[PATCH V2 00/12] dtb: amd: Miscelleneous Updates for AMD Seattle DTS

[PATCH V2 00/12] dtb: amd: Miscelleneous Updates for AMD Seattle DTS

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

This patch series contains several updates for the AMD Seattle SOC DTS files.
It also adds new board files for newer Overdrive and Linaro 96boards (Husky)
platforms.

Thanks,
Suravee

Changes from V1 (https://lkml.org/lkml/2016/1/27/1251):
  * Fix duplication in MAINTAINERS file (per Martin review comment)
  * Remove the PCIe SMMU device tree node for now to rework
    (based on the discussion in the thread).

Brijesh Singh (2):
  dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
  dtb: amd: Add KCS device tree node

Suravee Suthikulpanit (9):
  MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
  dtb: amd: Fix DMA ranges in device tree
  dtb: amd: Fix typo in SPI device nodes
  dtb: amd: Misc changes for I2C device nodes
  dtb: amd: Misc changes for SATA device tree nodes
  dtb: amd: Misc changes for GPIO devices
  dtb: amd: Add PERF CCN-504 device tree node
  dtb: amd: Add support for new AMD Overdrive boards
  dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition
    Server board

Tom Lendacky (1):
  dtb: amd: Add AMD XGBE device tree file

 MAINTAINERS                                      |   8 ++
 arch/arm64/boot/dts/amd/Makefile                 |   4 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts |  87 +++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts |  91 ++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi     | 105 +++++++++++++++++---
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi  | 117 +++++++++++++++++++++++
 arch/arm64/boot/dts/amd/husky.dts                |  83 ++++++++++++++++
 7 files changed, 481 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

-- 
2.5.0

[PATCH V2 00/12] dtb: amd: Miscelleneous Updates for AMD Seattle DTS

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

This patch series contains several updates for the AMD Seattle SOC DTS files.
It also adds new board files for newer Overdrive and Linaro 96boards (Husky)
platforms.

Thanks,
Suravee

Changes from V1 (https://lkml.org/lkml/2016/1/27/1251):
  * Fix duplication in MAINTAINERS file (per Martin review comment)
  * Remove the PCIe SMMU device tree node for now to rework
    (based on the discussion in the thread).

Brijesh Singh (2):
  dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
  dtb: amd: Add KCS device tree node

Suravee Suthikulpanit (9):
  MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
  dtb: amd: Fix DMA ranges in device tree
  dtb: amd: Fix typo in SPI device nodes
  dtb: amd: Misc changes for I2C device nodes
  dtb: amd: Misc changes for SATA device tree nodes
  dtb: amd: Misc changes for GPIO devices
  dtb: amd: Add PERF CCN-504 device tree node
  dtb: amd: Add support for new AMD Overdrive boards
  dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition
    Server board

Tom Lendacky (1):
  dtb: amd: Add AMD XGBE device tree file

 MAINTAINERS                                      |   8 ++
 arch/arm64/boot/dts/amd/Makefile                 |   4 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts |  87 +++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts |  91 ++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi     | 105 +++++++++++++++++---
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi  | 117 +++++++++++++++++++++++
 arch/arm64/boot/dts/amd/husky.dts                |  83 ++++++++++++++++
 7 files changed, 481 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

-- 
2.5.0

[PATCH V2 00/12] dtb: amd: Miscelleneous Updates for AMD Seattle DTS

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

This patch series contains several updates for the AMD Seattle SOC DTS files.
It also adds new board files for newer Overdrive and Linaro 96boards (Husky)
platforms.

Thanks,
Suravee

Changes from V1 (https://lkml.org/lkml/2016/1/27/1251):
  * Fix duplication in MAINTAINERS file (per Martin review comment)
  * Remove the PCIe SMMU device tree node for now to rework
    (based on the discussion in the thread).

Brijesh Singh (2):
  dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
  dtb: amd: Add KCS device tree node

Suravee Suthikulpanit (9):
  MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
  dtb: amd: Fix DMA ranges in device tree
  dtb: amd: Fix typo in SPI device nodes
  dtb: amd: Misc changes for I2C device nodes
  dtb: amd: Misc changes for SATA device tree nodes
  dtb: amd: Misc changes for GPIO devices
  dtb: amd: Add PERF CCN-504 device tree node
  dtb: amd: Add support for new AMD Overdrive boards
  dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition
    Server board

Tom Lendacky (1):
  dtb: amd: Add AMD XGBE device tree file

 MAINTAINERS                                      |   8 ++
 arch/arm64/boot/dts/amd/Makefile                 |   4 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts |  87 +++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts |  91 ++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi     | 105 +++++++++++++++++---
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi  | 117 +++++++++++++++++++++++
 arch/arm64/boot/dts/amd/husky.dts                |  83 ++++++++++++++++
 7 files changed, 481 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

-- 
2.5.0

[PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Adding maintainers for AMD Seattle device tree.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F:	drivers/gpu/drm/radeon/radeon_kfd.c
 F:	drivers/gpu/drm/radeon/radeon_kfd.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SEATTLE DEVICE TREE SUPPORT
+M:	Brijesh Singh <brijeshkumar.singh@amd.com>
+M:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M:	Tom Lendacky <thomas.lendacky@amd.com>
+S:	Supported
+F:	arch/arm64/boot/dts/amd/
+
 AMD XGBE DRIVER
 M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
-- 
2.5.0

[PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Adding maintainers for AMD Seattle device tree.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F:	drivers/gpu/drm/radeon/radeon_kfd.c
 F:	drivers/gpu/drm/radeon/radeon_kfd.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SEATTLE DEVICE TREE SUPPORT
+M:	Brijesh Singh <brijeshkumar.singh@amd.com>
+M:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M:	Tom Lendacky <thomas.lendacky@amd.com>
+S:	Supported
+F:	arch/arm64/boot/dts/amd/
+
 AMD XGBE DRIVER
 M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev at vger.kernel.org
-- 
2.5.0

[PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Adding maintainers for AMD Seattle device tree.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F:	drivers/gpu/drm/radeon/radeon_kfd.c
 F:	drivers/gpu/drm/radeon/radeon_kfd.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SEATTLE DEVICE TREE SUPPORT
+M:	Brijesh Singh <brijeshkumar.singh@amd.com>
+M:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M:	Tom Lendacky <thomas.lendacky@amd.com>
+S:	Supported
+F:	arch/arm64/boot/dts/amd/
+
 AMD XGBE DRIVER
 M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
-- 
2.5.0

Re: [PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Olof Johansson]

On Mon, Feb 08, 2016 at 11:59:06AM -0600, Suravee Suthikulpanit wrote:
> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 
> Adding maintainers for AMD Seattle device tree.
> 
> Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>

Thanks, I've applied the series to next/dt64 now.


-Olof

[PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Olof Johansson]

On Mon, Feb 08, 2016 at 11:59:06AM -0600, Suravee Suthikulpanit wrote:
> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 
> Adding maintainers for AMD Seattle device tree.
> 
> Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>

Thanks, I've applied the series to next/dt64 now.


-Olof

Re: [PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

On 02/08/2016 03:38 PM, Olof Johansson wrote:
> On Mon, Feb 08, 2016 at 11:59:06AM -0600, Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>> Adding maintainers for AMD Seattle device tree.
>>
>> Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
>
> Thanks, I've applied the series to next/dt64 now.
>
>
> -Olof
>

Thank you,
Suravee

[PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

On 02/08/2016 03:38 PM, Olof Johansson wrote:
> On Mon, Feb 08, 2016 at 11:59:06AM -0600, Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>> Adding maintainers for AMD Seattle device tree.
>>
>> Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
>
> Thanks, I've applied the series to next/dt64 now.
>
>
> -Olof
>

Thank you,
Suravee

Re: [PATCH V2 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree

[Suravee Suthikulpanit]

On 02/08/2016 03:38 PM, Olof Johansson wrote:
> On Mon, Feb 08, 2016 at 11:59:06AM -0600, Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
>>
>> Adding maintainers for AMD Seattle device tree.
>>
>> Signed-off-by: Brijesh Singh <brijeshkumar.singh-5C7GfCeVMHo@public.gmane.org>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
>> Signed-off-by: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
>
> Thanks, I've applied the series to next/dt64 now.
>
>
> -Olof
>

Thank you,
Suravee
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
 		#size-cells = <2>;
 		reg = <0x0 0xe1110000 0 0x1000>,
 		      <0x0 0xe112f000 0 0x2000>,
-		      <0x0 0xe1140000 0 0x10000>,
-		      <0x0 0xe1160000 0 0x10000>;
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 		ranges = <0 0 0 0xe1100000 0 0x100000>;
 		v2m0: v2m@e0080000 {
-- 
2.5.0

[PATCH V2 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
 		#size-cells = <2>;
 		reg = <0x0 0xe1110000 0 0x1000>,
 		      <0x0 0xe112f000 0 0x2000>,
-		      <0x0 0xe1140000 0 0x10000>,
-		      <0x0 0xe1160000 0 0x10000>;
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 		ranges = <0 0 0 0xe1100000 0 0x100000>;
 		v2m0: v2m at e0080000 {
-- 
2.5.0

[PATCH V2 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
 		#size-cells = <2>;
 		reg = <0x0 0xe1110000 0 0x1000>,
 		      <0x0 0xe112f000 0 0x2000>,
-		      <0x0 0xe1140000 0 0x10000>,
-		      <0x0 0xe1160000 0 0x10000>;
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 		ranges = <0 0 0 0xe1100000 0 0x100000>;
 		v2m0: v2m@e0080000 {
-- 
2.5.0

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* DDR range is 40-bit addressing */
-		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		/include/ "amd-seattle-clks.dtsi"
 
@@ -159,7 +163,7 @@
 				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
 
 			dma-coherent;
-			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
 			ranges =
 				/* I/O Memory (size=64K) */
 				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
-- 
2.5.0

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* DDR range is 40-bit addressing */
-		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		/include/ "amd-seattle-clks.dtsi"
 
@@ -159,7 +163,7 @@
 				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
 
 			dma-coherent;
-			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
 			ranges =
 				/* I/O Memory (size=64K) */
 				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
-- 
2.5.0

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* DDR range is 40-bit addressing */
-		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		/include/ "amd-seattle-clks.dtsi"
 
@@ -159,7 +163,7 @@
 				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
 
 			dma-coherent;
-			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
 			ranges =
 				/* I/O Memory (size=64K) */
 				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
-- 
2.5.0

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Arnd Bergmann]

On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 
> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
> 
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 

This could use a changelog text to explain why it's broken and how the
fix works.

