[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Xing Zheng]

Hi:
  In the development work, we found that some of the previous
incorrect clock configuration on the RK3036 platform, we should
fix them.



Xing Zheng (5):
  clk: rockchip: rk3036: fix the FLAGs for clock mux
  clk: rockchip: rk3036: fix uarts clock error
  clk: rockchip: rk3036: fix the div offset for emac clock
  clk: rockchip: rk3036: rename emac ext source clock
  clk: rockchip: rk3036: add HCLK_MAC id for emac

 drivers/clk/rockchip/clk-rk3036.c      |   28 ++++++++++++++--------------
 include/dt-bindings/clock/rk3036-cru.h |    1 +
 2 files changed, 15 insertions(+), 14 deletions(-)

-- 
1.7.9.5

[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Xing Zheng]

Hi:
  In the development work, we found that some of the previous
incorrect clock configuration on the RK3036 platform, we should
fix them.



Xing Zheng (5):
  clk: rockchip: rk3036: fix the FLAGs for clock mux
  clk: rockchip: rk3036: fix uarts clock error
  clk: rockchip: rk3036: fix the div offset for emac clock
  clk: rockchip: rk3036: rename emac ext source clock
  clk: rockchip: rk3036: add HCLK_MAC id for emac

 drivers/clk/rockchip/clk-rk3036.c      |   28 ++++++++++++++--------------
 include/dt-bindings/clock/rk3036-cru.h |    1 +
 2 files changed, 15 insertions(+), 14 deletions(-)

-- 
1.7.9.5

[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Xing Zheng]

Hi:
  In the development work, we found that some of the previous
incorrect clock configuration on the RK3036 platform, we should
fix them.



Xing Zheng (5):
  clk: rockchip: rk3036: fix the FLAGs for clock mux
  clk: rockchip: rk3036: fix uarts clock error
  clk: rockchip: rk3036: fix the div offset for emac clock
  clk: rockchip: rk3036: rename emac ext source clock
  clk: rockchip: rk3036: add HCLK_MAC id for emac

 drivers/clk/rockchip/clk-rk3036.c      |   28 ++++++++++++++--------------
 include/dt-bindings/clock/rk3036-cru.h |    1 +
 2 files changed, 15 insertions(+), 14 deletions(-)

-- 
1.7.9.5

[PATCH v2 1/5] clk: rockchip: rk3036: fix the FLAGs for clock mux

[Xing Zheng]

The DFLAGS are used for the clock dividers, the CLKSEL_CON flags
of COMPOSITE_NODIV type should be MFLAGS.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index ebce980..7e3b41c 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -224,16 +224,16 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(2), 2, GFLAGS),
 
 	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 4, 1, MFLAGS,
 			RK2928_CLKGATE_CON(1), 0, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 5, 1, MFLAGS,
 			RK2928_CLKGATE_CON(1), 1, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 6, 1, MFLAGS,
 			RK2928_CLKGATE_CON(2), 4, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 7, 1, MFLAGS,
 			RK2928_CLKGATE_CON(2), 5, GFLAGS),
 
 	MUX(0, "uart_pll_clk", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
@@ -279,13 +279,13 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(3), 2, GFLAGS),
 
 	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
-			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
+			RK2928_CLKSEL_CON(12), 8, 2, MFLAGS,
 			RK2928_CLKGATE_CON(2), 11, GFLAGS),
 	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
 			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
 
 	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
-			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
+			RK2928_CLKSEL_CON(12), 10, 2, MFLAGS,
 			RK2928_CLKGATE_CON(2), 13, GFLAGS),
 	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
 			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
-- 
1.7.9.5

[PATCH v2 1/5] clk: rockchip: rk3036: fix the FLAGs for clock mux

[Xing Zheng]

The DFLAGS are used for the clock dividers, the CLKSEL_CON flags
of COMPOSITE_NODIV type should be MFLAGS.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index ebce980..7e3b41c 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -224,16 +224,16 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(2), 2, GFLAGS),
 
 	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 4, 1, MFLAGS,
 			RK2928_CLKGATE_CON(1), 0, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 5, 1, MFLAGS,
 			RK2928_CLKGATE_CON(1), 1, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 6, 1, MFLAGS,
 			RK2928_CLKGATE_CON(2), 4, GFLAGS),
 	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
-			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
+			RK2928_CLKSEL_CON(2), 7, 1, MFLAGS,
 			RK2928_CLKGATE_CON(2), 5, GFLAGS),
 
 	MUX(0, "uart_pll_clk", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
@@ -279,13 +279,13 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(3), 2, GFLAGS),
 
 	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
-			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
+			RK2928_CLKSEL_CON(12), 8, 2, MFLAGS,
 			RK2928_CLKGATE_CON(2), 11, GFLAGS),
 	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
 			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
 
 	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
-			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
+			RK2928_CLKSEL_CON(12), 10, 2, MFLAGS,
 			RK2928_CLKGATE_CON(2), 13, GFLAGS),
 	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
 			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
-- 
1.7.9.5

[PATCH v2 2/5] clk: rockchip: rk3036: fix uarts clock error

[Xing Zheng]

