[PATCH v12 21/22] docs: Sample driver to demonstrate how to use Mediated device framework.

[Kirti Wankhede <kwankhede@nvidia.com>]

The Sample driver creates mdev device that simulates serial port over PCI
card.

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Neo Jia <cjia@nvidia.com>
Change-Id: I857f8f12f8b275f2498dfe8c628a5cdc7193b1b2
---
 Documentation/vfio-mediated-device.txt |  103 ++-
 samples/vfio-mdev/Makefile             |   13 +
 samples/vfio-mdev/mtty.c               | 1503 ++++++++++++++++++++++++++++++++
 3 files changed, 1618 insertions(+), 1 deletion(-)
 create mode 100644 samples/vfio-mdev/Makefile
 create mode 100644 samples/vfio-mdev/mtty.c

diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt
index fe8bd2e7b26a..0d2e402af7bb 100644
--- a/Documentation/vfio-mediated-device.txt
+++ b/Documentation/vfio-mediated-device.txt
@@ -289,8 +289,109 @@ these callbacks are supported in the TYPE1 IOMMU module. To enable them for
 other IOMMU backend modules, such as PPC64 sPAPR module, they need to provide
 these two callback functions.
 
+Using the Sample Code
+=====================
+
+mtty.c in samples/vfio-mdev/ directory is a sample driver program to
+demonstrate how to use the mediated device framework.
+
+The sample driver creates an mdev device that simulates a serial port over a PCI
+card.
+
+1. Build and load the mtty.ko module.
+
+   This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
+
+   Files in this device directory in sysfs are similar to the following:
+
+   # tree /sys/devices/virtual/mtty/mtty/
+      /sys/devices/virtual/mtty/mtty/
+      |-- mdev_supported_types
+      |   |-- mtty-1
+      |   |   |-- available_instances
+      |   |   |-- create
+      |   |   |-- device_api
+      |   |   |-- devices
+      |   |   `-- name
+      |   `-- mtty-2
+      |       |-- available_instances
+      |       |-- create
+      |       |-- device_api
+      |       |-- devices
+      |       `-- name
+      |-- mtty_dev
+      |   `-- sample_mtty_dev
+      |-- power
+      |   |-- autosuspend_delay_ms
+      |   |-- control
+      |   |-- runtime_active_time
+      |   |-- runtime_status
+      |   `-- runtime_suspended_time
+      |-- subsystem -> ../../../../class/mtty
+      `-- uevent
+
+2. Create a mediated device by using the dummy device that you created in the
+   previous step.
+
+   # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" >	\
+              /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
+
+3. Add parameters to qemu-kvm.
+
+   -device vfio-pci,\
+    sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
+
+4. Boot the VM.
+
+   In the Linux guest VM, with no hardware on the host, the device appears
+   as  follows:
+
+   # lspci -s 00:05.0 -xxvv
+   00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
+           Subsystem: Device 4348:3253
+           Physical Slot: 5
+           Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
+   Stepping- SERR- FastB2B- DisINTx-
+           Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
+   <TAbort- <MAbort- >SERR- <PERR- INTx-
+           Interrupt: pin A routed to IRQ 10
+           Region 0: I/O ports at c150 [size=8]
+           Region 1: I/O ports at c158 [size=8]
+           Kernel driver in use: serial
+   00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
+   10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
+   20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
+   30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
+
+   In the Linux guest VM, dmesg output for the device is as follows:
+
+   serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ
+10
+   0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
+   0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
+
+
+5. In the Linux guest VM, check the serial ports.
+
+   # setserial -g /dev/ttyS*
+   /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
+   /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
+   /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
+
+6. Using a minicom or any terminal enulation program, open port /dev/ttyS1 or
+   /dev/ttyS2 with hardware flow control disabled.
+
+7. Type data on the minicom terminal or send data to the terminal emulation
+   program and read the data.
+
+   Data is loop backed from hosts mtty driver.
+
+8. Destroy the mediated device that you created.
+
+   # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
+
 References
-----------
+==========
 
 [1] See Documentation/vfio.txt for more information on VFIO.
 [2] struct mdev_driver in include/linux/mdev.h
diff --git a/samples/vfio-mdev/Makefile b/samples/vfio-mdev/Makefile
new file mode 100644
index 000000000000..a932edbe38eb
--- /dev/null
+++ b/samples/vfio-mdev/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for mtty.c file
+#
+KERNEL_DIR:=/lib/modules/$(shell uname -r)/build
+
+obj-m:=mtty.o
+
+modules clean modules_install:
+	$(MAKE) -C $(KERNEL_DIR) SUBDIRS=$(PWD) $@
+
+default: modules
+
+module: modules
diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
new file mode 100644
index 000000000000..6b633a4ea333
--- /dev/null
+++ b/samples/vfio-mdev/mtty.c
@@ -0,0 +1,1503 @@
+/*
+ * Mediated virtual PCI serial host device driver
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *     Author: Neo Jia <cjia@nvidia.com>
+ *             Kirti Wankhede <kwankhede@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Sample driver that creates mdev device that simulates serial port over PCI
+ * card.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/cdev.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/uuid.h>
