From: Milo Kim <milo.kim@ti.com> To: <devicetree@vger.kernel.org>, <lee.jones@linaro.org>, <linux-kernel@vger.kernel.org> Cc: Milo Kim <milo.kim@ti.com>, Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>, <lm-sensors@lm-sensors.org> Subject: [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information Date: Mon, 2 Nov 2015 14:24:22 +0900 [thread overview] Message-ID: <1446441875-1256-4-git-send-email-milo.kim@ti.com> (raw) In-Reply-To: <1446441875-1256-1-git-send-email-milo.kim@ti.com> Hardware fault monitoring driver is used in LM3633 and LM3697 device. Just 'compatible' property is required to describe the driver. Cc: devicetree@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> --- Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt diff --git a/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt new file mode 100644 index 0000000..99cb241 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt @@ -0,0 +1,12 @@ +TI LMU Hardware Monotoring device tree bindings + +LMU HWON driver monitors hardware fault situation of LMU devices, +LM3633 and LM3697. + +Required properties: + - compatible: Should be one of lists below. + "ti,lm3633-hwmon" + "ti,lm3697-hwmon" + +Examples: Please refer to ti-lmu dt-bindings. + Documentation/devicetree/bindings/mfd/ti-lmu.txt -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Milo Kim <milo.kim@ti.com> To: devicetree@vger.kernel.org, lee.jones@linaro.org, linux-kernel@vger.kernel.org Cc: Milo Kim <milo.kim@ti.com>, Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>, lm-sensors@lm-sensors.org Subject: [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information Date: Mon, 2 Nov 2015 14:24:22 +0900 [thread overview] Message-ID: <1446441875-1256-4-git-send-email-milo.kim@ti.com> (raw) In-Reply-To: <1446441875-1256-1-git-send-email-milo.kim@ti.com> Hardware fault monitoring driver is used in LM3633 and LM3697 device. Just 'compatible' property is required to describe the driver. Cc: devicetree@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> --- Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt diff --git a/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt new file mode 100644 index 0000000..99cb241 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti-lmu-hwmon.txt @@ -0,0 +1,12 @@ +TI LMU Hardware Monotoring device tree bindings + +LMU HWON driver monitors hardware fault situation of LMU devices, +LM3633 and LM3697. + +Required properties: + - compatible: Should be one of lists below. + "ti,lm3633-hwmon" + "ti,lm3697-hwmon" + +Examples: Please refer to ti-lmu dt-bindings. + Documentation/devicetree/bindings/mfd/ti-lmu.txt -- 1.9.1
next prev parent reply other threads:[~2015-11-02 5:26 UTC|newest] Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-02 5:24 [PATCH RESEND 00/16] Support TI LMU devices Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 01/16] Documentation: dt-bindings: mfd: add TI LMU device binding information Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-06 2:00 ` Rob Herring 2015-11-11 9:49 ` Lee Jones 2015-11-12 0:05 ` Kim, Milo 2015-11-12 0:05 ` Kim, Milo 2015-11-02 5:24 ` [PATCH RESEND 02/16] Documentation: dt-bindings: backlight: add TI LMU backlight " Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 15:02 ` Rob Herring 2015-11-03 7:13 ` Kim, Milo 2015-11-03 15:32 ` Rob Herring 2015-11-02 5:24 ` Milo Kim [this message] 2015-11-02 5:24 ` [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON " Milo Kim 2015-11-06 1:57 ` Rob Herring 2015-11-06 1:57 ` Rob Herring 2015-11-06 3:48 ` Kim, Milo 2015-11-06 3:48 ` Kim, Milo [not found] ` <1446441875-1256-1-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org> 2015-11-02 