Due to a copy-paste error the uart1 and uart2 clock div set
incorrect, we should to fix it.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 7e3b41c..04b5249 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -242,11 +242,11 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
 			RK2928_CLKGATE_CON(1), 8, GFLAGS),
 	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
-			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
-			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+			RK2928_CLKSEL_CON(14), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 10, GFLAGS),
 	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
-			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
-			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+			RK2928_CLKSEL_CON(15), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 12, GFLAGS),
 	COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(17), 0,
 			RK2928_CLKGATE_CON(1), 9, GFLAGS,
-- 
1.7.9.5

[PATCH v2 2/5] clk: rockchip: rk3036: fix uarts clock error

[Xing Zheng]

Due to a copy-paste error the uart1 and uart2 clock div set
incorrect, we should to fix it.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 7e3b41c..04b5249 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -242,11 +242,11 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
 			RK2928_CLKGATE_CON(1), 8, GFLAGS),
 	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
-			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
-			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+			RK2928_CLKSEL_CON(14), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 10, GFLAGS),
 	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
-			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
-			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+			RK2928_CLKSEL_CON(15), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 12, GFLAGS),
 	COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(17), 0,
 			RK2928_CLKGATE_CON(1), 9, GFLAGS,
-- 
1.7.9.5

[PATCH v2 3/5] clk: rockchip: rk3036: fix the div offset for emac clock

[Xing Zheng]

Due to reference to old version TRM, there are incorrect emac clock node.
The SEL_21_9 is used for the parent div, the SEL_21_4 is used for the
child div.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 04b5249..1f00fab 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -344,12 +344,12 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
 	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
-			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 9, 5, DFLAGS),
 	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
 
 	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
-			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+			RK2928_CLKSEL_CON(21), 4, 5, DFLAGS,
 			RK2928_CLKGATE_CON(2), 6, GFLAGS),
 
 	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
-- 
1.7.9.5

[PATCH v2 3/5] clk: rockchip: rk3036: fix the div offset for emac clock

[Xing Zheng]

Due to reference to old version TRM, there are incorrect emac clock node.
The SEL_21_9 is used for the parent div, the SEL_21_4 is used for the
child div.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 04b5249..1f00fab 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -344,12 +344,12 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
 	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
-			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 9, 5, DFLAGS),
 	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
 
 	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
-			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+			RK2928_CLKSEL_CON(21), 4, 5, DFLAGS,
 			RK2928_CLKGATE_CON(2), 6, GFLAGS),
 
 	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
-- 
1.7.9.5

[PATCH v2 4/5] clk: rockchip: rk3036: rename emac ext source clock

[Xing Zheng]

There is only support rmii in the RK3036, so we should use the correct
ext clock name.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 1f00fab..bc7fbac 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -133,7 +133,7 @@ PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
 PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "rmii_clkin" };
 PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_cru" };
 
 static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
-- 
1.7.9.5

[PATCH v2 4/5] clk: rockchip: rk3036: rename emac ext source clock

[Xing Zheng]

There is only support rmii in the RK3036, so we should use the correct
ext clock name.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 1f00fab..bc7fbac 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -133,7 +133,7 @@ PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
 PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "rmii_clkin" };
 PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_cru" };
 
 static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
-- 
1.7.9.5

[PATCH v2 5/5] clk: rockchip: rk3036: add HCLK_MAC id for emac

[Xing Zheng]

We need to add HCLK_MAC id explicitly because that it is referred
by hclk in the emac driver.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c      |    2 +-
 include/dt-bindings/clock/rk3036-cru.h |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index bc7fbac..15cd29a 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -404,7 +404,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
 	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
 	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
-	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
 
 	/* pclk_peri gates */
 	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
index ebc7a7b..3396591 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -92,6 +92,7 @@
 #define HCLK_SDMMC		456
 #define HCLK_SDIO		457
 #define HCLK_EMMC		459
+#define HCLK_MAC		460
 #define HCLK_I2S		462
 #define HCLK_LCDC		465
 #define HCLK_ROM		467
-- 
1.7.9.5

[PATCH v2 5/5] clk: rockchip: rk3036: add HCLK_MAC id for emac

[Xing Zheng]

We need to add HCLK_MAC id explicitly because that it is referred
by hclk in the emac driver.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c      |    2 +-
 include/dt-bindings/clock/rk3036-cru.h |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index bc7fbac..15cd29a 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -404,7 +404,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
 	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
 	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
-	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
 
 	/* pclk_peri gates */
 	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
index ebc7a7b..3396591 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -92,6 +92,7 @@
 #define HCLK_SDMMC		456
 #define HCLK_SDIO		457
 #define HCLK_EMMC		459
+#define HCLK_MAC		460
 #define HCLK_I2S		462
 #define HCLK_LCDC		465
 #define HCLK_ROM		467
-- 
1.7.9.5

Re: [PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Heiko Stuebner]

Hi Xing

Am Donnerstag, 7. Januar 2016, 20:17:32 schrieb Xing Zheng:
>   In the development work, we found that some of the previous
> incorrect clock configuration on the RK3036 platform, we should
> fix them.