+#include <linux/vfio.h>
+#include <linux/iommu.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/file.h>
+#include <linux/mdev.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <uapi/linux/serial_reg.h>
+#include <linux/eventfd.h>
+/*
+ * #defines
+ */
+
+#define VERSION_STRING  "0.1"
+#define DRIVER_AUTHOR   "NVIDIA Corporation"
+
+#define MTTY_CLASS_NAME "mtty"
+
+#define MTTY_NAME       "mtty"
+
+#define MTTY_STRING_LEN		16
+
+#define MTTY_CONFIG_SPACE_SIZE  0xff
+#define MTTY_IO_BAR_SIZE        0x8
+#define MTTY_MMIO_BAR_SIZE      0x100000
+
+#define STORE_LE16(addr, val)   (*(u16 *)addr = val)
+#define STORE_LE32(addr, val)   (*(u32 *)addr = val)
+
+#define MAX_FIFO_SIZE   16
+
+#define CIRCULAR_BUF_INC_IDX(idx)    (idx = (idx + 1) & (MAX_FIFO_SIZE - 1))
+
+#define MTTY_VFIO_PCI_OFFSET_SHIFT   40
+
+#define MTTY_VFIO_PCI_OFFSET_TO_INDEX(off)   (off >> MTTY_VFIO_PCI_OFFSET_SHIFT)
+#define MTTY_VFIO_PCI_INDEX_TO_OFFSET(index) \
+				((u64)(index) << MTTY_VFIO_PCI_OFFSET_SHIFT)
+#define MTTY_VFIO_PCI_OFFSET_MASK    \
+				(((u64)(1) << MTTY_VFIO_PCI_OFFSET_SHIFT) - 1)
+#define MAX_MTTYS	24
+
+/*
+ * Global Structures
+ */
+
+struct mtty_dev {
+	dev_t		vd_devt;
+	struct class	*vd_class;
+	struct cdev	vd_cdev;
+	struct idr	vd_idr;
+	struct device	dev;
+} mtty_dev;
+
+struct mdev_region_info {
+	u64 start;
+	u64 phys_start;
+	u32 size;
+	u64 vfio_offset;
+};
+
+#if defined(DEBUG_REGS)
+const char *wr_reg[] = {
+	"TX",
+	"IER",
+	"FCR",
+	"LCR",
+	"MCR",
+	"LSR",
+	"MSR",
+	"SCR"
+};
+
+const char *rd_reg[] = {
+	"RX",
+	"IER",
+	"IIR",
+	"LCR",
+	"MCR",
+	"LSR",
+	"MSR",
+	"SCR"
+};
+#endif
+
+/* loop back buffer */
+struct rxtx {
+	u8 fifo[MAX_FIFO_SIZE];
+	u8 head, tail;
+	u8 count;
+};
+
+struct serial_port {
+	u8 uart_reg[8];         /* 8 registers */
+	struct rxtx rxtx;       /* loop back buffer */
+	bool dlab;
+	bool overrun;
+	u16 divisor;
+	u8 fcr;                 /* FIFO control register */
+	u8 max_fifo_size;
+	u8 intr_trigger_level;  /* interrupt trigger level */
+};
+
+/* State of each mdev device */
+struct mdev_state {
+	int irq_fd;
+	struct eventfd_ctx *intx_evtfd;
+	struct eventfd_ctx *msi_evtfd;
+	int irq_index;
+	u8 *vconfig;
+	struct mutex ops_lock;
+	struct mdev_device *mdev;
+	struct mdev_region_info region_info[VFIO_PCI_NUM_REGIONS];
+	u32 bar_mask[VFIO_PCI_NUM_REGIONS];
+	struct list_head next;
+	struct serial_port s[2];
+	struct mutex rxtx_lock;
+	struct vfio_device_info dev_info;
+	int nr_ports;
+};
+
+struct mutex mdev_list_lock;
+struct list_head mdev_devices_list;
+
+static const struct file_operations vd_fops = {
+	.owner          = THIS_MODULE,
+};
+
+/* function prototypes */
+
+static int mtty_trigger_interrupt(uuid_le uuid);
+
+/* Helper functions */
+static struct mdev_state *find_mdev_state_by_uuid(uuid_le uuid)
+{
+	struct mdev_state *mds;
+
+	list_for_each_entry(mds, &mdev_devices_list, next) {
+		if (uuid_le_cmp(mds->mdev->uuid, uuid) == 0)
+			return mds;
+	}
+
+	return NULL;
+}
+
+void dump_buffer(char *buf, uint32_t count)
+{
+#if defined(DEBUG)
+	int i;
+
+	pr_info("Buffer:\n");
+	for (i = 0; i < count; i++) {
+		pr_info("%2x ", *(buf + i));
+		if ((i + 1) % 16 == 0)
+			pr_info("\n");
+	}
+#endif
+}
+
+static void mtty_create_config_space(struct mdev_state *mdev_state)
+{
+	/* PCI dev ID */
+	STORE_LE32((u32 *) &mdev_state->vconfig[0x0], 0x32534348);
+
+	/* Control: I/O+, Mem-, BusMaster- */
+	STORE_LE16((u16 *) &mdev_state->vconfig[0x4], 0x0001);
+
+	/* Status: capabilities list absent */
+	STORE_LE16((u16 *) &mdev_state->vconfig[0x6], 0x0200);
+
+	/* Rev ID */
+	mdev_state->vconfig[0x8] =  0x10;
+
+	/* programming interface class : 16550-compatible serial controller */
+	mdev_state->vconfig[0x9] =  0x02;
+
+	/* Sub class : 00 */
+	mdev_state->vconfig[0xa] =  0x00;
+
+	/* Base class : Simple Communication controllers */
+	mdev_state->vconfig[0xb] =  0x07;
+
+	/* base address registers */
+	/* BAR0: IO space */
+	STORE_LE32((u32 *) &mdev_state->vconfig[0x10], 0x000001);
+	mdev_state->bar_mask[0] = ~(MTTY_IO_BAR_SIZE) + 1;
+
+	if (mdev_state->nr_ports == 2) {
+		/* BAR1: IO space */
+		STORE_LE32((u32 *) &mdev_state->vconfig[0x14], 0x000001);
+		mdev_state->bar_mask[1] = ~(MTTY_IO_BAR_SIZE) + 1;
+	}
+
+	/* Subsystem ID */
+	STORE_LE32((u32 *) &mdev_state->vconfig[0x2c], 0x32534348);
+
+	mdev_state->vconfig[0x34] =  0x00;   /* Cap Ptr */
+	mdev_state->vconfig[0x3d] =  0x01;   /* interrupt pin (INTA#) */
+
+	/* Vendor specific data */
+	mdev_state->vconfig[0x40] =  0x23;
+	mdev_state->vconfig[0x43] =  0x80;
+	mdev_state->vconfig[0x44] =  0x23;
+	mdev_state->vconfig[0x48] =  0x23;
+	mdev_state->vconfig[0x4c] =  0x23;
+
+	mdev_state->vconfig[0x60] =  0x50;
+	mdev_state->vconfig[0x61] =  0x43;
+	mdev_state->vconfig[0x62] =  0x49;
+	mdev_state->vconfig[0x63] =  0x20;
+	mdev_state->vconfig[0x64] =  0x53;
+	mdev_state->vconfig[0x65] =  0x65;
+	mdev_state->vconfig[0x66] =  0x72;
+	mdev_state->vconfig[0x67] =  0x69;
+	mdev_state->vconfig[0x68] =  0x61;
+	mdev_state->vconfig[0x69] =  0x6c;
+	mdev_state->vconfig[0x6a] =  0x2f;
+	mdev_state->vconfig[0x6b] =  0x55;
+	mdev_state->vconfig[0x6c] =  0x41;
+	mdev_state->vconfig[0x6d] =  0x52;
+	mdev_state->vconfig[0x6e] =  0x54;
+}
+
+static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset,
+				 char *buf, u32 count)
+{
+	u32 cfg_addr, bar_mask, bar_index = 0;
+
+	switch (offset) {
+	case 0x04: /* device control */
+	case 0x06: /* device status */
+		/* do nothing */
+		break;
+	case 0x3c:  /* interrupt line */
+		mdev_state->vconfig[0x3c] = buf[0];
+		break;
+	case 0x3d:
+		/*
+		 * Interrupt Pin is hardwired to INTA.
