From: "M'boumba Cedric Madianga" <cedric.madianga@gmail.com> To: wsa@the-dreams.de, robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, linus.walleij@linaro.org, patrice.chotard@st.com, linux@armlinux.org.uk, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, u.kleine-koenig@pengutronix.de Cc: "M'boumba Cedric Madianga" <cedric.madianga@gmail.com> Subject: [PATCH v10 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC Date: Thu, 19 Jan 2017 14:25:14 +0100 [thread overview] Message-ID: <1484832316-5594-4-git-send-email-cedric.madianga@gmail.com> (raw) In-Reply-To: <1484832316-5594-1-git-send-email-cedric.madianga@gmail.com> This patch adds I2C1 support for STM32F429 SoC Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> --- arch/arm/boot/dts/stm32f429.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e4dae0e..5b063e9 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -48,6 +48,7 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> / { clocks { @@ -153,6 +154,18 @@ status = "disabled"; }; + i2c1: i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + usart7: serial@40007800 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; @@ -355,6 +368,16 @@ slew-rate = <2>; }; }; + + i2c1_pins_b: i2c1@0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; }; rcc: rcc@40023810 { -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: cedric.madianga@gmail.com (M'boumba Cedric Madianga) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC Date: Thu, 19 Jan 2017 14:25:14 +0100 [thread overview] Message-ID: <1484832316-5594-4-git-send-email-cedric.madianga@gmail.com> (raw) In-Reply-To: <1484832316-5594-1-git-send-email-cedric.madianga@gmail.com> This patch adds I2C1 support for STM32F429 SoC Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> --- arch/arm/boot/dts/stm32f429.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e4dae0e..5b063e9 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -48,6 +48,7 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> / { clocks { @@ -153,6 +154,18 @@ status = "disabled"; }; + i2c1: i2c at 40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + usart7: serial at 40007800 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; @@ -355,6 +368,16 @@ slew-rate = <2>; }; }; + + i2c1_pins_b: i2c1 at 0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; }; rcc: rcc at 40023810 { -- 1.9.1
next prev parent reply other threads:[~2017-01-19 13:28 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-19 13:25 [PATCH v10 0/5] Add support for the STM32F4 I2C M'boumba Cedric Madianga 2017-01-19 13:25 ` M'boumba Cedric Madianga 2017-01-19 13:25 ` [PATCH v10 1/5] dt-bindings: Document the STM32 I2C bindings M'boumba Cedric Madianga 2017-01-19 13:25 ` M'boumba Cedric Madianga 2017-01-25 20:24 ` Wolfram Sang 2017-01-25 20:24 ` Wolfram Sang 2017-01-19 13:25 ` [PATCH v10 2/5] i2c: Add STM32F4 I2C driver M'boumba Cedric Madianga 2017-01-19 13:25 ` M'boumba Cedric Madianga 2017-01-19 13:31 ` Uwe Kleine-König 2017-01-19 13:31 ` Uwe Kleine-König 2017-01-25 20:25 ` Wolfram Sang 2017-01-25 20:25 ` Wolfram Sang 2017-01-25 21:03 ` Uwe Kleine-König 2017-01-25 21:03 ` Uwe Kleine-König 2017-01-19 13:25 ` M'boumba Cedric Madianga [this message] 2017-01-19 13:25 ` [PATCH v10 3/5] ARM: dts: stm32: Add I2C1 support for STM32F429 SoC M'boumba Cedric Madianga 2017-01-25 20:25 ` Wolfram Sang 2017-01-25 20:25 ` Wolfram Sang 2017-01-25 21:02 ` M'boumba Cedric Madianga 2017-01-25 21:02 ` M'boumba Cedric Madianga 2017-01-19 13:25 ` [PATCH v10 4/5] ARM: dts: stm32: Add I2C1 support for STM32429 eval board M'boumba Cedric Madianga 2017-01-19 13:25 ` M'boumba Cedric Madianga 2017-01-19 13:25 ` [PATCH v10 5/5] ARM: configs: stm32: Add I2C support for STM32 defconfig M'boumba Cedric Madianga 2017-01-19 13:25 ` M'boumba Cedric Madianga 2017-04-03 14:36 ` Alexandre Torgue 2017-04-03 14:36 ` Alexandre Torgue 2017-04-03 14:36 ` Alexandre Torgue
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1484832316-5594-4-git-send-email-cedric.madianga@gmail.com \ --to=cedric.madianga@gmail.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mcoquelin.stm32@gmail.com \ --cc=patrice.chotard@st.com \ --cc=robh+dt@kernel.org \ --cc=u.kleine-koenig@pengutronix.de \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.