All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, daniel.lezcano@linaro.org,
	tglx@linutronix.de
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Ma Haijun <mahaijuns@gmail.com>
Subject: [PATCH v3 1/2] clocksource: Add Oxford Semiconductor RPS Dual Timer
Date: Wed, 15 Jun 2016 12:13:26 +0200	[thread overview]
Message-ID: <1465985607-21231-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1465985607-21231-1-git-send-email-narmstrong@baylibre.com>

Add clocksource and clockevent driver from dual RPS timer.
The HW provides a dual one-shot or periodic 24bit timers,
the drivers set the first one as tick event source and the
second as a continuous scheduler clock source.
The timer can use 1, 16 or 256 as pre-dividers, thus the
clocksource uses 16 by default.

CC: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clocksource/Kconfig           |   7 +
 drivers/clocksource/Makefile          |   1 +
 drivers/clocksource/timer-oxnas-rps.c | 290 ++++++++++++++++++++++++++++++++++
 3 files changed, 298 insertions(+)
 create mode 100644 drivers/clocksource/timer-oxnas-rps.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 47352d2..7e937e1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -293,6 +293,13 @@ config VF_PIT_TIMER
 	help
 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
 
+config OXNAS_RPS_TIMER
+	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	help
+	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
+
 config SYS_SUPPORTS_SH_CMT
         bool
 
