From: Anshuman Khandual <khandual@linux.vnet.ibm.com> To: linux-kernel@vger.kernel.org, linux-mm@kvack.org Cc: mhocko@suse.com, js1304@gmail.com, vbabka@suse.cz, mgorman@suse.de, minchan@kernel.org, akpm@linux-foundation.org, aneesh.kumar@linux.vnet.ibm.com, bsingharora@gmail.com Subject: [DEBUG 05/10] powerpc/mm: Identify isolation seeking coherent memory nodes during boot Date: Mon, 24 Oct 2016 10:12:24 +0530 [thread overview] Message-ID: <1477284149-2976-6-git-send-email-khandual@linux.vnet.ibm.com> (raw) In-Reply-To: <1477284149-2976-1-git-send-email-khandual@linux.vnet.ibm.com> Isolation seeking coherent memory nodes which wish to be MNODE_ISOLATION in core VM will have "ibm,hotplug-aperture" as one of the compatible properties in their respective device nodes in device tree. Detect them during platform NUMA initialization and mark their respective coherent mask in pglist_data structure as MNODE_ISOLATION. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> --- arch/powerpc/mm/numa.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 5010181..89ae64c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -64,6 +64,7 @@ static int form1_affinity; static int distance_ref_points_depth; static const __be32 *distance_ref_points; static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; +static int node_to_phys_device_map[MAX_NUMNODES]; /* * Allocate node_to_cpumask_map based on number of available nodes @@ -714,6 +715,17 @@ static const struct of_device_id memory_match[] = { { /* sentinel */ } }; +int arch_get_memory_phys_device(unsigned long start_pfn) +{ + return node_to_phys_device_map[pfn_to_nid(start_pfn)]; +} + +int special_mem_node(int nid) +{ + return node_to_phys_device_map[nid]; +} +EXPORT_SYMBOL(special_mem_node); + static int __init parse_numa_properties(void) { struct device_node *memory; @@ -789,6 +801,9 @@ static int __init parse_numa_properties(void) if (nid < 0) nid = default_nid; + if (of_device_is_compatible(memory, "ibm,hotplug-aperture")) + node_to_phys_device_map[nid] = 1; + fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid); node_set_online(nid); @@ -908,6 +923,11 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) NODE_DATA(nid)->node_id = nid; NODE_DATA(nid)->node_start_pfn = start_pfn; NODE_DATA(nid)->node_spanned_pages = spanned_pages; + +#ifdef CONFIG_COHERENT_DEVICE + if (special_mem_node(nid)) + set_cdm_isolation(nid); +#endif } void __init initmem_init(void) -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Anshuman Khandual <khandual@linux.vnet.ibm.com> To: linux-kernel@vger.kernel.org, linux-mm@kvack.org Cc: mhocko@suse.com, js1304@gmail.com, vbabka@suse.cz, mgorman@suse.de, minchan@kernel.org, akpm@linux-foundation.org, aneesh.kumar@linux.vnet.ibm.com, bsingharora@gmail.com Subject: [DEBUG 05/10] powerpc/mm: Identify isolation seeking coherent memory nodes during boot Date: Mon, 24 Oct 2016 10:12:24 +0530 [thread overview] Message-ID: <1477284149-2976-6-git-send-email-khandual@linux.vnet.ibm.com> (raw) In-Reply-To: <1477284149-2976-1-git-send-email-khandual@linux.vnet.ibm.com> Isolation seeking coherent memory nodes which wish to be MNODE_ISOLATION in core VM will have "ibm,hotplug-aperture" as one of the compatible properties in their respective device nodes in device tree. Detect them during platform NUMA initialization and mark their respective coherent mask in pglist_data structure as MNODE_ISOLATION. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> --- arch/powerpc/mm/numa.