* [PATCH v3 0/2] Broadcom FlexRM ring manager support
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: Jassi Brar, Rob Herring
Cc: Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR, Rob Rice,
devicetree, linux-kernel, linux-arm-kernel,
bcm-kernel-feedback-list, Anup Patel
The Broadcom FlexRM ring manager provides producer-consumer style
ring interface for offload engines on Broadcom iProc SoCs. We can
have one or more instances of Broadcom FlexRM ring manager in a SoC.
This patchset adds a mailbox driver for Broadcom FlexRM ring manager
which can be used by offload engine drivers as mailbox clients.
The Broadcom FlexRM mailbox driver is feature complete for RAID and
Crypto offload engines. We will have incremental patches in-future
for ring-level statistics using debugfs and minor optimizations.
This patchset is based on Linux-4.10-rc2 and it is also available
at flexrm-v3 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v2:
- Rebased patches for Linux-4.10-rc2
Changes since v1:
- Use compatile string as brcm,iproc-flexrm-mbox
- Rephrase commit message and text in DT bindings patch
Anup Patel (2):
mailbox: Add driver for Broadcom FlexRM ring manager
dt-bindings: Add DT bindings info for FlexRM ring manager
.../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-flexrm/Makefile | 6 +
drivers/mailbox/mailbox-flexrm/flexrm-desc.c | 764 +++++++++++++++++++
drivers/mailbox/mailbox-flexrm/flexrm-desc.h | 47 ++
drivers/mailbox/mailbox-flexrm/flexrm-main.c | 829 +++++++++++++++++++++
include/linux/mailbox/brcm-message.h | 14 +-
8 files changed, 1729 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
create mode 100644 drivers/mailbox/mailbox-flexrm/Makefile
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.c
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.h
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-main.c
--
2.7.4
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 0/2] Broadcom FlexRM ring manager support
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: linux-arm-kernel
The Broadcom FlexRM ring manager provides producer-consumer style
ring interface for offload engines on Broadcom iProc SoCs. We can
have one or more instances of Broadcom FlexRM ring manager in a SoC.
This patchset adds a mailbox driver for Broadcom FlexRM ring manager
which can be used by offload engine drivers as mailbox clients.
The Broadcom FlexRM mailbox driver is feature complete for RAID and
Crypto offload engines. We will have incremental patches in-future
for ring-level statistics using debugfs and minor optimizations.
This patchset is based on Linux-4.10-rc2 and it is also available
at flexrm-v3 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v2:
- Rebased patches for Linux-4.10-rc2
Changes since v1:
- Use compatile string as brcm,iproc-flexrm-mbox
- Rephrase commit message and text in DT bindings patch
Anup Patel (2):
mailbox: Add driver for Broadcom FlexRM ring manager
dt-bindings: Add DT bindings info for FlexRM ring manager
.../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-flexrm/Makefile | 6 +
drivers/mailbox/mailbox-flexrm/flexrm-desc.c | 764 +++++++++++++++++++
drivers/mailbox/mailbox-flexrm/flexrm-desc.h | 47 ++
drivers/mailbox/mailbox-flexrm/flexrm-main.c | 829 +++++++++++++++++++++
include/linux/mailbox/brcm-message.h | 14 +-
8 files changed, 1729 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
create mode 100644 drivers/mailbox/mailbox-flexrm/Makefile
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.c
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.h
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-main.c
--
2.7.4
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 1/2] mailbox: Add driver for Broadcom FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: Jassi Brar, Rob Herring
Cc: Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR, Rob Rice,
devicetree, linux-kernel, linux-arm-kernel,
bcm-kernel-feedback-list, Anup Patel
Some of the Broadcom iProc SoCs have FlexRM ring manager
which provides a ring-based programming interface to various
offload engines (e.g. RAID, Crypto, etc).
This patch adds a common mailbox driver for Broadcom FlexRM
ring manager which can be shared by various offload engine
drivers (implemented as mailbox clients).
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-flexrm/Makefile | 6 +
drivers/mailbox/mailbox-flexrm/flexrm-desc.c | 764 ++++++++++++++++++++++++
drivers/mailbox/mailbox-flexrm/flexrm-desc.h | 47 ++
drivers/mailbox/mailbox-flexrm/flexrm-main.c | 829 +++++++++++++++++++++++++++
include/linux/mailbox/brcm-message.h | 14 +-
7 files changed, 1669 insertions(+), 4 deletions(-)
create mode 100644 drivers/mailbox/mailbox-flexrm/Makefile
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.c
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.h
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-main.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ceff415..305018c 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -152,4 +152,15 @@ config BCM_PDC_MBOX
Mailbox implementation for the Broadcom PDC ring manager,
which provides access to various offload engines on Broadcom
SoCs. Say Y here if you want to use the Broadcom PDC.
+
+config BCM_FLEXRM_MBOX
+ tristate "Broadcom FlexRM Mailbox"
+ depends on ARM64 || COMPILE_TEST
+ depends on HAS_DMA
+ select GENERIC_MSI_IRQ_DOMAIN
+ default ARCH_BCM_IPROC
+ help
+ Mailbox implementation of the Broadcom FlexRM ring manager,
+ which provides access to various offload engines on Broadcom
+ SoCs. Say Y here if you want to use the Broadcom FlexRM.
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 7dde4f6..45083c0 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -30,4 +30,6 @@ obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += mailbox-flexrm/
+
obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o
diff --git a/drivers/mailbox/mailbox-flexrm/Makefile b/drivers/mailbox/mailbox-flexrm/Makefile
new file mode 100644
index 0000000..f5bf069
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Broadcom FlexRM Mailbox Driver.
+#
+
+flexrm-mbox-objs := flexrm-main.o flexrm-desc.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += flexrm-mbox.o
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.c b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
new file mode 100644
index 0000000..b0449eb
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
@@ -0,0 +1,764 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#include <asm/barrier.h>
+#include <asm/byteorder.h>
+#include <linux/dma-mapping.h>
+#include <linux/printk.h>
+
+#include "flexrm-desc.h"
+
+/* Completion descriptor format */
+#define CMPL_OPAQUE_SHIFT 0
+#define CMPL_OPAQUE_MASK 0xffff
+#define CMPL_ENGINE_STATUS_SHIFT 16
+#define CMPL_ENGINE_STATUS_MASK 0xffff
+#define CMPL_DME_STATUS_SHIFT 32
+#define CMPL_DME_STATUS_MASK 0xffff
+#define CMPL_RM_STATUS_SHIFT 48
+#define CMPL_RM_STATUS_MASK 0xffff
+
+/* Completion DME status code */
+#define DME_STATUS_MEM_COR_ERR BIT(0)
+#define DME_STATUS_MEM_UCOR_ERR BIT(1)
+#define DME_STATUS_FIFO_UNDERFLOW BIT(2)
+#define DME_STATUS_FIFO_OVERFLOW BIT(3)
+#define DME_STATUS_RRESP_ERR BIT(4)
+#define DME_STATUS_BRESP_ERR BIT(5)
+#define DME_STATUS_ERROR_MASK (DME_STATUS_MEM_COR_ERR | \
+ DME_STATUS_MEM_UCOR_ERR | \
+ DME_STATUS_FIFO_UNDERFLOW | \
+ DME_STATUS_FIFO_OVERFLOW | \
+ DME_STATUS_RRESP_ERR | \
+ DME_STATUS_BRESP_ERR)
+
+/* Completion RM status code */
+#define RM_STATUS_CODE_SHIFT 0
+#define RM_STATUS_CODE_MASK 0x3ff
+#define RM_STATUS_CODE_GOOD 0x0
+#define RM_STATUS_CODE_AE_TIMEOUT 0x3ff
+
+/* General descriptor format */
+#define DESC_TYPE_SHIFT 60
+#define DESC_TYPE_MASK 0xf
+#define DESC_PAYLOAD_SHIFT 0
+#define DESC_PAYLOAD_MASK 0x0fffffffffffffff
+
+/* Null descriptor format */
+#define NULL_TYPE 0
+#define NULL_TOGGLE_SHIFT 58
+#define NULL_TOGGLE_MASK 0x1
+
+/* Header descriptor format */
+#define HEADER_TYPE 1
+#define HEADER_TOGGLE_SHIFT 58
+#define HEADER_TOGGLE_MASK 0x1
+#define HEADER_ENDPKT_SHIFT 57
+#define HEADER_ENDPKT_MASK 0x1
+#define HEADER_STARTPKT_SHIFT 56
+#define HEADER_STARTPKT_MASK 0x1
+#define HEADER_BDCOUNT_SHIFT 36
+#define HEADER_BDCOUNT_MASK 0x1f
+#define HEADER_BDCOUNT_MAX HEADER_BDCOUNT_MASK
+#define HEADER_FLAGS_SHIFT 16
+#define HEADER_FLAGS_MASK 0xffff
+#define HEADER_OPAQUE_SHIFT 0
+#define HEADER_OPAQUE_MASK 0xffff
+
+/* Source (SRC) descriptor format */
+#define SRC_TYPE 2
+#define SRC_LENGTH_SHIFT 44
+#define SRC_LENGTH_MASK 0xffff
+#define SRC_ADDR_SHIFT 0
+#define SRC_ADDR_MASK 0x00000fffffffffff
+
+/* Destination (DST) descriptor format */
+#define DST_TYPE 3
+#define DST_LENGTH_SHIFT 44
+#define DST_LENGTH_MASK 0xffff
+#define DST_ADDR_SHIFT 0
+#define DST_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate (IMM) descriptor format */
+#define IMM_TYPE 4
+#define IMM_DATA_SHIFT 0
+#define IMM_DATA_MASK 0x0fffffffffffffff
+
+/* Next pointer (NPTR) descriptor format */
+#define NPTR_TYPE 5
+#define NPTR_TOGGLE_SHIFT 58
+#define NPTR_TOGGLE_MASK 0x1
+#define NPTR_ADDR_SHIFT 0
+#define NPTR_ADDR_MASK 0x00000fffffffffff
+
+/* Mega source (MSRC) descriptor format */
+#define MSRC_TYPE 6
+#define MSRC_LENGTH_SHIFT 44
+#define MSRC_LENGTH_MASK 0xffff
+#define MSRC_ADDR_SHIFT 0
+#define MSRC_ADDR_MASK 0x00000fffffffffff
+
+/* Mega destination (MDST) descriptor format */
+#define MDST_TYPE 7
+#define MDST_LENGTH_SHIFT 44
+#define MDST_LENGTH_MASK 0xffff
+#define MDST_ADDR_SHIFT 0
+#define MDST_ADDR_MASK 0x00000fffffffffff
+
+/* Source with tlast (SRCT) descriptor format */
+#define SRCT_TYPE 8
+#define SRCT_LENGTH_SHIFT 44
+#define SRCT_LENGTH_MASK 0xffff
+#define SRCT_ADDR_SHIFT 0
+#define SRCT_ADDR_MASK 0x00000fffffffffff
+
+/* Destination with tlast (DSTT) descriptor format */
+#define DSTT_TYPE 9
+#define DSTT_LENGTH_SHIFT 44
+#define DSTT_LENGTH_MASK 0xffff
+#define DSTT_ADDR_SHIFT 0
+#define DSTT_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate with tlast (IMMT) descriptor format */
+#define IMMT_TYPE 10
+#define IMMT_DATA_SHIFT 0
+#define IMMT_DATA_MASK 0x0fffffffffffffff
+
+/* Descriptor helper macros */
+#define DESC_DEC(_d, _s, _m) (((_d) >> (_s)) & (_m))
+#define DESC_ENC(_d, _v, _s, _m) \
+ do { \
+ (_d) &= ~((u64)(_m) << (_s)); \
+ (_d) |= (((u64)(_v) & (_m)) << (_s)); \
+ } while (0)
+
+u64 flexrm_read_desc(void *desc_ptr)
+{
+ return le64_to_cpu(*((u64 *)desc_ptr));
+}
+
+void flexrm_write_desc(void *desc_ptr, u64 desc)
+{
+ *((u64 *)desc_ptr) = cpu_to_le64(desc);
+}
+
+u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc)
+{
+ return (u32)(cmpl_desc & CMPL_OPAQUE_MASK);
+}
+
+int flexrm_cmpl_desc_to_error(u64 cmpl_desc)
+{
+ u32 status;
+
+ status = DESC_DEC(cmpl_desc, CMPL_DME_STATUS_SHIFT,
+ CMPL_DME_STATUS_MASK);
+ if (status & DME_STATUS_ERROR_MASK)
+ return -EIO;
+
+ status = DESC_DEC(cmpl_desc, CMPL_RM_STATUS_SHIFT,
+ CMPL_RM_STATUS_MASK);
+ status &= RM_STATUS_CODE_MASK;
+ if (status == RM_STATUS_CODE_AE_TIMEOUT)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+bool flexrm_is_next_table_desc(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+ u32 type = DESC_DEC(desc, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+
+ return (type == NPTR_TYPE) ? true : false;
+}
+
+u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NPTR_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NPTR_TOGGLE_SHIFT, NPTR_TOGGLE_MASK);
+ DESC_ENC(desc, next_addr, NPTR_ADDR_SHIFT, NPTR_ADDR_MASK);
+
+ return desc;
+}
+
+u64 flexrm_null_desc(u32 toggle)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NULL_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NULL_TOGGLE_SHIFT, NULL_TOGGLE_MASK);
+
+ return desc;
+}
+
+u32 flexrm_estimate_header_desc_count(u32 nhcnt)
+{
+ u32 hcnt = nhcnt / HEADER_BDCOUNT_MAX;
+
+ if (!(nhcnt % HEADER_BDCOUNT_MAX))
+ hcnt += 1;
+
+ return hcnt;
+}
+
+static void flexrm_flip_header_toogle(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+
+ if (desc & ((u64)0x1 << HEADER_TOGGLE_SHIFT))
+ desc &= ~((u64)0x1 << HEADER_TOGGLE_SHIFT);
+ else
+ desc |= ((u64)0x1 << HEADER_TOGGLE_SHIFT);
+
+ flexrm_write_desc(desc_ptr, desc);
+}
+
+static u64 flexrm_header_desc(u32 toggle, u32 startpkt, u32 endpkt,
+ u32 bdcount, u32 flags, u32 opaque)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, HEADER_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, HEADER_TOGGLE_SHIFT, HEADER_TOGGLE_MASK);
+ DESC_ENC(desc, startpkt, HEADER_STARTPKT_SHIFT, HEADER_STARTPKT_MASK);
+ DESC_ENC(desc, endpkt, HEADER_ENDPKT_SHIFT, HEADER_ENDPKT_MASK);
+ DESC_ENC(desc, bdcount, HEADER_BDCOUNT_SHIFT, HEADER_BDCOUNT_MASK);
+ DESC_ENC(desc, flags, HEADER_FLAGS_SHIFT, HEADER_FLAGS_MASK);
+ DESC_ENC(desc, opaque, HEADER_OPAQUE_SHIFT, HEADER_OPAQUE_MASK);
+
+ return desc;
+}
+
+static void flexrm_enqueue_desc(u32 nhpos, u32 nhcnt, u32 reqid,
+ u64 desc, void **desc_ptr, u32 *toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhavail, _toggle, _startpkt, _endpkt, _bdcount;
+
+ /* Sanity check */
+ if (nhcnt <= nhpos)
+ return;
+
+ /*
+ * Each request or packet start with a HEADER descriptor followed
+ * by one or more non-HEADER descriptors (SRC, SRCT, MSRC, DST,
+ * DSTT, MDST, IMM, and IMMT). The number of non-HEADER descriptors
+ * following a HEADER descriptor is represented by BDCOUNT field
+ * of HEADER descriptor. The max value of BDCOUNT field is 31 which
+ * means we can only have 31 non-HEADER descriptors following one
+ * HEADER descriptor.
+ *
+ * In general use, number of non-HEADER descriptors can easily go
+ * beyond 31. To tackle this situation, we have packet (or request)
+ * extenstion bits (STARTPKT and ENDPKT) in the HEADER descriptor.
+ *
+ * To use packet extension, the first HEADER descriptor of request
+ * (or packet) will have STARTPKT=1 and ENDPKT=0. The intermediate
+ * HEADER descriptors will have STARTPKT=0 and ENDPKT=0. The last
+ * HEADER descriptor will have STARTPKT=0 and ENDPKT=1. Also, the
+ * TOGGLE bit of the first HEADER will be set to invalid state to
+ * ensure that FlexRM does not start fetching descriptors till all
+ * descriptors are enqueued. The user of this function will flip
+ * the TOGGLE bit of first HEADER after all descriptors are
+ * enqueued.
+ */
+
+ if ((nhpos % HEADER_BDCOUNT_MAX == 0) && (nhcnt - nhpos)) {
+ /* Prepare the header descriptor */
+ nhavail = (nhcnt - nhpos);
+ _toggle = (nhpos == 0) ? !(*toggle) : (*toggle);
+ _startpkt = (nhpos == 0) ? 0x1 : 0x0;
+ _endpkt = (nhavail <= HEADER_BDCOUNT_MAX) ? 0x1 : 0x0;
+ _bdcount = (nhavail <= HEADER_BDCOUNT_MAX) ?
+ nhavail : HEADER_BDCOUNT_MAX;
+ if (nhavail <= HEADER_BDCOUNT_MAX)
+ _bdcount = nhavail;
+ else
+ _bdcount = HEADER_BDCOUNT_MAX;
+ d = flexrm_header_desc(_toggle, _startpkt, _endpkt,
+ _bdcount, 0x0, reqid);
+
+ /* Write header descriptor */
+ flexrm_write_desc(*desc_ptr, d);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+ }
+
+ /* Write desired descriptor */
+ flexrm_write_desc(*desc_ptr, desc);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+}
+
+static u64 flexrm_src_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRC_LENGTH_SHIFT, SRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRC_ADDR_SHIFT, SRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_msrc_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MSRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MSRC_LENGTH_SHIFT, MSRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, MSRC_ADDR_SHIFT, MSRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dst_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DST_LENGTH_SHIFT, DST_LENGTH_MASK);
+ DESC_ENC(desc, addr, DST_ADDR_SHIFT, DST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_mdst_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MDST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MDST_LENGTH_SHIFT, MDST_LENGTH_MASK);
+ DESC_ENC(desc, addr, MDST_ADDR_SHIFT, MDST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_imm_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMM_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMM_DATA_SHIFT, IMM_DATA_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_srct_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRCT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRCT_LENGTH_SHIFT, SRCT_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRCT_ADDR_SHIFT, SRCT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dstt_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DSTT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DSTT_LENGTH_SHIFT, DSTT_LENGTH_MASK);
+ DESC_ENC(desc, addr, DSTT_ADDR_SHIFT, DSTT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_immt_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMMT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMMT_DATA_SHIFT, IMMT_DATA_MASK);
+
+ return desc;
+}
+
+static bool flexrm_spu_sanity_check(struct brcm_message *msg)
+{
+ struct scatterlist *sg;
+
+ if (!msg->spu.src || !msg->spu.dst)
+ return false;
+ for (sg = msg->spu.src; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > SRC_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MSRC_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+ for (sg = msg->spu.dst; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > DST_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MDST_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static u32 flexrm_spu_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 cnt = 0;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ cnt++;
+ dst_target = src_sg->length;
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ cnt++;
+ if (dst_sg->length < dst_target)
+ dst_target -= dst_sg->length;
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ return cnt;
+}
+
+static int flexrm_spu_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ int rc;
+
+ rc = dma_map_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ if (rc < 0)
+ return rc;
+
+ rc = dma_map_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ if (rc < 0) {
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void flexrm_spu_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ dma_unmap_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+}
+
+static void *flexrm_spu_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhpos = 0;
+ void *orig_desc_ptr = desc_ptr;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ if (sg_dma_len(src_sg) & 0xf)
+ d = flexrm_src_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg));
+ else
+ d = flexrm_msrc_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ dst_target = sg_dma_len(src_sg);
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ if (sg_dma_len(dst_sg) & 0xf)
+ d = flexrm_dst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg));
+ else
+ d = flexrm_mdst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ if (sg_dma_len(dst_sg) < dst_target)
+ dst_target -= sg_dma_len(dst_sg);
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+static bool flexrm_sba_sanity_check(struct brcm_message *msg)
+{
+ u32 i;
+
+ if (!msg->sba.cmds || !msg->sba.cmds_count)
+ return false;
+
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ if (((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C)) &&
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (msg->sba.cmds[i].resp_len > DSTT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT) &&
+ (msg->sba.cmds[i].data_len > DSTT_LENGTH_MASK))
+ return false;
+ }
+
+ return true;
+}
+
+static u32 flexrm_sba_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 i, cnt;
+
+ cnt = 0;
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ cnt++;
+
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C))
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP)
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT)
+ cnt++;
+ }
+
+ return cnt;
+}
+
+static void *flexrm_sba_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 i, nhpos = 0;
+ struct brcm_sba_command *c;
+ void *orig_desc_ptr = desc_ptr;
+
+ /* Convert SBA commands into descriptors */
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ c = &msg->sba.cmds[i];
+
+ if ((c->flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (c->flags & BRCM_SBA_CMD_HAS_OUTPUT)) {
+ /* Destination response descriptor */
+ d = flexrm_dst_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else if (c->flags & BRCM_SBA_CMD_HAS_RESP) {
+ /* Destination response with tlast descriptor */
+ d = flexrm_dstt_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_HAS_OUTPUT) {
+ /* Destination with tlast descriptor */
+ d = flexrm_dstt_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_TYPE_B) {
+ /* Command as immediate descriptor */
+ d = flexrm_imm_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else {
+ /* Command as immediate descriptor with tlast */
+ d = flexrm_immt_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if ((c->flags & BRCM_SBA_CMD_TYPE_B) ||
+ (c->flags & BRCM_SBA_CMD_TYPE_C)) {
+ /* Source with tlast descriptor */
+ d = flexrm_srct_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+bool flexrm_sanity_check(struct brcm_message *msg)
+{
+ if (!msg)
+ return false;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_sanity_check(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_sanity_check(msg);
+ default:
+ return false;
+ };
+}
+
+u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ if (!msg)
+ return 0;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_estimate_nonheader_desc_count(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_estimate_nonheader_desc_count(msg);
+ default:
+ return 0;
+ };
+}
+
+int flexrm_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return -EINVAL;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_dma_map(dev, msg);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ flexrm_spu_dma_unmap(dev, msg);
+ break;
+ default:
+ break;
+ }
+}
+
+void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ if (!msg || !desc_ptr || !start_desc || !end_desc)
+ return ERR_PTR(-ENOTSUPP);
+
+ if ((desc_ptr < start_desc) || (end_desc <= desc_ptr))
+ return ERR_PTR(-ERANGE);
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ default:
+ return ERR_PTR(-ENOTSUPP);
+ };
+}
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.h b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
new file mode 100644
index 0000000..a95cf61
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
@@ -0,0 +1,47 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#ifndef __FLEXRM_DESC_H__
+#define __FLEXRM_DESC_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mailbox/brcm-message.h>
+
+extern u64 flexrm_read_desc(void *desc_ptr);
+
+extern void flexrm_write_desc(void *desc_ptr, u64 desc);
+
+extern u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc);
+
+extern int flexrm_cmpl_desc_to_error(u64 cmpl_desc);
+
+extern bool flexrm_is_next_table_desc(void *desc_ptr);
+
+extern u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr);
+
+extern u64 flexrm_null_desc(u32 toogle);
+
+extern u32 flexrm_estimate_header_desc_count(u32 nhcnt);
+
+extern bool flexrm_sanity_check(struct brcm_message *msg);
+
+extern u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg);
+
+extern int flexrm_dma_map(struct device *dev, struct brcm_message *msg);
+
+extern void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg);
+
+extern void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc);
+
+#endif /* __FLEXRM_DESC_H__ */
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-main.c b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
new file mode 100644
index 0000000..c8890f1
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
@@ -0,0 +1,829 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Each Broadcom FlexSparx4 offload engine is implemented as an
+ * extension to Broadcom FlexRM ring manager. The FlexRM ring
+ * manager provides a set of rings which can be used to submit
+ * work to a FlexSparx4 offload engine.
