All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Baker <linux@baker-net.org.uk>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@free-electrons.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Russell King <linux@arm.linux.org.uk>,
	Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	lm-sensors@lm-sensors.org, Rob Herring <robh+dt@kernel.org>,
	Kumar Gala <galak@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU
Date: Wed, 10 Feb 2016 23:33:41 +0000	[thread overview]
Message-ID: <1455147224-6742-1-git-send-email-linux@baker-net.org.uk> (raw)

This patch series adds a driver to support the hardware monitoring MCU
that is present in some models of the Zyxel NSA3xx series of NAS units.

A patch is included to add it to the device tree for the NSA320 model,
patches to the other device trees will be included if testers come
forward (I already have a possible tester for NSA325).

There are no dependencies between the patches so I guess the first two
should go via the hardware monitoring maintainers and the third via
the ARM mvebu maintainers.

 [PATCH 1/3] Define a binding for the hardware monitoring chip present
 [PATCH 2/3] Create a driver to support the hardware monitoring chip
 [PATCH 3/3] Add an entry for the hardware monitoring MCU

 Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt |  21 ++++++++
 arch/arm/boot/dts/kirkwood-nsa320.dts                  |  13 ++++-
 drivers/hwmon/Kconfig                                  |  13 +++++
 drivers/hwmon/Makefile                                 |   1 +
 drivers/hwmon/nsa3xx-hwmon.c                           | 223 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 269 insertions(+), 2 deletions(-)

WARNING: multiple messages have this Message-ID (diff)
From: linux@baker-net.org.uk (Adam Baker)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU
Date: Wed, 10 Feb 2016 23:33:41 +0000	[thread overview]
Message-ID: <1455147224-6742-1-git-send-email-linux@baker-net.org.uk> (raw)

This patch series adds a driver to support the hardware monitoring MCU
that is present in some models of the Zyxel NSA3xx series of NAS units.

A patch is included to add it to the device tree for the NSA320 model,
patches to the other device trees will be included if testers come
forward (I already have a possible tester for NSA325).

There are no dependencies between the patches so I guess the first two
should go via the hardware monitoring maintainers and the third via
the ARM mvebu maintainers.

 [PATCH 1/3] Define a binding for the hardware monitoring chip present
 [PATCH 2/3] Create a driver to support the hardware monitoring chip
 [PATCH 3/3] Add an entry for the hardware monitoring MCU

 Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt |  21 ++++++++
 arch/arm/boot/dts/kirkwood-nsa320.dts                  |  13 ++++-
 drivers/hwmon/Kconfig                                  |  13 +++++
 drivers/hwmon/Makefile                                 |   1 +
 drivers/hwmon/nsa3xx-hwmon.c                           | 223 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 269 insertions(+), 2 deletions(-)

             reply	other threads:[~2016-02-10 23:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-10 23:33 Adam Baker [this message]
2016-02-10 23:33 ` [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU Adam Baker
2016-02-10 23:33 ` [PATCH 1/3] ARM: mvebu: Define binding for the nsa3xx-hwmon driver Adam Baker
2016-02-10 23:33   ` Adam Baker
     [not found]   ` <1455147224-6742-2-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
2016-02-12 15:59     ` Rob Herring
2016-02-12 15:59       ` Rob Herring
2016-02-10 23:33 ` [PATCH 2/3] ARM: mvebu: Create a NSA3xx hardware monitoring driver Adam Baker
2016-02-10 23:33   ` Adam Baker
     [not found]   ` <1455147224-6742-3-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
2016-02-13  2:35     ` Guenter Roeck
2016-02-13  2:35       ` Guenter Roeck
2016-02-15 23:08       ` Adam Baker
2016-02-15 23:08         ` Adam Baker
2016-02-10 23:33 ` [PATCH 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree Adam Baker
2016-02-10 23:33   ` Adam Baker
     [not found] ` <1455147224-6742-1-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
2016-02-12 16:35   ` [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU Gregory CLEMENT
2016-02-12 16:35     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455147224-6742-1-git-send-email-linux@baker-net.org.uk \
    --to=linux@baker-net.org.uk \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gregory.clement@free-electrons.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jason@lakedaemon.net \
    --cc=jdelvare@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.