All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add regulators for ADV7533
Date: Wed, 31 Aug 2016 16:22:08 +0530	[thread overview]
Message-ID: <1472640730-24326-2-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Add the regulator supply properties needed for ADV7533. The regulator
names are named after the pin names. The exact use of each supply isn't
clear from the data sheets.

The regulators are specified as optional properties since there can
be boards which have a fixed supply directly routed to the pins, and
these may not be modelled as regulator supplies.

There might be a similar set of regulators for ADV7511, but we don't
have the docs at the moment to find out what supplies it needs. The
regulator properties needed by ADV7511 can be updated as we get more
data on it.

Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 6532a59..669b6f2 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -56,6 +56,12 @@ Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- avdd-supply: Only for ADV7533. A 1.8V supply that powers up the AVDD, DVDD
+  PVDD and A2VDD pins on the chip.
+- v1p2-supply: Only for ADV7533. A supply that powers up the V1P2 pin on the
+  chip. Can be either 1.2V or 1.8V.
+- v3p3-supply: Only for ADV7533. A 3.3V supply that powers up the V3P3 pin on
+  the chip.
 
 Required nodes:
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-08-31 10:52 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-31 10:52 [PATCH 0/3] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
     [not found] ` <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-31 10:52   ` Archit Taneja [this message]
2016-09-02 15:56     ` [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add " Rob Herring
2016-09-06  4:22       ` Archit Taneja
2016-08-31 10:52 ` [PATCH 2/3] drm/bridge: adv7533: Initialize regulators Archit Taneja
2016-08-31 15:53   ` Laurent Pinchart
2016-08-31 16:54     ` Archit Taneja
2016-08-31 20:30       ` Laurent Pinchart
2016-09-01 10:09         ` Archit Taneja
2016-08-31 10:52 ` [PATCH 3/3] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-08-31 20:54   ` Stephen Boyd
2016-09-01  6:12     ` Archit Taneja
2016-09-02  3:47     ` Bjorn Andersson
2016-09-23  9:20 ` [PATCH v2 0/4] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 1/4] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-09-23 22:31     ` Rob Herring
     [not found]     ` <1474622430-6704-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-25 17:28       ` Laurent Pinchart
2016-09-26  6:40         ` Archit Taneja
2016-09-26  8:12           ` Laurent Pinchart
2016-10-14  5:40             ` Archit Taneja
2016-11-10  1:34               ` Rob Herring
     [not found]                 ` <CAL_Jsq+KMPoyWvh1U3OKL6pX8D4QByqVFgcMks8myDfZEYeFCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-15  3:35                   ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 2/4] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-09-25 17:35     ` Laurent Pinchart
2016-09-26  6:40       ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 3/4] arm64: dts: apq8016-sbc: Add some missing regulator supplies for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 4/4] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-11-29  6:07   ` [PATCH v3 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
     [not found]     ` <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:07       ` [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
     [not found]         ` <1480399662-8858-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:33           ` Laurent Pinchart
2016-11-29  8:11             ` Archit Taneja
2016-11-29  9:11               ` Laurent Pinchart
2016-11-29 11:01                 ` Mark Brown
2016-11-29 19:37                   ` Laurent Pinchart
2016-11-30 16:14                     ` Mark Brown
2016-12-05 21:11                 ` Bjorn Andersson
2016-12-05 21:16                   ` Laurent Pinchart
2016-12-06 10:05                     ` Mark Brown
2016-12-06 12:46                       ` Laurent Pinchart
2016-12-06 13:20                         ` Mark Brown
2016-12-06 16:08                           ` Laurent Pinchart
2016-12-06 16:11                             ` Mark Brown
2016-11-29  6:07     ` [PATCH v3 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-11-29  6:28       ` Laurent Pinchart
2016-12-05  7:53     ` [PATCH v4 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2016-12-05  7:53       ` [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-12-09 22:11         ` Rob Herring
2016-12-18 11:17           ` Archit Taneja
2016-12-05  7:53       ` [PATCH v4 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2017-01-11  6:52       ` [PATCH v5 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2017-01-11  6:52         ` [PATCH v5 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2017-01-11  6:52         ` [PATCH v5 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472640730-24326-2-git-send-email-architt@codeaurora.org \
    --to=architt-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.