* [U-Boot] [PATCH 0/2] Prepare U-Boot for more Amlogic boards
@ 2016-06-09 14:45 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: u-boot
From: Carlo Caione <carlo@endlessm.com>
Refactor the Odroid-C2 support code to prepare U-Boot for more Amlogic board
submissions.
The goal is to reduce the redundancy of the configuration files and unify all
the board support files onto a single amlogic directory.
Carlo Caione (2):
configs: gxbb: Introduce a common config header file
board: amlogic: Rename folder for Amlogic boards
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/odroid-c2/Kconfig | 12 ++++++
board/amlogic/odroid-c2/MAINTAINERS | 6 +++
board/amlogic/odroid-c2/Makefile | 7 ++++
board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
board/hardkernel/odroid-c2/Kconfig | 12 ------
board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
board/hardkernel/odroid-c2/Makefile | 7 ----
board/hardkernel/odroid-c2/README | 60 ------------------------------
board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++
include/configs/odroid-c2.h | 34 +----------------
13 files changed, 199 insertions(+), 186 deletions(-)
create mode 100644 board/amlogic/odroid-c2/Kconfig
create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
create mode 100644 board/amlogic/odroid-c2/Makefile
create mode 100644 board/amlogic/odroid-c2/README
create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
delete mode 100644 board/hardkernel/odroid-c2/Kconfig
delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
delete mode 100644 board/hardkernel/odroid-c2/Makefile
delete mode 100644 board/hardkernel/odroid-c2/README
delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
create mode 100644 include/configs/meson-gxbb-common.h
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 0/2] Prepare U-Boot for more Amlogic boards
@ 2016-06-09 14:45 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: linus-amlogic
From: Carlo Caione <carlo@endlessm.com>
Refactor the Odroid-C2 support code to prepare U-Boot for more Amlogic board
submissions.
The goal is to reduce the redundancy of the configuration files and unify all
the board support files onto a single amlogic directory.
Carlo Caione (2):
configs: gxbb: Introduce a common config header file
board: amlogic: Rename folder for Amlogic boards
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/odroid-c2/Kconfig | 12 ++++++
board/amlogic/odroid-c2/MAINTAINERS | 6 +++
board/amlogic/odroid-c2/Makefile | 7 ++++
board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
board/hardkernel/odroid-c2/Kconfig | 12 ------
board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
board/hardkernel/odroid-c2/Makefile | 7 ----
board/hardkernel/odroid-c2/README | 60 ------------------------------
board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++
include/configs/odroid-c2.h | 34 +----------------
13 files changed, 199 insertions(+), 186 deletions(-)
create mode 100644 board/amlogic/odroid-c2/Kconfig
create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
create mode 100644 board/amlogic/odroid-c2/Makefile
create mode 100644 board/amlogic/odroid-c2/README
create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
delete mode 100644 board/hardkernel/odroid-c2/Kconfig
delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
delete mode 100644 board/hardkernel/odroid-c2/Makefile
delete mode 100644 board/hardkernel/odroid-c2/README
delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
create mode 100644 include/configs/meson-gxbb-common.h
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 1/2] configs: gxbb: Introduce a common config header file
2016-06-09 14:45 ` Carlo Caione
@ 2016-06-09 14:45 ` Carlo Caione
-1 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: u-boot
From: Carlo Caione <carlo@endlessm.com>
Introduce a meson-gxbb-common.h header file and derive the
configuration for Hardkernel Odroid-C2 board from that.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++
include/configs/odroid-c2.h | 34 +---------------------------
2 files changed, 46 insertions(+), 33 deletions(-)
create mode 100644 include/configs/meson-gxbb-common.h
diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h
new file mode 100644
index 0000000..d1c0050
--- /dev/null
+++ b/include/configs/meson-gxbb-common.h
@@ -0,0 +1,45 @@
+/*
+ * Configuration for Amlogic Meson GXBB SoCs
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MESON_GXBB_COMMON_CONFIG_H
+#define __MESON_GXBB_COMMON_CONFIG_H
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xc4301000
+#define GICC_BASE 0xc4302000
+
+#define CONFIG_CMD_ENV
+
+/* Monitor Command Prompt */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#include <config_distro_defaults.h>
+
+#endif /* __MESON_GXBB_COMMON_CONFIG_H */
diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h
index 37a5671..bf5df9c 100644
--- a/include/configs/odroid-c2.h