+ *
+ * This driver creates a mailbox controller using a set of FlexRM
+ * rings where each mailbox channel represents a separate FlexRM ring.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/brcm-message.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "flexrm-desc.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE 0x10000
+#define RING_DESC_SIZE 8
+#define RING_DESC_INDEX(offset) \
+ ((offset) / RING_DESC_SIZE)
+#define RING_DESC_OFFSET(index) \
+ ((index) * RING_DESC_SIZE)
+#define RING_MAX_REQ_COUNT 1024
+#define RING_BD_ALIGN_ORDER 12
+#define RING_BD_ALIGN_CHECK(addr) \
+ (!((addr) & ((0x1 << RING_BD_ALIGN_ORDER) - 1)))
+#define RING_BD_TOGGLE_INVALID(offset) \
+ (((offset) >> RING_BD_ALIGN_ORDER) & 0x1)
+#define RING_BD_TOGGLE_VALID(offset) \
+ (!RING_BD_TOGGLE_INVALID(offset))
+#define RING_BD_DESC_PER_REQ 32
+#define RING_BD_DESC_COUNT \
+ (RING_MAX_REQ_COUNT * RING_BD_DESC_PER_REQ)
+#define RING_BD_SIZE \
+ (RING_BD_DESC_COUNT * RING_DESC_SIZE)
+#define RING_CMPL_ALIGN_ORDER 13
+#define RING_CMPL_DESC_COUNT RING_MAX_REQ_COUNT
+#define RING_CMPL_SIZE \
+ (RING_CMPL_DESC_COUNT * RING_DESC_SIZE)
+#define RING_VER_MAGIC 0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER 0x000
+#define RING_BD_START_ADDR 0x004
+#define RING_BD_READ_PTR 0x008
+#define RING_BD_WRITE_PTR 0x00c
+#define RING_BD_READ_PTR_DDR_LS 0x010
+#define RING_BD_READ_PTR_DDR_MS 0x014
+#define RING_CMPL_START_ADDR 0x018
+#define RING_CMPL_WRITE_PTR 0x01c
+#define RING_NUM_REQ_RECV_LS 0x020
+#define RING_NUM_REQ_RECV_MS 0x024
+#define RING_NUM_REQ_TRANS_LS 0x028
+#define RING_NUM_REQ_TRANS_MS 0x02c
+#define RING_NUM_REQ_OUTSTAND 0x030
+#define RING_CONTROL 0x034
+#define RING_FLUSH_DONE 0x038
+#define RING_MSI_ADDR_LS 0x03c
+#define RING_MSI_ADDR_MS 0x040
+#define RING_MSI_CONTROL 0x048
+#define RING_BD_READ_PTR_DDR_CONTROL 0x04c
+#define RING_MSI_DATA_VALUE 0x064
+
+/* Register RING_BD_START_ADDR fields */
+#define BD_LAST_UPDATE_HW_SHIFT 28
+#define BD_LAST_UPDATE_HW_MASK 0x1
+#define BD_START_ADDR_VALUE(pa) \
+ ((u32)((((dma_addr_t)(pa)) >> RING_BD_ALIGN_ORDER) & 0x0fffffff))
+#define BD_START_ADDR_DECODE(val) \
+ ((dma_addr_t)((val) & 0x0fffffff) << RING_BD_ALIGN_ORDER)
+
+/* Register RING_CMPL_START_ADDR fields */
+#define CMPL_START_ADDR_VALUE(pa) \
+ ((u32)((((u64)(pa)) >> RING_CMPL_ALIGN_ORDER) & 0x03ffffff))
+
+/* Register RING_CONTROL fields */
+#define CONTROL_MASK_DISABLE_CONTROL 12
+#define CONTROL_FLUSH_SHIFT 5
+#define CONTROL_ACTIVE_SHIFT 4
+#define CONTROL_RATE_ADAPT_MASK 0xf
+#define CONTROL_RATE_DYNAMIC 0x0
+#define CONTROL_RATE_FAST 0x8
+#define CONTROL_RATE_MEDIUM 0x9
+#define CONTROL_RATE_SLOW 0xa
+#define CONTROL_RATE_IDLE 0xb
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK 0x1
+
+/* Register RING_MSI_CONTROL fields */
+#define MSI_TIMER_VAL_SHIFT 16
+#define MSI_TIMER_VAL_MASK 0xffff
+#define MSI_ENABLE_SHIFT 15
+#define MSI_ENABLE_MASK 0x1
+#define MSI_COUNT_SHIFT 0
+#define MSI_COUNT_MASK 0x3ff
+
+/* Register RING_BD_READ_PTR_DDR_CONTROL fields */
+#define BD_READ_PTR_DDR_TIMER_VAL_SHIFT 16
+#define BD_READ_PTR_DDR_TIMER_VAL_MASK 0xffff
+#define BD_READ_PTR_DDR_ENABLE_SHIFT 15
+#define BD_READ_PTR_DDR_ENABLE_MASK 0x1
+
+struct flexrm_ring {
+ /* Unprotected members */
+ int num;
+ struct flexrm_mbox *mbox;
+ void __iomem *regs;
+ bool irq_requested;
+ unsigned int irq;
+ unsigned int msi_timer_val;
+ unsigned int msi_count_threshold;
+ struct ida requests_ida;
+ struct brcm_message *requests[RING_MAX_REQ_COUNT];
+ void *bd_base;
+ dma_addr_t bd_dma_base;
+ u32 bd_write_offset;
+ void *cmpl_base;
+ dma_addr_t cmpl_dma_base;
+ /* Protected members */
+ spinlock_t lock;
+ struct brcm_message *last_pending_msg;
+ u32 cmpl_read_offset;
+};
+
+struct flexrm_mbox {
+ struct device *dev;
+ void __iomem *regs;
+ u32 num_rings;
+ struct flexrm_ring *rings;
+ u64 dma_mask;
+ struct dma_pool *bd_pool;
+ struct dma_pool *cmpl_pool;
+ struct mbox_controller controller;
+};
+
+static int flexrm_new_request(struct flexrm_ring *ring,
+ struct brcm_message *batch_msg,
+ struct brcm_message *msg)
+{
+ void *next;
+ unsigned long flags;
+ u32 val, count, nhcnt;
+ u32 read_offset, write_offset;
+ bool exit_cleanup = false;
+ int ret = 0, reqid;
+
+ /* Do sanity check on message */
+ if (!flexrm_sanity_check(msg))
+ return -EIO;
+ msg->error = 0;
+
+ /* If no requests possible then save data pointer and goto done. */
+ reqid = ida_simple_get(&ring->requests_ida, 0,
+ RING_MAX_REQ_COUNT, GFP_KERNEL);
+ if (reqid < 0) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ return 0;
+ }
+ ring->requests[reqid] = msg;
+
+ /* Do DMA mappings for the message */
+ ret = flexrm_dma_map(ring->mbox->dev, msg);
+ if (ret < 0) {
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ return ret;
+ }
+
+ /* If last_pending_msg is already set then goto done with error */
+ spin_lock_irqsave(&ring->lock, flags);
+ if (ring->last_pending_msg)
+ ret = -ENOSPC;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ if (ret < 0) {
+ dev_warn(ring->mbox->dev, "no space in ring %d\n", ring->num);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Determine current HW BD read offset */
+ read_offset = readl_relaxed(ring->regs + RING_BD_READ_PTR);
+ val = readl_relaxed(ring->regs + RING_BD_START_ADDR);
+ read_offset *= RING_DESC_SIZE;
+ read_offset += (u32)(BD_START_ADDR_DECODE(val) - ring->bd_dma_base);
+
+ /*
+ * Number required descriptors = number of non-header descriptors +
+ * number of header descriptors +
+ * 1x null descriptor
+ */
+ nhcnt = flexrm_estimate_nonheader_desc_count(msg);
+ count = flexrm_estimate_header_desc_count(nhcnt) + nhcnt + 1;
+
+ /* Check for available descriptor space. */
+ write_offset = ring->bd_write_offset;
+ while (count) {
+ if (!flexrm_is_next_table_desc(ring->bd_base + write_offset))
+ count--;
+ write_offset += RING_DESC_SIZE;
+ if (write_offset == RING_BD_SIZE)
+ write_offset = 0x0;
+ if (write_offset == read_offset)
+ break;
+ }
+ if (count) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ ret = 0;
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Write descriptors to ring */
+ next = flexrm_write_descs(msg, nhcnt, reqid,
+ ring->bd_base + ring->bd_write_offset,
+ RING_BD_TOGGLE_VALID(ring->bd_write_offset),
+ ring->bd_base, ring->bd_base + RING_BD_SIZE);
+ if (IS_ERR(next)) {
+ ret = PTR_ERR(next);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Save ring BD write offset */
+ ring->bd_write_offset = (unsigned long)(next - ring->bd_base);
+
+exit:
+ /* Update error status in message */
+ msg->error = ret;
+
+ /* Cleanup if we failed */
+ if (exit_cleanup) {
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ }
+
+ return ret;
+}
+
+static int flexrm_process_completions(struct flexrm_ring *ring)
+{
+ u64 desc;
+ int err, count = 0;
+ unsigned long flags;
+ struct brcm_message *msg = NULL;
+ u32 reqid, cmpl_read_offset, cmpl_write_offset;
+ struct mbox_chan *chan = &ring->mbox->controller.chans[ring->num];
+
+ spin_lock_irqsave(&ring->lock, flags);
+
+ /* Check last_pending_msg */
+ if (ring->last_pending_msg) {
+ msg = ring->last_pending_msg;
+ ring->last_pending_msg = NULL;
+ }
+
+ /*
+ * Get current completion read and write offset
+ *
+ * Note: We should read completion write pointer atleast once
+ * after we get a MSI interrupt because HW maintains internal
+ * MSI status which will allow next MSI interrupt only after
+ * completion write pointer is read.
+ */
+ cmpl_write_offset = readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ cmpl_write_offset *= RING_DESC_SIZE;
+ cmpl_read_offset = ring->cmpl_read_offset;
+ ring->cmpl_read_offset = cmpl_write_offset;
+
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ /* If last_pending_msg was set then queue it back */
+ if (msg)
+ mbox_send_message(chan, msg);
+
+ /* For each completed request notify mailbox clients */
+ reqid = 0;
+ while (cmpl_read_offset != cmpl_write_offset) {
+ /* Dequeue next completion descriptor */
+ desc = *((u64 *)(ring->cmpl_base + cmpl_read_offset));
+
+ /* Next read offset */
+ cmpl_read_offset += RING_DESC_SIZE;
+ if (cmpl_read_offset == RING_CMPL_SIZE)
+ cmpl_read_offset = 0;
+
+ /* Decode error from completion descriptor */
+ err = flexrm_cmpl_desc_to_error(desc);
+ if (err < 0) {
+ dev_warn(ring->mbox->dev,
+ "got completion desc=0x%lx with error %d",
+ (unsigned long)desc, err);
+ }
+
+ /* Determine request id from completion descriptor */
+ reqid = flexrm_cmpl_desc_to_reqid(desc);
+
+ /* Determine message pointer based on reqid */
+ msg = ring->requests[reqid];
+ if (!msg) {
+ dev_warn(ring->mbox->dev,
+ "null msg pointer for completion desc=0x%lx",
+ (unsigned long)desc);
+ continue;
+ }
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = err;
+ mbox_chan_received_data(chan, msg);
+
+ /* Increment number of completions processed */
+ count++;
+ }
+
+ return count;
+}
+
+static irqreturn_t flexrm_irq_event(int irq, void *dev_id)
+{
+ /* We only have MSI for completions so just wakeup IRQ thread */
+ /* Ring related errors will be informed via completion descriptors */
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t flexrm_irq_thread(int irq, void *dev_id)
+{
+ flexrm_process_completions(dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int flexrm_send_data(struct mbox_chan *chan, void *data)
+{
+ int i, rc;
+ struct flexrm_ring *ring = chan->con_priv;
+ struct brcm_message *msg = data;
+
+ if (msg->type == BRCM_MESSAGE_BATCH) {
+ for (i = msg->batch.msgs_queued;
+ i < msg->batch.msgs_count; i++) {
+ rc = flexrm_new_request(ring, msg,
+ &msg->batch.msgs[i]);
+ if (rc) {
+ msg->error = rc;
+ return rc;
+ }
+ msg->batch.msgs_queued++;
+ }
+ return 0;
+ }
+
+ return flexrm_new_request(ring, NULL, data);
+}
+
+static bool flexrm_peek_data(struct mbox_chan *chan)
+{
+ int cnt = flexrm_process_completions(chan->con_priv);
+
+ return (cnt > 0) ? true : false;
+}
+
+static int flexrm_startup(struct mbox_chan *chan)
+{
+ u64 d;
+ u32 val, off;
+ int ret = 0;
+ dma_addr_t next_addr;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Allocate BD memory */
+ ring->bd_base = dma_pool_alloc(ring->mbox->bd_pool,
+ GFP_KERNEL, &ring->bd_dma_base);
+ if (!ring->bd_base) {
+ dev_err(ring->mbox->dev, "can't allocate BD memory\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Configure next table pointer entries in BD memory */
+ for (off = 0; off < RING_BD_SIZE; off += RING_DESC_SIZE) {
+ next_addr = off + RING_DESC_SIZE;
+ if (next_addr == RING_BD_SIZE)
+ next_addr = 0;
+ next_addr += ring->bd_dma_base;
+ if (RING_BD_ALIGN_CHECK(next_addr))
+ d = flexrm_next_table_desc(RING_BD_TOGGLE_VALID(off),
+ next_addr);
+ else
+ d = flexrm_null_desc(RING_BD_TOGGLE_INVALID(off));
+ flexrm_write_desc(ring->bd_base + off, d);
+ }
+
+ /* Allocate completion memory */
+ ring->cmpl_base = dma_pool_alloc(ring->mbox->cmpl_pool,
+ GFP_KERNEL, &ring->cmpl_dma_base);
+ if (!ring->cmpl_base) {
+ dev_err(ring->mbox->dev, "can't allocate completion memory\n");
+ ret = -ENOMEM;
+ goto fail_free_bd_memory;
+ }
+ memset(ring->cmpl_base, 0, RING_CMPL_SIZE);
+
+ /* Request IRQ */
+ if (ring->irq == UINT_MAX) {
+ dev_err(ring->mbox->dev, "ring IRQ not available\n");
+ ret = -ENODEV;
+ goto fail_free_cmpl_memory;
+ }
+ ret = request_threaded_irq(ring->irq,
+ flexrm_irq_event,
+ flexrm_irq_thread,
+ 0, dev_name(ring->mbox->dev), ring);
+ if (ret) {
+ dev_err(ring->mbox->dev, "failed to request ring IRQ\n");
+ goto fail_free_cmpl_memory;
+ }
+ ring->irq_requested = true;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Program BD start address */
+ val = BD_START_ADDR_VALUE(ring->bd_dma_base);
+ writel_relaxed(val, ring->regs + RING_BD_START_ADDR);
+
+ /* BD write pointer will be same as HW write pointer */
+ ring->bd_write_offset =
+ readl_relaxed(ring->regs + RING_BD_WRITE_PTR);
+ ring->bd_write_offset *= RING_DESC_SIZE;
+
+ /* Program completion start address */
+ val = CMPL_START_ADDR_VALUE(ring->cmpl_dma_base);
+ writel_relaxed(val, ring->regs + RING_CMPL_START_ADDR);
+
+ /* Ensure last pending message is cleared */
+ ring->last_pending_msg = NULL;
+
+ /* Completion read pointer will be same as HW write pointer */
+ ring->cmpl_read_offset =
+ readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ ring->cmpl_read_offset *= RING_DESC_SIZE;
+
+ /* Read ring Tx, Rx, and Outstanding counts to clear */
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_OUTSTAND);
+
+ /* Configure RING_MSI_CONTROL */
+ val = 0;
+ val |= (ring->msi_timer_val << MSI_TIMER_VAL_SHIFT);
+ val |= BIT(MSI_ENABLE_SHIFT);
+ val |= (ring->msi_count_threshold & MSI_COUNT_MASK) << MSI_COUNT_SHIFT;
+ writel_relaxed(val, ring->regs + RING_MSI_CONTROL);
+
+ /* Enable/activate ring */
+ val = BIT(CONTROL_ACTIVE_SHIFT);
+ writel_relaxed(val, ring->regs + RING_CONTROL);
+
+ return 0;
+
+fail_free_cmpl_memory:
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+fail_free_bd_memory:
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+fail:
+ return ret;
+}
+
+static void flexrm_shutdown(struct mbox_chan *chan)
+{
+ u32 reqid;
+ unsigned int timeout;
+ struct brcm_message *msg;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Flush ring with timeout of 1s */
+ timeout = 1000;
+ writel_relaxed(BIT(CONTROL_FLUSH_SHIFT),
+ ring->regs + RING_CONTROL);
+ do {
+ if (readl_relaxed(ring->regs + RING_FLUSH_DONE) &
+ FLUSH_DONE_MASK)
+ break;
+ mdelay(1);
+ } while (timeout--);
+
+ /* Abort all in-flight requests */
+ for (reqid = 0; reqid < RING_MAX_REQ_COUNT; reqid++) {
+ msg = ring->requests[reqid];
+ if (!msg)
+ continue;
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = -EIO;
+ mbox_chan_received_data(chan, msg);
+ }
+
+ /* Release IRQ */
+ if (ring->irq_requested) {
+ free_irq(ring->irq, ring);
+ ring->irq_requested = false;
+ }
+
+ /* Free-up completion descriptor ring */
+ if (ring->cmpl_base) {
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+ }
+
+ /* Free-up BD descriptor ring */
+ if (ring->bd_base) {
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+ }
+}
+
+static bool flexrm_last_tx_done(struct mbox_chan *chan)
+{
+ bool ret;
+ unsigned long flags;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ spin_lock_irqsave(&ring->lock, flags);
+ ret = (ring->last_pending_msg) ? false : true;
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ return ret;
+}
+
+static const struct mbox_chan_ops flexrm_mbox_chan_ops = {
+ .send_data = flexrm_send_data,
+ .startup = flexrm_startup,
+ .shutdown = flexrm_shutdown,
+ .last_tx_done = flexrm_last_tx_done,
+ .peek_data = flexrm_peek_data,
+};
+
+static void flexrm_mbox_msi_write(struct msi_desc *desc, struct msi_msg *msg)
+{
+ struct device *dev = msi_desc_to_dev(desc);
+ struct flexrm_mbox *mbox = dev_get_drvdata(dev);
+ struct flexrm_ring *ring = &mbox->rings[desc->platform.msi_index];
+
+ /* Configure per-Ring MSI registers */
+ writel_relaxed(msg->address_lo, ring->regs + RING_MSI_ADDR_LS);
+ writel_relaxed(msg->address_hi, ring->regs + RING_MSI_ADDR_MS);
+ writel_relaxed(msg->data, ring->regs + RING_MSI_DATA_VALUE);
+}
+
+static struct mbox_chan *flexrm_mbox_of_xlate(struct mbox_controller *cntlr,
+ const struct of_phandle_args *pa)
+{
+ struct mbox_chan *chan;
+ struct flexrm_ring *ring;
+
+ if (pa->args_count < 3)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[0] >= cntlr->num_chans)
+ return ERR_PTR(-ENOENT);
+
+ if (pa->args[1] > MSI_COUNT_MASK)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[2] > MSI_TIMER_VAL_MASK)
+ return ERR_PTR(-EINVAL);
+
+ chan = &cntlr->chans[pa->args[0]];
+ ring = chan->con_priv;
+ ring->msi_count_threshold = pa->args[1];
+ ring->msi_timer_val = pa->args[2];
+
+ return chan;
+}
+
+static int flexrm_mbox_probe(struct platform_device *pdev)
+{
+ int index, ret = 0;
+ void __iomem *regs;
+ void __iomem *regs_end;
+ struct msi_desc *desc;
+ struct resource *iomem;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox;
+ struct device *dev = &pdev->dev;
+
+ /* Allocate driver mailbox struct */
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->dev = dev;
+ platform_set_drvdata(pdev, mbox);
+
+ /* Get resource for registers */
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem || (resource_size(iomem) < RING_REGS_SIZE)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Map registers of all rings */
+ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(mbox->regs)) {