+		 * This field is write protected by hardware
+		 */
+		break;
+	case 0x10:  /* BAR0 */
+	case 0x14:  /* BAR1 */
+		if (offset == 0x10)
+			bar_index = 0;
+		else if (offset == 0x14)
+			bar_index = 1;
+
+		if ((mdev_state->nr_ports == 1) && (bar_index == 1)) {
+			STORE_LE32(&mdev_state->vconfig[offset], 0);
+			break;
+		}
+
+		cfg_addr = *(u32 *)buf;
+		pr_info("BAR%d addr 0x%x\n", bar_index, cfg_addr);
+
+		if (cfg_addr == 0xffffffff) {
+			bar_mask = mdev_state->bar_mask[bar_index];
+			cfg_addr = (cfg_addr & bar_mask);
+		}
+
+		cfg_addr |= (mdev_state->vconfig[offset] & 0x3ul);
+		STORE_LE32(&mdev_state->vconfig[offset], cfg_addr);
+		break;
+	case 0x18:  /* BAR2 */
+	case 0x1c:  /* BAR3 */
+	case 0x20:  /* BAR4 */
+		STORE_LE32(&mdev_state->vconfig[offset], 0);
+		break;
+	default:
+		pr_info("PCI config write @0x%x of %d bytes not handled\n",
+			offset, count);
+		break;
+	}
+}
+
+static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
+				u16 offset, char *buf, u32 count)
+{
+	u8 data = *buf;
+
+	/* Handle data written by guest */
+	switch (offset) {
+	case UART_TX:
+		/* if DLAB set, data is LSB of divisor */
+		if (mdev_state->s[index].dlab) {
+			mdev_state->s[index].divisor |= data;
+			break;
+		}
+
+		mutex_lock(&mdev_state->rxtx_lock);
+
+		/* save in TX buffer */
+		if (mdev_state->s[index].rxtx.count <
+				mdev_state->s[index].max_fifo_size) {
+			mdev_state->s[index].rxtx.fifo[
+					mdev_state->s[index].rxtx.head] = data;
+			mdev_state->s[index].rxtx.count++;
+			CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.head);
+			mdev_state->s[index].overrun = false;
+
+			/*
+			 * Trigger interrupt if receive data interrupt is
+			 * enabled and fifo reached trigger level
+			 */
+			if ((mdev_state->s[index].uart_reg[UART_IER] &
+						UART_IER_RDI) &&
+			   (mdev_state->s[index].rxtx.count ==
+				    mdev_state->s[index].intr_trigger_level)) {
+				/* trigger interrupt */
+#if defined(DEBUG_INTR)
+				pr_err("Serial port %d: Fifo level trigger\n",
+					index);
+#endif
+				mtty_trigger_interrupt(mdev_state->mdev->uuid);
+			}
+		} else {
+#if defined(DEBUG_INTR)
+			pr_err("Serial port %d: Buffer Overflow\n", index);
+#endif
+			mdev_state->s[index].overrun = true;
+
+			/*
+			 * Trigger interrupt if receiver line status interrupt
+			 * is enabled
+			 */
+			if (mdev_state->s[index].uart_reg[UART_IER] &
+								UART_IER_RLSI)
+				mtty_trigger_interrupt(mdev_state->mdev->uuid);
+		}
+		mutex_unlock(&mdev_state->rxtx_lock);
+		break;
+
+	case UART_IER:
+		/* if DLAB set, data is MSB of divisor */
+		if (mdev_state->s[index].dlab)
+			mdev_state->s[index].divisor |= (u16)data << 8;
+		else {
+			mdev_state->s[index].uart_reg[offset] = data;
+			mutex_lock(&mdev_state->rxtx_lock);
+			if ((data & UART_IER_THRI) &&
+			    (mdev_state->s[index].rxtx.head ==
+					mdev_state->s[index].rxtx.tail)) {
+#if defined(DEBUG_INTR)
+				pr_err("Serial port %d: IER_THRI write\n",
+					index);
+#endif
+				mtty_trigger_interrupt(mdev_state->mdev->uuid);
+			}
+
+			mutex_unlock(&mdev_state->rxtx_lock);
+		}
+
+		break;
+
+	case UART_FCR:
+		mdev_state->s[index].fcr = data;
+
+		mutex_lock(&mdev_state->rxtx_lock);
+		if (data & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)) {
+			/* clear loop back FIFO */
+			mdev_state->s[index].rxtx.count = 0;
+			mdev_state->s[index].rxtx.head = 0;
+			mdev_state->s[index].rxtx.tail = 0;
+		}
+		mutex_unlock(&mdev_state->rxtx_lock);
+
+		switch (data & UART_FCR_TRIGGER_MASK) {
+		case UART_FCR_TRIGGER_1:
+			mdev_state->s[index].intr_trigger_level = 1;
+			break;
+
+		case UART_FCR_TRIGGER_4:
+			mdev_state->s[index].intr_trigger_level = 4;
+			break;
+
+		case UART_FCR_TRIGGER_8:
+			mdev_state->s[index].intr_trigger_level = 8;
+			break;
+
+		case UART_FCR_TRIGGER_14:
+			mdev_state->s[index].intr_trigger_level = 14;
+			break;
+		}
+
+		/*
+		 * Set trigger level to 1 otherwise or  implement timer with
+		 * timeout of 4 characters and on expiring that timer set
+		 * Recevice data timeout in IIR register
+		 */
+		mdev_state->s[index].intr_trigger_level = 1;
+		if (data & UART_FCR_ENABLE_FIFO)
+			mdev_state->s[index].max_fifo_size = MAX_FIFO_SIZE;
+		else {
+			mdev_state->s[index].max_fifo_size = 1;
+			mdev_state->s[index].intr_trigger_level = 1;
+		}
+
+		break;
+
+	case UART_LCR:
+		if (data & UART_LCR_DLAB) {
+			mdev_state->s[index].dlab = true;
+			mdev_state->s[index].divisor = 0;
+		} else
+			mdev_state->s[index].dlab = false;
+
+		mdev_state->s[index].uart_reg[offset] = data;
+		break;
+
+	case UART_MCR:
+		mdev_state->s[index].uart_reg[offset] = data;
+
+		if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) &&
+				(data & UART_MCR_OUT2)) {
+#if defined(DEBUG_INTR)
+			pr_err("Serial port %d: MCR_OUT2 write\n", index);
+#endif