	Arnd

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Arnd Bergmann]

On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 
> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
> 
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> 

This could use a changelog text to explain why it's broken and how the
fix works.

	Arnd

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Hi Arnd,

On 2/9/16 21:57, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>
> This could use a changelog text to explain why it's broken and how the
> fix works.
>
> 	Arnd
>

So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
frame is also considered DMA-able. So, I think it should be included in 
the dma-range specified here. Please let me know if my assumption is 
incorrect. Otherwise, I will include more description in the commit log 
in my next rev.

Thanks,
Suravee

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Hi Arnd,

On 2/9/16 21:57, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>
> This could use a changelog text to explain why it's broken and how the
> fix works.
>
> 	Arnd
>

So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
frame is also considered DMA-able. So, I think it should be included in 
the dma-range specified here. Please let me know if my assumption is 
incorrect. Otherwise, I will include more description in the commit log 
in my next rev.

Thanks,
Suravee

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Hi Arnd,

On 2/9/16 21:57, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>
>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>
>
> This could use a changelog text to explain why it's broken and how the
> fix works.
>
> 	Arnd
>

So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
frame is also considered DMA-able. So, I think it should be included in 
the dma-range specified here. Please let me know if my assumption is 
incorrect. Otherwise, I will include more description in the commit log 
in my next rev.

Thanks,
Suravee

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Arnd Bergmann]

On Thursday 11 February 2016 04:13:50 Suravee Suthikulpanit wrote:
> 
> On 2/9/16 21:57, Arnd Bergmann wrote:
> > On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
> >> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> >>
> >> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
> >>
> >> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> >>
> >
> > This could use a changelog text to explain why it's broken and how the
> > fix works.
> >
> >       Arnd
> >
> 
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
> frame is also considered DMA-able. So, I think it should be included in 
> the dma-range specified here. Please let me know if my assumption is 
> incorrect. Otherwise, I will include more description in the commit log 
> in my next rev.

No, I think this makes sense. Just put a more explanation into the changelog
when those things are not obvious from looking at the change.

	Arnd

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Arnd Bergmann]

On Thursday 11 February 2016 04:13:50 Suravee Suthikulpanit wrote:
> 
> On 2/9/16 21:57, Arnd Bergmann wrote:
> > On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
> >> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> >>
> >> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
> >>
> >> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> >>
> >
> > This could use a changelog text to explain why it's broken and how the
> > fix works.
> >
> >       Arnd
> >
> 
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
> frame is also considered DMA-able. So, I think it should be included in 
> the dma-range specified here. Please let me know if my assumption is 
> incorrect. Otherwise, I will include more description in the commit log 
> in my next rev.

No, I think this makes sense. Just put a more explanation into the changelog
when those things are not obvious from looking at the change.

	Arnd

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Arnd Bergmann]

On Thursday 11 February 2016 04:13:50 Suravee Suthikulpanit wrote:
> 
> On 2/9/16 21:57, Arnd Bergmann wrote:
> > On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
> >> From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
> >>
> >> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
> >>
> >> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
> >>
> >
> > This could use a changelog text to explain why it's broken and how the
> > fix works.
> >
> >       Arnd
> >
> 
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI 
> frame is also considered DMA-able. So, I think it should be included in 
> the dma-range specified here. Please let me know if my assumption is 
> incorrect. Otherwise, I will include more description in the commit log 
> in my next rev.

No, I think this makes sense. Just put a more explanation into the changelog
when those things are not obvious from looking at the change.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Olof Johansson]

Hi,

On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
<Suravee.Suthikulpanit@amd.com> wrote:
> Hi Arnd,
>
>
> On 2/9/16 21:57, Arnd Bergmann wrote:
>>
>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>
>>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>
>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>
>> This could use a changelog text to explain why it's broken and how the
>> fix works.
>>
>>         Arnd
>>
>
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
> is also considered DMA-able. So, I think it should be included in the
> dma-range specified here. Please let me know if my assumption is incorrect.
> Otherwise, I will include more description in the commit log in my next rev.

As I replied when I did it -- I've applied the patches, so respinning
won't work. Instead, please follow up with incremental fixes to this
series instead.


Thanks,

-Olof

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Olof Johansson]

Hi,

On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
<Suravee.Suthikulpanit@amd.com> wrote:
> Hi Arnd,
>
>
> On 2/9/16 21:57, Arnd Bergmann wrote:
>>
>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>
>>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>
>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>
>> This could use a changelog text to explain why it's broken and how the
>> fix works.
>>
>>         Arnd
>>
>
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
> is also considered DMA-able. So, I think it should be included in the
> dma-range specified here. Please let me know if my assumption is incorrect.
> Otherwise, I will include more description in the commit log in my next rev.