+ ret = PTR_ERR(mbox->regs);
+ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret);
+ goto fail;
+ }
+ regs_end = mbox->regs + resource_size(iomem);
+
+ /* Scan and count available rings */
+ mbox->num_rings = 0;
+ for (regs = mbox->regs; regs < regs_end; regs += RING_REGS_SIZE) {
+ if (readl_relaxed(regs + RING_VER) == RING_VER_MAGIC)
+ mbox->num_rings++;
+ }
+ if (!mbox->num_rings) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Allocate driver ring structs */
+ ring = devm_kcalloc(dev, mbox->num_rings, sizeof(*ring), GFP_KERNEL);
+ if (!ring) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->rings = ring;
+
+ /* Initialize members of driver ring structs */
+ regs = mbox->regs;
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ring->num = index;
+ ring->mbox = mbox;
+ while ((regs < regs_end) &&
+ (readl_relaxed(regs + RING_VER) != RING_VER_MAGIC))
+ regs += RING_REGS_SIZE;
+ if (regs_end <= regs) {
+ ret = -ENODEV;
+ goto fail;
+ }
+ ring->regs = regs;
+ regs += RING_REGS_SIZE;
+ ring->irq = UINT_MAX;
+ ring->irq_requested = false;
+ ring->msi_timer_val = MSI_TIMER_VAL_MASK;
+ ring->msi_count_threshold = 0x1;
+ ida_init(&ring->requests_ida);
+ memset(ring->requests, 0, sizeof(ring->requests));
+ ring->bd_base = NULL;
+ ring->bd_dma_base = 0;
+ ring->cmpl_base = NULL;
+ ring->cmpl_dma_base = 0;
+ spin_lock_init(&ring->lock);
+ ring->last_pending_msg = NULL;
+ ring->cmpl_read_offset = 0;
+ }
+
+ /* FlexRM is capable of 40-bit physical addresses only */
+ mbox->dma_mask = DMA_BIT_MASK(40);
+ dev->dma_mask = &mbox->dma_mask;
+
+ /* Create DMA pool for ring BD memory */
+ mbox->bd_pool = dma_pool_create("bd", dev, RING_BD_SIZE,
+ 1 << RING_BD_ALIGN_ORDER, 0);
+ if (!mbox->bd_pool) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Create DMA pool for ring completion memory */
+ mbox->cmpl_pool = dma_pool_create("cmpl", dev, RING_CMPL_SIZE,
+ 1 << RING_CMPL_ALIGN_ORDER, 0);
+ if (!mbox->cmpl_pool) {
+ ret = -ENOMEM;
+ goto fail_destroy_bd_pool;
+ }
+
+ /* Allocate platform MSIs for each ring */
+ ret = platform_msi_domain_alloc_irqs(dev, mbox->num_rings,
+ flexrm_mbox_msi_write);
+ if (ret)
+ goto fail_destroy_cmpl_pool;
+
+ /* Save alloced IRQ numbers for each ring */
+ for_each_msi_entry(desc, dev) {
+ ring = &mbox->rings[desc->platform.msi_index];
+ ring->irq = desc->irq;
+ }
+
+ /* Initialize mailbox controller */
+ mbox->controller.txdone_irq = false;
+ mbox->controller.txdone_poll = true;
+ mbox->controller.txpoll_period = 1;
+ mbox->controller.ops = &flexrm_mbox_chan_ops;
+ mbox->controller.dev = dev;
+ mbox->controller.num_chans = mbox->num_rings;
+ mbox->controller.of_xlate = flexrm_mbox_of_xlate;
+ mbox->controller.chans = devm_kcalloc(dev, mbox->num_rings,
+ sizeof(*mbox->controller.chans), GFP_KERNEL);
+ if (!mbox->controller.chans) {
+ ret = -ENOMEM;
+ goto fail_free_msis;
+ }
+ for (index = 0; index < mbox->num_rings; index++)
+ mbox->controller.chans[index].con_priv = &mbox->rings[index];
+
+ /* Register mailbox controller */
+ ret = mbox_controller_register(&mbox->controller);
+ if (ret)
+ goto fail_free_msis;
+
+ dev_info(dev, "registered flexrm mailbox with %d channels\n",
+ mbox->controller.num_chans);
+
+ return 0;
+
+fail_free_msis:
+ platform_msi_domain_free_irqs(dev);
+fail_destroy_cmpl_pool:
+ dma_pool_destroy(mbox->cmpl_pool);
+fail_destroy_bd_pool:
+ dma_pool_destroy(mbox->bd_pool);
+fail:
+ return ret;
+}
+
+static int flexrm_mbox_remove(struct platform_device *pdev)
+{
+ int index;
+ struct device *dev = &pdev->dev;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mbox->controller);
+
+ platform_msi_domain_free_irqs(dev);
+
+ dma_pool_destroy(mbox->cmpl_pool);
+ dma_pool_destroy(mbox->bd_pool);
+
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ida_destroy(&ring->requests_ida);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id flexrm_mbox_of_match[] = {
+ { .compatible = "brcm,iproc-flexrm-mbox", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, flexrm_mbox_of_match);
+
+static struct platform_driver flexrm_mbox_driver = {
+ .driver = {
+ .name = "brcm-flexrm-mbox",
+ .of_match_table = flexrm_mbox_of_match,
+ },
+ .probe = flexrm_mbox_probe,
+ .remove = flexrm_mbox_remove,
+};
+module_platform_driver(flexrm_mbox_driver);
+
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom FlexRM mailbox driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mailbox/brcm-message.h b/include/linux/mailbox/brcm-message.h
index 6b55c93..c20b484 100644
--- a/include/linux/mailbox/brcm-message.h
+++ b/include/linux/mailbox/brcm-message.h
@@ -16,6 +16,7 @@
enum brcm_message_type {
BRCM_MESSAGE_UNKNOWN = 0,
+ BRCM_MESSAGE_BATCH,
BRCM_MESSAGE_SPU,
BRCM_MESSAGE_SBA,
BRCM_MESSAGE_MAX,
@@ -23,24 +24,29 @@ enum brcm_message_type {
struct brcm_sba_command {
u64 cmd;
+ u64 *cmd_dma;
+ dma_addr_t cmd_dma_addr;
#define BRCM_SBA_CMD_TYPE_A BIT(0)
#define BRCM_SBA_CMD_TYPE_B BIT(1)
#define BRCM_SBA_CMD_TYPE_C BIT(2)
#define BRCM_SBA_CMD_HAS_RESP BIT(3)
#define BRCM_SBA_CMD_HAS_OUTPUT BIT(4)
u64 flags;
- dma_addr_t input;
- size_t input_len;
dma_addr_t resp;
size_t resp_len;
- dma_addr_t output;
- size_t output_len;
+ dma_addr_t data;
+ size_t data_len;
};
struct brcm_message {
enum brcm_message_type type;
union {
struct {
+ struct brcm_message *msgs;
+ unsigned int msgs_queued;
+ unsigned int msgs_count;
+ } batch;
+ struct {
struct scatterlist *src;
struct scatterlist *dst;
} spu;
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 1/2] mailbox: Add driver for Broadcom FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: Jassi Brar, Rob Herring
Cc: Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR, Rob Rice,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Anup Patel
Some of the Broadcom iProc SoCs have FlexRM ring manager
which provides a ring-based programming interface to various
offload engines (e.g. RAID, Crypto, etc).
This patch adds a common mailbox driver for Broadcom FlexRM
ring manager which can be shared by various offload engine
drivers (implemented as mailbox clients).
Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Pramod KUMAR <pramod.kumar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-flexrm/Makefile | 6 +
drivers/mailbox/mailbox-flexrm/flexrm-desc.c | 764 ++++++++++++++++++++++++
drivers/mailbox/mailbox-flexrm/flexrm-desc.h | 47 ++
drivers/mailbox/mailbox-flexrm/flexrm-main.c | 829 +++++++++++++++++++++++++++
include/linux/mailbox/brcm-message.h | 14 +-
7 files changed, 1669 insertions(+), 4 deletions(-)
create mode 100644 drivers/mailbox/mailbox-flexrm/Makefile
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.c
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.h
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-main.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ceff415..305018c 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -152,4 +152,15 @@ config BCM_PDC_MBOX
Mailbox implementation for the Broadcom PDC ring manager,
which provides access to various offload engines on Broadcom
SoCs. Say Y here if you want to use the Broadcom PDC.
+
+config BCM_FLEXRM_MBOX
+ tristate "Broadcom FlexRM Mailbox"
+ depends on ARM64 || COMPILE_TEST
+ depends on HAS_DMA
+ select GENERIC_MSI_IRQ_DOMAIN
+ default ARCH_BCM_IPROC
+ help
+ Mailbox implementation of the Broadcom FlexRM ring manager,
+ which provides access to various offload engines on Broadcom
+ SoCs. Say Y here if you want to use the Broadcom FlexRM.
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 7dde4f6..45083c0 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -30,4 +30,6 @@ obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += mailbox-flexrm/
+
obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o
diff --git a/drivers/mailbox/mailbox-flexrm/Makefile b/drivers/mailbox/mailbox-flexrm/Makefile
new file mode 100644
index 0000000..f5bf069
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Broadcom FlexRM Mailbox Driver.
+#
+
+flexrm-mbox-objs := flexrm-main.o flexrm-desc.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += flexrm-mbox.o
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.c b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
new file mode 100644
index 0000000..b0449eb
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
@@ -0,0 +1,764 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#include <asm/barrier.h>
+#include <asm/byteorder.h>
+#include <linux/dma-mapping.h>
+#include <linux/printk.h>
+
+#include "flexrm-desc.h"
+
+/* Completion descriptor format */
+#define CMPL_OPAQUE_SHIFT 0
+#define CMPL_OPAQUE_MASK 0xffff
+#define CMPL_ENGINE_STATUS_SHIFT 16
+#define CMPL_ENGINE_STATUS_MASK 0xffff
+#define CMPL_DME_STATUS_SHIFT 32
+#define CMPL_DME_STATUS_MASK 0xffff
+#define CMPL_RM_STATUS_SHIFT 48
+#define CMPL_RM_STATUS_MASK 0xffff
+
+/* Completion DME status code */
+#define DME_STATUS_MEM_COR_ERR BIT(0)
+#define DME_STATUS_MEM_UCOR_ERR BIT(1)
+#define DME_STATUS_FIFO_UNDERFLOW BIT(2)
+#define DME_STATUS_FIFO_OVERFLOW BIT(3)
+#define DME_STATUS_RRESP_ERR BIT(4)
+#define DME_STATUS_BRESP_ERR BIT(5)
+#define DME_STATUS_ERROR_MASK (DME_STATUS_MEM_COR_ERR | \
+ DME_STATUS_MEM_UCOR_ERR | \
+ DME_STATUS_FIFO_UNDERFLOW | \
+ DME_STATUS_FIFO_OVERFLOW | \
+ DME_STATUS_RRESP_ERR | \
+ DME_STATUS_BRESP_ERR)
+
+/* Completion RM status code */
+#define RM_STATUS_CODE_SHIFT 0
+#define RM_STATUS_CODE_MASK 0x3ff
+#define RM_STATUS_CODE_GOOD 0x0
+#define RM_STATUS_CODE_AE_TIMEOUT 0x3ff
+
+/* General descriptor format */
+#define DESC_TYPE_SHIFT 60
+#define DESC_TYPE_MASK 0xf
+#define DESC_PAYLOAD_SHIFT 0
+#define DESC_PAYLOAD_MASK 0x0fffffffffffffff
+
+/* Null descriptor format */
+#define NULL_TYPE 0
+#define NULL_TOGGLE_SHIFT 58
+#define NULL_TOGGLE_MASK 0x1
+
+/* Header descriptor format */
+#define HEADER_TYPE 1
+#define HEADER_TOGGLE_SHIFT 58
+#define HEADER_TOGGLE_MASK 0x1
+#define HEADER_ENDPKT_SHIFT 57
+#define HEADER_ENDPKT_MASK 0x1
+#define HEADER_STARTPKT_SHIFT 56
+#define HEADER_STARTPKT_MASK 0x1
+#define HEADER_BDCOUNT_SHIFT 36
+#define HEADER_BDCOUNT_MASK 0x1f
+#define HEADER_BDCOUNT_MAX HEADER_BDCOUNT_MASK
+#define HEADER_FLAGS_SHIFT 16
+#define HEADER_FLAGS_MASK 0xffff
+#define HEADER_OPAQUE_SHIFT 0
+#define HEADER_OPAQUE_MASK 0xffff
+
+/* Source (SRC) descriptor format */
+#define SRC_TYPE 2
+#define SRC_LENGTH_SHIFT 44
+#define SRC_LENGTH_MASK 0xffff
+#define SRC_ADDR_SHIFT 0
+#define SRC_ADDR_MASK 0x00000fffffffffff
+
+/* Destination (DST) descriptor format */
+#define DST_TYPE 3
+#define DST_LENGTH_SHIFT 44
+#define DST_LENGTH_MASK 0xffff
+#define DST_ADDR_SHIFT 0
+#define DST_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate (IMM) descriptor format */
+#define IMM_TYPE 4
+#define IMM_DATA_SHIFT 0
+#define IMM_DATA_MASK 0x0fffffffffffffff
+
+/* Next pointer (NPTR) descriptor format */
+#define NPTR_TYPE 5
+#define NPTR_TOGGLE_SHIFT 58
+#define NPTR_TOGGLE_MASK 0x1
+#define NPTR_ADDR_SHIFT 0
+#define NPTR_ADDR_MASK 0x00000fffffffffff
+
+/* Mega source (MSRC) descriptor format */
+#define MSRC_TYPE 6
+#define MSRC_LENGTH_SHIFT 44
+#define MSRC_LENGTH_MASK 0xffff
+#define MSRC_ADDR_SHIFT 0
+#define MSRC_ADDR_MASK 0x00000fffffffffff
+
+/* Mega destination (MDST) descriptor format */
+#define MDST_TYPE 7
+#define MDST_LENGTH_SHIFT 44
+#define MDST_LENGTH_MASK 0xffff
+#define MDST_ADDR_SHIFT 0
+#define MDST_ADDR_MASK 0x00000fffffffffff
+
+/* Source with tlast (SRCT) descriptor format */
+#define SRCT_TYPE 8
+#define SRCT_LENGTH_SHIFT 44
+#define SRCT_LENGTH_MASK 0xffff
+#define SRCT_ADDR_SHIFT 0
+#define SRCT_ADDR_MASK 0x00000fffffffffff
+
+/* Destination with tlast (DSTT) descriptor format */
+#define DSTT_TYPE 9
+#define DSTT_LENGTH_SHIFT 44
+#define DSTT_LENGTH_MASK 0xffff
+#define DSTT_ADDR_SHIFT 0
+#define DSTT_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate with tlast (IMMT) descriptor format */
+#define IMMT_TYPE 10
+#define IMMT_DATA_SHIFT 0
+#define IMMT_DATA_MASK 0x0fffffffffffffff
+
+/* Descriptor helper macros */
+#define DESC_DEC(_d, _s, _m) (((_d) >> (_s)) & (_m))
+#define DESC_ENC(_d, _v, _s, _m) \
+ do { \
+ (_d) &= ~((u64)(_m) << (_s)); \
+ (_d) |= (((u64)(_v) & (_m)) << (_s)); \
+ } while (0)
+
+u64 flexrm_read_desc(void *desc_ptr)
+{
+ return le64_to_cpu(*((u64 *)desc_ptr));
+}
+
+void flexrm_write_desc(void *desc_ptr, u64 desc)
+{
+ *((u64 *)desc_ptr) = cpu_to_le64(desc);
+}
+
+u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc)
+{
+ return (u32)(cmpl_desc & CMPL_OPAQUE_MASK);
+}
+
+int flexrm_cmpl_desc_to_error(u64 cmpl_desc)
+{
+ u32 status;
+
+ status = DESC_DEC(cmpl_desc, CMPL_DME_STATUS_SHIFT,
+ CMPL_DME_STATUS_MASK);
+ if (status & DME_STATUS_ERROR_MASK)
+ return -EIO;
+
+ status = DESC_DEC(cmpl_desc, CMPL_RM_STATUS_SHIFT,
+ CMPL_RM_STATUS_MASK);
+ status &= RM_STATUS_CODE_MASK;
+ if (status == RM_STATUS_CODE_AE_TIMEOUT)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+bool flexrm_is_next_table_desc(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+ u32 type = DESC_DEC(desc, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+
+ return (type == NPTR_TYPE) ? true : false;
+}
+
+u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NPTR_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NPTR_TOGGLE_SHIFT, NPTR_TOGGLE_MASK);
+ DESC_ENC(desc, next_addr, NPTR_ADDR_SHIFT, NPTR_ADDR_MASK);
+
+ return desc;
+}
+
+u64 flexrm_null_desc(u32 toggle)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NULL_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NULL_TOGGLE_SHIFT, NULL_TOGGLE_MASK);
+
+ return desc;
+}
+
+u32 flexrm_estimate_header_desc_count(u32 nhcnt)
+{
+ u32 hcnt = nhcnt / HEADER_BDCOUNT_MAX;
+
+ if (!(nhcnt % HEADER_BDCOUNT_MAX))
+ hcnt += 1;
+
+ return hcnt;
+}
+
+static void flexrm_flip_header_toogle(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+
+ if (desc & ((u64)0x1 << HEADER_TOGGLE_SHIFT))
+ desc &= ~((u64)0x1 << HEADER_TOGGLE_SHIFT);
+ else
+ desc |= ((u64)0x1 << HEADER_TOGGLE_SHIFT);
+
+ flexrm_write_desc(desc_ptr, desc);
+}
+
+static u64 flexrm_header_desc(u32 toggle, u32 startpkt, u32 endpkt,
+ u32 bdcount, u32 flags, u32 opaque)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, HEADER_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, HEADER_TOGGLE_SHIFT, HEADER_TOGGLE_MASK);
+ DESC_ENC(desc, startpkt, HEADER_STARTPKT_SHIFT, HEADER_STARTPKT_MASK);
+ DESC_ENC(desc, endpkt, HEADER_ENDPKT_SHIFT, HEADER_ENDPKT_MASK);
+ DESC_ENC(desc, bdcount, HEADER_BDCOUNT_SHIFT, HEADER_BDCOUNT_MASK);
+ DESC_ENC(desc, flags, HEADER_FLAGS_SHIFT, HEADER_FLAGS_MASK);
+ DESC_ENC(desc, opaque, HEADER_OPAQUE_SHIFT, HEADER_OPAQUE_MASK);
+
+ return desc;
+}
+
+static void flexrm_enqueue_desc(u32 nhpos, u32 nhcnt, u32 reqid,
+ u64 desc, void **desc_ptr, u32 *toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhavail, _toggle, _startpkt, _endpkt, _bdcount;
+
+ /* Sanity check */
+ if (nhcnt <= nhpos)
+ return;
+
+ /*
+ * Each request or packet start with a HEADER descriptor followed
+ * by one or more non-HEADER descriptors (SRC, SRCT, MSRC, DST,
+ * DSTT, MDST, IMM, and IMMT). The number of non-HEADER descriptors
+ * following a HEADER descriptor is represented by BDCOUNT field
+ * of HEADER descriptor. The max value of BDCOUNT field is 31 which
+ * means we can only have 31 non-HEADER descriptors following one
+ * HEADER descriptor.
+ *
+ * In general use, number of non-HEADER descriptors can easily go
+ * beyond 31. To tackle this situation, we have packet (or request)
+ * extenstion bits (STARTPKT and ENDPKT) in the HEADER descriptor.
+ *
+ * To use packet extension, the first HEADER descriptor of request
+ * (or packet) will have STARTPKT=1 and ENDPKT=0. The intermediate
+ * HEADER descriptors will have STARTPKT=0 and ENDPKT=0. The last
+ * HEADER descriptor will have STARTPKT=0 and ENDPKT=1. Also, the
+ * TOGGLE bit of the first HEADER will be set to invalid state to
+ * ensure that FlexRM does not start fetching descriptors till all
+ * descriptors are enqueued. The user of this function will flip
+ * the TOGGLE bit of first HEADER after all descriptors are
+ * enqueued.
+ */
+
+ if ((nhpos % HEADER_BDCOUNT_MAX == 0) && (nhcnt - nhpos)) {
+ /* Prepare the header descriptor */
+ nhavail = (nhcnt - nhpos);
+ _toggle = (nhpos == 0) ? !(*toggle) : (*toggle);
+ _startpkt = (nhpos == 0) ? 0x1 : 0x0;
+ _endpkt = (nhavail <= HEADER_BDCOUNT_MAX) ? 0x1 : 0x0;
+ _bdcount = (nhavail <= HEADER_BDCOUNT_MAX) ?
