From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/9] ARM: dts: sun7i: lamobo-r1: Remove usb1 vbus regulator
Date: Wed, 6 Jul 2016 17:10:43 +0800 [thread overview]
Message-ID: <1467796250-22010-3-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1467796250-22010-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
USB1 VBUS is directly tied to the 5V rail on the board. It is not
individually controllable. Drop the regulator.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 285142882a80..7307f07f82bd 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -282,10 +282,6 @@
status = "okay";
};
-®_usb1_vbus {
- status = "okay";
-};
-
®_usb2_vbus {
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
@@ -336,7 +332,6 @@
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
--
2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] ARM: dts: sun7i: lamobo-r1: Remove usb1 vbus regulator
Date: Wed, 6 Jul 2016 17:10:43 +0800 [thread overview]
Message-ID: <1467796250-22010-3-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1467796250-22010-1-git-send-email-wens@csie.org>
USB1 VBUS is directly tied to the 5V rail on the board. It is not
individually controllable. Drop the regulator.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 285142882a80..7307f07f82bd 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -282,10 +282,6 @@
status = "okay";
};
-®_usb1_vbus {
- status = "okay";
-};
-
®_usb2_vbus {
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
@@ -336,7 +332,6 @@
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
--
2.8.1
next prev parent reply other threads:[~2016-07-06 9:10 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 9:10 [PATCH 0/9] ARM: dts: sun7i: BPI-M1+ and Lamobo-R1 fixes Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
[not found] ` <1467796250-22010-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-07-06 9:10 ` [PATCH 1/9] ARM: dts: sun7i: lamobo-r1: Fix USB-based WiFi module power Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai [this message]
2016-07-06 9:10 ` [PATCH 2/9] ARM: dts: sun7i: lamobo-r1: Remove usb1 vbus regulator Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 3/9] ARM: dts: sun7i: lamobo-r1: Fix GPIO flags in reg_ahci_5v Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 4/9] ARM: dts: sun7i: lamobo-r1: Enable audio codec Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 5/9] ARM: dts: sun7i: bananapi-m1-plus: Reindent whole file using tabs Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 6/9] ARM: dts: sun7i: bananapi-m1-plus: Unify suffix for board specific labels Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 7/9] ARM: dts: sun7i: bananapi-m1-plus: red LED is power LED Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 8/9] ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators and OPPs for cpufreq Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
[not found] ` <1467796250-22010-9-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2016-07-09 8:18 ` Maxime Ripard
2016-07-09 8:18 ` Maxime Ripard
2016-07-12 2:12 ` Chen-Yu Tsai
2016-07-12 2:12 ` Chen-Yu Tsai
2016-07-06 9:10 ` [PATCH 9/9] ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG Chen-Yu Tsai
2016-07-06 9:10 ` Chen-Yu Tsai
2016-11-20 22:09 ` [PATCH 0/9] ARM: dts: sun7i: BPI-M1+ and Lamobo-R1 fixes Richard Kojedzinszky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467796250-22010-3-git-send-email-wens@csie.org \
--to=wens-jday2fn1rrm@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.