From: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> To: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>, Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> Subject: [PATCH v3 12/12] arm64: dts: h3ulcb: Sound SSI support Date: Wed, 31 Aug 2016 13:04:10 +0300 [thread overview] Message-ID: <1472637850-15053-1-git-send-email-vladimir.barinov@cogentembedded.com> (raw) In-Reply-To: <1472637712-14583-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> This supports SSI sound for H3ULCB board. SSI DMA mode used. CS2000 used as AUDIO_CLK_B. Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> --- Changes in version 3: - initially added arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++ 1 file changed, 115 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index bbd7928..a254231 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -45,6 +45,12 @@ }; }; + x12_clk: x12_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -68,6 +74,28 @@ states = <3300000 1 1800000 0>; }; + + audio_clkout: audio_clkout { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; }; &extal_clk { @@ -113,6 +141,18 @@ function = "sdhi0"; power-source = <1800>; }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + usb1_pins: usb1 { groups = "usb1"; function = "usb1"; @@ -136,6 +176,73 @@ pinctrl-names = "default"; status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; }; &sdhi0 { @@ -150,11 +257,19 @@ status = "okay"; }; +&ssi1 { + shared-pin; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; }; +&audio_clk_a { + clock-frequency = <22579200>; +}; + &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Vladimir Barinov <vladimir.barinov@cogentembedded.com> Subject: [PATCH v3 12/12] arm64: dts: h3ulcb: Sound SSI support Date: Wed, 31 Aug 2016 13:04:10 +0300 [thread overview] Message-ID: <1472637850-15053-1-git-send-email-vladimir.barinov@cogentembedded.com> (raw) In-Reply-To: <1472637712-14583-1-git-send-email-vladimir.barinov@cogentembedded.com> This supports SSI sound for H3ULCB board. SSI DMA mode used. CS2000 used as AUDIO_CLK_B. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- Changes in version 3: - initially added arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +++++++++++++++++++++++++ 1 file changed, 115 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index bbd7928..a254231 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -45,6 +45,12 @@ }; }; + x12_clk: x12_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -68,6 +74,28 @@ states = <3300000 1 1800000 0>; }; + + audio_clkout: audio_clkout { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; }; &extal_clk { @@ -113,6 +141,18 @@ function = "sdhi0"; power-source = <1800>; }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + usb1_pins: usb1 { groups = "usb1"; function = "usb1"; @@ -136,6 +176,73 @@ pinctrl-names = "default"; status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; }; &sdhi0 { @@ -150,11 +257,19 @@ status = "okay"; }; +&ssi1 { + shared-pin; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; }; +&audio_clk_a { + clock-frequency = <22579200>; +}; + &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; -- 1.9.1
next prev parent reply other threads:[~2016-08-31 10:04 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-08-31 10:01 [PATCH v3 0/12] arm64: renesas: add H3ULCB board Vladimir Barinov 2016-08-31 10:01 ` Vladimir Barinov 2016-08-31 10:02 ` [PATCH v3 01/12] dt: arm: shmobile: add H3ULCB board DT bindings Vladimir Barinov 2016-10-25 12:48 ` Geert Uytterhoeven 2016-10-25 15:06 ` Vladimir Barinov 2016-10-26 10:27 ` Vladimir Barinov 2016-10-26 11:33 ` Geert Uytterhoeven [not found] ` <1472637712-14583-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-08-31 10:02 ` [PATCH v3 02/12] arm64: dts: h3ulcb: initial device tree Vladimir Barinov 2016-08-31 10:02 ` Vladimir Barinov [not found] ` <1472637759-14663-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 7:38 ` Geert Uytterhoeven 2016-09-01 7:38 ` Geert Uytterhoeven 2016-08-31 10:03 ` [PATCH v3 05/12] arm64: dts: h3ulcb: enable GPIO leds Vladimir Barinov 2016-08-31 10:03 ` Vladimir Barinov [not found] ` <1472637789-14780-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 7:52 ` Geert Uytterhoeven 2016-09-01 7:52 ` Geert Uytterhoeven [not found] ` <CAMuHMdUpcajev3CsdhtpaD4PrqAOPsAcnv+65TFv-we6FPmDVw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-09-01 10:24 ` Vladimir Barinov 2016-09-01 10:24 ` Vladimir Barinov 2016-08-31 10:04 ` Vladimir Barinov [this message] 2016-08-31 10:04 ` [PATCH v3 12/12] arm64: dts: h3ulcb: Sound SSI support Vladimir Barinov 2016-09-02 1:19 ` Kuninori Morimoto 2016-09-02 1:19 ` Kuninori Morimoto [not found] ` <87d1knumv9.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org> 2016-09-02 8:19 ` Simon Horman 2016-09-02 8:19 ` Simon Horman 2016-08-31 10:02 ` [PATCH v3 03/12] arm64: dts: h3ulcb: enable SCIF clk and pins Vladimir Barinov [not found] ` <1472637769-14702-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 7:39 ` Geert Uytterhoeven 2016-09-01 7:39 ` Geert Uytterhoeven 2016-08-31 10:02 ` [PATCH v3 04/12] arm64: dts: h3ulcb: enable EthernetAVB Vladimir Barinov [not found] ` <1472637779-14741-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 7:48 ` Geert Uytterhoeven 2016-09-01 7:48 ` Geert Uytterhoeven 2016-09-01 10:11 ` Sergei Shtylyov 2016-08-31 10:03 ` [PATCH v3 06/12] arm64: dts: h3ulcb: enable SDHI0 Vladimir Barinov [not found] ` <1472637799-14819-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 8:11 ` Geert Uytterhoeven 2016-09-01 8:11 ` Geert Uytterhoeven 2016-09-01 10:41 ` Vladimir Barinov 2016-09-01 11:15 ` Geert Uytterhoeven 2016-08-31 10:03 ` [PATCH v3 07/12] arm64: dts: h3ulcb: enable I2C2 Vladimir Barinov [not found] ` <1472637809-14858-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 8:21 ` Geert Uytterhoeven 2016-09-01 8:21 ` Geert Uytterhoeven 2016-08-31 10:03 ` [PATCH v3 08/12] arm64: dts: h3ulcb: enable EXTALR clk Vladimir Barinov [not found] ` <1472637816-14897-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 8:21 ` Geert Uytterhoeven 2016-09-01 8:21 ` Geert Uytterhoeven 2016-08-31 10:03 ` [PATCH v3 09/12] arm64: dts: h3ulcb: enable WDT Vladimir Barinov [not found] ` <1472637828-14936-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 8:22 ` Geert Uytterhoeven 2016-09-01 8:22 ` Geert Uytterhoeven 2016-08-31 10:03 ` [PATCH v3 10/12] arm64: dts: h3ulcb: enable USB2 PHY of channel 1 Vladimir Barinov 2016-09-01 8:25 ` Geert Uytterhoeven 2016-08-31 10:04 ` [PATCH v3 11/12] arm64: dts: h3ulcb: enable USB2.0 Host " Vladimir Barinov [not found] ` <1472637843-15014-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-01 8:32 ` Geert Uytterhoeven 2016-09-01 8:32 ` Geert Uytterhoeven 2016-09-01 8:39 ` [PATCH v3 0/12] arm64: renesas: add H3ULCB board Geert Uytterhoeven 2016-09-01 10:43 ` Vladimir Barinov 2016-09-01 14:17 ` Simon Horman 2016-09-01 14:27 ` Simon Horman 2016-09-01 19:25 ` Geert Uytterhoeven 2016-09-02 7:59 ` Simon Horman 2016-09-02 12:04 [PATCH v4 0/4] arm64: renesas: enable H3ULCB board peripherals Vladimir Barinov 2016-09-02 12:05 ` [PATCH v3 12/12] arm64: dts: h3ulcb: Sound SSI support Vladimir Barinov [not found] ` <1472817933-12018-1-git-send-email-vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-02 12:08 ` Vladimir Barinov 2016-09-02 12:08 ` Vladimir Barinov 2016-09-02 12:38 ` Sergei Shtylyov 2016-09-02 12:38 ` Sergei Shtylyov [not found] ` <159bb1fc-aa36-d30f-5064-b61efa34c663-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2016-09-02 14:33 ` Vladimir Barinov 2016-09-02 14:33 ` Vladimir Barinov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1472637850-15053-1-git-send-email-vladimir.barinov@cogentembedded.com \ --to=vladimir.barinov-m4dtvfq/zs1mrggop+s0pdbpr1lh4cv8@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \ --cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.