+ nhavail : HEADER_BDCOUNT_MAX;
+ if (nhavail <= HEADER_BDCOUNT_MAX)
+ _bdcount = nhavail;
+ else
+ _bdcount = HEADER_BDCOUNT_MAX;
+ d = flexrm_header_desc(_toggle, _startpkt, _endpkt,
+ _bdcount, 0x0, reqid);
+
+ /* Write header descriptor */
+ flexrm_write_desc(*desc_ptr, d);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+ }
+
+ /* Write desired descriptor */
+ flexrm_write_desc(*desc_ptr, desc);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+}
+
+static u64 flexrm_src_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRC_LENGTH_SHIFT, SRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRC_ADDR_SHIFT, SRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_msrc_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MSRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MSRC_LENGTH_SHIFT, MSRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, MSRC_ADDR_SHIFT, MSRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dst_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DST_LENGTH_SHIFT, DST_LENGTH_MASK);
+ DESC_ENC(desc, addr, DST_ADDR_SHIFT, DST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_mdst_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MDST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MDST_LENGTH_SHIFT, MDST_LENGTH_MASK);
+ DESC_ENC(desc, addr, MDST_ADDR_SHIFT, MDST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_imm_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMM_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMM_DATA_SHIFT, IMM_DATA_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_srct_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRCT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRCT_LENGTH_SHIFT, SRCT_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRCT_ADDR_SHIFT, SRCT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dstt_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DSTT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DSTT_LENGTH_SHIFT, DSTT_LENGTH_MASK);
+ DESC_ENC(desc, addr, DSTT_ADDR_SHIFT, DSTT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_immt_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMMT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMMT_DATA_SHIFT, IMMT_DATA_MASK);
+
+ return desc;
+}
+
+static bool flexrm_spu_sanity_check(struct brcm_message *msg)
+{
+ struct scatterlist *sg;
+
+ if (!msg->spu.src || !msg->spu.dst)
+ return false;
+ for (sg = msg->spu.src; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > SRC_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MSRC_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+ for (sg = msg->spu.dst; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > DST_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MDST_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static u32 flexrm_spu_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 cnt = 0;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ cnt++;
+ dst_target = src_sg->length;
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ cnt++;
+ if (dst_sg->length < dst_target)
+ dst_target -= dst_sg->length;
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ return cnt;
+}
+
+static int flexrm_spu_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ int rc;
+
+ rc = dma_map_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ if (rc < 0)
+ return rc;
+
+ rc = dma_map_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ if (rc < 0) {
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void flexrm_spu_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ dma_unmap_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+}
+
+static void *flexrm_spu_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhpos = 0;
+ void *orig_desc_ptr = desc_ptr;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ if (sg_dma_len(src_sg) & 0xf)
+ d = flexrm_src_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg));
+ else
+ d = flexrm_msrc_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ dst_target = sg_dma_len(src_sg);
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ if (sg_dma_len(dst_sg) & 0xf)
+ d = flexrm_dst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg));
+ else
+ d = flexrm_mdst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ if (sg_dma_len(dst_sg) < dst_target)
+ dst_target -= sg_dma_len(dst_sg);
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+static bool flexrm_sba_sanity_check(struct brcm_message *msg)
+{
+ u32 i;
+
+ if (!msg->sba.cmds || !msg->sba.cmds_count)
+ return false;
+
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ if (((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C)) &&
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (msg->sba.cmds[i].resp_len > DSTT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT) &&
+ (msg->sba.cmds[i].data_len > DSTT_LENGTH_MASK))
+ return false;
+ }
+
+ return true;
+}
+
+static u32 flexrm_sba_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 i, cnt;
+
+ cnt = 0;
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ cnt++;
+
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C))
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP)
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT)
+ cnt++;
+ }
+
+ return cnt;
+}
+
+static void *flexrm_sba_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 i, nhpos = 0;
+ struct brcm_sba_command *c;
+ void *orig_desc_ptr = desc_ptr;
+
+ /* Convert SBA commands into descriptors */
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ c = &msg->sba.cmds[i];
+
+ if ((c->flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (c->flags & BRCM_SBA_CMD_HAS_OUTPUT)) {
+ /* Destination response descriptor */
+ d = flexrm_dst_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else if (c->flags & BRCM_SBA_CMD_HAS_RESP) {
+ /* Destination response with tlast descriptor */
+ d = flexrm_dstt_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_HAS_OUTPUT) {
+ /* Destination with tlast descriptor */
+ d = flexrm_dstt_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_TYPE_B) {
+ /* Command as immediate descriptor */
+ d = flexrm_imm_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else {
+ /* Command as immediate descriptor with tlast */
+ d = flexrm_immt_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if ((c->flags & BRCM_SBA_CMD_TYPE_B) ||
+ (c->flags & BRCM_SBA_CMD_TYPE_C)) {
+ /* Source with tlast descriptor */
+ d = flexrm_srct_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+bool flexrm_sanity_check(struct brcm_message *msg)
+{
+ if (!msg)
+ return false;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_sanity_check(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_sanity_check(msg);
+ default:
+ return false;
+ };
+}
+
+u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ if (!msg)
+ return 0;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_estimate_nonheader_desc_count(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_estimate_nonheader_desc_count(msg);
+ default:
+ return 0;
+ };
+}
+
+int flexrm_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return -EINVAL;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_dma_map(dev, msg);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ flexrm_spu_dma_unmap(dev, msg);
+ break;
+ default:
+ break;
+ }
+}
+
+void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ if (!msg || !desc_ptr || !start_desc || !end_desc)
+ return ERR_PTR(-ENOTSUPP);
+
+ if ((desc_ptr < start_desc) || (end_desc <= desc_ptr))
+ return ERR_PTR(-ERANGE);
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ default:
+ return ERR_PTR(-ENOTSUPP);
+ };
+}
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.h b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
new file mode 100644
index 0000000..a95cf61
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
@@ -0,0 +1,47 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#ifndef __FLEXRM_DESC_H__
+#define __FLEXRM_DESC_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mailbox/brcm-message.h>
+
+extern u64 flexrm_read_desc(void *desc_ptr);
+
+extern void flexrm_write_desc(void *desc_ptr, u64 desc);
+
+extern u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc);
+
+extern int flexrm_cmpl_desc_to_error(u64 cmpl_desc);
+
+extern bool flexrm_is_next_table_desc(void *desc_ptr);
+
+extern u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr);
+
+extern u64 flexrm_null_desc(u32 toogle);
+
+extern u32 flexrm_estimate_header_desc_count(u32 nhcnt);
+
+extern bool flexrm_sanity_check(struct brcm_message *msg);
+
+extern u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg);
+
+extern int flexrm_dma_map(struct device *dev, struct brcm_message *msg);
+
+extern void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg);
+
+extern void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc);
+
+#endif /* __FLEXRM_DESC_H__ */
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-main.c b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
new file mode 100644
index 0000000..c8890f1
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
@@ -0,0 +1,829 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Each Broadcom FlexSparx4 offload engine is implemented as an
+ * extension to Broadcom FlexRM ring manager. The FlexRM ring
+ * manager provides a set of rings which can be used to submit
+ * work to a FlexSparx4 offload engine.
+ *
+ * This driver creates a mailbox controller using a set of FlexRM
+ * rings where each mailbox channel represents a separate FlexRM ring.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/brcm-message.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "flexrm-desc.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE 0x10000
+#define RING_DESC_SIZE 8
+#define RING_DESC_INDEX(offset) \
+ ((offset) / RING_DESC_SIZE)
+#define RING_DESC_OFFSET(index) \
+ ((index) * RING_DESC_SIZE)
+#define RING_MAX_REQ_COUNT 1024
+#define RING_BD_ALIGN_ORDER 12
+#define RING_BD_ALIGN_CHECK(addr) \
+ (!((addr) & ((0x1 << RING_BD_ALIGN_ORDER) - 1)))
+#define RING_BD_TOGGLE_INVALID(offset) \
+ (((offset) >> RING_BD_ALIGN_ORDER) & 0x1)
+#define RING_BD_TOGGLE_VALID(offset) \
+ (!RING_BD_TOGGLE_INVALID(offset))
+#define RING_BD_DESC_PER_REQ 32
+#define RING_BD_DESC_COUNT \
+ (RING_MAX_REQ_COUNT * RING_BD_DESC_PER_REQ)
+#define RING_BD_SIZE \
+ (RING_BD_DESC_COUNT * RING_DESC_SIZE)
+#define RING_CMPL_ALIGN_ORDER 13
+#define RING_CMPL_DESC_COUNT RING_MAX_REQ_COUNT
+#define RING_CMPL_SIZE \
+ (RING_CMPL_DESC_COUNT * RING_DESC_SIZE)
+#define RING_VER_MAGIC 0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER 0x000
+#define RING_BD_START_ADDR 0x004
+#define RING_BD_READ_PTR 0x008
+#define RING_BD_WRITE_PTR 0x00c
+#define RING_BD_READ_PTR_DDR_LS 0x010
+#define RING_BD_READ_PTR_DDR_MS 0x014
+#define RING_CMPL_START_ADDR 0x018
+#define RING_CMPL_WRITE_PTR 0x01c
+#define RING_NUM_REQ_RECV_LS 0x020
+#define RING_NUM_REQ_RECV_MS 0x024
+#define RING_NUM_REQ_TRANS_LS 0x028
+#define RING_NUM_REQ_TRANS_MS 0x02c
+#define RING_NUM_REQ_OUTSTAND 0x030
+#define RING_CONTROL 0x034
+#define RING_FLUSH_DONE 0x038
+#define RING_MSI_ADDR_LS 0x03c
+#define RING_MSI_ADDR_MS 0x040
+#define RING_MSI_CONTROL 0x048
+#define RING_BD_READ_PTR_DDR_CONTROL 0x04c
+#define RING_MSI_DATA_VALUE 0x064
+
+/* Register RING_BD_START_ADDR fields */
+#define BD_LAST_UPDATE_HW_SHIFT 28
+#define BD_LAST_UPDATE_HW_MASK 0x1
+#define BD_START_ADDR_VALUE(pa) \
+ ((u32)((((dma_addr_t)(pa)) >> RING_BD_ALIGN_ORDER) & 0x0fffffff))
+#define BD_START_ADDR_DECODE(val) \
+ ((dma_addr_t)((val) & 0x0fffffff) << RING_BD_ALIGN_ORDER)
+
+/* Register RING_CMPL_START_ADDR fields */
+#define CMPL_START_ADDR_VALUE(pa) \
+ ((u32)((((u64)(pa)) >> RING_CMPL_ALIGN_ORDER) & 0x03ffffff))
+
+/* Register RING_CONTROL fields */
+#define CONTROL_MASK_DISABLE_CONTROL 12
+#define CONTROL_FLUSH_SHIFT 5
+#define CONTROL_ACTIVE_SHIFT 4
+#define CONTROL_RATE_ADAPT_MASK 0xf
+#define CONTROL_RATE_DYNAMIC 0x0
+#define CONTROL_RATE_FAST 0x8
+#define CONTROL_RATE_MEDIUM 0x9
+#define CONTROL_RATE_SLOW 0xa
+#define CONTROL_RATE_IDLE 0xb
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK 0x1
+
+/* Register RING_MSI_CONTROL fields */
+#define MSI_TIMER_VAL_SHIFT 16
+#define MSI_TIMER_VAL_MASK 0xffff
+#define MSI_ENABLE_SHIFT 15
+#define MSI_ENABLE_MASK 0x1
+#define MSI_COUNT_SHIFT 0
+#define MSI_COUNT_MASK 0x3ff
+
+/* Register RING_BD_READ_PTR_DDR_CONTROL fields */
+#define BD_READ_PTR_DDR_TIMER_VAL_SHIFT 16
+#define BD_READ_PTR_DDR_TIMER_VAL_MASK 0xffff
+#define BD_READ_PTR_DDR_ENABLE_SHIFT 15
+#define BD_READ_PTR_DDR_ENABLE_MASK 0x1
+
+struct flexrm_ring {
+ /* Unprotected members */
+ int num;
+ struct flexrm_mbox *mbox;
+ void __iomem *regs;
+ bool irq_requested;
+ unsigned int irq;
+ unsigned int msi_timer_val;
+ unsigned int msi_count_threshold;
+ struct ida requests_ida;
+ struct brcm_message *requests[RING_MAX_REQ_COUNT];
+ void *bd_base;
+ dma_addr_t bd_dma_base;
+ u32 bd_write_offset;
+ void *cmpl_base;
+ dma_addr_t cmpl_dma_base;
+ /* Protected members */
+ spinlock_t lock;
+ struct brcm_message *last_pending_msg;
+ u32 cmpl_read_offset;
+};
+
+struct flexrm_mbox {
+ struct device *dev;
+ void __iomem *regs;
+ u32 num_rings;
+ struct flexrm_ring *rings;
+ u64 dma_mask;
+ struct dma_pool *bd_pool;
+ struct dma_pool *cmpl_pool;
+ struct mbox_controller controller;
+};
+
+static int flexrm_new_request(struct flexrm_ring *ring,
+ struct brcm_message *batch_msg,
+ struct brcm_message *msg)
+{
+ void *next;
+ unsigned long flags;
+ u32 val, count, nhcnt;
+ u32 read_offset, write_offset;
+ bool exit_cleanup = false;
+ int ret = 0, reqid;
+
+ /* Do sanity check on message */
+ if (!flexrm_sanity_check(msg))
+ return -EIO;
+ msg->error = 0;
+
+ /* If no requests possible then save data pointer and goto done. */
+ reqid = ida_simple_get(&ring->requests_ida, 0,
+ RING_MAX_REQ_COUNT, GFP_KERNEL);
+ if (reqid < 0) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ return 0;
+ }
+ ring->requests[reqid] = msg;
+
+ /* Do DMA mappings for the message */
+ ret = flexrm_dma_map(ring->mbox->dev, msg);
+ if (ret < 0) {
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ return ret;
+ }
+
+ /* If last_pending_msg is already set then goto done with error */
+ spin_lock_irqsave(&ring->lock, flags);
+ if (ring->last_pending_msg)
+ ret = -ENOSPC;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ if (ret < 0) {
+ dev_warn(ring->mbox->dev, "no space in ring %d\n", ring->num);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Determine current HW BD read offset */
+ read_offset = readl_relaxed(ring->regs + RING_BD_READ_PTR);
+ val = readl_relaxed(ring->regs + RING_BD_START_ADDR);
+ read_offset *= RING_DESC_SIZE;
+ read_offset += (u32)(BD_START_ADDR_DECODE(val) - ring->bd_dma_base);
+
+ /*
+ * Number required descriptors = number of non-header descriptors +
+ * number of header descriptors +
+ * 1x null descriptor
+ */
+ nhcnt = flexrm_estimate_nonheader_desc_count(msg);
+ count = flexrm_estimate_header_desc_count(nhcnt) + nhcnt + 1;
+
+ /* Check for available descriptor space. */
+ write_offset = ring->bd_write_offset;
+ while (count) {
+ if (!flexrm_is_next_table_desc(ring->bd_base + write_offset))
+ count--;
+ write_offset += RING_DESC_SIZE;
+ if (write_offset == RING_BD_SIZE)
+ write_offset = 0x0;
+ if (write_offset == read_offset)
+ break;
+ }
+ if (count) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ ret = 0;
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Write descriptors to ring */
+ next = flexrm_write_descs(msg, nhcnt, reqid,
+ ring->bd_base + ring->bd_write_offset,
+ RING_BD_TOGGLE_VALID(ring->bd_write_offset),
+ ring->bd_base, ring->bd_base + RING_BD_SIZE);
+ if (IS_ERR(next)) {
+ ret = PTR_ERR(next);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Save ring BD write offset */
+ ring->bd_write_offset = (unsigned long)(next - ring->bd_base);
+
+exit:
+ /* Update error status in message */
+ msg->error = ret;
+
+ /* Cleanup if we failed */
+ if (exit_cleanup) {
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ }
+
+ return ret;
+}
+
+static int flexrm_process_completions(struct flexrm_ring *ring)
+{
+ u64 desc;
+ int err, count = 0;
+ unsigned long flags;
+ struct brcm_message *msg = NULL;
+ u32 reqid, cmpl_read_offset, cmpl_write_offset;
+ struct mbox_chan *chan = &ring->mbox->controller.chans[ring->num];
+
+ spin_lock_irqsave(&ring->lock, flags);
+
+ /* Check last_pending_msg */
+ if (ring->last_pending_msg) {
+ msg = ring->last_pending_msg;
+ ring->last_pending_msg = NULL;
+ }
+
+ /*
+ * Get current completion read and write offset
+ *
+ * Note: We should read completion write pointer atleast once
+ * after we get a MSI interrupt because HW maintains internal
+ * MSI status which will allow next MSI interrupt only after
+ * completion write pointer is read.
+ */
+ cmpl_write_offset = readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ cmpl_write_offset *= RING_DESC_SIZE;
+ cmpl_read_offset = ring->cmpl_read_offset;
+ ring->cmpl_read_offset = cmpl_write_offset;
+
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ /* If last_pending_msg was set then queue it back */
+ if (msg)
+ mbox_send_message(chan, msg);
+
+ /* For each completed request notify mailbox clients */
+ reqid = 0;
+ while (cmpl_read_offset != cmpl_write_offset) {
+ /* Dequeue next completion descriptor */
+ desc = *((u64 *)(ring->cmpl_base + cmpl_read_offset));
+
+ /* Next read offset */
+ cmpl_read_offset += RING_DESC_SIZE;
+ if (cmpl_read_offset == RING_CMPL_SIZE)
+ cmpl_read_offset = 0;
+
+ /* Decode error from completion descriptor */
+ err = flexrm_cmpl_desc_to_error(desc);
+ if (err < 0) {
+ dev_warn(ring->mbox->dev,
+ "got completion desc=0x%lx with error %d",
+ (unsigned long)desc, err);
+ }
+
+ /* Determine request id from completion descriptor */
+ reqid = flexrm_cmpl_desc_to_reqid(desc);
+
+ /* Determine message pointer based on reqid */
+ msg = ring->requests[reqid];
+ if (!msg) {
+ dev_warn(ring->mbox->dev,
+ "null msg pointer for completion desc=0x%lx",
+ (unsigned long)desc);
+ continue;
+ }
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = err;
+ mbox_chan_received_data(chan, msg);
+
+ /* Increment number of completions processed */
+ count++;
+ }
+
+ return count;
+}
+
+static irqreturn_t flexrm_irq_event(int irq, void *dev_id)
+{
+ /* We only have MSI for completions so just wakeup IRQ thread */
+ /* Ring related errors will be informed via completion descriptors */
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t flexrm_irq_thread(int irq, void *dev_id)
+{
+ flexrm_process_completions(dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int flexrm_send_data(struct mbox_chan *chan, void *data)
+{
+ int i, rc;
+ struct flexrm_ring *ring = chan->con_priv;
+ struct brcm_message *msg = data;
+
+ if (msg->type == BRCM_MESSAGE_BATCH) {
+ for (i = msg->batch.msgs_queued;
+ i < msg->batch.msgs_count; i++) {
+ rc = flexrm_new_request(ring, msg,
+ &msg->batch.msgs[i]);
+ if (rc) {
+ msg->error = rc;
+ return rc;
+ }
+ msg->batch.msgs_queued++;
+ }
+ return 0;
+ }
+
+ return flexrm_new_request(ring, NULL, data);
+}
+
+static bool flexrm_peek_data(struct mbox_chan *chan)
+{
+ int cnt = flexrm_process_completions(chan->con_priv);
+
+ return (cnt > 0) ? true : false;
+}
+
+static int flexrm_startup(struct mbox_chan *chan)
+{
+ u64 d;
+ u32 val, off;
+ int ret = 0;
+ dma_addr_t next_addr;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Allocate BD memory */
+ ring->bd_base = dma_pool_alloc(ring->mbox->bd_pool,
+ GFP_KERNEL, &ring->bd_dma_base);
+ if (!ring->bd_base) {
+ dev_err(ring->mbox->dev, "can't allocate BD memory\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Configure next table pointer entries in BD memory */
+ for (off = 0; off < RING_BD_SIZE; off += RING_DESC_SIZE) {
+ next_addr = off + RING_DESC_SIZE;
+ if (next_addr == RING_BD_SIZE)
+ next_addr = 0;
+ next_addr += ring->bd_dma_base;
+ if (RING_BD_ALIGN_CHECK(next_addr))
+ d = flexrm_next_table_desc(RING_BD_TOGGLE_VALID(off),
+ next_addr);
+ else
+ d = flexrm_null_desc(RING_BD_TOGGLE_INVALID(off));
+ flexrm_write_desc(ring->bd_base + off, d);
+ }
+
+ /* Allocate completion memory */
+ ring->cmpl_base = dma_pool_alloc(ring->mbox->cmpl_pool,
+ GFP_KERNEL, &ring->cmpl_dma_base);
+ if (!ring->cmpl_base) {
+ dev_err(ring->mbox->dev, "can't allocate completion memory\n");
+ ret = -ENOMEM;
+ goto fail_free_bd_memory;
+ }