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 5010181..89ae64c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -64,6 +64,7 @@ static int form1_affinity; static int distance_ref_points_depth; static const __be32 *distance_ref_points; static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; +static int node_to_phys_device_map[MAX_NUMNODES]; /* * Allocate node_to_cpumask_map based on number of available nodes @@ -714,6 +715,17 @@ static const struct of_device_id memory_match[] = { { /* sentinel */ } }; +int arch_get_memory_phys_device(unsigned long start_pfn) +{ + return node_to_phys_device_map[pfn_to_nid(start_pfn)]; +} + +int special_mem_node(int nid) +{ + return node_to_phys_device_map[nid]; +} +EXPORT_SYMBOL(special_mem_node); + static int __init parse_numa_properties(void) { struct device_node *memory; @@ -789,6 +801,9 @@ static int __init parse_numa_properties(void) if (nid < 0) nid = default_nid; + if (of_device_is_compatible(memory, "ibm,hotplug-aperture")) + node_to_phys_device_map[nid] = 1; + fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid); node_set_online(nid); @@ -908,6 +923,11 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) NODE_DATA(nid)->node_id = nid; NODE_DATA(nid)->node_start_pfn = start_pfn; NODE_DATA(nid)->node_spanned_pages = spanned_pages; + +#ifdef CONFIG_COHERENT_DEVICE + if (special_mem_node(nid)) + set_cdm_isolation(nid); +#endif } void __init initmem_init(void) -- 2.1.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-10-24 4:43 UTC|newest] Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-10-24 4:31 [RFC 0/8] Define coherent device memory node Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 4:31 ` [RFC 1/8] mm: " Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 17:09 ` Dave Hansen 2016-10-24 17:09 ` Dave Hansen 2016-10-25 1:22 ` Anshuman Khandual 2016-10-25 1:22 ` Anshuman Khandual 2016-10-25 15:47 ` Dave Hansen 2016-10-25 15:47 ` Dave Hansen 2016-10-24 4:31 ` [RFC 2/8] mm: Add specialized fallback zonelist for coherent device memory nodes Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 17:10 ` Dave Hansen 2016-10-24 17:10 ` Dave Hansen 2016-10-25 1:27 ` Anshuman Khandual 2016-10-25 1:27 ` Anshuman Khandual 2016-11-17 7:40 ` Anshuman Khandual 2016-11-17 7:40 ` Anshuman Khandual 2016-11-17 7:59 ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask Anshuman Khandual 2016-11-17 7:59 ` Anshuman Khandual 2016-11-17 7:59 ` [DRAFT 2/2] mm/hugetlb: Restrict HugeTLB allocations only to the system RAM nodes Anshuman Khandual 2016-11-17 7:59 ` Anshuman Khandual 2016-11-17 8:28 ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask kbuild test robot 2016-10-24 4:31 ` [RFC 3/8] mm: Isolate coherent device memory nodes from HugeTLB allocation paths Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 17:16 ` Dave Hansen 2016-10-24 17:16 ` Dave Hansen 2016-10-25 4:15 ` Aneesh Kumar K.V 2016-10-25 4:15 ` Aneesh Kumar K.V 2016-10-25 7:17 ` Balbir Singh 2016-10-25 7:17 ` Balbir Singh 2016-10-25 7:25 ` Balbir Singh 2016-10-25 7:25 ` Balbir Singh 2016-10-24 4:31 ` [RFC 4/8] mm: Accommodate coherent device memory nodes in MPOL_BIND implementation Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 4:31 ` [RFC 5/8] mm: Add new flag VM_CDM for coherent device memory Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 17:38 ` Dave Hansen 2016-10-24 17:38 ` Dave Hansen 2016-10-24 18:00 ` Dave Hansen 2016-10-24 18:00 ` Dave Hansen 2016-10-25 12:36 ` Balbir Singh 2016-10-25 12:36 ` Balbir Singh 2016-10-25 19:20 ` Aneesh Kumar K.V 2016-10-25 19:20 ` Aneesh Kumar K.V 2016-10-25 20:01 ` Dave Hansen 2016-10-25 20:01 ` Dave Hansen 2016-10-24 4:31 ` [RFC 6/8] mm: Make VM_CDM marked VMAs non migratable Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 4:31 ` [RFC 7/8] mm: Add a new migration function migrate_virtual_range() Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-24 4:31 ` [RFC 8/8] mm: Add N_COHERENT_DEVICE node type into node_states[] Anshuman Khandual 2016-10-24 4:31 ` Anshuman Khandual 2016-10-25 7:22 ` Balbir Singh 2016-10-25 7:22 ` Balbir Singh 2016-10-26 4:52 ` Anshuman Khandual 