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 473974f..bc66981 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
+obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
new file mode 100644
index 0000000..c002e99
--- /dev/null
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -0,0 +1,290 @@
+/*
+ * drivers/clocksource/timer-oxnas-rps.c
+ *
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+
+/* TIMER1 used as tick
+ * TIMER2 used as clocksource
+ */
+
+/* Registers definitions */
+
+#define TIMER_LOAD_REG		0x0
+#define TIMER_CURR_REG		0x4
+#define TIMER_CTRL_REG		0x8
+#define TIMER_CLRINT_REG	0xC
+
+#define TIMER_BITS		24
+
+#define TIMER_MAX_VAL		(BIT(TIMER_BITS) - 1)
+
+#define TIMER_PERIODIC		BIT(6)
+#define TIMER_ENABLE		BIT(7)
+
+#define TIMER_DIV1		(0)
+#define TIMER_DIV16		(1 << 2)
+#define TIMER_DIV256		(2 << 2)
+
+#define TIMER1_REG_OFFSET	0
+#define TIMER2_REG_OFFSET	0x20
+
+/* Clockevent & Clocksource data */
+
+struct oxnas_rps_timer {
+	struct clock_event_device clkevent;
+	void __iomem *clksrc_base;
+	void __iomem *clkevt_base;
+	unsigned long timer_period;
+	unsigned int timer_prescaler;
+	struct clk *clk;
+	int irq;
+};
+
+static irqreturn_t oxnas_rps_timer_irq(int irq, void *dev_id)
+{
+	struct oxnas_rps_timer *rps = dev_id;
+
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+
+	rps->clkevent.event_handler(&rps->clkevent);
+
+	return IRQ_HANDLED;
+}
+
+static void oxnas_rps_timer_config(struct oxnas_rps_timer *rps,
+				   unsigned long period,
+				   unsigned int periodic)
+{
+	uint32_t cfg = rps->timer_prescaler;
+
+	if (period)
+		cfg |= TIMER_ENABLE;
+
+	if (periodic)
+		cfg |= TIMER_PERIODIC;
+
+	writel_relaxed(period, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(cfg, rps->clkevt_base + TIMER_CTRL_REG);
+}
+
+static int oxnas_rps_timer_shutdown(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, 0, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_periodic(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 1);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, delta, 0);
+
+	return 0;
+}
+
+static int __init oxnas_rps_clockevent_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	ulong timer_rate;
+
+	/* Start with prescaler 1 */
+	rps->timer_prescaler = TIMER_DIV1;
+	rps->timer_period = DIV_ROUND_UP(clk_rate, HZ);
+	timer_rate = clk_rate;
+
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV16;
+		timer_rate = clk_rate / 16;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV256;
+		timer_rate = clk_rate / 256;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+
+	rps->clkevent.name = "oxnas-rps";
+	rps->clkevent.features = CLOCK_EVT_FEAT_PERIODIC |
+				 CLOCK_EVT_FEAT_ONESHOT |
+				 CLOCK_EVT_FEAT_DYNIRQ;
+	rps->clkevent.tick_resume = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_shutdown = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_periodic = oxnas_rps_timer_set_periodic;
+	rps->clkevent.set_state_oneshot = oxnas_rps_timer_set_oneshot;
+	rps->clkevent.set_next_event = oxnas_rps_timer_next_event;
+	rps->clkevent.rating = 200;
+	rps->clkevent.cpumask = cpu_possible_mask;
+	rps->clkevent.irq = rps->irq;
+	clockevents_config_and_register(&rps->clkevent,
+					timer_rate,
+					1,
+					TIMER_MAX_VAL);
+
+	pr_info("Registered clock event rate %luHz prescaler %x period %lu\n",
+			clk_rate,
+			rps->timer_prescaler,
+			rps->timer_period);
+
+	return 0;
+}
+
+/* Clocksource */
+
+static void __iomem *timer_sched_base;
+
+static u64 notrace oxnas_rps_read_sched_clock(void)
+{
+	return ~readl_relaxed(timer_sched_base);
+}
+
+static int __init oxnas_rps_clocksource_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	int ret;
+
+	/* use prescale 16 */
+	clk_rate = clk_rate / 16;
+
+	writel_relaxed(TIMER_MAX_VAL, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
+			rps->clksrc_base + TIMER_CTRL_REG);
+
+	timer_sched_base = rps->clksrc_base + TIMER_CURR_REG;
+	sched_clock_register(oxnas_rps_read_sched_clock,
+			     TIMER_BITS, clk_rate);
+	ret = clocksource_mmio_init(timer_sched_base,
+				    "oxnas_rps_clocksource_timer",
+				    clk_rate, 250, TIMER_BITS,
+				    clocksource_mmio_readl_down);
+	if (WARN_ON(ret)) {
+		pr_err("can't register clocksource\n");
+		return ret;
+	}
+
+	pr_info("Registered clocksource rate %luHz\n", clk_rate);
+
+	return 0;
+}
+
+static void __init oxnas_rps_timer_init(struct device_node *np)
+{
+	struct oxnas_rps_timer *rps;
+	void __iomem *base;
+	int ret;
+
+	rps = kzalloc(sizeof(*rps), GFP_KERNEL);
+	if (!rps) {
+		pr_err("Failed to allocate rps structure\n");
+		return;
+	}
+
+	rps->clk = of_clk_get(np, 0);
+	if (WARN_ON(IS_ERR(rps->clk)))
+		goto err_alloc;
+
+	if (WARN_ON(clk_prepare_enable(rps->clk)))
+		goto err_clk;
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		goto err_clk_prepare;
+
+	rps->irq = irq_of_parse_and_map(np, 0);
+	if (WARN_ON(rps->irq < 0))
+		goto err_iomap;
+
+	rps->clkevt_base = base + TIMER1_REG_OFFSET;
+	rps->clksrc_base = base + TIMER2_REG_OFFSET;
+
+	/* Disable timers */
+	writel_relaxed(0, rps->clkevt_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CLRINT_REG);
+
+	ret = request_irq(rps->irq, oxnas_rps_timer_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL,
+			  "rps-timer", rps);
+	if (WARN_ON(ret))
+		goto err_iomap;
+
+	ret = oxnas_rps_clocksource_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	ret = oxnas_rps_clockevent_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	return;
+
+err_irqreq:
+	free_irq(rps->irq, rps);
+err_iomap:
+	iounmap(base);
+err_clk_prepare:
+	clk_disable_unprepare(rps->clk);
+err_clk:
+	clk_put(rps->clk);
+err_alloc:
+	kfree(rps);
+}
+
+CLOCKSOURCE_OF_DECLARE(ox810se_rps,
+		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] clocksource: Add Oxford Semiconductor RPS Dual Timer
Date: Wed, 15 Jun 2016 12:13:26 +0200	[thread overview]
Message-ID: <1465985607-21231-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1465985607-21231-1-git-send-email-narmstrong@baylibre.com>

Add clocksource and clockevent driver from dual RPS timer.
The HW provides a dual one-shot or periodic 24bit timers,
the drivers set the first one as tick event source and the
second as a continuous scheduler clock source.
The timer can use 1, 16 or 256 as pre-dividers, thus the
clocksource uses 16 by default.

CC: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clocksource/Kconfig           |   7 +
 drivers/clocksource/Makefile          |   1 +
 drivers/clocksource/timer-oxnas-rps.c | 290 ++++++++++++++++++++++++++++++++++
 3 files changed, 298 insertions(+)
 create mode 100644 drivers/clocksource/timer-oxnas-rps.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 47352d2..7e937e1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -293,6 +293,13 @@ config VF_PIT_TIMER
 	help
 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
 
+config OXNAS_RPS_TIMER
+	bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+	help
+	  This enables support for the Oxford Semiconductor OXNAS RPS timers.
+
 config SYS_SUPPORTS_SH_CMT
         bool
 
