From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Tony Lindgren <tony@atomide.com>, <paul@pwsan.com>, <robh+dt@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 01/11] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm
Date: Thu, 25 Feb 2016 16:50:17 +0200 [thread overview]
Message-ID: <1456411827-23962-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1456411827-23962-1-git-send-email-peter.ujfalusi@ti.com>
Move the sDMA xbar nodes under the L4 interconnect node.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8ea153aa46f6..114286dbee25 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -161,6 +161,15 @@
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
+
+ sdma_xbar: dma-router@b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xb78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
};
cm_core_aon: cm_core_aon@5000 {
@@ -315,15 +324,6 @@
dma-requests = <127>;
};
- sdma_xbar: dma-router@4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
- };
-
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
--
2.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: Tero Kristo <t-kristo-l0cyMroinI0@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 01/11] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm
Date: Thu, 25 Feb 2016 16:50:17 +0200 [thread overview]
Message-ID: <1456411827-23962-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1456411827-23962-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
Move the sDMA xbar nodes under the L4 interconnect node.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/dra7.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8ea153aa46f6..114286dbee25 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -161,6 +161,15 @@
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
+
+ sdma_xbar: dma-router@b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xb78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
};
cm_core_aon: cm_core_aon@5000 {
@@ -315,15 +324,6 @@
dma-requests = <127>;
};
- sdma_xbar: dma-router@4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
- };
-
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
--
2.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/11] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm
Date: Thu, 25 Feb 2016 16:50:17 +0200 [thread overview]
Message-ID: <1456411827-23962-2-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1456411827-23962-1-git-send-email-peter.ujfalusi@ti.com>
Move the sDMA xbar nodes under the L4 interconnect node.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8ea153aa46f6..114286dbee25 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -161,6 +161,15 @@
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
+
+ sdma_xbar: dma-router at b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0xb78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
};
cm_core_aon: cm_core_aon at 5000 {
@@ -315,15 +324,6 @@
dma-requests = <127>;
};
- sdma_xbar: dma-router at 4a002b78 {
- compatible = "ti,dra7-dma-crossbar";
- reg = <0x4a002b78 0xfc>;
- #dma-cells = <1>;
- dma-requests = <205>;
- ti,dma-safe-map = <0>;
- dma-masters = <&sdma>;
- };
-
gpio1: gpio at 4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
--
2.7.1
next prev parent reply other threads:[~2016-02-25 14:51 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 14:50 [PATCH 00/11] ARM: DTS/clk: DRA7 family: enable eDMA and audio updates Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi [this message]
2016-02-25 14:50 ` [PATCH 01/11] ARM: DTS: dra7: Move the sDMA crossbar node under l4_cfg/scm Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 02/11] ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-03-01 8:55 ` Paul Walmsley
2016-03-01 8:55 ` Paul Walmsley
2016-03-01 8:55 ` Paul Walmsley
2016-02-25 14:50 ` [PATCH 03/11] ARM: DTS: dra7: Enable eDMA Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 04/11] ARM: DTS: dra7: Use eDMA and add DAT port address for McASP3 Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 05/11] ARM: DTS: dra7-evm: Enable AFIFO use " Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 06/11] ARM: DTS: dra72-evm: " Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 07/11] ARM: DTS: am57xx-beagle-x15: Move clkout2 source selection to codec node Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 08/11] ARM: DTS: am57xx-beagle-x15: Enable AFIFO use for McASP3 Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 09/11] ARM: clk: dra7xx: Correct mcasp8_ahclkx_mux name Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` [PATCH 10/11] ARM: DRA7: hwmod: Add data for McASP1/2/4/5/6/7/8 Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-03-01 9:11 ` Paul Walmsley
2016-03-01 9:11 ` Paul Walmsley
2016-03-01 16:43 ` Peter Ujfalusi
2016-03-01 16:43 ` Peter Ujfalusi
2016-03-01 16:43 ` Peter Ujfalusi
2016-03-01 17:01 ` Paul Walmsley
2016-03-01 17:01 ` Paul Walmsley
2016-03-03 11:13 ` Peter Ujfalusi
2016-03-03 11:13 ` Peter Ujfalusi
2016-03-03 11:13 ` Peter Ujfalusi
2016-03-03 15:38 ` Paul Walmsley
2016-03-03 15:38 ` Paul Walmsley
2016-03-03 15:38 ` Paul Walmsley
2016-02-25 14:50 ` [PATCH 11/11] ARM: DTS: dra7: Add nodes " Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
2016-02-25 14:50 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456411827-23962-2-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.