[PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[igal.liberman-KZfg59tc24xl57MIdRCFDg]

From: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

Signed-off-by: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 .../devicetree/bindings/powerpc/fsl/fman.txt       |   39 ++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 1fc5328..7a6d7c3 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -315,6 +315,16 @@ PROPERTIES
 		Value type: <phandle>
 		Definition: A phandle for 1EEE1588 timer.
 
+- pcsphy-handle
+		Usage required for "fsl,fman-memac" MACs
+		Value type: <phandle>
+		Definition: A phandle for pcsphy.
+
+- tbi-handle
+		Usage required for "fsl,fman-dtsec" MACs
+		Value type: <phandle>
+		Definition: A phandle for tbiphy.
+
 EXAMPLE
 
 fman1_tx28: port@a8000 {
@@ -340,6 +350,7 @@ ethernet@e0000 {
 	reg = <0xe0000 0x1000>;
 	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
 	ptp-timer = <&ptp-timer>;
+	tbi-handle = <&tbi0>;
 };
 
 ============================================================================
@@ -415,6 +426,13 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+  PCS PHY addr must be '0'.
+
 EXAMPLE
 
 Example for FMan v2 external MDIO:
@@ -425,12 +443,28 @@ mdio@f1000 {
 	interrupts = <101 2 0 0>;
 };
 
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+	compatible = "fsl,fman-mdio";
+	reg = <0xe3120 0xee0>;
+	fsl,fman-internal-mdio;
+
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
 Example for FMan v3 internal MDIO:
 
 mdio@f1000 {
 	compatible = "fsl,fman-memac-mdio";
 	reg = <0xf1000 0x1000>;
 	fsl,fman-internal-mdio;
+
+	pcsphy6: ethernet-phy@0 {
+		reg = <0x0>;
 };
 
 =============================================================================
@@ -568,6 +602,7 @@ fman@400000 {
 		cell-index = <0>;
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
 	};
 
 	ethernet@e2000 {
@@ -575,6 +610,7 @@ fman@400000 {
 		cell-index = <1>;
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
 	};
 
 	ethernet@e4000 {
@@ -582,6 +618,7 @@ fman@400000 {
 		cell-index = <2>;
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
 	};
 
 	ethernet@e6000 {
@@ -589,6 +626,7 @@ fman@400000 {
 		cell-index = <3>;
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
 	};
 
 	ethernet@e8000 {
@@ -596,6 +634,7 @@ fman@400000 {
 		cell-index = <4>;
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
 
 	ethernet@f0000 {
 		cell-index = <8>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[igal.liberman]

From: Igal Liberman <igal.liberman@freescale.com>

Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
---
 .../devicetree/bindings/powerpc/fsl/fman.txt       |   39 ++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 1fc5328..7a6d7c3 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -315,6 +315,16 @@ PROPERTIES
 		Value type: <phandle>
 		Definition: A phandle for 1EEE1588 timer.
 
+- pcsphy-handle
+		Usage required for "fsl,fman-memac" MACs
+		Value type: <phandle>
+		Definition: A phandle for pcsphy.
+
+- tbi-handle
+		Usage required for "fsl,fman-dtsec" MACs
+		Value type: <phandle>
+		Definition: A phandle for tbiphy.
+
 EXAMPLE
 
 fman1_tx28: port@a8000 {
@@ -340,6 +350,7 @@ ethernet@e0000 {
 	reg = <0xe0000 0x1000>;
 	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
 	ptp-timer = <&ptp-timer>;
+	tbi-handle = <&tbi0>;
 };
 
 ============================================================================
@@ -415,6 +426,13 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
+  PCS PHY addr must be '0'.
+
 EXAMPLE
 
 Example for FMan v2 external MDIO:
@@ -425,12 +443,28 @@ mdio@f1000 {
 	interrupts = <101 2 0 0>;
 };
 
