From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 5/9] arm: dts: imx6ul-isiot: Add FEC node
Date: Fri, 27 Jan 2017 09:54:43 +0100 [thread overview]
Message-ID: <1485507287-3327-6-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1485507287-3327-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add FEC node for Engicam Is.IoT MX6UL module.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/imx6ul-isiot.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/dts/imx6ul-isiot.dtsi b/arch/arm/dts/imx6ul-isiot.dtsi
index 1a474ca..346079a 100644
--- a/arch/arm/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/dts/imx6ul-isiot.dtsi
@@ -56,6 +56,13 @@
};
};
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -86,6 +93,21 @@
};
&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
--
1.9.1
next prev parent reply other threads:[~2017-01-27 8:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 8:54 [U-Boot] [PATCH v4 0/9] imx6ul: Add Engicam Is.IoT MX6UL support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 1/9] configs: imx6: Don't define USDHC2_BASE_ADDR Jagan Teki
2017-01-27 12:27 ` Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 2/9] arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support Jagan Teki
2017-01-27 12:38 ` Stefano Babic
2017-01-27 15:55 ` Jagan Teki
2017-01-28 12:25 ` Stefano Babic
2017-01-28 12:39 ` Michael Nazzareno Trimarchi
2017-01-30 9:41 ` Jagan Teki
2017-01-30 10:14 ` Stefano Babic
2017-01-28 13:43 ` Tom Rini
2017-01-27 8:54 ` [U-Boot] [PATCH v4 3/9] arm: dts: imx6ul-isiot: Add I2C nodes Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 4/9] imx6: isiotmx6ul: Add I2C support Jagan Teki
2017-01-27 14:18 ` Stefano Babic
2017-01-27 8:54 ` Jagan Teki [this message]
2017-01-27 14:18 ` [U-Boot] [PATCH v4 5/9] arm: dts: imx6ul-isiot: Add FEC node Stefano Babic
2017-01-27 8:54 ` [U-Boot] [PATCH v4 6/9] imx6: isiotmx6ul: Add FEC support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 7/9] imx6: isiotmx6ul: Add NAND support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 8/9] imx6: isiotmx6ul: Add nandboot env support Jagan Teki
2017-01-27 8:54 ` [U-Boot] [PATCH v4 9/9] imx6ul: isiotmx6ul: Enable I2C support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485507287-3327-6-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.