+ memset(ring->cmpl_base, 0, RING_CMPL_SIZE);
+
+ /* Request IRQ */
+ if (ring->irq == UINT_MAX) {
+ dev_err(ring->mbox->dev, "ring IRQ not available\n");
+ ret = -ENODEV;
+ goto fail_free_cmpl_memory;
+ }
+ ret = request_threaded_irq(ring->irq,
+ flexrm_irq_event,
+ flexrm_irq_thread,
+ 0, dev_name(ring->mbox->dev), ring);
+ if (ret) {
+ dev_err(ring->mbox->dev, "failed to request ring IRQ\n");
+ goto fail_free_cmpl_memory;
+ }
+ ring->irq_requested = true;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Program BD start address */
+ val = BD_START_ADDR_VALUE(ring->bd_dma_base);
+ writel_relaxed(val, ring->regs + RING_BD_START_ADDR);
+
+ /* BD write pointer will be same as HW write pointer */
+ ring->bd_write_offset =
+ readl_relaxed(ring->regs + RING_BD_WRITE_PTR);
+ ring->bd_write_offset *= RING_DESC_SIZE;
+
+ /* Program completion start address */
+ val = CMPL_START_ADDR_VALUE(ring->cmpl_dma_base);
+ writel_relaxed(val, ring->regs + RING_CMPL_START_ADDR);
+
+ /* Ensure last pending message is cleared */
+ ring->last_pending_msg = NULL;
+
+ /* Completion read pointer will be same as HW write pointer */
+ ring->cmpl_read_offset =
+ readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ ring->cmpl_read_offset *= RING_DESC_SIZE;
+
+ /* Read ring Tx, Rx, and Outstanding counts to clear */
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_OUTSTAND);
+
+ /* Configure RING_MSI_CONTROL */
+ val = 0;
+ val |= (ring->msi_timer_val << MSI_TIMER_VAL_SHIFT);
+ val |= BIT(MSI_ENABLE_SHIFT);
+ val |= (ring->msi_count_threshold & MSI_COUNT_MASK) << MSI_COUNT_SHIFT;
+ writel_relaxed(val, ring->regs + RING_MSI_CONTROL);
+
+ /* Enable/activate ring */
+ val = BIT(CONTROL_ACTIVE_SHIFT);
+ writel_relaxed(val, ring->regs + RING_CONTROL);
+
+ return 0;
+
+fail_free_cmpl_memory:
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+fail_free_bd_memory:
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+fail:
+ return ret;
+}
+
+static void flexrm_shutdown(struct mbox_chan *chan)
+{
+ u32 reqid;
+ unsigned int timeout;
+ struct brcm_message *msg;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Flush ring with timeout of 1s */
+ timeout = 1000;
+ writel_relaxed(BIT(CONTROL_FLUSH_SHIFT),
+ ring->regs + RING_CONTROL);
+ do {
+ if (readl_relaxed(ring->regs + RING_FLUSH_DONE) &
+ FLUSH_DONE_MASK)
+ break;
+ mdelay(1);
+ } while (timeout--);
+
+ /* Abort all in-flight requests */
+ for (reqid = 0; reqid < RING_MAX_REQ_COUNT; reqid++) {
+ msg = ring->requests[reqid];
+ if (!msg)
+ continue;
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = -EIO;
+ mbox_chan_received_data(chan, msg);
+ }
+
+ /* Release IRQ */
+ if (ring->irq_requested) {
+ free_irq(ring->irq, ring);
+ ring->irq_requested = false;
+ }
+
+ /* Free-up completion descriptor ring */
+ if (ring->cmpl_base) {
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+ }
+
+ /* Free-up BD descriptor ring */
+ if (ring->bd_base) {
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+ }
+}
+
+static bool flexrm_last_tx_done(struct mbox_chan *chan)
+{
+ bool ret;
+ unsigned long flags;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ spin_lock_irqsave(&ring->lock, flags);
+ ret = (ring->last_pending_msg) ? false : true;
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ return ret;
+}
+
+static const struct mbox_chan_ops flexrm_mbox_chan_ops = {
+ .send_data = flexrm_send_data,
+ .startup = flexrm_startup,
+ .shutdown = flexrm_shutdown,
+ .last_tx_done = flexrm_last_tx_done,
+ .peek_data = flexrm_peek_data,
+};
+
+static void flexrm_mbox_msi_write(struct msi_desc *desc, struct msi_msg *msg)
+{
+ struct device *dev = msi_desc_to_dev(desc);
+ struct flexrm_mbox *mbox = dev_get_drvdata(dev);
+ struct flexrm_ring *ring = &mbox->rings[desc->platform.msi_index];
+
+ /* Configure per-Ring MSI registers */
+ writel_relaxed(msg->address_lo, ring->regs + RING_MSI_ADDR_LS);
+ writel_relaxed(msg->address_hi, ring->regs + RING_MSI_ADDR_MS);
+ writel_relaxed(msg->data, ring->regs + RING_MSI_DATA_VALUE);
+}
+
+static struct mbox_chan *flexrm_mbox_of_xlate(struct mbox_controller *cntlr,
+ const struct of_phandle_args *pa)
+{
+ struct mbox_chan *chan;
+ struct flexrm_ring *ring;
+
+ if (pa->args_count < 3)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[0] >= cntlr->num_chans)
+ return ERR_PTR(-ENOENT);
+
+ if (pa->args[1] > MSI_COUNT_MASK)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[2] > MSI_TIMER_VAL_MASK)
+ return ERR_PTR(-EINVAL);
+
+ chan = &cntlr->chans[pa->args[0]];
+ ring = chan->con_priv;
+ ring->msi_count_threshold = pa->args[1];
+ ring->msi_timer_val = pa->args[2];
+
+ return chan;
+}
+
+static int flexrm_mbox_probe(struct platform_device *pdev)
+{
+ int index, ret = 0;
+ void __iomem *regs;
+ void __iomem *regs_end;
+ struct msi_desc *desc;
+ struct resource *iomem;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox;
+ struct device *dev = &pdev->dev;
+
+ /* Allocate driver mailbox struct */
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->dev = dev;
+ platform_set_drvdata(pdev, mbox);
+
+ /* Get resource for registers */
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem || (resource_size(iomem) < RING_REGS_SIZE)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Map registers of all rings */
+ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(mbox->regs)) {
+ ret = PTR_ERR(mbox->regs);
+ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret);
+ goto fail;
+ }
+ regs_end = mbox->regs + resource_size(iomem);
+
+ /* Scan and count available rings */
+ mbox->num_rings = 0;
+ for (regs = mbox->regs; regs < regs_end; regs += RING_REGS_SIZE) {
+ if (readl_relaxed(regs + RING_VER) == RING_VER_MAGIC)
+ mbox->num_rings++;
+ }
+ if (!mbox->num_rings) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Allocate driver ring structs */
+ ring = devm_kcalloc(dev, mbox->num_rings, sizeof(*ring), GFP_KERNEL);
+ if (!ring) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->rings = ring;
+
+ /* Initialize members of driver ring structs */
+ regs = mbox->regs;
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ring->num = index;
+ ring->mbox = mbox;
+ while ((regs < regs_end) &&
+ (readl_relaxed(regs + RING_VER) != RING_VER_MAGIC))
+ regs += RING_REGS_SIZE;
+ if (regs_end <= regs) {
+ ret = -ENODEV;
+ goto fail;
+ }
+ ring->regs = regs;
+ regs += RING_REGS_SIZE;
+ ring->irq = UINT_MAX;
+ ring->irq_requested = false;
+ ring->msi_timer_val = MSI_TIMER_VAL_MASK;
+ ring->msi_count_threshold = 0x1;
+ ida_init(&ring->requests_ida);
+ memset(ring->requests, 0, sizeof(ring->requests));
+ ring->bd_base = NULL;
+ ring->bd_dma_base = 0;
+ ring->cmpl_base = NULL;
+ ring->cmpl_dma_base = 0;
+ spin_lock_init(&ring->lock);
+ ring->last_pending_msg = NULL;
+ ring->cmpl_read_offset = 0;
+ }
+
+ /* FlexRM is capable of 40-bit physical addresses only */
+ mbox->dma_mask = DMA_BIT_MASK(40);
+ dev->dma_mask = &mbox->dma_mask;
+
+ /* Create DMA pool for ring BD memory */
+ mbox->bd_pool = dma_pool_create("bd", dev, RING_BD_SIZE,
+ 1 << RING_BD_ALIGN_ORDER, 0);
+ if (!mbox->bd_pool) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Create DMA pool for ring completion memory */
+ mbox->cmpl_pool = dma_pool_create("cmpl", dev, RING_CMPL_SIZE,
+ 1 << RING_CMPL_ALIGN_ORDER, 0);
+ if (!mbox->cmpl_pool) {
+ ret = -ENOMEM;
+ goto fail_destroy_bd_pool;
+ }
+
+ /* Allocate platform MSIs for each ring */
+ ret = platform_msi_domain_alloc_irqs(dev, mbox->num_rings,
+ flexrm_mbox_msi_write);
+ if (ret)
+ goto fail_destroy_cmpl_pool;
+
+ /* Save alloced IRQ numbers for each ring */
+ for_each_msi_entry(desc, dev) {
+ ring = &mbox->rings[desc->platform.msi_index];
+ ring->irq = desc->irq;
+ }
+
+ /* Initialize mailbox controller */
+ mbox->controller.txdone_irq = false;
+ mbox->controller.txdone_poll = true;
+ mbox->controller.txpoll_period = 1;
+ mbox->controller.ops = &flexrm_mbox_chan_ops;
+ mbox->controller.dev = dev;
+ mbox->controller.num_chans = mbox->num_rings;
+ mbox->controller.of_xlate = flexrm_mbox_of_xlate;
+ mbox->controller.chans = devm_kcalloc(dev, mbox->num_rings,
+ sizeof(*mbox->controller.chans), GFP_KERNEL);
+ if (!mbox->controller.chans) {
+ ret = -ENOMEM;
+ goto fail_free_msis;
+ }
+ for (index = 0; index < mbox->num_rings; index++)
+ mbox->controller.chans[index].con_priv = &mbox->rings[index];
+
+ /* Register mailbox controller */
+ ret = mbox_controller_register(&mbox->controller);
+ if (ret)
+ goto fail_free_msis;
+
+ dev_info(dev, "registered flexrm mailbox with %d channels\n",
+ mbox->controller.num_chans);
+
+ return 0;
+
+fail_free_msis:
+ platform_msi_domain_free_irqs(dev);
+fail_destroy_cmpl_pool:
+ dma_pool_destroy(mbox->cmpl_pool);
+fail_destroy_bd_pool:
+ dma_pool_destroy(mbox->bd_pool);
+fail:
+ return ret;
+}
+
+static int flexrm_mbox_remove(struct platform_device *pdev)
+{
+ int index;
+ struct device *dev = &pdev->dev;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mbox->controller);
+
+ platform_msi_domain_free_irqs(dev);
+
+ dma_pool_destroy(mbox->cmpl_pool);
+ dma_pool_destroy(mbox->bd_pool);
+
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ida_destroy(&ring->requests_ida);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id flexrm_mbox_of_match[] = {
+ { .compatible = "brcm,iproc-flexrm-mbox", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, flexrm_mbox_of_match);
+
+static struct platform_driver flexrm_mbox_driver = {
+ .driver = {
+ .name = "brcm-flexrm-mbox",
+ .of_match_table = flexrm_mbox_of_match,
+ },
+ .probe = flexrm_mbox_probe,
+ .remove = flexrm_mbox_remove,
+};
+module_platform_driver(flexrm_mbox_driver);
+
+MODULE_AUTHOR("Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Broadcom FlexRM mailbox driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mailbox/brcm-message.h b/include/linux/mailbox/brcm-message.h
index 6b55c93..c20b484 100644
--- a/include/linux/mailbox/brcm-message.h
+++ b/include/linux/mailbox/brcm-message.h
@@ -16,6 +16,7 @@
enum brcm_message_type {
BRCM_MESSAGE_UNKNOWN = 0,
+ BRCM_MESSAGE_BATCH,
BRCM_MESSAGE_SPU,
BRCM_MESSAGE_SBA,
BRCM_MESSAGE_MAX,
@@ -23,24 +24,29 @@ enum brcm_message_type {
struct brcm_sba_command {
u64 cmd;
+ u64 *cmd_dma;
+ dma_addr_t cmd_dma_addr;
#define BRCM_SBA_CMD_TYPE_A BIT(0)
#define BRCM_SBA_CMD_TYPE_B BIT(1)
#define BRCM_SBA_CMD_TYPE_C BIT(2)
#define BRCM_SBA_CMD_HAS_RESP BIT(3)
#define BRCM_SBA_CMD_HAS_OUTPUT BIT(4)
u64 flags;
- dma_addr_t input;
- size_t input_len;
dma_addr_t resp;
size_t resp_len;
- dma_addr_t output;
- size_t output_len;
+ dma_addr_t data;
+ size_t data_len;
};
struct brcm_message {
enum brcm_message_type type;
union {
struct {
+ struct brcm_message *msgs;
+ unsigned int msgs_queued;
+ unsigned int msgs_count;
+ } batch;
+ struct {
struct scatterlist *src;
struct scatterlist *dst;
} spu;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 1/2] mailbox: Add driver for Broadcom FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: linux-arm-kernel
Some of the Broadcom iProc SoCs have FlexRM ring manager
which provides a ring-based programming interface to various
offload engines (e.g. RAID, Crypto, etc).
This patch adds a common mailbox driver for Broadcom FlexRM
ring manager which can be shared by various offload engine
drivers (implemented as mailbox clients).
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-flexrm/Makefile | 6 +
drivers/mailbox/mailbox-flexrm/flexrm-desc.c | 764 ++++++++++++++++++++++++
drivers/mailbox/mailbox-flexrm/flexrm-desc.h | 47 ++
drivers/mailbox/mailbox-flexrm/flexrm-main.c | 829 +++++++++++++++++++++++++++
include/linux/mailbox/brcm-message.h | 14 +-
7 files changed, 1669 insertions(+), 4 deletions(-)
create mode 100644 drivers/mailbox/mailbox-flexrm/Makefile
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.c
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-desc.h
create mode 100644 drivers/mailbox/mailbox-flexrm/flexrm-main.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ceff415..305018c 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -152,4 +152,15 @@ config BCM_PDC_MBOX
Mailbox implementation for the Broadcom PDC ring manager,
which provides access to various offload engines on Broadcom
SoCs. Say Y here if you want to use the Broadcom PDC.
+
+config BCM_FLEXRM_MBOX
+ tristate "Broadcom FlexRM Mailbox"
+ depends on ARM64 || COMPILE_TEST
+ depends on HAS_DMA
+ select GENERIC_MSI_IRQ_DOMAIN
+ default ARCH_BCM_IPROC
+ help
+ Mailbox implementation of the Broadcom FlexRM ring manager,
+ which provides access to various offload engines on Broadcom
+ SoCs. Say Y here if you want to use the Broadcom FlexRM.
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 7dde4f6..45083c0 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -30,4 +30,6 @@ obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += mailbox-flexrm/
+
obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o
diff --git a/drivers/mailbox/mailbox-flexrm/Makefile b/drivers/mailbox/mailbox-flexrm/Makefile
new file mode 100644
index 0000000..f5bf069
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Broadcom FlexRM Mailbox Driver.
+#
+
+flexrm-mbox-objs := flexrm-main.o flexrm-desc.o
+obj-$(CONFIG_BCM_FLEXRM_MBOX) += flexrm-mbox.o
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.c b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
new file mode 100644
index 0000000..b0449eb
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.c
@@ -0,0 +1,764 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#include <asm/barrier.h>
+#include <asm/byteorder.h>
+#include <linux/dma-mapping.h>
+#include <linux/printk.h>
+
+#include "flexrm-desc.h"
+
+/* Completion descriptor format */
+#define CMPL_OPAQUE_SHIFT 0
+#define CMPL_OPAQUE_MASK 0xffff
+#define CMPL_ENGINE_STATUS_SHIFT 16
+#define CMPL_ENGINE_STATUS_MASK 0xffff
+#define CMPL_DME_STATUS_SHIFT 32
+#define CMPL_DME_STATUS_MASK 0xffff
+#define CMPL_RM_STATUS_SHIFT 48
+#define CMPL_RM_STATUS_MASK 0xffff
+
+/* Completion DME status code */
+#define DME_STATUS_MEM_COR_ERR BIT(0)
+#define DME_STATUS_MEM_UCOR_ERR BIT(1)
+#define DME_STATUS_FIFO_UNDERFLOW BIT(2)
+#define DME_STATUS_FIFO_OVERFLOW BIT(3)
+#define DME_STATUS_RRESP_ERR BIT(4)
+#define DME_STATUS_BRESP_ERR BIT(5)
+#define DME_STATUS_ERROR_MASK (DME_STATUS_MEM_COR_ERR | \
+ DME_STATUS_MEM_UCOR_ERR | \
+ DME_STATUS_FIFO_UNDERFLOW | \
+ DME_STATUS_FIFO_OVERFLOW | \
+ DME_STATUS_RRESP_ERR | \
+ DME_STATUS_BRESP_ERR)
+
+/* Completion RM status code */
+#define RM_STATUS_CODE_SHIFT 0
+#define RM_STATUS_CODE_MASK 0x3ff
+#define RM_STATUS_CODE_GOOD 0x0
+#define RM_STATUS_CODE_AE_TIMEOUT 0x3ff
+
+/* General descriptor format */
+#define DESC_TYPE_SHIFT 60
+#define DESC_TYPE_MASK 0xf
+#define DESC_PAYLOAD_SHIFT 0
+#define DESC_PAYLOAD_MASK 0x0fffffffffffffff
+
+/* Null descriptor format */
+#define NULL_TYPE 0
+#define NULL_TOGGLE_SHIFT 58
+#define NULL_TOGGLE_MASK 0x1
+
+/* Header descriptor format */
+#define HEADER_TYPE 1
+#define HEADER_TOGGLE_SHIFT 58
+#define HEADER_TOGGLE_MASK 0x1
+#define HEADER_ENDPKT_SHIFT 57
+#define HEADER_ENDPKT_MASK 0x1
+#define HEADER_STARTPKT_SHIFT 56
+#define HEADER_STARTPKT_MASK 0x1
+#define HEADER_BDCOUNT_SHIFT 36
+#define HEADER_BDCOUNT_MASK 0x1f
+#define HEADER_BDCOUNT_MAX HEADER_BDCOUNT_MASK
+#define HEADER_FLAGS_SHIFT 16
+#define HEADER_FLAGS_MASK 0xffff
+#define HEADER_OPAQUE_SHIFT 0
+#define HEADER_OPAQUE_MASK 0xffff
+
+/* Source (SRC) descriptor format */
+#define SRC_TYPE 2
+#define SRC_LENGTH_SHIFT 44
+#define SRC_LENGTH_MASK 0xffff
+#define SRC_ADDR_SHIFT 0
+#define SRC_ADDR_MASK 0x00000fffffffffff
+
+/* Destination (DST) descriptor format */
+#define DST_TYPE 3
+#define DST_LENGTH_SHIFT 44
+#define DST_LENGTH_MASK 0xffff
+#define DST_ADDR_SHIFT 0
+#define DST_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate (IMM) descriptor format */
+#define IMM_TYPE 4
+#define IMM_DATA_SHIFT 0
+#define IMM_DATA_MASK 0x0fffffffffffffff
+
+/* Next pointer (NPTR) descriptor format */
+#define NPTR_TYPE 5
+#define NPTR_TOGGLE_SHIFT 58
+#define NPTR_TOGGLE_MASK 0x1
+#define NPTR_ADDR_SHIFT 0
+#define NPTR_ADDR_MASK 0x00000fffffffffff
+
+/* Mega source (MSRC) descriptor format */
+#define MSRC_TYPE 6
+#define MSRC_LENGTH_SHIFT 44
+#define MSRC_LENGTH_MASK 0xffff
+#define MSRC_ADDR_SHIFT 0
+#define MSRC_ADDR_MASK 0x00000fffffffffff
+
+/* Mega destination (MDST) descriptor format */
+#define MDST_TYPE 7
+#define MDST_LENGTH_SHIFT 44
+#define MDST_LENGTH_MASK 0xffff
+#define MDST_ADDR_SHIFT 0
+#define MDST_ADDR_MASK 0x00000fffffffffff
+
+/* Source with tlast (SRCT) descriptor format */
+#define SRCT_TYPE 8
+#define SRCT_LENGTH_SHIFT 44
+#define SRCT_LENGTH_MASK 0xffff
+#define SRCT_ADDR_SHIFT 0
+#define SRCT_ADDR_MASK 0x00000fffffffffff
+
+/* Destination with tlast (DSTT) descriptor format */
+#define DSTT_TYPE 9
+#define DSTT_LENGTH_SHIFT 44
+#define DSTT_LENGTH_MASK 0xffff
+#define DSTT_ADDR_SHIFT 0
+#define DSTT_ADDR_MASK 0x00000fffffffffff
+
+/* Immediate with tlast (IMMT) descriptor format */
+#define IMMT_TYPE 10
+#define IMMT_DATA_SHIFT 0
+#define IMMT_DATA_MASK 0x0fffffffffffffff
+
+/* Descriptor helper macros */
+#define DESC_DEC(_d, _s, _m) (((_d) >> (_s)) & (_m))
+#define DESC_ENC(_d, _v, _s, _m) \
+ do { \
+ (_d) &= ~((u64)(_m) << (_s)); \
+ (_d) |= (((u64)(_v) & (_m)) << (_s)); \
+ } while (0)
+
+u64 flexrm_read_desc(void *desc_ptr)
+{
+ return le64_to_cpu(*((u64 *)desc_ptr));
+}
+
+void flexrm_write_desc(void *desc_ptr, u64 desc)
+{
+ *((u64 *)desc_ptr) = cpu_to_le64(desc);
+}
+
+u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc)
+{
+ return (u32)(cmpl_desc & CMPL_OPAQUE_MASK);
+}
+
+int flexrm_cmpl_desc_to_error(u64 cmpl_desc)
+{
+ u32 status;
+
+ status = DESC_DEC(cmpl_desc, CMPL_DME_STATUS_SHIFT,
+ CMPL_DME_STATUS_MASK);
+ if (status & DME_STATUS_ERROR_MASK)
+ return -EIO;
+
+ status = DESC_DEC(cmpl_desc, CMPL_RM_STATUS_SHIFT,
+ CMPL_RM_STATUS_MASK);
+ status &= RM_STATUS_CODE_MASK;
+ if (status == RM_STATUS_CODE_AE_TIMEOUT)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+bool flexrm_is_next_table_desc(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+ u32 type = DESC_DEC(desc, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+
+ return (type == NPTR_TYPE) ? true : false;
+}
+
+u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NPTR_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NPTR_TOGGLE_SHIFT, NPTR_TOGGLE_MASK);
+ DESC_ENC(desc, next_addr, NPTR_ADDR_SHIFT, NPTR_ADDR_MASK);
+
+ return desc;
+}
+
+u64 flexrm_null_desc(u32 toggle)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, NULL_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, NULL_TOGGLE_SHIFT, NULL_TOGGLE_MASK);
+
+ return desc;
+}
+
+u32 flexrm_estimate_header_desc_count(u32 nhcnt)
+{
+ u32 hcnt = nhcnt / HEADER_BDCOUNT_MAX;
+
+ if (!(nhcnt % HEADER_BDCOUNT_MAX))
+ hcnt += 1;
+
+ return hcnt;
+}
+
+static void flexrm_flip_header_toogle(void *desc_ptr)
+{
+ u64 desc = flexrm_read_desc(desc_ptr);
+
+ if (desc & ((u64)0x1 << HEADER_TOGGLE_SHIFT))
+ desc &= ~((u64)0x1 << HEADER_TOGGLE_SHIFT);
+ else
+ desc |= ((u64)0x1 << HEADER_TOGGLE_SHIFT);
+
+ flexrm_write_desc(desc_ptr, desc);
+}
+
+static u64 flexrm_header_desc(u32 toggle, u32 startpkt, u32 endpkt,
+ u32 bdcount, u32 flags, u32 opaque)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, HEADER_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, toggle, HEADER_TOGGLE_SHIFT, HEADER_TOGGLE_MASK);
+ DESC_ENC(desc, startpkt, HEADER_STARTPKT_SHIFT, HEADER_STARTPKT_MASK);
+ DESC_ENC(desc, endpkt, HEADER_ENDPKT_SHIFT, HEADER_ENDPKT_MASK);
+ DESC_ENC(desc, bdcount, HEADER_BDCOUNT_SHIFT, HEADER_BDCOUNT_MASK);
+ DESC_ENC(desc, flags, HEADER_FLAGS_SHIFT, HEADER_FLAGS_MASK);
+ DESC_ENC(desc, opaque, HEADER_OPAQUE_SHIFT, HEADER_OPAQUE_MASK);
+
+ return desc;
+}
+
+static void flexrm_enqueue_desc(u32 nhpos, u32 nhcnt, u32 reqid,
+ u64 desc, void **desc_ptr, u32 *toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhavail, _toggle, _startpkt, _endpkt, _bdcount;
+
+ /* Sanity check */
+ if (nhcnt <= nhpos)
+ return;
+
+ /*
+ * Each request or packet start with a HEADER descriptor followed
+ * by one or more non-HEADER descriptors (SRC, SRCT, MSRC, DST,
+ * DSTT, MDST, IMM, and IMMT). The number of non-HEADER descriptors
+ * following a HEADER descriptor is represented by BDCOUNT field
+ * of HEADER descriptor. The max value of BDCOUNT field is 31 which
+ * means we can only have 31 non-HEADER descriptors following one
+ * HEADER descriptor.
