From: Adam Baker <linux@baker-net.org.uk> To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@free-electrons.com>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Russell King <linux@arm.linux.org.uk>, Pawel Moll <pawel.moll@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Adam Baker <linux@baker-net.org.uk>, lm-sensors@lm-sensors.org, Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree Date: Wed, 10 Feb 2016 23:33:44 +0000 [thread overview] Message-ID: <1455147224-6742-4-git-send-email-linux@baker-net.org.uk> (raw) In-Reply-To: <1455147224-6742-1-git-send-email-linux@baker-net.org.uk> Add an entry for the hardware monitoring MCU Signed-off-by: Adam Baker <linux@baker-net.org.uk> --- arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d..2a935e9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -193,10 +193,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ }; -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: linux@baker-net.org.uk (Adam Baker) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree Date: Wed, 10 Feb 2016 23:33:44 +0000 [thread overview] Message-ID: <1455147224-6742-4-git-send-email-linux@baker-net.org.uk> (raw) In-Reply-To: <1455147224-6742-1-git-send-email-linux@baker-net.org.uk> Add an entry for the hardware monitoring MCU Signed-off-by: Adam Baker <linux@baker-net.org.uk> --- arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d..2a935e9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -193,10 +193,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ }; -- 2.1.4
next prev parent reply other threads:[~2016-02-10 23:33 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-10 23:33 [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU Adam Baker 2016-02-10 23:33 ` Adam Baker 2016-02-10 23:33 ` [PATCH 1/3] ARM: mvebu: Define binding for the nsa3xx-hwmon driver Adam Baker 2016-02-10 23:33 ` Adam Baker [not found] ` <1455147224-6742-2-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org> 2016-02-12 15:59 ` Rob Herring 2016-02-12 15:59 ` Rob Herring 2016-02-10 23:33 ` [PATCH 2/3] ARM: mvebu: Create a NSA3xx hardware monitoring driver Adam Baker 2016-02-10 23:33 ` Adam Baker [not found] ` <1455147224-6742-3-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org> 2016-02-13 2:35 ` Guenter Roeck 2016-02-13 2:35 ` Guenter Roeck 2016-02-15 23:08 ` Adam Baker 2016-02-15 23:08 ` Adam Baker 2016-02-10 23:33 ` Adam Baker [this message] 2016-02-10 23:33 ` [PATCH 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree Adam Baker [not found] ` <1455147224-6742-1-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org> 2016-02-12 16:35 ` [PATCH 0/3] ARM: mvebu: Add driver for the Zyxel NSA3XX hwmon MCU Gregory CLEMENT 2016-02-12 16:35 ` Gregory CLEMENT
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1455147224-6742-4-git-send-email-linux@baker-net.org.uk \ --to=linux@baker-net.org.uk \ --cc=andrew@lunn.ch \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=gregory.clement@free-electrons.com \ --cc=ijc+devicetree@hellion.org.uk \ --cc=jason@lakedaemon.net \ --cc=jdelvare@suse.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux@arm.linux.org.uk \ --cc=linux@roeck-us.net \ --cc=lm-sensors@lm-sensors.org \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.