As I replied when I did it -- I've applied the patches, so respinning
won't work. Instead, please follow up with incremental fixes to this
series instead.


Thanks,

-Olof

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Olof Johansson]

Hi,

On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
<Suravee.Suthikulpanit@amd.com> wrote:
> Hi Arnd,
>
>
> On 2/9/16 21:57, Arnd Bergmann wrote:
>>
>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>
>>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>
>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>
>>
>> This could use a changelog text to explain why it's broken and how the
>> fix works.
>>
>>         Arnd
>>
>
> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
> is also considered DMA-able. So, I think it should be included in the
> dma-range specified here. Please let me know if my assumption is incorrect.
> Otherwise, I will include more description in the commit log in my next rev.

As I replied when I did it -- I've applied the patches, so respinning
won't work. Instead, please follow up with incremental fixes to this
series instead.


Thanks,

-Olof

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Ok, I'll send the incremental patch out again.

Thanks,
Suravee

On 2/12/16 04:23, Olof Johansson wrote:
> Hi,
>
> On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
> <Suravee.Suthikulpanit@amd.com> wrote:
>> Hi Arnd,
>>
>>
>> On 2/9/16 21:57, Arnd Bergmann wrote:
>>>
>>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>>
>>>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>>
>>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>>
>>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>>
>>>
>>> This could use a changelog text to explain why it's broken and how the
>>> fix works.
>>>
>>>          Arnd
>>>
>>
>> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
>> is also considered DMA-able. So, I think it should be included in the
>> dma-range specified here. Please let me know if my assumption is incorrect.
>> Otherwise, I will include more description in the commit log in my next rev.
>
> As I replied when I did it -- I've applied the patches, so respinning
> won't work. Instead, please follow up with incremental fixes to this
> series instead.
>
>
> Thanks,
>
> -Olof
>

[PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Ok, I'll send the incremental patch out again.

Thanks,
Suravee

On 2/12/16 04:23, Olof Johansson wrote:
> Hi,
>
> On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
> <Suravee.Suthikulpanit@amd.com> wrote:
>> Hi Arnd,
>>
>>
>> On 2/9/16 21:57, Arnd Bergmann wrote:
>>>
>>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>>
>>>> From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>>
>>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>>
>>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>>>>
>>>
>>> This could use a changelog text to explain why it's broken and how the
>>> fix works.
>>>
>>>          Arnd
>>>
>>
>> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
>> is also considered DMA-able. So, I think it should be included in the
>> dma-range specified here. Please let me know if my assumption is incorrect.
>> Otherwise, I will include more description in the commit log in my next rev.
>
> As I replied when I did it -- I've applied the patches, so respinning
> won't work. Instead, please follow up with incremental fixes to this
> series instead.
>
>
> Thanks,
>
> -Olof
>

Re: [PATCH V2 03/12] dtb: amd: Fix DMA ranges in device tree

[Suravee Suthikulpanit]

Ok, I'll send the incremental patch out again.

Thanks,
Suravee

On 2/12/16 04:23, Olof Johansson wrote:
> Hi,
>
> On Wed, Feb 10, 2016 at 1:13 PM, Suravee Suthikulpanit
> <Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org> wrote:
>> Hi Arnd,
>>
>>
>> On 2/9/16 21:57, Arnd Bergmann wrote:
>>>
>>> On Monday 08 February 2016 11:59:08 Suravee Suthikulpanit wrote:
>>>>
>>>> From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
>>>>
>>>> Fix DMA ranges of smb0 and pcie0 nodes in AMD Seattle SOC.
>>>>
>>>> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
>>>>
>>>
>>> This could use a changelog text to explain why it's broken and how the
>>> fix works.
>>>
>>>          Arnd
>>>
>>
>> So, I have not experience the breakage. However, IIUC, the GICv2m MSI frame
>> is also considered DMA-able. So, I think it should be included in the
>> dma-range specified here. Please let me know if my assumption is incorrect.
>> Otherwise, I will include more description in the commit log in my next rev.
>
> As I replied when I did it -- I've applied the patches, so respinning
> won't work. Instead, please follow up with incremental fixes to this
> series instead.
>
>
> Thanks,
>
> -Olof
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 04/12] dtb: amd: Fix typo in SPI device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Remove invalid entry in the SPI device nodes.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
 		spi0: ssp@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
 		spi1: ssp@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
-- 
2.5.0

[PATCH V2 04/12] dtb: amd: Fix typo in SPI device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Remove invalid entry in the SPI device nodes.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
 		spi0: ssp at e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
 		spi1: ssp at e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
-- 
2.5.0

[PATCH V2 04/12] dtb: amd: Fix typo in SPI device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Remove invalid entry in the SPI device nodes.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
 		spi0: ssp@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
 		spi1: ssp@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
-- 
2.5.0

[PATCH V2 05/12] dtb: amd: Misc changes for I2C device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new i2c1 device node, and fix the incorrect clock frequency.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
 			compatible = "snps,designware-i2c";
 			reg = <0 0xe1000000 0 0x1000>;
 			interrupts = <0 357 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
 		};
 
 		serial0: serial@e1010000 {
-- 
2.5.0

[PATCH V2 05/12] dtb: amd: Misc changes for I2C device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new i2c1 device node, and fix the incorrect clock frequency.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
 			compatible = "snps,designware-i2c";
 			reg = <0 0xe1000000 0 0x1000>;
 			interrupts = <0 357 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c at e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
 		};
 
 		serial0: serial at e1010000 {
-- 
2.5.0

[PATCH V2 05/12] dtb: amd: Misc changes for I2C device nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>

Add new i2c1 device node, and fix the incorrect clock frequency.

