* [PATCH 2/2] drm/i915: Set link status property for DP connector
2016-10-26 1:16 [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
@ 2016-10-26 1:16 ` Manasi Navare
2016-10-26 1:19 ` [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
` (2 subsequent siblings)
3 siblings, 0 replies; 12+ messages in thread
From: Manasi Navare @ 2016-10-26 1:16 UTC (permalink / raw)
To: intel-gfx; +Cc: dri-devel, Daniel Vetter
The link status connector property is attached to the drm
object in DP initialization.
This also defines a helper function to set the property value.
This will be used to set the link sttaus to Bad in case
of link training failures.
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3c2293b..dd0d372 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4674,6 +4674,22 @@ static int intel_dp_get_modes(struct drm_connector *connector)
}
static int
+intel_dp_set_link_status_property(struct drm_connector *connector,
+ uint64_t val)
+{
+ struct drm_device *dev = connector->dev;
+ int ret = 0;
+
+ ret = drm_object_property_set_value(&connector->base,
+ dev->mode_config.link_status_property,
+ val);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+static int
intel_dp_connector_register(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
@@ -4940,6 +4956,11 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port port)
connector->dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_ASPECT);
intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
+ } else {
+ drm_mode_create_link_status_property(connector->dev);
+ drm_object_attach_property(&connector->base,
+ connector->dev->mode_config.link_status_property,
+ DRM_MODE_LINK_STATUS_GOOD);
}
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 1:16 [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
2016-10-26 1:16 ` [PATCH 2/2] drm/i915: Set link status property for DP connector Manasi Navare
@ 2016-10-26 1:19 ` Manasi Navare
2016-10-26 9:27 ` Chris Wilson
2016-10-26 1:58 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] " Patchwork
2016-10-26 5:52 ` [Intel-gfx] [PATCH 1/2] " Daniel Vetter
3 siblings, 1 reply; 12+ messages in thread
From: Manasi Navare @ 2016-10-26 1:19 UTC (permalink / raw)
To: intel-gfx; +Cc: Daniel Vetter, dri-devel
Chris,
Would you be able to make the necessary changes in the suerspace
driver so I can do some testing tomorrow?
Manasi
On Tue, Oct 25, 2016 at 06:16:34PM -0700, Manasi Navare wrote:
> A new optional connector property is added for keeping
> track of whether the link is good (link training passed) or
> link is bad (link training failed). If the link status property
> is Bad, then userspace should fire off a new modeset at the current
> mode even if there have not been any changes in the mode list
> or connector status.
>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> drivers/gpu/drm/drm_connector.c | 32 ++++++++++++++++++++++++++++++++
> include/drm/drm_connector.h | 1 +
> include/drm/drm_crtc.h | 6 ++++++
> include/uapi/drm/drm_mode.h | 4 ++++
> 4 files changed, 43 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2db7fb5..b4ce19f 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -588,6 +588,11 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
> DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
> drm_tv_subconnector_enum_list)
>
> +static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> + { DRM_MODE_LINK_STATUS_GOOD, "Good" },
> + { DRM_MODE_LINK_STATUS_BAD, "Bad" },
> +};
> +
> int drm_connector_create_standard_properties(struct drm_device *dev)
> {
> struct drm_property *prop;
> @@ -845,6 +850,33 @@ int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
> EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
>
> /**
> + * drm_mode_create_link_status_property - Create link status property
> + * @dev: DRM device
> + *
> + * Called by a driver the first time it's needed, must be attached to desired
> + * connectors.
> + * This property is used to indicate whether link sttaus is Good or Bad as
> + * a result fo link training
> + */
> +int drm_mode_create_link_status_property(struct drm_device *dev)
> +{
> + struct drm_property *link_status;
> +
> + if (dev->mode_config.link_status_property)
> + return 0;
> +
> + link_status =
> + drm_property_create_enum(dev, 0, "link-status",
> + drm_link_status_enum_list,
> + ARRAY_SIZE(drm_link_status_enum_list));
> +
> + dev->mode_config.scaling_mode_property = link_status;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_mode_create_link_status_property);
> +
> +/**
> * drm_mode_connector_set_path_property - set tile property on connector
> * @connector: connector to set property on.
> * @path: path to use for property; must not be NULL.
