All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Brian Hutchinson <b.hutchman@gmail.com>,
	Delio Brignoli <dbrignoli@audioscience.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Matthijs van Duin <matthijsvanduin@gmail.com>,
	Philipp Rosenberger <ilu@linutronix.de>
Subject: [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot
Date: Tue,  1 Dec 2015 15:38:13 -0800	[thread overview]
Message-ID: <1449013103-23238-1-git-send-email-tony@atomide.com> (raw)

Hi all,

Here are some fixes for v4.5 merge window to get dm814x-evm booting.
While hp t410 boots based on the bootloader clocks, dm814x-evm needs
more things configured. Especially the clock dts entries were all
wrong and just happened to be harmless on hp t410.

To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1
("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also
manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression
for dm814x") from Linux next.

I have more changes coming up after this series after I clean them
up a bit. Here's a brief status update for people:

What's working after this series on dm814x-evm and hp t410:

- Timers

- Serial

- Ethernet

- DMA

- I2C (only tested so far with i2cdetect -r 0)

- GPIO (only tested with additional MMC patches for card detect)

I have the following additional patches coming soonish:

- Basic ADPLL clock driver

- MMC support

- USB support

- Minimal j5eco-evm support

Should work with just configuration:

- [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers

I'm not working on any of the accelerators or graphics FYI. If somebody
has patches coming for those please notify on the linux-omap and
linux-arm-kernel mailings lists so we can avoid duplicate work.

Cheers,

Tony


Tony Lindgren (10):
  ARM: OMAP2+: Fix timer entries for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: OMAP2+: Disable GPIO softreset for dm81xx
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: dts: Fix dm814x entries for pllss and prcm
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: dts: Fix dm8148 control modules ranges
  ARM: dts: Fix dm814x pinctrl address and mask

 arch/arm/boot/dts/dm814x-clocks.dtsi       | 109 +++++++++++++++++++++--------
 arch/arm/boot/dts/dm814x.dtsi              |  25 ++++---
 arch/arm/mach-omap2/io.c                   |   3 +-
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c |  15 ++--
 arch/arm/mach-omap2/prm_common.c           |   6 ++
 drivers/clk/ti/clk-814x.c                  |   4 ++
 include/linux/clk/ti.h                     |   1 +
 7 files changed, 117 insertions(+), 46 deletions(-)

-- 
2.6.2


WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot
Date: Tue,  1 Dec 2015 15:38:13 -0800	[thread overview]
Message-ID: <1449013103-23238-1-git-send-email-tony@atomide.com> (raw)

Hi all,

Here are some fixes for v4.5 merge window to get dm814x-evm booting.
While hp t410 boots based on the bootloader clocks, dm814x-evm needs
more things configured. Especially the clock dts entries were all
wrong and just happened to be harmless on hp t410.

To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1
("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also
manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression
for dm814x") from Linux next.

I have more changes coming up after this series after I clean them
up a bit. Here's a brief status update for people:

What's working after this series on dm814x-evm and hp t410:

- Timers

- Serial

- Ethernet

- DMA

- I2C (only tested so far with i2cdetect -r 0)

- GPIO (only tested with additional MMC patches for card detect)

I have the following additional patches coming soonish:

- Basic ADPLL clock driver

- MMC support

- USB support

- Minimal j5eco-evm support

Should work with just configuration:

- [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers

I'm not working on any of the accelerators or graphics FYI. If somebody
has patches coming for those please notify on the linux-omap and
linux-arm-kernel mailings lists so we can avoid duplicate work.

Cheers,

Tony


Tony Lindgren (10):
  ARM: OMAP2+: Fix timer entries for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: OMAP2+: Disable GPIO softreset for dm81xx
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: dts: Fix dm814x entries for pllss and prcm
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: dts: Fix dm8148 control modules ranges
  ARM: dts: Fix dm814x pinctrl address and mask

 arch/arm/boot/dts/dm814x-clocks.dtsi       | 109 +++++++++++++++++++++--------
 arch/arm/boot/dts/dm814x.dtsi              |  25 ++++---
 arch/arm/mach-omap2/io.c                   |   3 +-
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c |  15 ++--
 arch/arm/mach-omap2/prm_common.c           |   6 ++
 drivers/clk/ti/clk-814x.c                  |   4 ++
 include/linux/clk/ti.h                     |   1 +
 7 files changed, 117 insertions(+), 46 deletions(-)

