@ -7,7 +7,7 @@
  * Author: Hu Hongbing <huhb@lemote.com>
  *	   Wu Zhangjin <wuzhangjin@gmail.com>
  */
-#include <asm/suspend.h>
+#include <asm/sections.h>
 #include <asm/fpu.h>
 #include <asm/dsp.h>
 
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 0167d53da30c..a531154cc0f3 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -9,9 +9,7 @@
 
 #include <linux/mm.h>
 #include <asm/page.h>
-
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
+#include <asm/sections.h>
 
 /*
  *	pfn_is_nosave - check if given pfn is in the 'nosave' section
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
index a7a7537ce1e7..1c4c5accd220 100644
--- a/arch/s390/kernel/suspend.c
+++ b/arch/s390/kernel/suspend.c
@@ -13,14 +13,10 @@
 #include <asm/ipl.h>
 #include <asm/cio.h>
 #include <asm/pci.h>
+#include <asm/sections.h>
 #include "entry.h"
 
 /*
- * References to section boundaries
- */
-extern const void __nosave_begin, __nosave_end;
-
-/*
  * The restore of the saved pages in an hibernation image will set
  * the change and referenced bits in the storage key for each page.
  * Overindication of the referenced bits after an hibernation cycle
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 1b6199740e98..7a99e6af6372 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -3,7 +3,6 @@
 
 #include <asm-generic/sections.h>
 
-extern long __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char __start_eh_frame[], __stop_eh_frame[];
diff --git a/arch/sparc/power/hibernate.c b/arch/sparc/power/hibernate.c
index 42b0b8ce699a..17bd2e167e07 100644
--- a/arch/sparc/power/hibernate.c
+++ b/arch/sparc/power/hibernate.c
@@ -9,11 +9,9 @@
 #include <asm/hibernate.h>
 #include <asm/visasm.h>
 #include <asm/page.h>
+#include <asm/sections.h>
 #include <asm/tlb.h>
 
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
 struct saved_context saved_context;
 
 /*
diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h
index 4dcd34ae194c..77b522694e74 100644
--- a/arch/unicore32/include/mach/pm.h
+++ b/arch/unicore32/include/mach/pm.h
@@ -36,8 +36,5 @@ extern int puv3_pm_enter(suspend_state_t state);
 /* Defined in hibernate_asm.S */
 extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist);
 
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
 extern struct pbe *restore_pblist;
 #endif
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
index d75ef8b6cb56..9969ec374abb 100644
--- a/arch/unicore32/kernel/hibernate.c
+++ b/arch/unicore32/kernel/hibernate.c
@@ -18,6 +18,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/sections.h>
 #include <asm/suspend.h>
 
 #include "mach/pm.h"
diff --git a/arch/x86/power/hibernate_32.c b/arch/x86/power/hibernate_32.c
index 7d28c885d238..291226b952a9 100644
--- a/arch/x86/power/hibernate_32.c
+++ b/arch/x86/power/hibernate_32.c
@@ -13,13 +13,11 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mmzone.h>
+#include <asm/sections.h>
 
 /* Defined in hibernate_asm_32.S */
 extern int restore_image(void);
 
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
 /* Pointer to the temporary resume page tables */
 pgd_t *resume_pg_dir;
 
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index 304fca20d96e..2276238fde6f 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -17,11 +17,9 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mtrr.h>
+#include <asm/sections.h>
 #include <asm/suspend.h>
 
-/* References to section boundaries */
-extern __visible const void __nosave_begin, __nosave_end;
-
 /* Defined in hibernate_asm_64.S */
 extern asmlinkage int restore_image(void);
 
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index f1a24b5c3b90..b58fd667f87b 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -3,6 +3,8 @@
 
 /* References to section boundaries */
 
+#include <linux/compiler.h>
+
 /*
  * Usage guidelines:
  * _text, _data: architecture specific, don't use them in arch-independent code
@@ -37,6 +39,8 @@ extern char __start_rodata[], __end_rodata[];
 /* Start and end of .ctors section - used for constructor calls. */
 extern char __ctors_start[], __ctors_end[];
 
+extern __visible const void __nosave_begin, __nosave_end;
+
 /* function descriptor handling (if any).  Override
  * in asm/sections.h */
 #ifndef dereference_function_descriptor
-- 
2.3.5

[patch added to the 3.12 stable tree] KVM: s390: Zero out current VMDB of STSI before including level3 data.

[Jiri Slaby]

From: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b75f4c9afac2604feb971441116c07a24ecca1ec upstream.

s390 documentation requires words 0 and 10-15 to be reserved and stored as
zeros. As we fill out all other fields, we can memset the full structure.

Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/s390/kvm/priv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 59200ee275e5..563d7d883ac4 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -355,6 +355,7 @@ static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 	for (n = mem->count - 1; n > 0 ; n--)
 		memcpy(&mem->vm[n], &mem->vm[n - 1], sizeof(mem->vm[0]));
 
+	memset(&mem->vm[0], 0, sizeof(mem->vm[0]));
 	mem->vm[0].cpus_total = cpus;
 	mem->vm[0].cpus_configured = cpus;
 	mem->vm[0].cpus_standby = 0;
-- 
2.3.5

[patch added to the 3.12 stable tree] s390/hibernate: fix save and restore of kernel text section

[Jiri Slaby]

From: Heiko Carstens <heiko.carstens@de.ibm.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit d74419495633493c9cd3f2bbeb7f3529d0edded6 upstream.

Sebastian reported a crash caused by a jump label mismatch after resume.
This happens because we do not save the kernel text section during suspend
and therefore also do not restore it during resume, but use the kernel image
that restores the old system.

This means that after a suspend/resume cycle we lost all modifications done
to the kernel text section.
The reason for this is the pfn_is_nosave() function, which incorrectly
returns that read-only pages don't need to be saved. This is incorrect since
we mark the kernel text section read-only.
We still need to make sure to not save and restore pages contained within
NSS and DCSS segment.
To fix this add an extra case for the kernel text section and only save
those pages if they are not contained within an NSS segment.

Fixes the following crash (and the above bugs as well):

Jump label code mismatch at netif_receive_skb_internal+0x28/0xd0
Found:    c0 04 00 00 00 00
Expected: c0 f4 00 00 00 11
New:      c0 04 00 00 00 00
Kernel panic - not syncing: Corrupted kernel text
CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.19.0-01975-gb1b096e70f23 #4
Call Trace:
  [<0000000000113972>] show_stack+0x72/0xf0
  [<000000000081f15e>] dump_stack+0x6e/0x90
  [<000000000081c4e8>] panic+0x108/0x2b0
  [<000000000081be64>] jump_label_bug.isra.2+0x104/0x108
  [<0000000000112176>] __jump_label_transform+0x9e/0xd0
  [<00000000001121e6>] __sm_arch_jump_label_transform+0x3e/0x50
  [<00000000001d1136>] multi_cpu_stop+0x12e/0x170
  [<00000000001d1472>] cpu_stopper_thread+0xb2/0x168
  [<000000000015d2ac>] smpboot_thread_fn+0x134/0x1b0
  [<0000000000158baa>] kthread+0x10a/0x110
  [<0000000000824a86>] kernel_thread_starter+0x6/0xc

Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/s390/kernel/suspend.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
index 1c4c5accd220..d3236c9e226b 100644
--- a/arch/s390/kernel/suspend.c
+++ b/arch/s390/kernel/suspend.c
@@ -138,6 +138,8 @@ int pfn_is_nosave(unsigned long pfn)
 {
 	unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin));
 	unsigned long nosave_end_pfn = PFN_DOWN(__pa(&__nosave_end));
+	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
 
 	/* Always save lowcore pages (LC protection might be enabled). */
 	if (pfn <= LC_PAGES)
@@ -145,6 +147,8 @@ int pfn_is_nosave(unsigned long pfn)
 	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
 		return 1;
 	/* Skip memory holes and read-only pages (NSS, DCSS, ...). */
+	if (pfn >= stext_pfn && pfn <= eshared_pfn)
+		return ipl_info.type == IPL_TYPE_NSS ? 1 : 0;
 	if (tprot(PFN_PHYS(pfn)))
 		return 1;
 	return 0;
-- 
2.3.5

[patch added to the 3.12 stable tree] KVM: use slowpath for cross page cached accesses

[Jiri Slaby]

From: Radim Krčmář <rkrcmar@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit ca3f0874723fad81d0c701b63ae3a17a408d5f25 upstream.

kvm_write_guest_cached() does not mark all written pages as dirty and
code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot
with cross page accesses.  Fix all the easy way.

The check is '<= 1' to have the same result for 'len = 0' cache anywhere
in the page.  (nr_pages_needed is 0 on page boundary.)

Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <20150408121648.GA3519@potion.brq.redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 virt/kvm/kvm_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index e068d0017fb8..a3510441f7d7 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1540,8 +1540,8 @@ int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
 	ghc->generation = slots->generation;
 	ghc->len = len;
 	ghc->memslot = gfn_to_memslot(kvm, start_gfn);
-	ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, &nr_pages_avail);
-	if (!kvm_is_error_hva(ghc->hva) && nr_pages_avail >= nr_pages_needed) {
+	ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, NULL);
+	if (!kvm_is_error_hva(ghc->hva) && nr_pages_needed <= 1) {
 		ghc->hva += offset;
 	} else {
 		/*
-- 
2.3.5

[patch added to the 3.12 stable tree] MIPS: Hibernate: flush TLB entries earlier

[Jiri Slaby]

From: Huacai Chen <chenhc@lemote.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a843d00d038b11267279e3b5388222320f9ddc1d upstream.

We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9621/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/power/hibernate.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 32a7c828f073..e7567c8a9e79 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -30,6 +30,8 @@ LEAF(swsusp_arch_suspend)
 END(swsusp_arch_suspend)
 
 LEAF(swsusp_arch_resume)
+	/* Avoid TLB mismatch during and after kernel resume */
+	jal local_flush_tlb_all
 	PTR_L t0, restore_pblist
 0:
 	PTR_L t1, PBE_ADDRESS(t0)   /* source */
@@ -43,7 +45,6 @@ LEAF(swsusp_arch_resume)
 	bne t1, t3, 1b
 	PTR_L t0, PBE_NEXT(t0)
 	bnez t0, 0b
-	jal local_flush_tlb_all /* Avoid TLB mismatch after kernel resume */
 	PTR_LA t0, saved_regs
 	PTR_L ra, PT_R31(t0)
 	PTR_L sp, PT_R29(t0)
-- 
2.3.5

[patch added to the 3.12 stable tree] cdc-wdm: fix endianness bug in debug statements

[Jiri Slaby]

From: Oliver Neukum <oneukum@suse.de>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 323ece54e0761198946ecd0c2091f1d2bfdfcb64 upstream.

Values directly from descriptors given in debug statements
must be converted to native endianness.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/class/cdc-wdm.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 6463ca3bcfba..07133d0c971b 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -244,7 +244,7 @@ static void wdm_int_callback(struct urb *urb)
 	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
 		dev_dbg(&desc->intf->dev,
 			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
-			dr->wIndex, dr->wLength);
+			le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
 		break;
 
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
@@ -257,7 +257,9 @@ static void wdm_int_callback(struct urb *urb)
 		clear_bit(WDM_POLL_RUNNING, &desc->flags);
 		dev_err(&desc->intf->dev,
 			"unknown notification %d received: index %d len %d\n",
-			dr->bNotificationType, dr->wIndex, dr->wLength);
+			dr->bNotificationType,
+			le16_to_cpu(dr->wIndex),
+			le16_to_cpu(dr->wLength));
 		goto exit;
 	}
 
@@ -403,7 +405,7 @@ static ssize_t wdm_write
 			     USB_RECIP_INTERFACE);
 	req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
 	req->wValue = 0;
-	req->wIndex = desc->inum;
+	req->wIndex = desc->inum; /* already converted */
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
 	desc->outbuf = buf;
@@ -417,7 +419,7 @@ static ssize_t wdm_write
 		rv = usb_translate_errors(rv);
 	} else {
 		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
-			req->wIndex);
+			le16_to_cpu(req->wIndex));
 	}
 out:
 	usb_autopm_put_interface(desc->intf);
@@ -780,7 +782,7 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
 	desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
 	desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
 	desc->irq->wValue = 0;
-	desc->irq->wIndex = desc->inum;
+	desc->irq->wIndex = desc->inum; /* already converted */
 	desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
 
 	usb_fill_control_urb(
-- 
2.3.5

[patch added to the 3.12 stable tree] spi: spidev: fix possible arithmetic overflow for multi-transfer message

[Jiri Slaby]

From: Ian Abbott <abbotti@mev.co.uk>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f20fbaad7620af2df36a1f9d1c9ecf48ead5b747 upstream.

`spidev_message()` sums the lengths of the individual SPI transfers to
determine the overall SPI message length.  It restricts the total
length, returning an error if too long, but it does not check for
arithmetic overflow.  For example, if the SPI message consisted of two
transfers and the first has a length of 10 and the second has a length
of (__u32)(-1), the total length would be seen as 9, even though the
second transfer is actually very long.  If the second transfer specifies
a null `rx_buf` and a non-null `tx_buf`, the `copy_from_user()` could
overrun the spidev's pre-allocated tx buffer before it reaches an
invalid user memory address.  Fix it by checking that neither the total
nor the individual transfer lengths exceed the maximum allowed value.

Thanks to Dan Carpenter for reporting the potential integer overflow.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/spi/spidev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index ca5bcfe874d0..2466632c2c01 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -243,7 +243,10 @@ static int spidev_message(struct spidev_data *spidev,
 		k_tmp->len = u_tmp->len;
 
 		total += k_tmp->len;
-		if (total > bufsiz) {
+		/* Check total length of transfers.  Also check each
+		 * transfer length to avoid arithmetic overflow.
+		 */
+		if (total > bufsiz || k_tmp->len > bufsiz) {
 			status = -EMSGSIZE;
 			goto done;
 		}
-- 
2.3.5

[patch added to the 3.12 stable tree] compal-laptop: Check return value of power_supply_register

[Jiri Slaby]

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 1915a718b1872edffcb13e5436a9f7302d3d36f0 upstream.

The return value of power_supply_register() call was not checked and
even on error probe() function returned 0. If registering failed then
during unbind the driver tried to unregister power supply which was not
actually registered.

This could lead to memory corruption because power_supply_unregister()
unconditionally cleans up given power supply.

Fix this by checking return status of power_supply_register() call. In
case of failure, clean up sysfs entries and fail the probe.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 9be0fcb5ed46 ("compal-laptop: add JHL90, battery & hwmon interface")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz> [backport to 3.12]
---
 drivers/platform/x86/compal-laptop.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index eaa78edb1f4e..b978cd3556a4 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -1049,7 +1049,13 @@ static int compal_probe(struct platform_device *pdev)
 
 	/* Power supply */
 	initialize_power_supply_data(data);
-	power_supply_register(&compal_device->dev, &data->psy);
+	err = power_supply_register(&compal_device->dev, &data->psy);
+	if (err < 0) {
+		hwmon_device_unregister(data->hwmon_dev);
+		sysfs_remove_group(&pdev->dev.kobj, &compal_attribute_group);
+		kfree(data);
+		return err;
+	}
 
 	platform_set_drvdata(pdev, data);
 
-- 
2.3.5

[patch added to the 3.12 stable tree] ring-buffer: Replace this_cpu_*() with __this_cpu_*()

[Jiri Slaby]

From: Steven Rostedt <rostedt@goodmis.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 80a9b64e2c156b6523e7a01f2ba6e5d86e722814 upstream.

It has come to my attention that this_cpu_read/write are horrible on
architectures other than x86. Worse yet, they actually disable
preemption or interrupts! This caused some unexpected tracing results
on ARM.

   101.356868: preempt_count_add <-ring_buffer_lock_reserve
   101.356870: preempt_count_sub <-ring_buffer_lock_reserve

The ring_buffer_lock_reserve has recursion protection that requires
accessing a per cpu variable. But since preempt_disable() is traced, it
too got traced while accessing the variable that is suppose to prevent
recursion like this.

The generic version of this_cpu_read() and write() are:

 #define this_cpu_generic_read(pcp)					\
 ({	typeof(pcp) ret__;						\
	preempt_disable();						\
	ret__ = *this_cpu_ptr(&(pcp));					\
	preempt_enable();						\
	ret__;								\
 })

 #define this_cpu_generic_to_op(pcp, val, op)				\
 do {									\
	unsigned long flags;						\
	raw_local_irq_save(flags);					\
	*__this_cpu_ptr(&(pcp)) op val;					\
	raw_local_irq_restore(flags);					\
 } while (0)

Which is unacceptable for locations that know they are within preempt
disabled or interrupt disabled locations.

