From: Wolfram Sang <wsa@the-dreams.de> To: linux-i2c@vger.kernel.org Cc: linux-sh@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>, Simon Horman <horms@verge.net.au>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Geert Uytterhoeven <geert@linux-m68k.org>, Wolfram Sang <wsa@the-dreams.de>, Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH v3 08/11] i2c: rcar: check master irqs before slave irqs Date: Thu, 19 Nov 2015 15:56:48 +0000 [thread overview] Message-ID: <1447948611-2615-9-git-send-email-wsa@the-dreams.de> (raw) In-Reply-To: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> From: Wolfram Sang <wsa+renesas@sang-engineering.com> Due to the HW design, master IRQs are timing critical, so give them precedence over slave IRQ. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-rcar.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 87fccf20fc4c34..f237b4fc5b5e55 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -432,19 +432,17 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) static irqreturn_t rcar_i2c_irq(int irq, void *ptr) { struct rcar_i2c_priv *priv = ptr; - irqreturn_t result = IRQ_HANDLED; u32 msr; - if (rcar_i2c_slave_irq(priv)) - goto exit; - msr = rcar_i2c_read(priv, ICMSR); /* Only handle interrupts that are currently enabled */ msr &= rcar_i2c_read(priv, ICMIER); if (!msr) { - result = IRQ_NONE; - goto exit; + if (rcar_i2c_slave_irq(priv)) + return IRQ_HANDLED; + + return IRQ_NONE; } /* Arbitration lost */ @@ -481,8 +479,7 @@ out: wake_up(&priv->wait); } -exit: - return result; + return IRQ_HANDLED; } static int rcar_i2c_master_xfer(struct i2c_adapter *adap, -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Wolfram Sang <wsa@the-dreams.de> To: linux-i2c@vger.kernel.org Cc: linux-sh@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>, Simon Horman <horms@verge.net.au>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Geert Uytterhoeven <geert@linux-m68k.org>, Wolfram Sang <wsa@the-dreams.de>, Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Subject: [PATCH v3 08/11] i2c: rcar: check master irqs before slave irqs Date: Thu, 19 Nov 2015 16:56:48 +0100 [thread overview] Message-ID: <1447948611-2615-9-git-send-email-wsa@the-dreams.de> (raw) In-Reply-To: <1447948611-2615-1-git-send-email-wsa@the-dreams.de> From: Wolfram Sang <wsa+renesas@sang-engineering.com> Due to the HW design, master IRQs are timing critical, so give them precedence over slave IRQ. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-rcar.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 87fccf20fc4c34..f237b4fc5b5e55 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -432,19 +432,17 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) static irqreturn_t rcar_i2c_irq(int irq, void *ptr) { struct rcar_i2c_priv *priv = ptr; - irqreturn_t result = IRQ_HANDLED; u32 msr; - if (rcar_i2c_slave_irq(priv)) - goto exit; - msr = rcar_i2c_read(priv, ICMSR); /* Only handle interrupts that are currently enabled */ msr &= rcar_i2c_read(priv, ICMIER); if (!msr) { - result = IRQ_NONE; - goto exit; + if (rcar_i2c_slave_irq(priv)) + return IRQ_HANDLED; + + return IRQ_NONE; } /* Arbitration lost */ @@ -481,8 +479,7 @@ out: wake_up(&priv->wait); } -exit: - return result; + return IRQ_HANDLED; } static int rcar_i2c_master_xfer(struct i2c_adapter *adap, -- 2.1.4
next prev parent reply other threads:[~2015-11-19 15:56 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-19 15:56 [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 01/11] i2c: rcar: make sure clocks are on when doing clock calculation Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 02/11] i2c: rcar: rework hw init Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 03/11] i2c: rcar: remove unused IOERROR state Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 04/11] i2c: rcar: remove spinlock Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 05/11] i2c: rcar: refactor setup of a msg Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 06/11] i2c: rcar: init new messages in irq Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 07/11] i2c: rcar: don't issue stop when HW does it automatically Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang [this message] 2015-11-19 15:56 ` [PATCH v3 08/11] i2c: rcar: check master irqs before slave irqs Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 09/11] i2c: rcar: revoke START request early Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2016-03-31 21:02 ` Sergei Shtylyov 2016-03-31 21:02 ` Sergei Shtylyov 2016-03-31 22:48 ` Wolfram Sang 2016-03-31 22:48 ` Wolfram Sang 2016-04-01 19:55 ` Sergei Shtylyov 2016-04-01 19:55 ` Sergei Shtylyov 2016-04-01 20:14 ` Wolfram Sang 2016-04-01 20:14 ` Wolfram Sang 2016-04-01 23:05 ` Sergei Shtylyov 2016-04-01 23:05 ` Sergei Shtylyov 2016-04-02 7:27 ` Wolfram Sang 2016-04-02 7:27 ` Wolfram Sang 2016-04-02 12:51 ` Sergei Shtylyov 2016-04-02 12:51 ` Sergei Shtylyov 2016-04-03 8:25 ` Wolfram Sang 2016-04-03 8:25 ` Wolfram Sang 2016-04-03 13:35 ` Sergei Shtylyov 2016-04-03 13:35 ` Sergei Shtylyov 2016-04-03 13:47 ` Wolfram Sang 2016-04-03 13:47 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 10/11] i2c: rcar: clean up after refactoring Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 15:56 ` [PATCH v3 11/11] i2c: rcar: handle difference in setting up non-first message Wolfram Sang 2015-11-19 15:56 ` Wolfram Sang 2015-11-19 16:01 ` [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver Laurent Pinchart 2015-11-19 16:01 ` Laurent Pinchart 2015-11-30 13:27 ` Wolfram Sang 2015-11-30 13:27 ` Wolfram Sang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1447948611-2615-9-git-send-email-wsa@the-dreams.de \ --to=wsa@the-dreams.de \ --cc=geert@linux-m68k.org \ --cc=horms@verge.net.au \ --cc=kuninori.morimoto.gx@gmail.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.