I've applied patches 1-4 as fixes for 4.5 [0] and will apply patch 5
regularly once 4.5-rc1 is released and I have stable base again.


> Xing Zheng (5):
>   clk: rockchip: rk3036: fix the FLAGs for clock mux
>   clk: rockchip: rk3036: fix uarts clock error
>   clk: rockchip: rk3036: fix the div offset for emac clock
>   clk: rockchip: rk3036: rename emac ext source clock

please make sure to also update the binding document in such cases.
I've done it myself for this one.

[for people reading along: the rk3036 clock-driver + binding is new in
4.5 so we should be ok to fix the naming before it is actually released]


Heiko


[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/fixes

[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Heiko Stuebner]

Hi Xing

Am Donnerstag, 7. Januar 2016, 20:17:32 schrieb Xing Zheng:
>   In the development work, we found that some of the previous
> incorrect clock configuration on the RK3036 platform, we should
> fix them.

I've applied patches 1-4 as fixes for 4.5 [0] and will apply patch 5
regularly once 4.5-rc1 is released and I have stable base again.


> Xing Zheng (5):
>   clk: rockchip: rk3036: fix the FLAGs for clock mux
>   clk: rockchip: rk3036: fix uarts clock error
>   clk: rockchip: rk3036: fix the div offset for emac clock
>   clk: rockchip: rk3036: rename emac ext source clock

please make sure to also update the binding document in such cases.
I've done it myself for this one.

[for people reading along: the rk3036 clock-driver + binding is new in
4.5 so we should be ok to fix the naming before it is actually released]


Heiko


[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/fixes

Re: [PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Heiko Stuebner]

Hi Xing

Am Donnerstag, 7. Januar 2016, 20:17:32 schrieb Xing Zheng:
>   In the development work, we found that some of the previous
> incorrect clock configuration on the RK3036 platform, we should
> fix them.

I've applied patches 1-4 as fixes for 4.5 [0] and will apply patch 5
regularly once 4.5-rc1 is released and I have stable base again.


> Xing Zheng (5):
>   clk: rockchip: rk3036: fix the FLAGs for clock mux
>   clk: rockchip: rk3036: fix uarts clock error
>   clk: rockchip: rk3036: fix the div offset for emac clock
>   clk: rockchip: rk3036: rename emac ext source clock

please make sure to also update the binding document in such cases.
I've done it myself for this one.

[for people reading along: the rk3036 clock-driver + binding is new in
4.5 so we should be ok to fix the naming before it is actually released]


Heiko


[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/fixes

Re: [PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Xing Zheng]

Hi Heiko,

On 2016年01月10日 04:10, Heiko Stuebner wrote:
> Hi Xing
>
> Am Donnerstag, 7. Januar 2016, 20:17:32 schrieb Xing Zheng:
>>    In the development work, we found that some of the previous
>> incorrect clock configuration on the RK3036 platform, we should
>> fix them.
> I've applied patches 1-4 as fixes for 4.5 [0] and will apply patch 5
> regularly once 4.5-rc1 is released and I have stable base again.
>
>
>> Xing Zheng (5):
>>    clk: rockchip: rk3036: fix the FLAGs for clock mux
>>    clk: rockchip: rk3036: fix uarts clock error
>>    clk: rockchip: rk3036: fix the div offset for emac clock
>>    clk: rockchip: rk3036: rename emac ext source clock
> please make sure to also update the binding document in such cases.
> I've done it myself for this one.
>
> [for people reading along: the rk3036 clock-driver + binding is new in
> 4.5 so we should be ok to fix the naming before it is actually released]
>
>
> Heiko
>
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/fixes
>
OK, I have updated the rockchip,rk3036-cru.txt and sent a patch to the 
upstream.

Thanks.

[PATCH v2 0/5] fix some clock configuration for the RK3036 platform

[Xing Zheng]

Hi Heiko,

On 2016?01?10? 04:10, Heiko Stuebner wrote:
> Hi Xing
>
> Am Donnerstag, 7. Januar 2016, 20:17:32 schrieb Xing Zheng:
>>    In the development work, we found that some of the previous
>> incorrect clock configuration on the RK3036 platform, we should
>> fix them.
> I've applied patches 1-4 as fixes for 4.5 [0] and will apply patch 5
> regularly once 4.5-rc1 is released and I have stable base again.
>
>
>> Xing Zheng (5):
>>    clk: rockchip: rk3036: fix the FLAGs for clock mux
>>    clk: rockchip: rk3036: fix uarts clock error
>>    clk: rockchip: rk3036: fix the div offset for emac clock
>>    clk: rockchip: rk3036: rename emac ext source clock
> please make sure to also update the binding document in such cases.
> I've done it myself for this one.
>
> [for people reading along: the rk3036 clock-driver + binding is new in
> 4.5 so we should be ok to fix the naming before it is actually released]
>
>
> Heiko
>
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/fixes
>
OK, I have updated the rockchip,rk3036-cru.txt and sent a patch to the 
upstream.

Thanks.