From: Stephen Boyd <sboyd@codeaurora.org> To: Andy Gross <agross@codeaurora.org> Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Bjorn Andersson <bjorn.andersson@sonymobile.com> Subject: [PATCH 3/3] soc: qcom: smd: Handle big endian CPUs Date: Mon, 31 Aug 2015 18:39:54 -0700 [thread overview] Message-ID: <1441071594-15941-4-git-send-email-sboyd@codeaurora.org> (raw) In-Reply-To: <1441071594-15941-1-git-send-email-sboyd@codeaurora.org> The smd structures are always in little endian, but the smd driver is not capable of being used on big endian CPUs. Annotate the little endian data members and update the code to do the proper byte swapping. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/soc/qcom/smd.c | 173 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 112 insertions(+), 61 deletions(-) diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c index 91b7f5668962..53642a874339 100644 --- a/drivers/soc/qcom/smd.c +++ b/drivers/soc/qcom/smd.c @@ -212,7 +212,7 @@ struct qcom_smd { * Format of the smd_info smem items, for byte aligned channels. */ struct smd_channel_info { - u32 state; + __le32 state; u8 fDSR; u8 fCTS; u8 fCD; @@ -221,8 +221,8 @@ struct smd_channel_info { u8 fTAIL; u8 fSTATE; u8 fBLOCKREADINTR; - u32 tail; - u32 head; + __le32 tail; + __le32 head; }; struct smd_full_channel_info { @@ -234,17 +234,17 @@ struct smd_full_channel_info { * Format of the smd_info smem items, for word aligned channels. */ struct smd_channel_info_word { - u32 state; - u32 fDSR; - u32 fCTS; - u32 fCD; - u32 fRI; - u32 fHEAD; - u32 fTAIL; - u32 fSTATE; - u32 fBLOCKREADINTR; - u32 tail; - u32 head; + __le32 state; + __le32 fDSR; + __le32 fCTS; + __le32 fCD; + __le32 fRI; + __le32 fHEAD; + __le32 fTAIL; + __le32 fSTATE; + __le32 fBLOCKREADINTR; + __le32 tail; + __le32 head; }; struct smd_full_channel_info_word { @@ -252,25 +252,73 @@ struct smd_full_channel_info_word { struct smd_channel_info_word rx; }; -#define GET_RX_CHANNEL_INFO(channel, param) \ - (channel->info_word ? \ - channel->info_word->rx.param : \ - channel->info->rx.param) - -#define SET_RX_CHANNEL_INFO(channel, param, value) \ - (channel->info_word ? \ - (channel->info_word->rx.param = value) : \ - (channel->info->rx.param = value)) - -#define GET_TX_CHANNEL_INFO(channel, param) \ - (channel->info_word ? \ - channel->info_word->tx.param : \ - channel->info->tx.param) - -#define SET_TX_CHANNEL_INFO(channel, param, value) \ - (channel->info_word ? \ - (channel->info_word->tx.param = value) : \ - (channel->info->tx.param = value)) +#define GET_RX_CHANNEL_INFO8(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \ + channel->info_word ? \ + le32_to_cpu(channel->info_word->rx.param) : \ + channel->info->rx.param; \ + }) + +#define GET_RX_CHANNEL_INFO(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \ + le32_to_cpu(channel->info_word ? \ + channel->info_word->rx.param : \ + channel->info->rx.param); \ + }) + +#define SET_RX_CHANNEL_INFO8(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \ + if (channel->info_word) \ + channel->info_word->rx.param = cpu_to_le32(value); \ + else \ + channel->info->rx.param = value; \ + }) + +#define SET_RX_CHANNEL_INFO(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \ + if (channel->info_word) \ + channel->info_word->rx.param = cpu_to_le32(value); \ + else \ + channel->info->rx.param = cpu_to_le32(value); \ + }) + +#define GET_TX_CHANNEL_INFO8(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \ + channel->info_word ? \ + le32_to_cpu(channel->info_word->tx.param) : \ + channel->info->tx.param; \ + }) + +#define GET_TX_CHANNEL_INFO(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \ + le32_to_cpu(channel->info_word ? \ + channel->info_word->tx.param : \ + channel->info->tx.param); \ + }) + +#define SET_TX_CHANNEL_INFO8(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \ + if (channel->info_word) \ + channel->info_word->tx.param = cpu_to_le32(value); \ + else \ + channel->info->tx.param = value; \ + }) + +#define SET_TX_CHANNEL_INFO(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \ + if (channel->info_word) \ + channel->info_word->tx.param = cpu_to_le32(value); \ + else \ + channel->info->tx.param = cpu_to_le32(value); \ + }) /** * struct qcom_smd_alloc_entry - channel allocation entry @@ -281,9 +329,9 @@ struct smd_full_channel_info_word { */ struct qcom_smd_alloc_entry { u8 name[20]; - u32 cid; - u32 flags; - u32 ref_count; + __le32 cid; + __le32 flags; + __le32 ref_count; } __packed; #define SMD_CHANNEL_FLAGS_EDGE_MASK 0xff @@ -312,14 +360,14 @@ static void qcom_smd_signal_channel(struct qcom_smd_channel *channel) static void qcom_smd_channel_reset(struct qcom_smd_channel *channel) { SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED); - SET_TX_CHANNEL_INFO(channel, fDSR, 0); - SET_TX_CHANNEL_INFO(channel, fCTS, 0); - SET_TX_CHANNEL_INFO(channel, fCD, 0); - SET_TX_CHANNEL_INFO(channel, fRI, 0); - SET_TX_CHANNEL_INFO(channel, fHEAD, 0); - SET_TX_CHANNEL_INFO(channel, fTAIL, 0); - SET_TX_CHANNEL_INFO(channel, fSTATE, 1); - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO8(channel, fDSR, 0); + SET_TX_CHANNEL_INFO8(channel, fCTS, 0); + SET_TX_CHANNEL_INFO8(channel, fCD, 0); + SET_TX_CHANNEL_INFO8(channel, fRI, 0); + SET_TX_CHANNEL_INFO8(channel, fHEAD, 0); + SET_TX_CHANNEL_INFO8(channel, fTAIL, 0); + SET_TX_CHANNEL_INFO8(channel, fSTATE, 1); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 0); SET_TX_CHANNEL_INFO(channel, head, 0); SET_TX_CHANNEL_INFO(channel, tail, 0); @@ -357,12 +405,12 @@ static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel, dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state); - SET_TX_CHANNEL_INFO(channel, fDSR, is_open); - SET_TX_CHANNEL_INFO(channel, fCTS, is_open); - SET_TX_CHANNEL_INFO(channel, fCD, is_open); + SET_TX_CHANNEL_INFO8(channel, fDSR, is_open); + SET_TX_CHANNEL_INFO8(channel, fCTS, is_open); + SET_TX_CHANNEL_INFO8(channel, fCD, is_open); SET_TX_CHANNEL_INFO(channel, state, state); - SET_TX_CHANNEL_INFO(channel, fSTATE, 1); + SET_TX_CHANNEL_INFO8(channel, fSTATE, 1); channel->state = state; qcom_smd_signal_channel(channel); @@ -504,10 +552,10 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) need_state_scan = true; } /* Indicate that we have seen any state change */ - SET_RX_CHANNEL_INFO(channel, fSTATE, 0); + SET_RX_CHANNEL_INFO8(channel, fSTATE, 0); /* Signal waiting qcom_smd_send() about the interrupt */ - if (!GET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR)) + if (!GET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR)) wake_up_interruptible(&channel->fblockread_event); /* Don't consume any data until we've opened the channel */ @@ -515,7 +563,7 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) goto out; /* Indicate that we've seen the new data */ - SET_RX_CHANNEL_INFO(channel, fHEAD, 0); + SET_RX_CHANNEL_INFO8(channel, fHEAD, 0); /* Consume data */ for (;;) { @@ -535,10 +583,10 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) } /* Indicate that we have seen and updated tail */ - SET_RX_CHANNEL_INFO(channel, fTAIL, 1); + SET_RX_CHANNEL_INFO8(channel, fTAIL, 1); /* Signal the remote that we've consumed the data (if requested) */ - if (!GET_RX_CHANNEL_INFO(channel, fBLOCKREADINTR)) { + if (!GET_RX_CHANNEL_INFO8(channel, fBLOCKREADINTR)) { /* Ensure ordering of channel info updates */ wmb(); @@ -685,7 +733,7 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) goto out; } - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 1); ret = wait_event_interruptible(channel->fblockread_event, qcom_smd_get_tx_avail(channel) >= tlen || @@ -693,15 +741,15 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) if (ret) goto out; - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 0); } - SET_TX_CHANNEL_INFO(channel, fTAIL, 0); + SET_TX_CHANNEL_INFO8(channel, fTAIL, 0); qcom_smd_write_fifo(channel, hdr, sizeof(hdr)); qcom_smd_write_fifo(channel, data, len); - SET_TX_CHANNEL_INFO(channel, fHEAD, 