Paul McKenney stated that __this_cpu_() versions produce much better code on
other architectures than this_cpu_() does, if we know that the call is done in
a preempt disabled location.

I also changed the recursive_unlock() to use two local variables instead
of accessing the per_cpu variable twice.

Link: http://lkml.kernel.org/r/20150317114411.GE3589@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20150317104038.312e73d1@gandalf.local.home

Acked-by: Christoph Lameter <cl@linux.com>
Reported-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 kernel/trace/ring_buffer.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 21ee379e3e4b..469af802d14e 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2651,7 +2651,7 @@ static DEFINE_PER_CPU(unsigned int, current_context);
 
 static __always_inline int trace_recursive_lock(void)
 {
-	unsigned int val = this_cpu_read(current_context);
+	unsigned int val = __this_cpu_read(current_context);
 	int bit;
 
 	if (in_interrupt()) {
@@ -2668,18 +2668,17 @@ static __always_inline int trace_recursive_lock(void)
 		return 1;
 
 	val |= (1 << bit);
-	this_cpu_write(current_context, val);
+	__this_cpu_write(current_context, val);
 
 	return 0;
 }
 
 static __always_inline void trace_recursive_unlock(void)
 {
-	unsigned int val = this_cpu_read(current_context);
+	unsigned int val = __this_cpu_read(current_context);
 
-	val--;
-	val &= this_cpu_read(current_context);
-	this_cpu_write(current_context, val);
+	val &= val & (val - 1);
+	__this_cpu_write(current_context, val);
 }
 
 #else
-- 
2.3.5

[patch added to the 3.12 stable tree] power_supply: twl4030_madc: Check return value of power_supply_register

[Jiri Slaby]

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 68c3ed6fa7e0d69529ced772d650ab128916a81d upstream.

The return value of power_supply_register() call was not checked and
even on error probe() function returned 0. If registering failed then
during unbind the driver tried to unregister power supply which was not
actually registered.

This could lead to memory corruption because power_supply_unregister()
unconditionally cleans up given power supply.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: da0a00ebc239 ("power: Add twl4030_madc battery driver.")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/power/twl4030_madc_battery.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/power/twl4030_madc_battery.c b/drivers/power/twl4030_madc_battery.c
index 7ef445a6cfa6..cf907609ec49 100644
--- a/drivers/power/twl4030_madc_battery.c
+++ b/drivers/power/twl4030_madc_battery.c
@@ -192,6 +192,7 @@ static int twl4030_madc_battery_probe(struct platform_device *pdev)
 {
 	struct twl4030_madc_battery *twl4030_madc_bat;
 	struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
+	int ret = 0;
 
 	twl4030_madc_bat = kzalloc(sizeof(*twl4030_madc_bat), GFP_KERNEL);
 	if (!twl4030_madc_bat)
@@ -216,9 +217,11 @@ static int twl4030_madc_battery_probe(struct platform_device *pdev)
 
 	twl4030_madc_bat->pdata = pdata;
 	platform_set_drvdata(pdev, twl4030_madc_bat);
-	power_supply_register(&pdev->dev, &twl4030_madc_bat->psy);
+	ret = power_supply_register(&pdev->dev, &twl4030_madc_bat->psy);
+	if (ret < 0)
+		kfree(twl4030_madc_bat);
 
-	return 0;
+	return ret;
 }
 
 static int twl4030_madc_battery_remove(struct platform_device *pdev)
-- 
2.3.5

[patch added to the 3.12 stable tree] power_supply: lp8788-charger: Fix leaked power supply on probe fail

[Jiri Slaby]

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a7117f81e8391e035c49b3440792f7e6cea28173 upstream.

Driver forgot to unregister charger power supply if registering of
battery supply failed in probe(). In such case the memory associated
with power supply leaked.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/power/lp8788-charger.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
index ed49b50b220b..72da2a6c22db 100644
--- a/drivers/power/lp8788-charger.c
+++ b/drivers/power/lp8788-charger.c
@@ -417,8 +417,10 @@ static int lp8788_psy_register(struct platform_device *pdev,
 	pchg->battery.num_properties = ARRAY_SIZE(lp8788_battery_prop);
 	pchg->battery.get_property = lp8788_battery_get_property;
 
-	if (power_supply_register(&pdev->dev, &pchg->battery))
+	if (power_supply_register(&pdev->dev, &pchg->battery)) {
+		power_supply_unregister(&pchg->charger);
 		return -EPERM;
+	}
 
 	return 0;
 }
-- 
2.3.5

[patch added to the 3.12 stable tree] ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASE

[Jiri Slaby]

From: Andrey Ryabinin <a.ryabinin@samsung.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8defb3367fcd19d1af64c07792aade0747b54e0f upstream.

Usually ELF_ET_DYN_BASE is 2/3 of TASK_SIZE. With 3G/1G user/kernel
split this is not so, because 2*TASK_SIZE overflows 32 bits,
so the actual value of ELF_ET_DYN_BASE is:
	(2 * TASK_SIZE / 3) = 0x2a000000

When ASLR is disabled PIE binaries will load at ELF_ET_DYN_BASE address.
On 32bit platforms AddressSanitzer uses addresses [0x20000000 - 0x40000000]
for shadow memory [1]. So ASan doesn't work for PIE binaries when ASLR disabled
as it fails to map shadow memory.
Also after Kees's 'split ET_DYN ASLR from mmap ASLR' patchset PIE binaries
has a high chance of loading somewhere in between [0x2a000000 - 0x40000000]
even if ASLR enabled. This makes ASan with PIE absolutely incompatible.

Fix overflow by dividing TASK_SIZE prior to multiplying.
After this patch ELF_ET_DYN_BASE equals to (for CONFIG_VMSPLIT_3G=y):
	(TASK_SIZE / 3 * 2) = 0x7f555554

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerAlgorithm#Mapping

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reported-by: Maria Guseva <m.guseva@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/include/asm/elf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index f4b46d39b9cf..051b7269e639 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -114,7 +114,7 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
    the loader.  We need to make sure that it is out of the way of the program
    that it will "exec", and that there is sufficient room for the brk.  */
 
-#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+#define ELF_ET_DYN_BASE	(TASK_SIZE / 3 * 2)
 
 /* When the program starts, a1 contains a pointer to a function to be 
    registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
-- 
2.3.5

[patch added to the 3.12 stable tree] ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore

[Jiri Slaby]

From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 4e330ae4ab2915444f1e6dca1358a910aa259362 upstream.

There are two PMICs on Cragganmore, currently one dynamically assign
its IRQ base and the other uses a fixed base. It is possible for the
statically assigned PMIC to fail if its IRQ is taken by the dynamically
assigned one. Fix this by statically assigning both the IRQ bases.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/mach-s3c64xx/crag6410.h      | 1 +
 arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
index 4c3c9994fc2c..81dc722ced57 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c64xx/crag6410.h
@@ -14,6 +14,7 @@
 #include <linux/gpio.h>
 
 #define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE		(IRQ_BOARD_START + 64)
 
 #define PCA935X_GPIO_BASE		GPIO_BOARD_START
 #define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1aca42..27180bd93832 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -558,6 +558,7 @@ static struct wm831x_touch_pdata touch_pdata = {
 
 static struct wm831x_pdata crag_pmic_pdata = {
 	.wm831x_num = 1,
+	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = BANFF_PMIC_GPIO_BASE,
 	.soft_shutdown = true,
 
-- 
2.3.5

[patch added to the 3.12 stable tree] ARM: dts: dove: Fix uart[23] reg property

[Jiri Slaby]

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a74cd13b807029397f7232449df929bac11fb228 upstream.

Fix Dove's register addresses of uart2 and uart3 nodes that seem to
be broken since ages due to a copy-and-paste error.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm/boot/dts/dove.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index cc279166646f..72bf0257ab78 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -106,7 +106,7 @@
 
 		uart2: serial@12200 {
 			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
+			reg = <0x12200 0x100>;
 			reg-shift = <2>;
 			interrupts = <9>;
 			clocks = <&core_clk 0>;
@@ -115,7 +115,7 @@
 
 		uart3: serial@12300 {
 			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
+			reg = <0x12300 0x100>;
 			reg-shift = <2>;
 			interrupts = <10>;
 			clocks = <&core_clk 0>;
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: phy: Find the right match in devm_usb_phy_match

[Jiri Slaby]

From: Axel Lin <axel.lin@ingics.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 869aee0f31429fa9d94d5aef539602b73ae0cf4b upstream.

The res parameter passed to devm_usb_phy_match() is the location where the
pointer to the usb_phy is stored, hence it needs to be dereferenced before
comparing to the match data in order to find the correct match.

Fixes: 410219dcd2ba ("usb: otg: utils: devres: Add API's to associate a device with the phy")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/phy/phy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 5d7966b8fe98..4fee0cce3dce 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -78,7 +78,9 @@ static void devm_usb_phy_release(struct device *dev, void *res)
 
 static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
 {
-	return res == match_data;
+	struct usb_phy **phy = res;
+
+	return *phy == match_data;
 }
 
 /**
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: define a generic USB_RESUME_TIMEOUT macro

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 62f0342de1f012f3e90607d39e20fce811391169 upstream.

Every USB Host controller should use this new
macro to define for how long resume signalling
should be driven on the bus.

Currently, almost every single USB controller
is using a 20ms timeout for resume signalling.

That's problematic for two reasons:

a) sometimes that 20ms timer expires a little
before 20ms, which makes us fail certification

b) some (many) devices actually need more than
20ms resume signalling.

Sure, in case of (b) we can state that the device
is against the USB spec, but the fact is that
we have no control over which device the certification
lab will use. We also have no control over which host
they will use. Most likely they'll be using a Windows
PC which, again, we have no control over how that
USB stack is written and how long resume signalling
they are using.

At the end of the day, we must make sure Linux passes
electrical compliance when working as Host or as Device
and currently we don't pass compliance as host because
we're driving resume signallig for exactly 20ms and
that confuses certification test setup resulting in
Certification failure.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/linux/usb.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/include/linux/usb.h b/include/linux/usb.h
index 39cfa0aca91f..6b37946481e8 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -206,6 +206,32 @@ void usb_put_intf(struct usb_interface *intf);
 #define USB_MAXINTERFACES	32
 #define USB_MAXIADS		(USB_MAXINTERFACES/2)
 
+/*
+ * USB Resume Timer: Every Host controller driver should drive the resume
+ * signalling on the bus for the amount of time defined by this macro.
+ *
+ * That way we will have a 'stable' behavior among all HCDs supported by Linux.
+ *
+ * Note that the USB Specification states we should drive resume for *at least*
+ * 20 ms, but it doesn't give an upper bound. This creates two possible
+ * situations which we want to avoid:
+ *
+ * (a) sometimes an msleep(20) might expire slightly before 20 ms, which causes
+ * us to fail USB Electrical Tests, thus failing Certification
+ *
+ * (b) Some (many) devices actually need more than 20 ms of resume signalling,
+ * and while we can argue that's against the USB Specification, we don't have
+ * control over which devices a certification laboratory will be using for
+ * certification. If CertLab uses a device which was tested against Windows and
+ * that happens to have relaxed resume signalling rules, we might fall into
+ * situations where we fail interoperability and electrical tests.
+ *
+ * In order to avoid both conditions, we're using a 40 ms resume timeout, which
+ * should cope with both LPJ calibration errors and devices not following every
+ * detail of the USB Specification.
+ */
+#define USB_RESUME_TIMEOUT	40 /* ms */
+
 /**
  * struct usb_interface_cache - long-term representation of a device interface
  * @num_altsetting: number of altsettings defined.
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: fusbh200: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 595227db1f2d98bfc33f02a55842f268e12b247d upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/fusbh200-hcd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index 299253c826c7..0def3ed72013 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1610,10 +1610,9 @@ static int fusbh200_hub_control (
 			if ((temp & PORT_PE) == 0)
 				goto error;
 
-			/* resume signaling for 20 msec */
 			fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg);
 			fusbh200->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fusbh200->port_c_suspend);
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: uhci: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b8fb6f79f76f478acbbffccc966daa878f172a0a upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/uhci-hub.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 9189bc984c98..a3e9f986af6c 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(25);
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				usb_hcd_start_port_resume(
 						&uhci_to_hcd(uhci)->self, port);
 
@@ -337,7 +337,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			uhci_finish_suspend(uhci, port, port_addr);
 
 			/* USB v2.0 7.1.7.5 */
-			uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
+			uhci->ports_timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			OK(0);
 		case USB_PORT_FEAT_POWER:
 			/* UHCI has no power switching */
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: fotg210: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 7e136bb71a08e8b8be3bc492f041d9b0bea3856d upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/fotg210-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index fce13bcc4a3e..be85c69ad49e 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1651,7 +1651,7 @@ static int fotg210_hub_control(
 			/* resume signaling for 20 msec */
 			fotg210_writel(fotg210, temp | PORT_RESUME, status_reg);
 			fotg210->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fotg210->port_c_suspend);
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: r8a66597: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 7a606ac29752a3e571b83f9b3fceb1eaa1d37781 upstream.

While this driver was already using a 50ms resume
timeout, let's make sure everybody uses the same
macro so it's easy to fix later should anything
go wrong.

It also gives a more "stable" expectation to Linux
users.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/r8a66597-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2ad004ae747c..736f4370abf8 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2301,7 +2301,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 		rh->port &= ~USB_PORT_STAT_SUSPEND;
 		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
-		msleep(50);
+		msleep(USB_RESUME_TIMEOUT);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
 	}
 
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: isp116x: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8c0ae6574ccfd3d619876a65829aad74c9d22ba5 upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/isp116x-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index c7d0f8f231be..200d33fc4a46 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1488,7 +1488,7 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
 	spin_unlock_irq(&isp116x->lock);
 
 	hcd->state = HC_STATE_RESUMING;
-	msleep(20);
+	msleep(USB_RESUME_TIMEOUT);
 
 	/* Go operational */
 	spin_lock_irq(&isp116x->lock);
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: xhci: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b9e451885deb6262dbaf5cd14aa77d192d9ac759 upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/xhci-ring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bf308798a2d..75dc6647ba22 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1735,7 +1735,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
-				msecs_to_jiffies(20);
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(faked_port_index, &bus_state->resuming_ports);
 			mod_timer(&hcd->rh_timer,
 				  bus_state->resume_done[faked_port_index]);
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: host: sl811: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 08debfb13b199716da6153940c31968c556b195d upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/host/sl811-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 5477bf5df218..6b488be61508 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1260,7 +1260,7 @@ sl811h_hub_control(
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
 
 			mod_timer(&sl811->timer, jiffies
-					+ msecs_to_jiffies(20));
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
 			break;
 		case USB_PORT_FEAT_POWER:
 			port_power(sl811, 0);
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: dwc2: hcd: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 74bd7b69801819707713b88e9d0bc074efa2f5e7 upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/staging/dwc2/hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c
index da0d35cc33ce..690e468e9a85 100644
--- a/drivers/staging/dwc2/hcd.c
+++ b/drivers/staging/dwc2/hcd.c
@@ -1462,7 +1462,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 			dev_dbg(hsotg->dev,
 				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
 			writel(0, hsotg->regs + PCGCTL);
-			usleep_range(20000, 40000);
+			msleep(USB_RESUME_TIMEOUT);
 
 			hprt0 = dwc2_read_hprt0(hsotg);
 			hprt0 |= HPRT0_RES;
-- 
2.3.5

[patch added to the 3.12 stable tree] usb: core: hub: use new USB_RESUME_TIMEOUT

[Jiri Slaby]

From: Felipe Balbi <balbi@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit bbc78c07a51f6fd29c227b1220a9016e585358ba upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/core/hub.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 420bf9bb09e5..78141993dfd0 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3284,10 +3284,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 		dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
 				port1, status);
 	} else {
-		/* drive resume for at least 20 msec */
+		/* drive resume for USB_RESUME_TIMEOUT msec */
 		dev_dbg(&udev->dev, "usb %sresume\n",
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
-		msleep(25);
+		msleep(USB_RESUME_TIMEOUT);
 
 		/* Virtual root hubs can trigger on GET_PORT_STATUS to
 		 * stop resume signaling.  Then finish the resume
-- 
2.3.5

[patch added to the 3.12 stable tree] ALSA: emu10k1: don't deadlock in proc-functions

[Jiri Slaby]

From: Michael Gernoth <michael@gernoth.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 91bf0c2dcb935a87e5c0795f5047456b965fd143 upstream.

