* [PATCH 0/3] mfd: ax20x: Add axp152 support @ 2015-06-23 19:41 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: Lee Jones, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw Hi Lee, Maxime, Here is a small patch-series adding mfd support for the AXP152, this gives us power-off and power-button capabilities on the AXP152 as those parts are compatible with the AXP20x PMIC-s. Lee, if you can review and merge the actual mfd patch, then Maxime can pick up the dts patches once the mfd bits are merged. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 0/3] mfd: ax20x: Add axp152 support @ 2015-06-23 19:41 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: linux-arm-kernel Hi Lee, Maxime, Here is a small patch-series adding mfd support for the AXP152, this gives us power-off and power-button capabilities on the AXP152 as those parts are compatible with the AXP20x PMIC-s. Lee, if you can review and merge the actual mfd patch, then Maxime can pick up the dts patches once the mfd bits are merged. Regards, Hans ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <1435088503-20776-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* [PATCH 1/3] mfd: ax20x: Add axp152 support 2015-06-23 19:41 ` Hans de Goede @ 2015-06-23 19:41 ` Hans de Goede -1 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: Lee Jones, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek, Hans de Goede From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> The axp152 is a stripped down version of the axp202 pmic with the battery charging function removed as it is intended for top-set boxes. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 4 +- drivers/mfd/axp20x.c | 92 ++++++++++++++++++++++++ include/linux/mfd/axp20x.h | 61 +++++++++++++++- 3 files changed, 155 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 753f14f..4181122 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -1,12 +1,14 @@ AXP family PMIC device tree bindings The axp20x family current members : +axp152 (X-Powers) axp202 (X-Powers) axp209 (X-Powers) axp221 (X-Powers) Required properties: -- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221" +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", + "x-powers,axp221" - reg: The I2C slave address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index ca4a604..49bba28 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -30,12 +30,34 @@ #define AXP20X_OFF 0x80 static const char * const axp20x_model_names[] = { + "AXP152", "AXP202", "AXP209", "AXP221", "AXP288", }; +static const struct regmap_range axp152_writeable_ranges[] = { + regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), + regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), +}; + +static const struct regmap_range axp152_volatile_ranges[] = { + regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), + regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), + regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), +}; + +static const struct regmap_access_table axp152_writeable_table = { + .yes_ranges = axp152_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), +}; + +static const struct regmap_access_table axp152_volatile_table = { + .yes_ranges = axp152_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), +}; + static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), @@ -99,6 +121,20 @@ static const struct regmap_access_table axp288_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), }; +static struct resource axp152_pek_resources[] = { + { + .name = "PEK_DBR", + .start = AXP152_IRQ_PEK_RIS_EDGE, + .end = AXP152_IRQ_PEK_RIS_EDGE, + .flags = IORESOURCE_IRQ, + }, { + .name = "PEK_DBF", + .start = AXP152_IRQ_PEK_FAL_EDGE, + .end = AXP152_IRQ_PEK_FAL_EDGE, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource axp20x_pek_resources[] = { { .name = "PEK_DBR", @@ -167,6 +203,15 @@ static struct resource axp288_fuel_gauge_resources[] = { }, }; +static const struct regmap_config axp152_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp152_writeable_table, + .volatile_table = &axp152_volatile_table, + .max_register = AXP152_PWM1_DUTY_CYCLE, + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_config axp20x_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -197,6 +242,26 @@ static const struct regmap_config axp288_regmap_config = { #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } +static const struct regmap_irq axp152_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6), + INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3), + INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5), + INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4), + INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3), + INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2), + INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1), + INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0), + INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7), + INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6), + INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5), + INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3), + INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2), + INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1), + INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0), +}; + static const struct regmap_irq axp20x_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), @@ -306,6 +371,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { }; static const struct of_device_id