From: Archit Taneja <architt@codeaurora.org>
To: laurent.pinchart@ideasonboard.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 0/2] drm/bridge: adv7511: Enable regulators
Date: Wed, 11 Jan 2017 12:22:25 +0530 [thread overview]
Message-ID: <1484117547-26417-1-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1480924435-20882-1-git-send-email-architt@codeaurora.org>
The patch below added regulator supplies to the ADV533 HDMI bridge
on the DB410c, but the corresponding DT binding doc wasn't updated
to list them:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=28546b09551190c727c94d1c5c96ca609065beb2
The first patch adds the regulator supply props to the binding
docs for both ADV7511 and ADV7533. The second patch updates the drm
bridge driver to enable these regulators.
Changes in v5:
- Switch back to having individual supplies for AVDD, DVDD, PVDD
pins.
Changes in v4:
- Moved the regulator supply bindings from optional to mandatory.
- Used unsigned int for num_supplies and iterator used for parsing
the regulator supply properties.
Changes in v3:
- Revert back to having a common supply for AVDD, DVDD, PVDD pins.
- Dropped the DB410c DT patches.
Changes in v2:
- Provide the regulator supply for ADV7511 too in the binding docs.
- Update the driver to manage regulators for both ADV7511 and ADV7533.
- Have separate supply entries for AVDD, DVDD, PVDD, A2VDD pins.
- Use regulator_bulk_* API to configure regulators.
Archit Taneja (2):
dt-bindings: drm/bridge: adv7511: Add regulator bindings
drm/bridge: adv7511: Initialize regulators
.../bindings/display/bridge/adi,adv7511.txt | 12 +++
drivers/gpu/drm/bridge/adv7511/adv7511.h | 4 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 86 +++++++++++++++++++---
3 files changed, 93 insertions(+), 9 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-01-11 6:52 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 10:52 [PATCH 0/3] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
[not found] ` <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-31 10:52 ` [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add " Archit Taneja
2016-09-02 15:56 ` Rob Herring
2016-09-06 4:22 ` Archit Taneja
2016-08-31 10:52 ` [PATCH 2/3] drm/bridge: adv7533: Initialize regulators Archit Taneja
2016-08-31 15:53 ` Laurent Pinchart
2016-08-31 16:54 ` Archit Taneja
2016-08-31 20:30 ` Laurent Pinchart
2016-09-01 10:09 ` Archit Taneja
2016-08-31 10:52 ` [PATCH 3/3] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-08-31 20:54 ` Stephen Boyd
2016-09-01 6:12 ` Archit Taneja
2016-09-02 3:47 ` Bjorn Andersson
2016-09-23 9:20 ` [PATCH v2 0/4] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
2016-09-23 9:20 ` [PATCH v2 1/4] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-09-23 22:31 ` Rob Herring
[not found] ` <1474622430-6704-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-25 17:28 ` Laurent Pinchart
2016-09-26 6:40 ` Archit Taneja
2016-09-26 8:12 ` Laurent Pinchart
2016-10-14 5:40 ` Archit Taneja
2016-11-10 1:34 ` Rob Herring
[not found] ` <CAL_Jsq+KMPoyWvh1U3OKL6pX8D4QByqVFgcMks8myDfZEYeFCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-15 3:35 ` Archit Taneja
2016-09-23 9:20 ` [PATCH v2 2/4] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-09-25 17:35 ` Laurent Pinchart
2016-09-26 6:40 ` Archit Taneja
2016-09-23 9:20 ` [PATCH v2 3/4] arm64: dts: apq8016-sbc: Add some missing regulator supplies for ADV7533 Archit Taneja
2016-09-23 9:20 ` [PATCH v2 4/4] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-11-29 6:07 ` [PATCH v3 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
[not found] ` <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29 6:07 ` [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
[not found] ` <1480399662-8858-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29 6:33 ` Laurent Pinchart
2016-11-29 8:11 ` Archit Taneja
2016-11-29 9:11 ` Laurent Pinchart
2016-11-29 11:01 ` Mark Brown
2016-11-29 19:37 ` Laurent Pinchart
2016-11-30 16:14 ` Mark Brown
2016-12-05 21:11 ` Bjorn Andersson
2016-12-05 21:16 ` Laurent Pinchart
2016-12-06 10:05 ` Mark Brown
2016-12-06 12:46 ` Laurent Pinchart
2016-12-06 13:20 ` Mark Brown
2016-12-06 16:08 ` Laurent Pinchart
2016-12-06 16:11 ` Mark Brown
2016-11-29 6:07 ` [PATCH v3 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-11-29 6:28 ` Laurent Pinchart
2016-12-05 7:53 ` [PATCH v4 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2016-12-05 7:53 ` [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-12-09 22:11 ` Rob Herring
2016-12-18 11:17 ` Archit Taneja
2016-12-05 7:53 ` [PATCH v4 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2017-01-11 6:52 ` Archit Taneja [this message]
2017-01-11 6:52 ` [PATCH v5 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2017-01-11 6:52 ` [PATCH v5 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484117547-26417-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.