All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, marc.zyngier@arm.com,
	mark.rutland@arm.com, timur@codeaurora.org,
	devicetree@vger.kernel.org, cov@codeaurora.org,
	vinod.koul@intel.com, jcm@redhat.com
Cc: shankerd@codeaurora.org, vikrams@codeaurora.org,
	eric.auger@linaro.org, agross@codeaurora.org, arnd@arndb.de,
	linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Sinan Kaya <okaya@codeaurora.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks
Date: Fri, 29 Jan 2016 17:35:09 -0500	[thread overview]
Message-ID: <1454106914-15857-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1454106914-15857-1-git-send-email-okaya@codeaurora.org>

Add debugfs hooks for debugging the execution behavior of the DMA
channel. The debugfs hooks get initialized by the probe function and
uninitialized by the remove function.

A stats file is created in debugfs. The stats file will show the
information about each HIDMA channel as well as each asynchronous job
queued and completed at a given time.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/qcom/Makefile    |   2 +-
 drivers/dma/qcom/hidma.c     |   3 +
 drivers/dma/qcom/hidma.h     |   2 +
 drivers/dma/qcom/hidma_dbg.c | 219 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/qcom/hidma_dbg.c

diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 6bf9267..4bfc38b 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -2,4 +2,4 @@ obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
 obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
 hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
 obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
-hdma-objs        := hidma_ll.o hidma.o
+hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index f8960f1..833db9e 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -681,6 +681,7 @@ static int hidma_probe(struct platform_device *pdev)
 
 	dmadev->irq = chirq;
 	tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+	hidma_debug_init(dmadev);
 	dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
 	platform_set_drvdata(pdev, dmadev);
 	pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -689,6 +690,7 @@ static int hidma_probe(struct platform_device *pdev)
 	return 0;
 
 uninit:
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 dmafree:
 	if (dmadev)
@@ -706,6 +708,7 @@ static int hidma_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(dmadev->ddev.dev);
 	dma_async_device_unregister(&dmadev->ddev);
 	devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 	hidma_free(dmadev);
 
