From: Andrew Murray <amurray@embedded-bits.co.uk> To: linux-omap@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>, Paul Walmsley <paul@pwsan.com>, Andrew Murray <amurray@embedded-bits.co.uk>, linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option Date: Sat, 21 Jan 2017 17:36:55 +0000 [thread overview] Message-ID: <1485020215-6550-1-git-send-email-amurray@embedded-bits.co.uk> (raw) The 'mpurate' option, historically used for specifying an initial MPU rate at boot, no longer has any effect due to the supporting code being removed as it was 'wrong and dangerous' [1]. This patch removes the remaining dead code associated with the __setup macros to avoid confusion and reduce bloat. [1] https://patchwork.kernel.org/patch/5954631/ Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> --- arch/arm/mach-omap1/clock.c | 20 -------------------- arch/arm/mach-omap1/clock.h | 2 -- arch/arm/mach-omap2/clock.c | 20 -------------------- 3 files changed, 42 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 4f5fd4a..43e3e18 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -720,26 +720,6 @@ EXPORT_SYMBOL(clk_get_parent); * OMAP specific clock functions shared between omap1 and omap2 */ -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - /* Used for clocks that always have same value as the parent clock */ unsigned long followparent_recalc(struct clk *clk) { diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 1e4918a..f2d1be2 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -173,8 +173,6 @@ struct clk_functions { void (*clk_disable_unused)(struct clk *clk); }; -extern int mpurate; - extern int clk_init(struct clk_functions *custom_clocks); extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d058125..d999295 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -112,26 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -static int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - /** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator -- 2.5.0
WARNING: multiple messages have this Message-ID (diff)
From: amurray@embedded-bits.co.uk (Andrew Murray) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option Date: Sat, 21 Jan 2017 17:36:55 +0000 [thread overview] Message-ID: <1485020215-6550-1-git-send-email-amurray@embedded-bits.co.uk> (raw) The 'mpurate' option, historically used for specifying an initial MPU rate at boot, no longer has any effect due to the supporting code being removed as it was 'wrong and dangerous' [1]. This patch removes the remaining dead code associated with the __setup macros to avoid confusion and reduce bloat. [1] https://patchwork.kernel.org/patch/5954631/ Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> --- arch/arm/mach-omap1/clock.c | 20 -------------------- arch/arm/mach-omap1/clock.h | 2 -- arch/arm/mach-omap2/clock.c | 20 -------------------- 3 files changed, 42 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 4f5fd4a..43e3e18 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -720,26 +720,6 @@ EXPORT_SYMBOL(clk_get_parent); * OMAP specific clock functions shared between omap1 and omap2 */ -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - /* Used for clocks that always have same value as the parent clock */ unsigned long followparent_recalc(struct clk *clk) { diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 1e4918a..f2d1be2 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -173,8 +173,6 @@ struct clk_functions { void (*clk_disable_unused)(struct clk *clk); }; -extern int mpurate; - extern int clk_init(struct clk_functions *custom_clocks); extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index d058125..d999295 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -112,26 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -static int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - /** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator -- 2.5.0
next reply other threads:[~2017-01-21 17:36 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-21 17:36 Andrew Murray [this message] 2017-01-21 17:36 ` [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option Andrew Murray 2017-01-23 15:10 ` Tony Lindgren 2017-01-23 15:10 ` Tony Lindgren 2017-01-23 19:51 ` Andrew Murray 2017-01-23 19:51 ` Andrew Murray 2017-01-23 20:34 ` Tony Lindgren 2017-01-23 20:34 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1485020215-6550-1-git-send-email-amurray@embedded-bits.co.uk \ --to=amurray@embedded-bits.co.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=paul@pwsan.com \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.