From: Simon Horman <horms+renesas@verge.net.au> To: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Magnus Damm <magnus.damm@gmail.com>, Wolfram Sang <wsa+renesas@sang-engineering.com>, Simon Horman <horms+renesas@verge.net.au> Subject: [PATCH v3 00/13] ARM: dts: r8a779x: use demuxer for I2C Date: Wed, 22 Jun 2016 12:43:38 +0900 [thread overview] Message-ID: <1466567031-20381-1-git-send-email-horms+renesas@verge.net.au> (raw) Hi, the intention of this series is to extend use of the demuxer for I2C on the lager, koelsch, porter, koelsch, alt and silk boards cover all I2C IP blocks that are either already used or exposed via an EXIO connector. * This is based on work by Wolfram Sang. * Testing: - Underlying driver problems are discussed in the thread "[PATCH v2 0/4] ARM: dts: r8a7790: lager: use demuxer for I2C" - I have only compile tested the silk and porters patches as I do not have access to those boards - For all other boards I have boot tested the code and the the default settings seem to work. * This series is based on renesas-next-20160621-v4.7-rc1 * To aid review it is provided in git at: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git topic/i2c-demu x-v3 * I also intend to add demux for I2C for r8a7792/blanche Changes between v2 and v3 * Group extra GPIO buses * Add GPIO fallback for IIC1/I2C1 on Lager * Add patches for koelsch, porter, alt and silk Changes between v1 and v2 * Provide GPIO fallback for I2C2, this does not seem appropriate for other I2C blocks on the lager board Simon Horman (13): ARM: dts: lager: rename and reindex i2cexio ARM: dts: lager: use demuxer for IIC1/I2C1 ARM: dts: lager: use demuxer for IIC2/I2C2 ARM: dts: lager: use demuxer for IIC3/I2C3 ARM: dts: koelsch: use demuxer for I2C1 ARM: dts: koelsch: use demuxer for I2C2 ARM: dts: koelsch: use demuxer for I2C4 ARM: dts: porter: use demuxer for I2C2 ARM: dts: porter: use demuxer for I2C2 ARM: dts: koelsch: use demuxer for I2C4 ARM: dts: alt: use demuxer for I2C1 ARM: dts: alt: use demuxer for I2C4 ARM: dts: silk: use demuxer for I2C1 arch/arm/boot/dts/r8a7790-lager.dts | 275 +++++++++++++++++++++++----------- arch/arm/boot/dts/r8a7791-koelsch.dts | 209 +++++++++++++++++++------- arch/arm/boot/dts/r8a7791-porter.dts | 129 +++++++++------- arch/arm/boot/dts/r8a7793-gose.dts | 147 ++++++++++++------ arch/arm/boot/dts/r8a7794-alt.dts | 87 +++++++++-- arch/arm/boot/dts/r8a7794-silk.dts | 117 +++++++++------ 6 files changed, 658 insertions(+), 306 deletions(-) -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 00/13] ARM: dts: r8a779x: use demuxer for I2C Date: Wed, 22 Jun 2016 12:43:38 +0900 [thread overview] Message-ID: <1466567031-20381-1-git-send-email-horms+renesas@verge.net.au> (raw) Hi, the intention of this series is to extend use of the demuxer for I2C on the lager, koelsch, porter, koelsch, alt and silk boards cover all I2C IP blocks that are either already used or exposed via an EXIO connector. * This is based on work by Wolfram Sang. * Testing: - Underlying driver problems are discussed in the thread "[PATCH v2 0/4] ARM: dts: r8a7790: lager: use demuxer for I2C" - I have only compile tested the silk and porters patches as I do not have access to those boards - For all other boards I have boot tested the code and the the default settings seem to work. * This series is based on renesas-next-20160621-v4.7-rc1 * To aid review it is provided in git at: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git topic/i2c-demu x-v3 * I also intend to add demux for I2C for r8a7792/blanche Changes between v2 and v3 * Group extra GPIO buses * Add GPIO fallback for IIC1/I2C1 on Lager * Add patches for koelsch, porter, alt and silk Changes between v1 and v2 * Provide GPIO fallback for I2C2, this does not seem appropriate for other I2C blocks on the lager board Simon Horman (13): ARM: dts: lager: rename and reindex i2cexio ARM: dts: lager: use demuxer for IIC1/I2C1 ARM: dts: lager: use demuxer for IIC2/I2C2 ARM: dts: lager: use demuxer for IIC3/I2C3 ARM: dts: koelsch: use demuxer for I2C1 ARM: dts: koelsch: use demuxer for I2C2 ARM: dts: koelsch: use demuxer for I2C4 ARM: dts: porter: use demuxer for I2C2 ARM: dts: porter: use demuxer for I2C2 ARM: dts: koelsch: use demuxer for I2C4 ARM: dts: alt: use demuxer for I2C1 ARM: dts: alt: use demuxer for I2C4 ARM: dts: silk: use demuxer for I2C1 arch/arm/boot/dts/r8a7790-lager.dts | 275 +++++++++++++++++++++++----------- arch/arm/boot/dts/r8a7791-koelsch.dts | 209 +++++++++++++++++++------- arch/arm/boot/dts/r8a7791-porter.dts | 129 +++++++++------- arch/arm/boot/dts/r8a7793-gose.dts | 147 ++++++++++++------ arch/arm/boot/dts/r8a7794-alt.dts | 87 +++++++++-- arch/arm/boot/dts/r8a7794-silk.dts | 117 +++++++++------ 6 files changed, 658 insertions(+), 306 deletions(-) -- 2.1.4
next reply other threads:[~2016-06-22 3:54 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-22 3:43 Simon Horman [this message] 2016-06-22 3:43 ` [PATCH v3 00/13] ARM: dts: r8a779x: use demuxer for I2C Simon Horman 2016-06-22 3:43 ` [PATCH v3 01/13] ARM: dts: lager: rename and reindex i2cexio Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-08-30 15:29 ` Wolfram Sang 2016-08-30 15:29 ` Wolfram Sang 2016-09-02 8:17 ` Simon Horman 2016-09-02 8:17 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 02/13] ARM: dts: lager: use demuxer for IIC1/I2C1 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 03/13] ARM: dts: lager: use demuxer for IIC2/I2C2 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 04/13] ARM: dts: lager: use demuxer for IIC3/I2C3 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 7:29 ` Geert Uytterhoeven 2016-06-22 7:29 ` Geert Uytterhoeven 2016-06-22 3:43 ` [PATCH v3 05/13] ARM: dts: koelsch: use demuxer for I2C1 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 06/13] ARM: dts: koelsch: use demuxer for I2C2 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 07/13] ARM: dts: koelsch: use demuxer for I2C4 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 08/13] ARM: dts: porter: use demuxer for I2C2 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 09/13] " Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 10/13] ARM: dts: koelsch: use demuxer for I2C4 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 11/13] ARM: dts: alt: use demuxer for I2C1 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 12/13] ARM: dts: alt: use demuxer for I2C4 Simon Horman 2016-06-22 3:43 ` Simon Horman 2016-06-22 3:43 ` [PATCH v3 13/13] ARM: dts: silk: use demuxer for I2C1 Simon Horman 2016-06-22 3:43 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1466567031-20381-1-git-send-email-horms+renesas@verge.net.au \ --to=horms+renesas@verge.net.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=wsa+renesas@sang-engineering.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.