+++ b/include/configs/odroid-c2.h
@@ -8,44 +8,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_CPU_ARMV8
-#define CONFIG_REMAKE_ELF
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_MALLOC_LEN (32 << 20)
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
-
-/* Generic Interrupt Controller Definitions */
-#define GICD_BASE 0xc4301000
-#define GICC_BASE 0xc4302000
-
#define CONFIG_IDENT_STRING " odroid-c2"
/* Serial setup */
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
-#define CONFIG_CMD_ENV
-
-/* Monitor Command Prompt */
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-#include <config_distro_defaults.h>
+#include <configs/meson-gxbb-common.h>
#endif /* __CONFIG_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/2] configs: gxbb: Introduce a common config header file
@ 2016-06-09 14:45 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: linus-amlogic
From: Carlo Caione <carlo@endlessm.com>
Introduce a meson-gxbb-common.h header file and derive the
configuration for Hardkernel Odroid-C2 board from that.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++
include/configs/odroid-c2.h | 34 +---------------------------
2 files changed, 46 insertions(+), 33 deletions(-)
create mode 100644 include/configs/meson-gxbb-common.h
diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h
new file mode 100644
index 0000000..d1c0050
--- /dev/null
+++ b/include/configs/meson-gxbb-common.h
@@ -0,0 +1,45 @@
+/*
+ * Configuration for Amlogic Meson GXBB SoCs
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MESON_GXBB_COMMON_CONFIG_H
+#define __MESON_GXBB_COMMON_CONFIG_H
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_TEXT_BASE 0x01000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xc4301000
+#define GICC_BASE 0xc4302000
+
+#define CONFIG_CMD_ENV
+
+/* Monitor Command Prompt */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#include <config_distro_defaults.h>
+
+#endif /* __MESON_GXBB_COMMON_CONFIG_H */
diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h
index 37a5671..bf5df9c 100644
--- a/include/configs/odroid-c2.h
+++ b/include/configs/odroid-c2.h
@@ -8,44 +8,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_CPU_ARMV8
-#define CONFIG_REMAKE_ELF
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_MALLOC_LEN (32 << 20)
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
-
-/* Generic Interrupt Controller Definitions */
-#define GICD_BASE 0xc4301000
-#define GICC_BASE 0xc4302000
-
#define CONFIG_IDENT_STRING " odroid-c2"
/* Serial setup */
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
-#define CONFIG_CMD_ENV
-
-/* Monitor Command Prompt */
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-#include <config_distro_defaults.h>
+#include <configs/meson-gxbb-common.h>
#endif /* __CONFIG_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
2016-06-09 14:45 ` Carlo Caione
@ 2016-06-09 14:45 ` Carlo Caione
-1 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: u-boot
From: Carlo Caione <carlo@endlessm.com>
s/hardkernel/amlogic/ to have a single place for all the amlogic-based
boards.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/odroid-c2/Kconfig | 12 ++++++
board/amlogic/odroid-c2/MAINTAINERS | 6 +++
board/amlogic/odroid-c2/Makefile | 7 ++++
board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
board/hardkernel/odroid-c2/Kconfig | 12 ------
board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
board/hardkernel/odroid-c2/Makefile | 7 ----
board/hardkernel/odroid-c2/README | 60 ------------------------------
board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
11 files changed, 153 insertions(+), 153 deletions(-)
create mode 100644 board/amlogic/odroid-c2/Kconfig
create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
create mode 100644 board/amlogic/odroid-c2/Makefile
create mode 100644 board/amlogic/odroid-c2/README
create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
delete mode 100644 board/hardkernel/odroid-c2/Kconfig
delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
delete mode 100644 board/hardkernel/odroid-c2/Makefile
delete mode 100644 board/hardkernel/odroid-c2/README
delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 77d3cfe..af3be59 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -26,6 +26,6 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x1000
-source "board/hardkernel/odroid-c2/Kconfig"
+source "board/amlogic/odroid-c2/Kconfig"
endif
diff --git a/board/amlogic/odroid-c2/Kconfig b/board/amlogic/odroid-c2/Kconfig
new file mode 100644
index 0000000..2b16889
--- /dev/null
+++ b/board/amlogic/odroid-c2/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ODROID_C2
+
+config SYS_BOARD
+ default "odroid-c2"
+
+config SYS_VENDOR
+ default "amlogic"
+
+config SYS_CONFIG_NAME
+ default "odroid-c2"
+
+endif
diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS
new file mode 100644
index 0000000..699850f