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index fc9d475..7234c0c 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -759,6 +759,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
> int drm_mode_create_scaling_mode_property(struct drm_device *dev);
> int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
> int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
> +int drm_mode_create_link_status_property(struct drm_device *dev);
>
> int drm_mode_connector_set_path_property(struct drm_connector *connector,
> const char *path);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index fa1aa21..3e9c833 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1343,6 +1343,12 @@ struct drm_mode_config {
> */
> struct drm_property *suggested_y_property;
>
> + /**
> + * @link_status_property: Optional connector property for link status
> + * of the connector as a result of link training.
> + */
> + struct drm_property *link_status_property;
> +
> /* dumb ioctl parameters */
> uint32_t preferred_depth, prefer_shadow;
>
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 084b50a..f1b0afd 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -121,6 +121,10 @@
> #define DRM_MODE_DIRTY_ON 1
> #define DRM_MODE_DIRTY_ANNOTATE 2
>
> +/* Link Status options */
> +#define DRM_MODE_LINK_STATUS_GOOD 0
> +#define DRM_MODE_LINK_STATUS_BAD 1
> +
> struct drm_mode_modeinfo {
> __u32 clock;
> __u16 hdisplay;
> --
> 1.9.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 1:19 ` [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
@ 2016-10-26 9:27 ` Chris Wilson
0 siblings, 0 replies; 12+ messages in thread
From: Chris Wilson @ 2016-10-26 9:27 UTC (permalink / raw)
To: Manasi Navare; +Cc: Daniel Vetter, intel-gfx, dri-devel
On Tue, Oct 25, 2016 at 06:19:47PM -0700, Manasi Navare wrote:
> Chris,
>
> Would you be able to make the necessary changes in the suerspace
> driver so I can do some testing tomorrow?
>
> Manasi
>
> On Tue, Oct 25, 2016 at 06:16:34PM -0700, Manasi Navare wrote:
> > A new optional connector property is added for keeping
> > track of whether the link is good (link training passed) or
> > link is bad (link training failed). If the link status property
> > is Bad, then userspace should fire off a new modeset at the current
> > mode even if there have not been any changes in the mode list
> > or connector status.
> >
> > Cc: dri-devel@lists.freedesktop.org
> > Cc: Jani Nikula <jani.nikula@linux.intel.com>
> > Cc: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> > Cc: Chris Wilson <chris@chris-wilson.co.uk>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> > drivers/gpu/drm/drm_connector.c | 32 ++++++++++++++++++++++++++++++++
> > include/drm/drm_connector.h | 1 +
> > include/drm/drm_crtc.h | 6 ++++++
> > include/uapi/drm/drm_mode.h | 4 ++++
> > 4 files changed, 43 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> > index 2db7fb5..b4ce19f 100644
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -588,6 +588,11 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
> > drm_tv_subconnector_enum_list)
> >
> > +static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> > + { DRM_MODE_LINK_STATUS_GOOD, "Good" },
> > + { DRM_MODE_LINK_STATUS_BAD, "Bad" },
> > +};
> > +
> > int drm_connector_create_standard_properties(struct drm_device *dev)
> > {
> > struct drm_property *prop;
> > @@ -845,6 +850,33 @@ int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
> > EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
> >
> > /**
> > + * drm_mode_create_link_status_property - Create link status property
> > + * @dev: DRM device
> > + *
> > + * Called by a driver the first time it's needed, must be attached to desired
> > + * connectors.