Signed-off-by: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
 			compatible = "snps,designware-i2c";
 			reg = <0 0xe1000000 0 0x1000>;
 			interrupts = <0 357 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
 		};
 
 		serial0: serial@e1010000 {
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 06/12] dtb: amd: Misc changes for SATA device tree nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new SATA1 device node, and fix the register range size of SATA0.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
 
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0 0xe0300000 0 0x800>;
+			reg = <0 0xe0300000 0 0xf0000>;
 			interrupts = <0 355 4>;
 			clocks = <&sataclk_333mhz>;
 			dma-coherent;
 		};
 
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
 		i2c0: i2c@e1000000 {
 			status = "disabled";
 			compatible = "snps,designware-i2c";
-- 
2.5.0

[PATCH V2 06/12] dtb: amd: Misc changes for SATA device tree nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new SATA1 device node, and fix the register range size of SATA0.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
 
 		sata0: sata at e0300000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0 0xe0300000 0 0x800>;
+			reg = <0 0xe0300000 0 0xf0000>;
 			interrupts = <0 355 4>;
 			clocks = <&sataclk_333mhz>;
 			dma-coherent;
 		};
 
+		/* This is for Rev B only */
+		sata1: sata at e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
 		i2c0: i2c at e1000000 {
 			status = "disabled";
 			compatible = "snps,designware-i2c";
-- 
2.5.0

[PATCH V2 06/12] dtb: amd: Misc changes for SATA device tree nodes

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>

Add new SATA1 device node, and fix the register range size of SATA0.

Signed-off-by: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
 
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0 0xe0300000 0 0x800>;
+			reg = <0 0xe0300000 0 0xf0000>;
 			interrupts = <0 355 4>;
 			clocks = <&sataclk_333mhz>;
 			dma-coherent;
 		};
 
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
 		i2c0: i2c@e1000000 {
 			status = "disabled";
 			compatible = "snps,designware-i2c";
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 07/12] dtb: amd: Misc changes for GPIO devices

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new GPIO device nodes and fix clock on gpio0.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
 			#size-cells = <0>;
 		};
 
-		gpio0: gpio@e1040000 {
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
@@ -138,18 +138,59 @@
 			interrupts = <0 359 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-		gpio1: gpio@e1050000 {
+		gpio1: gpio@e1050000 { /* [0:7] */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
 			reg = <0 0xe1050000 0 0x1000>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <0 358 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-- 
2.5.0

[PATCH V2 07/12] dtb: amd: Misc changes for GPIO devices

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new GPIO device nodes and fix clock on gpio0.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
 			#size-cells = <0>;
 		};
 
-		gpio0: gpio at e1040000 {
+		gpio0: gpio at e1040000 { /* Not available to OS for B0 */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
@@ -138,18 +138,59 @@
 			interrupts = <0 359 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-		gpio1: gpio at e1050000 {
+		gpio1: gpio at e1050000 { /* [0:7] */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
 			reg = <0 0xe1050000 0 0x1000>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <0 358 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio at e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio at e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio at e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-- 
2.5.0

[PATCH V2 07/12] dtb: amd: Misc changes for GPIO devices

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add new GPIO device nodes and fix clock on gpio0.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
 			#size-cells = <0>;
 		};
 
-		gpio0: gpio@e1040000 {
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
@@ -138,18 +138,59 @@
 			interrupts = <0 359 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-		gpio1: gpio@e1050000 {
+		gpio1: gpio@e1050000 { /* [0:7] */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
 			reg = <0 0xe1050000 0 0x1000>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <0 358 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-- 
2.5.0

[PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add PERF CCN-504 device tree node.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..c5461b2 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
 				/* 64-bit MMIO (size= 124G) */
 				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
 		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@0xe8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
 	};
 };
-- 
2.5.0

[PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add PERF CCN-504 device tree node.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..c5461b2 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
 				/* 64-bit MMIO (size= 124G) */
 				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
 		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn at 0xe8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
 	};
 };
-- 
2.5.0

[PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add PERF CCN-504 device tree node.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..c5461b2 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
 				/* 64-bit MMIO (size= 124G) */
 				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
 		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@0xe8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
 	};
 };
-- 
2.5.0

Re: [PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Arnd Bergmann]

On Monday 08 February 2016 11:59:13 Suravee Suthikulpanit wrote:
> +               /* Perf CCN504 PMU */
> +               ccn: ccn@0xe8000000 {
> 

The address is wrong, please remove the '0x'.

	Arnd

[PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Arnd Bergmann]

On Monday 08 February 2016 11:59:13 Suravee Suthikulpanit wrote:
> +               /* Perf CCN504 PMU */
> +               ccn: ccn at 0xe8000000 {
> 

The address is wrong, please remove the '0x'.

