From: Lee Jones <lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: kernel@stlinux.com, maxime.coquelin@st.com, ohad@wizery.com, devicetree@vger.kernel.org, Nathan_Lynch@mentor.com, f.fainelli@gmail.com, ludovic.barre@st.com, s-anna@ti.com, Lee Jones <lee.jones@linaro.org> Subject: [PATCH v5 7/7] ARM: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory Date: Tue, 12 Jan 2016 12:46:21 +0000 [thread overview] Message-ID: <1452602781-22424-8-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1452602781-22424-1-git-send-email-lee.jones@linaro.org> Doing so saves quite a bit of code in the driver. For more information on the 'reserved-memory' bindings see: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih407-family.dtsi | 46 +++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 15c20b6..27b8efc 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -15,6 +15,36 @@ #address-cells = <1>; #size-cells = <1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gp0_reserved: rproc@40000000 { + compatible = "shared-dma-pool"; + reg = <0x40000000 0x01000000>; + no-map; + }; + + gp1_reserved: rproc@41000000 { + compatible = "shared-dma-pool"; + reg = <0x41000000 0x01000000>; + no-map; + }; + + audio_reserved: rproc@42000000 { + compatible = "shared-dma-pool"; + reg = <0x42000000 0x01000000>; + no-map; + }; + + dmu_reserved: rproc@43000000 { + compatible = "shared-dma-pool"; + reg = <0x43000000 0x01000000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -651,9 +681,9 @@ status = "okay"; }; - st231_gp0: st231-gp0@40000000 { + st231_gp0: st231-gp0 { compatible = "st,st231-rproc"; - reg = <0x40000000 0x01000000>; + memory-region = <&gp0_reserved>; resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; @@ -661,9 +691,9 @@ st,syscfg = <&syscfg_core 0x22c>; }; - st231_gp1: st231-gp1@41000000 { + st231_gp1: st231-gp1 { compatible = "st,st231-rproc"; - reg = <0x41000000 0x01000000>; + memory-region = <&gp1_reserved>; resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; @@ -671,9 +701,9 @@ st,syscfg = <&syscfg_core 0x220>; }; - st231_audio: st231-audio@42000000 { + st231_audio: st231-audio { compatible = "st,st231-rproc"; - reg = <0x42000000 0x01000000>; + memory-region = <&audio_reserved>; resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; @@ -681,9 +711,9 @@ st,syscfg = <&syscfg_core 0x228>; }; - st231_dmu: st231-dmu@43000000 { + st231_dmu: st231-dmu { compatible = "st,st231-rproc"; - reg = <0x43000000 0x01000000>; + memory-region = <&dmu_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 7/7] ARM: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory Date: Tue, 12 Jan 2016 12:46:21 +0000 [thread overview] Message-ID: <1452602781-22424-8-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1452602781-22424-1-git-send-email-lee.jones@linaro.org> Doing so saves quite a bit of code in the driver. For more information on the 'reserved-memory' bindings see: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih407-family.dtsi | 46 +++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 15c20b6..27b8efc 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -15,6 +15,36 @@ #address-cells = <1>; #size-cells = <1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gp0_reserved: rproc at 40000000 { + compatible = "shared-dma-pool"; + reg = <0x40000000 0x01000000>; + no-map; + }; + + gp1_reserved: rproc at 41000000 { + compatible = "shared-dma-pool"; + reg = <0x41000000 0x01000000>; + no-map; + }; + + audio_reserved: rproc at 42000000 { + compatible = "shared-dma-pool"; + reg = <0x42000000 0x01000000>; + no-map; + }; + + dmu_reserved: rproc at 43000000 { + compatible = "shared-dma-pool"; + reg = <0x43000000 0x01000000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -651,9 +681,9 @@ status = "okay"; }; - st231_gp0: st231-gp0 at 40000000 { + st231_gp0: st231-gp0 { compatible = "st,st231-rproc"; - reg = <0x40000000 0x01000000>; + memory-region = <&gp0_reserved>; resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; @@ -661,9 +691,9 @@ st,syscfg = <&syscfg_core 0x22c>; }; - st231_gp1: st231-gp1 at 41000000 { + st231_gp1: st231-gp1 { compatible = "st,st231-rproc"; - reg = <0x41000000 0x01000000>; + memory-region = <&gp1_reserved>; resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; @@ -671,9 +701,9 @@ st,syscfg = <&syscfg_core 0x220>; }; - st231_audio: st231-audio at 42000000 { + st231_audio: st231-audio { compatible = "st,st231-rproc"; - reg = <0x42000000 0x01000000>; + memory-region = <&audio_reserved>; resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; @@ -681,9 +711,9 @@ st,syscfg = <&syscfg_core 0x228>; }; - st231_dmu: st231-dmu at 43000000 { + st231_dmu: st231-dmu { compatible = "st,st231-rproc"; - reg = <0x43000000 0x01000000>; + memory-region = <&dmu_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; -- 1.9.1
next prev parent reply other threads:[~2016-01-12 12:47 UTC|newest] Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-12 12:46 [PATCH v5 0/7] remoteproc: Add driver for STMicroelectronics platforms Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` [PATCH v5 1/7] remoteproc: debugfs: Check of invalid 'count' value Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` [PATCH v5 2/7] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 14:33 ` Rob Herring 2016-01-12 14:33 ` Rob Herring 2016-01-12 14:33 ` Rob Herring 2016-01-12 14:46 ` Lee Jones 2016-01-12 14:46 ` Lee Jones 2016-03-16 16:39 ` [STLinux Kernel] " Peter Griffin 2016-03-16 16:39 ` Peter Griffin 2016-01-12 12:46 ` [PATCH v5 3/7] remoteproc: debugfs: Add ability to boot remote processor using debugfs Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-03-16 16:44 ` [STLinux Kernel] " Peter Griffin 2016-03-16 16:44 ` Peter Griffin 2016-03-16 16:44 ` Peter Griffin 2016-01-12 12:46 ` [PATCH v5 4/7] remoteproc: Supply controller driver for ST's Remote Processors Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 14:47 ` Lee Jones 2016-01-12 14:47 ` Lee Jones 2016-03-16 16:38 ` [STLinux Kernel] " Peter Griffin 2016-03-16 16:38 ` Peter Griffin 2016-01-12 12:46 ` [PATCH v5 5/7] MAINTAINERS: Add ST's Remote Processor Driver to ARM/STI ARCHITECTURE Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-03-16 16:40 ` [STLinux Kernel] " Peter Griffin 2016-03-16 16:40 ` Peter Griffin 2016-01-12 12:46 ` [PATCH v5 6/7] ARM: STiH407: Add nodes for RemoteProc Lee Jones 2016-01-12 12:46 ` Lee Jones 2016-04-13 22:04 ` Olof Johansson 2016-04-13 22:04 ` Olof Johansson 2016-04-13 22:04 ` Olof Johansson 2016-01-12 12:46 ` Lee Jones [this message] 2016-01-12 12:46 ` [PATCH v5 7/7] ARM: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory Lee Jones 2016-03-16 16:35 ` [STLinux Kernel] " Peter Griffin 2016-03-16 16:35 ` Peter Griffin 2016-03-16 16:35 ` Peter Griffin 2016-03-16 16:55 ` Lee Jones 2016-03-16 16:55 ` Lee Jones 2016-03-16 16:55 ` Lee Jones 2016-03-16 20:10 ` Peter Griffin 2016-03-16 20:10 ` Peter Griffin 2016-03-16 20:10 ` Peter Griffin 2016-03-17 9:05 ` Loic PALLARDY 2016-03-17 9:05 ` Loic PALLARDY 2016-03-17 9:05 ` Loic PALLARDY 2016-03-17 10:18 ` Lee Jones 2016-03-17 10:18 ` Lee Jones 2016-03-17 10:18 ` Lee Jones 2016-01-27 7:31 ` [PATCH v5 0/7] remoteproc: Add driver for STMicroelectronics platforms Lee Jones 2016-01-27 7:31 ` Lee Jones 2016-01-27 7:31 ` Lee Jones 2016-01-27 19:19 ` Bjorn Andersson 2016-01-27 19:19 ` Bjorn Andersson 2016-03-02 15:43 ` Lee Jones 2016-03-02 15:43 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1452602781-22424-8-git-send-email-lee.jones@linaro.org \ --to=lee.jones@linaro.org \ --cc=Nathan_Lynch@mentor.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=kernel@stlinux.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=ludovic.barre@st.com \ --cc=maxime.coquelin@st.com \ --cc=ohad@wizery.com \ --cc=s-anna@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.