axp20x_of_match[] = { + { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, @@ -330,6 +396,18 @@ static const struct acpi_device_id axp20x_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); +static const struct regmap_irq_chip axp152_regmap_irq_chip = { + .name = "axp152_irq_chip", + .status_base = AXP152_IRQ1_STATE, + .ack_base = AXP152_IRQ1_STATE, + .mask_base = AXP152_IRQ1_EN, + .mask_invert = true, + .init_ack_masked = true, + .irqs = axp152_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp152_regmap_irqs), + .num_regs = 3, +}; + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { .name = "axp20x_irq_chip", .status_base = AXP20X_IRQ1_STATE, @@ -393,6 +471,14 @@ static struct mfd_cell axp22x_cells[] = { }, }; +static struct mfd_cell axp152_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp152_pek_resources), + .resources = axp152_pek_resources, + }, +}; + static struct resource axp288_adc_resources[] = { { .name = "GPADC", @@ -531,6 +617,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) } switch (axp20x->variant) { + case AXP152_ID: + axp20x->nr_cells = ARRAY_SIZE(axp152_cells); + axp20x->cells = axp152_cells; + axp20x->regmap_cfg = &axp152_regmap_config; + axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; + break; case AXP202_ID: case AXP209_ID: axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 8ec996e..271a26f 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,7 +14,8 @@ #include <linux/regmap.h> enum { - AXP202_ID = 0, + AXP152_ID = 0, + AXP202_ID, AXP209_ID, AXP221_ID, AXP288_ID, @@ -24,6 +25,24 @@ enum { #define AXP20X_DATACACHE(m) (0x04 + (m)) /* Power supply */ +#define AXP152_PWR_OP_MODE 0x01 +#define AXP152_LDO3456_DC1234_CTRL 0x12 +#define AXP152_ALDO_OP_MODE 0x13 +#define AXP152_LDO0_CTRL 0x15 +#define AXP152_DCDC2_V_OUT 0x23 +#define AXP152_DCDC2_V_SCAL 0x25 +#define AXP152_DCDC1_V_OUT 0x26 +#define AXP152_DCDC3_V_OUT 0x27 +#define AXP152_ALDO12_V_OUT 0x28 +#define AXP152_DLDO1_V_OUT 0x29 +#define AXP152_DLDO2_V_OUT 0x2a +#define AXP152_DCDC4_V_OUT 0x2b +#define AXP152_V_OFF 0x31 +#define AXP152_OFF_CTRL 0x32 +#define AXP152_PEK_KEY 0x36 +#define AXP152_DCDC_FREQ 0x37 +#define AXP152_DCDC_MODE 0x80 + #define AXP20X_PWR_INPUT_STATUS 0x00 #define AXP20X_PWR_OP_MODE 0x01 #define AXP20X_USB_OTG_STATUS 0x02 @@ -71,6 +90,13 @@ enum { #define AXP22X_CHRG_CTRL3 0x35 /* Interrupt */ +#define AXP152_IRQ1_EN 0x40 +#define AXP152_IRQ2_EN 0x41 +#define AXP152_IRQ3_EN 0x42 +#define AXP152_IRQ1_STATE 0x48 +#define AXP152_IRQ2_STATE 0x49 +#define AXP152_IRQ3_STATE 0x4a + #define AXP20X_IRQ1_EN 0x40 #define AXP20X_IRQ2_EN 0x41 #define AXP20X_IRQ3_EN 0x42 @@ -129,6 +155,19 @@ enum { #define AXP22X_PWREN_CTRL2 0x8d /* GPIO */ +#define AXP152_GPIO0_CTRL 0x90 +#define AXP152_GPIO1_CTRL 0x91 +#define AXP152_GPIO2_CTRL 0x92 +#define AXP152_GPIO3_CTRL 0x93 +#define AXP152_LDOGPIO2_V_OUT 0x96 +#define AXP152_GPIO_INPUT 0x97 +#define AXP152_PWM0_FREQ_X 0x98 +#define AXP152_PWM0_FREQ_Y 0x99 +#define AXP152_PWM0_DUTY_CYCLE 0x9a +#define AXP152_PWM1_FREQ_X 0x9b +#define AXP152_PWM1_FREQ_Y 0x9c +#define AXP152_PWM1_DUTY_CYCLE 0x9d + #define AXP20X_GPIO0_CTRL 0x90 #define AXP20X_LDO5_V_OUT 0x91 #define AXP20X_GPIO1_CTRL 0x92 @@ -226,6 +265,26 @@ enum { /* IRQs */ enum { + AXP152_IRQ_LDO0IN_CONNECT = 1, + AXP152_IRQ_LDO0IN_REMOVAL, + AXP152_IRQ_ALDO0IN_CONNECT, + AXP152_IRQ_ALDO0IN_REMOVAL, + AXP152_IRQ_DCDC1_V_LOW, + AXP152_IRQ_DCDC2_V_LOW, + AXP152_IRQ_DCDC3_V_LOW, + AXP152_IRQ_DCDC4_V_LOW, + AXP152_IRQ_PEK_SHORT, + AXP152_IRQ_PEK_LONG, + AXP152_IRQ_TIMER, + AXP152_IRQ_PEK_RIS_EDGE, + AXP152_IRQ_PEK_FAL_EDGE, + AXP152_IRQ_GPIO3_INPUT, + AXP152_IRQ_GPIO2_INPUT, + AXP152_IRQ_GPIO1_INPUT, + AXP152_IRQ_GPIO0_INPUT, +}; + +enum { AXP20X_IRQ_ACIN_OVER_V = 1, AXP20X_IRQ_ACIN_PLUGIN, AXP20X_IRQ_ACIN_REMOVAL, -- 2.3.6 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 1/3] mfd: ax20x: Add axp152 support @ 2015-06-23 19:41 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: linux-arm-kernel From: Michal Suchanek <hramrach@gmail.com> The axp152 is a stripped down version of the axp202 pmic with the battery charging function removed as it is intended for top-set boxes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 4 +- drivers/mfd/axp20x.c | 92 ++++++++++++++++++++++++ include/linux/mfd/axp20x.h | 61 +++++++++++++++- 3 files changed, 155 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 753f14f..4181122 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -1,12 +1,14 @@ AXP family PMIC device tree bindings The axp20x family current members : +axp152 (X-Powers) axp202 (X-Powers) axp209 (X-Powers) axp221 (X-Powers) Required properties: -- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221" +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", + "x-powers,axp221" - reg: The I2C slave address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index ca4a604..49bba28 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -30,12 +30,34 @@ #define AXP20X_OFF 0x80 static const char * const axp20x_model_names[] = { + "AXP152", "AXP202", "AXP209", "AXP221", "AXP288", }; +static const struct regmap_range axp152_writeable_ranges[] = { + regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), + regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), +}; + +static const struct regmap_range axp152_volatile_ranges[] = { + regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), + regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), + regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), +}; + +static const