--- /dev/null
+++ b/board/amlogic/odroid-c2/MAINTAINERS
@@ -0,0 +1,6 @@
+ODROID-C2
+M: Beniamino Galvani <b.galvani@gmail.com>
+S: Maintained
+F: board/amlogic/odroid-c2/
+F: include/configs/odroid-c2.h
+F: configs/odroid-c2_defconfig
diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/odroid-c2/Makefile
new file mode 100644
index 0000000..571044b
--- /dev/null
+++ b/board/amlogic/odroid-c2/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := odroid-c2.o
diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README
new file mode 100644
index 0000000..d6d266a
--- /dev/null
+++ b/board/amlogic/odroid-c2/README
@@ -0,0 +1,60 @@
+U-Boot for ODROID-C2
+====================
+
+ODROID-C2 is a single board computer manufactured by Hardkernel
+Co. Ltd with the following specifications:
+
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 40-pin GPIO header
+ - 4 x USB 2.0 Host, 1 x USB OTG
+ - eMMC, microSD
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - Ethernet
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make odroid-c2_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > DIR=odroid-c2
+ > git clone --depth 1 \
+ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
+ $DIR
+ > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
+ --bl301 $DIR/fip/gxb/bl301.bin \
+ --bl31 $DIR/fip/gxb/bl31.bin \
+ --bl33 u-boot.bin \
+ $DIR/fip.bin
+ > $DIR/fip/fip_create --dump $DIR/fip.bin
+ > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
+ > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
+ --input $DIR/boot_new.bin \
+ --output $DIR/u-boot.img
+ > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > BL1=$DIR/sd_fuse/bl1.bin.hardkernel
+ > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
+ > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
+ > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97
diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
new file mode 100644
index 0000000..bd72100
--- /dev/null
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/sm.h>
+#include <dm/platdata.h>
+#include <phy.h>
+
+#define EFUSE_SN_OFFSET 20
+#define EFUSE_SN_SIZE 16
+#define EFUSE_MAC_OFFSET 52
+#define EFUSE_MAC_SIZE 6
+
+int board_init(void)
+{
+ return 0;
+}
+
+static const struct eth_pdata gxbb_eth_pdata = {
+ .iobase = GXBB_ETH_BASE,
+ .phy_interface = PHY_INTERFACE_MODE_RGMII,
+};
+
+U_BOOT_DEVICE(meson_eth) = {
+ .name = "eth_designware",
+ .platdata = &gxbb_eth_pdata,
+};
+
+int misc_init_r(void)
+{
+ u8 mac_addr[EFUSE_MAC_SIZE];
+ ssize_t len;
+
+ /* Select Ethernet function */
+ setbits_le32(GXBB_PINMUX(6), 0x3fff);
+
+ /* Set RGMII mode */
+ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+ GXBB_ETH_REG_0_TX_PHASE(1) |
+ GXBB_ETH_REG_0_TX_RATIO(4) |
+ GXBB_ETH_REG_0_PHY_CLK_EN |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+ /* Reset PHY on GPIOZ_14 */
+ clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
+ clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ mdelay(10);
+ setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+ mac_addr, EFUSE_MAC_SIZE);
+ if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ return 0;
+}
diff --git a/board/hardkernel/odroid-c2/Kconfig b/board/hardkernel/odroid-c2/Kconfig
deleted file mode 100644
index 687d9c6..0000000
--- a/board/hardkernel/odroid-c2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ODROID_C2
-
-config SYS_BOARD
- default "odroid-c2"
-
-config SYS_VENDOR
- default "hardkernel"
-
-config SYS_CONFIG_NAME
- default "odroid-c2"
-
-endif
diff --git a/board/hardkernel/odroid-c2/MAINTAINERS b/board/hardkernel/odroid-c2/MAINTAINERS
deleted file mode 100644
index 23ae1e7..0000000
--- a/board/hardkernel/odroid-c2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ODROID-C2
-M: Beniamino Galvani <b.galvani@gmail.com>
-S: Maintained
-F: board/hardkernel/odroid-c2/
-F: include/configs/odroid-c2.h
-F: configs/odroid-c2_defconfig
diff --git a/board/hardkernel/odroid-c2/Makefile b/board/hardkernel/odroid-c2/Makefile
deleted file mode 100644
index 571044b..0000000
--- a/board/hardkernel/odroid-c2/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := odroid-c2.o
diff --git a/board/hardkernel/odroid-c2/README b/board/hardkernel/odroid-c2/README
deleted file mode 100644
index d6d266a..0000000
--- a/board/hardkernel/odroid-c2/README
+++ /dev/null
@@ -1,60 +0,0 @@
-U-Boot for ODROID-C2
-====================
-
-ODROID-C2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
-
- - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - Gigabit Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 2.0 Host, 1 x USB OTG
- - eMMC, microSD
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the u-boot port supports the following devices:
- - serial
- - Ethernet
-
-u-boot compilation
-==================
-
- > export ARCH=arm
- > export CROSS_COMPILE=aarch64-none-elf-
- > make odroid-c2_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > DIR=odroid-c2
- > git clone --depth 1 \
- https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
- $DIR
- > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
- --bl301 $DIR/fip/gxb/bl301.bin \
- --bl31 $DIR/fip/gxb/bl31.bin \
- --bl33 u-boot.bin \
- $DIR/fip.bin
- > $DIR/fip/fip_create --dump $DIR/fip.bin
- > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
- > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
- --input $DIR/boot_new.bin \
- --output $DIR/u-boot.img
- > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > BL1=$DIR/sd_fuse/bl1.bin.hardkernel
- > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
- > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
- > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97
diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c
deleted file mode 100644
index bd72100..0000000
--- a/board/hardkernel/odroid-c2/odroid-c2.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/gxbb.h>
-#include <asm/arch/sm.h>
-#include <dm/platdata.h>
-#include <phy.h>
-
-#define EFUSE_SN_OFFSET 20
-#define EFUSE_SN_SIZE 16
-#define EFUSE_MAC_OFFSET 52
-#define EFUSE_MAC_SIZE 6
-
-int board_init(void)
-{
- return 0;
-}
-
-static const struct eth_pdata gxbb_eth_pdata = {
- .iobase = GXBB_ETH_BASE,
- .phy_interface = PHY_INTERFACE_MODE_RGMII,
-};
-
-U_BOOT_DEVICE(meson_eth) = {
- .name = "eth_designware",
- .platdata = &gxbb_eth_pdata,
-};
-
-int misc_init_r(void)
-{
- u8 mac_addr[EFUSE_MAC_SIZE];
- ssize_t len;
-
- /* Select Ethernet function */
- setbits_le32(GXBB_PINMUX(6), 0x3fff);
-
- /* Set RGMII mode */
- setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
- GXBB_ETH_REG_0_TX_PHASE(1) |
- GXBB_ETH_REG_0_TX_RATIO(4) |
- GXBB_ETH_REG_0_PHY_CLK_EN |
- GXBB_ETH_REG_0_CLK_EN);
-
- /* Enable power and clock gate */
- setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
- clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
-
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
- clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
-
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
- mac_addr, EFUSE_MAC_SIZE);
- if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- }
-
- return 0;
-}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
@ 2016-06-09 14:45 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-09 14:45 UTC (permalink / raw)
To: linus-amlogic
From: Carlo Caione <carlo@endlessm.com>
s/hardkernel/amlogic/ to have a single place for all the amlogic-based
boards.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/odroid-c2/Kconfig | 12 ++++++
board/amlogic/odroid-c2/MAINTAINERS | 6 +++
board/amlogic/odroid-c2/Makefile | 7 ++++
board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
board/hardkernel/odroid-c2/Kconfig | 12 ------
board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
board/hardkernel/odroid-c2/Makefile | 7 ----
board/hardkernel/odroid-c2/README | 60 ------------------------------
board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
11 files changed, 153 insertions(+), 153 deletions(-)
create mode 100644 board/amlogic/odroid-c2/Kconfig
create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
create mode 100644 board/amlogic/odroid-c2/Makefile
create mode 100644 board/amlogic/odroid-c2/README
create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
delete mode 100644 board/hardkernel/odroid-c2/Kconfig
delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
delete mode 100644 board/hardkernel/odroid-c2/Makefile
delete mode 100644 board/hardkernel/odroid-c2/README
delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 77d3cfe..af3be59 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -26,6 +26,6 @@ config SYS_SOC
config SYS_MALLOC_F_LEN
default 0x1000
-source "board/hardkernel/odroid-c2/Kconfig"
+source "board/amlogic/odroid-c2/Kconfig"
endif
diff --git a/board/amlogic/odroid-c2/Kconfig b/board/amlogic/odroid-c2/Kconfig
new file mode 100644
index 0000000..2b16889
--- /dev/null
+++ b/board/amlogic/odroid-c2/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ODROID_C2
+
+config SYS_BOARD
+ default "odroid-c2"
+
+config SYS_VENDOR
+ default "amlogic"
+
+config SYS_CONFIG_NAME
+ default "odroid-c2"
+
+endif
diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS
new file mode 100644
index 0000000..699850f
--- /dev/null
+++ b/board/amlogic/odroid-c2/MAINTAINERS
@@ -0,0 +1,6 @@
+ODROID-C2
+M: Beniamino Galvani <b.galvani@gmail.com>
+S: Maintained
+F: board/amlogic/odroid-c2/
+F: include/configs/odroid-c2.h
+F: configs/odroid-c2_defconfig
diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/odroid-c2/Makefile
new file mode 100644
index 0000000..571044b
--- /dev/null
+++ b/board/amlogic/odroid-c2/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := odroid-c2.o
diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README
new file mode 100644
index 0000000..d6d266a
--- /dev/null
