From: Andreas Dannenberg <dannenberg@ti.com> To: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org> Cc: Andreas Dannenberg <dannenberg@ti.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v3 1/2] ASoC: codecs: add TA5720 digital amplifier DT bindings Date: Mon, 25 Apr 2016 15:17:35 -0500 [thread overview] Message-ID: <1461615456-19510-2-git-send-email-dannenberg@ti.com> (raw) In-Reply-To: <1461615456-19510-1-git-send-email-dannenberg@ti.com> The Texas Instruments TAS5720L/M device is a high-efficiency mono Class-D audio power amplifier optimized for high transient power capability to use the dynamic power headroom of small loudspeakers. Its digital time division multiplexed (TDM) interface enables up to 16 devices to share the same bus. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> --- .../devicetree/bindings/sound/tas5720.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas5720.txt diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt new file mode 100644 index 0000000..439451e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -0,0 +1,26 @@ +Texas Instruments TAS5720 Mono Audio amplifier + +The TAS5720 serial control bus communicates through the I2C protocol only. The +serial bus is also used for periodic codec fault checking/reporting during +audio playback. For more product information please see the links below: + +http://www.ti.com/product/TAS5720L +http://www.ti.com/product/TAS5720M + +Required properties: + +- compatible : "ti,tas5720" +- reg : I2C slave address + +Optional properties: + +- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry +- pvdd-supply : phandle to a supply used for the Class-D amp and the analog + +Example: + +tas5720: tas5720@6c { + status = "okay"; + compatible = "ti,tas5720"; + reg = <0x6c>; +}; -- 2.6.4
WARNING: multiple messages have this Message-ID (diff)
From: Andreas Dannenberg <dannenberg@ti.com> To: alsa-devel@alsa-project.org, devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com>, Pawel Moll <pawel.moll@arm.com>, Liam Girdwood <lgirdwood@gmail.com>, linux-kernel@vger.kernel.org, Ian Campbell <ijc+devicetree@hellion.org.uk>, Takashi Iwai <tiwai@suse.com>, Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>, Kumar Gala <galak@codeaurora.org>, Andreas Dannenberg <dannenberg@ti.com> Subject: [PATCH v3 1/2] ASoC: codecs: add TA5720 digital amplifier DT bindings Date: Mon, 25 Apr 2016 15:17:35 -0500 [thread overview] Message-ID: <1461615456-19510-2-git-send-email-dannenberg@ti.com> (raw) In-Reply-To: <1461615456-19510-1-git-send-email-dannenberg@ti.com> The Texas Instruments TAS5720L/M device is a high-efficiency mono Class-D audio power amplifier optimized for high transient power capability to use the dynamic power headroom of small loudspeakers. Its digital time division multiplexed (TDM) interface enables up to 16 devices to share the same bus. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> --- .../devicetree/bindings/sound/tas5720.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas5720.txt diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt new file mode 100644 index 0000000..439451e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -0,0 +1,26 @@ +Texas Instruments TAS5720 Mono Audio amplifier + +The TAS5720 serial control bus communicates through the I2C protocol only. The +serial bus is also used for periodic codec fault checking/reporting during +audio playback. For more product information please see the links below: + +http://www.ti.com/product/TAS5720L +http://www.ti.com/product/TAS5720M + +Required properties: + +- compatible : "ti,tas5720" +- reg : I2C slave address + +Optional properties: + +- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry +- pvdd-supply : phandle to a supply used for the Class-D amp and the analog + +Example: + +tas5720: tas5720@6c { + status = "okay"; + compatible = "ti,tas5720"; + reg = <0x6c>; +}; -- 2.6.4
next prev parent reply other threads:[~2016-04-25 20:18 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-25 20:17 [PATCH v3 0/2] ASoC: codecs: add support for TAS5720 digital amplifier Andreas Dannenberg 2016-04-25 20:17 ` Andreas Dannenberg 2016-04-25 20:17 ` Andreas Dannenberg [this message] 2016-04-25 20:17 ` [PATCH v3 1/2] ASoC: codecs: add TA5720 digital amplifier DT bindings Andreas Dannenberg 2016-04-26 15:37 ` Mark Brown 2016-04-26 15:37 ` Mark Brown 2016-04-26 16:14 ` Andreas Dannenberg 2016-04-26 16:14 ` Andreas Dannenberg 2016-04-26 16:50 ` Mark Brown 2016-04-26 16:50 ` Mark Brown 2016-04-26 17:00 ` Andreas Dannenberg 2016-04-26 17:00 ` Andreas Dannenberg 2016-04-25 20:17 ` [PATCH v3 2/2] ASoC: codecs: add support for TAS5720 digital amplifier Andreas Dannenberg 2016-04-25 20:17 ` Andreas Dannenberg 2016-04-26 15:43 ` Mark Brown 2016-04-26 15:43 ` Mark Brown 2016-04-26 16:22 ` Andreas Dannenberg 2016-04-26 16:22 ` Andreas Dannenberg 2016-04-26 17:29 ` Mark Brown 2016-04-26 17:29 ` Mark Brown 2016-04-26 18:01 ` Andreas Dannenberg 2016-04-26 18:01 ` Andreas Dannenberg 2016-05-13 11:55 ` Mark Brown 2016-05-13 14:04 ` Andreas Dannenberg 2016-05-13 14:04 ` Andreas Dannenberg 2016-04-26 17:19 ` Andrew F. Davis 2016-04-26 17:19 ` Andrew F. Davis 2016-04-26 17:37 ` Andreas Dannenberg 2016-04-26 17:37 ` Andreas Dannenberg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1461615456-19510-2-git-send-email-dannenberg@ti.com \ --to=dannenberg@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=perex@perex.cz \ --cc=robh+dt@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.