> > + * This property is used to indicate whether link sttaus is Good or Bad as
> > + * a result fo link training
> > + */
> > +int drm_mode_create_link_status_property(struct drm_device *dev)
> > +{
> > + struct drm_property *link_status;
> > +
> > + if (dev->mode_config.link_status_property)
> > + return 0;
> > +
> > + link_status =
> > + drm_property_create_enum(dev, 0, "link-status",
s/0/DRM_MODE_PROP_IMMUTABLE/
Bikeshed commitee: "link-status" or "link status" or "Link status"
"Good" or "good"
Do we want a general term such as bad or more specific error? Anything
not !good is an error, so we are always free to add more if need be.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* ✗ Fi.CI.BAT: failure for series starting with [1/2] drm: Add a new connector property for link status
2016-10-26 1:16 [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
2016-10-26 1:16 ` [PATCH 2/2] drm/i915: Set link status property for DP connector Manasi Navare
2016-10-26 1:19 ` [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
@ 2016-10-26 1:58 ` Patchwork
2016-10-26 5:52 ` [Intel-gfx] [PATCH 1/2] " Daniel Vetter
3 siblings, 0 replies; 12+ messages in thread
From: Patchwork @ 2016-10-26 1:58 UTC (permalink / raw)
To: Navare, Manasi D; +Cc: intel-gfx
== Series Details ==
Series: series starting with [1/2] drm: Add a new connector property for link status
URL : https://patchwork.freedesktop.org/series/14374/
State : failure
== Summary ==
Series 14374v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/14374/revisions/1/mbox/
Test drv_module_reload_basic:
dmesg-warn -> PASS (fi-skl-6700hq)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> DMESG-WARN (fi-skl-6700hq)
Test kms_busy:
Subgroup basic-flip-default-a:
pass -> INCOMPLETE (fi-skl-6260u)
pass -> INCOMPLETE (fi-bxt-t5700)
pass -> INCOMPLETE (fi-skl-6770hq)
skip -> INCOMPLETE (fi-bsw-n3050)
pass -> INCOMPLETE (fi-ilk-650)
pass -> INCOMPLETE (fi-hsw-4770)
pass -> INCOMPLETE (fi-byt-j1900)
pass -> INCOMPLETE (fi-snb-2520m)
pass -> INCOMPLETE (fi-hsw-4770r)
pass -> INCOMPLETE (fi-kbl-7200u)
pass -> INCOMPLETE (fi-bdw-5557u)
pass -> INCOMPLETE (fi-skl-6700k)
pass -> INCOMPLETE (fi-skl-6700hq)
pass -> INCOMPLETE (fi-snb-2600)
pass -> INCOMPLETE (fi-ivb-3770)
pass -> INCOMPLETE (fi-byt-n2820)
pass -> INCOMPLETE (fi-ivb-3520m)
fi-bdw-5557u total:168 pass:161 dwarn:0 dfail:0 fail:0 skip:6
fi-bsw-n3050 total:168 pass:149 dwarn:0 dfail:0 fail:0 skip:18
fi-bxt-t5700 total:168 pass:149 dwarn:0 dfail:0 fail:0 skip:18
fi-byt-j1900 total:168 pass:148 dwarn:0 dfail:0 fail:0 skip:19
fi-byt-n2820 total:168 pass:148 dwarn:0 dfail:0 fail:0 skip:19
fi-hsw-4770 total:168 pass:154 dwarn:0 dfail:0 fail:0 skip:13
fi-hsw-4770r total:168 pass:154 dwarn:0 dfail:0 fail:0 skip:13
fi-ilk-650 total:168 pass:127 dwarn:0 dfail:0 fail:0 skip:40
fi-ivb-3520m total:168 pass:149 dwarn:0 dfail:0 fail:0 skip:18
fi-ivb-3770 total:168 pass:149 dwarn:0 dfail:0 fail:0 skip:18
fi-kbl-7200u total:168 pass:152 dwarn:0 dfail:0 fail:0 skip:15
fi-skl-6260u total:168 pass:162 dwarn:0 dfail:0 fail:0 skip:5
fi-skl-6700hq total:168 pass:151 dwarn:1 dfail:0 fail:0 skip:15
fi-skl-6700k total:168 pass:151 dwarn:1 dfail:0 fail:0 skip:15
fi-skl-6770hq total:168 pass:162 dwarn:0 dfail:0 fail:0 skip:5
fi-snb-2520m total:168 pass:144 dwarn:0 dfail:0 fail:0 skip:23
fi-snb-2600 total:168 pass:144 dwarn:0 dfail:0 fail:0 skip:23
f746a2112fbb563743acc132304075706551d123 drm-intel-nightly: 2016y-10m-25d-20h-02m-34s UTC integration manifest
9181ffc drm/i915: Set link status property for DP connector
59ae3f6 drm: Add a new connector property for link status
Full results at https://intel-gfx-ci.01.org/CI/Patchwork_2819/
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2819/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Intel-gfx] [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 1:16 [PATCH 1/2] drm: Add a new connector property for link status Manasi Navare
` (2 preceding siblings ...)
2016-10-26 1:58 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] " Patchwork
@ 2016-10-26 5:52 ` Daniel Vetter
2016-10-26 9:42 ` Chris Wilson
3 siblings, 1 reply; 12+ messages in thread
From: Daniel Vetter @ 2016-10-26 5:52 UTC (permalink / raw)
To: Manasi Navare; +Cc: Daniel Vetter, intel-gfx, dri-devel
On Tue, Oct 25, 2016 at 06:16:34PM -0700, Manasi Navare wrote:
> A new optional connector property is added for keeping
> track of whether the link is good (link training passed) or
> link is bad (link training failed). If the link status property
> is Bad, then userspace should fire off a new modeset at the current
> mode even if there have not been any changes in the mode list
> or connector status.