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+	compatible = "fsl,fman-mdio";
+	reg = <0xe3120 0xee0>;
+	fsl,fman-internal-mdio;
+
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
 Example for FMan v3 internal MDIO:
 
 mdio@f1000 {
 	compatible = "fsl,fman-memac-mdio";
 	reg = <0xf1000 0x1000>;
 	fsl,fman-internal-mdio;
+
+	pcsphy6: ethernet-phy@0 {
+		reg = <0x0>;
 };
 
 =============================================================================
@@ -568,6 +602,7 @@ fman@400000 {
 		cell-index = <0>;
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
 	};
 
 	ethernet@e2000 {
@@ -575,6 +610,7 @@ fman@400000 {
 		cell-index = <1>;
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
 	};
 
 	ethernet@e4000 {
@@ -582,6 +618,7 @@ fman@400000 {
 		cell-index = <2>;
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
 	};
 
 	ethernet@e6000 {
@@ -589,6 +626,7 @@ fman@400000 {
 		cell-index = <3>;
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
 	};
 
 	ethernet@e8000 {
@@ -596,6 +634,7 @@ fman@400000 {
 		cell-index = <4>;
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
 
 	ethernet@f0000 {
 		cell-index = <8>;
-- 
1.7.9.5

Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Joakim Tjernlund]

On Tue, 2015-12-22 at 06:18 +0200, igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> 
> Signed-off-by: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  .../devicetree/bindings/powerpc/fsl/fman.txt       |   39 ++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index 1fc5328..7a6d7c3 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -315,6 +315,16 @@ PROPERTIES
>  		Value type: <phandle>
>  		Definition: A phandle for 1EEE1588 timer.
>  
> +- pcsphy-handle
> +		Usage required for "fsl,fman-memac" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for pcsphy.
> +
> +- tbi-handle
> +		Usage required for "fsl,fman-dtsec" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for tbiphy.
> +
>  EXAMPLE
>  
>  fman1_tx28: port@a8000 {
> @@ -340,6 +350,7 @@ ethernet@e0000 {
>  	reg = <0xe0000 0x1000>;
>  	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
>  	ptp-timer = <&ptp-timer>;
> +	tbi-handle = <&tbi0>;
>  };
>  
>  ============================================================================
> @@ -415,6 +426,13 @@ PROPERTIES
>  		The settings and programming routines for internal/external
>  		MDIO are different. Must be included for internal MDIO.
>  
> +For internal PHY device on internal mdio bus, a PHY node should be created.
> +See the definition of the PHY node in booting-without-of.txt for an
> +example of how to define a PHY (Internal PHY has no interrupt line).
> +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
> +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
> +  PCS PHY addr must be '0'.

Will this replace the need for fixed PHYs ?

   Jocke--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Joakim Tjernlund]

On Tue, 2015-12-22 at 06:18 +0200, igal.liberman@freescale.com wrote:
> From: Igal Liberman <igal.liberman@freescale.com>
>=20
> Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
> ---
> =A0.../devicetree/bindings/powerpc/fsl/fman.txt=A0=A0=A0=A0=A0=A0=A0|=A0=
=A0=A039 ++++++++++++++++++++
> =A01 file changed, 39 insertions(+)
>=20
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index 1fc5328..7a6d7c3 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -315,6 +315,16 @@ PROPERTIES
> =A0		Value type: <phandle>
> =A0		Definition: A phandle for 1EEE1588 timer.
> =A0
> +- pcsphy-handle
> +		Usage required for "fsl,fman-memac" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for pcsphy.
> +
> +- tbi-handle
> +		Usage required for "fsl,fman-dtsec" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for tbiphy.
> +
> =A0EXAMPLE
> =A0
> =A0fman1_tx28: port@a8000 {
> @@ -340,6 +350,7 @@ ethernet@e0000 {
> =A0	reg =3D <0xe0000 0x1000>;
> =A0	fsl,fman-ports =3D <&fman1_rx8 &fman1_tx28>;
> =A0	ptp-timer =3D <&ptp-timer>;
> +	tbi-handle =3D <&tbi0>;
> =A0};
> =A0
> =A0=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
> @@ -415,6 +426,13 @@ PROPERTIES
> =A0		The settings and programming routines for internal/external
> =A0		MDIO are different. Must be included for internal MDIO.
> =A0
> +For internal PHY device on internal mdio bus, a PHY node should be creat=
ed.
> +See the definition of the PHY node in booting-without-of.txt for an
> +example of how to define a PHY (Internal PHY has no interrupt line).
> +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
> +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS=
 PHY,
> +=A0=A0PCS PHY addr must be '0'.