5:24 ` [PATCH RESEND 04/16] Documentation: dt-bindings: leds: add LM3633 LED " Milo Kim 2015-11-02 5:24 ` Milo Kim [not found] ` <1446441875-1256-5-git-send-email-milo.kim-l0cyMroinI0@public.gmane.org> 2015-11-03 16:15 ` Jacek Anaszewski 2015-11-03 16:15 ` Jacek Anaszewski 2015-11-10 7:01 ` Kim, Milo 2015-11-10 7:01 ` Kim, Milo 2015-11-02 5:24 ` [PATCH RESEND 05/16] Documentation: dt-bindings: regulator: add LM363x regulator " Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 06/16] mfd: add TI LMU driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-23 10:30 ` Lee Jones 2015-11-24 2:35 ` Kim, Milo 2015-11-24 2:35 ` Kim, Milo 2015-11-24 6:39 ` Kim, Milo 2015-11-24 6:39 ` Kim, Milo 2015-11-24 8:18 ` Lee Jones 2015-11-25 8:10 ` Kim, Milo 2015-11-25 8:10 ` Kim, Milo [not found] ` <56556D01.9070804-l0cyMroinI0@public.gmane.org> 2015-11-25 8:15 ` Lee Jones 2015-11-25 8:15 ` Lee Jones 2015-11-02 5:24 ` [PATCH RESEND 07/16] backlight: add TI LMU backlight common driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 08/16] backlight: ti-lmu-backlight: add LM3532 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:37 ` kbuild test robot 2015-11-02 5:37 ` kbuild test robot 2015-11-02 7:33 ` Kim, Milo 2015-11-02 7:33 ` Kim, Milo 2015-11-02 5:24 ` [PATCH RESEND 09/16] backlight: ti-lmu-backlight: add LM3631 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 10/16] backlight: ti-lmu-backlight: add LM3632 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 11/16] backlight: ti-lmu-backlight: add LM3633 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 12/16] backlight: ti-lmu-backlight: add LM3695 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 13/16] backlight: ti-lmu-backlight: add LM3697 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 5:24 ` [PATCH RESEND 14/16] hwmon: add TI LMU hardware fault monitoring driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 14:27 ` Guenter Roeck 2015-11-02 14:27 ` Guenter Roeck 2015-11-03 7:01 ` Kim, Milo 2015-11-03 7:01 ` Kim, Milo 2015-11-02 5:24 ` [PATCH RESEND 15/16] leds: add LM3633 driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-03 16:15 ` Jacek Anaszewski [not found] ` <5638DD99.9070502-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2015-11-10 7:38 ` Kim, Milo 2015-11-10 7:38 ` Kim, Milo 2015-11-10 13:44 ` Jacek Anaszewski [not found] ` <5641F4D3.7000800-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2015-11-11 2:16 ` Kim, Milo 2015-11-11 2:16 ` Kim, Milo 2015-11-12 9:04 ` Jacek Anaszewski 2015-11-20 9:22 ` Jacek Anaszewski 2015-11-22 23:40 ` Kim, Milo 2015-11-22 23:40 ` Kim, Milo [not found] ` <56525262.60308-l0cyMroinI0@public.gmane.org> 2015-11-23 11:17 ` Jacek Anaszewski 2015-11-23 11:17 ` Jacek Anaszewski 2015-11-02 5:24 ` [PATCH RESEND 16/16] regulator: add LM363X driver Milo Kim 2015-11-02 5:24 ` Milo Kim 2015-11-02 12:26 ` Mark Brown 2015-11-03 6:59 ` Kim, Milo 2015-11-03 6:59 ` Kim, Milo 2015-11-04 13:59 ` Mark Brown 2015-11-10 7:54 ` Kim, Milo 2015-11-10 7:54 ` Kim, Milo 2015-11-02 8:59 ` [PATCH RESEND 00/16] Support TI LMU devices Lee Jones 2015-11-02 8:59 ` Lee Jones 2015-11-03 6:52 ` Kim, Milo 2015-11-03 6:52 ` Kim, Milo 2015-11-03 8:33 ` Lee Jones 2015-11-03 9:08 ` Kim, Milo 2015-11-03 9:08 ` Kim, Milo 2015-11-25 8:51 ` Kim, Milo 2015-11-25 8:51 ` Kim, Milo 2015-11-25 9:05 ` Lee Jones 2015-11-02 9:00 ` Lee Jones 2015-11-03 6:56 ` Kim, Milo 2015-11-03 6:56 ` Kim, Milo 2015-11-03 8:35 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1446441875-1256-4-git-send-email-milo.kim@ti.com \ --to=milo.kim@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=lm-sensors@lm-sensors.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.