struct regmap_access_table axp152_writeable_table = { + .yes_ranges = axp152_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), +}; + +static const struct regmap_access_table axp152_volatile_table = { + .yes_ranges = axp152_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), +}; + static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), @@ -99,6 +121,20 @@ static const struct regmap_access_table axp288_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), }; +static struct resource axp152_pek_resources[] = { + { + .name = "PEK_DBR", + .start = AXP152_IRQ_PEK_RIS_EDGE, + .end = AXP152_IRQ_PEK_RIS_EDGE, + .flags = IORESOURCE_IRQ, + }, { + .name = "PEK_DBF", + .start = AXP152_IRQ_PEK_FAL_EDGE, + .end = AXP152_IRQ_PEK_FAL_EDGE, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource axp20x_pek_resources[] = { { .name = "PEK_DBR", @@ -167,6 +203,15 @@ static struct resource axp288_fuel_gauge_resources[] = { }, }; +static const struct regmap_config axp152_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp152_writeable_table, + .volatile_table = &axp152_volatile_table, + .max_register = AXP152_PWM1_DUTY_CYCLE, + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_config axp20x_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -197,6 +242,26 @@ static const struct regmap_config axp288_regmap_config = { #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } +static const struct regmap_irq axp152_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6), + INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3), + INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5), + INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4), + INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3), + INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2), + INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1), + INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0), + INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7), + INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6), + INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5), + INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3), + INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2), + INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1), + INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0), +}; + static const struct regmap_irq axp20x_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), @@ -306,6 +371,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { }; static const struct of_device_id axp20x_of_match[] = { + { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, @@ -330,6 +396,18 @@ static const struct acpi_device_id axp20x_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); +static const struct regmap_irq_chip axp152_regmap_irq_chip = { + .name = "axp152_irq_chip", + .status_base = AXP152_IRQ1_STATE, + .ack_base = AXP152_IRQ1_STATE, + .mask_base = AXP152_IRQ1_EN, + .mask_invert = true, + .init_ack_masked = true, + .irqs = axp152_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp152_regmap_irqs), + .num_regs = 3, +}; + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { .name = "axp20x_irq_chip", .status_base = AXP20X_IRQ1_STATE, @@ -393,6 +471,14 @@ static struct mfd_cell axp22x_cells[] = { }, }; +static struct mfd_cell axp152_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp152_pek_resources), + .resources = axp152_pek_resources, + }, +}; + static struct resource axp288_adc_resources[] = { { .name = "GPADC", @@ -531,6 +617,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) } switch (axp20x->variant) { + case AXP152_ID: + axp20x->nr_cells = ARRAY_SIZE(axp152_cells); + axp20x->cells = axp152_cells; + axp20x->regmap_cfg = &axp152_regmap_config; + axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; + break; case AXP202_ID: case AXP209_ID: axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 8ec996e..271a26f 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,7 +14,8 @@ #include <linux/regmap.h> enum { - AXP202_ID = 0, + AXP152_ID = 0, + AXP202_ID, AXP209_ID, AXP221_ID, AXP288_ID, @@ -24,6 +25,24 @@ enum { #define AXP20X_DATACACHE(m) (0x04 + (m)) /* Power supply */ +#define AXP152_PWR_OP_MODE 0x01 +#define AXP152_LDO3456_DC1234_CTRL 0x12 +#define AXP152_ALDO_OP_MODE 0x13 +#define AXP152_LDO0_CTRL 0x15 +#define AXP152_DCDC2_V_OUT 0x23 +#define AXP152_DCDC2_V_SCAL 0x25 +#define AXP152_DCDC1_V_OUT 0x26 +#define AXP152_DCDC3_V_OUT 0x27 +#define AXP152_ALDO12_V_OUT 0x28 +#define AXP152_DLDO1_V_OUT 0x29 +#define AXP152_DLDO2_V_OUT 0x2a +#define AXP152_DCDC4_V_OUT 0x2b +#define AXP152_V_OFF 0x31 +#define AXP152_OFF_CTRL 0x32 +#define AXP152_PEK_KEY 0x36 +#define AXP152_DCDC_FREQ 0x37 +#define AXP152_DCDC_MODE 0x80 + #define AXP20X_PWR_INPUT_STATUS 0x00 #define AXP20X_PWR_OP_MODE 0x01 #define AXP20X_USB_OTG_STATUS 0x02 @@ -71,6 +90,13 @@ enum { #define AXP22X_CHRG_CTRL3 0x35 /* Interrupt */ +#define AXP152_IRQ1_EN 0x40 +#define AXP152_IRQ2_EN 0x41 +#define AXP152_IRQ3_EN 0x42 +#define AXP152_IRQ1_STATE 0x48 +#define AXP152_IRQ2_STATE 0x49 +#define AXP152_IRQ3_STATE 0x4a + #define AXP20X_IRQ1_EN 0x40 #define AXP20X_IRQ2_EN 0x41 #define AXP20X_IRQ3_EN 0x42 @@ -129,6 +155,19 @@ enum { #define AXP22X_PWREN_CTRL2 0x8d /* GPIO */ +#define AXP152_GPIO0_CTRL 0x90 +#define AXP152_GPIO1_CTRL 0x91 +#define AXP152_GPIO2_CTRL 0x92 +#define AXP152_GPIO3_CTRL 0x93 +#define AXP152_LDOGPIO2_V_OUT 0x96 +#define AXP152_GPIO_INPUT 0x97 +#define AXP152_PWM0_FREQ_X 0x98 +#define AXP152_PWM0_FREQ_Y 0x99 +#define