+			mtty_trigger_interrupt(mdev_state->mdev->uuid);
+		}
+
+		if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) &&
+				(data & (UART_MCR_RTS | UART_MCR_DTR))) {
+#if defined(DEBUG_INTR)
+			pr_err("Serial port %d: MCR RTS/DTR write\n", index);
+#endif
+			mtty_trigger_interrupt(mdev_state->mdev->uuid);
+		}
+		break;
+
+	case UART_LSR:
+	case UART_MSR:
+		/* do nothing */
+		break;
+
+	case UART_SCR:
+		mdev_state->s[index].uart_reg[offset] = data;
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state,
+			    u16 offset, char *buf, u32 count)
+{
+	/* Handle read requests by guest */
+	switch (offset) {
+	case UART_RX:
+		/* if DLAB set, data is LSB of divisor */
+		if (mdev_state->s[index].dlab) {
+			*buf  = (u8)mdev_state->s[index].divisor;
+			break;
+		}
+
+		mutex_lock(&mdev_state->rxtx_lock);
+		/* return data in tx buffer */
+		if (mdev_state->s[index].rxtx.head !=
+				 mdev_state->s[index].rxtx.tail) {
+			*buf = mdev_state->s[index].rxtx.fifo[
+						mdev_state->s[index].rxtx.tail];
+			mdev_state->s[index].rxtx.count--;
+			CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.tail);
+		}
+
+		if (mdev_state->s[index].rxtx.head ==
+				mdev_state->s[index].rxtx.tail) {
+		/*
+		 *  Trigger interrupt if tx buffer empty interrupt is
+		 *  enabled and fifo is empty
+		 */
+#if defined(DEBUG_INTR)
+			pr_err("Serial port %d: Buffer Empty\n", index);
+#endif
+			if (mdev_state->s[index].uart_reg[UART_IER] &
+							 UART_IER_THRI)
+				mtty_trigger_interrupt(mdev_state->mdev->uuid);
+		}
+		mutex_unlock(&mdev_state->rxtx_lock);
+
+		break;
+
+	case UART_IER:
+		if (mdev_state->s[index].dlab) {
+			*buf = (u8)(mdev_state->s[index].divisor >> 8);
+			break;
+		}
+		*buf = mdev_state->s[index].uart_reg[offset] & 0x0f;
+		break;
+
+	case UART_IIR:
+	{
+		u8 ier = mdev_state->s[index].uart_reg[UART_IER];
+		*buf = 0;
+
+		mutex_lock(&mdev_state->rxtx_lock);
+		/* Interrupt priority 1: Parity, overrun, framing or break */
+		if ((ier & UART_IER_RLSI) && mdev_state->s[index].overrun)
+			*buf |= UART_IIR_RLSI;
+
+		/* Interrupt priority 2: Fifo trigger level reached */
+		if ((ier & UART_IER_RDI) &&
+		    (mdev_state->s[index].rxtx.count ==
+		      mdev_state->s[index].intr_trigger_level))
+			*buf |= UART_IIR_RDI;
+
+		/* Interrupt priotiry 3: transmitter holding register empty */
+		if ((ier & UART_IER_THRI) &&
+		    (mdev_state->s[index].rxtx.head ==
+				mdev_state->s[index].rxtx.tail))
+			*buf |= UART_IIR_THRI;
+
+		/* Interrupt priotiry 4: Modem status: CTS, DSR, RI or DCD  */
+		if ((ier & UART_IER_MSI) &&
+		    (mdev_state->s[index].uart_reg[UART_MCR] &
+				 (UART_MCR_RTS | UART_MCR_DTR)))
+			*buf |= UART_IIR_MSI;
+
+		/* bit0: 0=> interrupt pending, 1=> no interrupt is pending */
+		if (*buf == 0)
+			*buf = UART_IIR_NO_INT;
+
+		/* set bit 6 & 7 to be 16550 compatible */
+		*buf |= 0xC0;
+		mutex_unlock(&mdev_state->rxtx_lock);
+	}
+	break;
+
+	case UART_LCR:
+	case UART_MCR:
+		*buf = mdev_state->s[index].uart_reg[offset];
+		break;
+
+	case UART_LSR:
+	{
+		u8 lsr = 0;
+
+		mutex_lock(&mdev_state->rxtx_lock);
+		/* atleast one char in FIFO */
+		if (mdev_state->s[index].rxtx.head !=
+				 mdev_state->s[index].rxtx.tail)
+			lsr |= UART_LSR_DR;
+
+		/* if FIFO overrun */
+		if (mdev_state->s[index].overrun)
+			lsr |= UART_LSR_OE;
+
+		/* transmit FIFO empty and tramsitter empty */
+		if (mdev_state->s[index].rxtx.head ==
+				 mdev_state->s[index].rxtx.tail)
+			lsr |= UART_LSR_TEMT | UART_LSR_THRE;
+
+		mutex_unlock(&mdev_state->rxtx_lock);
+		*buf = lsr;
+		break;
+	}
+	case UART_MSR:
+		*buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD;
+
+		mutex_lock(&mdev_state->rxtx_lock);
+		/* if AFE is 1 and FIFO have space, set CTS bit */
+		if (mdev_state->s[index].uart_reg[UART_MCR] &
+						 UART_MCR_AFE) {
+			if (mdev_state->s[index].rxtx.count <
+					mdev_state->s[index].max_fifo_size)
+				*buf |= UART_MSR_CTS | UART_MSR_DCTS;
+		} else
+			*buf |= UART_MSR_CTS | UART_MSR_DCTS;
+		mutex_unlock(&mdev_state->rxtx_lock);
+
+		break;
+
+	case UART_SCR:
+		*buf = mdev_state->s[index].uart_reg[offset];
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void mdev_read_base(struct mdev_state *mdev_state)
+{
+	int index, pos;
+	u32 start_lo, start_hi;
+	u32 mem_type;
+
+	pos = PCI_BASE_ADDRESS_0;
+
+	for (index = 0; index <= VFIO_PCI_BAR5_REGION_INDEX; index++) {
+
+		if (!mdev_state->region_info[index].size)
+			continue;
+
+		start_lo = (*(u32 *)(mdev_state->vconfig + pos)) &
+			PCI_BASE_ADDRESS_MEM_MASK;
+		mem_type = (*(u32 *)(mdev_state->vconfig + pos)) &
+			PCI_BASE_ADDRESS_MEM_TYPE_MASK;
+
+		switch (mem_type) {
+		case PCI_BASE_ADDRESS_MEM_TYPE_64:
+			start_hi = (*(u32 *)(mdev_state->vconfig + pos + 4));
+			pos += 4;
+			break;
+		case PCI_BASE_ADDRESS_MEM_TYPE_32:
+		case PCI_BASE_ADDRESS_MEM_TYPE_1M:
+			/* 1M mem BAR treated as 32-bit BAR */
+		default:
+			/* mem unknown type treated as 32-bit BAR */
+			start_hi = 0;
+			break;
+		}
+		pos += 4;
+		mdev_state->region_info[index].start = ((u64)start_hi << 32) |
+							start_lo;
+	}
+}
+
+static ssize_t mdev_access(struct mdev_device *mdev, char *buf, size_t count,
+			   loff_t pos, bool is_write)
+{
+	struct mdev_state *mdev_state;
+	unsigned int index;
+	loff_t offset;
+	int ret = 0;
+
+	if (!mdev || !buf)
+		return -EINVAL;
+
+	mdev_state = mdev_get_drvdata(mdev);
+	if (!mdev_state) {
+		pr_err("%s mdev_state not found\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&mdev_state->ops_lock);
+
+	index = MTTY_VFIO_PCI_OFFSET_TO_INDEX(pos);
+	offset = pos & MTTY_VFIO_PCI_OFFSET_MASK;
+	switch (index) {
+	case VFIO_PCI_CONFIG_REGION_INDEX:
+
+#if defined(DEBUG)
+		pr_info("%s: PCI config space %s at offset 0x%llx\n",
+			 __func__, is_write ? "write" : "read", offset);
+#endif
+		if (is_write) {
+			dump_buffer(buf, count);
+			handle_pci_cfg_write(mdev_state, offset, buf, count);
+		} else {
+			memcpy(buf, (mdev_state->vconfig + offset), count);
+			dump_buffer(buf, count);
+		}
+
+		break;
+
+	case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
+		if (!mdev_state->region_info[index].start)
+			mdev_read_base(mdev_state);
+
+		if (is_write) {
+			dump_buffer(buf, count);
+
+#if defined(DEBUG_REGS)
+			pr_info("%s: BAR%d  WR @0x%llx %s val:0x%02x dlab:%d\n",
+				__func__, index, offset, wr_reg[offset],
+				(u8)*buf, mdev_state->s[index].dlab);
+#endif
+			handle_bar_write(index, mdev_state, offset, buf, count);
+		} else {
+			handle_bar_read(index, mdev_state, offset, buf, count);
+			dump_buffer(buf, count);
+
+#if defined(DEBUG_REGS)
+			pr_info("%s: BAR%d  RD @0x%llx %s val:0x%02x dlab:%d\n",
+				__func__, index, offset, rd_reg[offset],
+				(u8)*buf, mdev_state->s[index].dlab);
+#endif
+		}
+		break;
+
+	default:
+		ret = -1;
+		goto accessfailed;
+	}
+
+	ret = count;
+
+
+accessfailed:
+	mutex_unlock(&mdev_state->ops_lock);
+
+	return ret;
+}
+
+int mtty_create(struct kobject *kobj, struct mdev_device *mdev)
+{
+	struct mdev_state *mdev_state;
+	char name[MTTY_STRING_LEN];
+	int nr_ports = 0, i;
+
+	if (!mdev)
+		return -EINVAL;
+
+	for (i = 0; i < 2; i++) {
+		snprintf(name, MTTY_STRING_LEN, "%s-%d",
+			dev_driver_string(mdev->parent->dev), i + 1);
+		if (!strcmp(kobj->name, name)) {
+			nr_ports = i + 1;
+			break;
+		}
+	}
+
+	if (!nr_ports)
+		return -EINVAL;
+
+	mdev_state = kzalloc(sizeof(struct mdev_state), GFP_KERNEL);
+	if (mdev_state == NULL)
+		return -ENOMEM;
+
+	mdev_state->nr_ports = nr_ports;
+	mdev_state->irq_index = -1;
+	mdev_state->s[0].max_fifo_size = MAX_FIFO_SIZE;
+	mdev_state->s[1].max_fifo_size = MAX_FIFO_SIZE;
+	mutex_init(&mdev_state->rxtx_lock);
+	mdev_state->vconfig = kzalloc(MTTY_CONFIG_SPACE_SIZE, GFP_KERNEL);
+
+	if (mdev_state->vconfig == NULL) {
+		kfree(mdev_state);
+		return -ENOMEM;
+	}
+
+	mutex_init(&mdev_state->ops_lock);
+	mdev_state->mdev = mdev;
+	mdev_set_drvdata(mdev, mdev_state);
+
+	mtty_create_config_space(mdev_state);
+
+	mutex_lock(&mdev_list_lock);
+	list_add(&mdev_state->next, &mdev_devices_list);
+	mutex_unlock(&mdev_list_lock);
+
+	return 0;
+}
+
+int mtty_remove(struct mdev_device *mdev)
+{
+	struct mdev_state *mds, *tmp_mds;
+	struct mdev_state *mdev_state = mdev_get_drvdata(mdev);
+	int ret = -EINVAL;
+
+	mutex_lock(&mdev_list_lock);
+	list_for_each_entry_safe(mds, tmp_mds, &mdev_devices_list, next) {
+		if (mdev_state == mds) {
+			list_del(&mdev_state->next);
+			mdev_set_drvdata(mdev, NULL);
+			kfree(mdev_state->vconfig);
+			kfree(mdev_state);
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&mdev_list_lock);
+
+	return ret;
+}
+
+int mtty_reset(struct mdev_device *mdev)
+{
+	struct mdev_state *mdev_state;
+
+	if (!mdev)
+		return -EINVAL;
+
+	mdev_state = mdev_get_drvdata(mdev);
+	if (!mdev_state)
+		return -EINVAL;
+
+	pr_info("%s: called\n", __func__);
+
+	return 0;
+}
+
+ssize_t mtty_read(struct mdev_device *mdev, char __user *buf, size_t count,
+		  loff_t *ppos)
+{
+	unsigned int done = 0;
+	int ret;
+
+	while (count) {
+		size_t filled;
+
+		if (count >= 4 && !(*ppos % 4)) {
+			u32 val;
+
+			ret =  mdev_access(mdev, (char *)&val, sizeof(val),
+					   *ppos, false);
+			if (ret <= 0)
+				goto read_err;
+
+			if (copy_to_user(buf, &val, sizeof(val)))
+				goto read_err;
+
+			filled = 4;
+		} else if (count >= 2 && !(*ppos % 2)) {
+			u16 val;
+
+			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+					  *ppos, false);
+			if (ret <= 0)
+				goto read_err;
+
+			if (copy_to_user(buf, &val, sizeof(val)))
+				goto read_err;
+
+			filled = 2;
+		} else {
+			u8 val;
+
+			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+					  *ppos, false);
+			if (ret <= 0)