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 1e09d7c..c6b3ae0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -157,4 +157,6 @@ int hidma_ll_uninit(struct hidma_lldev *llhndl);
 irqreturn_t hidma_ll_inthandler(int irq, void *arg);
 void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
 				u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
 #endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..fe35002
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,219 @@
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+static void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+	struct hidma_lldev *lldev = llhndl;
+	struct hidma_tre *tre;
+	u32 length;
+	dma_addr_t src_start;
+	dma_addr_t dest_start;
+	u32 *tre_local;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev, "invalid TRE number in chstats:%d", tre_ch);
+		return;
+	}
+	tre = &lldev->trepool[tre_ch];
+	seq_printf(s, "------Channel %d -----\n", tre_ch);
+	seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+	seq_printf(s, "queued = 0x%x\n", tre->queued);
+	seq_printf(s, "err_info = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_info);
+	seq_printf(s, "err_code = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_code);
+	seq_printf(s, "status = 0x%x\n", tre->status);
+	seq_printf(s, "idx = 0x%x\n", tre->idx);
+	seq_printf(s, "dma_sig = 0x%x\n", tre->dma_sig);
+	seq_printf(s, "dev_name=%s\n", tre->dev_name);
+	seq_printf(s, "callback=%p\n", tre->callback);
+	seq_printf(s, "data=%p\n", tre->data);
+	seq_printf(s, "tre_index = 0x%x\n", tre->tre_index);
+
+	tre_local = &tre->tre_local[0];
+	src_start = tre_local[TRE_SRC_LOW_IDX];
+	src_start = ((u64) (tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+	dest_start = tre_local[TRE_DEST_LOW_IDX];
+	dest_start += ((u64) (tre_local[TRE_DEST_HI_IDX]) << 32);
+	length = tre_local[TRE_LEN_IDX];
+
+	seq_printf(s, "src=%pap\n", &src_start);
+	seq_printf(s, "dest=%pap\n", &dest_start);
+	seq_printf(s, "length = 0x%x\n", length);
+}
+
+static void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+	struct hidma_lldev *lldev = llhndl;
+
+	seq_puts(s, "------Device -----\n");
+	seq_printf(s, "lldev init = 0x%x\n", lldev->initialized);
+	seq_printf(s, "trch_state = 0x%x\n", lldev->trch_state);
+	seq_printf(s, "evch_state = 0x%x\n", lldev->evch_state);
+	seq_printf(s, "chidx = 0x%x\n", lldev->chidx);
+	seq_printf(s, "nr_tres = 0x%x\n", lldev->nr_tres);
+	seq_printf(s, "trca=%p\n", lldev->trca);
+	seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+	seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+	seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size);
+	seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off);
+	seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+	seq_printf(s, "evca=%p\n", lldev->evca);
+	seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+	seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+	seq_printf(s, "evre_ring_size = 0x%x\n", lldev->evre_ring_size);
+	seq_printf(s, "evre_processed_off = 0x%x\n", lldev->evre_processed_off);
+	seq_printf(s, "tre_write_offset = 0x%x\n", lldev->tre_write_offset);
+}
+
+/*
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+	struct hidma_chan *mchan = s->private;
+	struct hidma_desc *mdesc;
+	struct hidma_dev *dmadev = mchan->dmadev;
+
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	seq_printf(s, "paused=%u\n", mchan->paused);
+	seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+	seq_puts(s, "prepared\n");
+	list_for_each_entry(mdesc, &mchan->prepared, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "active\n");
+	list_for_each_entry(mdesc, &mchan->active, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "completed\n");
+	list_for_each_entry(mdesc, &mchan->completed, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	hidma_ll_devstats(s, mchan->dmadev->lldev);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return 0;
+}
+
+/*
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+	struct hidma_dev *dmadev = s->private;
+	resource_size_t sz;
+
+	seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+	seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+	seq_printf(s, "dev_trca_phys=%pa\n", &dmadev->trca_resource->start);
+	sz = resource_size(dmadev->trca_resource);
+	seq_printf(s, "dev_trca_size=%pa\n", &sz);
+	seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+	seq_printf(s, "dev_evca_phys=%pa\n", &dmadev->evca_resource->start);
+	sz = resource_size(dmadev->evca_resource);
+	seq_printf(s, "dev_evca_size=%pa\n", &sz);
+	return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+	.open = hidma_chan_stats_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+	.open = hidma_dma_info_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+	debugfs_remove_recursive(dmadev->debugfs);
+	debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+	int rc = 0;
+	int chidx = 0;
+	struct list_head *position = NULL;
+
+	dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev), NULL);
+	if (!dmadev->debugfs) {
+		rc = -ENODEV;
+		return rc;
+	}
+
+	/* walk through the virtual channel list */
+	list_for_each(position, &dmadev->ddev.channels) {
+		struct hidma_chan *chan;
+
+		chan = list_entry(position, struct hidma_chan,
+				  chan.device_node);
+		sprintf(chan->dbg_name, "chan%d", chidx);
+		chan->debugfs = debugfs_create_dir(chan->dbg_name,
+						   dmadev->debugfs);
+		if (!chan->debugfs) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chan->stats = debugfs_create_file("stats", S_IRUGO,
+						  chan->debugfs, chan,
+						  &hidma_chan_fops);
+		if (!chan->stats) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chidx++;
+	}
+
+	dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+					    dmadev->debugfs, dmadev,
+					    &hidma_dma_fops);
+	if (!dmadev->stats) {
+		rc = -ENOMEM;
+		goto cleanup;
+	}
+
+	return 0;
+cleanup:
+	hidma_debug_uninit(dmadev);
+	return rc;
+}
-- 
1.8.2.1

WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks
Date: Fri, 29 Jan 2016 17:35:09 -0500	[thread overview]
Message-ID: <1454106914-15857-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1454106914-15857-1-git-send-email-okaya@codeaurora.org>

Add debugfs hooks for debugging the execution behavior of the DMA
channel. The debugfs hooks get initialized by the probe function and
uninitialized by the remove function.

A stats file is created in debugfs. The stats file will show the
information about each HIDMA channel as well as each asynchronous job
queued and completed at a given time.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/dma/qcom/Makefile    |   2 +-
 drivers/dma/qcom/hidma.c     |   3 +
 drivers/dma/qcom/hidma.h     |   2 +
 drivers/dma/qcom/hidma_dbg.c | 219 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100644 drivers/dma/qcom/hidma_dbg.c

diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 6bf9267..4bfc38b 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -2,4 +2,4 @@ obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
 obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o
 hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
 obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
-hdma-objs        := hidma_ll.o hidma.o
+hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index f8960f1..833db9e 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -681,6 +681,7 @@ static int hidma_probe(struct platform_device *pdev)
 
 	dmadev->irq = chirq;
 	tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev);
+	hidma_debug_init(dmadev);
 	dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
 	platform_set_drvdata(pdev, dmadev);
 	pm_runtime_mark_last_busy(dmadev->ddev.dev);
@@ -689,6 +690,7 @@ static int hidma_probe(struct platform_device *pdev)
 	return 0;
 
 uninit:
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 dmafree:
 	if (dmadev)
@@ -706,6 +708,7 @@ static int hidma_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(dmadev->ddev.dev);
 	dma_async_device_unregister(&dmadev->ddev);
 	devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev);
+	hidma_debug_uninit(dmadev);
 	hidma_ll_uninit(dmadev->lldev);
 	hidma_free(dmadev);
 