	Arnd

Re: [PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

On 02/09/2016 08:58 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:13 Suravee Suthikulpanit wrote:
>> +               /* Perf CCN504 PMU */
>> +               ccn: ccn@0xe8000000 {
>>
>
> The address is wrong, please remove the '0x'.
>
> 	Arnd
>

Right, thanks for catching this.

Suravee

[PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

On 02/09/2016 08:58 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:13 Suravee Suthikulpanit wrote:
>> +               /* Perf CCN504 PMU */
>> +               ccn: ccn at 0xe8000000 {
>>
>
> The address is wrong, please remove the '0x'.
>
> 	Arnd
>

Right, thanks for catching this.

Suravee

Re: [PATCH V2 08/12] dtb: amd: Add PERF CCN-504 device tree node

[Suravee Suthikulpanit]

On 02/09/2016 08:58 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:13 Suravee Suthikulpanit wrote:
>> +               /* Perf CCN504 PMU */
>> +               ccn: ccn@0xe8000000 {
>>
>
> The address is wrong, please remove the '0x'.
>
> 	Arnd
>

Right, thanks for catching this.

Suravee
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

Add KCS device node to support IPMI solution on Overdrive
system.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c5461b2..a7fc059 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,16 @@
 			reg = <0x0 0xe8000000 0 0x1000000>;
 			interrupts = <0 380 4>;
 		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			interrupt-names = "ipmi_kcs";
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
 	};
 };
-- 
2.5.0

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

Add KCS device node to support IPMI solution on Overdrive
system.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c5461b2..a7fc059 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,16 @@
 			reg = <0x0 0xe8000000 0 0x1000000>;
 			interrupts = <0 380 4>;
 		};
+
+		ipmi_kcs: kcs at e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			interrupt-names = "ipmi_kcs";
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
 	};
 };
-- 
2.5.0

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Suravee Suthikulpanit]

From: Brijesh Singh <brijeshkumar.singh@amd.com>

Add KCS device node to support IPMI solution on Overdrive
system.

Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c5461b2..a7fc059 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,16 @@
 			reg = <0x0 0xe8000000 0 0x1000000>;
 			interrupts = <0 380 4>;
 		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			interrupt-names = "ipmi_kcs";
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
 	};
 };
-- 
2.5.0

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Arnd Bergmann]

On Monday 08 February 2016 11:59:14 Suravee Suthikulpanit wrote:
> +
> +               ipmi_kcs: kcs@e0010000 {
> +                       status = "disabled";
> +                       compatible = "ipmi-kcs";
> +                       device_type = "ipmi";
> +                       reg = <0x0 0xe0010000 0 0x8>;
> +                       interrupts = <0 389 4>;
> +                       interrupt-names = "ipmi_kcs";
> +                       reg-size = <1>;
> +                       reg-spacing = <4>;
> +               };
>         };
> 

I see we don't have a binding file for this, can you add one please?


Why the strange name for the interrupt?

	Arnd

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Arnd Bergmann]

On Monday 08 February 2016 11:59:14 Suravee Suthikulpanit wrote:
> +
> +               ipmi_kcs: kcs at e0010000 {
> +                       status = "disabled";
> +                       compatible = "ipmi-kcs";
> +                       device_type = "ipmi";
> +                       reg = <0x0 0xe0010000 0 0x8>;
> +                       interrupts = <0 389 4>;
> +                       interrupt-names = "ipmi_kcs";
> +                       reg-size = <1>;
> +                       reg-spacing = <4>;
> +               };
>         };
> 

I see we don't have a binding file for this, can you add one please?


Why the strange name for the interrupt?

	Arnd

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 08:59 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:14 Suravee Suthikulpanit wrote:
>> +
>> +               ipmi_kcs: kcs@e0010000 {
>> +                       status = "disabled";
>> +                       compatible = "ipmi-kcs";
>> +                       device_type = "ipmi";
>> +                       reg = <0x0 0xe0010000 0 0x8>;
>> +                       interrupts = <0 389 4>;
>> +                       interrupt-names = "ipmi_kcs";
>> +                       reg-size = <1>;
>> +                       reg-spacing = <4>;
>> +               };
>>         };
>>
> 
> I see we don't have a binding file for this, can you add one please?
>
There is binding file ipmi.txt [1]. Am I missing something ?
 
[1] http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/ipmi.txt

> 
> Why the strange name for the interrupt?
> 

Now I don't remember the doc but sometime back while implementing BMC on Seattle I saw that interrupt was labeled as "ipmi_kcs"
hence used the same name in DT. But if you want to use different name then let me know the string and will update it.

Theoretically IPMI system interface supports the following interface and any of these interfaces can be used by
A57 to communicate with BMC:

* Keyboard controller style (KCS)
* System Management Interface (SMIC)
* Block transfer (BT)
* SMBus system interface (SSIF)

AMD Seattle platform supports "KCS".