+				goto read_err;
+
+			if (copy_to_user(buf, &val, sizeof(val)))
+				goto read_err;
+
+			filled = 1;
+		}
+
+		count -= filled;
+		done += filled;
+		*ppos += filled;
+		buf += filled;
+	}
+
+	return done;
+
+read_err:
+	return -EFAULT;
+}
+
+ssize_t mtty_write(struct mdev_device *mdev, const char __user *buf,
+		   size_t count, loff_t *ppos)
+{
+	unsigned int done = 0;
+	int ret;
+
+	while (count) {
+		size_t filled;
+
+		if (count >= 4 && !(*ppos % 4)) {
+			u32 val;
+
+			if (copy_from_user(&val, buf, sizeof(val)))
+				goto write_err;
+
+			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+					  *ppos, true);
+			if (ret <= 0)
+				goto write_err;
+
+			filled = 4;
+		} else if (count >= 2 && !(*ppos % 2)) {
+			u16 val;
+
+			if (copy_from_user(&val, buf, sizeof(val)))
+				goto write_err;
+
+			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+					  *ppos, true);
+			if (ret <= 0)
+				goto write_err;
+
+			filled = 2;
+		} else {
+			u8 val;
+
+			if (copy_from_user(&val, buf, sizeof(val)))
+				goto write_err;
+
+			ret = mdev_access(mdev, (char *)&val, sizeof(val),
+					  *ppos, true);
+			if (ret <= 0)
+				goto write_err;
+
+			filled = 1;
+		}
+		count -= filled;
+		done += filled;
+		*ppos += filled;
+		buf += filled;
+	}
+
+	return done;
+write_err:
+	return -EFAULT;
+}
+
+static int mtty_set_irqs(struct mdev_device *mdev, uint32_t flags,
+			 unsigned int index, unsigned int start,
+			 unsigned int count, void *data)
+{
+	int ret = 0;
+	struct mdev_state *mdev_state;
+
+	if (!mdev)
+		return -EINVAL;
+
+	mdev_state = mdev_get_drvdata(mdev);
+	if (!mdev_state)
+		return -EINVAL;
+
+	mutex_lock(&mdev_state->ops_lock);
+	switch (index) {
+	case VFIO_PCI_INTX_IRQ_INDEX:
+		switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
+		case VFIO_IRQ_SET_ACTION_MASK:
+		case VFIO_IRQ_SET_ACTION_UNMASK:
+			break;
+		case VFIO_IRQ_SET_ACTION_TRIGGER:
+		{
+			if (flags & VFIO_IRQ_SET_DATA_NONE) {
+				pr_info("%s: disable INTx\n", __func__);
+				if (mdev_state->intx_evtfd)
+					eventfd_ctx_put(mdev_state->intx_evtfd);
+				break;
+			}
+
+			if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
+				int fd = *(int *)data;
+
+				if (fd > 0) {
+					struct eventfd_ctx *evt;
+
+					evt = eventfd_ctx_fdget(fd);
+					if (IS_ERR(evt)) {
+						ret = PTR_ERR(evt);
+						break;
+					}
+					mdev_state->intx_evtfd = evt;
+					mdev_state->irq_fd = fd;
+					mdev_state->irq_index = index;
+					break;
+				}
+			}
+			break;
+		}
+		}
+		break;
+	case VFIO_PCI_MSI_IRQ_INDEX:
+		switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
+		case VFIO_IRQ_SET_ACTION_MASK:
+		case VFIO_IRQ_SET_ACTION_UNMASK:
+			break;
+		case VFIO_IRQ_SET_ACTION_TRIGGER:
+			if (flags & VFIO_IRQ_SET_DATA_NONE) {
+				if (mdev_state->msi_evtfd)
+					eventfd_ctx_put(mdev_state->msi_evtfd);
+				pr_info("%s: disable MSI\n", __func__);
+				mdev_state->irq_index = VFIO_PCI_INTX_IRQ_INDEX;
+				break;
+			}
+			if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
+				int fd = *(int *)data;
+				struct eventfd_ctx *evt;
+
+				if (fd <= 0)
+					break;
+
+				if (mdev_state->msi_evtfd)
+					break;
+
+				evt = eventfd_ctx_fdget(fd);
+				if (IS_ERR(evt)) {
+					ret = PTR_ERR(evt);
+					break;
+				}
+				mdev_state->msi_evtfd = evt;
+				mdev_state->irq_fd = fd;
+				mdev_state->irq_index = index;
+			}
+			break;
+	}
+	break;
+	case VFIO_PCI_MSIX_IRQ_INDEX:
+		pr_info("%s: MSIX_IRQ\n", __func__);
+		break;
+	case VFIO_PCI_ERR_IRQ_INDEX:
+		pr_info("%s: ERR_IRQ\n", __func__);
+		break;
+	case VFIO_PCI_REQ_IRQ_INDEX:
+		pr_info("%s: REQ_IRQ\n", __func__);
+		break;
+	}
+
+	mutex_unlock(&mdev_state->ops_lock);
+	return ret;
+}
+
+static int mtty_trigger_interrupt(uuid_le uuid)
+{
+	int ret = -1;
+	struct mdev_state *mdev_state;
+
+	mdev_state = find_mdev_state_by_uuid(uuid);
+
+	if (!mdev_state) {
+		pr_info("%s: mdev not found\n", __func__);
+		return -EINVAL;
+	}
+
+	if ((mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) &&
+	    (!mdev_state->msi_evtfd))
+		return -EINVAL;
+	else if ((mdev_state->irq_index == VFIO_PCI_INTX_IRQ_INDEX) &&
+		 (!mdev_state->intx_evtfd)) {
+		pr_info("%s: Intr eventfd not found\n", __func__);
+		return -EINVAL;
+	}
+
+	if (mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX)
+		ret = eventfd_signal(mdev_state->msi_evtfd, 1);
+	else
+		ret = eventfd_signal(mdev_state->intx_evtfd, 1);
+
+#if defined(DEBUG_INTR)
+	pr_info("Intx triggered\n");
+#endif
+	if (ret != 1)
+		pr_err("%s: eventfd signal failed (%d)\n", __func__, ret);
+
+	return ret;
+}
+
+int mtty_get_region_info(struct mdev_device *mdev,
+			 struct vfio_region_info *region_info,
+			 u16 *cap_type_id, void **cap_type)
+{
+	unsigned int size = 0;
+	struct mdev_state *mdev_state;
+	int bar_index;
+
+	if (!mdev)
+		return -EINVAL;
+