+ *
+ * In general use, number of non-HEADER descriptors can easily go
+ * beyond 31. To tackle this situation, we have packet (or request)
+ * extenstion bits (STARTPKT and ENDPKT) in the HEADER descriptor.
+ *
+ * To use packet extension, the first HEADER descriptor of request
+ * (or packet) will have STARTPKT=1 and ENDPKT=0. The intermediate
+ * HEADER descriptors will have STARTPKT=0 and ENDPKT=0. The last
+ * HEADER descriptor will have STARTPKT=0 and ENDPKT=1. Also, the
+ * TOGGLE bit of the first HEADER will be set to invalid state to
+ * ensure that FlexRM does not start fetching descriptors till all
+ * descriptors are enqueued. The user of this function will flip
+ * the TOGGLE bit of first HEADER after all descriptors are
+ * enqueued.
+ */
+
+ if ((nhpos % HEADER_BDCOUNT_MAX == 0) && (nhcnt - nhpos)) {
+ /* Prepare the header descriptor */
+ nhavail = (nhcnt - nhpos);
+ _toggle = (nhpos == 0) ? !(*toggle) : (*toggle);
+ _startpkt = (nhpos == 0) ? 0x1 : 0x0;
+ _endpkt = (nhavail <= HEADER_BDCOUNT_MAX) ? 0x1 : 0x0;
+ _bdcount = (nhavail <= HEADER_BDCOUNT_MAX) ?
+ nhavail : HEADER_BDCOUNT_MAX;
+ if (nhavail <= HEADER_BDCOUNT_MAX)
+ _bdcount = nhavail;
+ else
+ _bdcount = HEADER_BDCOUNT_MAX;
+ d = flexrm_header_desc(_toggle, _startpkt, _endpkt,
+ _bdcount, 0x0, reqid);
+
+ /* Write header descriptor */
+ flexrm_write_desc(*desc_ptr, d);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+ }
+
+ /* Write desired descriptor */
+ flexrm_write_desc(*desc_ptr, desc);
+
+ /* Point to next descriptor */
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+
+ /* Skip next pointer descriptors */
+ while (flexrm_is_next_table_desc(*desc_ptr)) {
+ *toggle = (*toggle) ? 0 : 1;
+ *desc_ptr += sizeof(desc);
+ if (*desc_ptr == end_desc)
+ *desc_ptr = start_desc;
+ }
+}
+
+static u64 flexrm_src_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRC_LENGTH_SHIFT, SRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRC_ADDR_SHIFT, SRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_msrc_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MSRC_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MSRC_LENGTH_SHIFT, MSRC_LENGTH_MASK);
+ DESC_ENC(desc, addr, MSRC_ADDR_SHIFT, MSRC_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dst_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DST_LENGTH_SHIFT, DST_LENGTH_MASK);
+ DESC_ENC(desc, addr, DST_ADDR_SHIFT, DST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_mdst_desc(dma_addr_t addr, unsigned int length_div_16)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, MDST_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length_div_16, MDST_LENGTH_SHIFT, MDST_LENGTH_MASK);
+ DESC_ENC(desc, addr, MDST_ADDR_SHIFT, MDST_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_imm_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMM_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMM_DATA_SHIFT, IMM_DATA_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_srct_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, SRCT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, SRCT_LENGTH_SHIFT, SRCT_LENGTH_MASK);
+ DESC_ENC(desc, addr, SRCT_ADDR_SHIFT, SRCT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_dstt_desc(dma_addr_t addr, unsigned int length)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, DSTT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, length, DSTT_LENGTH_SHIFT, DSTT_LENGTH_MASK);
+ DESC_ENC(desc, addr, DSTT_ADDR_SHIFT, DSTT_ADDR_MASK);
+
+ return desc;
+}
+
+static u64 flexrm_immt_desc(u64 data)
+{
+ u64 desc = 0;
+
+ DESC_ENC(desc, IMMT_TYPE, DESC_TYPE_SHIFT, DESC_TYPE_MASK);
+ DESC_ENC(desc, data, IMMT_DATA_SHIFT, IMMT_DATA_MASK);
+
+ return desc;
+}
+
+static bool flexrm_spu_sanity_check(struct brcm_message *msg)
+{
+ struct scatterlist *sg;
+
+ if (!msg->spu.src || !msg->spu.dst)
+ return false;
+ for (sg = msg->spu.src; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > SRC_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MSRC_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+ for (sg = msg->spu.dst; sg; sg = sg_next(sg)) {
+ if (sg->length & 0xf) {
+ if (sg->length > DST_LENGTH_MASK)
+ return false;
+ } else {
+ if (sg->length > (MDST_LENGTH_MASK * 16))
+ return false;
+ }
+ }
+
+ return true;
+}
+
+static u32 flexrm_spu_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 cnt = 0;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ cnt++;
+ dst_target = src_sg->length;
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ cnt++;
+ if (dst_sg->length < dst_target)
+ dst_target -= dst_sg->length;
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ return cnt;
+}
+
+static int flexrm_spu_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ int rc;
+
+ rc = dma_map_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ if (rc < 0)
+ return rc;
+
+ rc = dma_map_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ if (rc < 0) {
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void flexrm_spu_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ dma_unmap_sg(dev, msg->spu.dst, sg_nents(msg->spu.dst),
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, msg->spu.src, sg_nents(msg->spu.src),
+ DMA_TO_DEVICE);
+}
+
+static void *flexrm_spu_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 nhpos = 0;
+ void *orig_desc_ptr = desc_ptr;
+ unsigned int dst_target = 0;
+ struct scatterlist *src_sg = msg->spu.src, *dst_sg = msg->spu.dst;
+
+ while (src_sg || dst_sg) {
+ if (src_sg) {
+ if (sg_dma_len(src_sg) & 0xf)
+ d = flexrm_src_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg));
+ else
+ d = flexrm_msrc_desc(sg_dma_address(src_sg),
+ sg_dma_len(src_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ dst_target = sg_dma_len(src_sg);
+ src_sg = sg_next(src_sg);
+ } else
+ dst_target = UINT_MAX;
+
+ while (dst_target && dst_sg) {
+ if (sg_dma_len(dst_sg) & 0xf)
+ d = flexrm_dst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg));
+ else
+ d = flexrm_mdst_desc(sg_dma_address(dst_sg),
+ sg_dma_len(dst_sg)/16);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ if (sg_dma_len(dst_sg) < dst_target)
+ dst_target -= sg_dma_len(dst_sg);
+ else
+ dst_target = 0;
+ dst_sg = sg_next(dst_sg);
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+static bool flexrm_sba_sanity_check(struct brcm_message *msg)
+{
+ u32 i;
+
+ if (!msg->sba.cmds || !msg->sba.cmds_count)
+ return false;
+
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ if (((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C)) &&
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C) &&
+ (msg->sba.cmds[i].data_len > SRCT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (msg->sba.cmds[i].resp_len > DSTT_LENGTH_MASK))
+ return false;
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT) &&
+ (msg->sba.cmds[i].data_len > DSTT_LENGTH_MASK))
+ return false;
+ }
+
+ return true;
+}
+
+static u32 flexrm_sba_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ u32 i, cnt;
+
+ cnt = 0;
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ cnt++;
+
+ if ((msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_B) ||
+ (msg->sba.cmds[i].flags & BRCM_SBA_CMD_TYPE_C))
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_RESP)
+ cnt++;
+
+ if (msg->sba.cmds[i].flags & BRCM_SBA_CMD_HAS_OUTPUT)
+ cnt++;
+ }
+
+ return cnt;
+}
+
+static void *flexrm_sba_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ u64 d;
+ u32 i, nhpos = 0;
+ struct brcm_sba_command *c;
+ void *orig_desc_ptr = desc_ptr;
+
+ /* Convert SBA commands into descriptors */
+ for (i = 0; i < msg->sba.cmds_count; i++) {
+ c = &msg->sba.cmds[i];
+
+ if ((c->flags & BRCM_SBA_CMD_HAS_RESP) &&
+ (c->flags & BRCM_SBA_CMD_HAS_OUTPUT)) {
+ /* Destination response descriptor */
+ d = flexrm_dst_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else if (c->flags & BRCM_SBA_CMD_HAS_RESP) {
+ /* Destination response with tlast descriptor */
+ d = flexrm_dstt_desc(c->resp, c->resp_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_HAS_OUTPUT) {
+ /* Destination with tlast descriptor */
+ d = flexrm_dstt_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if (c->flags & BRCM_SBA_CMD_TYPE_B) {
+ /* Command as immediate descriptor */
+ d = flexrm_imm_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ } else {
+ /* Command as immediate descriptor with tlast */
+ d = flexrm_immt_desc(c->cmd);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+
+ if ((c->flags & BRCM_SBA_CMD_TYPE_B) ||
+ (c->flags & BRCM_SBA_CMD_TYPE_C)) {
+ /* Source with tlast descriptor */
+ d = flexrm_srct_desc(c->data, c->data_len);
+ flexrm_enqueue_desc(nhpos, nhcnt, reqid,
+ d, &desc_ptr, &toggle,
+ start_desc, end_desc);
+ nhpos++;
+ }
+ }
+
+ /* Null descriptor with invalid toggle bit */
+ flexrm_write_desc(desc_ptr, flexrm_null_desc(!toggle));
+
+ /* Ensure that descriptors have been written to memory */
+ wmb();
+
+ /* Flip toggle bit in header */
+ flexrm_flip_header_toogle(orig_desc_ptr);
+
+ return desc_ptr;
+}
+
+bool flexrm_sanity_check(struct brcm_message *msg)
+{
+ if (!msg)
+ return false;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_sanity_check(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_sanity_check(msg);
+ default:
+ return false;
+ };
+}
+
+u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg)
+{
+ if (!msg)
+ return 0;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_estimate_nonheader_desc_count(msg);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_estimate_nonheader_desc_count(msg);
+ default:
+ return 0;
+ };
+}
+
+int flexrm_dma_map(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return -EINVAL;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_dma_map(dev, msg);
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg)
+{
+ if (!dev || !msg)
+ return;
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ flexrm_spu_dma_unmap(dev, msg);
+ break;
+ default:
+ break;
+ }
+}
+
+void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc)
+{
+ if (!msg || !desc_ptr || !start_desc || !end_desc)
+ return ERR_PTR(-ENOTSUPP);
+
+ if ((desc_ptr < start_desc) || (end_desc <= desc_ptr))
+ return ERR_PTR(-ERANGE);
+
+ switch (msg->type) {
+ case BRCM_MESSAGE_SPU:
+ return flexrm_spu_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ case BRCM_MESSAGE_SBA:
+ return flexrm_sba_write_descs(msg, nhcnt, reqid,
+ desc_ptr, toggle,
+ start_desc, end_desc);
+ default:
+ return ERR_PTR(-ENOTSUPP);
+ };
+}
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-desc.h b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
new file mode 100644
index 0000000..a95cf61
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-desc.h
@@ -0,0 +1,47 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * FlexRM descriptor library
+ */
+
+#ifndef __FLEXRM_DESC_H__
+#define __FLEXRM_DESC_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mailbox/brcm-message.h>
+
+extern u64 flexrm_read_desc(void *desc_ptr);
+
+extern void flexrm_write_desc(void *desc_ptr, u64 desc);
+
+extern u32 flexrm_cmpl_desc_to_reqid(u64 cmpl_desc);
+
+extern int flexrm_cmpl_desc_to_error(u64 cmpl_desc);
+
+extern bool flexrm_is_next_table_desc(void *desc_ptr);
+
+extern u64 flexrm_next_table_desc(u32 toggle, dma_addr_t next_addr);
+
+extern u64 flexrm_null_desc(u32 toogle);
+
+extern u32 flexrm_estimate_header_desc_count(u32 nhcnt);
+
+extern bool flexrm_sanity_check(struct brcm_message *msg);
+
+extern u32 flexrm_estimate_nonheader_desc_count(struct brcm_message *msg);
+
+extern int flexrm_dma_map(struct device *dev, struct brcm_message *msg);
+
+extern void flexrm_dma_unmap(struct device *dev, struct brcm_message *msg);
+
+extern void *flexrm_write_descs(struct brcm_message *msg, u32 nhcnt,
+ u32 reqid, void *desc_ptr, u32 toggle,
+ void *start_desc, void *end_desc);
+
+#endif /* __FLEXRM_DESC_H__ */
diff --git a/drivers/mailbox/mailbox-flexrm/flexrm-main.c b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
new file mode 100644
index 0000000..c8890f1
--- /dev/null
+++ b/drivers/mailbox/mailbox-flexrm/flexrm-main.c
@@ -0,0 +1,829 @@
+/* Broadcom FlexRM Mailbox Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Each Broadcom FlexSparx4 offload engine is implemented as an
+ * extension to Broadcom FlexRM ring manager. The FlexRM ring
+ * manager provides a set of rings which can be used to submit
+ * work to a FlexSparx4 offload engine.
+ *
+ * This driver creates a mailbox controller using a set of FlexRM
+ * rings where each mailbox channel represents a separate FlexRM ring.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/brcm-message.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "flexrm-desc.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE 0x10000
+#define RING_DESC_SIZE 8
+#define RING_DESC_INDEX(offset) \
+ ((offset) / RING_DESC_SIZE)
+#define RING_DESC_OFFSET(index) \
+ ((index) * RING_DESC_SIZE)
+#define RING_MAX_REQ_COUNT 1024
+#define RING_BD_ALIGN_ORDER 12
+#define RING_BD_ALIGN_CHECK(addr) \
+ (!((addr) & ((0x1 << RING_BD_ALIGN_ORDER) - 1)))
+#define RING_BD_TOGGLE_INVALID(offset) \
+ (((offset) >> RING_BD_ALIGN_ORDER) & 0x1)
+#define RING_BD_TOGGLE_VALID(offset) \
+ (!RING_BD_TOGGLE_INVALID(offset))
+#define RING_BD_DESC_PER_REQ 32
+#define RING_BD_DESC_COUNT \
+ (RING_MAX_REQ_COUNT * RING_BD_DESC_PER_REQ)
+#define RING_BD_SIZE \
+ (RING_BD_DESC_COUNT * RING_DESC_SIZE)
+#define RING_CMPL_ALIGN_ORDER 13
+#define RING_CMPL_DESC_COUNT RING_MAX_REQ_COUNT
+#define RING_CMPL_SIZE \
+ (RING_CMPL_DESC_COUNT * RING_DESC_SIZE)
+#define RING_VER_MAGIC 0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER 0x000
+#define RING_BD_START_ADDR 0x004
+#define RING_BD_READ_PTR 0x008
+#define RING_BD_WRITE_PTR 0x00c
+#define RING_BD_READ_PTR_DDR_LS 0x010
+#define RING_BD_READ_PTR_DDR_MS 0x014
+#define RING_CMPL_START_ADDR 0x018
+#define RING_CMPL_WRITE_PTR 0x01c
+#define RING_NUM_REQ_RECV_LS 0x020
+#define RING_NUM_REQ_RECV_MS 0x024
+#define RING_NUM_REQ_TRANS_LS 0x028
+#define RING_NUM_REQ_TRANS_MS 0x02c
+#define RING_NUM_REQ_OUTSTAND 0x030
+#define RING_CONTROL 0x034
+#define RING_FLUSH_DONE 0x038
+#define RING_MSI_ADDR_LS 0x03c
+#define RING_MSI_ADDR_MS 0x040
+#define RING_MSI_CONTROL 0x048
+#define RING_BD_READ_PTR_DDR_CONTROL 0x04c
+#define RING_MSI_DATA_VALUE 0x064
+
+/* Register RING_BD_START_ADDR fields */
+#define BD_LAST_UPDATE_HW_SHIFT 28
+#define BD_LAST_UPDATE_HW_MASK 0x1
+#define BD_START_ADDR_VALUE(pa) \
+ ((u32)((((dma_addr_t)(pa)) >> RING_BD_ALIGN_ORDER) & 0x0fffffff))
+#define BD_START_ADDR_DECODE(val) \
+ ((dma_addr_t)((val) & 0x0fffffff) << RING_BD_ALIGN_ORDER)
+
+/* Register RING_CMPL_START_ADDR fields */
+#define CMPL_START_ADDR_VALUE(pa) \
+ ((u32)((((u64)(pa)) >> RING_CMPL_ALIGN_ORDER) & 0x03ffffff))
+
+/* Register RING_CONTROL fields */
+#define CONTROL_MASK_DISABLE_CONTROL 12
+#define CONTROL_FLUSH_SHIFT 5
+#define CONTROL_ACTIVE_SHIFT 4
+#define CONTROL_RATE_ADAPT_MASK 0xf
+#define CONTROL_RATE_DYNAMIC 0x0
+#define CONTROL_RATE_FAST 0x8
+#define CONTROL_RATE_MEDIUM 0x9
+#define CONTROL_RATE_SLOW 0xa
+#define CONTROL_RATE_IDLE 0xb
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK 0x1
+
+/* Register RING_MSI_CONTROL fields */
+#define MSI_TIMER_VAL_SHIFT 16
+#define MSI_TIMER_VAL_MASK 0xffff
+#define MSI_ENABLE_SHIFT 15
+#define MSI_ENABLE_MASK 0x1
+#define MSI_COUNT_SHIFT 0
+#define MSI_COUNT_MASK 0x3ff
+
+/* Register RING_BD_READ_PTR_DDR_CONTROL fields */
+#define BD_READ_PTR_DDR_TIMER_VAL_SHIFT 16
+#define BD_READ_PTR_DDR_TIMER_VAL_MASK 0xffff
+#define BD_READ_PTR_DDR_ENABLE_SHIFT 15
+#define BD_READ_PTR_DDR_ENABLE_MASK 0x1
+
+struct flexrm_ring {
+ /* Unprotected members */
+ int num;
+ struct flexrm_mbox *mbox;
+ void __iomem *regs;
+ bool irq_requested;
+ unsigned int irq;
+ unsigned int msi_timer_val;
+ unsigned int msi_count_threshold;
+ struct ida requests_ida;
+ struct brcm_message *requests[RING_MAX_REQ_COUNT];
+ void *bd_base;
+ dma_addr_t bd_dma_base;
+ u32 bd_write_offset;
+ void *cmpl_base;
+ dma_addr_t cmpl_dma_base;
+ /* Protected members */
+ spinlock_t lock;
+ struct brcm_message *last_pending_msg;
+ u32 cmpl_read_offset;
+};
+
+struct flexrm_mbox {
+ struct device *dev;
+ void __iomem *regs;
+ u32 num_rings;
+ struct flexrm_ring *rings;
+ u64 dma_mask;
+ struct dma_pool *bd_pool;
+ struct dma_pool *cmpl_pool;
+ struct mbox_controller controller;
+};
+
+static int flexrm_new_request(struct flexrm_ring *ring,
+ struct brcm_message *batch_msg,
+ struct brcm_message *msg)
+{
+ void *next;
+ unsigned long flags;
+ u32 val, count, nhcnt;
+ u32 read_offset, write_offset;
+ bool exit_cleanup = false;
+ int ret = 0, reqid;
+
+ /* Do sanity check on message */
+ if (!flexrm_sanity_check(msg))
+ return -EIO;
+ msg->error = 0;
+
+ /* If no requests possible then save data pointer and goto done. */
+ reqid = ida_simple_get(&ring->requests_ida, 0,
+ RING_MAX_REQ_COUNT, GFP_KERNEL);
+ if (reqid < 0) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ return 0;
+ }
+ ring->requests[reqid] = msg;
+
+ /* Do DMA mappings for the message */
+ ret = flexrm_dma_map(ring->mbox->dev, msg);
+ if (ret < 0) {
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ return ret;
+ }
+
+ /* If last_pending_msg is already set then goto done with error */
+ spin_lock_irqsave(&ring->lock, flags);
+ if (ring->last_pending_msg)
+ ret = -ENOSPC;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ if (ret < 0) {
+ dev_warn(ring->mbox->dev, "no space in ring %d\n", ring->num);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Determine current HW BD read offset */
+ read_offset = readl_relaxed(ring->regs + RING_BD_READ_PTR);
+ val = readl_relaxed(ring->regs + RING_BD_START_ADDR);
+ read_offset *= RING_DESC_SIZE;
+ read_offset += (u32)(BD_START_ADDR_DECODE(val) - ring->bd_dma_base);
+
+ /*
+ * Number required descriptors = number of non-header descriptors +
+ * number of header descriptors +
+ * 1x null descriptor
+ */
+ nhcnt = flexrm_estimate_nonheader_desc_count(msg);
+ count = flexrm_estimate_header_desc_count(nhcnt) + nhcnt + 1;
+
+ /* Check for available descriptor space. */
+ write_offset = ring->bd_write_offset;
+ while (count) {
+ if (!flexrm_is_next_table_desc(ring->bd_base + write_offset))
+ count--;
+ write_offset += RING_DESC_SIZE;
+ if (write_offset == RING_BD_SIZE)
+ write_offset = 0x0;
+ if (write_offset == read_offset)
+ break;
+ }
+ if (count) {
+ spin_lock_irqsave(&ring->lock, flags);
+ if (batch_msg)
+ ring->last_pending_msg = batch_msg;
+ else
+ ring->last_pending_msg = msg;
+ spin_unlock_irqrestore(&ring->lock, flags);
+ ret = 0;
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Write descriptors to ring */
+ next = flexrm_write_descs(msg, nhcnt, reqid,
+ ring->bd_base + ring->bd_write_offset,
+ RING_BD_TOGGLE_VALID(ring->bd_write_offset),
+ ring->bd_base, ring->bd_base + RING_BD_SIZE);
+ if (IS_ERR(next)) {
+ ret = PTR_ERR(next);
+ exit_cleanup = true;
+ goto exit;
+ }
+
+ /* Save ring BD write offset */
+ ring->bd_write_offset = (unsigned long)(next - ring->bd_base);
+
+exit:
+ /* Update error status in message */
+ msg->error = ret;
+
+ /* Cleanup if we failed */
+ if (exit_cleanup) {
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+ }
+
+ return ret;
+}
+
+static int flexrm_process_completions(struct flexrm_ring *ring)
+{
+ u64 desc;
+ int err, count = 0;
+ unsigned long flags;
+ struct brcm_message *msg = NULL;
+ u32 reqid, cmpl_read_offset, cmpl_write_offset;
+ struct mbox_chan *chan = &ring->mbox->controller.chans[ring->num];
+
+ spin_lock_irqsave(&ring->lock, flags);
+
+ /* Check last_pending_msg */
+ if (ring->last_pending_msg) {
+ msg = ring->last_pending_msg;
+ ring->last_pending_msg = NULL;
+ }
+
+ /*
+ * Get current completion read and write offset
+ *
+ * Note: We should read completion write pointer atleast once
+ * after we get a MSI interrupt because HW maintains internal
+ * MSI status which will allow next MSI interrupt only after
+ * completion write pointer is read.