+++ b/board/amlogic/odroid-c2/README
@@ -0,0 +1,60 @@
+U-Boot for ODROID-C2
+====================
+
+ODROID-C2 is a single board computer manufactured by Hardkernel
+Co. Ltd with the following specifications:
+
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 40-pin GPIO header
+ - 4 x USB 2.0 Host, 1 x USB OTG
+ - eMMC, microSD
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - Ethernet
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make odroid-c2_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > DIR=odroid-c2
+ > git clone --depth 1 \
+ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
+ $DIR
+ > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
+ --bl301 $DIR/fip/gxb/bl301.bin \
+ --bl31 $DIR/fip/gxb/bl31.bin \
+ --bl33 u-boot.bin \
+ $DIR/fip.bin
+ > $DIR/fip/fip_create --dump $DIR/fip.bin
+ > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
+ > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
+ --input $DIR/boot_new.bin \
+ --output $DIR/u-boot.img
+ > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > BL1=$DIR/sd_fuse/bl1.bin.hardkernel
+ > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
+ > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
+ > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97
diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
new file mode 100644
index 0000000..bd72100
--- /dev/null
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/sm.h>
+#include <dm/platdata.h>
+#include <phy.h>
+
+#define EFUSE_SN_OFFSET 20
+#define EFUSE_SN_SIZE 16
+#define EFUSE_MAC_OFFSET 52
+#define EFUSE_MAC_SIZE 6
+
+int board_init(void)
+{
+ return 0;
+}
+
+static const struct eth_pdata gxbb_eth_pdata = {
+ .iobase = GXBB_ETH_BASE,
+ .phy_interface = PHY_INTERFACE_MODE_RGMII,
+};
+
+U_BOOT_DEVICE(meson_eth) = {
+ .name = "eth_designware",
+ .platdata = &gxbb_eth_pdata,
+};
+
+int misc_init_r(void)
+{
+ u8 mac_addr[EFUSE_MAC_SIZE];
+ ssize_t len;
+
+ /* Select Ethernet function */
+ setbits_le32(GXBB_PINMUX(6), 0x3fff);
+
+ /* Set RGMII mode */
+ setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+ GXBB_ETH_REG_0_TX_PHASE(1) |
+ GXBB_ETH_REG_0_TX_RATIO(4) |
+ GXBB_ETH_REG_0_PHY_CLK_EN |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+ /* Reset PHY on GPIOZ_14 */
+ clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
+ clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+ mdelay(10);
+ setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+ mac_addr, EFUSE_MAC_SIZE);
+ if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ return 0;
+}
diff --git a/board/hardkernel/odroid-c2/Kconfig b/board/hardkernel/odroid-c2/Kconfig
deleted file mode 100644
index 687d9c6..0000000
--- a/board/hardkernel/odroid-c2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_ODROID_C2
-
-config SYS_BOARD
- default "odroid-c2"
-
-config SYS_VENDOR
- default "hardkernel"
-
-config SYS_CONFIG_NAME
- default "odroid-c2"
-
-endif
diff --git a/board/hardkernel/odroid-c2/MAINTAINERS b/board/hardkernel/odroid-c2/MAINTAINERS
deleted file mode 100644
index 23ae1e7..0000000
--- a/board/hardkernel/odroid-c2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ODROID-C2
-M: Beniamino Galvani <b.galvani@gmail.com>
-S: Maintained
-F: board/hardkernel/odroid-c2/
-F: include/configs/odroid-c2.h
-F: configs/odroid-c2_defconfig
diff --git a/board/hardkernel/odroid-c2/Makefile b/board/hardkernel/odroid-c2/Makefile
deleted file mode 100644
index 571044b..0000000
--- a/board/hardkernel/odroid-c2/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := odroid-c2.o
diff --git a/board/hardkernel/odroid-c2/README b/board/hardkernel/odroid-c2/README
deleted file mode 100644
index d6d266a..0000000
--- a/board/hardkernel/odroid-c2/README
+++ /dev/null
@@ -1,60 +0,0 @@
-U-Boot for ODROID-C2
-====================
-
-ODROID-C2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
-
- - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - Gigabit Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 2.0 Host, 1 x USB OTG
- - eMMC, microSD
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the u-boot port supports the following devices:
- - serial
- - Ethernet
-
-u-boot compilation
-==================
-
- > export ARCH=arm
- > export CROSS_COMPILE=aarch64-none-elf-
- > make odroid-c2_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > DIR=odroid-c2
- > git clone --depth 1 \
- https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
- $DIR
- > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
- --bl301 $DIR/fip/gxb/bl301.bin \
- --bl31 $DIR/fip/gxb/bl31.bin \
- --bl33 u-boot.bin \
- $DIR/fip.bin
- > $DIR/fip/fip_create --dump $DIR/fip.bin
- > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
- > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
- --input $DIR/boot_new.bin \
- --output $DIR/u-boot.img
- > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > BL1=$DIR/sd_fuse/bl1.bin.hardkernel
- > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
- > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
- > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97
diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c
deleted file mode 100644
index bd72100..0000000
--- a/board/hardkernel/odroid-c2/odroid-c2.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/gxbb.h>
-#include <asm/arch/sm.h>
-#include <dm/platdata.h>
-#include <phy.h>
-
-#define EFUSE_SN_OFFSET 20
-#define EFUSE_SN_SIZE 16
-#define EFUSE_MAC_OFFSET 52
-#define EFUSE_MAC_SIZE 6
-
-int board_init(void)
-{
- return 0;
-}
-
-static const struct eth_pdata gxbb_eth_pdata = {
- .iobase = GXBB_ETH_BASE,
- .phy_interface = PHY_INTERFACE_MODE_RGMII,
-};
-
-U_BOOT_DEVICE(meson_eth) = {
- .name = "eth_designware",
- .platdata = &gxbb_eth_pdata,
-};
-
-int misc_init_r(void)
-{
- u8 mac_addr[EFUSE_MAC_SIZE];
- ssize_t len;
-
- /* Select Ethernet function */
- setbits_le32(GXBB_PINMUX(6), 0x3fff);
-
- /* Set RGMII mode */
- setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
- GXBB_ETH_REG_0_TX_PHASE(1) |
- GXBB_ETH_REG_0_TX_RATIO(4) |
- GXBB_ETH_REG_0_PHY_CLK_EN |
- GXBB_ETH_REG_0_CLK_EN);
-
- /* Enable power and clock gate */
- setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
- clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
-
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
- clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
-
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
- mac_addr, EFUSE_MAC_SIZE);
- if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- }
-
- return 0;
-}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 1/2] configs: gxbb: Introduce a common config header file
2016-06-09 14:45 ` Carlo Caione
@ 2016-06-10 0:36 ` Simon Glass
-1 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 0:36 UTC (permalink / raw)
To: u-boot
On 9 June 2016 at 08:45, Carlo Caione <carlo@caione.org> wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> Introduce a meson-gxbb-common.h header file and derive the
> configuration for Hardkernel Odroid-C2 board from that.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++
> include/configs/odroid-c2.h | 34 +---------------------------
> 2 files changed, 46 insertions(+), 33 deletions(-)
> create mode 100644 include/configs/meson-gxbb-common.h
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/2] configs: gxbb: Introduce a common config header file
@ 2016-06-10 0:36 ` Simon Glass
0 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 0:36 UTC (permalink / raw)
To: linus-amlogic
On 9 June 2016 at 08:45, Carlo Caione <carlo@caione.org> wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> Introduce a meson-gxbb-common.h header file and derive the
> configuration for Hardkernel Odroid-C2 board from that.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> include/configs/meson-gxbb-common.h | 45 +++++++++++++++++++++++++++++++++++++
> include/configs/odroid-c2.h | 34 +---------------------------
> 2 files changed, 46 insertions(+), 33 deletions(-)
> create mode 100644 include/configs/meson-gxbb-common.h
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
2016-06-09 14:45 ` Carlo Caione
@ 2016-06-10 0:36 ` Simon Glass
-1 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 0:36 UTC (permalink / raw)
To: u-boot
On 9 June 2016 at 08:45, Carlo Caione <carlo@caione.org> wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> s/hardkernel/amlogic/ to have a single place for all the amlogic-based
> boards.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> arch/arm/mach-meson/Kconfig | 2 +-
> board/amlogic/odroid-c2/Kconfig | 12 ++++++
> board/amlogic/odroid-c2/MAINTAINERS | 6 +++
> board/amlogic/odroid-c2/Makefile | 7 ++++
> board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
> board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
> board/hardkernel/odroid-c2/Kconfig | 12 ------
> board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
> board/hardkernel/odroid-c2/Makefile | 7 ----
> board/hardkernel/odroid-c2/README | 60 ------------------------------
> board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
> 11 files changed, 153 insertions(+), 153 deletions(-)
> create mode 100644 board/amlogic/odroid-c2/Kconfig
> create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
> create mode 100644 board/amlogic/odroid-c2/Makefile
> create mode 100644 board/amlogic/odroid-c2/README
> create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
> delete mode 100644 board/hardkernel/odroid-c2/Kconfig
> delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
> delete mode 100644 board/hardkernel/odroid-c2/Makefile
> delete mode 100644 board/hardkernel/odroid-c2/README
> delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
Reviewed-by: Simon Glass <sjg@chromium.org>
Although I'm surprised this did not come through as a rename in your patch.
- Simon
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
@ 2016-06-10 0:36 ` Simon Glass
0 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 0:36 UTC (permalink / raw)
To: linus-amlogic
On 9 June 2016 at 08:45, Carlo Caione <carlo@caione.org> wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> s/hardkernel/amlogic/ to have a single place for all the amlogic-based
> boards.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> ---
> arch/arm/mach-meson/Kconfig | 2 +-
> board/amlogic/odroid-c2/Kconfig | 12 ++++++
> board/amlogic/odroid-c2/MAINTAINERS | 6 +++
> board/amlogic/odroid-c2/Makefile | 7 ++++
> board/amlogic/odroid-c2/README | 60 ++++++++++++++++++++++++++++++
> board/amlogic/odroid-c2/odroid-c2.c | 67 ++++++++++++++++++++++++++++++++++
> board/hardkernel/odroid-c2/Kconfig | 12 ------
> board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
> board/hardkernel/odroid-c2/Makefile | 7 ----
> board/hardkernel/odroid-c2/README | 60 ------------------------------
> board/hardkernel/odroid-c2/odroid-c2.c | 67 ----------------------------------
> 11 files changed, 153 insertions(+), 153 deletions(-)
> create mode 100644 board/amlogic/odroid-c2/Kconfig
> create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
> create mode 100644 board/amlogic/odroid-c2/Makefile
> create mode 100644 board/amlogic/odroid-c2/README
> create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
> delete mode 100644 board/hardkernel/odroid-c2/Kconfig
> delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
> delete mode 100644 board/hardkernel/odroid-c2/Makefile
> delete mode 100644 board/hardkernel/odroid-c2/README
> delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
Reviewed-by: Simon Glass <sjg@chromium.org>
Although I'm surprised this did not come through as a rename in your patch.
- Simon
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
2016-06-10 0:36 ` Simon Glass
(?)
@ 2016-06-10 8:03 ` Ben Dooks
2016-06-10 8:19 ` Carlo Caione
-1 siblings, 1 reply; 15+ messages in thread
From: Ben Dooks @ 2016-06-10 8:03 UTC (permalink / raw)
To: u-boot
do you have git rename-detection enabled?
On 10 June 2016 at 01:36, Simon Glass <sjg@chromium.org> wrote:
> On 9 June 2016 at 08:45, Carlo Caione <carlo@caione.org> wrote:
> > From: Carlo Caione <carlo@endlessm.com>
> >
> > s/hardkernel/amlogic/ to have a single place for all the amlogic-based
> > boards.
> >
> > Signed-off-by: Carlo Caione <carlo@endlessm.com>
> > ---
> > arch/arm/mach-meson/Kconfig | 2 +-
> > board/amlogic/odroid-c2/Kconfig | 12 ++++++
> > board/amlogic/odroid-c2/MAINTAINERS | 6 +++
> > board/amlogic/odroid-c2/Makefile | 7 ++++
> > board/amlogic/odroid-c2/README | 60
> ++++++++++++++++++++++++++++++
> > board/amlogic/odroid-c2/odroid-c2.c | 67
> ++++++++++++++++++++++++++++++++++
> > board/hardkernel/odroid-c2/Kconfig | 12 ------
> > board/hardkernel/odroid-c2/MAINTAINERS | 6 ---
> > board/hardkernel/odroid-c2/Makefile | 7 ----
> > board/hardkernel/odroid-c2/README | 60
> ------------------------------
> > board/hardkernel/odroid-c2/odroid-c2.c | 67
> ----------------------------------
> > 11 files changed, 153 insertions(+), 153 deletions(-)
> > create mode 100644 board/amlogic/odroid-c2/Kconfig
> > create mode 100644 board/amlogic/odroid-c2/MAINTAINERS
> > create mode 100644 board/amlogic/odroid-c2/Makefile
> > create mode 100644 board/amlogic/odroid-c2/README
> > create mode 100644 board/amlogic/odroid-c2/odroid-c2.c
> > delete mode 100644 board/hardkernel/odroid-c2/Kconfig
> > delete mode 100644 board/hardkernel/odroid-c2/MAINTAINERS
> > delete mode 100644 board/hardkernel/odroid-c2/Makefile
> > delete mode 100644 board/hardkernel/odroid-c2/README
> > delete mode 100644 board/hardkernel/odroid-c2/odroid-c2.c
>
> Reviewed-by: Simon Glass <sjg@chromium.org>
>
> Although I'm surprised this did not come through as a rename in your patch.