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 473974f..bc66981 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
+obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
diff --git a/drivers/clocksource/timer-oxnas-rps.c b/drivers/clocksource/timer-oxnas-rps.c
new file mode 100644
index 0000000..c002e99
--- /dev/null
+++ b/drivers/clocksource/timer-oxnas-rps.c
@@ -0,0 +1,290 @@
+/*
+ * drivers/clocksource/timer-oxnas-rps.c
+ *
+ * Copyright (C) 2009 Oxford Semiconductor Ltd
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clockchips.h>
+#include <linux/sched_clock.h>
+
+/* TIMER1 used as tick
+ * TIMER2 used as clocksource
+ */
+
+/* Registers definitions */
+
+#define TIMER_LOAD_REG		0x0
+#define TIMER_CURR_REG		0x4
+#define TIMER_CTRL_REG		0x8
+#define TIMER_CLRINT_REG	0xC
+
+#define TIMER_BITS		24
+
+#define TIMER_MAX_VAL		(BIT(TIMER_BITS) - 1)
+
+#define TIMER_PERIODIC		BIT(6)
+#define TIMER_ENABLE		BIT(7)
+
+#define TIMER_DIV1		(0)
+#define TIMER_DIV16		(1 << 2)
+#define TIMER_DIV256		(2 << 2)
+
+#define TIMER1_REG_OFFSET	0
+#define TIMER2_REG_OFFSET	0x20
+
+/* Clockevent & Clocksource data */
+
+struct oxnas_rps_timer {
+	struct clock_event_device clkevent;
+	void __iomem *clksrc_base;
+	void __iomem *clkevt_base;
+	unsigned long timer_period;
+	unsigned int timer_prescaler;
+	struct clk *clk;
+	int irq;
+};
+
+static irqreturn_t oxnas_rps_timer_irq(int irq, void *dev_id)
+{
+	struct oxnas_rps_timer *rps = dev_id;
+
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+
+	rps->clkevent.event_handler(&rps->clkevent);
+
+	return IRQ_HANDLED;
+}
+
+static void oxnas_rps_timer_config(struct oxnas_rps_timer *rps,
+				   unsigned long period,
+				   unsigned int periodic)
+{
+	uint32_t cfg = rps->timer_prescaler;
+
+	if (period)
+		cfg |= TIMER_ENABLE;
+
+	if (periodic)
+		cfg |= TIMER_PERIODIC;
+
+	writel_relaxed(period, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(cfg, rps->clkevt_base + TIMER_CTRL_REG);
+}
+
+static int oxnas_rps_timer_shutdown(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, 0, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_periodic(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 1);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, rps->timer_period, 0);
+
+	return 0;
+}
+
+static int oxnas_rps_timer_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct oxnas_rps_timer *rps =
+		container_of(evt, struct oxnas_rps_timer, clkevent);
+
+	oxnas_rps_timer_config(rps, delta, 0);
+
+	return 0;
+}
+
+static int __init oxnas_rps_clockevent_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	ulong timer_rate;
+
+	/* Start with prescaler 1 */
+	rps->timer_prescaler = TIMER_DIV1;
+	rps->timer_period = DIV_ROUND_UP(clk_rate, HZ);
+	timer_rate = clk_rate;
+
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV16;
+		timer_rate = clk_rate / 16;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+	if (rps->timer_period > TIMER_MAX_VAL) {
+		rps->timer_prescaler = TIMER_DIV256;
+		timer_rate = clk_rate / 256;
+		rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
+	}
+
+	rps->clkevent.name = "oxnas-rps";
+	rps->clkevent.features = CLOCK_EVT_FEAT_PERIODIC |
+				 CLOCK_EVT_FEAT_ONESHOT |
+				 CLOCK_EVT_FEAT_DYNIRQ;
+	rps->clkevent.tick_resume = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_shutdown = oxnas_rps_timer_shutdown;
+	rps->clkevent.set_state_periodic = oxnas_rps_timer_set_periodic;
+	rps->clkevent.set_state_oneshot = oxnas_rps_timer_set_oneshot;
+	rps->clkevent.set_next_event = oxnas_rps_timer_next_event;
+	rps->clkevent.rating = 200;
+	rps->clkevent.cpumask = cpu_possible_mask;
+	rps->clkevent.irq = rps->irq;
+	clockevents_config_and_register(&rps->clkevent,
+					timer_rate,
+					1,
+					TIMER_MAX_VAL);
+
+	pr_info("Registered clock event rate %luHz prescaler %x period %lu\n",
+			clk_rate,
+			rps->timer_prescaler,
+			rps->timer_period);
+
+	return 0;
+}
+
+/* Clocksource */
+
+static void __iomem *timer_sched_base;
+
+static u64 notrace oxnas_rps_read_sched_clock(void)
+{
+	return ~readl_relaxed(timer_sched_base);
+}
+
+static int __init oxnas_rps_clocksource_init(struct oxnas_rps_timer *rps)
+{
+	ulong clk_rate = clk_get_rate(rps->clk);
+	int ret;
+
+	/* use prescale 16 */
+	clk_rate = clk_rate / 16;
+
+	writel_relaxed(TIMER_MAX_VAL, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
+			rps->clksrc_base + TIMER_CTRL_REG);
+
+	timer_sched_base = rps->clksrc_base + TIMER_CURR_REG;
+	sched_clock_register(oxnas_rps_read_sched_clock,
+			     TIMER_BITS, clk_rate);
+	ret = clocksource_mmio_init(timer_sched_base,
+				    "oxnas_rps_clocksource_timer",
+				    clk_rate, 250, TIMER_BITS,
+				    clocksource_mmio_readl_down);
+	if (WARN_ON(ret)) {
+		pr_err("can't register clocksource\n");
+		return ret;
+	}
+
+	pr_info("Registered clocksource rate %luHz\n", clk_rate);
+
+	return 0;
+}
+
+static void __init oxnas_rps_timer_init(struct device_node *np)
+{
+	struct oxnas_rps_timer *rps;
+	void __iomem *base;
+	int ret;
+
+	rps = kzalloc(sizeof(*rps), GFP_KERNEL);
+	if (!rps) {
+		pr_err("Failed to allocate rps structure\n");
+		return;
+	}
+
+	rps->clk = of_clk_get(np, 0);
+	if (WARN_ON(IS_ERR(rps->clk)))
+		goto err_alloc;
+
+	if (WARN_ON(clk_prepare_enable(rps->clk)))
+		goto err_clk;
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		goto err_clk_prepare;
+
+	rps->irq = irq_of_parse_and_map(np, 0);
+	if (WARN_ON(rps->irq < 0))
+		goto err_iomap;
+
+	rps->clkevt_base = base + TIMER1_REG_OFFSET;
+	rps->clksrc_base = base + TIMER2_REG_OFFSET;
+
+	/* Disable timers */
+	writel_relaxed(0, rps->clkevt_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CTRL_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_LOAD_REG);
+	writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
+	writel_relaxed(0, rps->clksrc_base + TIMER_CLRINT_REG);
+
+	ret = request_irq(rps->irq, oxnas_rps_timer_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL,
+			  "rps-timer", rps);
+	if (WARN_ON(ret))
+		goto err_iomap;
+
+	ret = oxnas_rps_clocksource_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	ret = oxnas_rps_clockevent_init(rps);
+	if (ret)
+		goto err_irqreq;
+
+	return;
+
+err_irqreq:
+	free_irq(rps->irq, rps);
+err_iomap:
+	iounmap(base);
+err_clk_prepare:
+	clk_disable_unprepare(rps->clk);
+err_clk:
+	clk_put(rps->clk);
+err_alloc:
+	kfree(rps);
+}
+
+CLOCKSOURCE_OF_DECLARE(ox810se_rps,
+		       "oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
-- 
1.9.1