The functions snd_emu10k1_proc_spdif_read and snd_emu1010_fpga_read
acquire the emu_lock before accessing the FPGA. The function used
to access the FPGA (snd_emu1010_fpga_read) also tries to take
the emu_lock which causes a deadlock.
Remove the outer locking in the proc-functions (guarding only the
already safe fpga read) to prevent this deadlock.

[removed superfluous flags variables too -- tiwai]

Signed-off-by: Michael Gernoth <michael@gernoth.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/pci/emu10k1/emuproc.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/sound/pci/emu10k1/emuproc.c b/sound/pci/emu10k1/emuproc.c
index 2ca9f2e93139..53745f4c2bf5 100644
--- a/sound/pci/emu10k1/emuproc.c
+++ b/sound/pci/emu10k1/emuproc.c
@@ -241,31 +241,22 @@ static void snd_emu10k1_proc_spdif_read(struct snd_info_entry *entry,
 	struct snd_emu10k1 *emu = entry->private_data;
 	u32 value;
 	u32 value2;
-	unsigned long flags;
 	u32 rate;
 
 	if (emu->card_capabilities->emu_model) {
-		spin_lock_irqsave(&emu->emu_lock, flags);
 		snd_emu1010_fpga_read(emu, 0x38, &value);
-		spin_unlock_irqrestore(&emu->emu_lock, flags);
 		if ((value & 0x1) == 0) {
-			spin_lock_irqsave(&emu->emu_lock, flags);
 			snd_emu1010_fpga_read(emu, 0x2a, &value);
 			snd_emu1010_fpga_read(emu, 0x2b, &value2);
-			spin_unlock_irqrestore(&emu->emu_lock, flags);
 			rate = 0x1770000 / (((value << 5) | value2)+1);	
 			snd_iprintf(buffer, "ADAT Locked : %u\n", rate);
 		} else {
 			snd_iprintf(buffer, "ADAT Unlocked\n");
 		}
-		spin_lock_irqsave(&emu->emu_lock, flags);
 		snd_emu1010_fpga_read(emu, 0x20, &value);
-		spin_unlock_irqrestore(&emu->emu_lock, flags);
 		if ((value & 0x4) == 0) {
-			spin_lock_irqsave(&emu->emu_lock, flags);
 			snd_emu1010_fpga_read(emu, 0x28, &value);
 			snd_emu1010_fpga_read(emu, 0x29, &value2);
-			spin_unlock_irqrestore(&emu->emu_lock, flags);
 			rate = 0x1770000 / (((value << 5) | value2)+1);	
 			snd_iprintf(buffer, "SPDIF Locked : %d\n", rate);
 		} else {
@@ -410,14 +401,11 @@ static void snd_emu_proc_emu1010_reg_read(struct snd_info_entry *entry,
 {
 	struct snd_emu10k1 *emu = entry->private_data;
 	u32 value;
-	unsigned long flags;
 	int i;
 	snd_iprintf(buffer, "EMU1010 Registers:\n\n");
 
 	for(i = 0; i < 0x40; i+=1) {
-		spin_lock_irqsave(&emu->emu_lock, flags);
 		snd_emu1010_fpga_read(emu, i, &value);
-		spin_unlock_irqrestore(&emu->emu_lock, flags);
 		snd_iprintf(buffer, "%02X: %08X, %02X\n", i, value, (value >> 8) & 0x7f);
 	}
 }
-- 
2.3.5

[patch added to the 3.12 stable tree] Input: elantech - fix absolute mode setting on some ASUS laptops

[Jiri Slaby]

From: Ulrik De Bie <ulrik.debie-os@e2big.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++
 drivers/input/mouse/elantech.h |  1 +
 2 files changed, 23 insertions(+)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 0ec8604aadcf..04a7d9f00928 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -814,6 +814,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 }
 
 /*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+		unsigned int rate)
+{
+	struct elantech_data *etd = psmouse->private;
+
+	etd->original_set_rate(psmouse, rate);
+	if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+		psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
+/*
  * Put the touchpad into absolute mode
  */
 static int elantech_set_absolute_mode(struct psmouse *psmouse)
@@ -1015,6 +1030,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
  * Asus K53SV              0x450f01        78, 15, 0c      2 hw buttons
  * Asus G46VW              0x460f02        00, 18, 0c      2 hw buttons
  * Asus G750JX             0x360f00        00, 16, 0c      2 hw buttons
+ * Asus TP500LN            0x381f17        10, 14, 0e      clickpad
+ * Asus X750JN             0x381f17        10, 14, 0e      clickpad
  * Asus UX31               0x361f00        20, 15, 0e      clickpad
  * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
  * Avatar AVIU-145A2       0x361f00        ?               clickpad
@@ -1523,6 +1540,11 @@ int elantech_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
+	if (etd->fw_version == 0x381f17) {
+		etd->original_set_rate = psmouse->set_rate;
+		psmouse->set_rate = elantech_set_rate_restore_reg_07;
+	}
+
 	if (elantech_set_input_params(psmouse)) {
 		psmouse_err(psmouse, "failed to query touchpad range.\n");
 		goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 9e0e2a1f340d..59263a3a8667 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -139,6 +139,7 @@ struct elantech_data {
 	struct finger_pos mt[ETP_MAX_FINGERS];
 	unsigned char parity[256];
 	int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+	void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
 };
 
 #ifdef CONFIG_MOUSE_PS2_ELANTECH
-- 
2.3.5

[patch added to the 3.12 stable tree] fs/binfmt_elf.c: fix bug in loading of PIE binaries

[Jiri Slaby]

From: Michael Davidson <md@google.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 upstream.

With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down
address allocation strategy, load_elf_binary() will attempt to map a PIE
binary into an address range immediately below mm->mmap_base.

Unfortunately, load_elf_ binary() does not take account of the need to
allocate sufficient space for the entire binary which means that, while
the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent
PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are
that is supposed to be the "gap" between the stack and the binary.

Since the size of the "gap" on x86_64 is only guaranteed to be 128MB this
means that binaries with large data segments > 128MB can end up mapping
part of their data segment over their stack resulting in corruption of the
stack (and the data segment once the binary starts to run).

Any PIE binary with a data segment > 128MB is vulnerable to this although
address randomization means that the actual gap between the stack and the
end of the binary is normally greater than 128MB.  The larger the data
segment of the binary the higher the probability of failure.

Fix this by calculating the total size of the binary in the same way as
load_elf_interp().

Signed-off-by: Michael Davidson <md@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/binfmt_elf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index c757a131bb4a..ec6d0de19694 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -754,6 +754,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	    i < loc->elf_ex.e_phnum; i++, elf_ppnt++) {
 		int elf_prot = 0, elf_flags;
 		unsigned long k, vaddr;
+		unsigned long total_size = 0;
 
 		if (elf_ppnt->p_type != PT_LOAD)
 			continue;
@@ -818,10 +819,16 @@ static int load_elf_binary(struct linux_binprm *bprm)
 #else
 			load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
 #endif
+			total_size = total_mapping_size(elf_phdata,
+							loc->elf_ex.e_phnum);
+			if (!total_size) {
+				error = -EINVAL;
+				goto out_free_dentry;
+			}
 		}
 
 		error = elf_map(bprm->file, load_bias + vaddr, elf_ppnt,
-				elf_prot, elf_flags, 0);
+				elf_prot, elf_flags, total_size);
 		if (BAD_ADDR(error)) {
 			send_sig(SIGKILL, current, 0);
 			retval = IS_ERR((void *)error) ?
-- 
2.3.5

[patch added to the 3.12 stable tree] ptrace: fix race between ptrace_resume() and wait_task_stopped()

[Jiri Slaby]

From: Oleg Nesterov <oleg@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit b72c186999e689cb0b055ab1c7b3cd8fffbeb5ed upstream.

ptrace_resume() is called when the tracee is still __TASK_TRACED.  We set
tracee->exit_code and then wake_up_state() changes tracee->state.  If the
tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T)
wrongly looks like another report from tracee.

This confuses debugger, and since wait_task_stopped() clears ->exit_code
the tracee can miss a signal.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <sys/wait.h>
	#include <sys/ptrace.h>
	#include <pthread.h>
	#include <assert.h>

	int pid;

	void *waiter(void *arg)
	{
		int stat;

		for (;;) {
			assert(pid == wait(&stat));
			assert(WIFSTOPPED(stat));
			if (WSTOPSIG(stat) == SIGHUP)
				continue;

			assert(WSTOPSIG(stat) == SIGCONT);
			printf("ERR! extra/wrong report:%x\n", stat);
		}
	}

	int main(void)
	{
		pthread_t thread;

		pid = fork();
		if (!pid) {
			assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
			for (;;)
				kill(getpid(), SIGHUP);
		}

		assert(pthread_create(&thread, NULL, waiter, NULL) == 0);

		for (;;)
			ptrace(PTRACE_CONT, pid, 0, SIGCONT);

		return 0;
	}

Note for stable: the bug is very old, but without 9899d11f6544 "ptrace:
ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix
should use lock_task_sighand(child).

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Pavel Labath <labath@google.com>
Tested-by: Pavel Labath <labath@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 kernel/ptrace.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 1f4bcb3cc21c..be9760f8284a 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -720,6 +720,8 @@ static int ptrace_peek_siginfo(struct task_struct *child,
 static int ptrace_resume(struct task_struct *child, long request,
 			 unsigned long data)
 {
+	bool need_siglock;
+
 	if (!valid_signal(data))
 		return -EIO;
 
@@ -747,8 +749,26 @@ static int ptrace_resume(struct task_struct *child, long request,
 		user_disable_single_step(child);
 	}
 
+	/*
+	 * Change ->exit_code and ->state under siglock to avoid the race
+	 * with wait_task_stopped() in between; a non-zero ->exit_code will
+	 * wrongly look like another report from tracee.
+	 *
+	 * Note that we need siglock even if ->exit_code == data and/or this
+	 * status was not reported yet, the new status must not be cleared by
+	 * wait_task_stopped() after resume.
+	 *
+	 * If data == 0 we do not care if wait_task_stopped() reports the old
+	 * status and clears the code too; this can't race with the tracee, it
+	 * takes siglock after resume.
+	 */
+	need_siglock = data && !thread_group_empty(current);
+	if (need_siglock)
+		spin_lock_irq(&child->sighand->siglock);
 	child->exit_code = data;
 	wake_up_state(child, __TASK_TRACED);
+	if (need_siglock)
+		spin_unlock_irq(&child->sighand->siglock);
 
 	return 0;
 }
-- 
2.3.5

[patch added to the 3.12 stable tree] rtlwifi: rtl8192cu: Add new USB ID

[Jiri Slaby]

From: Larry Finger <Larry.Finger@lwfinger.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 2f92b314f4daff2117847ac5343c54d3d041bf78 upstream.

USB ID 2001:330d is used for a D-Link DWA-131.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index e7a2af3ad05a..8cf0d3919b98 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -369,6 +369,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
 	{RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
 	{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
+	{RTL_USB_DEVICE(0x2001, 0x330d, rtl92cu_hal_cfg)}, /*D-Link DWA-131 */
 	{RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
 	{RTL_USB_DEVICE(0x20f4, 0x624d, rtl92cu_hal_cfg)}, /*TRENDNet*/
 	{RTL_USB_DEVICE(0x2357, 0x0100, rtl92cu_hal_cfg)}, /*TP-Link WN8200ND*/
-- 
2.3.5

[patch added to the 3.12 stable tree] rtlwifi: rtl8192cu: Add new device ID

[Jiri Slaby]

From: Marek Vasut <marex@denx.de>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9374e7d2fdcad3c36dafc8d3effd554bc702c4b6 upstream.

Add new ID for ASUS N10 WiFi dongle.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: John W. Linville <linville@tuxdriver.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 8cf0d3919b98..7555095e0b74 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -313,6 +313,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+	{RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
 	{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
 	{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
-- 
2.3.5

[patch added to the 3.12 stable tree] arm64: vdso: fix build error when switching from LE to BE

[Jiri Slaby]

From: Arun Chandran <achandran@mvista.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 1915e2ad1cf548217c963121e4076b3d44dd0169 upstream.

Building a kernel with CPU_BIG_ENDIAN fails if there are stale objects
from a !CPU_BIG_ENDIAN build. Due to a missing FORCE prerequisite on an
if_changed rule in the VDSO Makefile, we attempt to link a stale LE
object into the new BE kernel.

According to Documentation/kbuild/makefiles.txt, FORCE is required for
if_changed rules and forgetting it is a common mistake, so fix it by
'Forcing' the build of vdso. This patch fixes build errors like these:

arch/arm64/kernel/vdso/note.o: compiled for a little endian system and target is big endian
failed to merge target specific data of file arch/arm64/kernel/vdso/note.o

arch/arm64/kernel/vdso/sigreturn.o: compiled for a little endian system and target is big endian
failed to merge target specific data of file arch/arm64/kernel/vdso/sigreturn.o

Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arun Chandran <achandran@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/arm64/kernel/vdso/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 6d20b7d162d8..a268a9af0c2d 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -43,7 +43,7 @@ $(obj)/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
 	$(call if_changed,vdsosym)
 
 # Assembly rules for the .S files
-$(obj-vdso): %.o: %.S
+$(obj-vdso): %.o: %.S FORCE
 	$(call if_changed_dep,vdsoas)
 
 # Actual build commands
-- 
2.3.5

[patch added to the 3.12 stable tree] ext4: make fsync to sync parent dir in no-journal for real this time

[Jiri Slaby]

From: Lukas Czerner <lczerner@redhat.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit e12fb97222fc41e8442896934f76d39ef99b590a upstream.

Previously commit 14ece1028b3ed53ffec1b1213ffc6acaf79ad77c added a
support for for syncing parent directory of newly created inodes to
make sure that the inode is not lost after a power failure in
no-journal mode.

However this does not work in majority of cases, namely:
 - if the directory has inline data
 - if the directory is already indexed
 - if the directory already has at least one block and:
	- the new entry fits into it
	- or we've successfully converted it to indexed

So in those cases we might lose the inode entirely even after fsync in
the no-journal mode. This also includes ext2 default mode obviously.

I've noticed this while running xfstest generic/321 and even though the
test should fail (we need to run fsck after a crash in no-journal mode)
I could not find a newly created entries even when if it was fsynced
before.

Fix this by adjusting the ext4_add_entry() successful exit paths to set
the inode EXT4_STATE_NEWENTRY so that fsync has the chance to fsync the
parent directory as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/ext4/namei.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 7e6954cbcef7..4587a1b31c93 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1870,7 +1870,7 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry,
 			  struct inode *inode)
 {
 	struct inode *dir = dentry->d_parent->d_inode;
-	struct buffer_head *bh;
+	struct buffer_head *bh = NULL;
 	struct ext4_dir_entry_2 *de;
 	struct ext4_dir_entry_tail *t;
 	struct super_block *sb;
@@ -1894,14 +1894,14 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry,
 			return retval;
 		if (retval == 1) {
 			retval = 0;
-			return retval;
+			goto out;
 		}
 	}
 
 	if (is_dx(dir)) {
 		retval = ext4_dx_add_entry(handle, dentry, inode);
 		if (!retval || (retval != ERR_BAD_DX_DIR))
-			return retval;
+			goto out;
 		ext4_clear_inode_flag(dir, EXT4_INODE_INDEX);
 		dx_fallback++;
 		ext4_mark_inode_dirty(handle, dir);
@@ -1913,14 +1913,15 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry,
 			return PTR_ERR(bh);
 
 		retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh);
-		if (retval != -ENOSPC) {
-			brelse(bh);
-			return retval;
-		}
+		if (retval != -ENOSPC)
+			goto out;
 
 		if (blocks == 1 && !dx_fallback &&
-		    EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX))
-			return make_indexed_dir(handle, dentry, inode, bh);
+		    EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) {
+			retval = make_indexed_dir(handle, dentry, inode, bh);
+			bh = NULL; /* make_indexed_dir releases bh */
+			goto out;
+		}
 		brelse(bh);
 	}
 	bh = ext4_append(handle, dir, &block);
@@ -1936,6 +1937,7 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry,
 	}
 
 	retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
+out:
 	brelse(bh);
 	if (retval == 0)
 		ext4_set_inode_state(inode, EXT4_STATE_NEWENTRY);
-- 
2.3.5

[patch added to the 3.12 stable tree] powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH

[Jiri Slaby]

From: Anton Blanchard <anton@samba.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9a5cbce421a283e6aea3c4007f141735bf9da8c3 upstream.

