[PATCH 1/2] drm/i915/BXT: Fixed COS blanking issue

[Ramalingam C <ramalingam.c@intel.com>]

From: Uma Shankar <uma.shankar@intel.com>

During Charging OS mode, mipi display was blanking.This is
because during driver load, though encoder, connector were
active but crtc returned inactive. This caused sanitize
function to disable the DSI panel. In AOS, this is fine
since HWC will do a modeset and crtc, connector, encoder
mapping will be restored. But in COS, no modeset is called,
it just calls DPMS ON/OFF.

This is fine on BYT/CHT since transcoder is common b/w
all encoders. But for BXT, there is a separate mipi
transcoder. Hence this needs special handling for BXT.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c |  107 ++++++++++++++++++++++++++++++++--
 1 file changed, 101 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a66220a..f8685f5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7814,6 +7814,69 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
 		   (intel_crtc->config->pipe_src_h - 1));
 }
 
+static void intel_get_dsi_pipe_timings(struct intel_crtc *crtc,
+				   struct intel_crtc_state *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+	struct intel_encoder *encoder;
+	uint32_t tmp;
+
+	tmp = I915_READ(HTOTAL(cpu_transcoder));
+	pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
+	pipe_config->base.adjusted_mode.crtc_htotal =
+						((tmp >> 16) & 0xffff) + 1;
+	tmp = I915_READ(HBLANK(cpu_transcoder));
+	pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
+	pipe_config->base.adjusted_mode.crtc_hblank_end =
+						((tmp >> 16) & 0xffff) + 1;
+	tmp = I915_READ(HSYNC(cpu_transcoder));
+	pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
+	pipe_config->base.adjusted_mode.crtc_hsync_end =
+						((tmp >> 16) & 0xffff) + 1;
+
+	tmp = I915_READ(VBLANK(cpu_transcoder));
+	pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
+	pipe_config->base.adjusted_mode.crtc_vblank_end =
+						((tmp >> 16) & 0xffff) + 1;
+	tmp = I915_READ(VSYNC(cpu_transcoder));
+	pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
+	pipe_config->base.adjusted_mode.crtc_vsync_end =
+						((tmp >> 16) & 0xffff) + 1;
+
+	if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
+		pipe_config->base.adjusted_mode.flags |=
+						DRM_MODE_FLAG_INTERLACE;
+		pipe_config->base.adjusted_mode.crtc_vtotal += 1;
+		pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
+	}
+
+
+	for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
+		struct intel_dsi *intel_dsi =
+			enc_to_intel_dsi(&encoder->base);
+		enum port port;
+
+		pipe_config->pipe_bpp = intel_dsi->dsi_bpp;
+		for_each_dsi_port(port, intel_dsi->ports) {
+			pipe_config->base.adjusted_mode.crtc_hdisplay =
+				I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
+			pipe_config->base.adjusted_mode.crtc_vdisplay =
+				I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
+			pipe_config->base.adjusted_mode.crtc_vtotal =
+				I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
+		}
+	}
+
+	tmp = I915_READ(PIPESRC(crtc->pipe));
+	pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
+	pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
+
+	pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
+	pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
+}
+
 static void intel_get_pipe_timings(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config)
 {
@@ -9969,6 +10032,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum intel_display_power_domain pfit_domain;
 	uint32_t tmp;
+	bool is_dsi = false;
 
 	if (!intel_display_power_is_enabled(dev_priv,
 					 POWER_DOMAIN_PIPE(crtc->pipe)))
@@ -9999,17 +10063,48 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 			pipe_config->cpu_transcoder = TRANSCODER_EDP;
 	}
 
+	if (dev_priv->vbt.has_mipi) {
+		enum port port_num = (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA)
+					? PORT_A : PORT_C;
+		uint32_t dsi_ctrl = I915_READ(MIPI_CTRL(port_num));
+
+		tmp = I915_READ(BXT_MIPI_PORT_CTRL(port_num));
+		if (tmp & DPI_ENABLE) {
+			enum pipe trans_dsi_pipe;
+
+			switch (dsi_ctrl & BXT_PIPE_SELECT_MASK) {
+			default:
+				WARN(1, "unknown pipe linked to dsi transcoder\n");
+				return false;
+			case BXT_PIPE_SELECT_A:
+				trans_dsi_pipe = PIPE_A;
+				break;
+			case BXT_PIPE_SELECT_B:
+				trans_dsi_pipe = PIPE_B;
+				break;
+			case BXT_PIPE_SELECT_C:
+				trans_dsi_pipe = PIPE_C;
+				break;
+			}
+
+			if (trans_dsi_pipe == crtc->pipe)
+				is_dsi = true;
+		}
+	}
+
 	if (!intel_display_power_is_enabled(dev_priv,
 			POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
 		return false;
 
-	tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
-	if (!(tmp & PIPECONF_ENABLE))
-		return false;
-
-	haswell_get_ddi_port_state(crtc, pipe_config);
+	if (!is_dsi) {
+		tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
+		if (!(tmp & PIPECONF_ENABLE))
+			return false;
 
-	intel_get_pipe_timings(crtc, pipe_config);
+		haswell_get_ddi_port_state(crtc, pipe_config);
+		intel_get_pipe_timings(crtc, pipe_config);
+	} else
+		intel_get_dsi_pipe_timings(crtc, pipe_config);
 
 	if (INTEL_INFO(dev)->gen >= 9) {
 		skl_init_scalers(dev, crtc, pipe_config);
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx