From: <sean.wang@mediatek.com> To: <john@phrozen.org>, <davem@davemloft.net> Cc: <nbd@openwrt.org>, <netdev@vger.kernel.org>, <linux-mediatek@lists.infradead.org>, <keyhaede@gmail.com>, <objelf@gmail.com>, Sean Wang <sean.wang@mediatek.com> Subject: [PATCH net-next 0/3] add support for RGMII on GMAC0 through TRGMII hardware module Date: Tue, 20 Sep 2016 15:59:17 +0800 [thread overview] Message-ID: <1474358360-29901-1-git-send-email-sean.wang@mediatek.com> (raw) From: Sean Wang <sean.wang@mediatek.com> By default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Sean Wang (3): net: ethernet: mediatek: add extension of phy-mode for TRGMII net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 .../devicetree/bindings/net/mediatek-net.txt | 5 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 57 ++++++++++++++++++++-- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 32 ++++++++++++ 3 files changed, 90 insertions(+), 4 deletions(-) -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: <sean.wang@mediatek.com> To: john@phrozen.org, davem@davemloft.net Cc: nbd@openwrt.org, netdev@vger.kernel.org, linux-mediatek@lists.infradead.org, keyhaede@gmail.com, objelf@gmail.com, Sean Wang <sean.wang@mediatek.com> Subject: [PATCH net-next 0/3] add support for RGMII on GMAC0 through TRGMII hardware module Date: Tue, 20 Sep 2016 15:59:17 +0800 [thread overview] Message-ID: <1474358360-29901-1-git-send-email-sean.wang@mediatek.com> (raw) From: Sean Wang <sean.wang@mediatek.com> By default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Sean Wang (3): net: ethernet: mediatek: add extension of phy-mode for TRGMII net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 .../devicetree/bindings/net/mediatek-net.txt | 5 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 57 ++++++++++++++++++++-- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 32 ++++++++++++ 3 files changed, 90 insertions(+), 4 deletions(-) -- 1.9.1
next reply other threads:[~2016-09-20 7:59 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-09-20 7:59 sean.wang [this message] 2016-09-20 7:59 ` [PATCH net-next 0/3] add support for RGMII on GMAC0 through TRGMII hardware module sean.wang [not found] ` <1474358360-29901-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2016-09-20 7:59 ` [PATCH net-next 1/3] net: ethernet: mediatek: add extension of phy-mode for TRGMII sean.wang-NuS5LvNUpcJWk0Htik3J/w 2016-09-20 7:59 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2016-09-20 21:23 ` Florian Fainelli [not found] ` <064d43fb-2942-efd2-6dc7-09f47a256691-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-09-21 7:33 ` Sean Wang 2016-09-21 7:33 ` Sean Wang 2016-09-21 16:59 ` Florian Fainelli 2016-09-20 7:59 ` [PATCH net-next 2/3] net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII sean.wang 2016-09-20 7:59 ` sean.wang 2016-09-21 4:50 ` David Miller 2016-09-20 7:59 ` [PATCH net-next 3/3] net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 sean.wang 2016-09-20 7:59 ` sean.wang 2016-09-20 19:37 ` Andrew Lunn 2016-09-21 6:16 ` Sean Wang 2016-09-21 6:16 ` Sean Wang 2016-09-21 14:17 ` Andrew Lunn 2016-09-21 15:37 ` Sean Wang 2016-09-21 15:37 ` Sean Wang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1474358360-29901-1-git-send-email-sean.wang@mediatek.com \ --to=sean.wang@mediatek.com \ --cc=davem@davemloft.net \ --cc=john@phrozen.org \ --cc=keyhaede@gmail.com \ --cc=linux-mediatek@lists.infradead.org \ --cc=nbd@openwrt.org \ --cc=netdev@vger.kernel.org \ --cc=objelf@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.