We cap 32bit userspace backtraces to PERF_MAX_STACK_DEPTH
(currently 127), but we forgot to do the same for 64bit backtraces.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/powerpc/perf/callchain.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index 2396dda282cd..ead55351b254 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -243,7 +243,7 @@ static void perf_callchain_user_64(struct perf_callchain_entry *entry,
 	sp = regs->gpr[1];
 	perf_callchain_store(entry, next_ip);
 
-	for (;;) {
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
 		fp = (unsigned long __user *) sp;
 		if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
 			return;
-- 
2.3.5

[patch added to the 3.12 stable tree] tools lib traceevent kbuffer: Remove extra update to data pointer in PADDING

[Jiri Slaby]

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit c5e691928bf166ac03430e957038b60adba3cf6c upstream.

When a event PADDING is hit (a deleted event that is still in the ring
buffer), translate_data() sets the length of the padding and also updates
the data pointer which is passed back to the caller.

This is unneeded because the caller also updates the data pointer with
the passed back length. translate_data() should not update the pointer,
only set the length.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.461431960@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 tools/lib/traceevent/kbuffer-parse.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/lib/traceevent/kbuffer-parse.c b/tools/lib/traceevent/kbuffer-parse.c
index dcc665228c71..deb3569ab004 100644
--- a/tools/lib/traceevent/kbuffer-parse.c
+++ b/tools/lib/traceevent/kbuffer-parse.c
@@ -372,7 +372,6 @@ translate_data(struct kbuffer *kbuf, void *data, void **rptr,
 	switch (type_len) {
 	case KBUFFER_TYPE_PADDING:
 		*length = read_4(kbuf, data);
-		data += *length;
 		break;
 
 	case KBUFFER_TYPE_TIME_EXTEND:
-- 
2.3.5

[patch added to the 3.12 stable tree] tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile

[Jiri Slaby]

From: Thomas D <whissi@whissi.de>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f82263c6989c31ae9b94cecddffb29dcbec38710 upstream.

Since commit ee0778a30153
("tools/power: turbostat: make Makefile a bit more capable")
turbostat's Makefile is using

  [...]
  BUILD_OUTPUT    := $(PWD)
  [...]

which obviously causes trouble when building "turbostat" with

  make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat

because GNU make does not update nor guarantee that $PWD is set.

This patch changes the Makefile to use $CURDIR instead, which GNU make
guarantees to set and update (i.e. when using "make -C ...") and also
adds support for the O= option (see "make help" in your root of your
kernel source tree for more details).

Link: https://bugs.gentoo.org/show_bug.cgi?id=533918
Fixes: ee0778a30153 ("tools/power: turbostat: make Makefile a bit more capable")
Signed-off-by: Thomas D. <whissi@whissi.de>
Cc: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 tools/power/x86/turbostat/Makefile | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
index d1b3a361e526..4039854560d0 100644
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -1,8 +1,12 @@
 CC		= $(CROSS_COMPILE)gcc
-BUILD_OUTPUT	:= $(PWD)
+BUILD_OUTPUT	:= $(CURDIR)
 PREFIX		:= /usr
 DESTDIR		:=
 
+ifeq ("$(origin O)", "command line")
+	BUILD_OUTPUT := $(O)
+endif
+
 turbostat : turbostat.c
 CFLAGS +=	-Wall
 CFLAGS +=	-DMSRHEADER='"../../../../arch/x86/include/uapi/asm/msr-index.h"'
-- 
2.3.5

[patch added to the 3.12 stable tree] UBI: account for bitflips in both the VID header and data

[Jiri Slaby]

From: Brian Norris <computersforpeace@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8eef7d70f7c6772c3490f410ee2bceab3b543fa1 upstream.

We are completely discarding the earlier value of 'bitflips', which
could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the
bitwise OR of header and data 'bitflip' statuses instead.

Coverity CID #1226856

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/mtd/ubi/attach.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index c071d410488f..79d69bd26dd2 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -408,7 +408,7 @@ int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
 		second_is_newer = !second_is_newer;
 	} else {
 		dbg_bld("PEB %d CRC is OK", pnum);
-		bitflips = !!err;
+		bitflips |= !!err;
 	}
 	mutex_unlock(&ubi->buf_mutex);
 
-- 
2.3.5

[patch added to the 3.12 stable tree] UBI: fix out of bounds write

[Jiri Slaby]

From: Brian Norris <computersforpeace@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit d74adbdb9abf0d2506a6c4afa534d894f28b763f upstream.

If aeb->len >= vol->reserved_pebs, we should not be writing aeb into the
PEB->LEB mapping.

Caught by Coverity, CID #711212.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/mtd/ubi/eba.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 0e11671dadc4..930cf2c77abb 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1362,7 +1362,8 @@ int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 				 * during re-size.
 				 */
 				ubi_move_aeb_to_list(av, aeb, &ai->erase);
-			vol->eba_tbl[aeb->lnum] = aeb->pnum;
+			else
+				vol->eba_tbl[aeb->lnum] = aeb->pnum;
 		}
 	}
 
-- 
2.3.5

[patch added to the 3.12 stable tree] UBI: initialize LEB number variable

[Jiri Slaby]

From: Brian Norris <computersforpeace@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f16db8071ce18819fbd705ddcc91c6f392fb61f8 upstream.

In some of the 'out_not_moved' error paths, lnum may be used
uninitialized. Don't ignore the warning; let's fix it.

This uninitialized variable doesn't have much visible effect in the end,
since we just schedule the PEB for erasure, and its LEB number doesn't
really matter (it just gets printed in debug messages). But let's get it
straight anyway.

Coverity CID #113449

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/mtd/ubi/wl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 49e570abe58b..c08254016fe8 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -999,7 +999,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 				int cancel)
 {
 	int err, scrubbing = 0, torture = 0, protect = 0, erroneous = 0;
-	int vol_id = -1, uninitialized_var(lnum);
+	int vol_id = -1, lnum = -1;
 #ifdef CONFIG_MTD_UBI_FASTMAP
 	int anchor = wrk->anchor;
 #endif
-- 
2.3.5

[patch added to the 3.12 stable tree] UBI: fix check for "too many bytes"

[Jiri Slaby]

From: Brian Norris <computersforpeace@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 299d0c5b27346a77a0777c993372bf8777d4f2e5 upstream.

The comparison from the previous line seems to have been erroneously
(partially) copied-and-pasted onto the next. The second line should be
checking req.bytes, not req.lnum.

Coverity CID #139400

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[rw: Fixed comparison]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/mtd/ubi/cdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 8ca49f2043e4..4cbbd5531133 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -451,7 +451,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		/* Validate the request */
 		err = -EINVAL;
 		if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
-		    req.bytes < 0 || req.lnum >= vol->usable_leb_size)
+		    req.bytes < 0 || req.bytes > vol->usable_leb_size)
 			break;
 
 		err = get_exclusive(desc);
-- 
2.3.5

[patch added to the 3.12 stable tree] scsi: storvsc: Fix a bug in copy_from_bounce_buffer()

[Jiri Slaby]

From: "K. Y. Srinivasan" <kys@microsoft.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8de580742fee8bc34d116f57a20b22b9a5f08403 upstream.

We may exit this function without properly freeing up the maapings
we may have acquired. Fix the bug.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/scsi/storvsc_drv.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 86b05151fdab..97892f258043 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -739,21 +739,22 @@ static unsigned int copy_to_bounce_buffer(struct scatterlist *orig_sgl,
 			if (bounce_sgl[j].length == PAGE_SIZE) {
 				/* full..move to next entry */
 				sg_kunmap_atomic(bounce_addr);
+				bounce_addr = 0;
 				j++;
+			}
 
-				/* if we need to use another bounce buffer */
-				if (srclen || i != orig_sgl_count - 1)
-					bounce_addr = sg_kmap_atomic(bounce_sgl,j);
+			/* if we need to use another bounce buffer */
+			if (srclen && bounce_addr == 0)
+				bounce_addr = sg_kmap_atomic(bounce_sgl, j);
 
-			} else if (srclen == 0 && i == orig_sgl_count - 1) {
-				/* unmap the last bounce that is < PAGE_SIZE */
-				sg_kunmap_atomic(bounce_addr);
-			}
 		}
 
 		sg_kunmap_atomic(src_addr - orig_sgl[i].offset);
 	}
 
+	if (bounce_addr)
+		sg_kunmap_atomic(bounce_addr);
+
 	local_irq_restore(flags);
 
 	return total_copied;
-- 
2.3.5

[patch added to the 3.12 stable tree] target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling

[Jiri Slaby]

From: Nicholas Bellinger <nab@linux-iscsi.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit c8e639852ad720499912acedfd6b072325fd2807 upstream.

This patch fixes a bug for COMPARE_AND_WRITE handling with
fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC.

It adds the missing allocation for cmd->t_bidi_data_sg within
transport_generic_new_cmd() that is used by COMPARE_AND_WRITE
for the initial READ payload, even if the fabric is already
providing a pre-allocated buffer for cmd->t_data_sg.

Also, fix zero-length COMPARE_AND_WRITE handling within the
compare_and_write_callback() and target_complete_ok_work()
to queue the response, skipping the initial READ.

This fixes COMPARE_AND_WRITE emulation with loopback, vhost,
and xen-backend fabric drivers using SG_TO_MEM_NOALLOC.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/target/target_core_sbc.c       | 15 +++++++++-----
 drivers/target/target_core_transport.c | 37 ++++++++++++++++++++++++++++++----
 include/target/target_core_base.h      |  2 +-
 3 files changed, 44 insertions(+), 10 deletions(-)

diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 63d56cda2b96..75f126538a72 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -298,7 +298,7 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o
 	return 0;
 }
 
-static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd)
+static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd, bool success)
 {
 	unsigned char *buf, *addr;
 	struct scatterlist *sg;
@@ -362,7 +362,7 @@ sbc_execute_rw(struct se_cmd *cmd)
 			       cmd->data_direction);
 }
 
-static sense_reason_t compare_and_write_post(struct se_cmd *cmd)
+static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success)
 {
 	struct se_device *dev = cmd->se_dev;
 
@@ -385,7 +385,7 @@ static sense_reason_t compare_and_write_post(struct se_cmd *cmd)
 	return TCM_NO_SENSE;
 }
 
-static sense_reason_t compare_and_write_callback(struct se_cmd *cmd)
+static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success)
 {
 	struct se_device *dev = cmd->se_dev;
 	struct scatterlist *write_sg = NULL, *sg;
@@ -400,11 +400,16 @@ static sense_reason_t compare_and_write_callback(struct se_cmd *cmd)
 
 	/*
 	 * Handle early failure in transport_generic_request_failure(),
-	 * which will not have taken ->caw_mutex yet..
+	 * which will not have taken ->caw_sem yet..
 	 */
-	if (!cmd->t_data_sg || !cmd->t_bidi_data_sg)
+	if (!success && (!cmd->t_data_sg || !cmd->t_bidi_data_sg))
 		return TCM_NO_SENSE;
 	/*
+	 * Handle special case for zero-length COMPARE_AND_WRITE
+	 */
+	if (!cmd->data_length)
+		goto out;
+	/*
 	 * Immediately exit + release dev->caw_sem if command has already
 	 * been failed with a non-zero SCSI status.
 	 */
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 65ecaa1c59a7..b52bf3cad494 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1589,11 +1589,11 @@ void transport_generic_request_failure(struct se_cmd *cmd,
 	transport_complete_task_attr(cmd);
 	/*
 	 * Handle special case for COMPARE_AND_WRITE failure, where the
-	 * callback is expected to drop the per device ->caw_mutex.
+	 * callback is expected to drop the per device ->caw_sem.
 	 */
 	if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
 	     cmd->transport_complete_callback)
-		cmd->transport_complete_callback(cmd);
+		cmd->transport_complete_callback(cmd, false);
 
 	switch (sense_reason) {
 	case TCM_NON_EXISTENT_LUN:
@@ -1942,8 +1942,12 @@ static void target_complete_ok_work(struct work_struct *work)
 	if (cmd->transport_complete_callback) {
 		sense_reason_t rc;
 
-		rc = cmd->transport_complete_callback(cmd);
+		rc = cmd->transport_complete_callback(cmd, true);
 		if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST)) {
+			if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
+			    !cmd->data_length)
+				goto queue_rsp;
+
 			return;
 		} else if (rc) {
 			ret = transport_send_check_condition_and_sense(cmd,
@@ -1957,6 +1961,7 @@ static void target_complete_ok_work(struct work_struct *work)
 		}
 	}
 
+queue_rsp:
 	switch (cmd->data_direction) {
 	case DMA_FROM_DEVICE:
 		spin_lock(&cmd->se_lun->lun_sep_lock);
@@ -2045,6 +2050,16 @@ static inline void transport_reset_sgl_orig(struct se_cmd *cmd)
 static inline void transport_free_pages(struct se_cmd *cmd)
 {
 	if (cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC) {
+		/*
+		 * Release special case READ buffer payload required for
+		 * SG_TO_MEM_NOALLOC to function with COMPARE_AND_WRITE
+		 */
+		if (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) {
+			transport_free_sgl(cmd->t_bidi_data_sg,
+					   cmd->t_bidi_data_nents);
+			cmd->t_bidi_data_sg = NULL;
+			cmd->t_bidi_data_nents = 0;
+		}
 		transport_reset_sgl_orig(cmd);
 		return;
 	}
@@ -2193,6 +2208,7 @@ sense_reason_t
 transport_generic_new_cmd(struct se_cmd *cmd)
 {
 	int ret = 0;
+	bool zero_flag = !(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB);
 
 	/*
 	 * Determine is the TCM fabric module has already allocated physical
@@ -2201,7 +2217,6 @@ transport_generic_new_cmd(struct se_cmd *cmd)
 	 */
 	if (!(cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC) &&
 	    cmd->data_length) {
-		bool zero_flag = !(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB);
 
 		if ((cmd->se_cmd_flags & SCF_BIDI) ||
 		    (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE)) {
@@ -2224,6 +2239,20 @@ transport_generic_new_cmd(struct se_cmd *cmd)
 				       cmd->data_length, zero_flag);
 		if (ret < 0)
 			return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+	} else if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
+		    cmd->data_length) {
+		/*
+		 * Special case for COMPARE_AND_WRITE with fabrics
+		 * using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC.
+		 */
+		u32 caw_length = cmd->t_task_nolb *
+				 cmd->se_dev->dev_attrib.block_size;
+
+		ret = target_alloc_sgl(&cmd->t_bidi_data_sg,
+				       &cmd->t_bidi_data_nents,
+				       caw_length, zero_flag);
+		if (ret < 0)
+			return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 	}
 	/*
 	 * If this command is not a write we can execute it right here,
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 38647a3441c9..085e6bedf393 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -457,7 +457,7 @@ struct se_cmd {
 	sense_reason_t		(*execute_cmd)(struct se_cmd *);
 	sense_reason_t		(*execute_rw)(struct se_cmd *, struct scatterlist *,
 					      u32, enum dma_data_direction);
-	sense_reason_t (*transport_complete_callback)(struct se_cmd *);
+	sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool);
 
 	unsigned char		*t_task_cdb;
 	unsigned char		__t_task_cdb[TCM_MAX_COMMAND_SIZE];
-- 
2.3.5

[patch added to the 3.12 stable tree] Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe card

[Jiri Slaby]

From: Alexander Ploumistos <alex.ploumistos@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 2eeff0b4317a02f0e281df891d990194f0737aae upstream.

Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so
that the device can load the ath3k firmware and re-enumerate itself as an
AR3011 device.

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04f2 ProdID=aff1 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/bluetooth/ath3k.c | 1 +
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index e0894227c302..0e3978496339 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -65,6 +65,7 @@ static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xE027) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x04F2, 0xAFF1) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0CF3, 0x3002) },
 	{ USB_DEVICE(0x0CF3, 0xE019) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 042f6dccc399..070913737f44 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -142,6 +142,7 @@ static struct usb_device_id blacklist_table[] = {
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
-- 
2.3.5

[patch added to the 3.12 stable tree] powerpc: Fix missing L2 cache size in /sys/devices/system/cpu

[Jiri Slaby]

From: Dave Olson <olson@cumulusnetworks.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f7e9e358362557c3aa2c1ec47490f29fe880a09e upstream.