>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> drivers/gpu/drm/drm_connector.c | 32 ++++++++++++++++++++++++++++++++
> include/drm/drm_connector.h | 1 +
> include/drm/drm_crtc.h | 6 ++++++
> include/uapi/drm/drm_mode.h | 4 ++++
> 4 files changed, 43 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2db7fb5..b4ce19f 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -588,6 +588,11 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
> DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
> drm_tv_subconnector_enum_list)
>
> +static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> + { DRM_MODE_LINK_STATUS_GOOD, "Good" },
> + { DRM_MODE_LINK_STATUS_BAD, "Bad" },
> +};
> +
> int drm_connector_create_standard_properties(struct drm_device *dev)
> {
> struct drm_property *prop;
> @@ -845,6 +850,33 @@ int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
> EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
>
> /**
> + * drm_mode_create_link_status_property - Create link status property
> + * @dev: DRM device
> + *
> + * Called by a driver the first time it's needed, must be attached to desired
> + * connectors.
> + * This property is used to indicate whether link sttaus is Good or Bad as
> + * a result fo link training
> + */
> +int drm_mode_create_link_status_property(struct drm_device *dev)
I'd go further and just always create this as one of the standard
properties (and always attach it to the connector, like edid), and only
expose helpers to set the link status to good or bad.
-Daniel
> +{
> + struct drm_property *link_status;
> +
> + if (dev->mode_config.link_status_property)
> + return 0;
> +
> + link_status =
> + drm_property_create_enum(dev, 0, "link-status",
> + drm_link_status_enum_list,
> + ARRAY_SIZE(drm_link_status_enum_list));
> +
> + dev->mode_config.scaling_mode_property = link_status;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_mode_create_link_status_property);
> +
> +/**
> * drm_mode_connector_set_path_property - set tile property on connector
> * @connector: connector to set property on.
> * @path: path to use for property; must not be NULL.
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index fc9d475..7234c0c 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -759,6 +759,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
> int drm_mode_create_scaling_mode_property(struct drm_device *dev);
> int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
> int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
> +int drm_mode_create_link_status_property(struct drm_device *dev);
>
> int drm_mode_connector_set_path_property(struct drm_connector *connector,
> const char *path);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index fa1aa21..3e9c833 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1343,6 +1343,12 @@ struct drm_mode_config {
> */
> struct drm_property *suggested_y_property;
>
> + /**
> + * @link_status_property: Optional connector property for link status
> + * of the connector as a result of link training.
> + */
> + struct drm_property *link_status_property;
> +
> /* dumb ioctl parameters */
> uint32_t preferred_depth, prefer_shadow;
>
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 084b50a..f1b0afd 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -121,6 +121,10 @@
> #define DRM_MODE_DIRTY_ON 1
> #define DRM_MODE_DIRTY_ANNOTATE 2
>
> +/* Link Status options */
> +#define DRM_MODE_LINK_STATUS_GOOD 0
> +#define DRM_MODE_LINK_STATUS_BAD 1
> +
> struct drm_mode_modeinfo {
> __u32 clock;
> __u16 hdisplay;
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 5:52 ` [Intel-gfx] [PATCH 1/2] " Daniel Vetter
@ 2016-10-26 9:42 ` Chris Wilson
2016-10-26 9:51 ` Jani Nikula
0 siblings, 1 reply; 12+ messages in thread
From: Chris Wilson @ 2016-10-26 9:42 UTC (permalink / raw)
To: Daniel Vetter; +Cc: Daniel Vetter, intel-gfx, dri-devel
On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
> I'd go further and just always create this as one of the standard
> properties (and always attach it to the connector, like edid), and only
> expose helpers to set the link status to good or bad.
One of the sketches for this idea was that this could serve as the
failure notification path for nonblocking modesets (well modesets in
general since it appears returning the error is not going to happen).