+	mdev_state = mdev_get_drvdata(mdev);
+	if (!mdev_state)
+		return -EINVAL;
+
+	mutex_lock(&mdev_state->ops_lock);
+	bar_index = region_info->index;
+
+	switch (bar_index) {
+	case VFIO_PCI_CONFIG_REGION_INDEX:
+		size = MTTY_CONFIG_SPACE_SIZE;
+		break;
+	case VFIO_PCI_BAR0_REGION_INDEX:
+		size = MTTY_IO_BAR_SIZE;
+		break;
+	case VFIO_PCI_BAR1_REGION_INDEX:
+		if (mdev_state->nr_ports == 2)
+			size = MTTY_IO_BAR_SIZE;
+		break;
+	default:
+		size = 0;
+		break;
+	}
+
+	mdev_state->region_info[bar_index].size = size;
+	mdev_state->region_info[bar_index].vfio_offset =
+		MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index);
+
+	region_info->size = size;
+	region_info->offset = MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index);
+	region_info->flags = VFIO_REGION_INFO_FLAG_READ |
+		VFIO_REGION_INFO_FLAG_WRITE;
+	mutex_unlock(&mdev_state->ops_lock);
+	return 0;
+}
+
+int mtty_get_irq_info(struct mdev_device *mdev, struct vfio_irq_info *irq_info)
+{
+	switch (irq_info->index) {
+	case VFIO_PCI_INTX_IRQ_INDEX:
+	case VFIO_PCI_MSI_IRQ_INDEX:
+	case VFIO_PCI_REQ_IRQ_INDEX:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	irq_info->flags = VFIO_IRQ_INFO_EVENTFD;
+	irq_info->count = 1;
+
+	if (irq_info->index == VFIO_PCI_INTX_IRQ_INDEX)
+		irq_info->flags |= (VFIO_IRQ_INFO_MASKABLE |
+				VFIO_IRQ_INFO_AUTOMASKED);
+	else
+		irq_info->flags |= VFIO_IRQ_INFO_NORESIZE;
+
+	return 0;
+}
+
+int mtty_get_device_info(struct mdev_device *mdev,
+			 struct vfio_device_info *dev_info)
+{
+	dev_info->flags = VFIO_DEVICE_FLAGS_PCI;
+	dev_info->num_regions = VFIO_PCI_NUM_REGIONS;
+	dev_info->num_irqs = VFIO_PCI_NUM_IRQS;
+
+	return 0;
+}
+
+static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd,
+			unsigned long arg)
+{
+	int ret = 0;
+	unsigned long minsz;
+	struct mdev_state *mdev_state;
+
+	if (!mdev)
+		return -EINVAL;
+
+	mdev_state = mdev_get_drvdata(mdev);
+	if (!mdev_state)
+		return -ENODEV;
+
+	switch (cmd) {
+	case VFIO_DEVICE_GET_INFO:
+	{
+		struct vfio_device_info info;
+
+		minsz = offsetofend(struct vfio_device_info, num_irqs);
+
+		if (copy_from_user(&info, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		if (info.argsz < minsz)
+			return -EINVAL;
+
+		ret = mtty_get_device_info(mdev, &info);
+		if (ret)
+			return ret;
+
+		memcpy(&mdev_state->dev_info, &info, sizeof(info));
+
+		return copy_to_user((void __user *)arg, &info, minsz);
+	}
+	case VFIO_DEVICE_GET_REGION_INFO:
+	{
+		struct vfio_region_info info;
+		u16 cap_type_id = 0;
+		void *cap_type = NULL;
+
+		minsz = offsetofend(struct vfio_region_info, offset);
+
+		if (copy_from_user(&info, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		if (info.argsz < minsz)
+			return -EINVAL;
+
+		ret = mtty_get_region_info(mdev, &info, &cap_type_id,
+					   &cap_type);
+		if (ret)
+			return ret;
+
+		return copy_to_user((void __user *)arg, &info, minsz);
+	}
+
+	case VFIO_DEVICE_GET_IRQ_INFO:
+	{
+		struct vfio_irq_info info;
+
+		minsz = offsetofend(struct vfio_irq_info, count);
+
+		if (copy_from_user(&info, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		if ((info.argsz < minsz) ||
+		    (info.index >= mdev_state->dev_info.num_irqs))
+			return -EINVAL;
+
+		ret = mtty_get_irq_info(mdev, &info);
+		if (ret)
+			return ret;
+
+		if (info.count == -1)
+			return -EINVAL;
+
+		return copy_to_user((void __user *)arg, &info, minsz);
+	}
+	case VFIO_DEVICE_SET_IRQS:
+	{
+		struct vfio_irq_set hdr;
+		u8 *data = NULL, *ptr = NULL;
+		size_t data_size = 0;
+
+		minsz = offsetofend(struct vfio_irq_set, count);
+
+		if (copy_from_user(&hdr, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		ret = vfio_set_irqs_validate_and_prepare(&hdr,
+						mdev_state->dev_info.num_irqs,
+						VFIO_PCI_NUM_IRQS,
+						&data_size);
+		if (ret)
+			return ret;
+
+		if (data_size) {
+			ptr = data = memdup_user((void __user *)(arg + minsz),
+						 data_size);
+			if (IS_ERR(data))
+				return PTR_ERR(data);
+		}
+
+		ret = mtty_set_irqs(mdev, hdr.flags, hdr.index, hdr.start,
+				    hdr.count, data);
+
+		kfree(ptr);
+		return ret;
+	}
+	case VFIO_DEVICE_RESET:
+		return mtty_reset(mdev);
+	}
+	return -ENOTTY;
+}
+
+int mtty_open(struct mdev_device *mdev)
+{
+	pr_info("%s\n", __func__);
+	return 0;
+}
+
+void mtty_close(struct mdev_device *mdev)
+{
+	pr_info("%s\n", __func__);
+}
+
+static ssize_t
+sample_mtty_dev_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	return sprintf(buf, "This is phy device\n");
+}
+
+static DEVICE_ATTR_RO(sample_mtty_dev);
+
+static struct attribute *mtty_dev_attrs[] = {
+	&dev_attr_sample_mtty_dev.attr,
+	NULL,
+};
+
+static const struct attribute_group mtty_dev_group = {
+	.name  = "mtty_dev",
+	.attrs = mtty_dev_attrs,
+};
+
+const struct attribute_group *mtty_dev_groups[] = {
+	&mtty_dev_group,
+	NULL,
+};
+
+static ssize_t