This problem appears to have been introduced in 2.6.29 by commit
93197a36a9c1 "Rewrite sysfs processor cache info code".

This caused lscpu to error out on at least e500v2 devices, eg:

  error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory

Some embedded powerpc systems use cache-size in DTS for the unified L2
cache size, not d-cache-size, so we need to allow for both DTS names.
Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle
this.

Fixes: 93197a36a9c1 ("powerpc: Rewrite sysfs processor cache info code")
Signed-off-by: Dave Olson <olson@cumulusnetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/powerpc/kernel/cacheinfo.c | 44 +++++++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index bfb82365bc7a..c26b9355156a 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -62,12 +62,22 @@ struct cache_type_info {
 };
 
 /* These are used to index the cache_type_info array. */
-#define CACHE_TYPE_UNIFIED     0
-#define CACHE_TYPE_INSTRUCTION 1
-#define CACHE_TYPE_DATA        2
+#define CACHE_TYPE_UNIFIED     0 /* cache-size, cache-block-size, etc. */
+#define CACHE_TYPE_UNIFIED_D   1 /* d-cache-size, d-cache-block-size, etc */
+#define CACHE_TYPE_INSTRUCTION 2
+#define CACHE_TYPE_DATA        3
 
 static const struct cache_type_info cache_type_info[] = {
 	{
+		/* Embedded systems that use cache-size, cache-block-size,
+		 * etc. for the Unified (typically L2) cache. */
+		.name            = "Unified",
+		.size_prop       = "cache-size",
+		.line_size_props = { "cache-line-size",
+				     "cache-block-size", },
+		.nr_sets_prop    = "cache-sets",
+	},
+	{
 		/* PowerPC Processor binding says the [di]-cache-*
 		 * must be equal on unified caches, so just use
 		 * d-cache properties. */
@@ -294,7 +304,8 @@ static struct cache *cache_find_first_sibling(struct cache *cache)
 {
 	struct cache *iter;
 
-	if (cache->type == CACHE_TYPE_UNIFIED)
+	if (cache->type == CACHE_TYPE_UNIFIED ||
+	    cache->type == CACHE_TYPE_UNIFIED_D)
 		return cache;
 
 	list_for_each_entry(iter, &cache_list, list)
@@ -325,16 +336,29 @@ static bool cache_node_is_unified(const struct device_node *np)
 	return of_get_property(np, "cache-unified", NULL);
 }
 
-static struct cache *cache_do_one_devnode_unified(struct device_node *node,
-						  int level)
+/*
+ * Unified caches can have two different sets of tags.  Most embedded
+ * use cache-size, etc. for the unified cache size, but open firmware systems
+ * use d-cache-size, etc.   Check on initialization for which type we have, and
+ * return the appropriate structure type.  Assume it's embedded if it isn't
+ * open firmware.  If it's yet a 3rd type, then there will be missing entries
+ * in /sys/devices/system/cpu/cpu0/cache/index2/, and this code will need
+ * to be extended further.
+ */
+static int cache_is_unified_d(const struct device_node *np)
 {
-	struct cache *cache;
+	return of_get_property(np,
+		cache_type_info[CACHE_TYPE_UNIFIED_D].size_prop, NULL) ?
+		CACHE_TYPE_UNIFIED_D : CACHE_TYPE_UNIFIED;
+}
 
+/*
+ */
+static struct cache *cache_do_one_devnode_unified(struct device_node *node, int level)
+{
 	pr_debug("creating L%d ucache for %s\n", level, node->full_name);
 
-	cache = new_cache(CACHE_TYPE_UNIFIED, level, node);
-
-	return cache;
+	return new_cache(cache_is_unified_d(node), level, node);
 }
 
 static struct cache *cache_do_one_devnode_split(struct device_node *node,
-- 
2.3.5

[patch added to the 3.12 stable tree] ACPICA: Utilities: split IO address types from data type models.

[Jiri Slaby]

From: Lv Zheng <lv.zheng@intel.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 2b8760100e1de69b6ff004c986328a82947db4ad upstream.

ACPICA commit aacf863cfffd46338e268b7415f7435cae93b451

It is reported that on a physically 64-bit addressed machine, 32-bit kernel
can trigger crashes in accessing the memory regions that are beyond the
32-bit boundary. The region field's start address should still be 32-bit
compliant, but after a calculation (adding some offsets), it may exceed the
32-bit boundary. This case is rare and buggy, but there are real BIOSes
leaked with such issues (see References below).

This patch fixes this gap by always defining IO addresses as 64-bit, and
allows OSPMs to optimize it for a real 32-bit machine to reduce the size of
the internal objects.

Internal acpi_physical_address usages in the structures that can be fixed
by this change include:
 1. struct acpi_object_region:
    acpi_physical_address		address;
 2. struct acpi_address_range:
    acpi_physical_address		start_address;
    acpi_physical_address		end_address;
 3. struct acpi_mem_space_context;
    acpi_physical_address		address;
 4. struct acpi_table_desc
    acpi_physical_address		address;
See known issues 1 for other usages.

Note that acpi_io_address which is used for ACPI_PROCESSOR may also suffer
from same problem, so this patch changes it accordingly.

For iasl, it will enforce acpi_physical_address as 32-bit to generate
32-bit OSPM compatible tables on 32-bit platforms, we need to define
ACPI_32BIT_PHYSICAL_ADDRESS for it in acenv.h.

Known issues:
 1. Cleanup of mapped virtual address
   In struct acpi_mem_space_context, acpi_physical_address is used as a virtual
   address:
    acpi_physical_address                   mapped_physical_address;
   It is better to introduce acpi_virtual_address or use acpi_size instead.
   This patch doesn't make such a change. Because this should be done along
   with a change to acpi_os_map_memory()/acpi_os_unmap_memory().
   There should be no functional problem to leave this unchanged except
   that only this structure is enlarged unexpectedly.

Link: https://github.com/acpica/acpica/commit/aacf863c
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=87971
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=79501
Reported-and-tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-and-tested-by: Sial Nije <sialnije@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/acpi/actypes.h        | 20 ++++++++++++++++++++
 include/acpi/platform/acenv.h |  1 +
 2 files changed, 21 insertions(+)

diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index b748aefce929..3c36b091a2c4 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -198,9 +198,29 @@ typedef int INT32;
 typedef s32 acpi_native_int;
 
 typedef u32 acpi_size;
+
+#ifdef ACPI_32BIT_PHYSICAL_ADDRESS
+
+/*
+ * OSPMs can define this to shrink the size of the structures for 32-bit
+ * none PAE environment. ASL compiler may always define this to generate
+ * 32-bit OSPM compliant tables.
+ */
 typedef u32 acpi_io_address;
 typedef u32 acpi_physical_address;
 
+#else				/* ACPI_32BIT_PHYSICAL_ADDRESS */
+
+/*
+ * It is reported that, after some calculations, the physical addresses can
+ * wrap over the 32-bit boundary on 32-bit PAE environment.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=87971
+ */
+typedef u64 acpi_io_address;
+typedef u64 acpi_physical_address;
+
+#endif				/* ACPI_32BIT_PHYSICAL_ADDRESS */
+
 #define ACPI_MAX_PTR                    ACPI_UINT32_MAX
 #define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
 
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index ef04b36ca6ed..f7db107abb04 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -76,6 +76,7 @@
 #define ACPI_LARGE_NAMESPACE_NODE
 #define ACPI_DATA_TABLE_DISASSEMBLY
 #define ACPI_SINGLE_THREADED
+#define ACPI_32BIT_PHYSICAL_ADDRESS
 #endif
 
 /* acpi_exec configuration. Multithreaded with full AML debugger */
-- 
2.3.5

[patch added to the 3.12 stable tree] xtensa: xtfpga: fix hardware lockup caused by LCD driver

[Jiri Slaby]

From: Max Filippov <jcmvbkbc@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 4949009eb8d40a441dcddcd96e101e77d31cf1b2 upstream.

LCD driver is always built for the XTFPGA platform, but its base address
is not configurable, and is wrong for ML605/KC705. Its initialization
locks up KC705 board hardware.

Make the whole driver optional, and its base address and bus width
configurable. Implement 4-bit bus access method.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/xtensa/Kconfig                                | 30 ++++++++++++
 arch/xtensa/platforms/xtfpga/Makefile              |  3 +-
 .../platforms/xtfpga/include/platform/hardware.h   |  3 --
 .../xtensa/platforms/xtfpga/include/platform/lcd.h | 15 ++++++
 arch/xtensa/platforms/xtfpga/lcd.c                 | 55 +++++++++++++---------
 5 files changed, 81 insertions(+), 25 deletions(-)

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 8d24dcb7cdac..3b8060e4f1d7 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -289,6 +289,36 @@ menu "Executable file formats"
 
 source "fs/Kconfig.binfmt"
 
+config XTFPGA_LCD
+	bool "Enable XTFPGA LCD driver"
+	depends on XTENSA_PLATFORM_XTFPGA
+	default n
+	help
+	  There's a 2x16 LCD on most of XTFPGA boards, kernel may output
+	  progress messages there during bootup/shutdown. It may be useful
+	  during board bringup.
+
+	  If unsure, say N.
+
+config XTFPGA_LCD_BASE_ADDR
+	hex "XTFPGA LCD base address"
+	depends on XTFPGA_LCD
+	default "0x0d0c0000"
+	help
+	  Base address of the LCD controller inside KIO region.
+	  Different boards from XTFPGA family have LCD controller at different
+	  addresses. Please consult prototyping user guide for your board for
+	  the correct address. Wrong address here may lead to hardware lockup.
+
+config XTFPGA_LCD_8BIT_ACCESS
+	bool "Use 8-bit access to XTFPGA LCD"
+	depends on XTFPGA_LCD
+	default n
+	help
+	  LCD may be connected with 4- or 8-bit interface, 8-bit access may
+	  only be used with 8-bit interface. Please consult prototyping user
+	  guide for your board for the correct interface width.
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/xtensa/platforms/xtfpga/Makefile b/arch/xtensa/platforms/xtfpga/Makefile
index b9ae206340cd..7839d38b2337 100644
--- a/arch/xtensa/platforms/xtfpga/Makefile
+++ b/arch/xtensa/platforms/xtfpga/Makefile
@@ -6,4 +6,5 @@
 #
 # Note 2! The CFLAGS definitions are in the main makefile...
 
-obj-y			= setup.o lcd.o
+obj-y			+= setup.o
+obj-$(CONFIG_XTFPGA_LCD) += lcd.o
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
index 4416773cbde5..b39fbcf5c611 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -44,9 +44,6 @@
 
 /* UART */
 #define DUART16552_PADDR	(XCHAL_KIO_PADDR + 0x0D050020)
-/* LCD instruction and data addresses. */
-#define LCD_INSTR_ADDR		((char *)IOADDR(0x0D040000))
-#define LCD_DATA_ADDR		((char *)IOADDR(0x0D040004))
 
 /* Misc. */
 #define XTFPGA_FPGAREGS_VADDR	IOADDR(0x0D020000)
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
index 0e435645af5a..4c8541ed1139 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
@@ -11,10 +11,25 @@
 #ifndef __XTENSA_XTAVNET_LCD_H
 #define __XTENSA_XTAVNET_LCD_H
 
+#ifdef CONFIG_XTFPGA_LCD
 /* Display string STR at position POS on the LCD. */
 void lcd_disp_at_pos(char *str, unsigned char pos);
 
 /* Shift the contents of the LCD display left or right. */
 void lcd_shiftleft(void);
 void lcd_shiftright(void);
+#else
+static inline void lcd_disp_at_pos(char *str, unsigned char pos)
+{
+}
+
+static inline void lcd_shiftleft(void)
+{
+}
+
+static inline void lcd_shiftright(void)
+{
+}
+#endif
+
 #endif
diff --git a/arch/xtensa/platforms/xtfpga/lcd.c b/arch/xtensa/platforms/xtfpga/lcd.c
index 2872301598df..4dc0c1b43f4b 100644
--- a/arch/xtensa/platforms/xtfpga/lcd.c
+++ b/arch/xtensa/platforms/xtfpga/lcd.c
@@ -1,50 +1,63 @@
 /*
- * Driver for the LCD display on the Tensilica LX60 Board.
+ * Driver for the LCD display on the Tensilica XTFPGA board family.
+ * http://www.mytechcorp.com/cfdata/productFile/File1/MOC-16216B-B-A0A04.pdf
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2001, 2006 Tensilica Inc.
+ * Copyright (C) 2015 Cadence Design Systems Inc.
  */
 
-/*
- *
- * FIXME: this code is from the examples from the LX60 user guide.
- *
- * The lcd_pause function does busy waiting, which is probably not
- * great. Maybe the code could be changed to use kernel timers, or
- * change the hardware to not need to wait.
- */
-
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
 #include <platform/hardware.h>
 #include <platform/lcd.h>
-#include <linux/delay.h>
 
-#define LCD_PAUSE_ITERATIONS	4000
+/* LCD instruction and data addresses. */
+#define LCD_INSTR_ADDR		((char *)IOADDR(CONFIG_XTFPGA_LCD_BASE_ADDR))
+#define LCD_DATA_ADDR		(LCD_INSTR_ADDR + 4)
+
 #define LCD_CLEAR		0x1
 #define LCD_DISPLAY_ON		0xc
 
 /* 8bit and 2 lines display */
 #define LCD_DISPLAY_MODE8BIT	0x38
+#define LCD_DISPLAY_MODE4BIT	0x28
 #define LCD_DISPLAY_POS		0x80
 #define LCD_SHIFT_LEFT		0x18
 #define LCD_SHIFT_RIGHT		0x1c
 
+static void lcd_put_byte(u8 *addr, u8 data)
+{
+#ifdef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+	ACCESS_ONCE(*addr) = data;
+#else
+	ACCESS_ONCE(*addr) = data & 0xf0;
+	ACCESS_ONCE(*addr) = (data << 4) & 0xf0;
+#endif
+}
+
 static int __init lcd_init(void)
 {
-	*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+	ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
 	mdelay(5);
-	*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+	ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
 	udelay(200);
-	*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+	ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
+	udelay(50);
+#ifndef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+	ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE4BIT;
+	udelay(50);
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT);
 	udelay(50);
-	*LCD_INSTR_ADDR = LCD_DISPLAY_ON;
+#endif
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_ON);
 	udelay(50);
-	*LCD_INSTR_ADDR = LCD_CLEAR;
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_CLEAR);
 	mdelay(10);
 	lcd_disp_at_pos("XTENSA LINUX", 0);
 	return 0;
@@ -52,10 +65,10 @@ static int __init lcd_init(void)
 
 void lcd_disp_at_pos(char *str, unsigned char pos)
 {
-	*LCD_INSTR_ADDR = LCD_DISPLAY_POS | pos;
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_POS | pos);
 	udelay(100);
 	while (*str != 0) {
-		*LCD_DATA_ADDR = *str;
+		lcd_put_byte(LCD_DATA_ADDR, *str);
 		udelay(200);
 		str++;
 	}
@@ -63,13 +76,13 @@ void lcd_disp_at_pos(char *str, unsigned char pos)
 
 void lcd_shiftleft(void)
 {
-	*LCD_INSTR_ADDR = LCD_SHIFT_LEFT;
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_LEFT);
 	udelay(50);
 }
 
 void lcd_shiftright(void)
 {
-	*LCD_INSTR_ADDR = LCD_SHIFT_RIGHT;
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_RIGHT);
 	udelay(50);
 }
 
-- 
2.3.5

[patch added to the 3.12 stable tree] xtensa: provide __NR_sync_file_range2 instead of __NR_sync_file_range

[Jiri Slaby]

From: Max Filippov <jcmvbkbc@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 01e84c70fe40c8111f960987bcf7f931842e6d07 upstream.

xtensa actually uses sync_file_range2 implementation, so it should
define __NR_sync_file_range2 as other architectures that use that
function. That fixes userspace interface (that apparently never worked)
and avoids special-casing xtensa in libc implementations.
See the thread ending at
http://lists.busybox.net/pipermail/uclibc/2015-February/048833.html
for more details.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/xtensa/include/uapi/asm/unistd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index 513effd48060..d07c1886bc8f 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -715,7 +715,7 @@ __SYSCALL(323, sys_process_vm_writev, 6)
 __SYSCALL(324, sys_name_to_handle_at, 5)
 #define __NR_open_by_handle_at			325
 __SYSCALL(325, sys_open_by_handle_at, 3)
-#define __NR_sync_file_range			326
+#define __NR_sync_file_range2			326
 __SYSCALL(326, sys_sync_file_range2, 6)
 #define __NR_perf_event_open			327
 __SYSCALL(327, sys_perf_event_open, 5)
-- 
2.3.5

[patch added to the 3.12 stable tree] xtensa: ISS: fix locking in TAP network adapter

[Jiri Slaby]

From: Max Filippov <jcmvbkbc@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 24e94454c8cb6a13634f5a2f5a01da53a546a58d upstream.