1); + SET_TX_CHANNEL_INFO8(channel, fHEAD, 1); /* Ensure ordering of channel info updates */ wmb(); @@ -1043,6 +1091,7 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) int ret; int tbl; int i; + u32 eflags, cid; for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) { ret = qcom_smem_get(edge->remote_pid, @@ -1054,6 +1103,7 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) { entry = &alloc_tbl[i]; + eflags = le32_to_cpu(entry->flags); if (test_bit(i, edge->allocated[tbl])) continue; @@ -1063,14 +1113,15 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) if (!entry->name[0]) continue; - if (!(entry->flags & SMD_CHANNEL_FLAGS_PACKET)) + if (!(eflags & SMD_CHANNEL_FLAGS_PACKET)) continue; - if ((entry->flags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id) + if ((eflags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id) continue; - info_id = smem_items[tbl].info_base_id + entry->cid; - fifo_id = smem_items[tbl].fifo_base_id + entry->cid; + cid = le32_to_cpu(entry->cid); + info_id = smem_items[tbl].info_base_id + cid; + fifo_id = smem_items[tbl].fifo_base_id + cid; channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name); if (IS_ERR(channel)) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] soc: qcom: smd: Handle big endian CPUs Date: Mon, 31 Aug 2015 18:39:54 -0700 [thread overview] Message-ID: <1441071594-15941-4-git-send-email-sboyd@codeaurora.org> (raw) In-Reply-To: <1441071594-15941-1-git-send-email-sboyd@codeaurora.org> The smd structures are always in little endian, but the smd driver is not capable of being used on big endian CPUs. Annotate the little endian data members and update the code to do the proper byte swapping. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/soc/qcom/smd.c | 173 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 112 insertions(+), 61 deletions(-) diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c index 91b7f5668962..53642a874339 100644 --- a/drivers/soc/qcom/smd.c +++ b/drivers/soc/qcom/smd.c @@ -212,7 +212,7 @@ struct qcom_smd { * Format of the smd_info smem items, for byte aligned channels. */ struct smd_channel_info { - u32 state; + __le32 state; u8 fDSR; u8 fCTS; u8 fCD; @@ -221,8 +221,8 @@ struct smd_channel_info { u8 fTAIL; u8 fSTATE; u8 fBLOCKREADINTR; - u32 tail; - u32 head; + __le32 tail; + __le32 head; }; struct smd_full_channel_info { @@ -234,17 +234,17 @@ struct smd_full_channel_info { * Format of the smd_info smem items, for word aligned channels. */ struct smd_channel_info_word { - u32 state; - u32 fDSR; - u32 fCTS; - u32 fCD; - u32 fRI; - u32 fHEAD; - u32 fTAIL; - u32 fSTATE; - u32 fBLOCKREADINTR; - u32 tail; - u32 head; + __le32 state; + __le32 fDSR; + __le32 fCTS; + __le32 fCD; + __le32 fRI; + __le32 fHEAD; + __le32 fTAIL; + __le32 fSTATE; + __le32 fBLOCKREADINTR; + __le32 tail; + __le32 head; }; struct smd_full_channel_info_word { @@ -252,25 +252,73 @@ struct smd_full_channel_info_word { struct smd_channel_info_word rx; }; -#define GET_RX_CHANNEL_INFO(channel, param) \ - (channel->info_word ? \ - channel->info_word->rx.param : \ - channel->info->rx.param) - -#define SET_RX_CHANNEL_INFO(channel, param, value) \ - (channel->info_word ? \ - (channel->info_word->rx.param = value) : \ - (channel->info->rx.param = value)) - -#define GET_TX_CHANNEL_INFO(channel, param) \ - (channel->info_word ? \ - channel->info_word->tx.param : \ - channel->info->tx.param) - -#define SET_TX_CHANNEL_INFO(channel, param, value) \ - (channel->info_word ? \ - (channel->info_word->tx.param = value) : \ - (channel->info->tx.param = value)) +#define GET_RX_CHANNEL_INFO8(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \ + channel->info_word ? \ + le32_to_cpu(channel->info_word->rx.param) : \ + channel->info->rx.param; \ + }) + +#define GET_RX_CHANNEL_INFO(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \ + le32_to_cpu(channel->info_word ? \ + channel->info_word->rx.param : \ + channel->info->rx.param); \ + }) + +#define SET_RX_CHANNEL_INFO8(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \ + if (channel->info_word) \ + channel->info_word->rx.param = cpu_to_le32(value); \ + else \ + channel->info->rx.param = value; \ + }) + +#define SET_RX_CHANNEL_INFO(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \ + if (channel->info_word) \ + channel->info_word->rx.param = cpu_to_le32(value); \ + else \ + channel->info->rx.param = cpu_to_le32(value); \ + }) + +#define GET_TX_CHANNEL_INFO8(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \ + channel->info_word ? \ + le32_to_cpu(channel->info_word->tx.param) : \ + channel->info->tx.param; \ + }) + +#define GET_TX_CHANNEL_INFO(channel, param) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \ + le32_to_cpu(channel->info_word ? \ + channel->info_word->tx.param : \ + channel->info->tx.param); \ + }) + +#define SET_TX_CHANNEL_INFO8(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \ + if (channel->info_word) \ + channel->info_word->tx.param = cpu_to_le32(value); \ + else \ + channel->info->tx.param = value; \ + }) + +#define SET_TX_CHANNEL_INFO(channel, param, value) \ + ({ \ + BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \ + if (channel->info_word) \ + channel->info_word->tx.param = cpu_to_le32(value); \ + else \ + channel->info->tx.param = cpu_to_le32(value); \ + }) /** * struct qcom_smd_alloc_entry - channel allocation entry @@ -281,9 +329,9 @@ struct smd_full_channel_info_word { */ struct qcom_smd_alloc_entry { u8 name[20]; - u32 cid; - u32 flags; - u32 ref_count; + __le32 cid; + __le32 flags; + __le32 ref_count; } __packed; #define SMD_CHANNEL_FLAGS_EDGE_MASK 0xff @@ -312,14 +360,14 @@ static void qcom_smd_signal_channel(struct qcom_smd_channel *channel) static void qcom_smd_channel_reset(struct qcom_smd_channel *channel) { SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED); - SET_TX_CHANNEL_INFO(channel, fDSR, 0); - SET_TX_CHANNEL_INFO(channel, fCTS, 0); - SET_TX_CHANNEL_INFO(channel, fCD, 0); - SET_TX_CHANNEL_INFO(channel, fRI, 0); - SET_TX_CHANNEL_INFO(channel, fHEAD, 0); - SET_TX_CHANNEL_INFO(channel, fTAIL, 0); - SET_TX_CHANNEL_INFO(channel, fSTATE, 1); - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO8(channel, fDSR, 0); + SET_TX_CHANNEL_INFO8(channel, fCTS, 0); + SET_TX_CHANNEL_INFO8(channel, fCD, 0); + SET_TX_CHANNEL_INFO8(channel, fRI, 0); + SET_TX_CHANNEL_INFO8(channel, fHEAD, 0); + SET_TX_CHANNEL_INFO8(channel, fTAIL, 0); + SET_TX_CHANNEL_INFO8(channel, fSTATE, 1); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 0); SET_TX_CHANNEL_INFO(channel, head, 0); SET_TX_CHANNEL_INFO(channel, tail, 0); @@ -357,12 +405,12 @@ static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel, dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state); - SET_TX_CHANNEL_INFO(channel, fDSR, is_open); - SET_TX_CHANNEL_INFO(channel, fCTS, is_open); - SET_TX_CHANNEL_INFO(channel, fCD, is_open); + SET_TX_CHANNEL_INFO8(channel, fDSR, is_open); + SET_TX_CHANNEL_INFO8(channel, fCTS, is_open); + SET_TX_CHANNEL_INFO8(channel, fCD, is_open); SET_TX_CHANNEL_INFO(channel, state, state); - SET_TX_CHANNEL_INFO(channel, fSTATE, 1); + SET_TX_CHANNEL_INFO8(channel, fSTATE, 1); channel->state = state; qcom_smd_signal_channel(channel); @@ -504,10 +552,10 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) need_state_scan = true; } /* Indicate that we have seen any state change */ - SET_RX_CHANNEL_INFO(channel, fSTATE, 0); + SET_RX_CHANNEL_INFO8(channel, fSTATE, 0); /* Signal waiting qcom_smd_send() about the interrupt */ - if (!GET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR)) + if (!GET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR)) wake_up_interruptible(&channel->fblockread_event); /* Don't consume any data until we've opened the channel */ @@ -515,7 +563,7 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) goto out; /* Indicate that we've seen the new data */ - SET_RX_CHANNEL_INFO(channel, fHEAD, 