+ */
+ cmpl_write_offset = readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ cmpl_write_offset *= RING_DESC_SIZE;
+ cmpl_read_offset = ring->cmpl_read_offset;
+ ring->cmpl_read_offset = cmpl_write_offset;
+
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ /* If last_pending_msg was set then queue it back */
+ if (msg)
+ mbox_send_message(chan, msg);
+
+ /* For each completed request notify mailbox clients */
+ reqid = 0;
+ while (cmpl_read_offset != cmpl_write_offset) {
+ /* Dequeue next completion descriptor */
+ desc = *((u64 *)(ring->cmpl_base + cmpl_read_offset));
+
+ /* Next read offset */
+ cmpl_read_offset += RING_DESC_SIZE;
+ if (cmpl_read_offset == RING_CMPL_SIZE)
+ cmpl_read_offset = 0;
+
+ /* Decode error from completion descriptor */
+ err = flexrm_cmpl_desc_to_error(desc);
+ if (err < 0) {
+ dev_warn(ring->mbox->dev,
+ "got completion desc=0x%lx with error %d",
+ (unsigned long)desc, err);
+ }
+
+ /* Determine request id from completion descriptor */
+ reqid = flexrm_cmpl_desc_to_reqid(desc);
+
+ /* Determine message pointer based on reqid */
+ msg = ring->requests[reqid];
+ if (!msg) {
+ dev_warn(ring->mbox->dev,
+ "null msg pointer for completion desc=0x%lx",
+ (unsigned long)desc);
+ continue;
+ }
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = err;
+ mbox_chan_received_data(chan, msg);
+
+ /* Increment number of completions processed */
+ count++;
+ }
+
+ return count;
+}
+
+static irqreturn_t flexrm_irq_event(int irq, void *dev_id)
+{
+ /* We only have MSI for completions so just wakeup IRQ thread */
+ /* Ring related errors will be informed via completion descriptors */
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t flexrm_irq_thread(int irq, void *dev_id)
+{
+ flexrm_process_completions(dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int flexrm_send_data(struct mbox_chan *chan, void *data)
+{
+ int i, rc;
+ struct flexrm_ring *ring = chan->con_priv;
+ struct brcm_message *msg = data;
+
+ if (msg->type == BRCM_MESSAGE_BATCH) {
+ for (i = msg->batch.msgs_queued;
+ i < msg->batch.msgs_count; i++) {
+ rc = flexrm_new_request(ring, msg,
+ &msg->batch.msgs[i]);
+ if (rc) {
+ msg->error = rc;
+ return rc;
+ }
+ msg->batch.msgs_queued++;
+ }
+ return 0;
+ }
+
+ return flexrm_new_request(ring, NULL, data);
+}
+
+static bool flexrm_peek_data(struct mbox_chan *chan)
+{
+ int cnt = flexrm_process_completions(chan->con_priv);
+
+ return (cnt > 0) ? true : false;
+}
+
+static int flexrm_startup(struct mbox_chan *chan)
+{
+ u64 d;
+ u32 val, off;
+ int ret = 0;
+ dma_addr_t next_addr;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Allocate BD memory */
+ ring->bd_base = dma_pool_alloc(ring->mbox->bd_pool,
+ GFP_KERNEL, &ring->bd_dma_base);
+ if (!ring->bd_base) {
+ dev_err(ring->mbox->dev, "can't allocate BD memory\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Configure next table pointer entries in BD memory */
+ for (off = 0; off < RING_BD_SIZE; off += RING_DESC_SIZE) {
+ next_addr = off + RING_DESC_SIZE;
+ if (next_addr == RING_BD_SIZE)
+ next_addr = 0;
+ next_addr += ring->bd_dma_base;
+ if (RING_BD_ALIGN_CHECK(next_addr))
+ d = flexrm_next_table_desc(RING_BD_TOGGLE_VALID(off),
+ next_addr);
+ else
+ d = flexrm_null_desc(RING_BD_TOGGLE_INVALID(off));
+ flexrm_write_desc(ring->bd_base + off, d);
+ }
+
+ /* Allocate completion memory */
+ ring->cmpl_base = dma_pool_alloc(ring->mbox->cmpl_pool,
+ GFP_KERNEL, &ring->cmpl_dma_base);
+ if (!ring->cmpl_base) {
+ dev_err(ring->mbox->dev, "can't allocate completion memory\n");
+ ret = -ENOMEM;
+ goto fail_free_bd_memory;
+ }
+ memset(ring->cmpl_base, 0, RING_CMPL_SIZE);
+
+ /* Request IRQ */
+ if (ring->irq == UINT_MAX) {
+ dev_err(ring->mbox->dev, "ring IRQ not available\n");
+ ret = -ENODEV;
+ goto fail_free_cmpl_memory;
+ }
+ ret = request_threaded_irq(ring->irq,
+ flexrm_irq_event,
+ flexrm_irq_thread,
+ 0, dev_name(ring->mbox->dev), ring);
+ if (ret) {
+ dev_err(ring->mbox->dev, "failed to request ring IRQ\n");
+ goto fail_free_cmpl_memory;
+ }
+ ring->irq_requested = true;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Program BD start address */
+ val = BD_START_ADDR_VALUE(ring->bd_dma_base);
+ writel_relaxed(val, ring->regs + RING_BD_START_ADDR);
+
+ /* BD write pointer will be same as HW write pointer */
+ ring->bd_write_offset =
+ readl_relaxed(ring->regs + RING_BD_WRITE_PTR);
+ ring->bd_write_offset *= RING_DESC_SIZE;
+
+ /* Program completion start address */
+ val = CMPL_START_ADDR_VALUE(ring->cmpl_dma_base);
+ writel_relaxed(val, ring->regs + RING_CMPL_START_ADDR);
+
+ /* Ensure last pending message is cleared */
+ ring->last_pending_msg = NULL;
+
+ /* Completion read pointer will be same as HW write pointer */
+ ring->cmpl_read_offset =
+ readl_relaxed(ring->regs + RING_CMPL_WRITE_PTR);
+ ring->cmpl_read_offset *= RING_DESC_SIZE;
+
+ /* Read ring Tx, Rx, and Outstanding counts to clear */
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_RECV_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_LS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_TRANS_MS);
+ readl_relaxed(ring->regs + RING_NUM_REQ_OUTSTAND);
+
+ /* Configure RING_MSI_CONTROL */
+ val = 0;
+ val |= (ring->msi_timer_val << MSI_TIMER_VAL_SHIFT);
+ val |= BIT(MSI_ENABLE_SHIFT);
+ val |= (ring->msi_count_threshold & MSI_COUNT_MASK) << MSI_COUNT_SHIFT;
+ writel_relaxed(val, ring->regs + RING_MSI_CONTROL);
+
+ /* Enable/activate ring */
+ val = BIT(CONTROL_ACTIVE_SHIFT);
+ writel_relaxed(val, ring->regs + RING_CONTROL);
+
+ return 0;
+
+fail_free_cmpl_memory:
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+fail_free_bd_memory:
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+fail:
+ return ret;
+}
+
+static void flexrm_shutdown(struct mbox_chan *chan)
+{
+ u32 reqid;
+ unsigned int timeout;
+ struct brcm_message *msg;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ /* Disable/inactivate ring */
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
+
+ /* Flush ring with timeout of 1s */
+ timeout = 1000;
+ writel_relaxed(BIT(CONTROL_FLUSH_SHIFT),
+ ring->regs + RING_CONTROL);
+ do {
+ if (readl_relaxed(ring->regs + RING_FLUSH_DONE) &
+ FLUSH_DONE_MASK)
+ break;
+ mdelay(1);
+ } while (timeout--);
+
+ /* Abort all in-flight requests */
+ for (reqid = 0; reqid < RING_MAX_REQ_COUNT; reqid++) {
+ msg = ring->requests[reqid];
+ if (!msg)
+ continue;
+
+ /* Release reqid for recycling */
+ ring->requests[reqid] = NULL;
+ ida_simple_remove(&ring->requests_ida, reqid);
+
+ /* Unmap DMA mappings */
+ flexrm_dma_unmap(ring->mbox->dev, msg);
+
+ /* Give-back message to mailbox client */
+ msg->error = -EIO;
+ mbox_chan_received_data(chan, msg);
+ }
+
+ /* Release IRQ */
+ if (ring->irq_requested) {
+ free_irq(ring->irq, ring);
+ ring->irq_requested = false;
+ }
+
+ /* Free-up completion descriptor ring */
+ if (ring->cmpl_base) {
+ dma_pool_free(ring->mbox->cmpl_pool,
+ ring->cmpl_base, ring->cmpl_dma_base);
+ ring->cmpl_base = NULL;
+ }
+
+ /* Free-up BD descriptor ring */
+ if (ring->bd_base) {
+ dma_pool_free(ring->mbox->bd_pool,
+ ring->bd_base, ring->bd_dma_base);
+ ring->bd_base = NULL;
+ }
+}
+
+static bool flexrm_last_tx_done(struct mbox_chan *chan)
+{
+ bool ret;
+ unsigned long flags;
+ struct flexrm_ring *ring = chan->con_priv;
+
+ spin_lock_irqsave(&ring->lock, flags);
+ ret = (ring->last_pending_msg) ? false : true;
+ spin_unlock_irqrestore(&ring->lock, flags);
+
+ return ret;
+}
+
+static const struct mbox_chan_ops flexrm_mbox_chan_ops = {
+ .send_data = flexrm_send_data,
+ .startup = flexrm_startup,
+ .shutdown = flexrm_shutdown,
+ .last_tx_done = flexrm_last_tx_done,
+ .peek_data = flexrm_peek_data,
+};
+
+static void flexrm_mbox_msi_write(struct msi_desc *desc, struct msi_msg *msg)
+{
+ struct device *dev = msi_desc_to_dev(desc);
+ struct flexrm_mbox *mbox = dev_get_drvdata(dev);
+ struct flexrm_ring *ring = &mbox->rings[desc->platform.msi_index];
+
+ /* Configure per-Ring MSI registers */
+ writel_relaxed(msg->address_lo, ring->regs + RING_MSI_ADDR_LS);
+ writel_relaxed(msg->address_hi, ring->regs + RING_MSI_ADDR_MS);
+ writel_relaxed(msg->data, ring->regs + RING_MSI_DATA_VALUE);
+}
+
+static struct mbox_chan *flexrm_mbox_of_xlate(struct mbox_controller *cntlr,
+ const struct of_phandle_args *pa)
+{
+ struct mbox_chan *chan;
+ struct flexrm_ring *ring;
+
+ if (pa->args_count < 3)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[0] >= cntlr->num_chans)
+ return ERR_PTR(-ENOENT);
+
+ if (pa->args[1] > MSI_COUNT_MASK)
+ return ERR_PTR(-EINVAL);
+
+ if (pa->args[2] > MSI_TIMER_VAL_MASK)
+ return ERR_PTR(-EINVAL);
+
+ chan = &cntlr->chans[pa->args[0]];
+ ring = chan->con_priv;
+ ring->msi_count_threshold = pa->args[1];
+ ring->msi_timer_val = pa->args[2];
+
+ return chan;
+}
+
+static int flexrm_mbox_probe(struct platform_device *pdev)
+{
+ int index, ret = 0;
+ void __iomem *regs;
+ void __iomem *regs_end;
+ struct msi_desc *desc;
+ struct resource *iomem;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox;
+ struct device *dev = &pdev->dev;
+
+ /* Allocate driver mailbox struct */
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->dev = dev;
+ platform_set_drvdata(pdev, mbox);
+
+ /* Get resource for registers */
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem || (resource_size(iomem) < RING_REGS_SIZE)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Map registers of all rings */
+ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(mbox->regs)) {
+ ret = PTR_ERR(mbox->regs);
+ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret);
+ goto fail;
+ }
+ regs_end = mbox->regs + resource_size(iomem);
+
+ /* Scan and count available rings */
+ mbox->num_rings = 0;
+ for (regs = mbox->regs; regs < regs_end; regs += RING_REGS_SIZE) {
+ if (readl_relaxed(regs + RING_VER) == RING_VER_MAGIC)
+ mbox->num_rings++;
+ }
+ if (!mbox->num_rings) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* Allocate driver ring structs */
+ ring = devm_kcalloc(dev, mbox->num_rings, sizeof(*ring), GFP_KERNEL);
+ if (!ring) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ mbox->rings = ring;
+
+ /* Initialize members of driver ring structs */
+ regs = mbox->regs;
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ring->num = index;
+ ring->mbox = mbox;
+ while ((regs < regs_end) &&
+ (readl_relaxed(regs + RING_VER) != RING_VER_MAGIC))
+ regs += RING_REGS_SIZE;
+ if (regs_end <= regs) {
+ ret = -ENODEV;
+ goto fail;
+ }
+ ring->regs = regs;
+ regs += RING_REGS_SIZE;
+ ring->irq = UINT_MAX;
+ ring->irq_requested = false;
+ ring->msi_timer_val = MSI_TIMER_VAL_MASK;
+ ring->msi_count_threshold = 0x1;
+ ida_init(&ring->requests_ida);
+ memset(ring->requests, 0, sizeof(ring->requests));
+ ring->bd_base = NULL;
+ ring->bd_dma_base = 0;
+ ring->cmpl_base = NULL;
+ ring->cmpl_dma_base = 0;
+ spin_lock_init(&ring->lock);
+ ring->last_pending_msg = NULL;
+ ring->cmpl_read_offset = 0;
+ }
+
+ /* FlexRM is capable of 40-bit physical addresses only */
+ mbox->dma_mask = DMA_BIT_MASK(40);
+ dev->dma_mask = &mbox->dma_mask;
+
+ /* Create DMA pool for ring BD memory */
+ mbox->bd_pool = dma_pool_create("bd", dev, RING_BD_SIZE,
+ 1 << RING_BD_ALIGN_ORDER, 0);
+ if (!mbox->bd_pool) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ /* Create DMA pool for ring completion memory */
+ mbox->cmpl_pool = dma_pool_create("cmpl", dev, RING_CMPL_SIZE,
+ 1 << RING_CMPL_ALIGN_ORDER, 0);
+ if (!mbox->cmpl_pool) {
+ ret = -ENOMEM;
+ goto fail_destroy_bd_pool;
+ }
+
+ /* Allocate platform MSIs for each ring */
+ ret = platform_msi_domain_alloc_irqs(dev, mbox->num_rings,
+ flexrm_mbox_msi_write);
+ if (ret)
+ goto fail_destroy_cmpl_pool;
+
+ /* Save alloced IRQ numbers for each ring */
+ for_each_msi_entry(desc, dev) {
+ ring = &mbox->rings[desc->platform.msi_index];
+ ring->irq = desc->irq;
+ }
+
+ /* Initialize mailbox controller */
+ mbox->controller.txdone_irq = false;
+ mbox->controller.txdone_poll = true;
+ mbox->controller.txpoll_period = 1;
+ mbox->controller.ops = &flexrm_mbox_chan_ops;
+ mbox->controller.dev = dev;
+ mbox->controller.num_chans = mbox->num_rings;
+ mbox->controller.of_xlate = flexrm_mbox_of_xlate;
+ mbox->controller.chans = devm_kcalloc(dev, mbox->num_rings,
+ sizeof(*mbox->controller.chans), GFP_KERNEL);
+ if (!mbox->controller.chans) {
+ ret = -ENOMEM;
+ goto fail_free_msis;
+ }
+ for (index = 0; index < mbox->num_rings; index++)
+ mbox->controller.chans[index].con_priv = &mbox->rings[index];
+
+ /* Register mailbox controller */
+ ret = mbox_controller_register(&mbox->controller);
+ if (ret)
+ goto fail_free_msis;
+
+ dev_info(dev, "registered flexrm mailbox with %d channels\n",
+ mbox->controller.num_chans);
+
+ return 0;
+
+fail_free_msis:
+ platform_msi_domain_free_irqs(dev);
+fail_destroy_cmpl_pool:
+ dma_pool_destroy(mbox->cmpl_pool);
+fail_destroy_bd_pool:
+ dma_pool_destroy(mbox->bd_pool);
+fail:
+ return ret;
+}
+
+static int flexrm_mbox_remove(struct platform_device *pdev)
+{
+ int index;
+ struct device *dev = &pdev->dev;
+ struct flexrm_ring *ring;
+ struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
+
+ mbox_controller_unregister(&mbox->controller);
+
+ platform_msi_domain_free_irqs(dev);
+
+ dma_pool_destroy(mbox->cmpl_pool);
+ dma_pool_destroy(mbox->bd_pool);
+
+ for (index = 0; index < mbox->num_rings; index++) {
+ ring = &mbox->rings[index];
+ ida_destroy(&ring->requests_ida);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id flexrm_mbox_of_match[] = {
+ { .compatible = "brcm,iproc-flexrm-mbox", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, flexrm_mbox_of_match);
+
+static struct platform_driver flexrm_mbox_driver = {
+ .driver = {
+ .name = "brcm-flexrm-mbox",
+ .of_match_table = flexrm_mbox_of_match,
+ },
+ .probe = flexrm_mbox_probe,
+ .remove = flexrm_mbox_remove,
+};
+module_platform_driver(flexrm_mbox_driver);
+
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom FlexRM mailbox driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mailbox/brcm-message.h b/include/linux/mailbox/brcm-message.h
index 6b55c93..c20b484 100644
--- a/include/linux/mailbox/brcm-message.h
+++ b/include/linux/mailbox/brcm-message.h
@@ -16,6 +16,7 @@
enum brcm_message_type {
BRCM_MESSAGE_UNKNOWN = 0,
+ BRCM_MESSAGE_BATCH,
BRCM_MESSAGE_SPU,
BRCM_MESSAGE_SBA,
BRCM_MESSAGE_MAX,
@@ -23,24 +24,29 @@ enum brcm_message_type {
struct brcm_sba_command {
u64 cmd;
+ u64 *cmd_dma;
+ dma_addr_t cmd_dma_addr;
#define BRCM_SBA_CMD_TYPE_A BIT(0)
#define BRCM_SBA_CMD_TYPE_B BIT(1)
#define BRCM_SBA_CMD_TYPE_C BIT(2)
#define BRCM_SBA_CMD_HAS_RESP BIT(3)
#define BRCM_SBA_CMD_HAS_OUTPUT BIT(4)
u64 flags;
- dma_addr_t input;
- size_t input_len;
dma_addr_t resp;
size_t resp_len;
- dma_addr_t output;
- size_t output_len;
+ dma_addr_t data;
+ size_t data_len;
};
struct brcm_message {
enum brcm_message_type type;
union {
struct {
+ struct brcm_message *msgs;
+ unsigned int msgs_queued;
+ unsigned int msgs_count;
+ } batch;
+ struct {
struct scatterlist *src;
struct scatterlist *dst;
} spu;
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: Jassi Brar, Rob Herring
Cc: Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR, Rob Rice,
devicetree, linux-kernel, linux-arm-kernel,
bcm-kernel-feedback-list, Anup Patel
This patch adds device tree bindings document for the FlexRM
ring manager found on Broadcom iProc SoCs.
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
.../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
new file mode 100644
index 0000000..ca51a39
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
@@ -0,0 +1,60 @@
+Broadcom FlexRM Ring Manager
+============================
+The Broadcom FlexRM ring manager provides a set of rings which can be
+used to submit work to offload engines. An SoC may have multiple FlexRM
+hardware blocks. There is one device tree entry per FlexRM block. The
+FlexRM driver will create a mailbox-controller instance for given FlexRM
+hardware block where each mailbox channel is a separate FlexRM ring.
+
+Required properties:
+--------------------
+- compatible: Should be "brcm,iproc-flexrm-mbox"
+- reg: Specifies base physical address and size of the FlexRM
+ ring registers
+- msi-parent: Phandles (and potential Device IDs) to MSI controllers
+ The FlexRM engine will send MSIs (instead of wired
+ interrupts) to CPU. There is one MSI for each FlexRM ring.
+ Refer devicetree/bindings/interrupt-controller/msi.txt
+- #mbox-cells: Specifies the number of cells needed to encode a mailbox
+ channel. This should be 3.
+
+ The 1st cell is the mailbox channel number.
+
+ The 2nd cell contains MSI completion threshold. This is the
+ number of completion messages for which FlexRM will inject
+ one MSI interrupt to CPU.
+
+ The 3nd cell contains MSI timer value representing time for
+ which FlexRM will wait to accumulate N completion messages
+ where N is the value specified by 2nd cell above. If FlexRM
+ does not get required number of completion messages in time
+ specified by this cell then it will inject one MSI interrupt
+ to CPU provided atleast one completion message is available.
+
+Optional properties:
+--------------------
+- dma-coherent: Present if DMA operations made by the FlexRM engine (such
+ as DMA descriptor access, access to buffers pointed by DMA
+ descriptors and read/write pointer updates to DDR) are
+ cache coherent with the CPU.
+
+Example:
+--------
+crypto_mbox: mbox@67000000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x67000000 0x200000>;
+ msi-parent = <&gic_its 0x7f00>;
+ #mbox-cells = <3>;
+};
+
+crypto_client {
+ ...
+ mboxes = <&crypto_mbox 0 0x1 0xffff>,
+ <&crypto_mbox 1 0x1 0xffff>,
+ <&crypto_mbox 16 0x1 0xffff>,
+ <&crypto_mbox 17 0x1 0xffff>,
+ <&crypto_mbox 30 0x1 0xffff>,
+ <&crypto_mbox 31 0x1 0xffff>;
+ };
+ ...