- don't lock lp->lock in the iss_net_timer for the call of iss_net_poll,
  it will lock it itself;
- invert order of lp->lock and opened_lock acquisition in the
  iss_net_open to make it consistent with iss_net_poll;
- replace spin_lock with spin_lock_bh when acquiring locks used in
  iss_net_timer from non-atomic context;
- replace spin_lock_irqsave with spin_lock_bh in the iss_net_start_xmit
  as the driver doesn't use lp->lock in the hard IRQ context;
- replace __SPIN_LOCK_UNLOCKED(lp.lock) with spin_lock_init, otherwise
  lockdep is unhappy about using non-static key.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/xtensa/platforms/iss/network.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index e9e1aad8c271..37141c8cd1a4 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -395,10 +395,10 @@ static void iss_net_timer(unsigned long priv)
 {
 	struct iss_net_private* lp = (struct iss_net_private*) priv;
 
-	spin_lock(&lp->lock);
-
 	iss_net_poll();
 
+	spin_lock(&lp->lock);
+
 	mod_timer(&lp->timer, jiffies + lp->timer_val);
 
 	spin_unlock(&lp->lock);
@@ -411,7 +411,7 @@ static int iss_net_open(struct net_device *dev)
 	char addr[sizeof "255.255.255.255\0"];
 	int err;
 
-	spin_lock(&lp->lock);
+	spin_lock_bh(&lp->lock);
 
 	if ((err = lp->tp.open(lp)) < 0)
 		goto out;
@@ -430,9 +430,11 @@ static int iss_net_open(struct net_device *dev)
 	while ((err = iss_net_rx(dev)) > 0)
 		;
 
-	spin_lock(&opened_lock);
+	spin_unlock_bh(&lp->lock);
+	spin_lock_bh(&opened_lock);
 	list_add(&lp->opened_list, &opened);
-	spin_unlock(&opened_lock);
+	spin_unlock_bh(&opened_lock);
+	spin_lock_bh(&lp->lock);
 
 	init_timer(&lp->timer);
 	lp->timer_val = ISS_NET_TIMER_VALUE;
@@ -441,7 +443,7 @@ static int iss_net_open(struct net_device *dev)
 	mod_timer(&lp->timer, jiffies + lp->timer_val);
 
 out:
-	spin_unlock(&lp->lock);
+	spin_unlock_bh(&lp->lock);
 	return err;
 }
 
@@ -450,7 +452,7 @@ static int iss_net_close(struct net_device *dev)
 	struct iss_net_private *lp = netdev_priv(dev);
 printk("iss_net_close!\n");
 	netif_stop_queue(dev);
-	spin_lock(&lp->lock);
+	spin_lock_bh(&lp->lock);
 
 	spin_lock(&opened_lock);
 	list_del(&opened);
@@ -460,18 +462,17 @@ printk("iss_net_close!\n");
 
 	lp->tp.close(lp);
 
-	spin_unlock(&lp->lock);
+	spin_unlock_bh(&lp->lock);
 	return 0;
 }
 
 static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct iss_net_private *lp = netdev_priv(dev);
-	unsigned long flags;
 	int len;
 
 	netif_stop_queue(dev);
-	spin_lock_irqsave(&lp->lock, flags);
+	spin_lock_bh(&lp->lock);
 
 	len = lp->tp.write(lp, &skb);
 
@@ -493,7 +494,7 @@ static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_ERR "iss_net_start_xmit: failed(%d)\n", len);
 	}
 
-	spin_unlock_irqrestore(&lp->lock, flags);
+	spin_unlock_bh(&lp->lock);
 
 	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
@@ -532,9 +533,9 @@ static int iss_net_set_mac(struct net_device *dev, void *addr)
 	struct iss_net_private *lp = netdev_priv(dev);
 	struct sockaddr *hwaddr = addr;
 
-	spin_lock(&lp->lock);
+	spin_lock_bh(&lp->lock);
 	memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN);
-	spin_unlock(&lp->lock);
+	spin_unlock_bh(&lp->lock);
 #endif
 
 	return 0;
@@ -604,14 +605,14 @@ static int iss_net_configure(int index, char *init)
 	*lp = ((struct iss_net_private) {
 		.device_list		= LIST_HEAD_INIT(lp->device_list),
 		.opened_list		= LIST_HEAD_INIT(lp->opened_list),
-		.lock			= __SPIN_LOCK_UNLOCKED(lp.lock),
 		.dev			= dev,
 		.index			= index,
 		//.fd                   = -1,
 		.mac			= { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0 },
 		.have_mac		= 0,
-		});
+	});
 
+	spin_lock_init(&lp->lock);
 	/*
 	 * Try all transport protocols.
 	 * Note: more protocols can be added by adding '&& !X_init(lp, eth)'.
-- 
2.3.5

[patch added to the 3.12 stable tree] gpio: mvebu: Fix mask/unmask managment per irq chip type

[Jiri Slaby]

From: Gregory CLEMENT <gregory.clement@free-electrons.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 61819549f572edd7fce53f228c0d8420cdc85f71 upstream.

Level IRQ handlers and edge IRQ handler are managed by tow different
sets of registers. But currently the driver uses the same mask for the
both registers. It lead to issues with the following scenario:

First, an IRQ is requested on a GPIO to be triggered on front. After,
this an other IRQ is requested for a GPIO of the same bank but
triggered on level. Then the first one will be also setup to be
triggered on level. It leads to an interrupt storm.

The different kind of handler are already associated with two
different irq chip type. With this patch the driver uses a private
mask for each one which solves this issue.

It has been tested on an Armada XP based board and on an Armada 375
board. For the both boards, with this patch is applied, there is no
such interrupt storm when running the previous scenario.

This bug was already fixed but in a different way in the legacy
version of this driver by Evgeniy Dushistov:
9ece8839b1277fb9128ff6833411614ab6c88d68 "ARM: orion: Fix for certain
sequence of request_irq can cause irq storm". The fact the new version
of the gpio drive could be affected had been discussed there:
http://thread.gmane.org/gmane.linux.ports.arm.kernel/344670/focus=364012

Reported-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/gpio/gpio-mvebu.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index db3129043e63..5eaafc868218 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -304,11 +304,13 @@ static void mvebu_gpio_edge_irq_mask(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
 	u32 mask = 1 << (d->irq - gc->irq_base);
 
 	irq_gc_lock(gc);
-	gc->mask_cache &= ~mask;
-	writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+	ct->mask_cache_priv &= ~mask;
+
+	writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_edge_mask(mvchip));
 	irq_gc_unlock(gc);
 }
 
@@ -316,11 +318,13 @@ static void mvebu_gpio_edge_irq_unmask(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
 	u32 mask = 1 << (d->irq - gc->irq_base);
 
 	irq_gc_lock(gc);
-	gc->mask_cache |= mask;
-	writel_relaxed(gc->mask_cache, mvebu_gpioreg_edge_mask(mvchip));
+	ct->mask_cache_priv |= mask;
+	writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_edge_mask(mvchip));
 	irq_gc_unlock(gc);
 }
 
@@ -328,11 +332,13 @@ static void mvebu_gpio_level_irq_mask(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
 	u32 mask = 1 << (d->irq - gc->irq_base);
 
 	irq_gc_lock(gc);
-	gc->mask_cache &= ~mask;
-	writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+	ct->mask_cache_priv &= ~mask;
+	writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_level_mask(mvchip));
 	irq_gc_unlock(gc);
 }
 
@@ -340,11 +346,13 @@ static void mvebu_gpio_level_irq_unmask(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mvebu_gpio_chip *mvchip = gc->private;
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
 	u32 mask = 1 << (d->irq - gc->irq_base);
 
 	irq_gc_lock(gc);
-	gc->mask_cache |= mask;
-	writel_relaxed(gc->mask_cache, mvebu_gpioreg_level_mask(mvchip));
+	ct->mask_cache_priv |= mask;
+	writel_relaxed(ct->mask_cache_priv, mvebu_gpioreg_level_mask(mvchip));
 	irq_gc_unlock(gc);
 }
 
-- 
2.3.5

[patch added to the 3.12 stable tree] dm crypt: fix deadlock when async crypto algorithm returns -EBUSY

[Jiri Slaby]

From: Ben Collins <ben.c@servergy.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 0618764cb25f6fa9fb31152995de42a8a0496475 upstream.

I suspect this doesn't show up for most anyone because software
algorithms typically don't have a sense of being too busy.  However,
when working with the Freescale CAAM driver it will return -EBUSY on
occasion under heavy -- which resulted in dm-crypt deadlock.

After checking the logic in some other drivers, the scheme for
crypt_convert() and it's callback, kcryptd_async_done(), were not
correctly laid out to properly handle -EBUSY or -EINPROGRESS.

Fix this by using the completion for both -EBUSY and -EINPROGRESS.  Now
crypt_convert()'s use of completion is comparable to
af_alg_wait_for_completion().  Similarly, kcryptd_async_done() follows
the pattern used in af_alg_complete().

Before this fix dm-crypt would lockup within 1-2 minutes running with
the CAAM driver.  Fix was regression tested against software algorithms
on PPC32 and x86_64, and things seem perfectly happy there as well.

Signed-off-by: Ben Collins <ben.c@servergy.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/md/dm-crypt.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 0f64dc596bce..33bb9e44bafc 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -751,11 +751,10 @@ static int crypt_convert(struct crypt_config *cc,
 
 		switch (r) {
 		/* async */
+		case -EINPROGRESS:
 		case -EBUSY:
 			wait_for_completion(&ctx->restart);
 			INIT_COMPLETION(ctx->restart);
-			/* fall through*/
-		case -EINPROGRESS:
 			ctx->req = NULL;
 			ctx->cc_sector++;
 			continue;
@@ -1151,10 +1150,8 @@ static void kcryptd_async_done(struct crypto_async_request *async_req,
 	struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
 	struct crypt_config *cc = io->cc;
 
-	if (error == -EINPROGRESS) {
-		complete(&ctx->restart);
+	if (error == -EINPROGRESS)
 		return;
-	}
 
 	if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post)
 		error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq);
@@ -1165,12 +1162,15 @@ static void kcryptd_async_done(struct crypto_async_request *async_req,
 	mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool);
 
 	if (!atomic_dec_and_test(&ctx->cc_pending))
-		return;
+		goto done;
 
 	if (bio_data_dir(io->base_bio) == READ)
 		kcryptd_crypt_read_done(io);
 	else
 		kcryptd_crypt_write_io_submit(io, 1);
+done:
+	if (!completion_done(&ctx->restart))
+		complete(&ctx->restart);
 }
 
 static void kcryptd_crypt(struct work_struct *work)
-- 
2.3.5

[patch added to the 3.12 stable tree] Drivers: hv: vmbus: Fix a bug in the error path in vmbus_open()

[Jiri Slaby]

From: "K. Y. Srinivasan" <kys@microsoft.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 40384e4bbeb9f2651fe9bffc0062d9f31ef625bf upstream.

Correctly rollback state if the failure occurs after we have handed over
the ownership of the buffer to the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/hv/channel.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index dea661331351..120237a90a86 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -178,7 +178,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 			   GFP_KERNEL);
 	if (!open_info) {
 		err = -ENOMEM;
-		goto error0;
+		goto error_gpadl;
 	}
 
 	init_completion(&open_info->waitevent);
@@ -194,7 +194,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 
 	if (userdatalen > MAX_USER_DEFINED_BYTES) {
 		err = -EINVAL;
-		goto error0;
+		goto error_gpadl;
 	}
 
 	if (userdatalen)
@@ -238,6 +238,9 @@ error1:
 	list_del(&open_info->msglistentry);
 	spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
 
+error_gpadl:
+	vmbus_teardown_gpadl(newchannel, newchannel->ringbuffer_gpadlhandle);
+
 error0:
 	free_pages((unsigned long)out,
 		get_order(send_ringbuffer_size + recv_ringbuffer_size));
-- 
2.3.5

[patch added to the 3.12 stable tree] mvsas: fix panic on expander attached SATA devices

[Jiri Slaby]

From: James Bottomley <JBottomley@Odin.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 56cbd0ccc1b508de19561211d7ab9e1c77e6b384 upstream.

mvsas is giving a General protection fault when it encounters an expander
attached ATA device.  Analysis of mvs_task_prep_ata() shows that the driver is
assuming all ATA devices are locally attached and obtaining the phy mask by
indexing the local phy table (in the HBA structure) with the phy id.  Since
expanders have many more phys than the HBA, this is causing the index into the
HBA phy table to overflow and returning rubbish as the pointer.

mvs_task_prep_ssp() instead does the phy mask using the port properties.
Mirror this in mvs_task_prep_ata() to fix the panic.

Reported-by: Adam Talbot <ajtalbot1@gmail.com>
Tested-by: Adam Talbot <ajtalbot1@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/scsi/mvsas/mv_sas.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 6b1b4e91e53f..1aa2a8cbb4df 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -441,14 +441,11 @@ static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
 static int mvs_task_prep_ata(struct mvs_info *mvi,
 			     struct mvs_task_exec_info *tei)
 {
-	struct sas_ha_struct *sha = mvi->sas;
 	struct sas_task *task = tei->task;
 	struct domain_device *dev = task->dev;
 	struct mvs_device *mvi_dev = dev->lldd_dev;
 	struct mvs_cmd_hdr *hdr = tei->hdr;
 	struct asd_sas_port *sas_port = dev->port;
-	struct sas_phy *sphy = dev->phy;
-	struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number];
 	struct mvs_slot_info *slot;
 	void *buf_prd;
 	u32 tag = tei->tag, hdr_tag;
@@ -468,7 +465,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
 	slot->tx = mvi->tx_prod;
 	del_q = TXQ_MODE_I | tag |
 		(TXQ_CMD_STP << TXQ_CMD_SHIFT) |
-		(MVS_PHY_ID << TXQ_PHY_SHIFT) |
+		((sas_port->phy_mask & TXQ_PHY_MASK) << TXQ_PHY_SHIFT) |
 		(mvi_dev->taskfileset << TXQ_SRS_SHIFT);
 	mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
 
-- 
2.3.5

[patch added to the 3.12 stable tree] stk1160: Make sure current buffer is released

[Jiri Slaby]

From: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit aeff09276748b66072f2db2e668cec955cf41959 upstream.

The available (i.e. not used) buffers are returned by stk1160_clear_queue(),
on the stop_streaming() path. However, this is insufficient and the current
buffer must be released as well. Fix it.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/media/usb/stk1160/stk1160-v4l.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c
index c45c9881bb5f..4572530346fb 100644
--- a/drivers/media/usb/stk1160/stk1160-v4l.c
+++ b/drivers/media/usb/stk1160/stk1160-v4l.c
@@ -244,6 +244,11 @@ static int stk1160_stop_streaming(struct stk1160 *dev)
 	if (mutex_lock_interruptible(&dev->v4l_lock))
 		return -ERESTARTSYS;
 
+	/*
+	 * Once URBs are cancelled, the URB complete handler
+	 * won't be running. This is required to safely release the
+	 * current buffer (dev->isoc_ctl.buf).
+	 */
 	stk1160_cancel_isoc(dev);
 
 	/*
@@ -624,8 +629,16 @@ void stk1160_clear_queue(struct stk1160 *dev)
 		stk1160_info("buffer [%p/%d] aborted\n",
 				buf, buf->vb.v4l2_buf.index);
 	}
-	/* It's important to clear current buffer */
-	dev->isoc_ctl.buf = NULL;
+
+	/* It's important to release the current buffer */
+	if (dev->isoc_ctl.buf) {
+		buf = dev->isoc_ctl.buf;
+		dev->isoc_ctl.buf = NULL;
+
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+		stk1160_info("buffer [%p/%d] aborted\n",
+				buf, buf->vb.v4l2_buf.index);
+	}
 	spin_unlock_irqrestore(&dev->buf_lock, flags);
 }
 
-- 
2.3.5

[patch added to the 3.12 stable tree] IB/core: disallow registering 0-sized memory region

[Jiri Slaby]

From: Yann Droneaud <ydroneaud@opteya.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8abaae62f3fdead8f4ce0ab46b4ab93dee39bab2 upstream.

