From: Yunhui Cui <B56489@freescale.com> To: <dwmw2@infradead.org>, <computersforpeace@gmail.com>, <han.xu@freescale.com> Cc: <linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>, <linux-arm-kernel@lists.infradead.org>, <yao.yuan@nxp.com>, Yunhui Cui <yunhui.cui@nxp.com> Subject: [PATCH v2 3/9] mtd: spi-nor: fsl-quadspi: add fast-read mode support Date: Fri, 22 Apr 2016 14:39:46 +0800 [thread overview] Message-ID: <1461307192-866-3-git-send-email-B56489@freescale.com> (raw) In-Reply-To: <1461307192-866-1-git-send-email-B56489@freescale.com> From: Yunhui Cui <yunhui.cui@nxp.com> The qspi driver add generic fast-read mode for different flash venders. There are some different board flash work on different mode, such fast-read, quad-mode. Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> --- drivers/mtd/spi-nor/fsl-quadspi.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 9861290..09adaa4 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -389,11 +389,21 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Read */ lut_base = SEQID_READ * 4; - qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | - LUT1(FSL_READ, PAD4, rxfifo), - base + QUADSPI_LUT(lut_base + 1)); + if (nor->flash_read == SPI_NOR_FAST) { + qspi_writel(q, LUT0(CMD, PAD1, read_op) | + LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD1, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + } else if (nor->flash_read == SPI_NOR_QUAD) { + qspi_writel(q, LUT0(CMD, PAD1, read_op) | + LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + } /* Write enable */ lut_base = SEQID_WREN * 4; @@ -468,6 +478,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { case SPINOR_OP_READ_1_1_4: + case SPINOR_OP_READ_FAST: return SEQID_READ; case SPINOR_OP_WREN: return SEQID_WREN; -- 2.1.0.27.g96db324
WARNING: multiple messages have this Message-ID (diff)
From: B56489@freescale.com (Yunhui Cui) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/9] mtd: spi-nor: fsl-quadspi: add fast-read mode support Date: Fri, 22 Apr 2016 14:39:46 +0800 [thread overview] Message-ID: <1461307192-866-3-git-send-email-B56489@freescale.com> (raw) In-Reply-To: <1461307192-866-1-git-send-email-B56489@freescale.com> From: Yunhui Cui <yunhui.cui@nxp.com> The qspi driver add generic fast-read mode for different flash venders. There are some different board flash work on different mode, such fast-read, quad-mode. Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> --- drivers/mtd/spi-nor/fsl-quadspi.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 9861290..09adaa4 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -389,11 +389,21 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Read */ lut_base = SEQID_READ * 4; - qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | - LUT1(FSL_READ, PAD4, rxfifo), - base + QUADSPI_LUT(lut_base + 1)); + if (nor->flash_read == SPI_NOR_FAST) { + qspi_writel(q, LUT0(CMD, PAD1, read_op) | + LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD1, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + } else if (nor->flash_read == SPI_NOR_QUAD) { + qspi_writel(q, LUT0(CMD, PAD1, read_op) | + LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + } /* Write enable */ lut_base = SEQID_WREN * 4; @@ -468,6 +478,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { case SPINOR_OP_READ_1_1_4: + case SPINOR_OP_READ_FAST: return SEQID_READ; case SPINOR_OP_WREN: return SEQID_WREN; -- 2.1.0.27.g96db324
next prev parent reply other threads:[~2016-04-22 6:49 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-22 6:39 [PATCH v2 1/9] mtd:fsl-quadspi:use the property fields of SPI-NOR Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui [this message] 2016-04-22 6:39 ` [PATCH v2 3/9] mtd: spi-nor: fsl-quadspi: add fast-read mode support Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 4/9] mtd: spi-nor: fsl-quadspi: extend support for some special requerment Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 5/9] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 6/9] mtd: spi-nor: Support R/W for S25FS-S family flash Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-07-21 19:35 ` Han Xu 2016-07-21 19:35 ` Han Xu 2016-08-06 14:27 ` Jagan Teki 2016-08-06 14:27 ` Jagan Teki 2016-08-06 14:27 ` Jagan Teki 2016-08-17 8:57 ` Yunhui Cui 2016-08-17 8:57 ` Yunhui Cui 2016-08-17 8:57 ` Yunhui Cui 2016-08-15 18:02 ` Li Yang 2016-08-15 18:02 ` Li Yang 2016-08-15 18:02 ` Li Yang 2016-08-17 9:07 ` Yunhui Cui 2016-08-17 9:07 ` Yunhui Cui 2016-08-17 9:07 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 7/9] mtd: fsl-quadspi: Solve Micron Spansion flash command conflict Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-04-22 6:39 ` [PATCH v2 9/9] mtd: fsl-quadspi: add multi flash chip R/W on ls2080a Yunhui Cui 2016-04-22 6:39 ` Yunhui Cui 2016-06-30 1:54 ` [PATCH v2 1/9] mtd:fsl-quadspi:use the property fields of SPI-NOR Yunhui Cui 2016-06-30 1:54 ` Yunhui Cui 2016-06-30 1:54 ` Yunhui Cui 2016-07-21 5:58 ` Yunhui Cui 2016-07-21 5:58 ` Yunhui Cui 2016-07-21 5:58 ` Yunhui Cui 2016-07-21 17:09 ` Brian Norris 2016-07-21 17:09 ` Brian Norris 2016-07-21 17:09 ` Brian Norris 2016-07-21 19:34 ` Han Xu 2016-07-21 19:34 ` Han Xu 2016-07-21 19:34 ` Han Xu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1461307192-866-3-git-send-email-B56489@freescale.com \ --to=b56489@freescale.com \ --cc=computersforpeace@gmail.com \ --cc=dwmw2@infradead.org \ --cc=han.xu@freescale.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=yao.yuan@nxp.com \ --cc=yunhui.cui@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.