AXP152_PWM0_DUTY_CYCLE 0x9a +#define AXP152_PWM1_FREQ_X 0x9b +#define AXP152_PWM1_FREQ_Y 0x9c +#define AXP152_PWM1_DUTY_CYCLE 0x9d + #define AXP20X_GPIO0_CTRL 0x90 #define AXP20X_LDO5_V_OUT 0x91 #define AXP20X_GPIO1_CTRL 0x92 @@ -226,6 +265,26 @@ enum { /* IRQs */ enum { + AXP152_IRQ_LDO0IN_CONNECT = 1, + AXP152_IRQ_LDO0IN_REMOVAL, + AXP152_IRQ_ALDO0IN_CONNECT, + AXP152_IRQ_ALDO0IN_REMOVAL, + AXP152_IRQ_DCDC1_V_LOW, + AXP152_IRQ_DCDC2_V_LOW, + AXP152_IRQ_DCDC3_V_LOW, + AXP152_IRQ_DCDC4_V_LOW, + AXP152_IRQ_PEK_SHORT, + AXP152_IRQ_PEK_LONG, + AXP152_IRQ_TIMER, + AXP152_IRQ_PEK_RIS_EDGE, + AXP152_IRQ_PEK_FAL_EDGE, + AXP152_IRQ_GPIO3_INPUT, + AXP152_IRQ_GPIO2_INPUT, + AXP152_IRQ_GPIO1_INPUT, + AXP152_IRQ_GPIO0_INPUT, +}; + +enum { AXP20X_IRQ_ACIN_OVER_V = 1, AXP20X_IRQ_ACIN_PLUGIN, AXP20X_IRQ_ACIN_REMOVAL, -- 2.3.6 ^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <1435088503-20776-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 1/3] mfd: ax20x: Add axp152 support 2015-06-23 19:41 ` Hans de Goede @ 2015-06-24 12:21 ` Michal Suchanek -1 siblings, 0 replies; 22+ messages in thread From: Michal Suchanek @ 2015-06-24 12:21 UTC (permalink / raw) To: Hans de Goede Cc: Lee Jones, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi Hello, there is a typo in the subject. ax20x: -> axp20x: Thanks Michal ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 1/3] mfd: ax20x: Add axp152 support @ 2015-06-24 12:21 ` Michal Suchanek 0 siblings, 0 replies; 22+ messages in thread From: Michal Suchanek @ 2015-06-24 12:21 UTC (permalink / raw) To: linux-arm-kernel Hello, there is a typo in the subject. ax20x: -> axp20x: Thanks Michal ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/3] mfd: ax20x: Add axp152 support 2015-06-23 19:41 ` Hans de Goede @ 2015-06-25 10:11 ` Lee Jones -1 siblings, 0 replies; 22+ messages in thread From: Lee Jones @ 2015-06-25 10:11 UTC (permalink / raw) To: Hans de Goede Cc: Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek On Tue, 23 Jun 2015, Hans de Goede wrote: > From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > The axp152 is a stripped down version of the axp202 pmic with the battery > charging function removed as it is intended for top-set boxes. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 4 +- This should be in a separate patch. > drivers/mfd/axp20x.c | 92 ++++++++++++++++++++++++ > include/linux/mfd/axp20x.h | 61 +++++++++++++++- > 3 files changed, 155 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > index 753f14f..4181122 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -1,12 +1,14 @@ > AXP family PMIC device tree bindings > > The axp20x family current members : > +axp152 (X-Powers) > axp202 (X-Powers) > axp209 (X-Powers) > axp221 (X-Powers) > > Required properties: > -- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221" > +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > + "x-powers,axp221" > - reg: The I2C slave address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin For this patch, when it is separated out: Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index ca4a604..49bba28 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -30,12 +30,34 @@ > #define AXP20X_OFF 0x80 > > static const char * const axp20x_model_names[] = { > + "AXP152", > "AXP202", > "AXP209", > "AXP221", > "AXP288", > }; > > +static const struct regmap_range axp152_writeable_ranges[] = { > + regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), > + regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), > +}; > + > +static const struct regmap_range axp152_volatile_ranges[] = { > + regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), > + regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), > + regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), > +}; > + > +static const struct regmap_access_table axp152_writeable_table = { > + .yes_ranges = axp152_writeable_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), > +}; > + > +static const struct regmap_access_table axp152_volatile_table = { > + .yes_ranges = axp152_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), > +}; > + > static const struct regmap_range axp20x_writeable_ranges[] = { > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), > regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), > @@ -99,6 +121,20 @@ static const struct regmap_access_table axp288_volatile_table = { > .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), > }; > > +static struct resource axp152_pek_resources[] = { > + { > + .name = "PEK_DBR", > + .start = AXP152_IRQ_PEK_RIS_EDGE, > + .end = AXP152_IRQ_PEK_RIS_EDGE, > + .flags = IORESOURCE_IRQ, > + }, { > + .name = "PEK_DBF", > + .start = AXP152_IRQ_PEK_FAL_EDGE, > + .end = AXP152_IRQ_PEK_FAL_EDGE, > + .flags = IORESOURCE_IRQ, > + }, > +}; DEFINE_RES_*() After you've fixed this up, please add my: Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 1/3] mfd: ax20x: Add axp152 support @ 2015-06-25 10:11 ` Lee Jones 0 siblings, 0 replies; 22+ messages in thread From: Lee Jones @ 2015-06-25 10:11 UTC (permalink / raw) To: linux-arm-kernel On Tue, 23 Jun 2015, Hans de Goede wrote: > From: Michal Suchanek <hramrach@gmail.com> > > The axp152 is a stripped down version of the axp202 pmic with the battery > charging function removed as it is intended for top-set boxes. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 4 +- This should be in a separate patch. > drivers/mfd/axp20x.c | 92 ++++++++++++++++++++++++ > include/linux/mfd/axp20x.h | 61 +++++++++++++++- > 3 files changed, 155 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > index 753f14f..4181122 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -1,12 +1,14 @@ > AXP family PMIC device tree bindings > > The axp20x family current members : > +axp152 (X-Powers) > axp202 (X-Powers) > axp209 (X-Powers) > axp221 (X-Powers) > > Required properties: > -- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221" > +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > + "x-powers,axp221" > - reg: The I2C slave address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin For this patch, when it is separated out: Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index ca4a604..49bba28 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -30,12 +30,34 @@ > #define AXP20X_OFF 0x80 > > static const char * const axp20x_model_names[] = { > + "AXP152", > "AXP202", > "AXP209", > "AXP221", > "AXP288", > }; > > +static const struct regmap_range axp152_writeable_ranges[] = { > + regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), > + regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), > +}; > + > +static const struct regmap_range axp152_volatile_ranges[] = { > + regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), > + regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), > + regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), > +}; > + > +static const struct regmap_access_table axp152_writeable_table = { > + .yes_ranges = axp152_writeable_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges), > +}; > + > +static const struct regmap_access_table axp152_volatile_table = { > + .yes_ranges = axp152_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges), > +}; > + > static const struct regmap_range axp20x_writeable_ranges[] = { > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), > regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), > @@ -99,6 +121,20 @@ static const struct regmap_access_table axp288_volatile_table = { > .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), > }; > > +static struct resource axp152_pek_resources[] = { > + { > + .name = "PEK_DBR", > + .start = AXP152_IRQ_PEK_RIS_EDGE, > + .end = AXP152_IRQ_PEK_RIS_EDGE, > + .flags = IORESOURCE_IRQ, > + }, { > + .name = "PEK_DBF", > + .start = AXP152_IRQ_PEK_FAL_EDGE, > + .end = AXP152_IRQ_PEK_FAL_EDGE, > + .flags = IORESOURCE_IRQ, > + }, > +}; DEFINE_RES_*() After you've fixed this up, please add my: Acked-by: Lee Jones <lee.jones@linaro.org> -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-06-23 19:41 ` Hans de Goede @ 2015-06-23 19:41 ` Hans de Goede -1 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: Lee Jones, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek, Hans de Goede From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Add a dtsi file for the axp152 pmic, this mirrors the way things are handled for the axp202 pmic. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 arch/arm/boot/dts/axp152.dtsi diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi new file mode 100644 index 0000000..f90ad6c --- /dev/null +++ b/arch/arm/boot/dts/axp152.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&axp152 { + compatible = "x-powers,axp152"; + interrupt-controller; + #interrupt-cells = <1>; +}; -- 2.3.6 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-06-23 19:41 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: linux-arm-kernel From: Michal Suchanek <hramrach@gmail.com> Add a dtsi file for the axp152 pmic, this mirrors the way things are handled for the axp202 pmic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 arch/arm/boot/dts/axp152.dtsi diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi new file mode 100644 index 0000000..f90ad6c --- /dev/null +++ b/arch/arm/boot/dts/axp152.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&axp152 { + compatible = "x-powers,axp152"; + interrupt-controller; + #interrupt-cells = <1>; +}; -- 2.3.6 ^ permalink raw reply related [flat|nested] 22+ messages in thread
[parent not found: <1435088503-20776-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-06-23 19:41 ` Hans de Goede @ 2015-06-25 17:40 ` Maxime Ripard -1 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-06-25 17:40 UTC (permalink / raw) To: Hans de Goede Cc: Lee Jones, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek [-- Attachment #1: Type: text/plain, Size: 705 bytes --] Hi, On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Add a dtsi file for the axp152 pmic, this mirrors the way things are > handled for the axp202 pmic. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 arch/arm/boot/dts/axp152.dtsi Unfortunately, Mark expressed clearly that he didn't want such files. Sorry... Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-06-25 17:40 ` Maxime Ripard 0 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-06-25 17:40 UTC (permalink / raw) To: linux-arm-kernel Hi, On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > From: Michal Suchanek <hramrach@gmail.com> > > Add a dtsi file for the axp152 pmic, this mirrors the way things are > handled for the axp202 pmic. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 arch/arm/boot/dts/axp152.dtsi Unfortunately, Mark expressed clearly that he didn't want such files. Sorry... Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150625/777f18d7/attachment.sig> ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-06-25 17:40 ` Maxime Ripard @ 2015-06-26 8:22 ` Hans de Goede -1 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-26 8:22 UTC (permalink / raw) To: Maxime Ripard Cc: Lee Jones, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek Hi, On 25-06-15 19:40, Maxime Ripard wrote: > Hi, > > On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: >> From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> >> Add a dtsi file for the axp152 pmic, this mirrors the way things are >> handled for the axp202 pmic. >> >> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> >> --- >> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 49 insertions(+) >> create mode 100644 arch/arm/boot/dts/axp152.dtsi > > Unfortunately, Mark expressed clearly that he didn't want such files. That is not how I remember the discussion, he said that he did not consider them useful, we explained why we do consider them useful for the sunxi case and then things went quiet. And we do already have an axp209.dtsi, and I find having that useful for enabling the regulators on axp209 using boards. Ultimately it is your call, but I really think we should be consistent and add an axp152.dtsi to mirror how we do things with the axp209. Regards, Hans ^ permalink raw reply [flat|nested] 22+ messages in thread
* [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-06-26 8:22 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-26 8:22 UTC (permalink / raw) To: linux-arm-kernel Hi, On 25-06-15 19:40, Maxime Ripard wrote: > Hi, > > On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: >> From: Michal Suchanek <hramrach@gmail.com> >> >> Add a dtsi file for the axp152 pmic, this mirrors the way things are >> handled for the axp202 pmic. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 49 insertions(+) >> create mode 100644 arch/arm/boot/dts/axp152.dtsi > > Unfortunately, Mark expressed clearly that he didn't want such files. That is not how I remember the discussion, he said that he did not consider them useful, we explained why we do consider them useful for the sunxi case and then things went quiet. And we do already have an axp209.dtsi, and I find having that useful for enabling the regulators on axp209 using boards. Ultimately it is your call, but I really think we should be consistent and add an axp152.dtsi to mirror how we do things with the axp209. Regards, Hans ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <558D0BC2.10004-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-06-26 8:22 ` [linux-sunxi] " Hans de Goede @ 2015-07-06 8:57 ` Maxime Ripard -1 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-07-06 8:57 UTC (permalink / raw) To: Hans de Goede Cc: Lee Jones, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek [-- Attachment #1: Type: text/plain, Size: 1523 bytes --] Hi, On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: > Hi, > > On 25-06-15 19:40, Maxime Ripard wrote: > >Hi, > > > >On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > >>From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >> > >>Add a dtsi file for the axp152 pmic, this mirrors the way things are > >>handled for the axp202 pmic. > >> > >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > >>--- > >> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 49 insertions(+) > >> create mode 100644 arch/arm/boot/dts/axp152.dtsi > > > >Unfortunately, Mark expressed clearly that he didn't want such files. > > That is not how I remember the discussion, he said that he did not consider > them useful, we explained why we do consider them useful for the sunxi > case and then things went quiet. > > And we do already have an axp209.dtsi, and I find having that useful > for enabling the regulators on axp209 using boards. Hmmm, reading this discussion again, it indeed looks like I misremembered what he was saying. > Ultimately it is your call, but I really think we should be consistent > and add an axp152.dtsi to mirror how we do things with the axp209. Was there any other comments on this serie (and are you going to send a v2?) or should I apply this patch? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 22+ messages in thread
* [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-07-06 8:57 ` Maxime Ripard 0 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-07-06 8:57 UTC (permalink / raw) To: linux-arm-kernel Hi, On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: > Hi, > > On 25-06-15 19:40, Maxime Ripard wrote: > >Hi, > > > >On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > >>From: Michal Suchanek <hramrach@gmail.com> > >> > >>Add a dtsi file for the axp152 pmic, this mirrors the way things are > >>handled for the axp202 pmic. > >> > >>Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>--- > >> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 49 insertions(+) > >> create mode 100644 arch/arm/boot/dts/axp152.dtsi > > > >Unfortunately, Mark expressed clearly that he didn't want such files. > > That is not how I remember the discussion, he said that he did not consider > them useful, we explained why we do consider them useful for the sunxi > case and then things went quiet. > > And we do already have an axp209.dtsi, and I find having that useful > for enabling the regulators on axp209 using boards. Hmmm, reading this discussion again, it indeed looks like I misremembered what he was saying. > Ultimately it is your call, but I really think we should be consistent > and add an axp152.dtsi to mirror how we do things with the axp209. Was there any other comments on this serie (and are you going to send a v2?) or should I apply this patch? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150706/92db4319/attachment.sig> ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-07-06 8:57 ` [linux-sunxi] " Maxime Ripard @ 2015-07-06 12:12 ` Hans de Goede -1 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-07-06 12:12 UTC (permalink / raw) To: Maxime Ripard Cc: Lee Jones, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek Hi, On 06-07-15 10:57, Maxime Ripard wrote: > Hi, > > On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: >> Hi, >> >> On 25-06-15 19:40, Maxime Ripard wrote: >>> Hi, >>> >>> On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: >>>> From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >>>> >>>> Add a dtsi file for the axp152 pmic, this mirrors the way things are >>>> handled for the axp202 pmic. >>>> >>>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> >>>> --- >>>> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ >>>> 1 file changed, 49 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/axp152.dtsi >>> >>> Unfortunately, Mark expressed clearly that he didn't want such files. >> >> That is not how I remember the discussion, he said that he did not consider >> them useful, we explained why we do consider them useful for the sunxi >> case and then things went quiet. >> >> And we do already have an axp209.dtsi, and I find having that useful >> for enabling the regulators on axp209 using boards. > > Hmmm, reading this discussion again, it indeed looks like I > misremembered what he was saying. > >> Ultimately it is your call, but I really think we should be consistent >> and add an axp152.dtsi to mirror how we do things with the axp209. > > Was there any other comments on this serie (and are you going to send > a v2?) or should I apply this patch? There were some comments on the actual mfd bits of this series, and I will send a v2 for that sometime this week. The dts patches however are good to go, so please apply this one. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 22+ messages in thread
* [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-07-06 12:12 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-07-06 12:12 UTC (permalink / raw) To: linux-arm-kernel Hi, On 06-07-15 10:57, Maxime Ripard wrote: > Hi, > > On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: >> Hi, >> >> On 25-06-15 19:40, Maxime Ripard wrote: >>> Hi, >>> >>> On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: >>>> From: Michal Suchanek <hramrach@gmail.com> >>>> >>>> Add a dtsi file for the axp152 pmic, this mirrors the way things are >>>> handled for the axp202 pmic. >>>> >>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>>> --- >>>> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ >>>> 1 file changed, 49 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/axp152.dtsi >>> >>> Unfortunately, Mark expressed clearly that he didn't want such files. >> >> That is not how I remember the discussion, he said that he did not consider >> them useful, we explained why we do consider them useful for the sunxi >> case and then things went quiet. >> >> And we do already have an axp209.dtsi, and I find having that useful >> for enabling the regulators on axp209 using boards. > > Hmmm, reading this discussion again, it indeed looks like I > misremembered what he was saying. > >> Ultimately it is your call, but I really think we should be consistent >> and add an axp152.dtsi to mirror how we do things with the axp209. > > Was there any other comments on this serie (and are you going to send > a v2?) or should I apply this patch? There were some comments on the actual mfd bits of this series, and I will send a v2 for that sometime this week. The dts patches however are good to go, so please apply this one. Regards, Hans ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <559A70B6.3010101-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-07-06 12:12 ` Hans de Goede @ 2015-07-09 8:10 ` Maxime Ripard -1 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-07-09 8:10 UTC (permalink / raw) To: Hans de Goede Cc: Lee Jones, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek [-- Attachment #1: Type: text/plain, Size: 1933 bytes --] On Mon, Jul 06, 2015 at 02:12:38PM +0200, Hans de Goede wrote: > Hi, > > On 06-07-15 10:57, Maxime Ripard wrote: > >Hi, > > > >On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: > >>Hi, > >> > >>On 25-06-15 19:40, Maxime Ripard wrote: > >>>Hi, > >>> > >>>On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > >>>>From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >>>> > >>>>Add a dtsi file for the axp152 pmic, this mirrors the way things are > >>>>handled for the axp202 pmic. > >>>> > >>>>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > >>>>--- > >>>> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > >>>> 1 file changed, 49 insertions(+) > >>>> create mode 100644 arch/arm/boot/dts/axp152.dtsi > >>> > >>>Unfortunately, Mark expressed clearly that he didn't want such files. > >> > >>That is not how I remember the discussion, he said that he did not consider > >>them useful, we explained why we do consider them useful for the sunxi > >>case and then things went quiet. > >> > >>And we do already have an axp209.dtsi, and I find having that useful > >>for enabling the regulators on axp209 using boards. > > > >Hmmm, reading this discussion again, it indeed looks like I > >misremembered what he was saying. > > > >>Ultimately it is your call, but I really think we should be consistent > >>and add an axp152.dtsi to mirror how we do things with the axp209. > > > >Was there any other comments on this serie (and are you going to send > >a v2?) or should I apply this patch? > > There were some comments on the actual mfd bits of this series, and > I will send a v2 for that sometime this week. The dts patches however > are good to go, so please apply this one. Applied 2 and 3 then. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 22+ messages in thread