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: Jassi Brar, Rob Herring
Cc: Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR, Rob Rice,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Anup Patel
This patch adds device tree bindings document for the FlexRM
ring manager found on Broadcom iProc SoCs.
Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
.../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
new file mode 100644
index 0000000..ca51a39
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
@@ -0,0 +1,60 @@
+Broadcom FlexRM Ring Manager
+============================
+The Broadcom FlexRM ring manager provides a set of rings which can be
+used to submit work to offload engines. An SoC may have multiple FlexRM
+hardware blocks. There is one device tree entry per FlexRM block. The
+FlexRM driver will create a mailbox-controller instance for given FlexRM
+hardware block where each mailbox channel is a separate FlexRM ring.
+
+Required properties:
+--------------------
+- compatible: Should be "brcm,iproc-flexrm-mbox"
+- reg: Specifies base physical address and size of the FlexRM
+ ring registers
+- msi-parent: Phandles (and potential Device IDs) to MSI controllers
+ The FlexRM engine will send MSIs (instead of wired
+ interrupts) to CPU. There is one MSI for each FlexRM ring.
+ Refer devicetree/bindings/interrupt-controller/msi.txt
+- #mbox-cells: Specifies the number of cells needed to encode a mailbox
+ channel. This should be 3.
+
+ The 1st cell is the mailbox channel number.
+
+ The 2nd cell contains MSI completion threshold. This is the
+ number of completion messages for which FlexRM will inject
+ one MSI interrupt to CPU.
+
+ The 3nd cell contains MSI timer value representing time for
+ which FlexRM will wait to accumulate N completion messages
+ where N is the value specified by 2nd cell above. If FlexRM
+ does not get required number of completion messages in time
+ specified by this cell then it will inject one MSI interrupt
+ to CPU provided atleast one completion message is available.
+
+Optional properties:
+--------------------
+- dma-coherent: Present if DMA operations made by the FlexRM engine (such
+ as DMA descriptor access, access to buffers pointed by DMA
+ descriptors and read/write pointer updates to DDR) are
+ cache coherent with the CPU.
+
+Example:
+--------
+crypto_mbox: mbox@67000000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x67000000 0x200000>;
+ msi-parent = <&gic_its 0x7f00>;
+ #mbox-cells = <3>;
+};
+
+crypto_client {
+ ...
+ mboxes = <&crypto_mbox 0 0x1 0xffff>,
+ <&crypto_mbox 1 0x1 0xffff>,
+ <&crypto_mbox 16 0x1 0xffff>,
+ <&crypto_mbox 17 0x1 0xffff>,
+ <&crypto_mbox 30 0x1 0xffff>,
+ <&crypto_mbox 31 0x1 0xffff>;
+ };
+ ...
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-04 5:34 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-04 5:34 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds device tree bindings document for the FlexRM
ring manager found on Broadcom iProc SoCs.
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
.../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
new file mode 100644
index 0000000..ca51a39
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
@@ -0,0 +1,60 @@
+Broadcom FlexRM Ring Manager
+============================
+The Broadcom FlexRM ring manager provides a set of rings which can be
+used to submit work to offload engines. An SoC may have multiple FlexRM
+hardware blocks. There is one device tree entry per FlexRM block. The
+FlexRM driver will create a mailbox-controller instance for given FlexRM
+hardware block where each mailbox channel is a separate FlexRM ring.
+
+Required properties:
+--------------------
+- compatible: Should be "brcm,iproc-flexrm-mbox"
+- reg: Specifies base physical address and size of the FlexRM
+ ring registers
+- msi-parent: Phandles (and potential Device IDs) to MSI controllers
+ The FlexRM engine will send MSIs (instead of wired
+ interrupts) to CPU. There is one MSI for each FlexRM ring.
+ Refer devicetree/bindings/interrupt-controller/msi.txt
+- #mbox-cells: Specifies the number of cells needed to encode a mailbox
+ channel. This should be 3.
+
+ The 1st cell is the mailbox channel number.
+
+ The 2nd cell contains MSI completion threshold. This is the
+ number of completion messages for which FlexRM will inject
+ one MSI interrupt to CPU.
+
+ The 3nd cell contains MSI timer value representing time for
+ which FlexRM will wait to accumulate N completion messages
+ where N is the value specified by 2nd cell above. If FlexRM
+ does not get required number of completion messages in time
+ specified by this cell then it will inject one MSI interrupt
+ to CPU provided atleast one completion message is available.
+
+Optional properties:
+--------------------
+- dma-coherent: Present if DMA operations made by the FlexRM engine (such
+ as DMA descriptor access, access to buffers pointed by DMA
+ descriptors and read/write pointer updates to DDR) are
+ cache coherent with the CPU.
+
+Example:
+--------
+crypto_mbox: mbox at 67000000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x67000000 0x200000>;
+ msi-parent = <&gic_its 0x7f00>;
+ #mbox-cells = <3>;
+};
+
+crypto_client {
+ ...
+ mboxes = <&crypto_mbox 0 0x1 0xffff>,
+ <&crypto_mbox 1 0x1 0xffff>,
+ <&crypto_mbox 16 0x1 0xffff>,
+ <&crypto_mbox 17 0x1 0xffff>,
+ <&crypto_mbox 30 0x1 0xffff>,
+ <&crypto_mbox 31 0x1 0xffff>;
+ };
+ ...
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
2017-01-04 5:34 ` Anup Patel
@ 2017-01-04 14:37 ` Rob Herring
-1 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2017-01-04 14:37 UTC (permalink / raw)
To: Anup Patel
Cc: Jassi Brar, Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR,
Rob Rice, devicetree, linux-kernel, linux-arm-kernel,
bcm-kernel-feedback-list
On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
> This patch adds device tree bindings document for the FlexRM
> ring manager found on Broadcom iProc SoCs.
>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> ---
> .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>
> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> new file mode 100644
> index 0000000..ca51a39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> @@ -0,0 +1,60 @@
> +Broadcom FlexRM Ring Manager
> +============================
> +The Broadcom FlexRM ring manager provides a set of rings which can be
> +used to submit work to offload engines. An SoC may have multiple FlexRM
> +hardware blocks. There is one device tree entry per FlexRM block. The
> +FlexRM driver will create a mailbox-controller instance for given FlexRM
> +hardware block where each mailbox channel is a separate FlexRM ring.
> +
> +Required properties:
> +--------------------
> +- compatible: Should be "brcm,iproc-flexrm-mbox"
> +- reg: Specifies base physical address and size of the FlexRM
> + ring registers
> +- msi-parent: Phandles (and potential Device IDs) to MSI controllers
> + The FlexRM engine will send MSIs (instead of wired
> + interrupts) to CPU. There is one MSI for each FlexRM ring.
> + Refer devicetree/bindings/interrupt-controller/msi.txt
> +- #mbox-cells: Specifies the number of cells needed to encode a mailbox
> + channel. This should be 3.
> +
> + The 1st cell is the mailbox channel number.
> +
> + The 2nd cell contains MSI completion threshold. This is the
> + number of completion messages for which FlexRM will inject
> + one MSI interrupt to CPU.
> +
> + The 3nd cell contains MSI timer value representing time for
> + which FlexRM will wait to accumulate N completion messages
> + where N is the value specified by 2nd cell above. If FlexRM
> + does not get required number of completion messages in time
> + specified by this cell then it will inject one MSI interrupt
> + to CPU provided atleast one completion message is available.
> +
> +Optional properties:
> +--------------------
> +- dma-coherent: Present if DMA operations made by the FlexRM engine (such
> + as DMA descriptor access, access to buffers pointed by DMA
> + descriptors and read/write pointer updates to DDR) are
> + cache coherent with the CPU.
> +
> +Example:
> +--------
> +crypto_mbox: mbox@67000000 {
> + compatible = "brcm,iproc-flexrm-mbox";
> + reg = <0x67000000 0x200000>;
> + msi-parent = <&gic_its 0x7f00>;
> + #mbox-cells = <3>;
> +};
> +
> +crypto_client {
crypto@<addr>
> + ...
> + mboxes = <&crypto_mbox 0 0x1 0xffff>,
> + <&crypto_mbox 1 0x1 0xffff>,
> + <&crypto_mbox 16 0x1 0xffff>,
> + <&crypto_mbox 17 0x1 0xffff>,
> + <&crypto_mbox 30 0x1 0xffff>,
> + <&crypto_mbox 31 0x1 0xffff>;
> + };
> + ...
Please somewhat fully list the contents for node.
Rob
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-04 14:37 ` Rob Herring
0 siblings, 0 replies; 13+ messages in thread
From: Rob Herring @ 2017-01-04 14:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
> This patch adds device tree bindings document for the FlexRM
> ring manager found on Broadcom iProc SoCs.
>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> ---
> .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>
> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> new file mode 100644
> index 0000000..ca51a39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> @@ -0,0 +1,60 @@
> +Broadcom FlexRM Ring Manager
> +============================
> +The Broadcom FlexRM ring manager provides a set of rings which can be
> +used to submit work to offload engines. An SoC may have multiple FlexRM
> +hardware blocks. There is one device tree entry per FlexRM block. The
> +FlexRM driver will create a mailbox-controller instance for given FlexRM
> +hardware block where each mailbox channel is a separate FlexRM ring.
> +
> +Required properties:
> +--------------------
> +- compatible: Should be "brcm,iproc-flexrm-mbox"
> +- reg: Specifies base physical address and size of the FlexRM
> + ring registers
> +- msi-parent: Phandles (and potential Device IDs) to MSI controllers
> + The FlexRM engine will send MSIs (instead of wired
> + interrupts) to CPU. There is one MSI for each FlexRM ring.
> + Refer devicetree/bindings/interrupt-controller/msi.txt
> +- #mbox-cells: Specifies the number of cells needed to encode a mailbox
> + channel. This should be 3.
> +
> + The 1st cell is the mailbox channel number.
> +
> + The 2nd cell contains MSI completion threshold. This is the
> + number of completion messages for which FlexRM will inject
> + one MSI interrupt to CPU.
> +
> + The 3nd cell contains MSI timer value representing time for
> + which FlexRM will wait to accumulate N completion messages
> + where N is the value specified by 2nd cell above. If FlexRM
> + does not get required number of completion messages in time
> + specified by this cell then it will inject one MSI interrupt
> + to CPU provided atleast one completion message is available.
> +
> +Optional properties:
> +--------------------
> +- dma-coherent: Present if DMA operations made by the FlexRM engine (such
> + as DMA descriptor access, access to buffers pointed by DMA
> + descriptors and read/write pointer updates to DDR) are
> + cache coherent with the CPU.
> +
> +Example:
> +--------
> +crypto_mbox: mbox at 67000000 {
> + compatible = "brcm,iproc-flexrm-mbox";
> + reg = <0x67000000 0x200000>;
> + msi-parent = <&gic_its 0x7f00>;
> + #mbox-cells = <3>;
> +};
> +
> +crypto_client {
crypto@<addr>
> + ...
> + mboxes = <&crypto_mbox 0 0x1 0xffff>,
> + <&crypto_mbox 1 0x1 0xffff>,
> + <&crypto_mbox 16 0x1 0xffff>,
> + <&crypto_mbox 17 0x1 0xffff>,
> + <&crypto_mbox 30 0x1 0xffff>,
> + <&crypto_mbox 31 0x1 0xffff>;
> + };
> + ...
Please somewhat fully list the contents for node.
Rob
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
2017-01-04 14:37 ` Rob Herring
(?)
@ 2017-01-05 8:26 ` Anup Patel
-1 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-05 8:26 UTC (permalink / raw)
To: Rob Herring
Cc: Jassi Brar, Mark Rutland, Ray Jui, Scott Branden, Pramod KUMAR,
Rob Rice, Device Tree, Linux Kernel, Linux ARM Kernel,
BCM Kernel Feedback
On Wed, Jan 4, 2017 at 8:07 PM, Rob Herring <robh@kernel.org> wrote:
> On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
>> This patch adds device tree bindings document for the FlexRM
>> ring manager found on Broadcom iProc SoCs.
>>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
>> ---
>> .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> new file mode 100644
>> index 0000000..ca51a39
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> @@ -0,0 +1,60 @@
>> +Broadcom FlexRM Ring Manager
>> +============================
>> +The Broadcom FlexRM ring manager provides a set of rings which can be
>> +used to submit work to offload engines. An SoC may have multiple FlexRM
>> +hardware blocks. There is one device tree entry per FlexRM block. The
>> +FlexRM driver will create a mailbox-controller instance for given FlexRM
>> +hardware block where each mailbox channel is a separate FlexRM ring.
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: Should be "brcm,iproc-flexrm-mbox"
>> +- reg: Specifies base physical address and size of the FlexRM
>> + ring registers
>> +- msi-parent: Phandles (and potential Device IDs) to MSI controllers
>> + The FlexRM engine will send MSIs (instead of wired
>> + interrupts) to CPU. There is one MSI for each FlexRM ring.
>> + Refer devicetree/bindings/interrupt-controller/msi.txt
>> +- #mbox-cells: Specifies the number of cells needed to encode a mailbox
>> + channel. This should be 3.
>> +
>> + The 1st cell is the mailbox channel number.
>> +
>> + The 2nd cell contains MSI completion threshold. This is the
>> + number of completion messages for which FlexRM will inject
>> + one MSI interrupt to CPU.
>> +
>> + The 3nd cell contains MSI timer value representing time for
>> + which FlexRM will wait to accumulate N completion messages
>> + where N is the value specified by 2nd cell above. If FlexRM
>> + does not get required number of completion messages in time
>> + specified by this cell then it will inject one MSI interrupt
>> + to CPU provided atleast one completion message is available.
>> +
>> +Optional properties:
>> +--------------------
>> +- dma-coherent: Present if DMA operations made by the FlexRM engine (such
>> + as DMA descriptor access, access to buffers pointed by DMA
>> + descriptors and read/write pointer updates to DDR) are
>> + cache coherent with the CPU.
>> +
>> +Example:
>> +--------
>> +crypto_mbox: mbox@67000000 {
>> + compatible = "brcm,iproc-flexrm-mbox";
>> + reg = <0x67000000 0x200000>;
>> + msi-parent = <&gic_its 0x7f00>;
>> + #mbox-cells = <3>;
>> +};
>> +
>> +crypto_client {
>
> crypto@<addr>
>
>> + ...
>> + mboxes = <&crypto_mbox 0 0x1 0xffff>,
>> + <&crypto_mbox 1 0x1 0xffff>,
>> + <&crypto_mbox 16 0x1 0xffff>,
>> + <&crypto_mbox 17 0x1 0xffff>,
>> + <&crypto_mbox 30 0x1 0xffff>,
>> + <&crypto_mbox 31 0x1 0xffff>;
>> + };
>> + ...
>
> Please somewhat fully list the contents for node.
>
Sure, I will add more complete example DT node for
mailbox client.
Regards,
Anup
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-05 8:26 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-05 8:26 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, Device Tree, Scott Branden, Ray Jui, Jassi Brar,
Linux Kernel, Pramod KUMAR, BCM Kernel Feedback, Rob Rice,
Linux ARM Kernel
On Wed, Jan 4, 2017 at 8:07 PM, Rob Herring <robh@kernel.org> wrote:
> On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
>> This patch adds device tree bindings document for the FlexRM
>> ring manager found on Broadcom iProc SoCs.
>>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
>> ---
>> .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> new file mode 100644
>> index 0000000..ca51a39
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> @@ -0,0 +1,60 @@
>> +Broadcom FlexRM Ring Manager
>> +============================
>> +The Broadcom FlexRM ring manager provides a set of rings which can be
>> +used to submit work to offload engines. An SoC may have multiple FlexRM
>> +hardware blocks. There is one device tree entry per FlexRM block. The
>> +FlexRM driver will create a mailbox-controller instance for given FlexRM
>> +hardware block where each mailbox channel is a separate FlexRM ring.
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: Should be "brcm,iproc-flexrm-mbox"
>> +- reg: Specifies base physical address and size of the FlexRM
>> + ring registers
>> +- msi-parent: Phandles (and potential Device IDs) to MSI controllers
>> + The FlexRM engine will send MSIs (instead of wired
>> + interrupts) to CPU. There is one MSI for each FlexRM ring.
>> + Refer devicetree/bindings/interrupt-controller/msi.txt
>> +- #mbox-cells: Specifies the number of cells needed to encode a mailbox
>> + channel. This should be 3.
>> +
>> + The 1st cell is the mailbox channel number.
>> +
>> + The 2nd cell contains MSI completion threshold. This is the
>> + number of completion messages for which FlexRM will inject
>> + one MSI interrupt to CPU.
>> +
>> + The 3nd cell contains MSI timer value representing time for
>> + which FlexRM will wait to accumulate N completion messages
>> + where N is the value specified by 2nd cell above. If FlexRM
>> + does not get required number of completion messages in time
>> + specified by this cell then it will inject one MSI interrupt
>> + to CPU provided atleast one completion message is available.
>> +
>> +Optional properties:
>> +--------------------
>> +- dma-coherent: Present if DMA operations made by the FlexRM engine (such
>> + as DMA descriptor access, access to buffers pointed by DMA
>> + descriptors and read/write pointer updates to DDR) are
>> + cache coherent with the CPU.
>> +
>> +Example:
>> +--------
>> +crypto_mbox: mbox@67000000 {
>> + compatible = "brcm,iproc-flexrm-mbox";
>> + reg = <0x67000000 0x200000>;
>> + msi-parent = <&gic_its 0x7f00>;
>> + #mbox-cells = <3>;
>> +};
>> +
>> +crypto_client {
>
> crypto@<addr>
>
>> + ...
>> + mboxes = <&crypto_mbox 0 0x1 0xffff>,
>> + <&crypto_mbox 1 0x1 0xffff>,
>> + <&crypto_mbox 16 0x1 0xffff>,
>> + <&crypto_mbox 17 0x1 0xffff>,
>> + <&crypto_mbox 30 0x1 0xffff>,
>> + <&crypto_mbox 31 0x1 0xffff>;
>> + };
>> + ...
>
> Please somewhat fully list the contents for node.
>
Sure, I will add more complete example DT node for
mailbox client.
Regards,
Anup
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager
@ 2017-01-05 8:26 ` Anup Patel
0 siblings, 0 replies; 13+ messages in thread
From: Anup Patel @ 2017-01-05 8:26 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 4, 2017 at 8:07 PM, Rob Herring <robh@kernel.org> wrote:
> On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
>> This patch adds device tree bindings document for the FlexRM
>> ring manager found on Broadcom iProc SoCs.
>>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
>> ---
>> .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt | 60 ++++++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> new file mode 100644
>> index 0000000..ca51a39
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
>> @@ -0,0 +1,60 @@
>> +Broadcom FlexRM Ring Manager
>> +============================
>> +The Broadcom FlexRM ring manager provides a set of rings which can be
>> +used to submit work to offload engines. An SoC may have multiple FlexRM
>> +hardware blocks. There is one device tree entry per FlexRM block. The
>> +FlexRM driver will create a mailbox-controller instance for given FlexRM
>> +hardware block where each mailbox channel is a separate FlexRM ring.
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: Should be "brcm,iproc-flexrm-mbox"
>> +- reg: Specifies base physical address and size of the FlexRM
>> + ring registers
>> +- msi-parent: Phandles (and potential Device IDs) to MSI controllers
>> + The FlexRM engine will send MSIs (instead of wired
>> + interrupts) to CPU. There is one MSI for each FlexRM ring.
>> + Refer devicetree/bindings/interrupt-controller/msi.txt
>> +- #mbox-cells: Specifies the number of cells needed to encode a mailbox
>> + channel. This should be 3.
>> +
>> + The 1st cell is the mailbox channel number.
>> +
>> + The 2nd cell contains MSI completion threshold. This is the
>> + number of completion messages for which FlexRM will inject
>> + one MSI interrupt to CPU.
>> +
>> + The 3nd cell contains MSI timer value representing time for
>> + which FlexRM will wait to accumulate N completion messages
>> + where N is the value specified by 2nd cell above. If FlexRM
>> + does not get required number of completion messages in time
>> + specified by this cell then it will inject one MSI interrupt
>> + to CPU provided atleast one completion message is available.
>> +
>> +Optional properties:
>> +--------------------
>> +- dma-coherent: Present if DMA operations made by the FlexRM engine (such
>> + as DMA descriptor access, access to buffers pointed by DMA
>> + descriptors and read/write pointer updates to DDR) are
>> + cache coherent with the CPU.
>> +
>> +Example:
>> +--------
>> +crypto_mbox: mbox at 67000000 {
>> + compatible = "brcm,iproc-flexrm-mbox";
>> + reg = <0x67000000 0x200000>;
>> + msi-parent = <&gic_its 0x7f00>;
>> + #mbox-cells = <3>;
>> +};
>> +
>> +crypto_client {
>
> crypto@<addr>
>
>> + ...
>> + mboxes = <&crypto_mbox 0 0x1 0xffff>,
>> + <&crypto_mbox 1 0x1 0xffff>,
>> + <&crypto_mbox 16 0x1 0xffff>,
>> + <&crypto_mbox 17 0x1 0xffff>,
>> + <&crypto_mbox 30 0x1 0xffff>,
>> + <&crypto_mbox 31 0x1 0xffff>;
>> + };
>> + ...
>
> Please somewhat fully list the contents for node.
>
Sure, I will add more complete example DT node for
mailbox client.
Regards,
Anup
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2017-01-05 8:27 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-04 5:34 [PATCH v3 0/2] Broadcom FlexRM ring manager support Anup Patel
2017-01-04 5:34 ` Anup Patel
2017-01-04 5:34 ` [PATCH v3 1/2] mailbox: Add driver for Broadcom FlexRM ring manager Anup Patel
2017-01-04 5:34 ` Anup Patel
2017-01-04 5:34 ` Anup Patel
2017-01-04 5:34 ` [PATCH v3 2/2] dt-bindings: Add DT bindings info for " Anup Patel
2017-01-04 5:34 ` Anup Patel
2017-01-04 5:34 ` Anup Patel
2017-01-04 14:37 ` Rob Herring
2017-01-04 14:37 ` Rob Herring
2017-01-05 8:26 ` Anup Patel
2017-01-05 8:26 ` Anup Patel
2017-01-05 8:26 ` Anup Patel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.