Will this replace the need for fixed PHYs ?

=A0 =A0Jocke=

RE: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Liberman Igal]

Regards,
Igal Liberman

> -----Original Message-----
> From: Joakim Tjernlund [mailto:Joakim.Tjernlund-27rvihrghlNWk0Htik3J/w@public.gmane.org]
> Sent: Tuesday, December 22, 2015 5:57 PM
> To: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; Liberman Igal-B31950
> <Igal.Liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Wood Scott-B07421 <scottwood-KZfg59tc24xl57MIdRCFDg@public.gmane.org>; Xie Shaohui-B21989
> <Shaohui.Xie-KZfg59tc24xl57MIdRCFDg@public.gmane.org>; Bucur Madalin-Cristian-B32716
> <madalin.bucur-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Subject: Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and
> tbi-phy
> 
> On Tue, 2015-12-22 at 06:18 +0200, igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> > From: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> >
> > Signed-off-by: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  .../devicetree/bindings/powerpc/fsl/fman.txt       |   39
> > ++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > index 1fc5328..7a6d7c3 100644
> > --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > @@ -315,6 +315,16 @@ PROPERTIES
> >  		Value type: <phandle>
> >  		Definition: A phandle for 1EEE1588 timer.
> >
> > +- pcsphy-handle
> > +		Usage required for "fsl,fman-memac" MACs
> > +		Value type: <phandle>
> > +		Definition: A phandle for pcsphy.
> > +
> > +- tbi-handle
> > +		Usage required for "fsl,fman-dtsec" MACs
> > +		Value type: <phandle>
> > +		Definition: A phandle for tbiphy.
> > +
> >  EXAMPLE
> >
> >  fman1_tx28: port@a8000 {
> > @@ -340,6 +350,7 @@ ethernet@e0000 {
> >  	reg = <0xe0000 0x1000>;
> >  	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
> >  	ptp-timer = <&ptp-timer>;
> > +	tbi-handle = <&tbi0>;
> >  };
> >
> >
> >
> ==========================================================
> ============
> > ======
> > @@ -415,6 +426,13 @@ PROPERTIES
> >  		The settings and programming routines for internal/external
> >  		MDIO are different. Must be included for internal MDIO.
> >
> > +For internal PHY device on internal mdio bus, a PHY node should be
> created.
> > +See the definition of the PHY node in booting-without-of.txt for an
> > +example of how to define a PHY (Internal PHY has no interrupt line).
> > +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
> > +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is
> > +PCS PHY,
> > +  PCS PHY addr must be '0'.
> 
> Will this replace the need for fixed PHYs ?
> 

Hi Jocke,

No, this is internal PCS configuration which required for both types of links.
The configuration for fixed links is different, but we use the same method.