* [linux-sunxi] Re: [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic @ 2015-07-09 8:10 ` Maxime Ripard 0 siblings, 0 replies; 22+ messages in thread From: Maxime Ripard @ 2015-07-09 8:10 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jul 06, 2015 at 02:12:38PM +0200, Hans de Goede wrote: > Hi, > > On 06-07-15 10:57, Maxime Ripard wrote: > >Hi, > > > >On Fri, Jun 26, 2015 at 10:22:26AM +0200, Hans de Goede wrote: > >>Hi, > >> > >>On 25-06-15 19:40, Maxime Ripard wrote: > >>>Hi, > >>> > >>>On Tue, Jun 23, 2015 at 09:41:42PM +0200, Hans de Goede wrote: > >>>>From: Michal Suchanek <hramrach@gmail.com> > >>>> > >>>>Add a dtsi file for the axp152 pmic, this mirrors the way things are > >>>>handled for the axp202 pmic. > >>>> > >>>>Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>>>--- > >>>> arch/arm/boot/dts/axp152.dtsi | 49 +++++++++++++++++++++++++++++++++++++++++++ > >>>> 1 file changed, 49 insertions(+) > >>>> create mode 100644 arch/arm/boot/dts/axp152.dtsi > >>> > >>>Unfortunately, Mark expressed clearly that he didn't want such files. > >> > >>That is not how I remember the discussion, he said that he did not consider > >>them useful, we explained why we do consider them useful for the sunxi > >>case and then things went quiet. > >> > >>And we do already have an axp209.dtsi, and I find having that useful > >>for enabling the regulators on axp209 using boards. > > > >Hmmm, reading this discussion again, it indeed looks like I > >misremembered what he was saying. > > > >>Ultimately it is your call, but I really think we should be consistent > >>and add an axp152.dtsi to mirror how we do things with the axp209. > > > >Was there any other comments on this serie (and are you going to send > >a v2?) or should I apply this patch? > > There were some comments on the actual mfd bits of this series, and > I will send a v2 for that sometime this week. The dts patches however > are good to go, so please apply this one. Applied 2 and 3 then. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150709/8933a5a6/attachment-0001.sig> ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 3/3] ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic 2015-06-23 19:41 ` Hans de Goede @ 2015-06-23 19:41 ` Hans de Goede -1 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: Lee Jones, Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Michal Suchanek, Hans de Goede From: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Add a node for axp152 pmic used on the A10s-OLinuxIno SBC. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index a7e19e4..7b26e17 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -96,8 +96,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp152: pmic@30 { + reg = <0x30>; + interrupts = <0>; + }; }; +#include "axp152.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; -- 2.3.6 ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH 3/3] ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic @ 2015-06-23 19:41 ` Hans de Goede 0 siblings, 0 replies; 22+ messages in thread From: Hans de Goede @ 2015-06-23 19:41 UTC (permalink / raw) To: linux-arm-kernel From: Michal Suchanek <hramrach@gmail.com> Add a node for axp152 pmic used on the A10s-OLinuxIno SBC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index a7e19e4..7b26e17 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -96,8 +96,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp152: pmic at 30 { + reg = <0x30>; + interrupts = <0>; + }; }; +#include "axp152.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; -- 2.3.6 ^ permalink raw reply related [flat|nested] 22+ messages in thread
end of thread, other threads:[~2015-07-09 8:10 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-23 19:41 [PATCH 0/3] mfd: ax20x: Add axp152 support Hans de Goede
2015-06-23 19:41 ` Hans de Goede
[not found] ` <1435088503-20776-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-23 19:41 ` [PATCH 1/3] " Hans de Goede
2015-06-23 19:41 ` Hans de Goede
[not found] ` <1435088503-20776-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-24 12:21 ` Michal Suchanek
2015-06-24 12:21 ` Michal Suchanek
2015-06-25 10:11 ` Lee Jones
2015-06-25 10:11 ` Lee Jones
2015-06-23 19:41 ` [PATCH 2/3] ARM: dts: axp152: Add a dtsi file for the axp152 pmic Hans de Goede
2015-06-23 19:41 ` Hans de Goede
[not found] ` <1435088503-20776-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-06-25 17:40 ` Maxime Ripard
2015-06-25 17:40 ` Maxime Ripard
2015-06-26 8:22 ` Hans de Goede
2015-06-26 8:22 ` [linux-sunxi] " Hans de Goede
[not found] ` <558D0BC2.10004-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-07-06 8:57 ` Maxime Ripard
2015-07-06 8:57 ` [linux-sunxi] " Maxime Ripard
2015-07-06 12:12 ` Hans de Goede
2015-07-06 12:12 ` Hans de Goede
[not found] ` <559A70B6.3010101-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-07-09 8:10 ` Maxime Ripard
2015-07-09 8:10 ` [linux-sunxi] " Maxime Ripard
2015-06-23 19:41 ` [PATCH 3/3] ARM: dts: A10s-OLinuxIno: Add a node for " Hans de Goede
2015-06-23 19:41 ` Hans de Goede
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.