If ib_umem_get() is called with a size equal to 0 and an
non-page aligned address, one page will be pinned and a
0-sized umem will be returned to the caller.

This should not be allowed: it's not expected for a memory
region to have a size equal to 0.

This patch adds a check to explicitly refuse to register
a 0-sized region.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/infiniband/core/umem.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 055ebebc07dd..dccb9aac35c3 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -94,6 +94,9 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	if (dmasync)
 		dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
 
+	if (!size)
+		return ERR_PTR(-EINVAL);
+
 	/*
 	 * If the combination of the addr and size requested for this memory
 	 * region causes an integer overflow, return error.
-- 
2.3.5

[patch added to the 3.12 stable tree] IB/core: don't disallow registering region starting at 0x0

[Jiri Slaby]

From: Yann Droneaud <ydroneaud@opteya.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 66578b0b2f69659f00b6169e6fe7377c4b100d18 upstream.

In a call to ib_umem_get(), if address is 0x0 and size is
already page aligned, check added in commit 8494057ab5e4
("IB/uverbs: Prevent integer overflow in ib_umem_get address
arithmetic") will refuse to register a memory region that
could otherwise be valid (provided vm.mmap_min_addr sysctl
and mmap_low_allowed SELinux knobs allow userspace to map
something at address 0x0).

This patch allows back such registration: ib_umem_get()
should probably don't care of the base address provided it
can be pinned with get_user_pages().

There's two possible overflows, in (addr + size) and in
PAGE_ALIGN(addr + size), this patch keep ensuring none
of them happen while allowing to pin memory at address
0x0. Anyway, the case of size equal 0 is no more (partially)
handled as 0-length memory region are disallowed by an
earlier check.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/infiniband/core/umem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index dccb9aac35c3..c1fef27010d4 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -101,8 +101,8 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	 * If the combination of the addr and size requested for this memory
 	 * region causes an integer overflow, return error.
 	 */
-	if ((PAGE_ALIGN(addr + size) <= size) ||
-	    (PAGE_ALIGN(addr + size) <= addr))
+	if (((addr + size) < addr) ||
+	    PAGE_ALIGN(addr + size) < (addr + size))
 		return ERR_PTR(-EINVAL);
 
 	if (!can_do_mlock())
-- 
2.3.5

[patch added to the 3.12 stable tree] IB/mlx4: Fix WQE LSO segment calculation

[Jiri Slaby]

From: Erez Shitrit <erezsh@mellanox.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit ca9b590caa17bcbbea119594992666e96cde9c2f upstream.

The current code decreases from the mss size (which is the gso_size
from the kernel skb) the size of the packet headers.

It shouldn't do that because the mss that comes from the stack
(e.g IPoIB) includes only the tcp payload without the headers.

The result is indication to the HW that each packet that the HW sends
is smaller than what it could be, and too many packets will be sent
for big messages.

An easy way to demonstrate one more aspect of the problem is by
configuring the ipoib mtu to be less than 2*hlen (2*56) and then
run app sending big TCP messages. This will tell the HW to send packets
with giant (negative value which under unsigned arithmetics becomes
a huge positive one) length and the QP moves to SQE state.

Fixes: b832be1e4007 ('IB/mlx4: Add IPoIB LSO support')
Reported-by: Matthew Finlay <matt@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/infiniband/hw/mlx4/qp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 4f10af2905b5..262a18437ceb 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -2174,8 +2174,7 @@ static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
 
 	memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen);
 
-	*lso_hdr_sz  = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
-				   wr->wr.ud.hlen);
+	*lso_hdr_sz  = cpu_to_be32(wr->wr.ud.mss << 16 | wr->wr.ud.hlen);
 	*lso_seg_len = halign;
 	return 0;
 }
-- 
2.3.5

[patch added to the 3.12 stable tree] i2c: core: Export bus recovery functions

[Jiri Slaby]

From: Mark Brown <broonie@kernel.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit c1c21f4e60ed4523292f1a89ff45a208bddd3849 upstream.

Current -next fails to link an ARM allmodconfig because drivers that use
the core recovery functions can be built as modules but those functions
are not exported:

ERROR: "i2c_generic_gpio_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined!
ERROR: "i2c_generic_scl_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined!
ERROR: "i2c_recover_bus" [drivers/i2c/busses/i2c-davinci.ko] undefined!

Add exports to fix this.

Fixes: 5f9296ba21b3c (i2c: Add bus recovery infrastructure)
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/i2c/i2c-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 3be58f89ac77..b5de139920e3 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -212,6 +212,7 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
 	adap->bus_recovery_info->set_scl(adap, 1);
 	return i2c_generic_recovery(adap);
 }
+EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
 
 int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
 {
@@ -226,6 +227,7 @@ int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery);
 
 int i2c_recover_bus(struct i2c_adapter *adap)
 {
@@ -235,6 +237,7 @@ int i2c_recover_bus(struct i2c_adapter *adap)
 	dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
 	return adap->bus_recovery_info->recover_bus(adap);
 }
+EXPORT_SYMBOL_GPL(i2c_recover_bus);
 
 static int i2c_device_probe(struct device *dev)
 {
-- 
2.3.5

[patch added to the 3.12 stable tree] drm/radeon: fix doublescan modes (v2)

[Jiri Slaby]

From: Alex Deucher <alexander.deucher@amd.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit fd99a0943ffaa0320ea4f69d09ed188f950c0432 upstream.

Use the correct flags for atom.

v2: handle DRM_MODE_FLAG_DBLCLK

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/gpu/drm/radeon/atombios_crtc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 65344d65ff91..ecd4a3dd51bb 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -332,8 +332,10 @@ atombios_set_crtc_dtd_timing(struct drm_crtc *crtc,
 		misc |= ATOM_COMPOSITESYNC;
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 		misc |= ATOM_INTERLACE;
-	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		misc |= ATOM_DOUBLE_CLOCK_MODE;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		misc |= ATOM_H_REPLICATIONBY2 | ATOM_V_REPLICATIONBY2;
 
 	args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
 	args.ucCRTC = radeon_crtc->crtc_id;
@@ -376,8 +378,10 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc,
 		misc |= ATOM_COMPOSITESYNC;
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 		misc |= ATOM_INTERLACE;
-	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		misc |= ATOM_DOUBLE_CLOCK_MODE;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		misc |= ATOM_H_REPLICATIONBY2 | ATOM_V_REPLICATIONBY2;
 
 	args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
 	args.ucCRTC = radeon_crtc->crtc_id;
-- 
2.3.5

[patch added to the 3.12 stable tree] drm/i915: cope with large i2c transfers

[Jiri Slaby]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 9535c4757b881e06fae72a857485ad57c422b8d2 upstream.

The hardware, according to the specs, is limited to 256 byte transfers,
and current driver has no protections in case users attempt to do larger
transfers. The code will just stomp over status register and mayhem
ensues.

Let's split larger transfers into digestable chunks. Doing this allows
Atmel MXT driver on Pixel 1 function properly (it hasn't since commit
9d8dc3e529a19e427fd379118acd132520935c5d "Input: atmel_mxt_ts -
implement T44 message handling" which tries to consume multiple
touchscreen/touchpad reports in a single transaction).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/gpu/drm/i915/i915_reg.h  |  1 +
 drivers/gpu/drm/i915/intel_i2c.c | 66 ++++++++++++++++++++++++++++++++++------
 2 files changed, 57 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9d344da55056..4e0053e64f14 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1105,6 +1105,7 @@
 #define   GMBUS_CYCLE_INDEX	(2<<25)
 #define   GMBUS_CYCLE_STOP	(4<<25)
 #define   GMBUS_BYTE_COUNT_SHIFT 16
+#define   GMBUS_BYTE_COUNT_MAX   256U
 #define   GMBUS_SLAVE_INDEX_SHIFT 8
 #define   GMBUS_SLAVE_ADDR_SHIFT 1
 #define   GMBUS_SLAVE_READ	(1<<0)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d1c1e0f7f262..36b720475dc0 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -276,18 +276,17 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
 }
 
 static int
-gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
-		u32 gmbus1_index)
+gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
+		      unsigned short addr, u8 *buf, unsigned int len,
+		      u32 gmbus1_index)
 {
 	int reg_offset = dev_priv->gpio_mmio_base;
-	u16 len = msg->len;
-	u8 *buf = msg->buf;
 
 	I915_WRITE(GMBUS1 + reg_offset,
 		   gmbus1_index |
 		   GMBUS_CYCLE_WAIT |
 		   (len << GMBUS_BYTE_COUNT_SHIFT) |
-		   (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+		   (addr << GMBUS_SLAVE_ADDR_SHIFT) |
 		   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
@@ -309,11 +308,35 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 }
 
 static int
-gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
+gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
+		u32 gmbus1_index)
 {
-	int reg_offset = dev_priv->gpio_mmio_base;
-	u16 len = msg->len;
 	u8 *buf = msg->buf;
+	unsigned int rx_size = msg->len;
+	unsigned int len;
+	int ret;
+
+	do {
+		len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
+
+		ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
+					    buf, len, gmbus1_index);
+		if (ret)
+			return ret;
+
+		rx_size -= len;
+		buf += len;
+	} while (rx_size != 0);
+
+	return 0;
+}
+
+static int
+gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
+		       unsigned short addr, u8 *buf, unsigned int len)
+{
+	int reg_offset = dev_priv->gpio_mmio_base;
+	unsigned int chunk_size = len;
 	u32 val, loop;
 
 	val = loop = 0;
@@ -325,8 +348,8 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 	I915_WRITE(GMBUS3 + reg_offset, val);
 	I915_WRITE(GMBUS1 + reg_offset,
 		   GMBUS_CYCLE_WAIT |
-		   (msg->len << GMBUS_BYTE_COUNT_SHIFT) |
-		   (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+		   (chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
+		   (addr << GMBUS_SLAVE_ADDR_SHIFT) |
 		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
@@ -343,6 +366,29 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 		if (ret)
 			return ret;
 	}
+
+	return 0;
+}
+
+static int
+gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
+{
+	u8 *buf = msg->buf;
+	unsigned int tx_size = msg->len;
+	unsigned int len;
+	int ret;
+
+	do {
+		len = min(tx_size, GMBUS_BYTE_COUNT_MAX);
+
+		ret = gmbus_xfer_write_chunk(dev_priv, msg->addr, buf, len);
+		if (ret)
+			return ret;
+
+		buf += len;
+		tx_size -= len;
+	} while (tx_size != 0);
+
 	return 0;
 }
 
-- 
2.3.5

[patch added to the 3.12 stable tree] RCU pathwalk breakage when running into a symlink overmounting something

[Jiri Slaby]

From: Al Viro <viro@zeniv.linux.org.uk>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 3cab989afd8d8d1bc3d99fef0e7ed87c31e7b647 upstream.

Calling unlazy_walk() in walk_component() and do_last() when we find
a symlink that needs to be followed doesn't acquire a reference to vfsmount.
That's fine when the symlink is on the same vfsmount as the parent directory
(which is almost always the case), but it's not always true - one _can_
manage to bind a symlink on top of something.  And in such cases we end up
with excessive mntput().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/namei.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 1004966437f9..c0c78e193e2a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1557,7 +1557,8 @@ static inline int walk_component(struct nameidata *nd, struct path *path,
 
 	if (should_follow_link(inode, follow)) {
 		if (nd->flags & LOOKUP_RCU) {
-			if (unlikely(unlazy_walk(nd, path->dentry))) {
+			if (unlikely(nd->path.mnt != path->mnt ||
+				     unlazy_walk(nd, path->dentry))) {
 				err = -ECHILD;
 				goto out_err;
 			}
@@ -3023,7 +3024,8 @@ finish_lookup:
 
 	if (should_follow_link(inode, !symlink_ok)) {
 		if (nd->flags & LOOKUP_RCU) {
-			if (unlikely(unlazy_walk(nd, path->dentry))) {
+			if (unlikely(nd->path.mnt != path->mnt ||
+				     unlazy_walk(nd, path->dentry))) {
 				error = -ECHILD;
 				goto out;
 			}
-- 
2.3.5

[patch added to the 3.12 stable tree] ksoftirqd: Enable IRQs and call cond_resched() before poking RCU

[Jiri Slaby]

From: Calvin Owens <calvinowens@fb.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 28423ad283d5348793b0c45cc9b1af058e776fd6 upstream.

While debugging an issue with excessive softirq usage, I encountered the
following note in commit 3e339b5dae24a706 ("softirq: Use hotplug thread
infrastructure"):

    [ paulmck: Call rcu_note_context_switch() with interrupts enabled. ]

...but despite this note, the patch still calls RCU with IRQs disabled.

This seemingly innocuous change caused a significant regression in softirq
CPU usage on the sending side of a large TCP transfer (~1 GB/s): when
introducing 0.01% packet loss, the softirq usage would jump to around 25%,
spiking as high as 50%. Before the change, the usage would never exceed 5%.

Moving the call to rcu_note_context_switch() after the cond_sched() call,
as it was originally before the hotplug patch, completely eliminated this
problem.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 kernel/softirq.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/softirq.c b/kernel/softirq.c
index d7d498d8cc4f..b331c8756543 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -772,9 +772,13 @@ static void run_ksoftirqd(unsigned int cpu)
 	local_irq_disable();
 	if (local_softirq_pending()) {
 		__do_softirq();
-		rcu_note_context_switch(cpu);
 		local_irq_enable();
 		cond_resched();
+
+		preempt_disable();
+		rcu_note_context_switch(cpu);
+		preempt_enable();
+
 		return;
 	}
 	local_irq_enable();
-- 
2.3.5

[patch added to the 3.12 stable tree] e1000: add dummy allocator to fix race condition between mtu change and netpoll

[Jiri Slaby]

From: Sabrina Dubroca <sd@queasysnail.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 08e8331654d1d7b2c58045e549005bc356aa7810 upstream.

There is a race condition between e1000_change_mtu's cleanups and
netpoll, when we change the MTU across jumbo size:

Changing MTU frees all the rx buffers:
    e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings ->
        e1000_clean_rx_ring

Then, close to the end of e1000_change_mtu:
    pr_info -> ... -> netpoll_poll_dev -> e1000_clean ->
        e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag

And when we come back to do the rest of the MTU change:
    e1000_up -> e1000_configure -> e1000_configure_rx ->
        e1000_alloc_jumbo_rx_buffers

alloc_jumbo finds the buffers already != NULL, since data (shared with
page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage,
or at least not what is expected when in jumbo state.

This results in an unusable adapter (packets don't get through), and a
NULL pointer dereference on the next call to e1000_clean_rx_ring
(other mtu change, link down, shutdown):

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81194d6e>] put_compound_page+0x7e/0x330

    [...]

Call Trace:
 [<ffffffff81195445>] put_page+0x55/0x60
 [<ffffffff815d9f44>] e1000_clean_rx_ring+0x134/0x200
 [<ffffffff815da055>] e1000_clean_all_rx_rings+0x45/0x60
 [<ffffffff815df5e0>] e1000_down+0x1c0/0x1d0
 [<ffffffff811e2260>] ? deactivate_slab+0x7f0/0x840
 [<ffffffff815e21bc>] e1000_change_mtu+0xdc/0x170
 [<ffffffff81647050>] dev_set_mtu+0xa0/0x140
 [<ffffffff81664218>] do_setlink+0x218/0xac0
 [<ffffffff814459e9>] ? nla_parse+0xb9/0x120
 [<ffffffff816652d0>] rtnl_newlink+0x6d0/0x890
 [<ffffffff8104f000>] ? kvm_clock_read+0x20/0x40
 [<ffffffff810a2068>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff81663802>] rtnetlink_rcv_msg+0x92/0x260

By setting the allocator to a dummy version, netpoll can't mess up our
rx buffers.  The allocator is set back to a sane value in
e1000_configure_rx.

