From: Alexandre TORGUE <alexandre.torgue@gmail.com> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, Giuseppe Cavallaro <peppe.cavallaro@st.com>, netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v3 0/4] Add Ethernet support on STM32F429 Date: Fri, 26 Feb 2016 11:51:48 +0100 [thread overview] Message-ID: <1456483912-32090-1-git-send-email-alexandre.torgue@gmail.com> (raw) STM32F429 Chip embeds a Synopsys 3.50a MAC IP. This series: -enhance current stmmac driver to control it (code already available) and adds basic glue for STM32F429 chip. -Enable basic Net config in kernel. Note that DT patches are not present because STM32 pinctrl code is not yet avalaible. Changes since v2: -Fix alphabetic order in Kconfig and Makefile. -Improve code according to Joachim review. -Binding: remove useless entry. Changes since v1: -Fix Kbuild issue in Kconfig. -Remove init/exit callbacks. Suspend/Resume and remove driver is no more driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. -Take into account Joachim review. Regards. Alexandre. Alexandre TORGUE (4): net: ethernet: dwmac: add Ethernet glue logic for stm32 chip Documentation: Bindings: Add STM32 DWMAC glue net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP ARM: STM32: Enable Ethernet in stm32_defconfig .../devicetree/bindings/net/stm32-dwmac.txt | 40 +++++ arch/arm/configs/stm32_defconfig | 9 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 193 +++++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 6 files changed, 256 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.torgue@gmail.com (Alexandre TORGUE) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/4] Add Ethernet support on STM32F429 Date: Fri, 26 Feb 2016 11:51:48 +0100 [thread overview] Message-ID: <1456483912-32090-1-git-send-email-alexandre.torgue@gmail.com> (raw) STM32F429 Chip embeds a Synopsys 3.50a MAC IP. This series: -enhance current stmmac driver to control it (code already available) and adds basic glue for STM32F429 chip. -Enable basic Net config in kernel. Note that DT patches are not present because STM32 pinctrl code is not yet avalaible. Changes since v2: -Fix alphabetic order in Kconfig and Makefile. -Improve code according to Joachim review. -Binding: remove useless entry. Changes since v1: -Fix Kbuild issue in Kconfig. -Remove init/exit callbacks. Suspend/Resume and remove driver is no more driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. -Take into account Joachim review. Regards. Alexandre. Alexandre TORGUE (4): net: ethernet: dwmac: add Ethernet glue logic for stm32 chip Documentation: Bindings: Add STM32 DWMAC glue net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP ARM: STM32: Enable Ethernet in stm32_defconfig .../devicetree/bindings/net/stm32-dwmac.txt | 40 +++++ arch/arm/configs/stm32_defconfig | 9 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 193 +++++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 6 files changed, 256 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c -- 1.9.1
next reply other threads:[~2016-02-26 10:52 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-26 10:51 Alexandre TORGUE [this message] 2016-02-26 10:51 ` [PATCH v3 0/4] Add Ethernet support on STM32F429 Alexandre TORGUE 2016-02-26 10:51 ` [PATCH v3 1/4] net: ethernet: dwmac: add Ethernet glue logic for stm32 chip Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-02-26 18:08 ` Joachim Eastwood 2016-02-26 18:08 ` Joachim Eastwood 2016-02-26 18:08 ` Joachim Eastwood 2016-02-26 10:51 ` [PATCH v3 2/4] Documentation: Bindings: Add STM32 DWMAC glue Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-02-26 17:57 ` Joachim Eastwood 2016-02-26 17:57 ` Joachim Eastwood 2016-02-26 17:57 ` Joachim Eastwood 2016-03-02 18:33 ` Rob Herring 2016-03-02 18:33 ` Rob Herring 2016-03-04 9:04 ` Alexandre Torgue 2016-03-04 9:04 ` Alexandre Torgue 2016-02-26 10:51 ` [PATCH v3 3/4] net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-02-26 10:51 ` [PATCH v3 4/4] ARM: STM32: Enable Ethernet in stm32_defconfig Alexandre TORGUE 2016-02-26 10:51 ` Alexandre TORGUE 2016-03-01 17:36 ` Maxime Coquelin 2016-03-01 17:36 ` Maxime Coquelin 2016-03-01 17:36 ` Maxime Coquelin 2016-02-29 9:36 ` [PATCH v3 0/4] Add Ethernet support on STM32F429 Giuseppe CAVALLARO 2016-02-29 9:36 ` Giuseppe CAVALLARO 2016-02-29 9:36 ` Giuseppe CAVALLARO
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1456483912-32090-1-git-send-email-alexandre.torgue@gmail.com \ --to=alexandre.torgue@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=peppe.cavallaro@st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.