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 9:42 ` Chris Wilson
@ 2016-10-26 9:51 ` Jani Nikula
2016-10-26 11:17 ` [Intel-gfx] " Ville Syrjälä
0 siblings, 1 reply; 12+ messages in thread
From: Jani Nikula @ 2016-10-26 9:51 UTC (permalink / raw)
To: Chris Wilson, Daniel Vetter; +Cc: Daniel Vetter, intel-gfx, dri-devel
On Wed, 26 Oct 2016, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
>> I'd go further and just always create this as one of the standard
>> properties (and always attach it to the connector, like edid), and only
>> expose helpers to set the link status to good or bad.
>
> One of the sketches for this idea was that this could serve as the
> failure notification path for nonblocking modesets (well modesets in
> general since it appears returning the error is not going to happen).
In nonblocking modesets, when should we change the status from bad to
good? If the setcrtc returns and userspace looks at link status and sees
it's still bad (because the kernel hasn't gotten around to enabling the
link yet, or whatever), userspace might think it would have to try
again. Do we set it to good immediately on setcrtc ioctl, or add a
"pending" status? Or something better?
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Intel-gfx] [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 9:51 ` Jani Nikula
@ 2016-10-26 11:17 ` Ville Syrjälä
2016-10-26 13:11 ` Chris Wilson
0 siblings, 1 reply; 12+ messages in thread
From: Ville Syrjälä @ 2016-10-26 11:17 UTC (permalink / raw)
To: Jani Nikula; +Cc: intel-gfx, dri-devel, Manasi Navare, Daniel Vetter
On Wed, Oct 26, 2016 at 12:51:41PM +0300, Jani Nikula wrote:
> On Wed, 26 Oct 2016, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
> >> I'd go further and just always create this as one of the standard
> >> properties (and always attach it to the connector, like edid), and only
> >> expose helpers to set the link status to good or bad.
> >
> > One of the sketches for this idea was that this could serve as the
> > failure notification path for nonblocking modesets (well modesets in
> > general since it appears returning the error is not going to happen).
>
> In nonblocking modesets, when should we change the status from bad to
> good? If the setcrtc returns and userspace looks at link status and sees
> it's still bad (because the kernel hasn't gotten around to enabling the
> link yet, or whatever), userspace might think it would have to try
> again. Do we set it to good immediately on setcrtc ioctl, or add a
> "pending" status? Or something better?
I was thinking it'd start out as "good" and only change to something
else when things actually go south.
Not sure if we should also want "off" as one of the values, for when
it's really off at the request of the user.
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 11:17 ` [Intel-gfx] " Ville Syrjälä
@ 2016-10-26 13:11 ` Chris Wilson
2016-10-26 13:15 ` Ville Syrjälä
0 siblings, 1 reply; 12+ messages in thread
From: Chris Wilson @ 2016-10-26 13:11 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: intel-gfx, dri-devel, Daniel Vetter
On Wed, Oct 26, 2016 at 02:17:16PM +0300, Ville Syrjälä wrote:
> On Wed, Oct 26, 2016 at 12:51:41PM +0300, Jani Nikula wrote:
> > On Wed, 26 Oct 2016, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > > On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
> > >> I'd go further and just always create this as one of the standard
> > >> properties (and always attach it to the connector, like edid), and only
> > >> expose helpers to set the link status to good or bad.
> > >
> > > One of the sketches for this idea was that this could serve as the
> > > failure notification path for nonblocking modesets (well modesets in
> > > general since it appears returning the error is not going to happen).
> >
> > In nonblocking modesets, when should we change the status from bad to
> > good? If the setcrtc returns and userspace looks at link status and sees
> > it's still bad (because the kernel hasn't gotten around to enabling the
> > link yet, or whatever), userspace might think it would have to try
> > again. Do we set it to good immediately on setcrtc ioctl, or add a
> > "pending" status? Or something better?
>
> I was thinking it'd start out as "good" and only change to something
> else when things actually go south.
>
> Not sure if we should also want "off" as one of the values, for when
> it's really off at the request of the user.
That's something the user knows. At least, if the ddx has output->crtc
set and sees that link-status=off the response is to say "that can't be
me!" and reapply the desired mode, i.e. same response as if the
link-status was bad. Maybe useful for someone else to differentiate?