-- 
2.6.2

             reply	other threads:[~2015-12-01 23:38 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-01 23:38 Tony Lindgren [this message]
2015-12-01 23:38 ` [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot Tony Lindgren
2015-12-01 23:38 ` [PATCH 01/10] ARM: OMAP2+: Fix timer entries for dm814x Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 02/10] clk: ti: Add few dm814x clock aliases Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-08 16:57   ` Tony Lindgren
2015-12-08 16:57     ` Tony Lindgren
2015-12-08 19:26     ` Tero Kristo
2015-12-08 19:26       ` Tero Kristo
2015-12-08 19:26       ` Tero Kristo
2015-12-08 20:11       ` Tony Lindgren
2015-12-08 20:11         ` Tony Lindgren
2015-12-09  7:51         ` Tero Kristo
2015-12-09  7:51           ` Tero Kristo
2015-12-09  7:51           ` Tero Kristo
2015-12-10  0:56           ` Tony Lindgren
2015-12-10  0:56             ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 03/10] ARM: OMAP2+: Add DPPLS clock manager for dm814x Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 04/10] ARM: OMAP2+: Enable GPIO " Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 05/10] ARM: OMAP2+: Disable GPIO softreset for dm81xx Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-02  0:10   ` Matthijs van Duin
2015-12-02  0:10     ` Matthijs van Duin
2015-12-02  0:10     ` Matthijs van Duin
2015-12-02  0:41     ` Tony Lindgren
2015-12-02  0:41       ` Tony Lindgren
2015-12-02  0:41       ` Tony Lindgren
2015-12-02  0:54       ` Tony Lindgren
2015-12-02  0:54         ` Tony Lindgren
2015-12-02  0:54         ` Tony Lindgren
2015-12-02  1:38         ` Tony Lindgren
2015-12-02  1:38           ` Tony Lindgren
2015-12-02  1:38           ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 06/10] ARM: OMAP2+: Remove useless check for legacy booting for dm814x Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 07/10] ARM: dts: Fix dm814x entries for pllss and prcm Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 08/10] ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 09/10] ARM: dts: Fix dm8148 control modules ranges Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-01 23:38 ` [PATCH 10/10] ARM: dts: Fix dm814x pinctrl address and mask Tony Lindgren
2015-12-01 23:38   ` Tony Lindgren
2015-12-02  0:25   ` Matthijs van Duin
2015-12-02  0:25     ` Matthijs van Duin
2015-12-02  0:25     ` Matthijs van Duin
2015-12-02  0:46     ` Tony Lindgren
2015-12-02  0:46       ` Tony Lindgren
2015-12-02  0:46       ` Tony Lindgren
2015-12-02  1:14       ` Matthijs van Duin
2015-12-02  1:14         ` Matthijs van Duin
2015-12-02  1:14         ` Matthijs van Duin
2015-12-02  1:22         ` Tony Lindgren
2015-12-02  1:22           ` Tony Lindgren
2015-12-02  1:22           ` Tony Lindgren
2015-12-02 16:09           ` Tony Lindgren
2015-12-02 16:09             ` Tony Lindgren
2015-12-02 16:09             ` Tony Lindgren
2015-12-02  1:21       ` Matthijs van Duin
2015-12-02  1:21         ` Matthijs van Duin
2015-12-02  1:21         ` Matthijs van Duin
2015-12-02 16:13         ` Tony Lindgren
2015-12-02 16:13           ` Tony Lindgren
2015-12-02 16:13           ` Tony Lindgren
2015-12-03 18:17 ` [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot Grygorii Strashko
2015-12-03 18:17   ` Grygorii Strashko
2015-12-03 18:17   ` Grygorii Strashko
2015-12-03 19:21   ` Tony Lindgren
2015-12-03 19:21     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449013103-23238-1-git-send-email-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=b.hutchman@gmail.com \
    --cc=dbrignoli@audioscience.com \
    --cc=ilu@linutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=matthijsvanduin@gmail.com \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.