  reply	other threads:[~2016-06-15 10:14 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-15 10:13 [PATCH v3 0/2] clocksource: Add support for Oxford Semiconductor RPS Dual Timer Neil Armstrong
2016-06-15 10:13 ` Neil Armstrong
2016-06-15 10:13 ` Neil Armstrong [this message]
2016-06-15 10:13   ` [PATCH v3 1/2] clocksource: Add " Neil Armstrong
2016-06-15 15:35   ` kbuild test robot
2016-06-15 15:35     ` kbuild test robot
2016-06-16 13:33     ` Daniel Lezcano
2016-06-16 13:33       ` Daniel Lezcano
2016-06-16 13:47       ` Neil Armstrong
2016-06-16 13:47         ` Neil Armstrong
2016-06-16 14:14         ` Daniel Lezcano
2016-06-16 14:14           ` Daniel Lezcano
2016-06-16 14:15         ` Daniel Lezcano
2016-06-16 14:15           ` Daniel Lezcano
2016-06-15 15:51   ` kbuild test robot
2016-06-15 15:51     ` kbuild test robot
2016-06-16 13:29     ` Daniel Lezcano
2016-06-16 13:29       ` Daniel Lezcano
2016-06-15 10:13 ` [PATCH v3 2/2] dt-bindings: clocksource: Add Add Oxford Semiconductor RPS Timer bindings Neil Armstrong
2016-06-15 10:13   ` Neil Armstrong
2016-06-15 10:13   ` Neil Armstrong
2016-06-15 10:23   ` Daniel Lezcano
2016-06-15 10:23     ` Daniel Lezcano
2016-06-15 10:26     ` Daniel Lezcano
2016-06-15 10:26       ` Daniel Lezcano
2016-06-15 10:39       ` Neil Armstrong
2016-06-15 10:39         ` Neil Armstrong
2016-06-16 15:01       ` Neil Armstrong
2016-06-16 15:01         ` Neil Armstrong
2016-06-16 15:05         ` Daniel Lezcano
2016-06-16 15:05           ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465985607-21231-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mahaijuns@gmail.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.