>
> - Simon
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
--
Ben Dooks, http://www.fluff.org/ben/ bjdooks at googlemail.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
2016-06-10 8:03 ` [U-Boot] " Ben Dooks
@ 2016-06-10 8:19 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-10 8:19 UTC (permalink / raw)
To: u-boot
On 10/06/16 09:03, Ben Dooks wrote:
> do you have git rename-detection enabled?
I simply forgot to pass '-M' to git-format-patch. I can submit a v2 if
requested.
Cheers,
--
Carlo Caione
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
@ 2016-06-10 8:19 ` Carlo Caione
0 siblings, 0 replies; 15+ messages in thread
From: Carlo Caione @ 2016-06-10 8:19 UTC (permalink / raw)
To: linus-amlogic
On 10/06/16 09:03, Ben Dooks wrote:
> do you have git rename-detection enabled?
I simply forgot to pass '-M' to git-format-patch. I can submit a v2 if
requested.
Cheers,
--
Carlo Caione
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
2016-06-10 8:19 ` Carlo Caione
@ 2016-06-10 16:44 ` Simon Glass
-1 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 16:44 UTC (permalink / raw)
To: u-boot
Hi Carlo,
On 10 June 2016 at 02:19, Carlo Caione <carlo@caione.org> wrote:
> On 10/06/16 09:03, Ben Dooks wrote:
>> do you have git rename-detection enabled?
>
> I simply forgot to pass '-M' to git-format-patch. I can submit a v2 if
> requested.
Yes please. Also you can use patman which does this for you.
If your patches are in a branch with the correct upstream:
patman -nt
will generate patches and
patman -t
will send them
(you need -t because amlogic is unlikely to be a valid alias)
Regards,
Simon
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards
@ 2016-06-10 16:44 ` Simon Glass
0 siblings, 0 replies; 15+ messages in thread
From: Simon Glass @ 2016-06-10 16:44 UTC (permalink / raw)
To: linus-amlogic
Hi Carlo,
On 10 June 2016 at 02:19, Carlo Caione <carlo@caione.org> wrote:
> On 10/06/16 09:03, Ben Dooks wrote:
>> do you have git rename-detection enabled?
>
> I simply forgot to pass '-M' to git-format-patch. I can submit a v2 if
> requested.
Yes please. Also you can use patman which does this for you.
If your patches are in a branch with the correct upstream:
patman -nt
will generate patches and
patman -t
will send them
(you need -t because amlogic is unlikely to be a valid alias)
Regards,
Simon
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2016-06-10 16:44 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-09 14:45 [U-Boot] [PATCH 0/2] Prepare U-Boot for more Amlogic boards Carlo Caione
2016-06-09 14:45 ` Carlo Caione
2016-06-09 14:45 ` [U-Boot] [PATCH 1/2] configs: gxbb: Introduce a common config header file Carlo Caione
2016-06-09 14:45 ` Carlo Caione
2016-06-10 0:36 ` [U-Boot] " Simon Glass
2016-06-10 0:36 ` Simon Glass
2016-06-09 14:45 ` [U-Boot] [PATCH 2/2] board: amlogic: Rename folder for Amlogic boards Carlo Caione
2016-06-09 14:45 ` Carlo Caione
2016-06-10 0:36 ` [U-Boot] " Simon Glass
2016-06-10 0:36 ` Simon Glass
2016-06-10 8:03 ` [U-Boot] " Ben Dooks
2016-06-10 8:19 ` Carlo Caione
2016-06-10 8:19 ` Carlo Caione
2016-06-10 16:44 ` [U-Boot] " Simon Glass
2016-06-10 16:44 ` Simon Glass
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.