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
index 1e09d7c..c6b3ae0 100644
--- a/drivers/dma/qcom/hidma.h
+++ b/drivers/dma/qcom/hidma.h
@@ -157,4 +157,6 @@ int hidma_ll_uninit(struct hidma_lldev *llhndl);
 irqreturn_t hidma_ll_inthandler(int irq, void *arg);
 void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
 				u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
 #endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..fe35002
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,219 @@
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+static void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+	struct hidma_lldev *lldev = llhndl;
+	struct hidma_tre *tre;
+	u32 length;
+	dma_addr_t src_start;
+	dma_addr_t dest_start;
+	u32 *tre_local;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev, "invalid TRE number in chstats:%d", tre_ch);
+		return;
+	}
+	tre = &lldev->trepool[tre_ch];
+	seq_printf(s, "------Channel %d -----\n", tre_ch);
+	seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+	seq_printf(s, "queued = 0x%x\n", tre->queued);
+	seq_printf(s, "err_info = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_info);
+	seq_printf(s, "err_code = 0x%x\n",
+		   lldev->tx_status_list[tre->idx].err_code);
+	seq_printf(s, "status = 0x%x\n", tre->status);
+	seq_printf(s, "idx = 0x%x\n", tre->idx);
+	seq_printf(s, "dma_sig = 0x%x\n", tre->dma_sig);
+	seq_printf(s, "dev_name=%s\n", tre->dev_name);
+	seq_printf(s, "callback=%p\n", tre->callback);
+	seq_printf(s, "data=%p\n", tre->data);
+	seq_printf(s, "tre_index = 0x%x\n", tre->tre_index);
+
+	tre_local = &tre->tre_local[0];
+	src_start = tre_local[TRE_SRC_LOW_IDX];
+	src_start = ((u64) (tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+	dest_start = tre_local[TRE_DEST_LOW_IDX];
+	dest_start += ((u64) (tre_local[TRE_DEST_HI_IDX]) << 32);
+	length = tre_local[TRE_LEN_IDX];
+
+	seq_printf(s, "src=%pap\n", &src_start);
+	seq_printf(s, "dest=%pap\n", &dest_start);
+	seq_printf(s, "length = 0x%x\n", length);
+}
+
+static void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+	struct hidma_lldev *lldev = llhndl;
+
+	seq_puts(s, "------Device -----\n");
+	seq_printf(s, "lldev init = 0x%x\n", lldev->initialized);
+	seq_printf(s, "trch_state = 0x%x\n", lldev->trch_state);
+	seq_printf(s, "evch_state = 0x%x\n", lldev->evch_state);
+	seq_printf(s, "chidx = 0x%x\n", lldev->chidx);
+	seq_printf(s, "nr_tres = 0x%x\n", lldev->nr_tres);
+	seq_printf(s, "trca=%p\n", lldev->trca);
+	seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+	seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+	seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size);
+	seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off);
+	seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+	seq_printf(s, "evca=%p\n", lldev->evca);
+	seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+	seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+	seq_printf(s, "evre_ring_size = 0x%x\n", lldev->evre_ring_size);
+	seq_printf(s, "evre_processed_off = 0x%x\n", lldev->evre_processed_off);
+	seq_printf(s, "tre_write_offset = 0x%x\n", lldev->tre_write_offset);
+}
+
+/*
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+	struct hidma_chan *mchan = s->private;
+	struct hidma_desc *mdesc;
+	struct hidma_dev *dmadev = mchan->dmadev;
+
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	seq_printf(s, "paused=%u\n", mchan->paused);
+	seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+	seq_puts(s, "prepared\n");
+	list_for_each_entry(mdesc, &mchan->prepared, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "active\n");
+	list_for_each_entry(mdesc, &mchan->active, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "completed\n");
+	list_for_each_entry(mdesc, &mchan->completed, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	hidma_ll_devstats(s, mchan->dmadev->lldev);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return 0;
+}
+
+/*
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+	struct hidma_dev *dmadev = s->private;
+	resource_size_t sz;
+
+	seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+	seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+	seq_printf(s, "dev_trca_phys=%pa\n", &dmadev->trca_resource->start);
+	sz = resource_size(dmadev->trca_resource);
+	seq_printf(s, "dev_trca_size=%pa\n", &sz);
+	seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+	seq_printf(s, "dev_evca_phys=%pa\n", &dmadev->evca_resource->start);
+	sz = resource_size(dmadev->evca_resource);
+	seq_printf(s, "dev_evca_size=%pa\n", &sz);
+	return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+	.open = hidma_chan_stats_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+	.open = hidma_dma_info_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+	debugfs_remove_recursive(dmadev->debugfs);
+	debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+	int rc = 0;
+	int chidx = 0;
+	struct list_head *position = NULL;
+
+	dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev), NULL);
+	if (!dmadev->debugfs) {
+		rc = -ENODEV;
+		return rc;
+	}
+
+	/* walk through the virtual channel list */
+	list_for_each(position, &dmadev->ddev.channels) {
+		struct hidma_chan *chan;
+
+		chan = list_entry(position, struct hidma_chan,
+				  chan.device_node);
+		sprintf(chan->dbg_name, "chan%d", chidx);
+		chan->debugfs = debugfs_create_dir(chan->dbg_name,
+						   dmadev->debugfs);
+		if (!chan->debugfs) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chan->stats = debugfs_create_file("stats", S_IRUGO,
+						  chan->debugfs, chan,
+						  &hidma_chan_fops);
+		if (!chan->stats) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chidx++;
+	}
+
+	dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+					    dmadev->debugfs, dmadev,
+					    &hidma_dma_fops);
+	if (!dmadev->stats) {
+		rc = -ENOMEM;
+		goto cleanup;
+	}
+
+	return 0;
+cleanup:
+	hidma_debug_uninit(dmadev);
+	return rc;
+}
-- 
1.8.2.1