Fixes: edbbb3ca1077 ("e1000: implement jumbo receive with partial descriptors")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 15c85d4f3774..b7f68883da64 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -144,6 +144,11 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 				     struct e1000_rx_ring *rx_ring,
 				     int *work_done, int work_to_do);
+static void e1000_alloc_dummy_rx_buffers(struct e1000_adapter *adapter,
+					 struct e1000_rx_ring *rx_ring,
+					 int cleaned_count)
+{
+}
 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 				   struct e1000_rx_ring *rx_ring,
 				   int cleaned_count);
@@ -3566,8 +3571,11 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		msleep(1);
 	/* e1000_down has a dependency on max_frame_size */
 	hw->max_frame_size = max_frame;
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
+		/* prevent buffers from being reallocated */
+		adapter->alloc_rx_buf = e1000_alloc_dummy_rx_buffers;
 		e1000_down(adapter);
+	}
 
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
-- 
2.3.5

[patch added to the 3.12 stable tree] lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR

[Jiri Slaby]

From: mancha security <mancha1@zoho.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 0b053c9518292705736329a8fe20ef4686ffc8e9 upstream.

OPTIMIZER_HIDE_VAR(), as defined when using gcc, is insufficient to
ensure protection from dead store optimization.

For the random driver and crypto drivers, calls are emitted ...

  $ gdb vmlinux
  (gdb) disassemble memzero_explicit
  Dump of assembler code for function memzero_explicit:
    0xffffffff813a18b0 <+0>:	push   %rbp
    0xffffffff813a18b1 <+1>:	mov    %rsi,%rdx
    0xffffffff813a18b4 <+4>:	xor    %esi,%esi
    0xffffffff813a18b6 <+6>:	mov    %rsp,%rbp
    0xffffffff813a18b9 <+9>:	callq  0xffffffff813a7120 <memset>
    0xffffffff813a18be <+14>:	pop    %rbp
    0xffffffff813a18bf <+15>:	retq
  End of assembler dump.

  (gdb) disassemble extract_entropy
  [...]
    0xffffffff814a5009 <+313>:	mov    %r12,%rdi
    0xffffffff814a500c <+316>:	mov    $0xa,%esi
    0xffffffff814a5011 <+321>:	callq  0xffffffff813a18b0 <memzero_explicit>
    0xffffffff814a5016 <+326>:	mov    -0x48(%rbp),%rax
  [...]

... but in case in future we might use facilities such as LTO, then
OPTIMIZER_HIDE_VAR() is not sufficient to protect gcc from a possible
eviction of the memset(). We have to use a compiler barrier instead.

Minimal test example when we assume memzero_explicit() would *not* be
a call, but would have been *inlined* instead:

  static inline void memzero_explicit(void *s, size_t count)
  {
    memset(s, 0, count);
    <foo>
  }

  int main(void)
  {
    char buff[20];

    snprintf(buff, sizeof(buff) - 1, "test");
    printf("%s", buff);

    memzero_explicit(buff, sizeof(buff));
    return 0;
  }

With <foo> := OPTIMIZER_HIDE_VAR():

  (gdb) disassemble main
  Dump of assembler code for function main:
  [...]
   0x0000000000400464 <+36>:	callq  0x400410 <printf@plt>
   0x0000000000400469 <+41>:	xor    %eax,%eax
   0x000000000040046b <+43>:	add    $0x28,%rsp
   0x000000000040046f <+47>:	retq
  End of assembler dump.

With <foo> := barrier():

  (gdb) disassemble main
  Dump of assembler code for function main:
  [...]
   0x0000000000400464 <+36>:	callq  0x400410 <printf@plt>
   0x0000000000400469 <+41>:	movq   $0x0,(%rsp)
   0x0000000000400471 <+49>:	movq   $0x0,0x8(%rsp)
   0x000000000040047a <+58>:	movl   $0x0,0x10(%rsp)
   0x0000000000400482 <+66>:	xor    %eax,%eax
   0x0000000000400484 <+68>:	add    $0x28,%rsp
   0x0000000000400488 <+72>:	retq
  End of assembler dump.

As can be seen, movq, movq, movl are being emitted inlined
via memset().

Reference: http://thread.gmane.org/gmane.linux.kernel.cryptoapi/13764/
Fixes: d4c5efdb9777 ("random: add and use memzero_explicit() for clearing data")
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: mancha security <mancha1@zoho.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 lib/string.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/string.c b/lib/string.c
index 43d0781daf47..cb9ea2181557 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -598,7 +598,7 @@ EXPORT_SYMBOL(memset);
 void memzero_explicit(void *s, size_t count)
 {
 	memset(s, 0, count);
-	OPTIMIZER_HIDE_VAR(s);
+	barrier();
 }
 EXPORT_SYMBOL(memzero_explicit);
 
-- 
2.3.5

[patch added to the 3.12 stable tree] wl18xx: show rx_frames_per_rates as an array as it really is

[Jiri Slaby]

From: Nicolas Iooss <nicolas.iooss_linux@m4x.org>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit a3fa71c40f1853d0c27e8f5bc01a722a705d9682 upstream.

In struct wl18xx_acx_rx_rate_stat, rx_frames_per_rates field is an
array, not a number.  This means WL18XX_DEBUGFS_FWSTATS_FILE can't be
used to display this field in debugfs (it would display a pointer, not
the actual data).  Use WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY instead.

This bug has been found by adding a __printf attribute to
wl1271_format_buffer.  gcc complained about "format '%u' expects
argument of type 'unsigned int', but argument 5 has type 'u32 *'".

Fixes: c5d94169e818 ("wl18xx: use new fw stats structures")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/wireless/ti/wl18xx/debugfs.c | 2 +-
 drivers/net/wireless/ti/wlcore/debugfs.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.c b/drivers/net/wireless/ti/wl18xx/debugfs.c
index 7f1669cdea09..779dc2b2ca75 100644
--- a/drivers/net/wireless/ti/wl18xx/debugfs.c
+++ b/drivers/net/wireless/ti/wl18xx/debugfs.c
@@ -136,7 +136,7 @@ WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, protection_filter, "%u");
 WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, accum_arp_pend_requests, "%u");
 WL18XX_DEBUGFS_FWSTATS_FILE(rx_filter, max_arp_queue_dep, "%u");
 
-WL18XX_DEBUGFS_FWSTATS_FILE(rx_rate, rx_frames_per_rates, "%u");
+WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(rx_rate, rx_frames_per_rates, 50);
 
 WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(aggr_size, tx_agg_vs_rate,
 				  AGGR_STATS_TX_AGG*AGGR_STATS_TX_RATE);
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.h b/drivers/net/wireless/ti/wlcore/debugfs.h
index f7381dd69009..1bce4325e86b 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.h
+++ b/drivers/net/wireless/ti/wlcore/debugfs.h
@@ -26,8 +26,8 @@
 
 #include "wlcore.h"
 
-int wl1271_format_buffer(char __user *userbuf, size_t count,
-			 loff_t *ppos, char *fmt, ...);
+__printf(4, 5) int wl1271_format_buffer(char __user *userbuf, size_t count,
+					loff_t *ppos, char *fmt, ...);
 
 int wl1271_debugfs_init(struct wl1271 *wl);
 void wl1271_debugfs_exit(struct wl1271 *wl);
-- 
2.3.5

[patch added to the 3.12 stable tree] crypto: omap-aes - Fix support for unequal lengths

[Jiri Slaby]

From: "Vutla, Lokesh" <lokeshvutla@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 6d7e7e02a044025237b6f62a20521170b794537f upstream.

For cases where total length of an input SGs is not same as
length of the input data for encryption, omap-aes driver
crashes. This happens in the case when IPsec is trying to use
omap-aes driver.

To avoid this, we copy all the pages from the input SG list
into a contiguous buffer and prepare a single element SG list
for this buffer with length as the total bytes to crypt, which is
similar thing that is done in case of unaligned lengths.

Fixes: 6242332ff2f3 ("crypto: omap-aes - Add support for cases of unaligned lengths")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/crypto/omap-aes.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index ce791c2f81f7..56374ee92365 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -554,15 +554,23 @@ static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd)
 	return err;
 }
 
-int omap_aes_check_aligned(struct scatterlist *sg)
+int omap_aes_check_aligned(struct scatterlist *sg, int total)
 {
+	int len = 0;
+
 	while (sg) {
 		if (!IS_ALIGNED(sg->offset, 4))
 			return -1;
 		if (!IS_ALIGNED(sg->length, AES_BLOCK_SIZE))
 			return -1;
+
+		len += sg->length;
 		sg = sg_next(sg);
 	}
+
+	if (len != total)
+		return -1;
+
 	return 0;
 }
 
@@ -633,8 +641,8 @@ static int omap_aes_handle_queue(struct omap_aes_dev *dd,
 	dd->in_sg = req->src;
 	dd->out_sg = req->dst;
 
-	if (omap_aes_check_aligned(dd->in_sg) ||
-	    omap_aes_check_aligned(dd->out_sg)) {
+	if (omap_aes_check_aligned(dd->in_sg, dd->total) ||
+	    omap_aes_check_aligned(dd->out_sg, dd->total)) {
 		if (omap_aes_copy_sgs(dd))
 			pr_err("Failed to copy SGs for unaligned cases\n");
 		dd->sgs_copied = 1;
-- 
2.3.5

[patch added to the 3.12 stable tree] C6x: time: Ensure consistency in __init

[Jiri Slaby]

From: Nishanth Menon <nm@ti.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit f4831605f2dacd12730fe73961c77253cc2ea425 upstream.

time_init invokes timer64_init (which is __init annotation)
since all of these are invoked at init time, lets maintain
consistency by ensuring time_init is marked appropriately
as well.

This fixes the following warning with CONFIG_DEBUG_SECTION_MISMATCH=y

WARNING: vmlinux.o(.text+0x3bfc): Section mismatch in reference from the function time_init() to the function .init.text:timer64_init()
The function time_init() references
the function __init timer64_init().
This is often because time_init lacks a __init
annotation or the annotation of timer64_init is wrong.

Fixes: 546a39546c64 ("C6X: time management")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/c6x/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/c6x/kernel/time.c b/arch/c6x/kernel/time.c
index 356ee84cad95..04845aaf5985 100644
--- a/arch/c6x/kernel/time.c
+++ b/arch/c6x/kernel/time.c
@@ -49,7 +49,7 @@ u64 sched_clock(void)
 	return (tsc * sched_clock_multiplier) >> SCHED_CLOCK_SHIFT;
 }
 
-void time_init(void)
+void __init time_init(void)
 {
 	u64 tmp = (u64)NSEC_PER_SEC << SCHED_CLOCK_SHIFT;
 
-- 
2.3.5

[patch added to the 3.12 stable tree] memstick: mspro_block: add missing curly braces

[Jiri Slaby]

From: Dan Carpenter <dan.carpenter@oracle.com>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 13f6b191aaa11c7fd718d35a0c565f3c16bc1d99 upstream.

Using the indenting we can see the curly braces were obviously intended.
This is a static checker fix, but my guess is that we don't read enough
bytes, because we don't calculate "t_len" correctly.

Fixes: f1d82698029b ('memstick: use fully asynchronous request processing')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/memstick/core/mspro_block.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index f4176ca3a794..cdd61ab5c2b5 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -758,7 +758,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error)
 
 		if (error || (card->current_mrq.tpc == MSPRO_CMD_STOP)) {
 			if (msb->data_dir == READ) {
-				for (cnt = 0; cnt < msb->current_seg; cnt++)
+				for (cnt = 0; cnt < msb->current_seg; cnt++) {
 					t_len += msb->req_sg[cnt].length
 						 / msb->page_size;
 
@@ -766,6 +766,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error)
 						t_len += msb->current_page - 1;
 
 					t_len *= msb->page_size;
+				}
 			}
 		} else
 			t_len = blk_rq_bytes(msb->block_req);
-- 
2.3.5

[patch added to the 3.12 stable tree] driver core: bus: Goto appropriate labels on failure in bus_add_device

[Jiri Slaby]

From: Junjie Mao <junjie_mao@yeah.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 1c34203a1496d1849ba978021b878b3447d433c8 upstream.

It is not necessary to call device_remove_groups() when device_add_groups()
fails.

The group added by device_add_groups() should be removed if sysfs_create_link()
fails.

Fixes: fa6fdb33b486 ("driver core: bus_type: add dev_groups")
Signed-off-by: Junjie Mao <junjie_mao@yeah.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/base/bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index aed92e41f291..f95dead9a8c2 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -504,11 +504,11 @@ int bus_add_device(struct device *dev)
 			goto out_put;
 		error = device_add_groups(dev, bus->dev_groups);
 		if (error)
-			goto out_groups;
+			goto out_id;
 		error = sysfs_create_link(&bus->p->devices_kset->kobj,
 						&dev->kobj, dev_name(dev));
 		if (error)
-			goto out_id;
+			goto out_groups;
 		error = sysfs_create_link(&dev->kobj,
 				&dev->bus->p->subsys.kobj, "subsystem");
 		if (error)
-- 
2.3.5

[patch added to the 3.12 stable tree] fs: take i_mutex during prepare_binprm for set[ug]id executables

[Jiri Slaby]

From: Jann Horn <jann@thejh.net>

This patch has been added to the 3.12 stable tree. If you have any
objections, please let us know.

===============

commit 8b01fc86b9f425899f8a3a8fc1c47d73c2c20543 upstream.

This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.

This patch was mostly written by Linus Torvalds.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Charles Williams <ciwillia@brocade.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/exec.c | 76 ++++++++++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 48 insertions(+), 28 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 26bb91bf203b..d8b46a197172 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1272,6 +1272,53 @@ static int check_unsafe_exec(struct linux_binprm *bprm)
 	return res;
 }
 
+static void bprm_fill_uid(struct linux_binprm *bprm)
+{
+	struct inode *inode;
+	unsigned int mode;
+	kuid_t uid;
+	kgid_t gid;
+
+	/* clear any previous set[ug]id data from a previous binary */
+	bprm->cred->euid = current_euid();
+	bprm->cred->egid = current_egid();
+
+	if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
+		return;
+
+	if (current->no_new_privs)
+		return;
+
+	inode = file_inode(bprm->file);
+	mode = ACCESS_ONCE(inode->i_mode);
+	if (!(mode & (S_ISUID|S_ISGID)))
+		return;
+
+	/* Be careful if suid/sgid is set */
+	mutex_lock(&inode->i_mutex);
+
+	/* reload atomically mode/uid/gid now that lock held */
+	mode = inode->i_mode;
+	uid = inode->i_uid;
+	gid = inode->i_gid;
+	mutex_unlock(&inode->i_mutex);
+
+	/* We ignore suid/sgid if there are no mappings for them in the ns */
+	if (!kuid_has_mapping(bprm->cred->user_ns, uid) ||
+		 !kgid_has_mapping(bprm->cred->user_ns, gid))
+		return;
+
+	if (mode & S_ISUID) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->euid = uid;
+	}
+
+	if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
+		bprm->per_clear |= PER_CLEAR_ON_SETID;
+		bprm->cred->egid = gid;
+	}
+}
+
 /* 
  * Fill the binprm structure from the inode. 
  * Check permissions, then read the first 128 (BINPRM_BUF_SIZE) bytes
@@ -1280,39 +1327,12 @@ static int check_unsafe_exec(struct linux_binprm *bprm)
  */
 int prepare_binprm(struct linux_binprm *bprm)
 {
-	umode_t mode;
-	struct inode * inode = file_inode(bprm->file);
 	int retval;
 
-	mode = inode->i_mode;
 	if (bprm->file->f_op == NULL)
 		return -EACCES;
 
-	/* clear any previous set[ug]id data from a previous binary */
-	bprm->cred->euid = current_euid();
-	bprm->cred->egid = current_egid();
-
-	if (!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID) &&
-	    !current->no_new_privs &&
-	    kuid_has_mapping(bprm->cred->user_ns, inode->i_uid) &&
-	    kgid_has_mapping(bprm->cred->user_ns, inode->i_gid)) {
-		/* Set-uid? */
-		if (mode & S_ISUID) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->euid = inode->i_uid;
-		}
-
-		/* Set-gid? */
-		/*
-		 * If setgid is set but no group execute bit then this
-		 * is a candidate for mandatory locking, not a setgid
-		 * executable.
-		 */
-		if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
-			bprm->per_clear |= PER_CLEAR_ON_SETID;
-			bprm->cred->egid = inode->i_gid;
-		}
-	}
+	bprm_fill_uid(bprm);
 
 	/* fill in binprm security blob */
 	retval = security_bprm_set_creds(bprm);
-- 
2.3.5