> 	Arnd
> 

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 08:59 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:14 Suravee Suthikulpanit wrote:
>> +
>> +               ipmi_kcs: kcs at e0010000 {
>> +                       status = "disabled";
>> +                       compatible = "ipmi-kcs";
>> +                       device_type = "ipmi";
>> +                       reg = <0x0 0xe0010000 0 0x8>;
>> +                       interrupts = <0 389 4>;
>> +                       interrupt-names = "ipmi_kcs";
>> +                       reg-size = <1>;
>> +                       reg-spacing = <4>;
>> +               };
>>         };
>>
> 
> I see we don't have a binding file for this, can you add one please?
>
There is binding file ipmi.txt [1]. Am I missing something ?
 
[1] http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/ipmi.txt

> 
> Why the strange name for the interrupt?
> 

Now I don't remember the doc but sometime back while implementing BMC on Seattle I saw that interrupt was labeled as "ipmi_kcs"
hence used the same name in DT. But if you want to use different name then let me know the string and will update it.

Theoretically IPMI system interface supports the following interface and any of these interfaces can be used by
A57 to communicate with BMC:

* Keyboard controller style (KCS)
* System Management Interface (SMIC)
* Block transfer (BT)
* SMBus system interface (SSIF)

AMD Seattle platform supports "KCS".



> 	Arnd
> 

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 08:59 AM, Arnd Bergmann wrote:
> On Monday 08 February 2016 11:59:14 Suravee Suthikulpanit wrote:
>> +
>> +               ipmi_kcs: kcs@e0010000 {
>> +                       status = "disabled";
>> +                       compatible = "ipmi-kcs";
>> +                       device_type = "ipmi";
>> +                       reg = <0x0 0xe0010000 0 0x8>;
>> +                       interrupts = <0 389 4>;
>> +                       interrupt-names = "ipmi_kcs";
>> +                       reg-size = <1>;
>> +                       reg-spacing = <4>;
>> +               };
>>         };
>>
> 
> I see we don't have a binding file for this, can you add one please?
>
There is binding file ipmi.txt [1]. Am I missing something ?
 
[1] http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/ipmi.txt

> 
> Why the strange name for the interrupt?
> 

Now I don't remember the doc but sometime back while implementing BMC on Seattle I saw that interrupt was labeled as "ipmi_kcs"
hence used the same name in DT. But if you want to use different name then let me know the string and will update it.

Theoretically IPMI system interface supports the following interface and any of these interfaces can be used by
A57 to communicate with BMC:

* Keyboard controller style (KCS)
* System Management Interface (SMIC)
* Block transfer (BT)
* SMBus system interface (SSIF)

AMD Seattle platform supports "KCS".



> 	Arnd
> 

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Arnd Bergmann]

On Tuesday 09 February 2016 09:47:55 Brijesh Singh wrote:
> > 
> > I see we don't have a binding file for this, can you add one please?
> >
> There is binding file ipmi.txt [1]. Am I missing something ?
>  
> [1] http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/ipmi.txt

Sorry, my mistake: I was looking for "ipmi_kcs", which is not in there.

> > 
> > Why the strange name for the interrupt?
> > 
> 
> Now I don't remember the doc but sometime back while implementing BMC on Seattle I saw that interrupt was labeled as "ipmi_kcs"
> hence used the same name in DT. But if you want to use different name then let me know the string and will update it.
> 
> Theoretically IPMI system interface supports the following interface and any of these interfaces can be used by
> A57 to communicate with BMC:
> 
> * Keyboard controller style (KCS)
> * System Management Interface (SMIC)
> * Block transfer (BT)
> * SMBus system interface (SSIF)
> 
> AMD Seattle platform supports "KCS".
> 

The important part for interrupt/reg/... names is that you must use exactly the
names that are listed in the binding. If there is no name in there, it's better
not to add the name property.

The other point is that "ipmi_kcs" is a name that is picked really badly, as it
uses a '_' character while DT properties by convention use '-' between names,
and the name of the IRQ is the same as the device itself, which is really
not a useful way to disambiguate multiple interrupts in the same device, if
someone ever adds another irq line.

	Arnd

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Arnd Bergmann]

On Tuesday 09 February 2016 09:47:55 Brijesh Singh wrote:
> > 
> > I see we don't have a binding file for this, can you add one please?
> >
> There is binding file ipmi.txt [1]. Am I missing something ?
>  
> [1] http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/ipmi.txt

Sorry, my mistake: I was looking for "ipmi_kcs", which is not in there.

> > 
> > Why the strange name for the interrupt?
> > 
> 
> Now I don't remember the doc but sometime back while implementing BMC on Seattle I saw that interrupt was labeled as "ipmi_kcs"
> hence used the same name in DT. But if you want to use different name then let me know the string and will update it.
> 
> Theoretically IPMI system interface supports the following interface and any of these interfaces can be used by
> A57 to communicate with BMC:
> 
> * Keyboard controller style (KCS)
> * System Management Interface (SMIC)
> * Block transfer (BT)
> * SMBus system interface (SSIF)
> 
> AMD Seattle platform supports "KCS".
> 

The important part for interrupt/reg/... names is that you must use exactly the
names that are listed in the binding. If there is no name in there, it's better
not to add the name property.