0); + SET_RX_CHANNEL_INFO8(channel, fHEAD, 0); /* Consume data */ for (;;) { @@ -535,10 +583,10 @@ static bool qcom_smd_channel_intr(struct qcom_smd_channel *channel) } /* Indicate that we have seen and updated tail */ - SET_RX_CHANNEL_INFO(channel, fTAIL, 1); + SET_RX_CHANNEL_INFO8(channel, fTAIL, 1); /* Signal the remote that we've consumed the data (if requested) */ - if (!GET_RX_CHANNEL_INFO(channel, fBLOCKREADINTR)) { + if (!GET_RX_CHANNEL_INFO8(channel, fBLOCKREADINTR)) { /* Ensure ordering of channel info updates */ wmb(); @@ -685,7 +733,7 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) goto out; } - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 1); ret = wait_event_interruptible(channel->fblockread_event, qcom_smd_get_tx_avail(channel) >= tlen || @@ -693,15 +741,15 @@ int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len) if (ret) goto out; - SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0); + SET_TX_CHANNEL_INFO8(channel, fBLOCKREADINTR, 0); } - SET_TX_CHANNEL_INFO(channel, fTAIL, 0); + SET_TX_CHANNEL_INFO8(channel, fTAIL, 0); qcom_smd_write_fifo(channel, hdr, sizeof(hdr)); qcom_smd_write_fifo(channel, data, len); - SET_TX_CHANNEL_INFO(channel, fHEAD, 1); + SET_TX_CHANNEL_INFO8(channel, fHEAD, 1); /* Ensure ordering of channel info updates */ wmb(); @@ -1043,6 +1091,7 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) int ret; int tbl; int i; + u32 eflags, cid; for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) { ret = qcom_smem_get(edge->remote_pid, @@ -1054,6 +1103,7 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) { entry = &alloc_tbl[i]; + eflags = le32_to_cpu(entry->flags); if (test_bit(i, edge->allocated[tbl])) continue; @@ -1063,14 +1113,15 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge) if (!entry->name[0]) continue; - if (!(entry->flags & SMD_CHANNEL_FLAGS_PACKET)) + if (!(eflags & SMD_CHANNEL_FLAGS_PACKET)) continue; - if ((entry->flags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id) + if ((eflags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id) continue; - info_id = smem_items[tbl].info_base_id + entry->cid; - fifo_id = smem_items[tbl].fifo_base_id + entry->cid; + cid = le32_to_cpu(entry->cid); + info_id = smem_items[tbl].info_base_id + cid; + fifo_id = smem_items[tbl].fifo_base_id + cid; channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name); if (IS_ERR(channel)) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-09-01 1:39 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-09-01 1:39 [PATCH 0/3] qcom smd big endian support Stephen Boyd 2015-09-01 1:39 ` Stephen Boyd 2015-09-01 1:39 ` [PATCH 1/3] soc: qcom: smd: Represent channel layout in structures Stephen Boyd 2015-09-01 1:39 ` Stephen Boyd 2015-09-01 1:39 ` Stephen Boyd 2015-09-01 4:55 ` Bjorn Andersson 2015-09-01 4:55 ` Bjorn Andersson 2015-09-01 4:55 ` Bjorn Andersson 2015-09-01 17:51 ` Stephen Boyd 2015-09-01 17:51 ` Stephen Boyd 2015-09-01 17:51 ` Stephen Boyd 2015-09-01 1:39 ` [PATCH 2/3] soc: qcom: smd: Use __iowrite32_copy() instead of open-coding it Stephen Boyd 2015-09-01 1:39 ` Stephen Boyd 2015-09-01 4:59 ` Bjorn Andersson 2015-09-01 4:59 ` Bjorn Andersson 2015-09-01 4:59 ` Bjorn Andersson 2015-09-01 18:03 ` Stephen Boyd 2015-09-01 18:03 ` Stephen Boyd 2015-09-01 18:03 ` Stephen Boyd 2015-09-01 20:30 ` Stephen Boyd 2015-09-01 20:30 ` Stephen Boyd 2015-09-01 20:30 ` Stephen Boyd 2015-09-01 1:39 ` Stephen Boyd [this message] 2015-09-01 1:39 ` [PATCH 3/3] soc: qcom: smd: Handle big endian CPUs Stephen Boyd 2015-09-01 5:06 ` Bjorn Andersson 2015-09-01 5:06 ` Bjorn Andersson 2015-09-01 5:06 ` Bjorn Andersson 2015-09-01 18:04 ` Stephen Boyd 2015-09-01 18:04 ` Stephen Boyd 2015-09-01 18:04 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1441071594-15941-4-git-send-email-sboyd@codeaurora.org \ --to=sboyd@codeaurora.org \ --cc=agross@codeaurora.org \ --cc=bjorn.andersson@sonymobile.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.