2016-10-26 4:52 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 00/10] Test and debug patches for coherent device memory Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 01/10] dt-bindings: Add doc for ibm,hotplug-aperture Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 02/10] powerpc/mm: Create numa nodes for hotplug memory Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 03/10] powerpc/mm: Allow memory hotplug into a memory less node Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 04/10] mm: Enable CONFIG_MOVABLE_NODE on powerpc Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual [this message] 2016-10-24 4:42 ` [DEBUG 05/10] powerpc/mm: Identify isolation seeking coherent memory nodes during boot Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 06/10] mm: Export definition of 'zone_names' array through mmzone.h Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 07/10] mm: Add debugfs interface to dump each node's zonelist information Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 08/10] powerpc: Enable CONFIG_MOVABLE_NODE for PPC64 platform Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 09/10] drivers: Add two drivers for coherent device memory tests Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 4:42 ` [DEBUG 10/10] test: Add a script to perform random VMA migrations across nodes Anshuman Khandual 2016-10-24 4:42 ` Anshuman Khandual 2016-10-24 17:09 ` [RFC 0/8] Define coherent device memory node Jerome Glisse 2016-10-24 17:09 ` Jerome Glisse 2016-10-25 4:26 ` Aneesh Kumar K.V 2016-10-25 4:26 ` Aneesh Kumar K.V 2016-10-25 15:16 ` Jerome Glisse 2016-10-25 15:16 ` Jerome Glisse 2016-10-26 11:09 ` Aneesh Kumar K.V 2016-10-26 11:09 ` Aneesh Kumar K.V 2016-10-26 16:07 ` Jerome Glisse 2016-10-26 16:07 ` Jerome Glisse 2016-10-28 5:29 ` Aneesh Kumar K.V 2016-10-28 5:29 ` Aneesh Kumar K.V 2016-10-28 16:16 ` Jerome Glisse 2016-10-28 16:16 ` Jerome Glisse 2016-11-05 5:21 ` Anshuman Khandual 2016-11-05 5:21 ` Anshuman Khandual 2016-11-05 18:02 ` Jerome Glisse 2016-11-05 18:02 ` Jerome Glisse 2016-10-25 4:59 ` Aneesh Kumar K.V 2016-10-25 4:59 ` Aneesh Kumar K.V 2016-10-25 15:32 ` Jerome Glisse 2016-10-25 15:32 ` Jerome Glisse 2016-10-25 17:31 ` Aneesh Kumar K.V 2016-10-25 17:31 ` Aneesh Kumar K.V 2016-10-25 18:52 ` Jerome Glisse 2016-10-25 18:52 ` Jerome Glisse 2016-10-26 11:13 ` Anshuman Khandual 2016-10-26 11:13 ` Anshuman Khandual 2016-10-26 16:02 ` Jerome Glisse 2016-10-26 16:02 ` Jerome Glisse 2016-10-27 4:38 ` Anshuman Khandual 2016-10-27 4:38 ` Anshuman Khandual 2016-10-27 7:03 ` Anshuman Khandual 2016-10-27 7:03 ` Anshuman Khandual 2016-10-27 15:05 ` Jerome Glisse 2016-10-27 15:05 ` Jerome Glisse 2016-10-28 5:47 ` Anshuman Khandual 2016-10-28 5:47 ` Anshuman Khandual 2016-10-28 16:08 ` Jerome Glisse 2016-10-28 16:08 ` Jerome Glisse 2016-10-26 12:56 ` Anshuman Khandual 2016-10-26 12:56 ` Anshuman Khandual 2016-10-26 16:28 ` Jerome Glisse 2016-10-26 16:28 ` Jerome Glisse 2016-10-27 10:23 ` Balbir Singh 2016-10-27 10:23 ` Balbir Singh 2016-10-25 12:07 ` Balbir Singh 2016-10-25 12:07 ` Balbir Singh 2016-10-25 15:21 ` Jerome Glisse 2016-10-25 15:21 ` Jerome Glisse 2016-10-24 18:04 ` Dave Hansen 2016-10-24 18:04 ` Dave Hansen 2016-10-24 18:32 ` David Nellans 2016-10-24 18:32 ` David Nellans 2016-10-24 19:36 ` Dave Hansen 2016-10-24 19:36 ` Dave Hansen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1477284149-2976-6-git-send-email-khandual@linux.vnet.ibm.com \ --to=khandual@linux.vnet.ibm.com \ --cc=akpm@linux-foundation.org \ --cc=aneesh.kumar@linux.vnet.ibm.com \ --cc=bsingharora@gmail.com \ --cc=js1304@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=mgorman@suse.de \ --cc=mhocko@suse.com \ --cc=minchan@kernel.org \ --cc=vbabka@suse.cz \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.