All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: andy.gross@linaro.org, laurent.pinchart@ideasonboard.com
Cc: linux-arm-msm@vger.kernel.org, robh@kernel.org,
	Archit Taneja <architt@codeaurora.org>
Subject: [PATCH v2 3/4] arm64: dts: apq8016-sbc: Add some missing regulator supplies for ADV7533
Date: Fri, 23 Sep 2016 14:50:29 +0530	[thread overview]
Message-ID: <1474622430-6704-4-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1474622430-6704-1-git-send-email-architt@codeaurora.org>

The DT bindings were updated for ADV7533 to make sure different
1.8V pins(AVDD, DVDD, PVDD, A2VDD) on the chip have different regulator
supply entries. This was done to make sure things don't break for platforms
which source these pins from different 1.8V supplies.

Update the DT node according to new bindings. There isn't any change in
behavior between the current and new DTs since all these supplies are
fed by the same LDO.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index bb062b5..87c5f08 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -78,6 +78,9 @@
 				pd-gpios = <&msmgpio 32 0>;
 
 				avdd-supply = <&pm8916_l6>;
+				dvdd-supply = <&pm8916_l6>;
+				pvdd-supply = <&pm8916_l6>;
+				a2vdd-supply = <&pm8916_l6>;
 				v1p2-supply = <&pm8916_l6>;
 				v3p3-supply = <&pm8916_l17>;
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2016-09-23  9:20 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-31 10:52 [PATCH 0/3] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
     [not found] ` <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-31 10:52   ` [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add " Archit Taneja
2016-09-02 15:56     ` Rob Herring
2016-09-06  4:22       ` Archit Taneja
2016-08-31 10:52 ` [PATCH 2/3] drm/bridge: adv7533: Initialize regulators Archit Taneja
2016-08-31 15:53   ` Laurent Pinchart
2016-08-31 16:54     ` Archit Taneja
2016-08-31 20:30       ` Laurent Pinchart
2016-09-01 10:09         ` Archit Taneja
2016-08-31 10:52 ` [PATCH 3/3] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-08-31 20:54   ` Stephen Boyd
2016-09-01  6:12     ` Archit Taneja
2016-09-02  3:47     ` Bjorn Andersson
2016-09-23  9:20 ` [PATCH v2 0/4] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 1/4] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-09-23 22:31     ` Rob Herring
     [not found]     ` <1474622430-6704-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-25 17:28       ` Laurent Pinchart
2016-09-26  6:40         ` Archit Taneja
2016-09-26  8:12           ` Laurent Pinchart
2016-10-14  5:40             ` Archit Taneja
2016-11-10  1:34               ` Rob Herring
     [not found]                 ` <CAL_Jsq+KMPoyWvh1U3OKL6pX8D4QByqVFgcMks8myDfZEYeFCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-15  3:35                   ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 2/4] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-09-25 17:35     ` Laurent Pinchart
2016-09-26  6:40       ` Archit Taneja
2016-09-23  9:20   ` Archit Taneja [this message]
2016-09-23  9:20   ` [PATCH v2 4/4] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-11-29  6:07   ` [PATCH v3 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
     [not found]     ` <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:07       ` [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
     [not found]         ` <1480399662-8858-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:33           ` Laurent Pinchart
2016-11-29  8:11             ` Archit Taneja
2016-11-29  9:11               ` Laurent Pinchart
2016-11-29 11:01                 ` Mark Brown
2016-11-29 19:37                   ` Laurent Pinchart
2016-11-30 16:14                     ` Mark Brown
2016-12-05 21:11                 ` Bjorn Andersson
2016-12-05 21:16                   ` Laurent Pinchart
2016-12-06 10:05                     ` Mark Brown
2016-12-06 12:46                       ` Laurent Pinchart
2016-12-06 13:20                         ` Mark Brown
2016-12-06 16:08                           ` Laurent Pinchart
2016-12-06 16:11                             ` Mark Brown
2016-11-29  6:07     ` [PATCH v3 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-11-29  6:28       ` Laurent Pinchart
2016-12-05  7:53     ` [PATCH v4 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2016-12-05  7:53       ` [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-12-09 22:11         ` Rob Herring
2016-12-18 11:17           ` Archit Taneja
2016-12-05  7:53       ` [PATCH v4 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2017-01-11  6:52       ` [PATCH v5 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2017-01-11  6:52         ` [PATCH v5 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2017-01-11  6:52         ` [PATCH v5 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474622430-6704-4-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.