The other point is that "ipmi_kcs" is a name that is picked really badly, as it
uses a '_' character while DT properties by convention use '-' between names,
and the name of the IRQ is the same as the device itself, which is really
not a useful way to disambiguate multiple interrupts in the same device, if
someone ever adds another irq line.

	Arnd

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 10:00 AM, Arnd Bergmann wrote:
> 
> The important part for interrupt/reg/... names is that you must use exactly the
> names that are listed in the binding. If there is no name in there, it's better
> not to add the name property.
> 
> The other point is that "ipmi_kcs" is a name that is picked really badly, as it
> uses a '_' character while DT properties by convention use '-' between names,
> and the name of the IRQ is the same as the device itself, which is really
> not a useful way to disambiguate multiple interrupts in the same device, if
> someone ever adds another irq line.
> 

Sure we will drop the name field. Thanks.

> 	Arnd
> 

[PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 10:00 AM, Arnd Bergmann wrote:
> 
> The important part for interrupt/reg/... names is that you must use exactly the
> names that are listed in the binding. If there is no name in there, it's better
> not to add the name property.
> 
> The other point is that "ipmi_kcs" is a name that is picked really badly, as it
> uses a '_' character while DT properties by convention use '-' between names,
> and the name of the IRQ is the same as the device itself, which is really
> not a useful way to disambiguate multiple interrupts in the same device, if
> someone ever adds another irq line.
> 

Sure we will drop the name field. Thanks.

> 	Arnd
> 

Re: [PATCH V2 09/12] dtb: amd: Add KCS device tree node

[Brijesh Singh]

Hi,

On 02/09/2016 10:00 AM, Arnd Bergmann wrote:
> 
> The important part for interrupt/reg/... names is that you must use exactly the
> names that are listed in the binding. If there is no name in there, it's better
> not to add the name property.
> 
> The other point is that "ipmi_kcs" is a name that is picked really badly, as it
> uses a '_' character while DT properties by convention use '-' between names,
> and the name of the IRQ is the same as the device itself, which is really
> not a useful way to disambiguate multiple interrupts in the same device, if
> someone ever adds another irq line.
> 

Sure we will drop the name field. Thanks.

> 	Arnd
> 

[PATCH V2 10/12] dtb: amd: Add AMD XGBE device tree file

[Suravee Suthikulpanit]

From: Tom Lendacky <thomas.lendacky@amd.com>

Add AMD XGBE device tree file, which is available in AMD Seattle RevB.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS                                     |   1 +
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
 2 files changed, 118 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi

diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/amd/xgbe/
+F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 
 AMS (Apple Motion Sensor) DRIVER
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac0_smmu: smmu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+
+		 mmu-masters = <&xgmac0
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
+
+	 xgmac1_smmu: smmu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+
+		 mmu-masters = <&xgmac1
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
-- 
2.5.0

[PATCH V2 10/12] dtb: amd: Add AMD XGBE device tree file

[Suravee Suthikulpanit]

From: Tom Lendacky <thomas.lendacky@amd.com>

Add AMD XGBE device tree file, which is available in AMD Seattle RevB.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS                                     |   1 +
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
 2 files changed, 118 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi

diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev at vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/amd/xgbe/
+F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 
 AMS (Apple Motion Sensor) DRIVER
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac at e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac1: xgmac at e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac0_smmu: smmu at e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+
+		 mmu-masters = <&xgmac0
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
+
+	 xgmac1_smmu: smmu at e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+
+		 mmu-masters = <&xgmac1
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
-- 
2.5.0

[PATCH V2 10/12] dtb: amd: Add AMD XGBE device tree file

[Suravee Suthikulpanit]

From: Tom Lendacky <thomas.lendacky@amd.com>

Add AMD XGBE device tree file, which is available in AMD Seattle RevB.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 MAINTAINERS                                     |   1 +
 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
 2 files changed, 118 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi

diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M:	Tom Lendacky <thomas.lendacky@amd.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/amd/xgbe/
+F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 
 AMS (Apple Motion Sensor) DRIVER
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac0_smmu: smmu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+
+		 mmu-masters = <&xgmac0
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
+
+	 xgmac1_smmu: smmu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+
+		 mmu-masters = <&xgmac1
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
-- 
2.5.0

[PATCH V2 11/12] dtb: amd: Add support for new AMD Overdrive boards

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile                 |  3 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
 3 files changed, 180 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0

[PATCH V2 11/12] dtb: amd: Add support for new AMD Overdrive boards

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile                 |  3 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
 3 files changed, 180 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard at 0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard at 0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0

[PATCH V2 11/12] dtb: amd: Add support for new AMD Overdrive boards

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile                 |  3 +-
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
 3 files changed, 180 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
 create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0

[PATCH V2 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system

Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile  |  3 +-
 arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
-			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+			husky.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0

[PATCH V2 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system

Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile  |  3 +-
 arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
-			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+			husky.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard at 0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0

[PATCH V2 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board

[Suravee Suthikulpanit]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system

Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/arm64/boot/dts/amd/Makefile  |  3 +-
 arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amd/husky.dts

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
-			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+			husky.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
-- 
2.5.0