+sample_mdev_dev_show(struct device *dev, struct device_attribute *attr,
+		     char *buf)
+{
+	struct mdev_device *mdev = to_mdev_device(dev);
+
+	if (mdev)
+		return sprintf(buf, "This is MDEV %s\n", dev_name(&mdev->dev));
+
+	return sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR_RO(sample_mdev_dev);
+
+static struct attribute *mdev_dev_attrs[] = {
+	&dev_attr_sample_mdev_dev.attr,
+	NULL,
+};
+
+static const struct attribute_group mdev_dev_group = {
+	.name  = "vendor",
+	.attrs = mdev_dev_attrs,
+};
+
+const struct attribute_group *mdev_dev_groups[] = {
+	&mdev_dev_group,
+	NULL,
+};
+
+static ssize_t
+name_show(struct kobject *kobj, struct device *dev, char *buf)
+{
+	char name[MTTY_STRING_LEN];
+	int i;
+	const char *name_str[2] = {"Single port serial", "Dual port serial"};
+
+	for (i = 0; i < 2; i++) {
+		snprintf(name, MTTY_STRING_LEN, "%s-%d",
+			 dev_driver_string(dev), i + 1);
+		if (!strcmp(kobj->name, name))
+			return sprintf(buf, "%s\n", name_str[i]);
+	}
+
+	return -EINVAL;
+}
+
+MDEV_TYPE_ATTR_RO(name);
+
+static ssize_t
+available_instances_show(struct kobject *kobj, struct device *dev, char *buf)
+{
+	char name[MTTY_STRING_LEN];
+	int i;
+	struct mdev_state *mds;
+	int ports = 0, used = 0;
+
+	for (i = 0; i < 2; i++) {
+		snprintf(name, MTTY_STRING_LEN, "%s-%d",
+			 dev_driver_string(dev), i + 1);
+		if (!strcmp(kobj->name, name)) {
+			ports = i + 1;
+			break;
+		}
+	}
+
+	if (!ports)
+		return -EINVAL;
+
+	list_for_each_entry(mds, &mdev_devices_list, next)
+		used += mds->nr_ports;
+
+	return sprintf(buf, "%d\n", (MAX_MTTYS - used)/ports);
+}
+
+MDEV_TYPE_ATTR_RO(available_instances);
+
+
+static ssize_t device_api_show(struct kobject *kobj, struct device *dev,
+			       char *buf)
+{
+	return sprintf(buf, "%s\n", VFIO_DEVICE_API_PCI_STRING);
+}
+
+MDEV_TYPE_ATTR_RO(device_api);
+
+static struct attribute *mdev_types_attrs[] = {
+	&mdev_type_attr_name.attr,
+	&mdev_type_attr_device_api.attr,
+	&mdev_type_attr_available_instances.attr,
+	NULL,
+};
+
+static struct attribute_group mdev_type_group1 = {
+	.name  = "1",
+	.attrs = mdev_types_attrs,
+};
+
+static struct attribute_group mdev_type_group2 = {
+	.name  = "2",
+	.attrs = mdev_types_attrs,
+};
+
+struct attribute_group *mdev_type_groups[] = {
+	&mdev_type_group1,
+	&mdev_type_group2,
+	NULL,
+};
+
+struct parent_ops mdev_fops = {
+	.owner                  = THIS_MODULE,
+	.dev_attr_groups        = mtty_dev_groups,
+	.mdev_attr_groups       = mdev_dev_groups,
+	.supported_type_groups  = mdev_type_groups,
+	.create                 = mtty_create,
+	.remove			= mtty_remove,
+	.open                   = mtty_open,
+	.release                = mtty_close,
+	.read                   = mtty_read,
+	.write                  = mtty_write,
+	.ioctl		        = mtty_ioctl,
+};
+
+static void mtty_device_release(struct device *dev)
+{
+	dev_dbg(dev, "mtty: released\n");
+}
+
+static int __init mtty_dev_init(void)
+{
+	int ret = 0;
+
+	pr_info("mtty_dev: %s\n", __func__);
+
+	memset(&mtty_dev, 0, sizeof(mtty_dev));
+
+	idr_init(&mtty_dev.vd_idr);
+
+	ret = alloc_chrdev_region(&mtty_dev.vd_devt, 0, MINORMASK, MTTY_NAME);
+
+	if (ret < 0) {
+		pr_err("Error: failed to register mtty_dev, err:%d\n", ret);
+		return ret;
+	}
+
+	cdev_init(&mtty_dev.vd_cdev, &vd_fops);
+	cdev_add(&mtty_dev.vd_cdev, mtty_dev.vd_devt, MINORMASK);
+
+	pr_info("major_number:%d\n", MAJOR(mtty_dev.vd_devt));
+
+	mtty_dev.vd_class = class_create(THIS_MODULE, MTTY_CLASS_NAME);
+
+	if (IS_ERR(mtty_dev.vd_class)) {
+		pr_err("Error: failed to register mtty_dev class\n");
+		goto failed1;
+	}
+
+	mtty_dev.dev.class = mtty_dev.vd_class;
+	mtty_dev.dev.release = mtty_device_release;
+	dev_set_name(&mtty_dev.dev, "%s", MTTY_NAME);
+
+	ret = device_register(&mtty_dev.dev);
+	if (ret)
+		goto failed2;
+
+	if (mdev_register_device(&mtty_dev.dev, &mdev_fops) != 0)
+		goto failed3;
+
+	mutex_init(&mdev_list_lock);
+	INIT_LIST_HEAD(&mdev_devices_list);
+
+	goto all_done;
+
+failed3:
+
+	device_unregister(&mtty_dev.dev);
+failed2:
+	class_destroy(mtty_dev.vd_class);
+
+failed1:
+	cdev_del(&mtty_dev.vd_cdev);
+	unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK);
+
+all_done:
+	return ret;
+}
+
+static void __exit mtty_dev_exit(void)
+{
+	mtty_dev.dev.bus = NULL;
+	mdev_unregister_device(&mtty_dev.dev);
+
+	device_unregister(&mtty_dev.dev);
+	idr_destroy(&mtty_dev.vd_idr);
+	cdev_del(&mtty_dev.vd_cdev);
+	unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK);
+	class_destroy(mtty_dev.vd_class);
+	mtty_dev.vd_class = NULL;
+	pr_info("mtty_dev: Unloaded!\n");
+}
+
+module_init(mtty_dev_init)
+module_exit(mtty_dev_exit)
+
+MODULE_LICENSE("GPL v2");
+MODULE_INFO(supported, "Test driver that simulate serial port over PCI");
+MODULE_VERSION(VERSION_STRING);
+MODULE_AUTHOR(DRIVER_AUTHOR);
-- 
2.7.0