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 13:11 ` Chris Wilson
@ 2016-10-26 13:15 ` Ville Syrjälä
2016-10-26 13:29 ` [Intel-gfx] " Chris Wilson
0 siblings, 1 reply; 12+ messages in thread
From: Ville Syrjälä @ 2016-10-26 13:15 UTC (permalink / raw)
To: Chris Wilson, Jani Nikula, Daniel Vetter, Manasi Navare,
Daniel Vetter, intel-gfx, dri-devel
On Wed, Oct 26, 2016 at 02:11:00PM +0100, Chris Wilson wrote:
> On Wed, Oct 26, 2016 at 02:17:16PM +0300, Ville Syrjälä wrote:
> > On Wed, Oct 26, 2016 at 12:51:41PM +0300, Jani Nikula wrote:
> > > On Wed, 26 Oct 2016, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > > > On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
> > > >> I'd go further and just always create this as one of the standard
> > > >> properties (and always attach it to the connector, like edid), and only
> > > >> expose helpers to set the link status to good or bad.
> > > >
> > > > One of the sketches for this idea was that this could serve as the
> > > > failure notification path for nonblocking modesets (well modesets in
> > > > general since it appears returning the error is not going to happen).
> > >
> > > In nonblocking modesets, when should we change the status from bad to
> > > good? If the setcrtc returns and userspace looks at link status and sees
> > > it's still bad (because the kernel hasn't gotten around to enabling the
> > > link yet, or whatever), userspace might think it would have to try
> > > again. Do we set it to good immediately on setcrtc ioctl, or add a
> > > "pending" status? Or something better?
> >
> > I was thinking it'd start out as "good" and only change to something
> > else when things actually go south.
> >
> > Not sure if we should also want "off" as one of the values, for when
> > it's really off at the request of the user.
>
> That's something the user knows. At least, if the ddx has output->crtc
> set and sees that link-status=off the response is to say "that can't be
> me!" and reapply the desired mode, i.e. same response as if the
> link-status was bad. Maybe useful for someone else to differentiate?
Dunno really. If we don't add it we have to define what the link status
will indicate when the thing is really off though. With "good" and "bad"
the only options I guess "good" would be the right answer?
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Intel-gfx] [PATCH 1/2] drm: Add a new connector property for link status
2016-10-26 13:15 ` Ville Syrjälä
@ 2016-10-26 13:29 ` Chris Wilson
0 siblings, 0 replies; 12+ messages in thread
From: Chris Wilson @ 2016-10-26 13:29 UTC (permalink / raw)
To: Ville Syrjälä
Cc: intel-gfx, dri-devel, Manasi Navare, Daniel Vetter
On Wed, Oct 26, 2016 at 04:15:39PM +0300, Ville Syrjälä wrote:
> On Wed, Oct 26, 2016 at 02:11:00PM +0100, Chris Wilson wrote:
> > On Wed, Oct 26, 2016 at 02:17:16PM +0300, Ville Syrjälä wrote:
> > > On Wed, Oct 26, 2016 at 12:51:41PM +0300, Jani Nikula wrote:
> > > > On Wed, 26 Oct 2016, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > > > > On Wed, Oct 26, 2016 at 07:52:26AM +0200, Daniel Vetter wrote:
> > > > >> I'd go further and just always create this as one of the standard
> > > > >> properties (and always attach it to the connector, like edid), and only
> > > > >> expose helpers to set the link status to good or bad.
> > > > >
> > > > > One of the sketches for this idea was that this could serve as the
> > > > > failure notification path for nonblocking modesets (well modesets in
> > > > > general since it appears returning the error is not going to happen).
> > > >
> > > > In nonblocking modesets, when should we change the status from bad to
> > > > good? If the setcrtc returns and userspace looks at link status and sees
> > > > it's still bad (because the kernel hasn't gotten around to enabling the
> > > > link yet, or whatever), userspace might think it would have to try
> > > > again. Do we set it to good immediately on setcrtc ioctl, or add a
> > > > "pending" status? Or something better?
> > >
> > > I was thinking it'd start out as "good" and only change to something
> > > else when things actually go south.
> > >
> > > Not sure if we should also want "off" as one of the values, for when
> > > it's really off at the request of the user.
> >
> > That's something the user knows. At least, if the ddx has output->crtc
> > set and sees that link-status=off the response is to say "that can't be
> > me!" and reapply the desired mode, i.e. same response as if the
> > link-status was bad. Maybe useful for someone else to differentiate?
>
> Dunno really. If we don't add it we have to define what the link status
> will indicate when the thing is really off though. With "good" and "bad"
> the only options I guess "good" would be the right answer?
Fair point.
bad = -1, (any specific error can then be -value)
ok = 0,
suspend,
standy,
off, [looking suspiciously like dpms modes :]
?
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 12+ messages in thread