Igal

>    Jocke
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Liberman Igal]

Regards,
Igal Liberman

> -----Original Message-----
> From: Joakim Tjernlund [mailto:Joakim.Tjernlund@infinera.com]
> Sent: Tuesday, December 22, 2015 5:57 PM
> To: linuxppc-dev@lists.ozlabs.org; Liberman Igal-B31950
> <Igal.Liberman@freescale.com>; devicetree@vger.kernel.org
> Cc: Wood Scott-B07421 <scottwood@freescale.com>; Xie Shaohui-B21989
> <Shaohui.Xie@freescale.com>; Bucur Madalin-Cristian-B32716
> <madalin.bucur@freescale.com>
> Subject: Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and
> tbi-phy
>=20
> On Tue, 2015-12-22 at 06:18 +0200, igal.liberman@freescale.com wrote:
> > From: Igal Liberman <igal.liberman@freescale.com>
> >
> > Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
> > ---
> > =A0.../devicetree/bindings/powerpc/fsl/fman.txt=A0=A0=A0=A0=A0=A0=A0|=
=A0=A0=A039
> > ++++++++++++++++++++
> > =A01 file changed, 39 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > index 1fc5328..7a6d7c3 100644
> > --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> > @@ -315,6 +315,16 @@ PROPERTIES
> > =A0		Value type: <phandle>
> > =A0		Definition: A phandle for 1EEE1588 timer.
> >
> > +- pcsphy-handle
> > +		Usage required for "fsl,fman-memac" MACs
> > +		Value type: <phandle>
> > +		Definition: A phandle for pcsphy.
> > +
> > +- tbi-handle
> > +		Usage required for "fsl,fman-dtsec" MACs
> > +		Value type: <phandle>
> > +		Definition: A phandle for tbiphy.
> > +
> > =A0EXAMPLE
> >
> > =A0fman1_tx28: port@a8000 {
> > @@ -340,6 +350,7 @@ ethernet@e0000 {
> > =A0	reg =3D <0xe0000 0x1000>;
> > =A0	fsl,fman-ports =3D <&fman1_rx8 &fman1_tx28>;
> > =A0	ptp-timer =3D <&ptp-timer>;
> > +	tbi-handle =3D <&tbi0>;
> > =A0};
> >
> >
> >
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> > =3D=3D=3D=3D=3D=3D
> > @@ -415,6 +426,13 @@ PROPERTIES
> > =A0		The settings and programming routines for internal/external
> > =A0		MDIO are different. Must be included for internal MDIO.
> >
> > +For internal PHY device on internal mdio bus, a PHY node should be
> created.
> > +See the definition of the PHY node in booting-without-of.txt for an
> > +example of how to define a PHY (Internal PHY has no interrupt line).
> > +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY=
.
> > +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is
> > +PCS PHY,
> > +=A0=A0PCS PHY addr must be '0'.
>=20
> Will this replace the need for fixed PHYs ?
>=20

Hi Jocke,

No, this is internal PCS configuration which required for both types of lin=
ks.
The configuration for fixed links is different, but we use the same method.

Igal

> =A0 =A0Jocke

Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Scott Wood]

On Tue, 2015-12-22 at 06:18 +0200, igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> 
> Signed-off-by: Igal Liberman <igal.liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  .../devicetree/bindings/powerpc/fsl/fman.txt       |   39
> ++++++++++++++++++++
>  1 file changed, 39 insertions(+)

Some description in the log would be nice, especially why it can't use phy
-handle

> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index 1fc5328..7a6d7c3 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -315,6 +315,16 @@ PROPERTIES
>  		Value type: <phandle>
>  		Definition: A phandle for 1EEE1588 timer.
>  
> +- pcsphy-handle
> +		Usage required for "fsl,fman-memac" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for pcsphy.
> +
> +- tbi-handle
> +		Usage required for "fsl,fman-dtsec" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for tbiphy.
> +
>  EXAMPLE
>  
>  fman1_tx28: port@a8000 {
> @@ -340,6 +350,7 @@ ethernet@e0000 {
>  	reg = <0xe0000 0x1000>;
>  	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
>  	ptp-timer = <&ptp-timer>;
> +	tbi-handle = <&tbi0>;
>  };
>  
>  ===========================================================================
> =
> @@ -415,6 +426,13 @@ PROPERTIES
>  		The settings and programming routines for internal/external
>  		MDIO are different. Must be included for internal MDIO.
>  
> +For internal PHY device on internal mdio bus, a PHY node should be created.
> +See the definition of the PHY node in booting-without-of.txt for an
> +example of how to define a PHY (Internal PHY has no interrupt line).
> +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
> +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS
> PHY,
> +  PCS PHY addr must be '0'.
> +
>  EXAMPLE
>  
>  Example for FMan v2 external MDIO:
> @@ -425,12 +443,28 @@ mdio@f1000 {
>  	interrupts = <101 2 0 0>;
>  };
>  
> +Example for FMan v2 internal MDIO:
> +
> +mdio@e3120 {
> +	compatible = "fsl,fman-mdio";
> +	reg = <0xe3120 0xee0>;
> +	fsl,fman-internal-mdio;
> +
> +	tbi1: tbi-phy@8 {
> +		reg = <0x8>;
> +		device_type = "tbi-phy";
> +	};
> +};
> +
>  Example for FMan v3 internal MDIO:
>  
>  mdio@f1000 {
>  	compatible = "fsl,fman-memac-mdio";
>  	reg = <0xf1000 0x1000>;
>  	fsl,fman-internal-mdio;
> +
> +	pcsphy6: ethernet-phy@0 {
> +		reg = <0x0>;
>  };

missing }

-Scott

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy

[Scott Wood]

On Tue, 2015-12-22 at 06:18 +0200, igal.liberman@freescale.com wrote:
> From: Igal Liberman <igal.liberman@freescale.com>
> 
> Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
> ---
>  .../devicetree/bindings/powerpc/fsl/fman.txt       |   39
> ++++++++++++++++++++
>  1 file changed, 39 insertions(+)

Some description in the log would be nice, especially why it can't use phy
-handle

> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index 1fc5328..7a6d7c3 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -315,6 +315,16 @@ PROPERTIES
>  		Value type: <phandle>
>  		Definition: A phandle for 1EEE1588 timer.
>  
> +- pcsphy-handle
> +		Usage required for "fsl,fman-memac" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for pcsphy.
> +
> +- tbi-handle
> +		Usage required for "fsl,fman-dtsec" MACs
> +		Value type: <phandle>
> +		Definition: A phandle for tbiphy.
> +
>  EXAMPLE
>  
>  fman1_tx28: port@a8000 {
> @@ -340,6 +350,7 @@ ethernet@e0000 {
>  	reg = <0xe0000 0x1000>;
>  	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
>  	ptp-timer = <&ptp-timer>;
> +	tbi-handle = <&tbi0>;
>  };
>  
>  ===========================================================================
> =
> @@ -415,6 +426,13 @@ PROPERTIES
>  		The settings and programming routines for internal/external
>  		MDIO are different. Must be included for internal MDIO.
>  
> +For internal PHY device on internal mdio bus, a PHY node should be created.
> +See the definition of the PHY node in booting-without-of.txt for an
> +example of how to define a PHY (Internal PHY has no interrupt line).
> +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
> +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS
> PHY,
> +  PCS PHY addr must be '0'.
> +
>  EXAMPLE
>  
>  Example for FMan v2 external MDIO:
> @@ -425,12 +443,28 @@ mdio@f1000 {
>  	interrupts = <101 2 0 0>;
>  };
>  
> +Example for FMan v2 internal MDIO:
> +
> +mdio@e3120 {
> +	compatible = "fsl,fman-mdio";
> +	reg = <0xe3120 0xee0>;
> +	fsl,fman-internal-mdio;
> +
> +	tbi1: tbi-phy@8 {
> +		reg = <0x8>;
> +		device_type = "tbi-phy";
> +	};
> +};
> +
>  Example for FMan v3 internal MDIO:
>  
>  mdio@f1000 {
>  	compatible = "fsl,fman-memac-mdio";
>  	reg = <0xf1000 0x1000>;
>  	fsl,fman-internal-mdio;
> +
> +	pcsphy6: ethernet-phy@0 {
> +		reg = <0x0>;
>  };

missing }

-Scott