  parent reply	other threads:[~2016-01-29 22:35 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-29 22:35 [PATCH V13 00/10] dma: add Qualcomm Technologies HIDMA driver Sinan Kaya
2016-01-29 22:35 ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 01/10] dma: qcom_bam_dma: move to qcom directory Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 02/10] dma: hidma: Add Device Tree binding Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 03/10] dma: add Qualcomm Technologies HIDMA management driver Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 04/10] dma: add Qualcomm Technologies HIDMA channel driver Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 05/10] dma: qcom_hidma: implement lower level hardware interface Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` Sinan Kaya [this message]
2016-01-29 22:35   ` [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 07/10] dma: qcom_hidma: add support for object hierarchy Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-02-01 15:14   ` Rob Herring
2016-02-01 15:14     ` Rob Herring
2016-02-03 18:32     ` Sinan Kaya
2016-02-03 18:32       ` Sinan Kaya
2016-02-01 15:35   ` Mark Rutland
2016-02-01 15:35     ` Mark Rutland
2016-02-01 15:46     ` Sinan Kaya
2016-02-01 15:46       ` Sinan Kaya
2016-02-03 18:32     ` Sinan Kaya
2016-02-03 18:32       ` Sinan Kaya
2016-02-03 18:32       ` Sinan Kaya
2016-02-03 18:36       ` Mark Rutland
2016-02-03 18:36         ` Mark Rutland
2016-02-03 18:46         ` Sinan Kaya
2016-02-03 18:46           ` Sinan Kaya
2016-02-07 15:04         ` Sinan Kaya
2016-02-07 15:04           ` Sinan Kaya
2016-02-07 15:04           ` Sinan Kaya
2016-02-09 21:01           ` Sinan Kaya
2016-02-09 21:01             ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-01-30 12:52   ` kbuild test robot
2016-01-30 12:52     ` kbuild test robot
2016-01-30 12:52     ` kbuild test robot
2016-01-31 13:53   ` Sinan Kaya
2016-01-31 13:53     ` Sinan Kaya
2016-01-31 13:53     ` Sinan Kaya
2016-02-01 16:08   ` Eric Auger
2016-02-01 16:08     ` Eric Auger
2016-02-01 16:16     ` Sinan Kaya
2016-02-01 16:16       ` Sinan Kaya
2016-02-01 16:29       ` Eric Auger
2016-02-01 16:29         ` Eric Auger
2016-02-01 16:44         ` Sinan Kaya
2016-02-01 16:44           ` Sinan Kaya
2016-02-01 16:49           ` Timur Tabi
2016-02-01 16:49             ` Timur Tabi
2016-02-01 16:56             ` Sinan Kaya
2016-02-01 16:56               ` Sinan Kaya
2016-02-03 18:38         ` Sinan Kaya
2016-02-03 18:38           ` Sinan Kaya
2016-01-29 22:35 ` [PATCH V13 10/10] vfio, platform: add QTI HIDMA " Sinan Kaya
2016-01-29 22:35   ` Sinan Kaya
2016-02-01 15:41   ` Eric Auger
2016-02-01 15:41     ` Eric Auger
2016-02-01 15:41     ` Eric Auger
2016-02-01 15:51     ` Sinan Kaya
2016-02-01 15:51       ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454106914-15857-7-git-send-email-okaya@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=arnd@arndb.de \
    --cc=cov@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=eric.auger@linaro.org \
    --cc=jcm@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=shankerd@codeaurora.org \
    --cc=timur@codeaurora.org \
    --cc=vikrams@codeaurora.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.